Run multiples script problem
if i run mutiples script , it can't not commit , such as
insert into a
(a,b)
values
(1,2);
update b
set col = 1
where type = a;
but i run one by one no problem
what is the problem
thanks
Edited by: user11156736 on 2009/6/4 下午 8:15
Edited by: user11156736 on 2009/6/5 上午 1:32
Edited by: user11156736 on 2009/6/5 上午 1:33
user11156736 wrote:
if i run mutiples script , it can't not commit , such as
insert into a
values
(1,2)You are missing a semicolon here after the insert
>
update b
set col = 1
where type = a;
can you cut and paste the screen output which you are running.
paste the script or code in between two tags.
SS
Similar Messages
-
How to run multiple scripts in sql*plus?
I would like to run 2 scripts in sql*plus, how do I do this? I tried the following, but it won't run.
create table student_new
AS
select *
from student
insert into student_new
(last_name, first_name
values
(Crop, Jenny)
The above are the two scripts I want to run, what am I doing wrong.
ThanksDo you have a solution to run multiple scripts continuosly, one after the other as one script.
Say I have file1.sql file2.sql, file3.sql.
I want to create a script run.sql, where this will run file1.sql,file2.sql,file3.sql one after other without any one running one after the other like follows:
run.sql should have
begin
@file1.sql
@file2.sql
@file3.sql
dbms_output.put_line(select sysdate from dual);
end;
If I run run.sql all the three scripts should be executed successfully and then display the current time . All these files have update statements(50,000 updates each file).
Very urgetn. Can some one hlpe, please.
Thanks in advance. -
When an Applescript is run from the Applescript-menu-bar-menu and I start another script it seems as though the first script silently terminates. At least it never finishes.
I haven't been able to find out what causes this or how to workaround this. Anybody any suggestions?This link isn't discussing about what I meant.
I was saying that I run a script (.scpt) by selecting it from the Main-menubar. There's a script icon there on the right next to the eject-icon on my system. The particular script takes normally about 1.5hours to complete. However, when I start another script in the same way the first one never finishes.
Instead, it seems that the second one takes over execution and OSX apparently "forgets" about the first one. -
Running multiple scripts in one DataManager package
Dear Experts,
Is it possible to run several scripts across different application in one DM package?
cause I need to run a sequence of scripts that does one huge job and don't want to trouble users to click on many different packages...
If it's doable. Can anyone post an example how this can be done? Big thanks...
, Jim HsuHi Jim,
I'm assuming you're running BPC on MS, not NW? On MS, it's pretty easy.
Let's say you want to run two logic tasks SomeFinanceLogic.lgx in the Finance app, and SomeSalesLogic.lgx in the Sales apps. You'll call this task from the Finance app.
I'll take the standard FX Translation package as an example. Here is the existing MODIFYSCRIPT code in the eData -> Organize Package Lists -> Advanced screen:
'DEBUG(ON)
PROMPT(RADIOBUTTON,%CHECKLCK%,"Select whether to check work status settings when running logic.",1,{"Yes, check for work status settings before running logic","No, do not check work status settings"},{"1","0"})
PROMPT(SELECTINPUT,,,"Please select category, entity and time for restatement",%CATEGORY_DIM%%ENTITY_DIM%%TIME_DIM%)
TASK(Execute formulas,USER,%USER%)
TASK(Execute formulas,APPSET,%APPSET%)
TASK(Execute formulas,APP,%APP%)
TASK(Execute formulas,SELECTION,%SELECTIONFILE%)
TASK(Execute formulas,LOGICFILE,%APPPATH%\..\AdminApp\%APP%\FXTrans.lgx)
TASK(Execute formulas,RUNMODE,1)
TASK(Execute formulas,LOGICMODE,1)
TASK(Execute formulas,CHECKLCK,%CHECKLCK%)
The task name "Execute formulas" corresponds to the same task name that you'll find, when you open the DTSX file in BI Dev Studio.
Make a copy of FXTrans.dtsx and call it TwoAppLogic.dtsx.
Open the new dtsx file in BI Dev Studio, and copy the existing Execute formulas task so there are now 2 tasks. Sequence them together, and for clarity rename them to "Finance logic" and "Sales logic". If it matters logically which runs first, then sequence them accordingly. Save the DTSX file.
