Rows to Columns in One Line

I have these 3 tables
TABLE1
ID DRUG1
1     10     
2     20     
3     40     
4     50     
TABLE2
ID DRUG2
1     20     
3     30     
4     40     
5     50     
TABLE3
ID DRUG3
1     30     
2     30     
3     50     
6     60     
My Output Table should be:
ID Drug1 Drug2 Drug3
1 10 20 30
2 20 NULL 30
3 40 30 50
4 50 40 NULL
5 NULL 50 NULL
6 NULL NULL 60
Can someone please help me constructing this SQL.
Regards
Murali

WITH TABLE1 AS
    SELECT 1 AS id, 10 AS drug1 FROM dual UNION ALL
    SELECT 2, 20 FROM dual UNION ALL
    SELECT 3, 40 FROM dual UNION ALL
    SELECT 4, 50 FROM dual
TABLE2 AS
    SELECT 1 AS id, 20 AS drug2 FROM dual UNION ALL
    SELECT 3, 30 FROM dual UNION ALL
    SELECT 4, 40 FROM dual UNION ALL
    SELECT 5, 50 FROM dual
TABLE3 AS
    SELECT 1 AS id, 30 AS drug3 FROM dual UNION ALL
    SELECT 2, 30 FROM dual UNION ALL
    SELECT 3, 50 FROM dual UNION ALL
    SELECT 6, 60  FROM dual
-- END OF TEST DATA
SELECT nvl(nvl(t1.id, t2.id), t3.id) AS id, t1.drug1, t2.drug2, t3.drug3
FROM   table1 t1
FULL OUTER JOIN table2 t2 ON t2.id = t1.id
FULL OUTER JOIN table3 t3 ON t3.id = t1.id
ID                     DRUG1                  DRUG2                  DRUG3                 
1                      10                     20                     30                    
2                      20                                            30                    
3                      40                     30                     50                    
5                                             50                                           
4                      50                     40                                           
6                                                                    60                    
6 rows selected

Similar Messages

  • Convert rows to columns and put line break in between using t-sql

    Hi,
    I have a table with 5 columns..and my source data looks like this..
    RecordID  ID    Display          AddressType   EmailAddress
        1           1      GeneratedBy       From           
    [email protected]
        1           1      ReceivedBy         To               
    [email protected]
        1           1      ReceivedBy         To              
    [email protected]
        2           1
        3           1      GeneratedBy       From         
    [email protected]
        3           1      GeneratedBy       From          [email protected]
        3           1      ReceivedBy         To             
    [email protected]
    I need  t-sql to show output as..
    RecordID   ID    FullDisplay
       1       1     GeneratedBy  From -
    [email protected]  < CHAR(13) - Need Line Break here so that it goes to 2nd line>
                       ReceivedBy   To   - 
    [email protected] ; To -
    [email protected]
       2       1      Null
       3       1      GeneratedBy From -
    [email protected] ; From -
    [email protected]  < CHAR(13) - Need Line Break here so that it goes to 2nd line>
                      ReceivedBy  To   -
    [email protected]
    Display field will have 3 values - "GeneratedBy" , "ReceivedBy"  or Null
    AddresType field will have  3 values - "From" , "To" and Null.
    In the above example, Those 7 records belongs to ID=1.
    Whenever RecordID is same I want to show everything in one line with line breaks in between.
    In the above example RecordID=1 has 3 rows, display it as 1 row. But Whenever 'ReceivedBy' is there for same recordID put a line break before "ReceivedBy"
    create Statement:
    Create Table SampleTest
    (RecordID int null, ID int null , Dispplay varchar(20) null, AddressType varchar(6) null , EmailAddress Varchar(25) null)
    Insert Statement:
    Insert into SampleTest (RecordID ,ID,Display,AddressType,EmailAddress) values (1,1,'GeneratedBy','From','[email protected]')
    Insert into SampleTest (RecordID ,ID,Display,AddressType,EmailAddress) values (1,1,'ReceivedBy','To','[email protected]')
    Insert into SampleTest (RecordID ,ID,Display,AddressType,EmailAddress) values (1,1,'ReceivedBy','To','[email protected]')
    Insert into SampleTest (RecordID ,ID,Display,AddressType,EmailAddress) values (2,1,  Null,Null,Null)
    Insert into SampleTest (RecordID ,ID,Display,AddressType,EmailAddress) values (3,1,'GeneratedBy','From','[email protected]')
    Insert into SampleTest (RecordID ,ID,Display,AddressType,EmailAddress) values (3,1,'GeneratedBy','From','[email protected]')
    Insert into SampleTest (RecordID ,ID,Display,AddressType,EmailAddress) values (3,1,'ReceivedBy','To','[email protected]')
     Thanks!
    sql

