Row in table acting as a footer row even though it's not

I have a form that is a series of 38 tables. Each table is wrapped in a subform. Each table has a header row and at least 4, but up 44 body rows. My problem is that on some (about a 1/3) of the tables the last row (that consists of a series of radio buttons and is also wrapped in a subform) is acting kind of like a footer, but one that always stays with the first group of 4 rows. I have tried everything I can think of and 1) there is no difference I can see between the tables that behave properly and the tables that don’t, and 2) I have tried many variations of deleting and adding back the offending row to no avail. The bad behaviour remains.
The offending row Pagination is set to:
Place - Following Previous,
Keep With – Previous
After – Continue Filling Parent
I have changed the Keep With to Next and blank with no change in behavior.  I’m attaching a picture so you can see that clicking on the radio button highlights buttons in two rows.

You can get the Swedish version from http://www.mozilla.com/en-US/firefox/all.html

Similar Messages

  • Select for update returns no rows even though there is no locking thread

    I'm using Ibatis library over oracle sql for my query. The select for update statement returns no rows. This happens intermittently. When this was happening last time, I executed the select statement on sqldeveloper (but without the 'for update') and got rows. This situation is not easily reproducible so I've not yet been able to ascertain whether rows are returned on sqldeveloper with the 'for update' clause. But I know for sure that there was no other thread locking the rows. How could this be happening?

    The select for update statement returns no rowsWhy do you think that a select for update will always return rows?
    the for update clause if there not to garantee the presence of rows but to lock the row when it is present
    sql> select * from t;
             A          B C
             1          1 step1
             2          2 step2
             3          3 step3Then session 1 issues the following select
    SELECT     *
          FROM t
         WHERE a = 1
    FOR UPDATE NOWAIT;If session 2 issues the same select before session 1 commits or rolls back
    SELECT     *
          FROM t
         WHERE a = 1
    FOR UPDATE NOWAIT;It will get the following error
    ERROR at line 1:
    ORA-00054: resource busy and acquire with NOWAIT specifiedBut if session 2 issue such a kind of select
    sql> SELECT     *
      2        FROM t
      3       WHERE a = 99
      4  FOR UPDATE NOWAIT;
    no rows selectedYou see then that a select for update can return no rows
    Best Regards
    Mohamed Houri

  • Number of tables in New Dataclass is 0 even though new tables are activated

    Hi friends,
    I created a new data class by creating new table space.
    And i assigned 3 tables to this new Dataclass and activated successfully.
    But when i got to STO4 or DBACOCKPIT tcode and see number of tables under 'DATACLASS' its showing as 0.
    I checked table which stores technical settings of table -DD09L
    under new dataclass it has the 3 tables.
    Why is it that this is not updated thru ST04 and DBACOCKPIT?
    Any inputs on this is highly appreciated.
    Regards,
    Simha

    problem resolved

  • Tables can be maintained even though Client has status 'not modifiable" ?

    I am looking, list of tables which i can maintain directly even though "Client has status 'not modifiable'" status
    example : T000
    Rgds

    No ..No...Siddesh,
    You are understanding my requirement in reverse.
    We are now not in execution of giving the access.
    i regret, if i am failing to explain my requirement
    A Auditor wants
    a). He wanted to know the users having S_TABU_DIS auth object with 02 value and assigned authroization groups.
    b). He wanted list of tables including Z tables that can be maintained directly thru maintenance view
    Auditor will do some excerse Directly Maintained Tables (vs) Authroized users
    He will come back with a list of tables for which we have to give the logs.
    I tried my best to explain my requirement.
    To summarise  - I repeat  i am looking  "List of Tables that can be maintained directly - When Client has status 'not modifiable" ?
    Thanks in advance for your time for this query.
    Rgds

  • "Include Header Row in Subsequent Pages" is not working for table

    Hi,
    I'm using version 8.1.2.3337.1.509884.
    The pagnation feature "Include Header Row in Subsequent Pages" is not working for any table in my design. ( the check-box can not be checked no matter how many times I clicking it)
    I put such table already in a flow bodypage.
    Any similar issue reported?
    Any suggestions?
    Thanks.
    -Vicky

    Hi Raghu,
    Appologies that I uploaded a wrong version of xdp file yesterday.
    Here is the correct one.
    https://acrobat.com/#d=jr0XffvBZWXd0cVhL0OQ3A
    I totally understand that I have to check the checkbox "Include Header Row in Subsequent Pages".
    My problem is that, although I can see that checkbox, and it's not grey-out, I can not tick it. See below screenshot, with the red-cycle mark.
    You can try with above file.
    Just wondering why such weird behavior happened.
    -Vicky

  • Delete Rows from T1 which are Not in T2

    Hi
    I've 2 Tables like below
    T1
    N1
    N2
    2
    11
    2
    22
    3
    33
    8
    44
    8
    88
    T2
    N1
    N2
    2
    22
    8
    88
    If I Run Delete query, I must delete Rows from T1 which are Not in T2
    For example, I must delete Rows 1,3,4 from T1
    So how to write that delete query? Please advice

