RSTRAN_DUPREC_CHECK_OFF functionality of programm.
hi
please let me know of functionality about RSTRAN_DUPREC_CHECK_OFF program.
Regards,
KRishna.
Hi Rama,
Refer to technical background section for SAP note
1851875 - Consulting:DTP load terminates with error 'Package contains duplicate entries' in transformation processing in HANA DB
Due to missing duplicate check records in SAP HANA, there were issues in implementing end routine or expert routein.
SAP has suggested a workaround to fix up this issue using report
'SAP_RSADMIN_MAINTAIN' with Object = ' RSTRAN_DUPREC_CHECK_OFF' and Value = 'X' with the Insert option.
Hope this helps.
Regards,
Deepak Kori
Similar Messages
-
Delete function locks programme on laptop, not on desktop
When deleting RGB photos from my laptop, this fun ction locks the programme, but this does not happen on my desktop cs6. Any ideas, please
wighter76 wrote:
When you are nearly eighty and suffering from memory and other health problems…
I'm an old geezer myself and suffer from substantial brain atrophy, so I have some understanding of the situation. Still I find your response wanting and unreasonable—and your attitude appalling.
Old age and health issues are no excuse, I've learned to appreciate that.
You owe Christoph and the forum an unequivocal apology. -
Function of the further Programms when I use LabVIEW PDA
Hi,
I write my Bachelor Thesis over a PDA Application where I´ve create with LabVIEW PDA.
Before I could use the LabVIEW PDA I must install few programms.
1)VisualStudio 2005 Standard
2)Visual Studio 2005 Command Shell
3)Windows Mobile 5.0 SDK for Pocket PC
4)eMbedded Visual C++ 4.0
5)eMbedded Visual C++ 4.0 SP 4
Anybody knows what functions this Programms have? I don't need it for the whole time.
Thanks for your answer
capunze
Message Edited by capunze on 05-16-2006 10:40 AMThe way I understand it (I don't have any official knowledge, and I wouldn't mind hearing an explanation either), LV PDA converts its code into C code and then uses eVC to compile the code for the PDA. I assume you're using LV 8.0 because Visual Studio wasn't required in previous versions. Maybe it's also needed now in order to compile the code.
Try to take over the world! -
Need to know the standard function module/program in E recruitment
Hi All,
I need to know the standard function module/programm that defaults the 'Functional area' field in the posting page from the requisition page.
Early responce is greatly appreciated.
Thanks and best regards
RajeevHi Masa,
Thanks for your reply.
We are using Assets with the integration of Project systems. We are now in 4.6C R/3 & SRM 5.0 system. And now R/3 upgrade and SRM upgrade going on smultaniously to ECC6.0 and SRM 7.0 respectively.
I would like to know any new functionality available in the latest upgrades and we have done lot of customization for Asset Procurement. And would like to go with Vanilla.
Can you please provide me some inputs about the Project (WBS element ) based Asset Procurement in SRM as standard.
Thanks and Regards,
Ramesh -
Hi folks,
I started my career in informatics as a COBOL / mainframe programmer way back when the u2018Big Blueu2019 was the order of the day (it feels like as if it was a thousand years ago). Anyhow, as these legacy systems are on the verge of extinction, I decided to get into ABAP, thinking I can bank on my programming background. But it seems to me that the majority of the enterprises expect an u2018ABAPeru2019 to have instantaneous knowledge of any and all of their SAP modules, no matter what business they are in. God forbid if you say: Hey listen, Iu2019m a programmer and not a functional analyst and donu2019t know much about such and such area or so and so functionality. It is then that eyebrows are raised, eyes would start rolling and rumors would spread as to how unfunctional or better say dysfunctional you are!
Are u2018ABAPersu2019 supposed to be multiple Functional analysts, programmer(s), etc, all in one package? I mean, is this one of those: u201CBuy one, get many others for freeu201D deals? If that is the case, where do functional analysts come into play? Or am totally off base here and have lost it altogether?
I am just curious, how many u2018ABAPersu2019 have had the same experience and how did you remedy the situation, cause I am at my ropeu2019s end.
Yours truly
Unfunctional ABAPerArdavan, I saw your thread but haven't had a chance to reply until today. Even though you have closed it as 'answered', hopefully it's OK if I still add my 2 cents.
There are many similarities with my own situation. I too came to ABAP world from the mainframe background. Currently I'm actively searching for a new job and, just as you, I'm sometimes confused (if not disturbed) by what the employers are expecting from the ABAP developers.
I think it's safe to say that even an ABAP beginner would have some experience in at least one module. Naturally, an ABAPer cannot be expected to know as much as a functional expert. Basic familiarity with the tables (which may be found "on the netz"), document/process flow, basic terms (in "sapanese"), any ABAP related peculiarities (e.g. funky user exits and routines in SD) should be enough and this may be mastered in a month or so.
Also many modules "cross paths" frequently, so there is a good chance you in fact have more exposure than you think. E.g. SD frequently comes together with MM and FI. But what confuses me most is when the employers are looking for an ABAP developer with experience in HR, FI, PP, MM, WM topped with BI, XI, Web Dynpro and Java.
Why do employers do this? Well, for one - because with 10% unemployment they can. There are actually quite a few ABAPers out there (Otto? ) that might fit the description above. (Whether they'll be willing to work for this company at this location/salary - is another question.) Second, some companies really do have small SAP teams and one person might need to deal with many different things. This is rather an exception though and such companies might be more willing to consider someone who doesn't have everything on their "menu". Third, well, some companies just have poor talent management skills. They develop a unrealistic job description and then complain that they can't fill the position for months and all candidates are "unqualified". From my experience, these companies frequently end up either adjusting their expectations or happily hiring someone with a made-up resume.
(to be continued...) -
How to select a color of cell in REUSE_ALV_HIERSEQ_LIST_DISPLAY
Hi.
I need to select a color of a cell in REUSE_ALV_HIERSEQ_LIST_DISPLAY.
I have found an example, but
It shows how to select a color of sell in REUSE_ALV_LIST_DISPLAY.
Can you give me an example of code?