Then add the package in eData -> Organize package list, and modify the script in the "advanced" window as follows:
'DEBUG(ON)
PROMPT(RADIOBUTTON,%CHECKLCK%,"Select whether to check work status settings when running logic.",1,{"Yes, check for work status settings before running logic","No, do not check work status settings"},{"1","0"})
PROMPT(SELECTINPUT,,,"Please select category, entity and time for restatement",%CATEGORY_DIM%%ENTITY_DIM%%TIME_DIM%)
' these apply to the finance app logic
TASK(Finance logic,USER,%USER%)
TASK(Finance logic,APPSET,%APPSET%)
TASK(Finance logic,APP,FINANCE)
TASK(Finance logic,SELECTION,%SELECTIONFILE%)
TASK(Finance logic,LOGICFILE,%APPPATH%\..\AdminApp\Finance\SomeFinanceLogic.lgx)
TASK(Finance logic,RUNMODE,1)
TASK(Finance logic,LOGICMODE,1)
TASK(Finance logic,CHECKLCK,%CHECKLCK%)
' these apply to the sales app logic
TASK(Sales logic,USER,%USER%)
TASK(Sales logic,APPSET,%APPSET%)
TASK(Sales logic,APP,SALES)
TASK(Sales logic,SELECTION,%SELECTIONFILE%)
TASK(Sales logic,LOGICFILE,%APPPATH%\..\AdminApp\Sales\SomeSalesLogic.lgx)
TASK(Sales logic,RUNMODE,1)
TASK(Sales logic,LOGICMODE,1)
TASK(Sales logic,CHECKLCK,%CHECKLCK%) -
Jdeveloper-Running SQL Script Problem
Hi
Iam new bee to Jdeveloper.
I have developed sample datbase application in jdeveloper;
Can any one explain me how to excute Sql script??
Thanx in advance
smileZiqew,
you configure a database connection in JDeveloper where you specify the database connect information in the non-tnsnames form of server, port and SID.
Running a scritp against SWL*Plus, you select the SQL script in JDeveloper and choose SQL*PLus from teh context menu. I am doing this all the time and don't get problems.
Maybe your misunderstanding is that you add TNS names to where database SID is expected
Frank -
KODI/XBMC auto run and script problems?
I started a project a couple weeks ago to build a htpc using xbmc/kodi. I wanted to be able to play retro and steam games. So I've installed emulationstation and steam. Now comes the tricky part (for me anyways), writing bash scripts to access the programs through Advanced Program Launcher. Once I finally got that set up, I set the computer to login automatically and to auto run kodi. And here's where the issue happens. Normally when I run the simple script below, it closes kodi, and opens the program (so only one program is running at a time). However if I try to access the program from the auto-run instance of kodi, it doesn't close kodi before running. Instead, it opens the program and then opens another version of kodi. So if I press alt-tab it shows "kodi/emulationstation/kodi", so I have 3 programs open instead of 1 and trying to close any of them starts a cycle of new instances opening that causes a crash....
#bin/bash
killall -9 kodi.bin
emulationstation
kodi &
So since everything runs fine when I start kodi by hand (icon and terminal), I'm assuming the problem is the way I'm auto starting the program? I've used the autostart section under the LXsession configuration, trying @kodi and @lxterminal -e kodi but both produce the same problem. Is there another/better way to autostart a program that I can do this? Or do you guys think it's an issue with the script?
Thank in advance!!
I'm running Arch 64 bit with the LXDE desktop.How do you autostart kodi ? By enabling the service ?
In that case killing kodi would make it restart. -
Multiple scripts running at the same time?
Is there a way to have multiple scripts successfully running at the same time?
At the moment if I start a second script while the first one is still running, the second one completes successfully but the first one stops. This seems to be because the first one is no longer the active document once the second one opens so can't continue.
Is there another way to script things like this so that multiple can run independently at the same time? You might ask why I'd want to run two at the same time and not just wait, but i've setup an asp.net web form front end and having problems if two people click the button around the same time.
I'm guessing this isn't going to be possible and i'm going to have to look for ways of doing this in asp.net instead and somehow queue the requests so you have to wait longer if the script is already running?
Thanks,
AndyI'm
guessing this isn't going to be possible and i'm going to have to look
for ways of doing this in asp.net instead and somehow queue the requests
so you have to wait longer if the script is already running?