    Delete from T1
    Where not Exists (select * from T2 Where t1.N1=t2.N1 and t1.N2=t2.N2)
    --or
    Delete t
    From t1 t
    left JOIN t2 m
    ON m.N1=t.N1 and m.N2=t.N2
    WHERE m.N1 is null and m.N2 is null
    --Or
    ;With mycte as
    select N1,N2 from T1
    Except
    select N1,N2 from T2
    Delete t
    From t1 t
    INNER JOIN mycte m
    ON m.N1=t.N1 and m.N2=t.N2

  • Bottom row of the keyboard is not working in a vertical orientation on the iPhone 3Gs. the "slide to unlock" and all keys on the calculator on both orientation works fine. I can use the keyboard on horizontal orientation.

    Bottom row of the keyboard is not working in a vertical orientation on the iPhone 3Gs. the "slide to unlock" and all keys on the calculator on both orientation works fine. I can use the keyboard on horizontal orientation. The tabs on bottom of all apps also work fine.
    I have already tried holding down the power button and home button for 10 seconds, but no difference.

    I've had this problem on and off for the last few weeks (around, but not directly related, to upgrade to 6.1...can't remember if was before or after)....I'm very convinced it's a software problem (as there have been times when the bottom row works perfectly, without any need to "press" differently or anything).
    However, it seems to be a rather resilient software issue, as a full restore does not consistently fix it, and it applies to more than just the keyboard; if I open a drawing app, there's definitely a row (about 4mm up from the edge of the screen closest to home button) where I cannot draw.
    It's happened 4 times now.  Originally it went away with a restore from backup, then worked for 2 more days.  The second and third times, it went away with a full restore (although I did two full restores in between those two restores that did nothing, so restore didn't consistently fix it)....and it seemed to return in the most random of circumstances. 
    I paid very close attention to what apps I was using the last time it was working so that I could spot which app, if any, might be causing the issue.  I deleted several apps, I stopped using the games and many other apps.   I only used three apps between it working fine and starting up as a problem again: mail, safari and messages.
    I was convinced it was mail, as it happened this morning when I picked up my phone off the bedside table to respond to a new email.  It was working when I went to bed.  I picked up the phone when it buzzed, hit the email app, hit reply and started to type....**** bottom row wasn't working again.
    However, tonight I did 2 things....one of them worked because it went back to normal (sorry, I don't know which as I was exasperated and trying a number of things). 
    The two things I did between a broken keyboard and a working keyboard were:
    1) adding a second keyboard (English(Canada)), changing to this keyboard, and changing back
    2) disabling Siri...and then turning it back on...and then disabling Siri's "Raise to Speak"
    In retrospect, I wonder if it actually was the "Raise to Speak" that was putting the phone into a weird state, and might explain why the phone would just "suddenly" start behaving strangely when I picked it up.  Of note, the "raise to speak" hasn't actually triggered Siri to come on in months anyway.
    Regardless, the keyboard is back to normal now...and I'm just going to leave "Raise to Speak" off.  I've put the keyboard back to just "English" with no alternates and Siri remains on otherwise without issue.

  • Question why does 1 row(s) inserted display even though nothing was inserte

    My question is when I run the below code in the sql workshop/sql command even though the insert statement is commented out. I still get the following message:
    1 row(s) inserted.
    Why? I check the table and I can seel that nothing was inserted. So why do I get the message 1 row(s) inserted.
    I will be running this on an apex form. Should I worry about this?
    Howard
    declare
         getFm411ID number;
    distCount number;
    begin
    select count(*) into distCount from test where no = :P_NO and active = 'A';
    if distCount > 0 then
    -- insert into tbl_test(fm411_id,dist_id) values (getFm411ID,my411dist.dist_id);
    dbms_output.put_line('test');
    end if;
    end;

    It is a dummy message, and no need to worry about it.
    begin
      null;
      -- insert into no_such_table (x) values ('a');
    end;The above dummy code produces "1 row(s) inserted" message.
    Ravi

  • Row Lock On Form9i,but not occur on Form6i

    I've develope form on oracle 6i to Processing data/recall the data,was processed,back. I try process data(insert data to table A,update the process date to table B and commit on form) and recall it back (delete data from A,update process date to table B and commit),it work fine.But when i compile to 9i,and try the same action (process and recall),I encounter the row locking.
    Can anyone help me?
    DBA_DML_LOCKS:
    SESSION_ID     OWNER     NAME     MODE_HELD     MODE_REQUESTED     LAST_CONVERT     BLOCKING_OTHERS
    276     TEST     A     Row-X (SX)     None     5330     Not Blocking
    276     TEST     B     Row-X (SX)     None     5330     Not Blocking
    v$locked_object :
    XIDUSN     XIDSLOT     XIDSQN     OBJECT_ID     SESSION_ID     ORACLE_USERNAME     OS_USER_NAME     PROCESS     LOCKED_MODE
    5     37     81166     43461     276     TEST     SYSTEM     5132:2292     3
    5     37     81166     43291     276     TEST     SYSTEM     5132:2292     3