Thanks.Here ia a simple example of the method how to paint a cell / line / column using REUSE_ALV_HIERSEQ_LIST_DISPLAY function.
Programm: zalv_hierseq_color
Paint a line, a colomn, or a cell
using REUSE_ALV_HIERSEQ_LIST_DISPLAY
Victor Stupin, Russia 2009
REPORT zalv_hierseq_color.
TABLES: spfli.
TYPE-POOLS: slis.
SELECTION-SCREEN BEGIN OF BLOCK rad1.
PARAMETERS:
p_row TYPE i,
p_col TYPE i.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN ULINE.
SELECTION-SCREEN COMMENT /1(50) comm1.
SELECTION-SCREEN COMMENT /1(50) comm2.
SELECTION-SCREEN COMMENT /1(50) comm3.
SELECTION-SCREEN END OF BLOCK rad1.
INITIALIZATION.
comm1 = 'Paint a line: fill ONLY p_row (p_col is empty)'.
comm2 = 'Paint a colomn: fill ONLY p_col (r_row is empty)'.
comm3 = 'Paint a cell: fill P_COL and R_ROW'.
DATA:
t_fieldcat TYPE slis_t_fieldcat_alv,
fs_fieldcat LIKE LINE OF t_fieldcat,
fs_layout TYPE slis_layout_alv ,
w_color(4) ,
w_row TYPE i,
w_fieldname(20),
w_prog TYPE sy-repid.
DATA:
BEGIN OF t_spfli OCCURS 0,
color(4),
checkbox ,
cell TYPE slis_t_specialcol_alv,
carrid TYPE spfli-carrid,
connid TYPE spfli-connid,
cityfrom TYPE spfli-cityfrom,
cityto TYPE spfli-cityto,
distance TYPE spfli-distance,
keyln TYPE int4,
box TYPE char1,
lineno TYPE int4,
END OF t_spfli.
DATA:
fs_cell LIKE LINE OF t_spfli-cell.
DATA: gt_item LIKE TABLE OF t_spfli WITH HEADER LINE,
gt_header LIKE TABLE OF t_spfli WITH HEADER LINE,
gs_keyinfo TYPE slis_keyinfo_alv.
START-OF-SELECTION.
SELECT *
FROM spfli
INTO CORRESPONDING FIELDS OF TABLE t_spfli.
fs_fieldcat-row_pos = 1.
fs_fieldcat-col_pos = 1.
fs_fieldcat-tabname = 'GT_HEADER'.
fs_fieldcat-fieldname = 'CARRID'.
fs_fieldcat-ref_tabname = 'SPFLI'.
fs_fieldcat-key = 'X'.
fs_fieldcat-hotspot = 'X'.
APPEND fs_fieldcat TO t_fieldcat.
CLEAR fs_fieldcat .
fs_fieldcat-row_pos = 1.
fs_fieldcat-col_pos = 2.
fs_fieldcat-tabname = 'GT_HEADER'.
fs_fieldcat-fieldname = 'CONNID'.
fs_fieldcat-ref_tabname = 'SPFLI'.
fs_fieldcat-key = 'X'.
fs_fieldcat-hotspot = 'X'.
APPEND fs_fieldcat TO t_fieldcat.
CLEAR fs_fieldcat .
fs_fieldcat-row_pos = 1.
fs_fieldcat-col_pos = 3.
fs_fieldcat-tabname = 'GT_HEADER'.
fs_fieldcat-fieldname = 'DISTANCE'.
fs_fieldcat-key = ' '.
fs_fieldcat-edit = 'X'.
APPEND fs_fieldcat TO t_fieldcat.
CLEAR fs_fieldcat.
fs_fieldcat-row_pos = 1.
fs_fieldcat-col_pos = 4.
fs_fieldcat-tabname = 'GT_HEADER'.
fs_fieldcat-fieldname = 'CITYFROM'.
fs_fieldcat-ref_tabname = 'SPFLI'.
fs_fieldcat-key = ' '.
APPEND fs_fieldcat TO t_fieldcat.
CLEAR fs_fieldcat .
fs_fieldcat-row_pos = 1.
fs_fieldcat-col_pos = 5.
fs_fieldcat-tabname = 'GT_ITEM'.
fs_fieldcat-fieldname = 'CARRID'.
fs_fieldcat-ref_tabname = 'SPFLI'.
fs_fieldcat-key = 'X'.
fs_fieldcat-hotspot = 'X'.
APPEND fs_fieldcat TO t_fieldcat.
CLEAR fs_fieldcat .
fs_fieldcat-row_pos = 1.
fs_fieldcat-col_pos = 6.
fs_fieldcat-tabname = 'GT_ITEM'.
fs_fieldcat-fieldname = 'CONNID'.
fs_fieldcat-ref_tabname = 'SPFLI'.
fs_fieldcat-key = 'X'.
fs_fieldcat-hotspot = 'X'.
APPEND fs_fieldcat TO t_fieldcat.
CLEAR fs_fieldcat.
fs_fieldcat-row_pos = 1.
fs_fieldcat-col_pos = 7.
fs_fieldcat-tabname = 'GT_ITEM'.
fs_fieldcat-fieldname = 'DISTANCE'.
fs_fieldcat-key = ' '.
fs_fieldcat-edit = 'X'.
APPEND fs_fieldcat TO t_fieldcat.
CLEAR fs_fieldcat.
fs_fieldcat-row_pos = 1.
fs_fieldcat-col_pos = 8.
fs_fieldcat-tabname = 'GT_ITEM'.
fs_fieldcat-fieldname = 'CITYFROM'.
fs_fieldcat-ref_tabname = 'SPFLI'.
fs_fieldcat-key = ' '.
APPEND fs_fieldcat TO t_fieldcat.
p_col = p_col + 4.
LOOP AT t_fieldcat INTO fs_fieldcat WHERE tabname = 'GT_ITEM'.
IF fs_fieldcat-col_pos EQ p_col.
fs_fieldcat-emphasize = 'C600'.
w_fieldname = fs_fieldcat-fieldname.
