Row_number() -SQL function throws error - SAP B1 2005 B - PL 36

hi experts,
when i try 2 run "SELECT * FROM (SELECT ROW_NUMBER() OVER (ORDER BY CardName) AS RowNo,CardCode,CardName FROM OCRD Where CARDTYPE='C') AS OCRD"
query in SAP B1 2005 B, PL-36 it shows an error -server throw an exception.
anybody can comment on it
thanks in advance
jithesh nambiar

Hi,
Problem might be with your query. Server exception error may occur while accessing large number data retrieving from the data base. It is execution type of error. What do you expect/want from your sql query?
try this query
SELECT ROW_NUMBER() OVER (ORDER BY CardName) AS RowNo,CardCode,CardName FROM OCRD Where CARDTYPE='C'
Senthil Maruthappan.

Similar Messages

Sql function sequence error

i have a programm ... every time i try to add somthing to it ; wiil bring an error message telling me that there is an (sql function sequence error) ....
for example i have somthing like
if(i<beginYear){
principal[i] = amount/installment;//somthing like that
//other statments
here i tried to change it like
if(i<beginYear + 1)
and the error came .....
have you any idea..!!!

actually iam using a microsoft access table but what is sstrange is that the error comes after the data base has been closed , so i didnt see any connection between the sql and what is going on..... i wander what usually ment by sql funftion sequence error...

Count() function throws error in EQL query for metric

Hi
I am trying to use count function in EQL query for Metric Bar to show the number of occurrences of a record.
When the record type doesn't exist i expect the function to return count as 0. Instead the function throws a runtime exception and the whole Metric Bar portlet fails, with error No Results Available. Even though other components in the metric bar have valid results.
2013-02-21 13:03:51,216 WARN [MetricsBarQueryProcessor] The EQL query does not return any results.
2013-02-21 13:03:51,216 ERROR [MetricsBarQueryProcessor] The EQL query does not return any results.
2013-02-21 13:03:51,216 WARN [MetricsBarResultsProcessor] No statement results to process.
The EQL query i am using is
RETURN NUMBER_OCCURS AS SELECT COUNT(EMP_ID) AS NUMBER_OCCURS where EMP_NAME IS NOT NULL group;
I tried using COALESCE but that doesn't help.
Can some one please suggest a workaround to this?

Srikanth,
Two statements are used here because the original question was pertaining to the null set (where there are employees in the nav state but no employees that fit the special analytics criteria in the navigation state). The question/answer has nothing to do with what is in the COUNT parentheses clause as Counting a null set will always give you NULL, not 0, no matter what you put in there.
What we're really doing, in the second part of the query, is writing a query over a set of data that is not the null set (i.e. the current navigation state). This allows the 0 value to come through in the case where the first analytics statement is evaluated over a null set of records. If there were truly no records in the navigation state, this too would return a null set and not zero.
Hope that makes sense, feel free to respond (either on here or offline) if it's unclear.
Regards,
Patrick Rafferty
http://branchbird.com

PL/SQL Function call error while reading or assigning returned value

Hi,
I am getting the following error while tryih to read the value of the PL/SQL Function. I am calling a function in one of my PL/SQL Packages passing mutliple IN parametes and the function returns some value back. Now on BPEL side when I try to read the return value I am getting an error:
*<summary>*
empty variable/expression result.
xpath variable/expression expression "/ns3:OutputParameters/ns3:TEST_FUNCTION" is empty at line 124, when attempting reading/copying it.
Please make sure the variable/expression result "/ns3:OutputParameters/ns3:TEST_FUNCTION" is not empty.
*</summary>*
Even though in the console when I check the Invoke Output Parameter it does shows me a valid value being retuned by a Function but when I am trying to Assgn this value to some variable using Assign Activity I get the above error.
Even though all goes fine but looks like I am not able to read or assign the value returned from the Function.
So just wondering if this even works as to me I have a very simple example and that seems not to work. Function is called successfully and is returning the value as I can see it in the BPEL console but when tryin to read or assign that value to some other variable I get the above error.
Any ideas?
Thanks

This issue has come up a lot. The problem is with a mismatch between the version of JDeveloper and SOA. You'll encounter namespace issues if you use 10.1.3.1 in combination with 10.1.3.3 (or 10.1.3.4). You MUST synchronize both JDev and SOA to 10.1.3.3 or 10.1.3.4 (mixing 10.1.3.3 and 10.1.3.4 is OK). We changed when going to 10.1.3.3 by adding elementFormDefault="qualified" to the generated XSD. We used the default "unqualified" in 10.1.3.1. So you'll encounter namespace issues unless you're using 10.1.3.3 or higher JDev AND SOA. The fact that I see <*db:*...> tells me that you're using 10.1.3.1 JDeveloper. The correct solution is to upgrade your components.