    Try below
    drop table SampleTest
    GO
    Create Table SampleTest
    (RecordID int null, ID int null , Display varchar(20) null, AddressType varchar(6) null , EmailAddress Varchar(25) null)
    --Insert Statement:
    Insert into SampleTest (RecordID ,ID,Display,AddressType,EmailAddress) values (1,1,'GeneratedBy','From','[email protected]')
    Insert into SampleTest (RecordID ,ID,Display,AddressType,EmailAddress) values (1,1,'ReceivedBy','To','[email protected]')
    Insert into SampleTest (RecordID ,ID,Display,AddressType,EmailAddress) values (1,1,'ReceivedBy','To','[email protected]')
    Insert into SampleTest (RecordID ,ID,Display,AddressType,EmailAddress) values (2,1, Null,Null,Null)
    Insert into SampleTest (RecordID ,ID,Display,AddressType,EmailAddress) values (3,1,'GeneratedBy','From','[email protected]')
    Insert into SampleTest (RecordID ,ID,Display,AddressType,EmailAddress) values (3,1,'GeneratedBy','From','[email protected]')
    Insert into SampleTest (RecordID ,ID,Display,AddressType,EmailAddress) values (3,1,'ReceivedBy','To','[email protected]')
    with CTE1 as
    select ROW_NUMBER() over(PARTITION by RecordID ,ID,Display order by EmailAddress)rno,* From SampleTest
    ), CTE2 as (
    select RecordID ,ID,'GeneratedBy '+ STUFF(( SELECT '; From - ' + EmailAddress AS [text()]
    FROM CTE1 b
    WHERE
    a.RecordID=b.RecordID and a.ID=b.ID and b.Display = 'GeneratedBy'
    FOR XML PATH('')
    ), 1, 2, '' ) GeneratedBy,
    'ReceivedBy '+ STUFF(( SELECT '; To - ' + EmailAddress AS [text()]
    FROM CTE1 b
    WHERE
    a.RecordID=b.RecordID and a.ID=b.ID and b.Display = 'ReceivedBy'
    FOR XML PATH('')
    ), 1, 2, '' ) ReceivedBy
    From CTE1 a
    group by RecordID ,ID
    select RecordID ,ID,GeneratedBy +CHAR(13)+ ReceivedBy as FullDisplay from CTE2
    Thanks
    Saravana Kumar C

  • How to display more than 30 columns in one line?

    Hi,
    I want to display some 30 columns in the report.
    I dont want to split it into sub reports.
    How can i do.
    In that i have 3 groups.
    For each group i need one total.
    For example.
    after group 3 i need sub-total
    after group 2 i need total
    after group 1 i need Grand-total.
    Please help me to solve this issue.
    Thanks in advance,
    Saravanakumar.

    Sorry about that,
    Ill tell you clearly.
    Actualy I am having 12 columns, under each column, i have 5 sub-columns.
    I couldn't accomodate all the columns in a single horizontal line(I tried in A2 paper size).
    So i decided to have cross tab. Because top 5 columns can be dinamic.
    How can have subtotals inside cross tab after each group.
    Thanks ,
    Saravanakumar

  • Remove JTable row and column in one event

    Hello,
    I 've using matrix table in one application.
    i need to remove both column and row in single event.
    For this i construct
    JTable(data[][], header[]);
    because dynamically increase data's and header's
    What can i do for this?

    Create a method that does:
    DefaultTableModel model = (DefaultTableModel)table.getModel();
    model.removeRow(...)
    model.setRowCount(...)
    Read the DefaultTableModel API for more information.