IF p_row IS INITIAL AND p_col GT 0. " <---- paint only column if p_row is empty
MODIFY t_fieldcat FROM fs_fieldcat TRANSPORTING emphasize.
ENDIF.
ENDIF.
ENDLOOP.
fs_cell-fieldname = w_fieldname .
fs_cell-color-col = 6.
fs_cell-nokeycol = 'X'.
APPEND fs_cell TO t_spfli-cell.
IF p_row IS NOT INITIAL AND p_col IS NOT INITIAL. " <---- paint a cell
MODIFY t_spfli INDEX p_row TRANSPORTING cell.
ENDIF.
fs_layout-info_fieldname = 'COLOR'.
fs_layout-coltab_fieldname = 'CELL'.
fs_layout-f2code = '&ETA'.
gs_keyinfo-header01 = 'KEYLN'.
gs_keyinfo-item01 = 'KEYLN'.
LOOP AT t_spfli INTO gt_item.
gt_item-keyln = 1.
gt_item-lineno = gt_item-lineno + 1.
APPEND gt_item.
ENDLOOP.
READ TABLE t_spfli INDEX 1 INTO gt_header.
gt_header-keyln = 1.
gt_header-lineno = 0.
APPEND gt_header.
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
EXPORTING
is_layout = fs_layout
it_fieldcat = t_fieldcat
i_tabname_header = 'GT_HEADER'
i_tabname_item = 'GT_ITEM'
is_keyinfo = gs_keyinfo
TABLES
t_outtab_header = gt_header
t_outtab_item = gt_item
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF sy-subrc = 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF. -
ERROR in Invoice posting from XI to SRM in MM-SUS plan driven procurement
Hi
We are implementing MM-SUS plan driven procurement scenario. MM version is 4.7. we are using Z-Program to trigger Invoice i-doc from MM to XI. its reaching XI but from XI to SRM there is some error.
the error is DYNAMIC_CALL_FAILURE
Function call failed; could not find the function BBP_PD_SUSIV_GETLIST Programm: SAPLBBP_BD_DRIVER_SAPXML1; Include: LBBP_BD_DRIVER_SAPXML1U20; Line: 63
any help is appericiated.
Thanks,
ArvindHi Arvind,
From Xi to SRM, by the looks of it, you are calling a BAPI. Can you specify how is your scenario configured ?
If it is a BAPI, can you also try to test it(on the SRM box itself) from the Function Module test tool?
Pls let us know the results/details.
cheers
danus -
Missing PO in 2lis_02_itm init extraction / setup tables
Hello Gurus,
could anyone please help me out with this toppic:
I want to extract Purchase Orders to BW via DS 2lis_02_itm. Source System is R/3 4.6c. Filling up the setup tables is working. My problem is, that there are several Purchase Orders which are not filled in the setup tables (so no extraction to bw)! I have checked these PO and for me they seem fine. I can´t find any reason why they aren´t extracted. Of course i am running all programms whithout any restrictions. I have debugged the programm rmceneua with one specific po which is not extracted but can not find a reason why it is not written to table MC02M_SETUP.
Did i miss some customizing settings? Are there some kind of PO which are not extracted because of there PO Type (ZCO/ZB) do they eventually have a wrong status?
I can not find any information about the functionality of programm rmceneua. Maybe you can help me out of this?
Thanks a lot
JANOSDid you check whether the process key is maintained properly?
-
XBLNR field in DME file (classic payment medium program)
Hi ,
My client wants XBLNR field in the DME file which is created from automatic programme F110,can u please advise whether it is possible if yes can u please tell the procedure to do the same i.e whether we should use any function module , programme name to be changed and any includes to be made in the programme.
Regards,
RAMHi,
Please use the below logic,
DATA: lwa_item TYPE dmee_paym_if_type,
l_fpayp TYPE fpayp,
l_fpayh TYPE fpayh,
l_fpayhx TYPE fpayhx,
first_flag TYPE c,
lv_lifnr TYPE lifnr,
lv_vblnr TYPE vblnr,
invoice_id TYPE string,
invoice TYPE string,
invoice_len1 TYPE i,
invoice_len TYPE i.
TYPES:
BEGIN OF lt_regup,
xblnr TYPE xblnr1,
belnr TYPE belnr_d,
END OF lt_regup.
DATA: lt_regup TYPE STANDARD TABLE OF regup,
lv_regup TYPE regup. -
Sample ALV report required for FI module
Hello friends,
I am develoing ALV report for FI module for that i need some sample ALV report. If someone have than please send it to me.
Thanx & Regards,
Rahul TaleleHI,
SEE THE SAMPLE REPORT
Fringe Benefit Tax Report
Program Name :
Object ID :
Functional Analyst :
Programmer :
Start date :
Initial CTS :
Description : FRINGE Benefit Tax
Includes :
Function Modules :
Logical database :
Transaction Code :
External references :
Modification Log
Date | Modified by | CTS number | Comments
| | | Initial Version *
REPORT ZFI_FBT NO STANDARD PAGE HEADING LINE-SIZE 255.
TYPE-POOLS: SLIS.
TYPES : BEGIN OF
T_BSIS,
BUKRS TYPE BUKRS, " Company Code
HKONT TYPE HKONT, " General Ledger Account
GJAHR TYPE GJAHR,
BELNR TYPE BELNR_D, " Accounting Document Number
BUDAT TYPE BUDAT, " Posting Date in the Document
BLDAT TYPE BLDAT, " Document Date in Document
XBLNR TYPE XBLNR1, " Reference Document Number
BSCHL TYPE BSCHL, " Posting Key
DMBTR TYPE DMBTR, " Amount in Local Currency
AUFNR TYPE AUFNR_NEU, " Order Number
NONFBT TYPE DMBTR, " non fbt amount
SUBFBT TYPE DMBTR, " subject to fbt amount
ZFI_FBT TYPE ZFI_FBT, " Qualifying amount.
AMOUNT TYPE DMBTR,
FBTPAY TYPE DMBTR,
ZFI_PAY TYPE ZFI_PAY,
END OF T_BSIS,
T_IT_BSIS TYPE STANDARD TABLE OF T_BSIS.