Hi all problem with sql server 2008 in sap b1 2005 PL38,42

Hello Sir,
We are also facing this problem. Our client has purchased SQL 2008 & we have installed SAP B1 PL 05 & also we have to upgrade it to PL 26 atleast for installing TDS Add on 4.8 so that Project runs smoothly.
Can u specify the status? i.e. at what stage is that upgradation? or by how much time this problem will be solved? Bcoz we are on the stage of test go live & we cant take back up of database of SQL 2008 & restore it in SQL 2005. We will have to do all settings in new company with database in SQL 2005.
Pls reply at the earliest.

Hi Nilesh,
I wonder how you got B1 installed properly on MSSQL 2008, as MSSQl 2008 comes with a new Native Client connection.
Anyway I see two options:
(1) Keep the system as it is, meaning no upgrades of B1 and pray nothing will happen as long MSSQL Server 2008 is not supported.
(2) In order to get a supported environment the better option would be, to try a combination of CopyExpress and DTW and get all data and settings transfered into a new MSSQL 2005 based Database.
Kind regards
Mario Schoenberg
Senior Support Consultant
SAP Business One Forums Team

DECODE SQL Function - Parsing error in Defining Objects in Universe Designe

Hi,
I have created a class and an object in BO XI R3 Universe designer.
I am getting the parsing error while defining the object when using the custom SQL as
select decode(matteraction,null,decode(matterissue,null,'MATTER','ISSUE'),decode(matterissue,null,'TYPE IS ACTION',' ACTIONu2019)) as TYPE from wh_cf_cmsu
The object Type is "character", i have tried with Long Text, Number, Date as well and the same sql works fine by returning String values through TOAD.
Do we have any constrains in using DECODE in BO XI R3 or any other syntax please....
Please guide me in resolving this issue.
Thanks,
Karthik.

Hi,
1.At back end check the data type for matteraction column and define it accordingly in object definition.
2. Try to break your select clause definition into smaller parts and check it where the exact issue is as below
i.select decode(matterissue,null,'TYPE IS ACTION',' ACTIONu2019) ............
ii.select decode(matteraction,null,decode(matterissue,null,'MATTER','ISSUE') ..........
iii.select decode(matteraction,null,decode(matterissue,null,'MATTER','ISSUE'),decode(matterissue,null,'TYPE IS ACTION',' ACTIONu2019)) as TYPE from wh_cf_cmsu

MovieClip(parent).function throws error TypeError: Error #1034:

The error says there is a forced conversion of a loader to a movieclip.
I am using a container movie main.swf to load a child movie. The child movie tries to access a variable and a function in main.swf
child.swf contains:
import flash.display.Loader;
import flash.display.MovieClip;
import flash.events.Event;
MovieClip(parent).traceF;
MovieClip(parent).globalVar;
The loader Main movie is movie.swf which has its code in a Main.as doc
package
import flash.display.Loader;
import flash.display.MovieClip;
import flash.net.URLRequest;
import flash.events.ProgressEvent;
import flash.events.Event;
public class Main extends MovieClip
public var globalVar:String = "global";
public var myLoader:Loader = new Loader ();
public function Main()
this.addEventListener(Event.ADDED_TO_STAGE,init);
private function init(e:Event):void
loadFile("child.swf");
private function loadFile(path:String):void
var myRequest:URLRequest = new URLRequest(path);
myLoader.load(myRequest);
myLoader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, loadProgress);
myLoader.contentLoaderInfo.addEventListener(Event.COMPLETE, loadComplete);
private function loadProgress(evt:ProgressEvent):void
var amountLoaded:Number = (evt.bytesLoaded / evt.bytesTotal)*100;
trace("Loading: % " + amountLoaded);
private function loadComplete(evt:Event):void
trace("Complete - " + evt.target.content);
addChild(myLoader);
public function traceF ()
trace(globalVar);

If you are loading the swf into another swf using the Loader class, the Loader is the parent of the loaded file. The parent of the Loader is the main swf you are probably after... MovieClip(parent.parent) from the loaded file's perspective.

