RRI calling Web Browser instead ABAP program

Hi All,
I have created a RRI to call an ABAP program. However, when I try to call the ABAP program (via GOTO) it opens a web browser.
If I execute the same query via RSRT, and call the ABAP program it works fine.
I have also create another RRI to call another query from within BEx and it works fine.
It only fails when calling ABAP program from BEx.
I have read on to apply SAP NOTE 972514 - Set the ms/redirect_version parameter to value 1 and restart your ABAP Web Application.
My ms/redirect is already = 1
Any ideas?
Thanks,
Flavio

I do have authorization. There is no error. It just open a internet explore (URL) instead of executing the ABAP program.
Again, if I run the query via RSRT, it works just fine.
Any ideas?
cheers,
Flavio

Similar Messages

Calling external web service from ABAP Program

Hi All,
Can somebody point me to the documentation where how to call an external (3rd party) web service from ABAP program is explained?
Thanks & Regards,
-Smita

which version of R/3 you are using. if you are on was 6.40 its very simple, there are delivered tools to generate client proxy for consuming webservice. if you are on wa 6.20 you can use cl_http_client to achieve the same. check out the following weblogs.
/people/durairaj.athavanraja/blog/2005/07/12/send-sms-to-india-from-abap
/people/thomas.jung3/blog/2005/05/13/calling-webservices-from-abap-via-https
/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap
Regards
Raja

Calling web service from ABAP - version 4.6C

Hi,
I would like to know how to call a web service from ABAP. Version is 4.6C. Any help would be greatly appreciated.
Thank you,
Rekha

Hi Rekha,
Please go through these..
call web service using ABAP
http://help.sap.com/saphelp_nw04/helpdata/en/a0/da0710b6560a4e80fb94f3f712dfc0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e9/ae1b9a5d2cef4ea4b579f19d902871/frameset.htm
Hope these help you!
cheers,
Prashanth

How to call subroutines defined in ABAP program with type S

how to call subroutines defined in ABAP program with type S? can you give an example?

Normal executable program,
REPORT ZTEST_MAIN.
perform sub1 in program ztest_sub.
"you can call using in program addition
Subroutine pool program
PROGRAM ZTEST_SUB.
form sub1.
endform.

How to call a idoc in abap program and updates catsdb table

how to call a idoc in abap program and updates catsdb table
thank you,
Jagrut BharatKumar Shukla

Hi Kishan,
You can refer to following help document,
http://help.sap.com/saphelp_nw04/helpdata/en/bf/d005244e9d1d4d92b2fe7935556b4c/content.htm
Regards,
Meera

Is it possible to call web service from ABAP SAP 4.6 c..If yes how

Hi Friends,
Is it possible to call web service from ABAP-SAP 4.6 c..If yes Could you please let me know how.
Thanks in Advance.
Murali Krishna K
Edited by: Murali Krishna Kakarla on Jan 26, 2008 7:09 PM
Edited by: Murali Krishna Kakarla on Jan 26, 2008 7:11 PM

