Run a RFC from the UNIX level to test if its up.

We have some RFC's that must run from specfic servers, I would like to setup a UNIX script to test and see if those are up,   I would like it to just work like pushing the test connection in SM59,   Is there a command to do it?

Hi,
Please find a interesting code , i used to check my server connection. may this will help you.
http://www.saptechies.com/check-if-your-sap-servers-are-alive-from-the-command-prompt-2/
a®

Similar Messages

  • Running Mac apps from the Unix command line

    I hope I don't offend Mac lovers with this question, but as a total Mac newbie, I find Finder cumbersome. This may change as I learn all the features and keyboard shortcuts. but I don't think so. I've been playing with computers for 40 years and Unix for 30 and I know what I like. I like a command line interface, and prefer to avoid the point and squint interface to the extent possible.
    I'd prefer to run everything from the shell, and not finder. So to run safari, I'd like to do something intuitive (to me, at least) like type ...
    bash# safari
    ... instead of marching around in Finder or using the dock and the mouse.
    Can any of you Mac hackers give an old Unix hacker a pointer to a clue?

    Yes, I'm way too cheap to buy the book. I can't imagine how much I've saved over the years, always being way too cheap to buy the book. Easily enough to pay for the spiffy new computer.
    No Windoze experience? You may think you do, but really, you don't know how lucky you are. My Vaxen ran 4.1 BSD though 4.3 BSD. I've played with a lot of flavors of unix. My favorite flavor in recent years has been FreeBSD, so I began paying close attention to the Mac since OS X.
    X11 and Xcode were the first things I installed. I've been poking around, reading the docs, and getting a better handle on it all. I've only scratched the surface of the stuff on your pages, and it's been most helpful. There's good stuff there for unix newbies too.
    If it were not for Jerry Garcia, I probably never would have had the stones to open my mouth in front of a microphone.

  • Unable to run reports from the unix command line

    hi
    all of a sudden i am unable to run reports ( on App server 10g) either from the unix scripts or from the unix command line. But i can run them from the forms.
    Any one have any idead about this.
    Thank you

    thanks all for replying
    i have set the env variables for the session and it worked. Looks like i have to set the oracle_home and ld_library_path every time ( opening a new putty session) i call sqlldr.
    But in a whole i am trying to run sql loader from the forms. Right now we have Oracle app server 10g which forms 10g version. As oracle app server 10g didnt come with sqlldr, we are copied the sqlldr of database on to app server with different home. after this we can run sqlldr ( on app server ) from unix scripts but not from Forms. Then we opened a qurey with oracle about app server 10g not commig with sqlldr and its remedy . But they said that they dont have specific remedy for that and suggested the same what we did.
    So we came up with java package which does the same funtion as host command and trying to run sqlldr which is on the database( ie replacing the host command in the forms with the database funtion). By using that funtion i am able to run the sqlldr from sql plus but not from forms. I couldnt easily debug it as i wont through any error messages.
    Any one have any idea of this ...
    Thank you

  • Running Shell scripts from the desktop

    Hi,
    I'm from the UNIX world rather than the mac one so have written a number of shell scripts. Lets call them foo.sh and bar.bash for the sake of argument.
    These are sitting in a folder on my desktop
    I can happily open a terminal session and run the scripts - and they work as I expect them to.
    If I open a Finder window and double click on the icons for the scripts what happens is that it opens TextEdit.
    Theres two things I'd like to change
    A. I'd like to change the behaviour so that the scripts run when I double clike them rather than opening an editor (possibly in a terminal window )
    B. I'd like to be able to change the editor from TextEdit to one I'm more used to...(I've installed Vim/Gvim which I quite like).
    A. - Haven't managed to get anywhere trying to solve this....
    B. - So far my attempts have got as far as...
    1...
    right-click -> open with -> Other -> select vim.app
    tick Always open as
    click open
    The file then opens in a vim window.
    however if I now close the vim application and double clike the file icon then the file opens in TextEdit again
    2...
    Right Click -> Get Info -> Open with VIM -> add -> Change all
    message appears
    'Are you sure you want to change all your Vimm.app documents to open with the application "vim.app"
    This change will apply to all Vim.app documents with extension ".sh" '
    click continue
    In the Info pane the 'Open with' selection widget immediately changes to say 'Open with: TextEdit.app'
    So I'm a bit stumped, can you help!
    Regards
    Mark
    Mac Mini   Mac OS X (10.4.3)  