  • Site does not dispay column in one line(word wrap) but correctly dispays in IE8.

    When I upgraded to FF23, the display on one page will break as follows<br />
    SummaryNewsChartsResearchValue AnalyzerTechnicalInsightEstimatesCompany ProfileFinancialsOptions<br />
    but in IE8 it displays as<br />
    SummaryNewsChartsResearchValueAnalyzerTechnicalInsightEstimatesCompanyProfileFinancialsOptions<br />
    Each word is surrounded by a box, but cut and paste does not include the surrounding boxes.<br />
    In addition, one page does not break a column of data, but overlays it onto the first data column. I use column to mean two separate page data elements of text. When I use the View, Page Style, No Style the page displays the data correctly spaced. I have tried different fonts, but have been unable to correct the display. I have tried disabling plugins but not change.

    If you have made changes to Advanced font settings like increasing the minimum/default font size then try the default minimum setting "none" and the default font size 16 in case the current setting is causing problems.
    *Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
    Make sure that you allow pages to choose their own fonts.
    *Tools > Options > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"
    It is better not to increase the minimum font size, but to use an extension to set the default page zoom to prevent issues with text not being displayed properly.
    You can use an extension to set a default font size and page zoom on web pages.
    *Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
    *NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

  • Rows to columns inOA framework

    Hi, i have a requirement where i want to display rows to columns
    In one page i am having column1 and values given below Example
    COLUMN1
    ~~~~~~
    lux
    liril
    rin
    Now i wnt to display in another page as ROW values as column as shown below
    LUX LIRIL RIN
    can any one help me
    regards
    vamsi

    Hi,
    Create a transient VO with number of attributes match as of VO row you have.
    Iterate VO rows and set Transient VO attributes with row values. Now you have 1 row in transient vo, you can use this row as attributes of FlowLayout.
    Regrds,
    Mukesh Uchaniya

  • Writing all the rows in one line but cannot write more than 32767 character

    Dear All,
    i am trying to write the column of a table to a file with the '||' seperators. i want to write all the rows in one line of the file.
    for E.g
    Column1 Column2
    A B
    C D
    in the file the output needs to be gone like
    A||B||C||D
    but after 32767 character it gives a write error. could please someone let me know what is wrong with my function below or how can i write more than 32767 character in one one.
    CREATE OR REPLACE FUNCTION CORP_IB_DUMP_FILE (
    P_QUERY IN VARCHAR2,
    P_SEPARATOR IN VARCHAR2 DEFAULT '',
    P_DIR IN VARCHAR2,
    P_FILENAME IN VARCHAR2
    RETURN NUMBER AUTHID CURRENT_USER
    IS
    L_OUTPUT UTL_FILE.FILE_TYPE;
    L_THECURSOR INTEGER DEFAULT DBMS_SQL.OPEN_CURSOR;
    L_THECURSOR2 INTEGER DEFAULT DBMS_SQL.OPEN_CURSOR;
    L_COLUMNVALUE VARCHAR2 (4000);
    L_STATUS INTEGER;
    L_COLCNT NUMBER DEFAULT 0;
    L_SEPARATOR VARCHAR2 (10) DEFAULT '';
    L_CNT NUMBER DEFAULT 0;
    BEGIN
    L_OUTPUT := UTL_FILE.FOPEN (P_DIR, P_FILENAME, 'w', 32767);
    DBMS_SQL.PARSE (L_THECURSOR, P_QUERY, DBMS_SQL.NATIVE);
    FOR I IN 1 .. 255
    LOOP
    BEGIN
    DBMS_SQL.DEFINE_COLUMN (L_THECURSOR, I, L_COLUMNVALUE, 4000);
    L_COLCNT := I;
    EXCEPTION
    WHEN OTHERS
    THEN
    IF (SQLCODE = -1007)
    THEN
    EXIT;
    ELSE
    RAISE;
    END IF;
    END;
    END LOOP;
    DBMS_SQL.DEFINE_COLUMN (L_THECURSOR, 1, L_COLUMNVALUE, 4000);
    L_STATUS := DBMS_SQL.EXECUTE (L_THECURSOR);
    LOOP
    EXIT WHEN (DBMS_SQL.FETCH_ROWS (L_THECURSOR) <= 0);
    L_SEPARATOR := '';
    FOR I IN 1 .. L_COLCNT
    LOOP
    DBMS_SQL.COLUMN_VALUE (L_THECURSOR, I, L_COLUMNVALUE);
    UTL_FILE.PUT (L_OUTPUT, L_SEPARATOR || L_COLUMNVALUE);
    L_SEPARATOR := P_SEPARATOR;
    UTL_FILE.FFLUSH (L_OUTPUT);
    END LOOP;
    UTL_FILE.FFLUSH (L_OUTPUT);
    L_CNT := L_CNT + 1;
    END LOOP;
    DBMS_SQL.CLOSE_CURSOR (L_THECURSOR);
    UTL_FILE.FCLOSE (L_OUTPUT);
    RETURN L_CNT;
    END CORP_IB_DUMP_FILE;
    /