Olivier CHRETIEN wrote:>
> Hi Terry,
>
> So these function modules must use the SAPHTTPA RFC destination which uses the exe saphttp.exe ?
>
> How much abap code lines do you have for a web service call ?
> Do you have to code the call specifically for each different web service ?
> Are you able to use the WSDL ?
>
> Nice job if you have coded your own private SOAP runtime !
>
> But I don't think this is an easy solution for everybody...
>
> Regards,
>
> Olivier
Yes, SAPHTTPA (runs on application server) and/or SAPHTTP (runs on front-end pc), one of which, is required for HTTP communication. So far, nothing too elaborate as far as SOAP goes, but the logic is simplistic. Here's some sample code:
DEST = 'SAPHTTPA'.
TRANSLATE HOST TO LOWER CASE.
MYURL = 'wssrvTest/Service.asmx/GetByOrderItem'.
CONCATENATE HOST MYURL INTO MYURL.
REQUEST_HEADERS-DATA =
              'Content-type: application/x-www-form-urlencoded'.
APPEND REQUEST_HEADERS.
CLEAR REQUEST_HEADERS.
*........Convert Order Number to External Format........................
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
       EXPORTING
            INPUT = ORDER
       IMPORTING
            OUTPUT = ORDER.
*........Convert Item Number to External Format.........................
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
       EXPORTING
            INPUT = ITEM
       IMPORTING
            OUTPUT = ITEM.
*........Convert Material Number to External Format.....................
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
       EXPORTING
            INPUT = MATERIAL
       IMPORTING
            OUTPUT = MATERIAL.
CONCATENATE 'sOrder=' ORDER
               INTO REQUEST_BODY-DATA.
APPEND REQUEST_BODY.
CLEAR REQUEST_BODY.
CONCATENATE '&sItem=' ITEM
               INTO REQUEST_BODY-DATA.
APPEND REQUEST_BODY.
CLEAR REQUEST_BODY.
CONCATENATE '&sMaterial=' MATERIAL
              INTO REQUEST_BODY-DATA.
APPEND REQUEST_BODY.
CLEAR REQUEST_BODY.
CALL FUNCTION 'HTTP_POST'
       EXPORTING
            ABSOLUTE_URI          = MYURL
            RFC_DESTINATION       = DEST
            BLANKSTOCRLF          = 'X'
       TABLES
            RESPONSE_ENTITY_BODY = RESPONSE_BODY
            REQUEST_ENTITY_BODY   = REQUEST_BODY
            RESPONSE_HEADERS      = RESPONSE_HEADERS
            REQUEST_HEADERS       = REQUEST_HEADERS
       EXCEPTIONS
            CONNECT_FAILED        = 1
            TIMEOUT               = 2
            INTERNAL_ERROR        = 3
            TCPIP_ERROR           = 4
            DATA_ERROR            = 5
            SYSTEM_FAILURE        = 6
            COMMUNICATION_FAILURE = 7
            OTHERS                = 8.
CHECK SY-SUBRC = 0. "more appropriate msg goes here
LOOP AT RESPONSE_BODY.
    IF RESPONSE_BODY+0(7) <> '<string' AND
       RESPONSE_BODY+0(8) <> '</string' AND
       RESPONSE_BODY+0(5) <> '<?xml'.
      SPLIT RESPONSE_BODY-DATA AT '=' INTO FIELD_NAME FIELD_VALUE.
      TRANSLATE FIELD_NAME TO UPPER CASE.
      CASE FIELD_NAME.
        WHEN 'HEIGHT'.
          HEIGHT = FIELD_VALUE.
        WHEN 'WIDTH'.
          WIDTH = FIELD_VALUE.
        WHEN 'LENGTH'.
          LENGTH = FIELD_VALUE.
        WHEN 'WEIGHT'.
          WEIGHT = FIELD_VALUE.
        WHEN 'QTY'.
          QTY = FIELD_VALUE.
      ENDCASE.
    ENDIF.
ENDLOOP.
Hope this helps...
Terry
Edited by: Terry West on Feb 4, 2008 3:08 PM

Call SXPG _ CALL _ SYSTEM from ABAP program

Hi,
Someone may help me? I need to call the function module SXPG _ CALL _ SYSTEM from ABAP program for to encrypt a file.
I created the command by SM49 , but I don't know how I can call it from ABAP program.
Thanks
Maria C