    Thanks to both people who answered.
    You both gave me useful workarounds to my problem.
    Renaming the scripts to be 'foo.command' was very hepful and useful to know. I tried this and it does indeed work. I may use this in the future.
    I also had a play around with applescript and the automator to achieve similar results.
    I agree that double clicking to run the file and also edit it is mutually exlcusive - I'm sort of trying to work out how I could make it do 'either/or' as I choose. In the Windows world i'd have the option of setting 'open' to run the script (assuming I'd got cygwin installed and had assiciated it) OR 'Edit with vim' if I wanted to edit the file (assuming vim was installed!).
    Unresolved issue is that I'm still unable to get VIM to be associated with a .sh file.
    The way I would envisage it working in Mac world would be to be able to right click on foo.sh -> Open with... and have a list to select from immediately there like..
    Text Edit
    Vim
    Terminal (default)
    and be able to somehow add and remove apps from the list and change which is the default.
    My issue is that I don't seem to know how to get other apps than TextEdit to appear in the list - I suspect I need a better understanding of how these file/application associations work and are configured.
    Regards
    Mark

  • How can I import eex files into Applications EUL from the unix command line

    How can I import *.eex and *.dis files into an Applications EUL from the unix command line?
    Thanks

    Hi
    The simple answer is you either have to use the client tool DIS51ADM to import files using the command line (Discoverer Admin is a windows only client tool), or the Java command line which needs a browser.
    In theory if you have a browser running on your Unix box you may be able to use the Java command line to make this work.
    Best wishes
    Michael

  • Script needed to generate a list of paragraph and character styles from the Book Level

    Hello,
    I am using FrameMaker 11 in the Adobe Technical Communication Suite 4 and I need to find a script that will generate a list
    of paragraph and character styles from the book level.
    I am working with unstructured FrameMaker books, but will soon be looking at getting a conversion table developed
    that will allow me to migrate all my data over to Dita (1.1 for now).
    Any thoughts, ideas on this is very much appreciated.
    Regards,
    Jim

    Hi Jim,
    I think the problem you are having with getting a response is that you are asking someone to write a script for you. Normally, you would have to pay someone for this, as it is something that folks do for a living.
    Nonetheless, I had a few minutes to spare, so I worked up the following script that I believe does the job. It is very slow, clunky, and totally non-elegant, but I think it works. It leverages the book error log mechanism which is built in and accessible by scripts, but is spendidly unattractive. I hope this gives you a starting point. It could be made much more beautiful, of course, but such would take lots more time.
    Russ
    ListAllFormatsInBook()
    function ListAllFormatsInBook()
        var doc, path, fmt;
        var book = app.ActiveBook;
        if(!book.ObjectValid()) book = app.FirstOpenBook;
        if(!book.ObjectValid())
            alert("No book window is active. Cannot continue.");
            return;
        CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
        CallErrorLog(book, 0, 0, "** Book format report for:");
        CallErrorLog(book, 0, 0, book.Name);
        var comp = book.FirstComponentInBook;
        while(comp.ObjectValid())
            path = comp.Name;
            doc = SimpleOpen (path, false);
            if(doc.ObjectValid())
                CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
                CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
                CallErrorLog(book, doc, 0, "");
                CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
                CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
                CallErrorLog(book, 0, 0, "Paragraph formats:");
                fmt = doc.FirstPgfFmtInDoc;
                while(fmt.ObjectValid())
                    CallErrorLog(book, 0, 0, "  - " + fmt.Name);
                    fmt = fmt.NextPgfFmtInDoc;
                CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
                CallErrorLog(book, 0, 0, "Character formats:");
                fmt = doc.FirstCharFmtInDoc;
                while(fmt.ObjectValid())
                    CallErrorLog(book, 0, 0, "  - " + fmt.Name);
                    fmt = fmt.NextCharFmtInDoc;
            else
                CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
                CallErrorLog(book, 0, 0, "!!!  Could not open: " + comp.Name + " !!!");
                CallErrorLog(book, 0, 0, "-----------------------------------------------------------");
            comp = comp.NextComponentInBook;
    function CallErrorLog(book, doc, object, text)
        var arg;
        arg = "log ";
        if(book == null || book == 0 || !book.ObjectValid())
            arg += "-b=0 ";
        else arg += "-b=" + book.id + " ";
        if(doc == null || doc == 0 || !doc.ObjectValid())
            arg += "-d=0 ";
        else arg += "-d=" + doc.id + " ";
        if(object == null || object == 0 || !object.ObjectValid())
            arg += "-O=0 ";
        else arg += "-O=" + object.id + " ";
        arg += "--" + text;
        CallClient("BookErrorLog", arg);

  • Is it possible to run process chain from the certain process/point?