    user577300 wrote:
    Dear All,
    i am trying to write the column of a table to a file with the '||' seperators. i want to write all the rows in one line of the file.
    for E.g
    Column1 Column2
    A B
    C D
    in the file the output needs to be gone like
    A||B||C||D
    but after 32767 character it gives a write error. could please someone let me know what is wrong with my function below or how can i write more than 32767 character in one one.
    CREATE OR REPLACE FUNCTION CORP_IB_DUMP_FILE (
    P_QUERY IN VARCHAR2,
    P_SEPARATOR IN VARCHAR2 DEFAULT '',
    P_DIR IN VARCHAR2,
    P_FILENAME IN VARCHAR2
    RETURN NUMBER AUTHID CURRENT_USER
    IS
    L_OUTPUT UTL_FILE.FILE_TYPE;
    L_THECURSOR INTEGER DEFAULT DBMS_SQL.OPEN_CURSOR;
    L_THECURSOR2 INTEGER DEFAULT DBMS_SQL.OPEN_CURSOR;
    L_COLUMNVALUE VARCHAR2 (4000);
    L_STATUS INTEGER;
    L_COLCNT NUMBER DEFAULT 0;
    L_SEPARATOR VARCHAR2 (10) DEFAULT '';
    L_CNT NUMBER DEFAULT 0;
    BEGIN
    L_OUTPUT := UTL_FILE.FOPEN (P_DIR, P_FILENAME, 'w', 32767);
    DBMS_SQL.PARSE (L_THECURSOR, P_QUERY, DBMS_SQL.NATIVE);
    FOR I IN 1 .. 255
    LOOP
    BEGIN
    DBMS_SQL.DEFINE_COLUMN (L_THECURSOR, I, L_COLUMNVALUE, 4000);
    L_COLCNT := I;
    EXCEPTION
    WHEN OTHERS
    THEN
    IF (SQLCODE = -1007)
    THEN
    EXIT;
    ELSE
    RAISE;
    END IF;
    END;
    END LOOP;
    DBMS_SQL.DEFINE_COLUMN (L_THECURSOR, 1, L_COLUMNVALUE, 4000);
    L_STATUS := DBMS_SQL.EXECUTE (L_THECURSOR);
    LOOP
    EXIT WHEN (DBMS_SQL.FETCH_ROWS (L_THECURSOR) <= 0);
    L_SEPARATOR := '';
    FOR I IN 1 .. L_COLCNT
    LOOP
    DBMS_SQL.COLUMN_VALUE (L_THECURSOR, I, L_COLUMNVALUE);
    UTL_FILE.PUT (L_OUTPUT, L_SEPARATOR || L_COLUMNVALUE);
    L_SEPARATOR := P_SEPARATOR;
    UTL_FILE.FFLUSH (L_OUTPUT);
    END LOOP;
    UTL_FILE.FFLUSH (L_OUTPUT);
    L_CNT := L_CNT + 1;
    END LOOP;
    DBMS_SQL.CLOSE_CURSOR (L_THECURSOR);
    UTL_FILE.FCLOSE (L_OUTPUT);
    RETURN L_CNT;
    END CORP_IB_DUMP_FILE;
    /Check your logic very carefully. You are using UTL_FILE.PUT() which should not automatically put end-of-line characters i n your file but you are reassigning l_seperator with p_seprator after the first time.
    What value are you pasising in as p_seperator?
    UTL_FILE.PUT() should allow you to write a string of bytes without newlines as long as its arguments are less than 32K, and you can control when the newlines get written. If your arguments are > 32K can you split them up without writing the newlines until you need to do so? Try something like (untested)
    --         UTL_FILE.PUT (L_OUTPUT, L_SEPARATOR || L_COLUMNVALUE);
               UTL_FILE.PUT (L_OUTPUT, substr(L_SEPARATOR || L_COLUMNVALUE,1,32767));
               UTL_FILE.PUT (L_OUTPUT, substr(L_SEPARATOR || L_COLUMNVALUE),32767*2-1,32767));Edited by: riedelme on Sep 10, 2012 6:11 AM