PL/SQL-Function for validation

I wrote a PL/SQL function in order to validate that the SUM of input-values doesn't exceed 100.
I used validation rule from APEX for PL/SQL-expression (same like SQL-expression):
f_page_16_validation(:P16_PSP_PSP)<=100 (Condition: CREATE, SAVE)
source code for function:
CREATE OR REPLACE FUNCTION f_page_16_validation
(pi_p16_psp_psp VARCHAR2)
RETURN NUMBER
IS
vl_sum NUMBER(5) := 0;
BEGIN
SELECT NVL(SUM(psp_anteil_projekt),0) INTO vl_sum
FROM st_psp_projekt_psp
WHERE UPPER(psp_psp) = pi_p16_psp_psp;
RETURN vl_sum;
END f_page_16_validation;
When I check in SQL*Plus against database: SELECT f_page_16_validation('A_TEST_UHL_PSP%') FROM dual;
I get the correct value. When I input into APEX-Application the validation rule doesn't fire (CREATE). If my SUM is over 100 and try to change
one value (in order to come under 100) (SAVE) - the validation rule fires but quite independent of the SUM - it accepts NO VALUE!!
Apex-Version: 3.1.1.00.09
Can somebody tell me what's wrong? Is there any other way - SQL,PL/SQL-expression, PL/SQL-function body (bool, error text) didn't work.

1. If your PL/SQL expression is written as you stated:
f_page_16_validation(:P16_PSP_PSP)<=100then you will receive an error message if the total is <= 100 and not if it exceeds 100.
2. Where in your code do you consider the input values? I see that you are selecting from a table, where your already inserted values are but I see no input values. Are you using a form or a tabular form? If I look at the names of your buttons then I wouls say you are using a form.
3. You are talking about condition. What type of condition you use? I would use a PL/SQL Expression like this:
:REQUEST IN ('CREATE', 'SAVE')4. I would suggest to use a validation of type PL/SQL Function Returning Error Text since you can put all the code in one.
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

SQL developer 3.1 throws Function sequence error

Hi,
I was able to connect to my remote timesten db and was able to compile and execute packages.
I tried modifying one of my packages to include dbms_lock.sleep in my code and then compiled the package.
while running the package i got some error related to locking.
The strange this is after this i am not able to connect to the timesten db using sql developer.
An error is thrown, "Could not connect to the database Function sequence error"
I tried restarting the timesten server and then also the same error exists.
How can i resolve this?
regards
Lal

Hi,
This looks like a problem with the SQL*Developer Early Adopter release itself so it would be better if you opened a new thread in the SQL*Developer forum -
SQL Developer
That is monitored by the developers more than this thread so they are more likely to see it.
Regards,
Mikei

SAP ERP 2005 SR 2 IDES installation error in step "Run ABAP Reports"