This is correct. The scripting interface to PS is single-threaded so you will need to queue up requests. -
Problem running multiple folder actions at the same time
Hi,
Does anyone have some experience running multiple folder actions at the same time?
I've written a Applescript folder action that processes some files. When adding some files, the script starts and all goes well. The processing of each file takes a few minutes, but all files are processed correctly.
However, when adding some new files to the dropfolder, while the folder action is all ready processing other files dropped a few minutes earlier, the process that is all ready running immediately aborts and the folder action is relaunched on the new files, leaving the old files for what they are...
The same problem occurs with multiple folders, each having a folder action attached. When dropping files in "Folder A", the script starts processing. But if someone droppes files in "Folder B", The script of folder A aborts, and the script of folder B starts processing. When adding more files to the folders, the result is the same. In some casses, when the last dropped files are processed, the os continues where the operation was aborted on the previous files. But this not always happens. To make things worse, when you remove the items from the folders afterwords, the folder actions starts running again on items no longer present in the folder !!!!
Does anyone know how I can prevent the folder action being aborted when new files are dropped and placing the new files in "Hold", until the previous files are processed? How can I prevent a folder action being aborted when a item is dropped into another folder?
I've written a small script to test this behaviour. Just create one or more folders and attach the script below. Drop a item into the folder, wait a few seconds and drop another one in the same or another folder. To monitor what happens please check the console.
on adding folder items to this_folder after receiving added_items
set FolderName to this_folder as string
set ItemName to added_items as string
repeat with theIncrementValue from 1 to 15
delay 2
do shell script ("logger \"Folder: " & FolderName & " - Item: " & ItemName & " - Step: " & theIncrementValue & "\"")
end repeat
do shell script ("logger \"Folder: " & FolderName & " - Item: " & ItemName & " - Done...\"")
end adding folder items to
Thanks for any feedback.That is pretty much the way Folder Actions work, especially since AppleScript is not multi-threaded. If you are using them as some intermediate step in a workflow, you might rethink the way you are handling the files (for example, use a droplet instead). Other options would be using launchd to watch a path or a shell script on a different thread.
-
Hi, i am trying to run a script in SQL*Plus that has been supplied by Metalink but i am very new to SQL*Plus and i connot get the script to run correctly.
FYI we are curently using Oracle 11.5.10.
I logon to SQL*Plus successfully then i start the script like this:-
Start INVct115h
The script appears to run correctly and prompts me to enter the the user name, but after i do this i get the following error:-
ERROR - Could not retrieve any responsibilities for this User
ACTION - Ensure User is valid and has at least one responsibility assigned.
Type Ctrl-C <Enter> to exit the script. Rerun the script with a valid user
name.
Do you have any ideas what it is that i am doing wrong? I know the password and host names are correct.
Thanks
AnnaHi, thank you for your comments but i am trying to run the script in SQL*Plus version 9.2.0.1.0 and while yes i agree the error is not a SQL*Plus error it was the error that the script produced.
The script should be list all the responsibilites for the user entered but for reasons that i do not understand it is not being able to find the user.
SQL*Plus indictates that i have successfuly connected to the correct database.
But maybe you are correct and this not a SQL*plus problem.
Regards,
Anna -
Oracle 11gR2 RAC: Running the script root.sh problem
Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
I have been installing Grid Infrastructure using runInstaller from step 1 to step 9 of 10 in both VM rac1 and rac2.
Now, I am running the script root.sh in VM rac1 and rac2 as below:
[root@rac1 /]# /u01/app/grid/root.sh
Output:
CRS-4123: ohasd is starting
FATAL: Module oracleoks not found
FATAL: Module oracleadvm not found
FATAL: Module oracleacfs not found
ACFS-9121: Failed to detect /dev/asm/.asm_ctl_spec
ACFS-9310: ADVM/ACFS installation failed.
ACFS-9311: not all components were detected after installation
'UpdateNodeList' was successful.
[root@rac1 /]#
[root@rac2 /]# /u01/app/grid/root.sh
Output:
CRS-4123: ohasd is starting
FATAL: Module oracleoks not found
FATAL: Module oracleadvm not found
FATAL: Module oracleacfs not found
ACFS-9121: Failed to detect /dev/asm/.asm_ctl_spec
ACFS-9310: ADVM/ACFS installation failed.