Hi Maria.
This is a possible code you can use:
DATA: log LIKE TABLE OF btcxpm WITH HEADER LINE.
Can contain STDOUT, STDERR
commandname =
CALL FUNCTION SXPG_CALL_SYSTEM
IMPORTING
COMMANDNAME = commandname
PARAMETERS = parameters
EXPORTING
STATUS = status
TABLES
EXEC_PROTOCOL = log
EXCEPTIONS
NO_PERMISSION = 1
COMMAND_NOT_FOUND = 2
PARAMETERS_TOO_LONG = 3
SECURITY_RISK = 4
WRONG_CHECK_CALL_INTERFACE = 5
PROGRAM_START_ERROR = 6
PROGRAM_TERMINATION_ERROR = 7
X_ERROR = 8
PARAMETER_EXPECTED = 9
TOO_MANY_PARAMETERS = 10
ILLEGAL_COMMAND = 11
OTHERS = 12.
The following are the comments of the parameters taken from:
http://help.sap.com/saphelp_40b/helpdata/en/fa/0971ee543b11d1898e0000e8322d00/content.htm
Parameters
IMPORTING Parameters
Parameter name
Use
COMMANDNAME
The name of the definition of the external command, as specified in the maintenance function (transaction SM69).
PARAMETERS
Arguments for the external command as specified by the definition in the R/3 System and by the calling program or user.
These arguments are checked for impermissible characters, such as the ; under UNIX. Problems are registered with the SECURITY_RISK exception.
EXPORTING Parameters
Parameter name
Use
STATUS
Returns the final status of the execution of the external command:
· Value O: The external command was started and ran to end successfully.
· Value E: An error occurred; the external command was not run successfully.
Tables Parameters
Parameter name
Use
EXEC_PROTOCOL
Contains the STDOUT and STDERR output of the external command and any output from the target host system.
Exceptions
Exception name
Meaning
X_ERROR
Reserved for future use.
NO_PERMISSION
The AUTHORITY-CHECK of the users authorization for the authorization object S_LOG_COM failed. The user is not authorized to carry out the command named with the specified arguments on the target system.
COMMAND_NOT_FOUND
Command name, as identified by COMMANDNAME and OPERATINGSYSTEM, has not been defined in the maintenance function (transaction SM69).
PARAMETERS_TOO_LONG
The combined argument string (ADDITIONAL_PARAMETERS and the DEFINED_PARAMETERS, as returned in ALL_PARAMETERS) exceeds the limit of 128 characters in length.
SECURITY_RISK
Either:
· The command contains impermissible characters. These are characters with potentially dangerous properties, such as ; under UNIX.
· The command definition specifies that an extra-check function module be run. This function module has rejected execution of the command.
WRONG_CHECK_CALL_
INTERFACE
The command definition specifies that an extra-check function module is to be run. Either this function module is missing, or the interface defined for this function module does not match that of the standard R/3 function module SXPG_DUMMY_COMMAND_CHECK. For more information, please see SXPG_DUMMY_COMMAND_CHECK: Interface for Extra-Check Function Modules.
TOO_MANY_PARAMETERS
The command definition specifies that user-specified arguments for the external command are not allowed. However, an additional string of command arguments was specified.
PARAMETER_EXPECTED
The command definition includes the placeholder character ?, which signifies that additional user-defined arguments are required. However, no additional arguments string was supplied.
PROGRAM_START_ERROR
An error occurred while starting the external command. The R/3 system field SY-MSGV1 contains additional information on the problem.
PROGRAM_TERMINATION_
ERROR
An error occurred while trying to obtain the return code of the external program. The R/3 system field SY-MSGV1 contains additional information on the problem.
ILLEGAL_COMMAND
The external command definition was modified "illegally". That is, the command was not modified by means of the maintenance function (transaction SM69).
The modified command is registered in the system log in its substituted form. The message is registered under the system log ID "LC".
OTHERS
Catch any new exceptions added to this function module.
Hope this will be useful.
Sandro Lombardo

Call to Java web service from abap program

HI,
I want to call to Java WS from abap program and i read some post how to do that in release of NW 6.4 but I want to know what is the simplest way to do that in release 7.0 .
Many Thanks,
Nina

Hi Uwe,
Thank you.
I have WSDL or URL how i can call to them ,in the example that you send i don't find the place that it called.
Do i have to create proxy for that ?
BR
Nina

Call Web Browser for WebService..

Hi all.
I have a problem.
There are a communication between SAP and WebService.
In background, SAP must call WebService periodically.
It calls the function 'CALL_BROWSER' with WebService URL in background and then raises a exception.
The Job log is
2006.03.16 16:49:28 Job started
2006.03.16 16:49:28 Step 001 started (program ZMMB040, variant &0000000000001, user name SCM032)
2006.03.16 16:49:28 No browser call is supported for your frontend
2006.03.16 16:49:29 ABAP/4 processor: RAISE_EXCEPTION
2006.03.16 16:49:29 Job cancelled
Please, Let me know how to call the WebService in background..
Thank you in advance.
Best regards.
Kil-Nam.

Hi,
Why don't you call web services as described in Thomas' weblog:
/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap
Eddy

Call an URL with ABAP program (Method POST)

Hi everyone,
I need to call an URL for example "www.google.com?q=hello" with ABAP using POST method.
Like the FM "Call_Browser", but my variable q=hello need to be passed with POST method.
Any idea ?
Thanks.

here is one example I use from abap to call a web browser ITS solution with a project number, I guess you can adapt the it for your purpose?
      check <data>-pspid is not initial.
      concatenate gv_pfs_link
                  'zpfs2?~okcode=PROJ_SEL&zpspid=<###>&sel_action=X'
      into lv_url.
      replace '<###>' with <data>-pspid into lv_url.
      condense lv_url no-gaps.
      cl_gui_frontend_services=>execute(
        exporting document = lv_url ).

