Row and Column Formulas on a Data Form

I am creating a data form which has both row and column formulas. I would like the row formulas to show for some of the cells but it seems to default to the column formula.
How can I get my form to show the row formula result and not the column formula result?
Thank you!

Brian,
See this example:
http://htmldb.oracle.com/pls/otn/f?p=31517:160
There are also a coupleof others showing the same thing you want to achive.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://htmldb.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Similar Messages

How can i open a PDF bank statement in numbers so that the rows and columns contain properly aligned data from statement?

how can i open a PDF bank statement in "numbers" so that the rows and columns contain properly aligned data from statement?

Numbers can store pdfs pages or clippings but does not directly open pdf files. To get the bank statement into Numbers as a table I would open the bank statment in Preview (or Skim) or some pdf viewer.
Then hold the option key while selecting a column of data.
Then copy
Then switch to numbers and paste the column into a table
Then repeat for the other columns in the pdf document
It would be easier (in my opinion) to download the QFX or CSV version from your bank

Suppress Overall result (both rows and columns side and its data)

Hello all,
I need to do some settings in BEx Query Designer, so that In BEx Analyzer, I don't see 'overall result' both on 'rows' and 'column' sides
This is what I have done so far
In 'rows' section, Properties of my KF (no. Products) then 'calculation' tab 'calculate result as'=Suppress result
This way in BEx Analyzer I don't see the FIGURES/DATA for 'Result' and 'overall result' BUT 'result' and 'overall result' still exist both on rows and colum side even if there are not figures in them.
Is there any property in BEx Designer so that I don't see 'overall result' at all
Best regards
Ahmad

thanks for responding
selecting a characteristic, properties, Display tab, Result lines: Always Suppress
with this I don't see 'result'
but 'overall result' result exist both on 'rows' and 'column' side alongwith its data.
If I combine the above with this: selecting KF, properties, calucations, Calculate result as: Suppress result
then
I don't see the data in 'overall result' BUT 'overall result' still exist both on rows and column sides
any setting so that 'overall result' completely vanishes
Best regards
Ahsan

Maximum number of rows and columns in data form

Hi,
I wanted to know if there is a limitation to the number of rows and columns that can be displayed in a data form, in Hyperion planning 11.1.2.1 ?
And what would be the most appropriate number of rows and columns to be included for optimum performance.
Thanks.

Hi,
While its a fun fact to determine how much one can stuff into a web form, the reality is: how much can a user reasonably consume in a web form?
And what would be the most appropriate number of rows and columns to be included for optimum performance
You will find that the answer to this is by "what design makes a web form most usable?" And no, the users don't really know what they want from a design perspective, they see it in their head, but usually what they ask for is something that would look entirely different (huge).
The next thing to think about is the use of member selection functions in the page axis. IDescendants(Entity) in a dropdown could cause issues just as easily as too many rows - and again make the drop down unusable for a user.
If your question is a bit more technical, then consider this (somewhat oversimplified): Web forms are constructed by a process on the server. Objects are created based on the form's definition and used by the process that builds the form. The process uses Cartesian looping (lots of iterations) to construct the form cell by cell, starting at the top left and finishing up in the bottom right. If the form has a million cells on it, then the loop and all the code within it runs a million times. The capability of the server has a lot to do with how well it can handle this request, and how many it can handle at one time.
The result of this is gobs of HTML and JavaScript. All of this has to be sent over a network to the requesting client. The client starts receiving the web page code and has to render it in the browser and run the JavaScript. The ability to do this is limited by the browser, the OS, and the hardware that the client is running on.
And that's just rendering the page for use.
Now it has to be interacted with on the client machine, and changes parsed, packaged, and sent back to the server.
So the technical answer is, there can be many limitations to how many rows and columns a data form can have - none of which can truly be anticipated by anyone. This is why I put the part about usability first in this post.
Regards,
Robb Salzmann

Exporting data in rows and columns and loading in RDBMS

I have a scenario wherein i want to export data from HyperionEssbase in rows and coulmns and load it intoRDBMS. I can load data into RDBMS using informatica if theflat file exported is in form of rows and columns.But when i exportthe file using Hyperion Essbase 9 i get it in from of alldimensions and then the fact value which is not how i want. I wantdata in relational from in flat file itself(row,column).Looking forard to your suggestions..Thanks in advance..

