Run DB Verify and has some files corrupt. Need help

In our system, after we run the DB Verify and two data files have the following message:
Page 254582 is marked media corrupt
Page 254583 is marked software corrupt
Page 254584 is marked software corrupt
Page 254585 is marked software corrupt
Page 254586 is marked software corrupt
Page 254587 is marked software corrupt
A few questions:
What is the difference between the 'media corrupt'and 'software corrupt'?
How to verify if the data is really corrupted or not?
If is corrupted, is possible to repair it?
How to recover from this?
In general, what are the procedures after finding files are currupted?
Thanks for advises.

While I think that Mylenium and Dec9 have solved your problem with installation, here is a CHECKLIST on installing most Adobe programs, that might also help.
Good luck,
Hunt

Similar Messages

  • URGENT Bridge and cache error photo corrupted NEED HELP

    We were going to edit a photo and upon opening it and error came up and said: "edit bridge encountered a problem and is unable to read the cache. please try purging the central cache in cache peferences to correct situation"
    We solved the cache problem by purging it but the photo is corrupted! Furthermore, the photo turned red and 1/3 of the photo has been mysteriously turned black!  It only briefly returns to normal after cache problem in adobe bridge. It turns normal but only for a split second!!! WE NEED THIS PHOTO RESTORED TO ORIGINAL CONDITION BEFORE THE CACHE ERROR.
    Thank you for help

    Your photo may be lost, I'm sorry to say.
    Check your Windows System Event log and look for disk errors.  Disks do fail, and if there have been unrecoverable errors you'll see them in the event log.
    A failing disk is not something to be left alone.  I hope you have a recent backup - if not, make one right away, then replace any failing disk drive ASAP, or you chance losing more data.  I always recommend high-reliability enterprise class disk drives such as Western Digital RE4.  They're not that much more expensive, and lost data can be worth a lot.
    -Noel

  • Canon 5D Mark II .mov file corrupt Need help

    I have one file captured during a video session that I cannot copy, edit without locking the entire computer and having to hard start the machine. I need this file to finish editing a job. All the other files from this session work flawlessly with this one exception. Any help would be greatly appreciated. Cant cut, paste, delete, save as, export, any function without crashing. When I try to export or save as it stops at a certain point and freezes the maching. Export not responding, save as not responding. Then I have to restart

    It is because your 5D Mark II files are sRAW images, not raw. (The full 5D Mark II raw files are usually over 20 MB, not ~8 MB.) When you process sRAW files into DNG files, the DNG files are stored in the "linear DNG" format, which is much bigger than the sRAW format.
    p.s., these questions should be directed to the Camera Raw, Lightroom, or DNG forums in the future to get a faster reply.

  • How to record who run a runbook and with some parameters?

    Hello,
    I would like to record who run the runbook and with some parameters.
    There is some option build in at Orchestrator that will give me that info?
    Thanks!

    Hi,
    Logging is not really the best Choice, like Stefan mentioned, SQL Database will grow very fast.
    For the Input Parameters, you can add a Textfile Activity to write your own Lofgile.
    To get the User, which has startet teh Runbook, you Need to query the SQL Server, but i created a Runbook for that, so you Need to Invoke my Runbook in your Runbook, and you will receive the User which started the Runbook
    RB can be found here:
    https://gallery.technet.microsoft.com/Get-User-Informations-c3e64d6e
    Seidl Michael | http://www.techguy.at | twitter.com/techguyat |
    facebook.com/techguyat |
    youtube.com/techguyat

  • I bought a mac 2 days ago and transferred some files on there using migration assist which I did not want to. How do I restore my imac to factory settings so I can start again?

    I bought a mac 2 days ago and transferred some files on there using migration assist which I did not want to. How do I restore my imac to factory settings so I can start again?

    Look in /Users folder. You can go to System Preferences > Users & Groups, open the lock and "-" delete the account it created.
    This is a problem whenever you use migration assistant after the initial install. The proper way to run Migration Assistant is in Setup Assistant when you first boot your Mac. I don't know why Apple isn't clearer about this issue.

  • Is it possible to fix my mini ipad?it has cracked monitor.and has some scratches on its edges.thank you..

    is it possible to fix my mini ipad?it has cracked monitor.and has some scratches on its edges.thank you..

    You'd have to either take this to your local Apple Store or contact them via email to see what can be done and how much it will be to resolve.
    Regards,
    Steve

  • "Some files that need to be updadted are currently in use."

    I have Windows Vista, and iTunes has not been working on my computer for a few months now. I was hoping this new version (7.4 the latest one) would finally be able to run. Unfortunately, when I run the installer, I get a window that says this:
    "Some files that need to be updated are currently in use."
    "The following applications are using files that need to be updated by the installer. Close these applications and click Retry to continue"
    "Windows Explorer (Process ID: 2440)"
    How should I deal with this? And what if I still get the "iTunes has stopped working" message if I do manage to install it? Thanks for trying to help!

    Sorry to bump up an old thred.
    I too ran into the same error. It was the vagueness of the error message which surprised me.
    What I used Unlocker [http://ccollomb.free.fr/unlocker/] on the folder "C:\Program Files\Adobe\Reader 9.0", it showed some 6 to 7 files in use by the Windows Search Indexer.
    I unlocked all the files and was able to update Adobe Reader.