  • I wanted to display the multiple rows in one row but column should be diff

    Hi
    Could any body help me regarding this query how to write to get the multiple rows in one row.
    eg.
    i have one table tab1(eno number,ename varchar2,uid1 varchar2,uid2 varchar2,uid3 varchar4)
    but when i am runing the query I am getting multiple record against one eno number because of uid1,uid2,uid3
    suppose value of table is
    eno ename uid1 uid2 uid3
    1 a u1
    1 a u2
    1 a u3
    when i am quering it is coming same as above but I want in one row
    eno ename uid1 uid2 uid3
    1 a u1 u2 u3
    can any onle help me how to write the query for this requirement.
    thanks
    saif

    which is hard coded in my code? Here another approach, but fail for c as there is no information for the value of a column: does 1 in u1 means col 1, etc.
    /* Formatted on 2012/05/29 16:29 (Formatter Plus v4.8.8) */
    WITH t AS
         (SELECT 1 col1, 'a' col2, 'u1' col3
            FROM DUAL
          UNION ALL
          SELECT 1 col1, 'a' col2, 'u2' col3
            FROM DUAL
          UNION ALL
          SELECT 1 col1, 'a' col2, 'u3' col3
            FROM DUAL
          UNION ALL
          SELECT 1 col1, 'b' col2, 'u1' col3
            FROM DUAL
          UNION ALL
          SELECT 1 col1, 'b' col2, 'u3' col3
            FROM DUAL
          UNION ALL
          SELECT 1 col1, 'b' col2, 'u2' col3
            FROM DUAL
          UNION ALL
          SELECT 1 col1, 'c' col2, 'u1' col3
            FROM DUAL
          UNION ALL
          SELECT 1 col1, 'c' col2, 'u3' col3
            FROM DUAL)
    SELECT   xx.col1, xx.col2, MAX (DECODE (xx.rn, 1, col3)) AS uid1, MAX (DECODE (xx.rn, 2, col3)) AS uid2,
             MAX (DECODE (xx.rn, 3, col3)) AS uid3
        FROM (SELECT t.col1, t.col2, t.col3, ROW_NUMBER () OVER (PARTITION BY col1, col2 ORDER BY col3) rn
                FROM t) xx
    GROUP BY col1, col2;output:
    COL1     COL2     UID1     UID2     UID3
    1     a     u1     u2     u3
    1     b     u1     u2     u3
    1     c     u1     u3
    Edited by: ʃʃp on May 29, 2012 2:30 AM

  • How Calculate more than one value and store it into to different rows and column for each input?

    thx guys.....i have a progress now in LV
    But now i have new trouble here. Ok i attached my LV file (LV 7.0.1/7.1) and excel form. I just could'nt calculate more than one input value. I want a different result for each value that i enter ... and store it into different rows and column. But it just store at one row.
    Attachments:
    My Project.vi ‏31 KB
    rumus motor bakar.xls ‏14 KB

    duplicate post

  • Lines inside rows and columns...

    Hi,
    If I have a table in which I have styled via CSS, and used
    the border rules to define all sides of the table...what about if I
    want the lines to carry through all rows and columns, not just the
    outer most container? How do I get it to do just that? (the way it
    does if you use the default table settings in the property
    inspector)
    Thanks!