Thanks willjordan and twakim for yoursuggestions.. I tried both the techniques and both worked...With reference to the technique suggested by twakim , I was able to use that in Hyperion Essbase 9..But in myreal scenario the cube is in Hyperion Essbase 6.5.4.2..Can i usethis Custom defined functions in Hyperion Essbase 6.5.4.2..and ifso how as there is no concept of Analytical server there??? Please help me in this issue???

Web Form :Number of rows and columns

Hi All,
I have a web form with many rows and columns . Is it possible for a user to view only a limited rows in the form ? Not using Adhoc/Analyze option . since there are formula rows which wont appear in Analyze grid.
The user want to see only 5 to 10 random rows in the form ? How to do this ?
Please help.

I remember an option in 11.1 which allows users to dynamically add rows and I cannot find that in 11.1.2.2
I think the user will have to always update the user variable to what he want to see.
Regards
Celvin
http://www.orahyplabs.com
http://docs.oracle.com/cd/E17236_01/epm.1112/planning_admin_11122300/frameset.htm?launch.html

How to display 2 dimensional data. i.e with rows and columns?

Hi,
I want to know how to display multiple, variable
rows and columns that are got from the database through
queries in forms.
(i,e. a Matrix of Values,something similar to an Excel Spreadsheet).
Is there a component in forms similar to JTABLE that is
available in Java through which MULTIPLE, VARIABLE
rows and columns can be displayed ?.
I am not using a base table since this data is got thru
a number of packages and procedures that are used in
Loops.
NOTE : I am using forms 6i.
Thanks
Sharath.

I've heard Grant mention adding a Grid component to the Forms toolbox. From the context I would guess this is not yet even under development, so it's not going to be available anytime soon. And not for 6i.
Sorry, APC

Formulas results outside of row and column axis

The report has an area of row axis and column axis. This area is where the results from BW are displayed.
We have a requirement where we would have to create formulas using the BW Analyzer results of the row axis and column axis and display the results after the last row of this area.
For example, after the BW Analyzer displays the result area to the Excel, we are required to take Excel Cell D10 * C7 and put the results to B33.
B33 = D10*C11
Excel row 30 is the last row from the row axis result area.
I have searched through the forum for Cell Editor, but it seems that the requirement is to use 2 structures and use Cell Editor only when there is a formula collision. Our requirement has 1 structure, but I guess we can create the other structure for the column axis results. But still I think Cell Editor is a computation of formula collision within the row and column axis result area.
My question is will Cell Editor meet our requirement if we want to get formula results from the row and column axis and then display the results outside of the row and column axis result area?
Our approach was to use the Excel cell formulas in the workbook or possibly macros, but it seems that the Excel formulas will do.
Would someone clarify about the Cell editor for this requirement and how would you approach this?
Would this be effective to do the formulas from the query level? We are working on 3.5 SP11.

Can Cell editor do the following:
1. Create structures
2. Run the query
3. The results of the structures are displayed in the row and column axis of the BEx Analyzer
4. Save as a workbook
5. Use the Cell Editor to pick and choose the cells (Not the Excel cells) to create formulas
6. The formula results are then displayed outside of the row and column axis.
Would this be another approach?
What scenario can Cell editor be used? What scenario can Cell editor not be used?
Thanks

Rows and column limit on Data Grids

Hello,
anyone know if there's a limit for the number of rows and columns per page in the Data Grids?
Thanks in advance

There is not a limit. There is a default of 1024 rows, but you can change this.
-- Chris

How to save data from JTable multiple rows and columns

Hi Y_Not thanks for your help before...
But what should I do if I want to get/save many data from many column and rows??

i don't quite understand your (repeated) question. what is the problem with "multiple rows and columns". Y_NOT and i have shown you ways to access them.
all you need are 2 loops: one around your number of rows and one around the number of columns or vice versa depending in which order you want to save things:
for (int col = 0; col < data.size(); col++) {
 for (int row = 0 ; row < data[col].size(); row++) {
 // save your data
 saveData(data[col].getElementAt(row));
 // or use yourtable.getValueAt(row, col);
}this is not a problem of Swing/Java but of simple algorithm...
thomas

Is it possible to switch the rows and columns?