  • 9.2.0 Upgrade (CPSID_50026) "Files in Use" - "Some files that need to be updated are currently in use" "Program Manager"

    I have no other applications open, when I try to update with 9.2.0, but I receive subject error message.  Task Manager shows NO Image Name called "Program Manager".  There is nothing else running, that is obvious to shut down.  Any suggestions, Please?
    rick

    Have these posted suggestions worked for anyone?  I have been using the same installation files on several different machines.  Most machines upgrade just fine but, I have a few that receive this error and I cannot seem to get past it:  "Some files that need to be updated are currently in use"  "Program Manager" is the program that the installer is complaining about.  Does anyone know what program "Program Manager" is?  I'm assuming it is an Adobe file but, why would it interfere with one of my installations and not all of them?
    I'm using the same installation files for all installs so, I don't believe that it could be my downloaded installation setup files.
    Thanks so much in advance for your assistance --

  • I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

    I got new hard driver for my MacBook I don't have the cd but I do have flash drive that has the software I need help because when I turn on my laptop it shows me a file with question mark how can I install the software from the flash driver?

    Hold down the Option key while you boot your Mac. Then, it should show you a selection of devices. Click your flash drive and it will boot from that.

  • TS1717 This article is vague and unhelpful. My iTunes needs help from a pro. I have over 120,000 songs -- NO movies, TV, radio, or books... I have other programs which efficiently run things which are not audio-based. So why can I not get iTunes working w

    This article is vague and unhelpful. My iTunes needs help from a pro.
    I have over 120,000 songs -- NO movies, TV, radio, or books...
    I have other programs which efficiently run things which are not audio-based.
    So why can I not get iTunes working well?? It now takes at least 10 secs for any operation to be completed!
    That is just plain evil. But I am sure I could do something to help.
    All the music is on an 2T external drive.

    TS1717 as noted in the thread title...
    Brigancook, is the library database on the external or just the media? iTunes reevaluates smart playlists and rewrites its database after every action on the library. I've found this can make a library half that size, with a lot of smart playlists, quite sluggish. That said I'm aware part of my problem is aging hardware. Having the database on the internal drive may improve performance if it is currently on the external.
    I'd expect to see an exponential relationship between size and response time which may explain what you see. Cutting down on the number of smart playlists might help. If we're really lucky the long awaited iTunes 11 might have streamlined some of the background processes as well as cleaning up the front end.
    tt2

  • My apple id is not working on my ipad mini not allowing me to download ios7 and use some apps that need internet

    my apple id is not working on my ipad mini not allowing me to download ios7 and use some apps that need internet

    You change the name of your ID at https://appleid.apple.com.  See http://support.apple.com/kb/HE40.

  • I taked this through with a mac support agent, but forgot the method, As my Opticle drive fefuses to burn a full ML dvd   Re setting be re starting and pressing some keys, Can you help?

    I taked this through with a mac support agent, but forgot the method, As my Opticle drive fefuses to burn a full ML dvd
    Re setting be re starting and pressing some keys, Can you help?

    I taked this through with a mac support agent, but forgot the method, As my Opticle drive fefuses to burn a full ML dvd
    Re setting be re starting and pressing some keys, Can you help?

  • How do you overlap PDF's and finish with one PDF file? Need help ASAP

    how do you overlap PDF's and finish with one PDF file?
    Need help ASAP

    I'm not sure if you can do that with CreatePDF.  Try it; you got one free use when you sign up with Acrobat.com
    If not, you will have to use Adobe Acrobat; there is a full-use 30 days trial.

  • Help IP restore error 21 (DFU ) running DFU  and error 1600. I need help

    I restore error 21 ( DFU ) >>> running DFU and error 1600. >>> I need help ?

    ip 4, 32g is me. I running FW up ios 6.0 >> error 21 ( DFU ) >>  mode DFU  >>>> error 1600 ( recovery mode )

  • I keep pressing  verify and it not working can you help me out , Thanks Please reply back .

    I keep pressing  verify and it not working can you help me out , Thanks Please reply back .HELP!

    Have you tried logging out of your account on the phone by tapping on your id in Settings > iTunes & App Stores and then logging back in and seeing if that 'refreshes' the account on it ?
    If that doesn't work then you can contact iTunes support via this page (these are user-to-user forums, you are not talking to Apple here) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

Maybe you are looking for

  • PI 7.1 EHP1 RFC Lookup- Issue

    Friends, I'm seeing one strange issue in RFC Lookup behavior in my PI 7.1 EHP1 . Please give me some ideas for the same Please see the below image for what I have done and what I'm seeing in the display queue. http://www.flickr.com/photos/8764045@N06

  • Monitor database and CPU and send events

    Hi. I would like to monitor the Oracle instance and the CPU and when something happens I want to send an event(e-mail or SMS). Is this possible using Oracle Enterprise Manager alone? Or do I need a third-party product like "Big brother"(http://www.bb

  • GetChildByName() issue with loop

    I'm trying to use XML to load in 4 images to a movieclip within a movieclip that is already created on the stage. I'm trying to do this in a loop since there are 4 movie clips I'm trying to access. I can get it working without the loop, but it's figu

  • Creating Web Services From EJBs In WorkShop

    Is there a way to create webservices by exposing local stateless session jbs from within Workshop 8.1? I have read BEA documentation that states that you should use the ant task to do this. I find this rather inconvenient that I had to run an additio

  • IPad mini mail app display rotation

    My iPad mini mail app rotation is locked.  No other app or display is affected.  How do I unlock?  How did it get locked?