Hello,
I'm installing SAP ERP 2005 SR 2 IDES on Win2003 R2 SP2 and Oracle 10.2 to create a test-system for my diploma thesis.
During the step "Import ABAP" I got the following message:
object_checker.log
ERROR: 2008-05-21 20:50:38
1 objects have error/ignore/execute or unknown status in the task lines.
Invalid objects are saved in 'invalid_objects.txt' file.
invalid_objects.txt
package object type action status
SAPDFACT ?N pkey create
but the installation went on until "Run ABAP Reports".
Warnings and Errors in sapinst.log are:
WARNING 2008-05-27 15:09:36
Execution of the command "C:\usr\sap\IMP\SYS\exe\uc\NTI386\stopsap.exe name=IMP nr=00 SAPDIAHOST=imperia-sap" finished with return code -1. Output:
STOPSAP: execution of C:\usr\sap\IMP\SYS\exe\uc\NTI386\sapntwaitforhalt.exe name=IMP nr=00 SAPDIAHOST=imperia-sap 3600 failed
Details are written to C:\Programme\sapinst_instdir\ERP\SYSTEM\ORA\CENTRAL\AS\stopsap.log
WARNING 2008-05-27 15:09:36
Could not stop instance 'DVEBMGS00' of SAP system IMP.
WARNING 2008-05-27 15:09:38
Connect to message server (imperia-sap/3900) failed: NIECONN_REFUSED.
WARNING[E] 2008-05-27 15:12:05
FSL-06002 Error 1060 (Der angegebene Dienst ist kein installierter Dienst.) in execution of a 'OpenService' function, line (266), with parameter (sapccmsr.00).
WARNING[E] 2008-05-27 15:21:42
FRF-00007 Unable to open RFC connection.
ERROR 2008-05-27 16:30:15
FRF-00025 Unable to call function. Error message: connection closed without message (CM_NO_DATA_RECEIVED) .
INFO 2008-05-27 16:30:19
RFC connection closed.
ERROR 2008-05-27 16:30:45
MUT-03025 Caught ERfcExcept in Modulecall: connection closed without message (CM_NO_DATA_RECEIVED).
ERROR 2008-05-27 16:30:47
FCO-00011 The step runRADDBDIF with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_ABAP_Reports|ind|ind|ind|ind|2|0|runRADDBDIF was executed with status ERROR .
Full log of today is available at [http://pastebin.com/f43531f97]
Has anyone an idea how I can finish this installation?
Thx
Daniele

It seems that the system did not come up and thus the RFC call fails.
What´s the output of
dev_w0
dev_disp
(in the ...work directory)?
Markus

Invoking a PL/SQL function from BPEL throws fault.

Hi, I'm trying to invoke a PL/SQL function that inserts data in to a table from a BPEL via DB Adapter. The process, when I test it, throws a runtime fault as follows:
*Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'EmpRegister' failed due to: JCA Binding Component connection issue. JCA Binding Component is unable to create an outbound JCA (CCI) connection. AddEmployee:EmpRegister [ EmpRegister_ptt::EmpRegister(InputParameters,OutputParameters) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: BINDING.JCA-12510 JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/DBConn_215'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/DBConn_215. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.*
Also, the fault description was a s follows:
*JCA Resource Adapter location error. Unable to locate the JCA Resource Adapter via .jca binding file element <connection-factory/> The JCA Binding Component is unable to startup the Resource Adapter specified in the <connection-factory/> element: location='eis/DB/DBConn_215'. The reason for this is most likely that either 1) the Resource Adapters RAR file has not been deployed successfully to the WebLogic Application server or 2) the '<jndi-name>' element in weblogic-ra.xml has not been set to eis/DB/DBConn_215. In the last case you will have to add a new WebLogic JCA connection factory (deploy a RAR). Please correct this and then restart the Application Server.*
I know, it looks like a JCA adapter error, but when I do a DB to DB table synchronization with this connection factory, no problems happen. Is ther any special procedure I should follow in mapping input data to db schema?

HI,
I am working on BPEL process and human workflow...
I created a process and a Data control and now can see it as JCA Adapter in console..in this adapter I am executing a sql procedure.. we can execute in in BPEL process through invoke activity, now my requirement is how to invoke this data control through custom java code. please help...\
now i have two wsdl files.
RegistrationUpload.wsdl(process name)
<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions name="RegistrationUpload"
targetNamespace="http://xmlns.oracle.com/RegistrationUpload_jws/RegistrationUpload/RegistrationUpload"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:client="http://xmlns.oracle.com/RegistrationUpload_jws/RegistrationUpload/RegistrationUpload"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/">
     
     <wsdl:types>
          <schema xmlns="http://www.w3.org/2001/XMLSchema">
               <import namespace="http://xmlns.oracle.com/RegistrationUpload_jws/RegistrationUpload/RegistrationUpload" schemaLocation="xsd/RegistrationUpload.xsd" />
          </schema>
     </wsdl:types>
     
     <wsdl:message name="RegistrationUploadRequestMessage">
          <wsdl:part name="payload" element="client:process"/>
     </wsdl:message>
     <wsdl:message name="RegistrationUploadResponseMessage">
          <wsdl:part name="payload" element="client:processResponse"/>
     </wsdl:message>
     
     
     <wsdl:portType name="RegistrationUpload">
          <wsdl:operation name="process">
               <wsdl:input message="client:RegistrationUploadRequestMessage"/>
          </wsdl:operation>
     </wsdl:portType>
     