TYPES : BEGIN OF T_FRINGE,
ZFI_HKONT TYPE HKONT,
ZFI_FBT TYPE ZFI_FBT,
ZFI_PAY TYPE ZFI_PAY,
END OF T_FRINGE,
T_IT_FRINGE TYPE STANDARD TABLE OF T_FRINGE.
DATA : GIT_FRINGE TYPE T_IT_FRINGE,
GWA_FRINGE TYPE T_FRINGE.
DATA : GIT_BSIS TYPE T_IT_BSIS,
GWA_BSIS TYPE T_BSIS.
DATA : G_HKONT TYPE HKONT,
G_BUDAT TYPE BUDAT,
G_AUFNR TYPE AUFNR_NEU.
FIELD-SYMBOLS : <BSIS> TYPE T_BSIS.
DATA : G_REPID TYPE SY-REPID,
GIT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
GWA_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
GT_SORT TYPE SLIS_T_SORTINFO_ALV,
GT_EVENTS TYPE SLIS_T_EVENT,
GT_LIST_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER,
GS_LAYOUT TYPE SLIS_LAYOUT_ALV.
GS_LAYOUT-ZEBRA = 'X'.
GS_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
CONSTANTS : C_50(2) TYPE C VALUE '50'.
SELECTION SCREEN DEFINITIONS
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : P_BUKRS TYPE BUKRS DEFAULT 'H901' OBLIGATORY.
SELECT-OPTIONS : S_HKONT FOR G_HKONT,
S_BUDAT FOR G_BUDAT.
*PARAMETERS : P_AUFNR TYPE AUFNR_NEU DEFAULT '000000100001' OBLIGATORY.
SELECTION-SCREEN END OF BLOCK B1.
EVENTS
INITIALIZATION.
INITIALIZATION.
G_REPID = SY-REPID.
AT SELECTION-SCREEN
AT SELECTION-SCREEN.
PERFORM GET_ZTABLE. " get data from ZFII_FRINGE table
START-OF-SELECTION.
START-OF-SELECTION.
PERFORM GET_DATA. " get data from BSIS table
IF NOT GIT_BSIS IS INITIAL.
PERFORM GET_PERCENTAGE. " to get the percentages from table ZFII_FRINGE
PERFORM CHK4_INTERNAL. " checking for the posting key wheather th document is reversed
" and checking wheather internal order is FBT or non-FBT
ENDIF.
END-OF-SELECTION.
END-OF-SELECTION.
IF NOT GIT_BSIS IS INITIAL.
PERFORM DISPLAY. " display ALV GRID display
ENDIF.
*& Form get_data
text
--> p1 text
<-- p2 text
FORM GET_DATA .
SELECT
BUKRS
HKONT
GJAHR
BELNR
BUDAT
BLDAT
XBLNR
BSCHL
DMBTR
AUFNR FROM BSIS
INTO TABLE GIT_BSIS
WHERE BUKRS EQ P_BUKRS AND
HKONT IN S_HKONT AND
BUDAT IN S_BUDAT.
IF SY-SUBRC NE 0.
MESSAGE I000(ZFI) WITH 'No data exist'.
EXIT.
ENDIF.
ENDFORM. " get_data
*& Form display
FORM DISPLAY .
PERFORM BUILD_FIELD_CATALOUGE.
PERFORM GET_EVENTS.
PERFORM DETERMINE_SORT_SEQUENCE.
PERFORM SUB_COMMENTERY_BUILD.
PERFORM ALV_DISPLAY.
ENDFORM. " display
*& Form build_field_catalouge
FORM BUILD_FIELD_CATALOUGE.
DATA : L_POS TYPE I.
L_POS = 1 .
PERFORM INIT_FIELD_CATALOG USING GIT_FIELDCAT[] " Field Catalog
L_POS " Column Position
'HKONT' " InTab Field Name
'GIT_BSIS' " InTab Name
'10' " Output Length
'GL Account' " Column Name Text
' ' " Datatype
'X' " Key?
'1' " Row Position
' ' " Hotspot
' ' " Emphasize
' ' " key_sel
' ' " justification
' '. " Sum field?
L_POS = L_POS + 1 .
PERFORM INIT_FIELD_CATALOG USING GIT_FIELDCAT[] " Field Catalog
L_POS " Column Position
'BELNR' " InTab Field Name
'GIT_BSIS' " InTab Name
'10' " Output Length
'Document No.' " Column Name Text
' ' " Datatype
'X' " Key?
'1' " Row Position
'X' " Hotspot
' ' " Emphasize
' ' " key_sel
' ' " justification
' '. " Sum field?
L_POS = L_POS + 1 .
PERFORM INIT_FIELD_CATALOG USING GIT_FIELDCAT[] " Field Catalog
L_POS " Column Position
'BUDAT' " InTab Field Name
'GIT_BSIS' " InTab Name
'10' " Output Length
'Posting Date' " Column Name Text
' ' " Datatype
' ' " Key?
'1' " Row Position
' ' " Hotspot
' ' " Emphasize
' ' " key_sel
' ' " justification
' '. " Sum field?
L_POS = L_POS + 1 .
PERFORM INIT_FIELD_CATALOG USING GIT_FIELDCAT[] " Field Catalog
L_POS " Column Position
'BLDAT' " InTab Field Name
'GIT_BSIS' " InTab Name
'10' " Output Length
'Docu. Date' " Column Name Text
' ' " Datatype
' ' " Key?
'1' " Row Position
' ' " Hotspot
' ' " Emphasize
' ' " key_sel
' ' " justification
' '. " Sum field?
L_POS = L_POS + 1 .
PERFORM INIT_FIELD_CATALOG USING GIT_FIELDCAT[] " Field Catalog
L_POS " Column Position
'XBLNR' " InTab Field Name
'GIT_BSIS' " InTab Name
'16' " Output Length
'Ref. Doc. Number' " Column Name Text
' ' " Datatype
' ' " Key?