    Hi Jon,
    >>Is there a way through group policy (or anything else) to delete all icons on the desktop, except what you specifically program it to do via user-based GPobjects?  
    Based on the description, we can choose to use mandatory user profile to do this. With mandatory user profiles, a user can modify his or her desktop, but the changes are not saved when the user logs off. The next time the user logs on, the mandatory user
    profile created by the administrator is downloaded.
    Regarding mandatory user profile, the following articles can be referred to for more information.
    Mandatory User Profiles
    https://msdn.microsoft.com/en-us/library/windows/desktop/bb776895(v=vs.85).aspx
    Creating a Mandatory User Profile
    https://technet.microsoft.com/en-us/library/gg241183(v=ws.10).aspx
    Create a mandatory user profile
    https://technet.microsoft.com/en-in/library/cc786301(v=ws.10).aspx
    Best regards,
    Frank Shen
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • JBO-25019: Entity row of key null not found even though key filled in??

    Hi All,
    I'm using jdev 10.1.2, adf bc's and jsp's.
    I have a view object derived from 2 entity objects, which the user is allowed edit. It's a standard adf edit. Even though the key fields are filled in i keep getting this error when the page is submitted... "JBO-25019: Entity row of key null not found in Milk. " where milk is one of the entities
    I've checked that the fields are bound, which they are. I created a test method in the app module where i got the current row (i.e. the row i'm editing) and got the key values no problem. I've created the page again, same problem.
    This problem occurs in another edit page which uses the same view object. I've other edit pages which use different view objects, but who are based on the same entities and there is no problem.
    i cannot understand why. I have tried creating the view object again and creating a new edit page but i still get the same error.
    I can't understand why this is happening. If anyone could help, i'd be really grateful.
    Thanks in advance,
    newbe.

    I take your point about not all databases support triggers.
    However I am not using DBSequence...the above is a bug surely.For non-oracle SQLBuilders, if RETURNING clause is not supported by the DB in insert/update DML, then to perform refresh-on-insert/update BC4J calls the corresponding entity's doRefreshSQL() method. The javadoc says:
    if refresh-on-insert or update setting is set on an attribute which
    is a primary key attribute, then this method will fail to fetch the entity as the primary key
    in the databse for the equivalent row would have potentially changed. If that's true,
    then subclasses need to implement this method and perform "custom" sql to fetch the refresh-attrs
    based on some unique criteria for this entity.

  • Problems with a table in PDF`S footer

    Dear sirs,
    We are having problems when trying to run a PDF with Adobe LiveCycle Designer tool.
    We are working with a PDF which is composed of a header, the main body and a footer. We have created a table (table1) at the footer and
    another one at the main body (table2). This last table (table2) may overflow therefore it will genarate two pages for our PDF.
    On both pages appear the header and the footer correctly but in the last page it does not write the data from the table included in the footer (table1).
    We have no problems with the table included in the main body
    In the attachments, I send you the screenshots of both pages in which I have marked in red the part where we have error.
    May you help us to solve our problem?
    Thanks in advance your help.
    Edited by: emgaitan on Mar 16, 2010 2:18 PM

    Wardell,
    Check the data in RSA3 for the extractor that you use to bring data .
    You must be using the data source 0CO_OM_CCA_09. Check the data and reconcile and you will get it.
    Let me know if you need anything else.
    Thanks
    Ravi Thothadri
    [email protected]

  • Is it possible to use a table in the sheet footer in Numbers '09?

    Hello there.
    I can't find a way to to that. In Pages '09 it is indeed possible and very simplie and intuitive. The very same approach doesn't work for me in Number. Is it possible at all?
    Thanks in advance.

    You can not place a table in the header/footer in Numbers

  • Row based Target only mode not supported

    when i try to execute a mapping i am getting the following error
    Row based Target only mode not supported
    what can be the reasons for this

    Hello Michael
    Check if you have a procedure (other than pre or post mapping) in your mapping. Every part of a mapping after a procedure can only be generated in row-based mode.
    Hope this helps
    Mate

  • The lower row of my iphone does not respond to tapping. i.e. texting; the space bar, return

    The lower row of my iphone does not respond to tapping. i.e. texting; the space bar, return and number tabs and for phone; emergency, 0, and delete tabs.
    I've updated my phone, turned it off and on, charged it. Nothing. Help!

    Sounds like a hardware problem.  When you updated, that would have wiped the device and installed the latest iOS, thus pretty much eliminating a software issue.  You could try to restore as new, i.e. without your backup and see if it works factory fresh.  If still a problem, it's most likely a hardware issue.

  • Layout Pattern: Table with Header Left, Footer Right with JSFF?

    Details are in another forum, but was unsure if it was the correct forum to post to.
    You can find the post here:
    Layout Pattern: Table with Header Left, Footer Right with JSFF?

    The moral of the story is to set your <af:showDetailItem>'s stretchChildren attribute to "first".
                  <af:showDetailItem id="sdi5" text="Architecture"
                                     stretchChildren="first">The End.

Maybe you are looking for