     <wsdl:portType name="RegistrationUploadCallback">
          <wsdl:operation name="processResponse">
               <wsdl:input message="client:RegistrationUploadResponseMessage"/>
          </wsdl:operation>
     </wsdl:portType>
     
     <plnk:partnerLinkType name="RegistrationUpload">
          <plnk:role name="RegistrationUploadProvider">
               <plnk:portType name="client:RegistrationUpload"/>
          </plnk:role>
          <plnk:role name="RegistrationUploadRequester">
               <plnk:portType name="client:RegistrationUploadCallback"/>
          </plnk:role>
     </plnk:partnerLinkType>
</wsdl:definitions>
uploadDataToPermananentDB.wsdl
<?binding.jca uploadDataToPermananentDB_db.jca?>
<wsdl:definitions name="uploadDataToPermananentDB"
targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/RegistrationUpload/RegistrationUpload/uploadDataToPermananentDB"
xmlns:db="http://xmlns.oracle.com/pcbpel/adapter/db/DAMSMGR/TEMP_TO_PERMANENTDB/"
xmlns:tns="http://xmlns.oracle.com/pcbpel/adapter/db/RegistrationUpload/RegistrationUpload/uploadDataToPermananentDB"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:plt="http://schemas.xmlsoap.org/ws/2003/05/partner-link/">
<plt:partnerLinkType name="uploadDataToPermananentDB_plt">
<plt:role name="uploadDataToPermananentDB_role">
<plt:portType name="tns:uploadDataToPermananentDB_ptt"/>
</plt:role>
</plt:partnerLinkType>
<wsdl:types>
<schema xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="http://xmlns.oracle.com/pcbpel/adapter/db/DAMSMGR/TEMP_TO_PERMANENTDB/"
schemaLocation="xsd/DAMSMGR_TEMP_TO_PERMANENTDB.xsd"/>
</schema>
</wsdl:types>
<wsdl:message name="args_in_msg">
<wsdl:part name="InputParameters" element="db:InputParameters"/>
</wsdl:message>
<wsdl:portType name="uploadDataToPermananentDB_ptt">
<wsdl:operation name="uploadDataToPermananentDB">
<wsdl:input message="tns:args_in_msg"/>
</wsdl:operation>
</wsdl:portType>
</wsdl:definitions>
please help me how to call the data adaper from my java code..
hope i will get some hint in this forum...
Edited by: user13370040 on Mar 22, 2011 5:55 AM

What (the hell) is SQL Exception called Function sequence error?

...doing in a code like this:
ResultSet friends=...executeQuery...
while (friends.next())
log.append(friends.getString("sendergsm"));
somewhere in between that loop, or sometimes the loop runs out fine, and sometimes it throws SQLException called General Error. Not guite normal...

Thank you for replying... that must be agains some of the policies of the sun, to make methods that may be called normally, but may cause an error.
Anyway, this is my first database application. The number of problems I've had in few days is unbelivable. I wonder does it load the drivers from disk or something everytime it reads one record from database. I mean when I did the above query, the table had about 10 entries (the program showed 5 to 10 before function sequense error) and displaying each record to TextArea took over second. (In paradox (The dosversion) this would have taken less than a second).
And paradox tables doesn't work at all because it raises exception: Table isn't expected format. If I set paradox 4.0 drivers and put paradox 4.0 tables, you would guess that the format would be expected. And you cannot create paradox tables with SQL. Now I need to use access databases. How can database containing 60 records be 500kb:s? When it will contain 50000 new records every day, i guess I'll be in problem. Each tranaction (say 5 simple queries) taking minutes... heelp meee!!