    Hello
    Is it possible to run process chain from the certain process?
    How?
    Thanks

    Hello,
    yes it possible! use the following steps.
    1. Goto the process which you want the chain to start from.Goto display messages>> Chain tab. In the generated instance note the variant and instance.
    2. Goto table RSPROCESSLOG and give variant and instance and get logid details.
    3. t codese37>> run FM RSPROCESSFINISH.
    4. give the deatils u have got in RSPROCESSLOG table here and say execute.
    This will solve ur problem.
    Hope this helps!
    Reg
    Deepmala

  • How to Block the material Item from the Po level?

    Hi,
    Is it possible to block the item stock from the PO level?
    Currently client request to block the material on certain good receipt only, that's why they want to control in the PO.
    With the field stock type in PO defaulted to Unrestricted is good for them as they only need to change the stock type to block if they found out that that particular item need to be blocked.
    The problem that i'm facing now is the stock type in PO is for display only, but when i check in OMF4, Quality Inspection, it was set as opt. Entry. Is there other places that i still need to change?
    Beside change the stock type in PO, is there any other work around? For example, such as can we set a message pop up from the item text in the PO indicate that this item should be recieve as block stock when the store personnel do the GR or other work around?
    Thanks!

    hi
    as per ur requriments certain goods receipts only go for block stock.
    for that in that purchase orders w r t line items take stock type as a block stock.
    if u want to restrict the material no purchasing at different u can select Xplant material status in material purchasing view or material type level oms2.
    regards
    sap mm

  • Firefox won't insall into my applications folder. Says can't install because libsmime3.dylib is in use. I am running Mac Os 10.6.7 on a Macbook Pro. I can run firefox okay from the disk image but just won't install into the apps folder.

    My system is a Macbook Pro running Mac Os 10.6.7 with a 2.8 GHz Intel Core 2 duo processor with 4 GB 1067 MHz DDR3 ram. The upgrade downloads fine, but when I try to drag the firefox image onto my appication folder, I get a dialogue box that says...Cannot install application because "libsmime3.dylib" is in use. I can run Firefox fine from the disk image.

    Nope---didn't work. I've owned Macs for about 12 years so although I am brain dead on some things, I do have a working knowledge on most things. I only say that to say this--I did try holding down the mouse and choosing empty trash. It asks if I want to permanently delete what's in there. I say yes--and then I get the same identical message again-----'The operation can't be completed because the item "Firefox 8.0.1.dmg" is in use I can then click stop, or continue.' So apparently that complains the same way it does if I click it up on the menu :)))
    As for item owned by---that's not an issue and isn't coming up. User is not a problem either as I am the only user on this system. There is only ONE file in my trash at the moment at that is this dmg file. Nothing Mac. Nothing owned by anyone other than Firefox. The problem seems to be that the dmg file and the original 4.0 FF file are working in tandem with each other--even though I have already drug the new 8.0 globe into the Apps folder and it updated the FF app with the new stuff. If I could force the dmg file to go away, I would do so, but at every turn the system is telling me it can't be done because it seems to think that dmg file is in use---even though everything is shut down and/or ejected. Hey--I'm getting ready to head out and won't be back till evening. I'll check back in this evening. Thank you again for your help.

  • How to remove the worksets from the Top level navigation for the ESS role.

    Hi All,
    I am working on enabling and disabling certain services in the ESS worksets.
    we are using EP 7.0, ECC 6.0 (NW2004s).
    When I login as a user with ESS role, I can view the changes in the overview pages. However, the worksets are still visible in the TOP Level navigation of th poral. can anyone please explain me how to remove the workset from the Top level navigation.
    Thanks for your help
    Regards
    SM

    Hi,
    Go to the ESS role via Content Admin, then double click the workset (or page or iview) and in the drop down select navigation. Then click the <i>Yes</i> radio button of the "<i>Invisible in Navigation</i>" property.

  • Can XI as a middleware drive the content from the Application level

    Can XI as a middleware drive the content from the Application level (backend) into the front-end Portal?  By XI connectors?  Is there a documentation that explains that?

    You can't plug an iPod into an iPad in order to access its media, and as far as I am aware you can only use home sharing between a computer and an iOS device (iPad, iPhone, iPod Touch, but not an iPod Classic), and not between 2 iOS devices : http://support.apple.com/kb/HT4557 and http://www.apple.com/support/homesharing/

  • Running class files from the windows command line...