Is it possible to switch the rows and columns of a table? The reason I ask is that it would be easier for me to input the data with the number at the top of a column and the fields going down. But it would be easier to read the data with the number on the left and the fields going to the right. Is it possible to switch a table in this way?

mahongue wrote:
Is it possible to switch the rows and columns of a table? The reason I ask is
that it would be easier for me to input the data with the number at the top
of a column and the fields going down. But it would be easier to read the
data with the number on the left and the fields going to the right. Is it
possible to switch a table in this way?
It sounds to me as though you wish to transpose a table so that the original is changed from rows to columns and from columns to rows, as in the following:
Table 1
 A B C
========
1 o p q
2 r s t
3 u v w
Table 2
 A B C
========
1 o r u
2 p s v
3 q t w
You are right - it would be nice to have a menu item to magically transpose a selected block of cells. But there isn't one. So...
One way to solve this is to use the index() and transpose() functions to accomplish row and column cell transposition. If you are going to use a 1:1 cell correspondence and change the header columns and rows also, you can use this:
 =INDEX(TRANSPOSE(Table # :: <range>),ROW(),COLUMN())
where Table # and <range> is substituted as in the following fashion:
 =INDEX(TRANSPOSE(Table 1 :: $A$1:$C$3),ROW(),COLUMN())
Create a second table. Copy the modified formula above with the appropriate substitutions, select the range you wish to have your transposition inserted into (must match the transposed cell dimensions of the original range), paste the forumula and voila! the cells will be transposed.
Cautions:
o The target table must match the swapped cell length and width dimension. For example, if the original data range is 6 columns wide by 4 rows deep, then the corresponding table or range to hold the transposition must be 4 columns wide by 6 rows deep.
o If your transposed data block is to be offset from the origin of the new table, then you will need to include a subtractive offset into your cell formula, since in the transpose() function the data in the master data range is referenced from its position with the master range, not its cell position in the table. Such an offset is necessary because this example formula uses the target row and column numbers to arrive at indexed positions.
For example, if the new data range is to be offset one column to the right and one row below from the target table's origin then you must subtract (-1) from the cell and from the column references in the formula:
 Example:
 =INDEX(TRANSPOSE(Table 3 :: $B$2:$D$4),ROW()-1,COLUMN()-1)
If someone has a better solution I'd be glad to hear of it.

Getting Row and Column in ADF RC

Hi,
I have an ADF RC form with a table control on it. I need to find the row and column of the cell where the user has clicked. I am able to get the row using getSelectedRow() but am not able to get the column of the cell. Could anyone please help?
Thanks & Regards,
Mike

Hi Frank,
I need the coordinates. eg. My table is something like this
Country Region City Value1 Value2 Value3 Total
AAAAA BBBBB XXX 10 15 30 55
EEEEE YYY 5 2 15 22
TOTAL 15 17 45 77
etc.
If the user clicks on any cell in the country column he can add countries, if he clicks on any cell in the region column, he can add regions. The behavior changes for value1, value2, value3... if he clicks in any of these columns he can add value4, value5 columns. If he clicks on the actual data, he gets another screen.
Thanks & Regards,
Mike

How can I make Numbers respect the row and column locks in an Excel workbook opened in Numbers???

I have a Windows server app that generates Excel workbooks to be emailed to political campaign volunteers to be loaded into Numbers on an iPad, edited, then emailed back to be posted to the server database. There are two problems encountered:
1. The Excel workbook has the first row (column headings) and first column (route identifier) of cells locked, so that they will not scroll off the screen, but Numbers doesn't respect the locks, so when the user scrolls horizontally or vertically, the column headings and/or the route identifier scroll off the screen.
2. The Excel workbook has pop-up "tool-tip" type comments in certain column headings in order to provide the user with the acceptable entries for those columns, but Numbers does not respect those. When the user touches any of the commented column heading cells, a context menu appears instead of the comment.
What must I do in the Excel workbook sheets, or what settings can be made in Numbers to correct the above?