Error PLS-00306 during calling PL/SQL function from Java

Hi all,
I am facing a problem during call of oracle PL/SQL function from java using CallableStatement.
I receive following error message.
java.sql.SQLException: ORA-06550: line 1, column 13:
PLS-00306: wrong number or types of arguments in call to 'EXPORT_HIST_ALARMS_FUNC'
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
As per above error EXPORT_HIST_ALARMS_FUNC in oracle has this signature.
CREATE OR REPLACE FUNCTION EXPORT_HIST_ALARMS_FUNC(startDateTime VARCHAR2, endDateTime VARCHAR2, meType VARCHAR2) RETURN VARCHAR2 IS
END EXPORT_HIST_ALARMS_FUNC;
Above function I have called following way in java.
String sql = "begin ?:= EXPORT_HIST_ALARMS_FUNC(?, ?, ?); end;" ;
CallableStatement cStatement = null;
cStatement = connection.prepareCall(sql);
cStatement.registerOutParameter(1,Types.VARCHAR);
cStatement.setString(2,startDateTime);
cStatement.setString(3,endDateTime);
cStatement.setString(4,meType);
cStatement.execute();
msg = cStatement.getString(1);
Actually above function requires three input parameters and one return parameter.
During execution of above java code it throws SQLException and shows PLS-00306: wrong number or types of arguments in call to 'EXPORT_HIST_ALARMS_FUNC' error.
I have run this function directly from oracle with three parameters and run successfully and finally it returns string.
But I am unable to figure out why it doesn't run from above java code.
Please help regarding this.
Thanks.
Regards,
Shardul Banker

Try this:
String sql = "begin ?:= EXPORT_HIST_ALARMS_FUNC(?, ?, ?); end;" ;
CallableStatement cStatement = null;
cStatement = connection.prepareCall(sql);
cStatement.registerOutParameter(1,Types.VARCHAR);
cStatement.setString(1,startDateTime);
cStatement.setString(2,endDateTime);
cStatement.setString(3,meType);
cStatement.execute();
msg = cStatement.getString(1);Regards,
Martijn Teigeler
Edited by: mTeigeler on Oct 13, 2007 10:22 AM

Error on calling PL/SQL function

Hi All,
I have a code to call an existing PL/SQL function as following:
PL/SQL function:
FUNCTION pub_pkg.get_acc_rule_id (
i_pub_id IN NUMBER,
i_issue_id IN NUMBER,
i_item_type IN VARCHAR,
i_start_date IN DATE,
i_end_date IN DATE
RETURN NUMBER;
Java Code:
public Number getAccountingRuleId(Number pubId, Number issueId, String itemType,
Date startDate, Date endDate)
Number ruleId = new Number(-1);
String sqlstatement =
"BEGIN " + "\n"
+" :1 := pub_pkg.get_acc_rule_id " + "\n"
+" (p_param1 => :2" + "\n"
+" ,p_param2 => :3" + "\n"
+" ,p_param3 => :4" + "\n"
+" ,p_param4 => :5" + "\n"
+" ,p_param5 => :6" + "\n"
+" );" + "\n"
+"END; " + "\n";
OADBTransaction trans = this.getOADBTransaction();
OracleCallableStatement cStmt =
(OracleCallableStatement) trans.createCallableStatement(sqlstatement,1);
try
cStmt.setNUMBER(2,pubId);
cStmt.setNUMBER(3,issueId);
cStmt.setString(4,itemType);
cStmt.setDATE(5,startDate);
cStmt.setDATE(6,endDate);
cStmt.registerOutParameter(1, Types.INTEGER, 0, 10);
cStmt.execute();
ruleId = new Number(cStmt.getNUMBER(1));
cStmt.close();
catch (Exception ex)
throw OAException.wrapperException(ex);
finally
try
cStmt.close();;
catch(Exception e)
throw OAException.wrapperException(e);
return ruleId;
But I got error as following:
java.sql.SQLException: ORA-06550: line 2, column 8:
PLS-00306: wrong number or types of arguments in call to 'GET_ACC_RULE_ID'
ORA-06550: line 2, column 2:
PL/SQL: Statement ignored
Can anyone help me to point out where is wrong with my code?
Thanks & Regards,
KJ

That's a nice summary of this thread discussion, KJ. I hope other guys also start doing the same when their issue gets fixed.
To add to above summary, if you want to call a procedure instead of a function, then you need to modify the line
String sql = "begin :1 := package.function(:2,:3,:4); end;";
to
String sql = "begin package.procedure(:1,:2,:3); end;";
In and out parameters can be as per the actual procedure.
--Shiv