How use a proxy consumer web service in ABAP Program with local interface

I generate a proxy class based on a WSDL file.
I want to use this class in an abap programm without a connection but using XML files in local.
I see with the class CL_PROXY_LOCAL_ADAPTER that it is possible to execute without connection but for use this, it's necessary to use the method REGISTER.
This method have two parameters : Class Name and Interface Name.
Class name is the name of my proxy class, but I don't know how to find the interface name.
I think that a local interface is needed to generate but I don't know how to generate in interface with entries in SPROXSIG table ?
Could you help me ?

Check out the following links to see if it meets your needs.. Has examples to call a ABAP proxy (that consumes a webservice) from ABAP program...
http://help.sap.com/saphelp_nw04/helpdata/en/bf/d005244e9d1d4d92b2fe7935556b4c/frameset.htm (webservices ->webservices toolset -> examples)
http://help.sap.com/saphelp_dm40/helpdata/en/1a/b69d427cab0831e10000000a1550b0/frameset.htm

How to call transaction in an abap program

how do we open a transaction thru an abap program and pass a parameter to it

Use call transaction. You can fill up the parameters in the BDC internal table
DATA:   bdc_tab LIKE bdcdata    OCCURS 0 WITH HEADER LINE.
DATA:   messtab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE.
CONSTANTS: c_tcode LIKE t130m-tcode VALUE 'FB01'. "Tcode you want to call
        CALL TRANSACTION c_tcode
             USING bdc_tab
             MODE   'N'
             UPDATE 'S'
             MESSAGES INTO messtab.
Error message will be captured in the messtab.
You can goto the SAP help on Call transaction to see all the details and options.
<b><REMOVED BY MODERATOR></b>
Thanks.
Message was edited by:
        Alvaro Tejada Galindo

Start Web Browser from ABAP in WINGUI with SSO

Hi,
I'm using WINGUI 6.20 patch 47. I need to start a separate web browser to display a BSP.
The difficulty is that we want single sign on to work. We have the portal set up for authentication and our instance is set up to create and accept logon tickets.
We've tried to use the html viewer control but I think this only works within the html gui ?
We've tried the CALL_BROWSER function but it doesn't seem to pass along the logon ticket.
Is there a way to do this ?
Thanks for your help.
Thierry Dagnino
Systems Architect
Hydro-Quebec

Hi Thomas,
the suggested solution works at 90 %.
The BSP we display in the html control calls another bsp in a popup window.
The popup requests the login again. I think this is because the popup starts a new Internet Explorer browser which has no session state.
The strange thing is that if I first start a browser and authenticate to the server and then run the function which displays the bsp in the html viewer, it works great. I think it uses the logon ticket that the browser received.
Everything else works but we can't use it if popups don't work since CRM 4.0 uses a lot of them.
Also, if we use the show_url_in_browser function, it works. The problem is we have a useless window displayed. Is there a way to close this window immediately after the show_url_in_browser method is called ?
Thanks.
Message was edited by: Thierry Dagnino

Procedure to Call Workflow Object from ABAP program in Se38

Hi All,
I have one scenario like i have to call one Workflow object from ABAP program in SE38.The scenario is like below.....
I have to select some records from database table.For example there are 100 records in the internal table.
For all that records i have to invoke Workflow for getting approval from the authorized persons. Once Approval has come to program, It will post one document in SAP and process ends.
Please suggest me how to move forward with this scenario.
Regards
Manas Ranjan Panda

Hi,
So you want to start a workflow from an ABAP, if an event exists for that particular workflow then the best way is to use fm SAP_WAPI_CREATE_EVENT,
to start a workflow from an ABAP you can use fm SAP_WAPI_START_WORKFLOW.
Kind regards, Rob Dielemans

Calling ITS Service via abap program

We have made an ITS Service (SAP GUI for HTML) for one of the R/3 programs (Customized).
If the URL is linked directly to the service, it shows correctly.
But if we call the service via transaction code as in: Call tcode Zabc..., it does not work.
How can we call the service directly from the abap program on the click of a button?
Thanks in advance.

Hi,
You can do something like this:
CALL FUNCTION 'CALL_BROWSER'
         EXPORTING
           url                          = path
           new_window                   = 'X'
         EXCEPTIONS
           frontend_not_supported       = 1
           frontend_error               = 2
           prog_not_found               = 3
           no_batch                     = 4
           unspecified_error            = 5
           OTHERS                       = 6
where PATH variable is ITS service url:
    CONCATENATE 'http://server:port/sap/bc/gui/sap/its/webgui?transaction=xxxxxx&okcode=xxxx INTO path.
Hope this helps,
Iván.

RRI calling Web Browser instead ABAP program

Similar Messages

Maybe you are looking for