'1' " Row Position
' ' " Hotspot
' ' " Emphasize
' ' " key_sel
' ' " justification
'X'. " Sum field?
L_POS = L_POS + 1 .
PERFORM INIT_FIELD_CATALOG USING GIT_FIELDCAT[] " Field Catalog
L_POS " Column Position
'DMBTR' " InTab Field Name
'GIT_BSIS' " InTab Name
'16' " Output Length
'Gross Amount' " Column Name Text
' ' " Datatype
' ' " Key?
'1' " Row Position
' ' " Hotspot
' ' " Emphasize
' ' " key_sel
' ' " justification
'X'. " Sum field?
L_POS = L_POS + 1 .
PERFORM INIT_FIELD_CATALOG USING GIT_FIELDCAT[] " Field Catalog
L_POS " Column Position
'SUBFBT' " InTab Field Name
'GIT_BSIS' " InTab Name
'16' " Output Length
'FBT Amount' " Column Name Text
' ' " Datatype
' ' " Key?
'1' " Row Position
' ' " Hotspot
' ' " Emphasize
' ' " key_sel
' ' " justification
'X'. " Sum field?
L_POS = L_POS + 1 .
PERFORM INIT_FIELD_CATALOG USING GIT_FIELDCAT[] " Field Catalog
L_POS " Column Position
'NONFBT' " InTab Field Name
'GIT_BSIS' " InTab Name
'16' " Output Length
'Non FBT Amount' " Column Name Text
' ' " Datatype
' ' " Key?
'1' " Row Position
' ' " Hotspot
' ' " Emphasize
' ' " key_sel
' ' " justification
'X'. " Sum field?
L_POS = L_POS + 1 .
PERFORM INIT_FIELD_CATALOG USING GIT_FIELDCAT[] " Field Catalog
L_POS " Column Position
'ZFI_FBT' " InTab Field Name
'GIT_BSIS' " InTab Name
'12' " Output Length
'Percentage' " Column Name Text
' ' " Datatype
' ' " Key?
'1' " Row Position
' ' " Hotspot
' ' " Emphasize
' ' " key_sel
' ' " justification
' '. " Sum field?
L_POS = L_POS + 1 .
PERFORM INIT_FIELD_CATALOG USING GIT_FIELDCAT[] " Field Catalog
L_POS " Column Position
'AMOUNT' " InTab Field Name
'GIT_BSIS' " InTab Name
'16' " Output Length
'Qualifying Amount' " Column Name Text
' ' " Datatype
' ' " Key?
'1' " Row Position
' ' " Hotspot
' ' " Emphasize
' ' " key_sel
' ' " justification
'X'. " Sum field?
L_POS = L_POS + 1 .
PERFORM INIT_FIELD_CATALOG USING GIT_FIELDCAT[] " Field Catalog
L_POS " Column Position
'FBTPAY' " InTab Field Name
'GIT_BSIS' " InTab Name
'12' " Output Length
'FBT payable' " Column Name Text
' ' " Datatype
' ' " Key?
'1' " Row Position
' ' " Hotspot
' ' " Emphasize
' ' " key_sel
' ' " justification
'X'. " Sum field?
ENDFORM. " build_field_catalouge
*& Form init_field_catalog
text
FORM INIT_FIELD_CATALOG USING P_GIT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV
PV_POS LIKE GWA_FIELDCAT-COL_POS
PV_FIELDNAME LIKE GWA_FIELDCAT-FIELDNAME
PV_TABNAME LIKE GWA_FIELDCAT-TABNAME
PV_OUTPUT LIKE GWA_FIELDCAT-OUTPUTLEN
PV_SELTEXT LIKE GWA_FIELDCAT-SELTEXT_M
PV_DATATYPE LIKE GWA_FIELDCAT-DATATYPE
PV_KEY LIKE GWA_FIELDCAT-KEY
PV_ROW LIKE GWA_FIELDCAT-ROW_POS
PV_HOTSPOT LIKE GWA_FIELDCAT-HOTSPOT
PV_EMPHASIZE LIKE GWA_FIELDCAT-EMPHASIZE
PV_KEY_SEL LIKE GWA_FIELDCAT-KEY_SEL
PV_JUST LIKE GWA_FIELDCAT-JUST
PV_SUM LIKE GWA_FIELDCAT-DO_SUM.
DATA: LT_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
LT_FIELDCAT-OUTPUTLEN = PV_OUTPUT.
LT_FIELDCAT-COL_POS = PV_POS.
LT_FIELDCAT-FIELDNAME = PV_FIELDNAME.
LT_FIELDCAT-TABNAME = PV_TABNAME.
LT_FIELDCAT-SELTEXT_M = PV_SELTEXT.
LT_FIELDCAT-KEY = PV_KEY.
LT_FIELDCAT-ROW_POS = PV_ROW.
LT_FIELDCAT-HOTSPOT = PV_HOTSPOT.
LT_FIELDCAT-EMPHASIZE = PV_EMPHASIZE.
LT_FIELDCAT-KEY_SEL = PV_KEY_SEL.
LT_FIELDCAT-DO_SUM = PV_SUM.
LT_FIELDCAT-JUST = PV_JUST.
LT_FIELDCAT-DATATYPE = PV_DATATYPE.
APPEND LT_FIELDCAT TO P_GIT_FIELDCAT.
CLEAR LT_FIELDCAT.
ENDFORM. " init_field_catalog
*& Form alv_display
text
--> p1 text
<-- p2 text
FORM ALV_DISPLAY .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = G_REPID
I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
i_grid_title = 'Fringe Benefit Tax'
I_GRID_SETTINGS =
IS_LAYOUT = GS_LAYOUT
IT_FIELDCAT = GIT_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT = GT_SORT
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS = GT_EVENTS[]
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = GIT_BSIS
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " alv_display
*& Form chk4_internal
text
--> p1 text
<-- p2 text
FORM CHK4_INTERNAL .
LOOP AT GIT_BSIS ASSIGNING <BSIS>.
IF <BSIS> IS ASSIGNED.
IF <BSIS>-BSCHL = C_50.