    Remove the border-collapse: collapse style from your table's
    CSS. Then you
    will get borders around the table and each cell. It will get
    blocky though
    because the borders will be doubled between cells.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "r_tist" <[email protected]> wrote in
    message
    news:gqdphp$7dk$[email protected]..
    > Hi,
    >
    > If I have a table in which I have styled via CSS, and
    used the border
    > rules to
    > define all sides of the table...what about if I want the
    lines to carry
    > through
    > all rows and columns, not just the outer most container?
    How do I get it
    > to do
    > just that? (the way it does if you use the default table
    settings in the
    > property inspector)
    >
    > Thanks!
    >

  • Line chart with one line per distinct column value

    Hi,
    For example I have a task dataobject with three fields
    type
    timeCompleted
    duration
    I would like to have a line chart that plots the average duration of tasks over time. With a separate line for each task type. Is this possible? All the examples seem to have one line correspond to one column on the dataobject.
    Jeremy

    Hi Alexandre,
    Thanks for the reply. I understand now, I didn't realise you could add the same data object multiple times with different filters. So for each task type I add the task data object to the view with a filter on the task type and this creates a new line in the chart.
    I was hoping that when data for a new task type reached the bam then I could make it automatically create a new line in the graph for that type. Oh well, I guess the creation of a new task type will be relativly rare.
    Jeremy

  • How to auto divide a one-line string into several rows in jsf?

    <h:outputText value="#{msgs.aim}"     styleClass="content_text_darkblue"></h:outputText>
    for example, the #{msgs.aim} will be a long string that one line cannot output. how can i make it auto-break according to the row length instead of show a horizontal scrollbar?
    in raw html code, i know i can include the content inside a <p> tag. but in jsf, i found it impossible to do in this way, although i tried to use <f:verbatim> tag
    can any1 give me some idea about this?

    Hello,
    Why not <h:inputTextarea> ? It makes this automatically for you and you can user readonly="true" to render it as a fictive outputTextarea...
    See example:
    <h:inputTextarea value="#MyBean.description}" rendered="true" required="false" rows="20" cols="80" id="description" readonly="true" />
    Hope you agree.
    sunjavero

  • Resulting grid does not contain at least one row, one column and one POV

    I have upgraded to 9.3.3 recently.
    We have a front end app which will run MDX queries to retrieve data.
    Sometimes based on the users selections MDX query might get back nothing i.e will get #missing across all rows/columns and this works fine with the existing 9.3.1 essbase server.
    If I run the same query against a 9.3.3 essbase cube I get the error "Resulting grid does not contain at least one row, one column and one POV. If you have any suppress row options selected pls clear them."
    I DO NOT have Supress missing data/zero enabled. Not sure why I get this error even though I dont have that option enabled.
    Essbase 9.3.3 on HP-UX ITanium 11.31
    APS 9.3.3 on win 2003 R2
    Smartview 9.3.3 - also tried with smartview 9.3.1.6 and see the same error.
    Any suggestions to fix this issues?

    The front end is using a VBA command "hypexecutequery" and with 9.3.3 essbase I get a return code -9 which means Operation was cancelled as per the smartview doc.
    In 9.3.1 essbase I get the return code 0 which means the query is fine even if it does not return any data.
    The query I am using now will return nothing as it is a check to see if there is any data. But with 9.3.3 Essbase I get an error code -9 which looks like it does not like the syntax or something.
    Any suggestions?

  • Print one label from Address Book, by row or column?

    OK, I select an address, go to print, select which label, Avery etc...
    ... then what?
    It seems that unless I want row 1, column 1, I'm out of options - except to get Word to print it instead.
    Am I really missing something, or can it not do this simple task?

    I have the exact same question. I found a cool program called Imprint (http://www.ampersandbox.com/imprint/) that seamlessly solved this. However, as I then discovered, I was unable to register the software as they are no longer selling it. I've emailed them and am hoping they can help. Being able to choose what column and row to start printing at is a no-brainer!
    Thanks,
    Walter

  • More than one SDO_GEOMETRY columns in one Oracle 8i spatial table

    I have a spatial table as follows:
    CREATE TABLE TEST(
    ID VARCHAR2(255) NOT NULL,
    POINT MDSYS.SDO_GEOMETRY,
    LINE MDSYS.SDO_GEOMETRY,
    POLYGON MDSYS.SDO_GEOMETRY,
    PRIMARY KEY(ID));
    Is it a good practice to have more than one SDO_GEOMETRY columns
    in one spatial table? What are the drawbacks if any to have a
    spatial with more than one layer?