ACFS-9311: not all components were detected after installation
Start of resource "ora.asm_init" failed.
Failed to start ASM.
Failed to start Oracle Clusterware Stack.
[root@rac2 /]#
As we see the output above, rac1 and rac2 get the same problems. in addition, rac2 fails to start ASM and Clusterware stack. Thus, I have 2 questions:
First, the common problem for rac1 and rac2 :
1)Module "oracleoks, oracleadvm, oracleacfs" not found
2)/dev/asm/.asm_ctl_spec not detected
3)ADVM/ACFS installation failed
Do the above 3 factors affect Grid and DataBase Installation later ? If yes, how to solve these problems ?
Second, how to start ASM and Clusterware stack in rac2 ?
Thanks.you have 2 options:
1. OEL 5.6 comes with 2 kernels, the original Red Hat, and Oracle UEK, you can choose not to use UEK
or the one i would recommend:
2. Upgrade Grid Infrastructure,
*11.2.0.3.1* (patch 13348650, released about a 1 month ago) supports ACFS on UEK (starting with 2.6.32.200 IIRC) -
Can you suggest me how to run multiple calc scripts using singel maxl script
Hello,
I am writing a maxl script which should be able to :
1. update Set Variables for the Essbase DB
2. Execute multiple calc scripts
2a. Trying to put specific sleep time within multiple calc scripts.
Thanks and Regards.Why are you looking for a Maxl to run multiple maxls? Can't you use a batch or sh script to do it.
Unix has a sleep command in batch file try using choice
Regards
Celvin -
Running multiple instances of program at same time problems
I have a c++ program that uses BerkeleyDB 4.8.26 with transactions. Program works well, and I can run multiple instances of program and they cooperate on database very well. Problem arises when I run a small test program that runs 10 instances of the same program at same time.
Test program opens database with transactions, it does some database reads and writes and quits. This test is run in 10 instances of the same program at the same time. Some instances run and finish well, other instances end up with some of these errors:
unable to allocate memory for the lock table
PANIC: Cannot allocate memory
Error opening environment: DB_RUNRECOVERY: Fatal error, run database recovery
another with:
db_files/__db.001: No such file or directory
db_files: No such file or directory
Error opening environment: Invalid argument
others with this one:
Log file corrupt at LSN: [1][84474]
fileops: close db_files/log.0000000001
PANIC: Invalid argument
unable to join the environment
db_files: No such file or directory
Error opening environment: DB_RUNRECOVERY: Fatal error, run database recovery
I don't understand reason of this error, as I thought (and read) that BerkeleyDB should be able to handle multiple instances accessing database and is thread-safe.
I tried to run the test on both NFS and local disk drive with same results.
Is there anyone with ide what could be causing this problem ? My platform is x86_64 GNU/Linux 2.6.18-164.el5
Edited by: Miro Janosik on 21.9.2010 22:42If there is someone who would like to look at this problem I'd like to show you program log files with verbose output turned on. There are 11 log files in the archive: http://bin.mypage.sk/FILES/log.rar
Log files that end up with lines like this one below mean that program finished running ok:
4000|0 4 20100922 07:07:24.094 20100922 07:07:24.094 FLOW_CMD
Here below is output from one of log files:
FilePersistentStorage::open() start
FilePersistentStorage::open() ReadDir
FilePersistentStorage::open() db_env_create
FilePersistentStorage::open() db_env_create ok
FilePersistentStorage::open() set cachesize
FilePersistentStorage::open() set_tx_max
FilePersistentStorage::open() set_timeout
FilePersistentStorage::open() set_lk_detect
FilePersistentStorage::open() exists homedir?