<BSIS>-DMBTR = <BSIS>-DMBTR * -1.
ENDIF.
IF NOT <bsis>-aufnr IS INITIAL.
IF <BSIS>-AUFNR = '000000100000'. " P_AUFNR.
<BSIS>-SUBFBT = <BSIS>-DMBTR.
<BSIS>-AMOUNT = ( <BSIS>-SUBFBT * <BSIS>-ZFI_FBT ) / 100.
ELSE.
IF <bsis>-aufnr = '000000100020'.
<BSIS>-NONFBT = <BSIS>-DMBTR.
ENDIF.
ENDIF.
<BSIS>-FBTPAY = ( <BSIS>-AMOUNT * <BSIS>-ZFI_PAY ) / 100.
ENDIF.
ENDLOOP.
UNASSIGN <BSIS>.
ENDFORM. " chk4_internal
*& Form get_ztable
text
--> p1 text
<-- p2 text
FORM GET_ZTABLE .
REFRESH : GIT_FRINGE.
SELECT HKONT
ZFI_FBT
ZFI_PAY
FROM ZFI_FBT_DETL
INTO TABLE GIT_FRINGE
FOR ALL ENTRIES IN s_hkont
WHERE HKONT IN S_HKONT.
CHECK SY-SUBRC EQ 0.
SORT GIT_FRINGE BY ZFI_HKONT.
ENDFORM. " get_ztable
*& Form get_percentage
text
--> p1 text
<-- p2 text
FORM GET_PERCENTAGE .
CLEAR : GWA_FRINGE.
LOOP AT GIT_BSIS ASSIGNING <BSIS>.
IF <BSIS> IS ASSIGNED.
READ TABLE GIT_FRINGE INTO GWA_FRINGE WITH KEY
ZFI_HKONT = <BSIS>-HKONT
BINARY SEARCH.
CHECK SY-SUBRC EQ 0.
<BSIS>-ZFI_FBT = GWA_FRINGE-ZFI_FBT.
<BSIS>-ZFI_PAY = GWA_FRINGE-ZFI_PAY.
ENDIF.
ENDLOOP.
UNASSIGN <BSIS>.
ENDFORM. " get_percentage
*& Form determine_sort_sequence
text
--> p1 text
<-- p2 text
FORM DETERMINE_SORT_SEQUENCE .
DATA : LS_SORT TYPE SLIS_SORTINFO_ALV.
LS_SORT-SPOS = 1. " Sort order
LS_SORT-FIELDNAME = 'HKONT'.
LS_SORT-TABNAME = 'GIT_BSIS'.
LS_SORT-UP = 'X'.
LS_SORT-SUBTOT = 'X'. " Sub total allowed
APPEND LS_SORT TO GT_SORT.
CLEAR LS_SORT.
ENDFORM. " determine_sort_sequence
*& Form get_events
text
--> p1 text
<-- p2 text
FORM GET_EVENTS .
CONSTANTS:
GC_FORMNAME_TOP_OF_PAGE TYPE SLIS_FORMNAME VALUE 'TOP_OF_PAGE',
GC_FORMNAME_USER_COMMAND TYPE SLIS_FORMNAME VALUE 'USER_COMMAND'.
DATA: LS_EVENT TYPE SLIS_ALV_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 0
IMPORTING
ET_EVENTS = GT_EVENTS.
READ TABLE GT_EVENTS WITH KEY NAME = SLIS_EV_TOP_OF_PAGE
INTO LS_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_TOP_OF_PAGE TO LS_EVENT-FORM.
APPEND LS_EVENT TO GT_EVENTS.
ENDIF.
READ TABLE GT_EVENTS WITH KEY NAME = SLIS_EV_USER_COMMAND
INTO LS_EVENT.
IF SY-SUBRC = 0.
MOVE GC_FORMNAME_USER_COMMAND TO LS_EVENT-FORM.
APPEND LS_EVENT TO GT_EVENTS.
ENDIF.
ENDFORM. " get_events
*& Form sub_commentery_build
text
--> p1 text
<-- p2 text
FORM SUB_COMMENTERY_BUILD .
DATA: LS_LINE TYPE SLIS_LISTHEADER.
DATA : L_LOW TYPE CHAR10,
L_HIGH TYPE CHAR10,
L_DATE TYPE CHAR25.
CONCATENATE S_BUDAT-LOW6(2) '.' S_BUDAT-LOW4(2) '.' S_BUDAT-LOW+0(4) INTO L_LOW.
CONCATENATE S_BUDAT-HIGH6(2) '.' S_BUDAT-HIGH4(2) '.' S_BUDAT-HIGH+0(4) INTO L_HIGH.
CONCATENATE L_LOW ' - ' L_HIGH INTO L_DATE.
***header
CLEAR LS_LINE.
LS_LINE-TYP = 'H'.
LS_LINE-KEY: not used for this type
LS_LINE-INFO = 'Fringe Benefit Tax'.
APPEND LS_LINE TO GT_LIST_TOP_OF_PAGE.
***Selection
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-KEY = 'Company Code'.
LS_LINE-INFO = P_BUKRS.
APPEND LS_LINE TO GT_LIST_TOP_OF_PAGE.
CLEAR LS_LINE.
LS_LINE-TYP = 'S'.
LS_LINE-KEY = 'Posting Date'.
LS_LINE-INFO = L_DATE.
APPEND LS_LINE TO GT_LIST_TOP_OF_PAGE.
ENDFORM. " sub_commentery_build
FORM TOP_OF_PAGE *
When TOP-OF-PAGE will be fired , this event will be called and it
will use the contents of i_list_top_of_page for output in the header
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
i_logo = 'ENJOYSAP_LOGO'
IT_LIST_COMMENTARY = GT_LIST_TOP_OF_PAGE.
ENDFORM. "top_of_page
*& Form USER_COMMAND
Called from within the ALV processes. Currently, '&IC1' is used to
process the hotspot and display the document 'picked' by the user.
FORM USER_COMMAND USING PV_UCOMM LIKE SY-UCOMM
SELFIELD TYPE SLIS_SELFIELD.