I imported a Numbers '09 file into Numbers on the iPad. All comments were removed during import. Frozen header row and column were retained.
Thank you for your responses I must ask, however, when you refer to "importing" the Excel file, are you referring to a two step process whereby the Excel file is first converted by some other process into Numbers format, then opened in the Numbers application - which is what I have to do in my PC application to generate the Excel file, and reverse that process to convert the Excel back into my database format - or are you simply referring to opening the file in Numbers as "importing" it? And please excuse any ignorance, as I'm not at all familiar with Apple's terminologies. In fact, I don't own an iPad myself, but rather I have to depend on one of my clients to do the testing for me.
I imported an XLSX file into Numbers on the iPad. The file used "freeze panes" to "freeze" the first column and row. Only warning on import was that it changed fonts. It imported without the first row and column frozen and with no comments. Nothing I can do about the missing comments but it was a simple matter to turn the first column & row into headers and freeze them.
Unfortunately this would not be an efficient solution, since the end users are, for the most part, elderly political campaign volunteers who are fairly computer illiterate. These workbooks are actually canvassing lists - known as walklists. Their purpose is for the volunteers to interview voters, record the results of the interviews, and post the results to a database, which provides the campaigns with valuable strategizing capabilities. Also, these workbooks have multiple pages - as many as 10 or more. and from what I infer from the above, the setting changes would have to be made on each page.
My whole intent in developing this iPad/Tablet methodology was to significantly reduce volunteer's work - which is a recruitment benefit - and eliminate paper. While the latter would be accomplished, the former would not, and in fact would tend to increase it. It's necessary to keep the first row - column headings - and the first column - the route identifier - from scrolling off the page, so that the volunteer won't have to keep scrolling up and down and right and left to know what the data are.
Conclusion: Comments are not supported on the iPad version of Numbers. Frozen headers are not imported from Excel but can be recreated easily.
I was previously directed to the Apple website http://www.apple.com/ipad/from-the-app-store/apps-by-apple/numbers.html which extols the wonders of the Numbers application. About halfway down the page there's a section regarding, "Sliders steppers and pop-ups". The web page states that pop-ups can be set up but, being a marketing site, gives no indication whatsoever as to how it's done. I was hoping someone could tell my if there's any way to carry them over from an Excel file.

Row and Column Template in Hyperion Reporting

Hi
Whenver I am trying to save a column of a report as a template , it is giving an error :
"The selected columns contain one or more of the items below that cannot be included in templates:
Invalid Input "
I am not sure what does this mean. Though I have already deselected the "Link to Source Object". Can anyone suggest ?

it may also worth cross checking below form doc:
a.If your row and column template contains formulas with external references (for
example, to cells outside of the selected row and column template), you are prompted
to modify those formulas before saving the row or column template.
Note: You can save a row and column template that contains cell formulas, as these can
be discarded. For more information, see step 9.c on page 115.
b. If a secondary database connection was specified within the row and column template,
a dialog box displays prompting you to continue saving the template. If you save the
template, the secondary database connection you specified in the row and column
template is discarded. The primary database connection is then used for the row and
column template.
c. If unsupported properties are found, an Information dialog box presents a list of
properties to discard before saving the template. For example, if the row and column
template contains a cell formula, you can choose to save the template without the
formula or not save the template.

Hyperion Reports - Row and Column templates

Sorry if this may be a bit basic but we are new to Hyperionreports. Currently we are going through a redesign process and washoping to get some viewpoints on the benefits of using row andcolumn templates within reports. I am looking at this option butgetting frustrated by the limitations around formatting, etc Are there any views out there on the preferred options. We havea particular style in design we need to include which is becomingdifficult when we use row and column templates

it may also worth cross checking below form doc:
a.If your row and column template contains formulas with external references (for
example, to cells outside of the selected row and column template), you are prompted
to modify those formulas before saving the row or column template.
Note: You can save a row and column template that contains cell formulas, as these can
be discarded. For more information, see step 9.c on page 115.
b. If a secondary database connection was specified within the row and column template,
a dialog box displays prompting you to continue saving the template. If you save the
template, the secondary database connection you specified in the row and column
template is discarded. The primary database connection is then used for the row and
column template.
c. If unsupported properties are found, an Information dialog box presents a list of
properties to discard before saving the template. For example, if the row and column
template contains a cell formula, you can choose to save the template without the
formula or not save the template.

Row and Column Formulas on a Data Form

Similar Messages

Maybe you are looking for