    I have one question about more than one SDO_GEOMETRY columns
    in one table in Oracle 8.1.7. When I wanted to create two
    spatial indices for this table, every time I got some error.
    Can anyone tell me how to figure it out?
    Thanks very much,
    Fan Fan,
    You need to insert metadata record before creating spatial
    indices.
    Try the following:
    REM USER_SDO_GEOM_METADATA :
    REM insert a row for the geom layer for TEST TEST2 tables
    REM
    INSERT INTO USER_SDO_GEOM_METADATA
    ( TABLE_NAME, COLUMN_NAME, DIMINFO, SRID)
    VALUES ('TEST', 'POINT', MDSYS.SDO_DIM_ARRAY
    (MDSYS.SDO_DIM_ELEMENT('LON', -180,
    180, .000005),MDSYS.SDO_DIM_ELEMENT('LAT', -90, 90, .000005)),
    NULL);
    INSERT INTO USER_SDO_GEOM_METADATA
    ( TABLE_NAME, COLUMN_NAME, DIMINFO, SRID)
    VALUES ('TEST', 'LINE', MDSYS.SDO_DIM_ARRAY
    (MDSYS.SDO_DIM_ELEMENT('LON', -180,
    180, .000005),MDSYS.SDO_DIM_ELEMENT('LAT', -90, 90, .000005)),
    NULL);
    INSERT INTO USER_SDO_GEOM_METADATA
    ( TABLE_NAME, COLUMN_NAME, DIMINFO, SRID)
    VALUES ('TEST', 'POLYGON', MDSYS.SDO_DIM_ARRAY
    (MDSYS.SDO_DIM_ELEMENT('LON', -180,
    180, .000005),MDSYS.SDO_DIM_ELEMENT('LAT', -90, 90, .000005)),
    NULL);
    REM create a spatial index based on TRAFFIC.GEOM
    REM
    REM
    CREATE INDEX TEST_G_POINT_IDX ON TEST(POINT) INDEXTYPE IS
    MDSYS.SPATIAL_INDEX;
    CREATE INDEX TEST_G_LINE_IDX ON TEST(LINE) INDEXTYPE IS
    MDSYS.SPATIAL_INDEX;
    CREATE INDEX TEST_G_POLYGON_IDX ON TEST(POLYGON) INDEXTYPE IS
    MDSYS.SPATIAL_INDEX;

Maybe you are looking for

  • Wifi not working on Apple Tv2

    PLEASE help. This is driving me nuts! I have an apple tv (second generation) and this morning I noticed I had no internet connection. I've been using the wireless capability on the device and it has worked fine until just now. I haven't changed anyth

  • How do I use Time Capsule as a wireless router and turn my current one into modem only

    I have a crappy modem/ router and before I purchase a new modem I want to use the modem (no wireless) feature of my router. Question #1 How do I use my Time Capsule as a router? Question #2 If I do this will I still be able to wirelessly back up to m

  • Hard-drive Crash!! - Possible to get files from Apple TV to my new hdd?

    My hard-drive just crashed and I just received the new hard-drive. I was wondering if there is a possiblity to restore into my new hard-drive the files I had downloaded from my old hard-drive to my apple TV. I have a alot of music, photos etc on my a

  • FORMATTING_ERROR - Message ID : SSFCOMPOSER  in Smartform

    Hi All, I am getting a strange issue for dynamic logo in smartform. I am unable to preview the form and getting the following error. "Graphic cannot be displayed" . Message number : 159. The graphics are stored as standard texts in development server

  • 9.0.2 OID Integration Questions

    Hi, I have 9.0.2 running with 9iAS V2 fine. I need to understand exactly how IFS integrates with OID, Specifically : 1) If I create an account in OID - how do I "enable" this as a valid login on IFS? 2) If I create an account in OID - how can I set t