PL/SQL function body returning SQL - report error:ORA-01403: no data found

Hi,
I am working on Application Express 4.0.2.00.06, and 11G database.
I have a problem with classic report area of type - PL/SQL function body returning SQL query. Query works if I define region area as - Use Generic Column Names (parse query at runtime only), and does not when I define it - Use Query-Specific Column Names and Validate Query.
I am getting error:
report error:ORA-01403: no data found
This is my query that is returned from function, and displayed with htp.p, and it works ok and returns data in SQL Developer and SQL Workshop (in Apex).
<code>
/* select 1 from dual */ SELECT SIFPRO, NAZIV, VODITELJ, DATPZA,SUM(DECODE(TJEDAN,'2010/46',BRDJEL,null)) as "2010/46" ,SUM(DECODE(TJEDAN,'2010/49',BRDJEL,null)) as "2010/49" ,SUM(DECODE(TJEDAN,'2010/50',BRDJEL,null)) as "2010/50" ,SUM(DECODE(TJEDAN,'2010/51',BRDJEL,null)) as "2010/51" ,SUM(DECODE(TJEDAN,'2010/52',BRDJEL,null)) as "2010/52" ,SUM(DECODE(TJEDAN,'2011/01',BRDJEL,null)) as "2011/01" ,SUM(DECODE(TJEDAN,'2011/02',BRDJEL,null)) as "2011/02" ,SUM(DECODE(TJEDAN,'2011/03',BRDJEL,null)) as "2011/03" ,SUM(DECODE(TJEDAN,'2011/04',BRDJEL,null)) as "2011/04" ,SUM(DECODE(TJEDAN,'2011/05',BRDJEL,null)) as "2011/05" ,SUM(DECODE(TJEDAN,'2011/06',BRDJEL,null)) as "2011/06" ,SUM(DECODE(TJEDAN,'2011/07',BRDJEL,null)) as "2011/07" ,SUM(DECODE(TJEDAN,'2011/08',BRDJEL,null)) as "2011/08" ,SUM(DECODE(TJEDAN,'2011/09',BRDJEL,null)) as "2011/09" ,SUM(DECODE(TJEDAN,'2011/10',BRDJEL,null)) as "2011/10" FROM (SELECT * FROM PMV_PLAN_TVRTKA) GROUP BY SIFPRO, NAZIV, VODITELJ, DATPZA ORDER BY SIFPRO, NAZIV, VODITELJ, DATPZA
</code>
As you can see, I even tried with workaround that I found on the previous post on the forum, and that is to put /* select 1 from dual */ to start query.
Any help would be appriciated.

/* select 1 from dual */ SELECT SIFPRO, NAZIV, VODITELJ, DATPZA,SUM(DECODE(TJEDAN,'2010/46',BRDJEL,null)) as "2010/46" ,SUM(DECODE(TJEDAN,'2010/49',BRDJEL,null)) as "2010/49" ,SUM(DECODE(TJEDAN,'2010/50',BRDJEL,null)) as "2010/50" ,SUM(DECODE(TJEDAN,'2010/51',BRDJEL,null)) as "2010/51" ,SUM(DECODE(TJEDAN,'2010/52',BRDJEL,null)) as "2010/52" ,SUM(DECODE(TJEDAN,'2011/01',BRDJEL,null)) as "2011/01" ,SUM(DECODE(TJEDAN,'2011/02',BRDJEL,null)) as "2011/02" ,SUM(DECODE(TJEDAN,'2011/03',BRDJEL,null)) as "2011/03" ,SUM(DECODE(TJEDAN,'2011/04',BRDJEL,null)) as "2011/04" ,SUM(DECODE(TJEDAN,'2011/05',BRDJEL,null)) as "2011/05" ,SUM(DECODE(TJEDAN,'2011/06',BRDJEL,null)) as "2011/06" ,SUM(DECODE(TJEDAN,'2011/07',BRDJEL,null)) as "2011/07" ,SUM(DECODE(TJEDAN,'2011/08',BRDJEL,null)) as "2011/08" ,SUM(DECODE(TJEDAN,'2011/09',BRDJEL,null)) as "2011/09" ,SUM(DECODE(TJEDAN,'2011/10',BRDJEL,null)) as "2011/10" FROM (SELECT * FROM PMV_PLAN_TVRTKA) GROUP BY SIFPRO, NAZIV, VODITELJ, DATPZA ORDER BY SIFPRO, NAZIV, VODITELJ, DATPZA

Row_number() -SQL function throws error - SAP B1 2005 B - PL 36

Similar Messages

Maybe you are looking for