envp->open
FilePersistentStorage::open() envp->open
fileops: stat /var/tmp
fileops: open db_files/__db.rep.init
fileops: close db_files/__db.rep.init
fileops: open db_files/__db.001
fileops: close db_files/__db.001
fileops: open db_files/__db.001
fileops: mmap db_files/__db.001
fileops: close db_files/__db.001
unable to join the environment
fileops: directory list db_files
fileops: unlink db_files/__db.005
fileops: unlink db_files/__db.004
fileops: unlink db_files/__db.003
fileops: unlink db_files/__db.002
fileops: unlink db_files/__db.001
fileops: open db_files/__db.001
fileops: open db_files/__db.001
fileops: read db_files/log.0000000001: 12 bytes at offset 371
Finding last valid log LSN: file: 1 offset 371
fileops: close db_files/log.0000000001
fileops: open db_files/__db.005
fileops: seek db_files/__db.005 to 794624
fileops: write db_files/__db.005: 8192 bytes
fileops: mmap db_files/__db.005
fileops: close db_files/__db.005
fileops: open db_files/__db.006
fileops: seek db_files/__db.006 to 376832
fileops: write db_files/__db.006: 8192 bytes
fileops: mmap db_files/__db.006
fileops: close db_files/__db.006
fileops: open db_files/log.0000000001
fileops: read db_files/log.0000000001: 12 bytes at offset 335
fileops: read db_files/log.0000000001: 371 bytes at offset 0
fileops: directory list db_files
fileops: open db_files/log.0000000001
fileops: read db_files/log.0000000001: 28 bytes
fileops: close db_files/log.0000000001
Recovery starting from [1][243]
fileops: close db_files/log.0000000001
fileops: open db_files/log.0000000001
fileops: read db_files/log.0000000001: 28 bytes
fileops: write db_files/log.0000000001: 92 bytes at offset 371
fileops: flush db_files/log.0000000001
fileops: close db_files/log.0000000001
fileops: open db_files/log.0000000002
fileops: close db_files/log.0000000002
fileops: open db_files/log.00002
fileops: close db_files/log.00002
fileops: open db_files/log.0000000001
fileops: seek db_files/log.0000000001 to 463
fileops: write db_files/log.0000000001: 4096 bytes
fileops: write db_files/log.0000000001: 4096 bytes
fileops: write db_files/log.0000000001: 4096 bytes
fileops: write db_files/log.0000000001: 4096 bytes
fileops: write db_files/log.0000000001: 3633 bytes
fileops: close db_files/log.0000000001
Recovery complete at Wed Sep 22 07:07:23 2010
Maximum transaction ID 80000002 Recovery checkpoint [1][371]
FilePersistentStorage::open() ok
envp->lock_detect
FilePersistentStorage::open() lock_detect
rejected locks count: 0
db_create
dbp->open
fileops: stat db_files/test_aaps.db
fileops: stat db_files/test_aaps.db
fileops: stat db_files/__db.80000001.d9f23b56
fileops: open db_files/log.0000000001
fileops: read db_files/log.0000000001: 28 bytes
fileops: write db_files/log.0000000001: 67 bytes at offset 463
fileops: flush db_files/log.0000000001
fileops: open db_files/__db.80000001.d9f23b56
fileops: stat db_files/__db.80000001.d9f23b56
fileops: seek db_files/__db.80000001.d9f23b56 to 0
fileops: write db_files/__db.80000001.d9f23b56: 4096 bytes
fileops: seek db_files/__db.80000001.d9f23b56 to 4096
fileops: write db_files/__db.80000001.d9f23b56: 4096 bytes
fileops: flush db_files/__db.80000001.d9f23b56
fileops: close db_files/__db.80000001.d9f23b56
fileops: stat db_files/test_aaps.db
fileops: stat db_files/__db.80000001.d9f23b56
fileops: unlink db_files/__db.80000001.d9f23b56
fileops: open db_files/log.0000000001
fileops: read db_files/log.0000000001: 12 bytes at offset 463
DB_LOGC->get: LSN 1/463: invalid log record header
DB_TXN->abort: log undo failed for LSN: 1 463: Input/output error
fileops: close db_files/log.0000000001
PANIC: Input/output error
fileops: open db_files/log.0000000001
fileops: read db_files/log.0000000001: 12 bytes at offset 463
PANIC: fatal region error detected; run recovery
DB_LOGC->get: LSN: 1/463: read: DB_RUNRECOVERY: Fatal error, run database recovery
DB_TXN->abort: log undo failed for LSN: 1 463: DB_RUNRECOVERY: Fatal error, run database recovery
fileops: close db_files/log.0000000001
PANIC: DB_RUNRECOVERY: Fatal error, run database recovery
PANIC: DB_RUNRECOVERY: Fatal error, run database recovery
dbp->open end
dbp->close
PANIC: fatal region error detected; run recovery
envp->close
File handles still open at environment close
Open file handle: db_files/log.0000000001
fileops: close db_files/log.0000000001
PANIC: fatal region error detected; run recovery
Database 'db_files//test_aaps.db' open failed: DB_RUNRECOVERY: Fatal error, run database recoveryDatabase close failed: DB_RUNRECOVERY: Fatal error, run database recovery
environment close failed: -
ILife '09 installation problems; run preflight script error
Hi, not sure where else to put this topic so I figured this would be the best place. The iLife section has forums for individual applications and not the entire thing.