CLEAR : GWA_BSIS.
CASE PV_UCOMM.
WHEN '&IC1'.
READ TABLE GIT_BSIS INTO GWA_BSIS INDEX SELFIELD-TABINDEX.
CASE SELFIELD-SEL_TAB_FIELD.
WHEN 'GIT_BSIS-BELNR'.
IF NOT GWA_BSIS-BELNR IS INITIAL.
SET PARAMETER ID: 'BUK' FIELD GWA_BSIS-BUKRS,
'BLN' FIELD GWA_BSIS-BELNR,
'GJR' FIELD GWA_BSIS-GJAHR.
CALL TRANSACTION 'FB03' AND SKIP FIRST SCREEN.
ENDIF.
WHEN OTHERS.
ENDCASE.
WHEN OTHERS.
ENDCASE.
CLEAR : GWA_BSIS.
ENDFORM. "user_command
*& Form SET_PF_STATUS
text
FORM SET_PF_STATUS USING EXTAB TYPE SLIS_T_EXTAB.
SET PF-STATUS 'STANDARD_FULLSCREEN' OF PROGRAM 'SAPLKKBL'.
ENDFORM. "SET_PF_STATUSENDFORM. "SET_PF_STATUS
AWARD POINTS IF USEFUL.... -
How to trigger MDM Workflow from ABAP Program.
HI
I have requriment to trigger MDM Workflow(Design in MDM) from My Module pool program. Suggest how to do it?
Thanks in Advance.
Regards,
Shyam Babu Sah.Hi,
This question is for forum SAP Netweaver --> Workflow. There are functions and programmes that SAP delivers for this.
[Example here|Re: How can I trigger workflow from my report] -
How java communicate with c++ (experts please take a look)
I encounter problems in my new project.
My client uses websphere as their app server and put ejb on it. They are now trying to introduce an image server on another machine to deal with image processing function. The image server provides some visual c++ lib calls and functions for programmer to work for, but it doesn't support java. So my client now asking me to write some java package for the websphere which hidden all c++'s works and call the image server to work(the 2 servers is distributed).
I start investigation from JNI at first. however, I found that JNI needs customizes the C++ code and of course i won't have it. So I give up this. Then, I start thinking to put a layer on the C++, and then use JNI to deal with this c++ layer. These steps I think should be on image server. So the next step is use RMI or Corba to communicate the websphere and image server, right??
I dont know whether this can be work or not, but I feel its to complex. I then think whether I can directly access the c++ file on the image server if I just know the image server's dll or function. I even dont know whether the image server have COM or support corba...
Can expertists give me some suggestions or reference!?
Thx a lots!!So many topics.
Someone has suggested 'swig' in the past. (That is not the same as swing). It produces a interface layer (java) from another layer (like C++.) The url is http://www.swig.org/.
You need to provide a communication layer. You can either use RMI or sockets. I wouldn't suggest corba unless you are already familar with it and have a server.
JNI use C as the inteface layer not C++. You can use the standard tricks to use C++. The JNI javah stuff already supports this as it supplies macros which resolve to extern "C" declarations. If that doesn't mean anything to you then just ignore it. But keep in mind that C++ methods can NOT be used as native methods, although they can be used by those methods. -
XI Error when transfering invoice from MM - XI - SRM.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Call Inbound Proxy
-->
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
- <!-- ************************************
-->
<Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=receiver</Trace>
<Trace level="1" type="T">COMMIT is done by XMB !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="1" type="T">system-ID = SRM</Trace>
<Trace level="1" type="T">client = 100</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = DEV01</Trace>
<Trace level="1" type="Timestamp">2007-11-05T15:02:42Z INDIA</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- <!-- ************************************
-->
<Trace level="1" type="T">Message-GUID = 472D3D926B8A3FE0E10000000AC83163</Trace>
<Trace level="1" type="T">PLNAME = RECEIVER</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- <!-- ************************************
-->
<Trace level="1" type="T">Get definition of external pipeline = RECEIVER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Get definition of internal pipeline = SAP_RECEIVER</Trace>
<Trace level="1" type="T">Queue name : XBTR0002</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTR0002</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!-- ************************************
-->
<Trace level="1" type="T">--start sender interface action determination</Trace>
<Trace level="1" type="T">select interface *</Trace>
<Trace level="1" type="T">select interface namespace</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--start receiver interface action determination</Trace>
<Trace level="1" type="T">Loop 0000000001</Trace>
<Trace level="1" type="T">select interface InvoiceRequest_In*</Trace>
<Trace level="1" type="T">select interface namespace http://sap.com/xi/SRM/SupplierEnablement/Global</Trace>
<Trace level="1" type="T">no interface found</Trace>
<Trace level="1" type="T">--no sender or receiver interface definition found</Trace>
<Trace level="1" type="T">Hence set action to DEL</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- <!-- ************************************
-->
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline RECEIVER</Trace>
<Trace level="1" type="T">system-ID = SRM</Trace>
<Trace level="1" type="T">client = 100</Trace>
<Trace level="1" type="T">language = E</Trace>
<Trace level="1" type="T">user = DEV01</Trace>
<Trace level="1" type="Timestamp">2007-11-05T15:02:42Z INDIA</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- <!-- ************************************
-->
<Trace level="1" type="T">Get definition of external pipeline RECEIVER</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
<Trace level="1" type="T">Corresponding internal pipeline SAP_RECEIVER</Trace>
<Trace level="1" type="B" name="PLSRV_CALL_INBOUND_PROXY" />
- <!-- ************************************
-->
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="Inbound Framework" />
- <!-- ************************************
-->
- <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
- <asx:values>
<CX_ERROR href="#o91" />
</asx:values>
- <asx:heap xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:abap="http://www.sap.com/abapxml/types/built-in" xmlns:cls="http://www.sap.com/abapxml/classes/global" xmlns:dic="http://www.sap.com/abapxml/types/dictionary">