    Hello Everyone,
    My instructor showed us a way to run class files from the windows command line. However every time I try to run the class file from the command line using a command like: java CruiseHelper.class
    I get an error that states "Exception in thread "main" java.lang.NoClassDefFoundError: CruiseHelper/class"

    Hello Everyone,
    My instructor showed us a way to run class files from
    the windows command line. However every time I try
    to run the class file from the command line using a
    command like: java CruiseHelper.class
    I get an error that states "Exception in thread
    "main" java.lang.NoClassDefFoundError:
    CruiseHelper/class"Classes are not file names. You don't have a class named "CruiseHelper.class", that's a file name. The class name is just CruiseHelper (if you have no package statement in it).
    So,
    java -classpath . CruiseHelper

  • Running a jar from the command line

    I am trying to run a Jar from the command line. I have a number of classes in a package called "trainnn".
    I put all the classes into a jar
    jar cvf name.jar trainnn\*.classI then creat a file called mainClass.txt with the line (with a blank return line after it, where QueryMatch has the main). This file was placed in the same directory as the package and the jar file
    Main-Class: QueryMatch
    then
    jar cmf mainClass.txt network.jar G:/TrainNN/src/trainnn/QueryMatch.classthis worked fine.....but it is from here I have problems when I try run the jar
    java -jar network.jarbut get this error.
    Exception in thread "main" java.lang.NoClassDefFoundError: QueryMatch
    I cant figure out this error, I have tried specifying the exact path in the mainClass.txt file but that didnt work.
    Any ideas
    Thanks in advance.

    Hi,
    To start a java app in the command line with "java -jar yourJarFile.jar", the jar needs to have a mainfest file "MANIFEST.MF" in a folder called "META-INF". The manifest file would have to contain the name of your starting class, e.g. it could look like thisManifest-Version: 1.0
    Main-Class: com.yourCompany.yourProject.YourClass Hope that helps. Cheers, HJK

  • The Java load in database SID / hostname has not been configured yet. You cannot run an installation from the System Copy folder with this load

    Dear Gurus,
    We are facing the below issue when performing a homogeneous system copy of NW 7.0 system using backup/restore method for DB6 system.
    The Java load in database <SID>/<hostname> has not been configured yet. You cannot run an installation from the System Copy folder with this load.
    We went through the SAP Note http://service.sap.com/sap/support/notes/2049842, and followed the same but no luck.
    We updated the Kernel to the latest, but still no luck.
    Request for your quick help as we have to complete it by EOD today.
    Thanks a lot in advance.
    Best Regards,
    Anuj

    Hello Ashutosh ,
    Thanks for your reply.
    We have gone followed the below sequence:
    SCS Installation
    Database Instance Installation using backup/restore method
    CI installation. -> getting error, when we provide the Java Components DVD.
    Best Regards,
    Anuj

  • How can i run application client from the command prompt ?

    Hi,
    I'm new to java & EJB. so can any body tell me the command to run the application client from the command prompt. Here is the code to print hello world:
    /* Remote interface */
    public interface Hello extends javax.ejb.EJBObject
         public String hello() throws      java.rmi.RemoteException;
    /* Home interface */
    public interface HelloHome extends javax.ejb.EJBHome
         Hello create() throws java.rmi.RemoteException, javax.ejb.CreateException;
    /* Stateless session bean class */
    public class HelloBean implements javax.ejb.SessionBean
         private javax.ejb.SessionContext ctx;
         public void ejbCreate(){
              System.out.println("ejbcreate()");
         public void ejbRemove(){
              System.out.println("ejbRemove()");
         public void ejbActivate(){
              System.out.println("ejbActivate()");
         public void ejbPassivate(){
              System.out.println("ejbejbPassivate()");
         public void setSessionContext(javax.ejb.SessionContext ctx){
              this.ctx=ctx;
         public String hello(){
              System.out.println("hello()");
              return "Hello, world!";
    /*Client class */
    import javax.naming.Context;
    import javax.naming.InitialContext;
    import java.util.Properties;
    public class HelloClient
         public static void main(String[] args) throws Exception{
              Properties props=System.getProperties();
              Context ctx=new InitialContext(props);
              Object obj=ctx.lookup("HelloHome");
              HelloHome home=(HelloHome)javax.rmi.PortableRemoteObject.narrow(obj,HelloHome.class);
              Hello hello=home.create();
              System.out.println(hello.hello());
              hello.remove();
    I have stored .java files in c:\ejb
    I have successfully created the .class files using javac command in the following directory :
    c:\ejb
    I have also created Helloworld.ear file in c:\ejb using sun application server which contains the following files:
    ejb-jar-ic.jar
    app-client-ic.jar
    sun-j2ee-ri.project
    application.xml
    sun-application.xml
    Manifest.mf
    But the problem is that i'm not able to run the HelloWorld.class file successfully from the command prompt. So please suggest me the comand.
    Thanx in advance.
    Best regards,
    Pankaj

    Hi
    You can run this code from the command prompt in the same way as you run any other simple java program. The only thing is you need to set the Home and Local interfaces in the classpath.And obviously if u had deployed the bean in ur app server container, then its all over.
    And one more thing is that u need to set the provider URL in the InitialContext created in the client program.
    Thanks
    Arun B

Maybe you are looking for