I'd like to point out that I had iLife '08 installed and working but I uninstalled it before I proceeded with the '09 installation since I wanted to start clean. I also installed iWork '09 successfully.
When I try installing iLife '09 however, I get a an error stating "The following install setup failed: run preflight script for registration. contact the software manufacturer for assistance.". I have tried to repair disk permissions through Disk Utility and then reboot, but still get the same error. I have also tried using some of Onyx's "cleaning" utilities, but it doesn't help either.
I also get the same "run preflight script" error when I try installing the latest Quicktime update through Apple Software Update application.
Not sure any of these are related but I'm out of ideas. Is anyone else getting anything similar or know how to fix any of this?Just a guess, but do you have a retail disk of iLife '09 or an upgrade that came as a supplement to your new Mac? If the latter, you should have the iLife '08 applications installed in their default locations (where they were located when you first started up the new Mac) because it is highly unlikely that an upgrade disk can upgrade what is not there.
If this is your problem, you may not have to reinstall the entire OS. Instead, first try looking for an "Install Bundled Software" app (or something with a similar name) on your new Mac's system disk 1. This may allow you to reinstall the original iLife apps without having to reinstall the OS. If so, the upgrade disk should work once they are back in place. -
Running Ecatt script multiple times
I have created a ecatt script for ME21N. I need the script to run multiple times.So,i have used Do Enddo statement and put the number of times to be executed.
The script is running fine for the first time. then its not running. From the second time,its putting blank values into the fields and not saving the data.
How can i run the script multiple times.
Thanks,
Aparna.Hello,
When you run the script multiple time then you will have to pass different values to the fields so that every time the script is run with new set of values and the data is created.
So in the script you will have to parameterize the fields and then handle the position of the fields so that when the script is run for the first loop counter the data is maintained in the first line of the transaction(for example) and the increament the counter for the second run so that the control moves to the second line for the second execution similarly for the multiple runs.
Alternatively parameterize the fields with the table containing so many entries as the number of times you want to run the script and for each execution one set of entry from the table is picked and used in the execution for the next run the second set of values is used and so and so forth.
Hope it answers your question.
Thanks and Best regards,
Ajay -
I have a request from a cutomer to run a script to create multiple username and password on ACS5.3 Appliance. Does anyone has any suggestion on how to go about this?
Have you tried using the import option on the ACS? You can put all your accounts in a csv file and upload it into the ASA.
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/user/guide/users_id_stores.html#wp1132152
If that doesnt work you can use the REST Web Services in ACS also:
http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_system/5.3/sdk/rest.html
Thanks,
Tarik Admani
*Please rate helpful posts*
Maybe you are looking for
-
Error Message 11556 when trying to sign in to iTunes Store
For the past week or so, when trying to sign in to the iTunes Store, I get an unknown error message (11556). I don't have any connectivity problems... I can connect to the internet without any problems... my iTunes opens the internet when I click on
-
Uploading File to server from local machine
how to Upload the File to server from local machine. Using java applet, how to upload the file to secure server. I dont know how to proceed the steps for uploading Reply me ASAP.......
-
ESS / MSS Configuration - Pre-requisites
Hi, We are planning to implement portal functions like ESS, MSS, e-recruitment and other features present in EHP 7 (ECC 6.0) during up gradation. In this regard, I would like to know what are the system prerequisites that needs to be taken care of fo
-
I am trying to check on the status of my iPhone 6 order. Friends have gotten a tracking number but i have not received anything, i just wanted to check to make sure that everything is still looking ok but the page states system issues. When is this e
-
How to not show path in address bar?
how do you not show the full path of the file in the adress bar? eg: www.adobe.com/forums/forum.asp instead having it show www.adobe.com/forums I have heard you rename the main page in the folder to index but never really seams to work for me any clu