- <cls:CX_SY_NO_HANDLER id="o91">
- <CX_ROOT>
<TEXTID>1F09B73915F6B645E10000000A11447B</TEXTID>
<PREVIOUS href="#o90" />
<KERNEL_ERRID>UNCAUGHT_EXCEPTION</KERNEL_ERRID>
- <INTERNAL_SOURCE_POS>
<PROGID>340</PROGID>
<CONTID>3133</CONTID>
</INTERNAL_SOURCE_POS>
</CX_ROOT>
<CX_NO_CHECK />
- <CX_SY_NO_HANDLER>
<CLASSNAME>CX_BBPX1_STD_MESSAGE_FAULT</CLASSNAME>
</CX_SY_NO_HANDLER>
</cls:CX_SY_NO_HANDLER>
- <cls:CX_BBPX1_STD_MESSAGE_FAULT id="o90">
- <CX_ROOT>
<TEXTID>65B8FEB5F43CC949B7CD662AB888ED34</TEXTID>
<PREVIOUS />
<KERNEL_ERRID />
- <INTERNAL_SOURCE_POS>
<PROGID>340</PROGID>
<CONTID>3369</CONTID>
</INTERNAL_SOURCE_POS>
</CX_ROOT>
<CX_DYNAMIC_CHECK />
<CX_AI_APPLICATION_FAULT />
- <CX_BBPX1_STD_MESSAGE_FAULT>
<AUTOMATIC_RETRY />
<CONTROLLER />
<NO_RETRY />
- <STANDARD>
<CONTROLLER />
<FAULT_TEXT>An error occured within an XI interface: Function call failed; could not find the function BBP_PD_SUSIV_GETLIST Programm: SAPLBBP_BD_DRIVER_SAPXML1; Include: LBBP_BD_DRIVER_SAPXML1U20; Line: 63</FAULT_TEXT>
<FAULT_URL />
<FAULT_DETAIL />
</STANDARD>
</CX_BBPX1_STD_MESSAGE_FAULT>
</cls:CX_BBPX1_STD_MESSAGE_FAULT>
</asx:heap>
</asx:abap>
</Trace>
<Trace level="1" type="T">System Error at Receiver... => ROLLBACK WORK</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
<Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!-- ************************************
-->
</SAP:Trace>Hi,
We have configured the SAP for Plan Driven Procurement. We have SRM 5.5 version installed along with XI 7.0 and MM 4.7.
The scenario is to send the invoice from MM to SUS (SRM) via XI. We have created a ZNAST program to send the invoice from MM to SUS via XI. The invoice is moving from MM to XI and XI to SUS where it fails due to this error.
We have used OOTB scenarios and have not done any customizations as well. -
Quick Viewer share to all users
Hi,
I have 2 questions on Quick Viewer.
1. How can I access other people developed query? I cant access even though it has been developed by some other person.
2. How can I share the access with others if the query is not intended to access public?
>> From quick viewer as starting point ...
Thanks.
Marks will be rewarded.@1: - go to transaction SQ02 -> Settings: tick the checkbox DISPLAY SYSTEM OBJECTS
- then go back to SQ01, now you have in the STANDARD AREA user groups with the quickviews of
each user
@2: use in SQVI the menu quickview -> additioal functions-> generate programm and display program name and make a transaktion out of the generated program
regards
Markus
award some points if useful -
Preview Application Resizing Problem
Preview Application Resizing Problem
Microsoft platforms have two significant advantages. The first is the concept of an operating system that can function with hardware that ranges from cellular phones to desktop computers. The second is that Microsoft has excellent software development tools
for creating and testing computer programs.
Software compatibility across hardware platforms requires not only meeting CPU and memory requirements. Application programs must be able to automatically adjust Window and control sizes to meet the needs of available window sizes, video display unit sizes
and screen resolutions, switching between vertical and horizontal viewing, vertical and horizontal scrolling, changes in font sizes , and variations in the available screen space due to usage of vertical and horizontal toolbars.
Software developers must be careful that resizing doesn’t squeeze controls too close together or make them so small that they cannot be finger or stylus selected when used with touch screens.
Some of the required automatic resizing options are provided by the Microsoft software compilers and the Windows operating system. Softgroup Component’s “.NET Forms Resize” is an example of one of the third party applications that provide advanced
resizing functionality.
Many of the resizing functions are programmer options and, if not properly enabled, an application may not have the required resizing functionality. At the current state of the art, application programs are highly variable in their capability to do the “intelligent
resizing” that is required to handle different display environments.
A case in point is the Microsoft Preview Application for Windows 10. When entering lengthy comments, the send button becomes positioned off the end of the program window. It is possible to scroll to the button, but the display automatically resets when scroll
is released. The result is that the text cannot be sent. You can try a "blind" TAB to the SEND button. This appeared to work after several tries, but the comment was apparently not received,
RERThirdHi,
What do you see when you open the same PDF file in Acrobat Reader? Are the words still squeezed than?
Dimaxum
Maybe you are looking for
-
No Display on HDTV using Mini Display Port to HDMI Cable
Hi, I have a Mini diplay port to HDMI cable Male to male cable. I am trying to connect my Macbook Pro running OS 10.6.4 to my LG 32inch HDTV and cannot get display onto the HDTV. The screen just blinks for a bit but still no luck. I have searched a n
-
Using libraries as part of a script to execut jre
I am attempting to run a project that contains the commons-net-ftp-20.jar. I am able to execute the project successfully from netbeans. I am able to execute the project successfully by placing commons-net-ftp-20 in the ext library of the jre. When I
-
I am creating a project in FCP and I have imported a psd. file to fade in and out at the beginning and end. My sequence settings have a frame size of 320x240 and my graphic file is created in the same resolution in Photoshop before I import it. The g
-
SbRIO Hangs after a random Time !!
Dear All I hope my message finds u well I am working on a project based on a sbRIO 9641 with an SD C series NI 9802 Module used to securely log data to it the point is that the sbRIO is used to control a Temperature/Humidity chamber by it's Industria
-
Java access to wifi signal of any mobile devices
hi developers...! I wonder if, there's a possibility for java to get the wifi signal and also...to insert some data into the wifi signal broadcasting.....? so then we just making something embedded into the signal. but after couple months... i found