Run Report From Workflow Item
Hi All
I want to create work item that will run a Transaction/Report.
when the user will execute the work item from his inbox
It will run a Transaction "z*" with some parameters and display the result (ALV Rp)
Thanks in Advance For Any Help.
Hi Kobi,
1. Change (or extend) the BOR to create a new method to display this report or transaction.
2. When you define the method, you get a popup with 3 tabs. In the Abap tab, you can link it to a Transaction (or even a report).
You can also pass data.
3. Now create a new task in your workflow that will call this BOR method.
4. Create a new Workflow step, that will call this task created in step 3.
As simple as that.
Btw, if you want more details on this, you can refer to the SAP Workflow book from SAP Press. You can also read the SAP Help documentation which mentions these steps.
Hope this helps you. If it does, remember to reward points.
Rgds,
Prashanth.
SAP.
Similar Messages
-
How to run report from forms 6i
i want to run report from forms 6i.
can anyone help me in this regard.
asif iqbal
karachi.hi
try something like this.
parameter_list_id := CREATE_PARAMETER_LIST('temp_data');
mywhere:='where 1=1';
if :RESULT_VALUE is not null then
mywhere:=mywhere || ' and diagnosis like ''%'||:RESULT_VALUE||'%''';
end if;
if :HISTORY is not null then
mywhere:=mywhere || ' and histodesc like ''%'||:HISTORY||'%''';
end if;
if :RCOMMENTS is not null then
mywhere:=mywhere || ' and scomments like ''%'||:RCOMMENTS||'%''';
end if;
if :PATHOLOGIST is not null then
mywhere:=mywhere || ' and PATHOLOGISTS like ''%'||:PATHOLOGIST||'%''';
end if;
mywhere:=TRANSLATE(mywhere,' ','~');
ADD_PARAMETER(parameter_list_id,'MYWHERE',TEXT_PARAMETER,mywhere);
RUN_PRODUCT(REPORTS,'C:\SearchResult.RDF',SYNCHRONOUS,RUNTIME,FILESYSTEM,parameter_list_id,NULL);
ADD_PARAMETER(parameter_list_id,'PARAMFORM',TEXT_PARAMETER,'NO');
DESTROY_PARAMETER_LIST(parameter_list_id);and also u can try the following code please modify it with u r requirements.
declare
v_plist_id paramlist;
pl_name varchar2(50) := 'rep_params';
begin
v_plist_id := get_parameter_list(pl_name);
check_param_list (pl_name); --Check availability of paramlist and
destroy is present
--When the parameter list already exists it needs to be distroyed first
if not id_null(v_plist_id) then
destroy_parameter_list(v_plist_id);
end if;
v_plist_id := create_parameter_list(pl_name);
add_parameter(v_plist_id, 'P_1', text_parameter, :block_name.item);
-- input parameter
add_parameter(v_plist_id, 'PARAMFORM', text_parameter, 'NO'); --
suppress the display of the Reports p-form
add_parameter(v_plist_id, 'DESTYPE', text_parameter,
:control.dest_type); -- set file destination type
add_parameter(v_plist_id, 'DESNAME', text_parameter,
:control.dest_name); -- set file destination name
add_parameter(v_plist_id, 'DESFORMAT', text_parameter,
:control.dest_format); -- set file destination format
-- call reports
run_product(reports, 'reports_file', asynchronous, runtime,
filesystem, v_plist_id, null);
end;sarah -
Running reports from forms on the web
On forms and reports 6i we used the following code to run reports from forms.
We need to do the same on 9i forms and reports, we are running into problems.
Any help will be appreciated.
PROCEDURE web (inFileName VARCHAR2,
inRecordGroup RECORDGROUP) IS
outVirtualPath VARCHAR2(200) := '/forms90/f90servlet?p_url=/reports/rwservlet?'; outServer VARCHAR2(200) := 'server=rep_ora-app-4';
outReport VARCHAR2(200) := 'report='||inFileName;
outUserid VARCHAR2(200) :=
'userid='||GET_APPLICATION_PROPERTY(USERNAME)||'/'||GET_APPLICATION_PROPERTY(PAS
SWORD)||'@'||GET_APPLICATION_PROPERTY(CONNECT_STRING);
outDesType VARCHAR2(200) := 'DESTYPE=CACHE';
outDesFormat VARCHAR2(200) := 'DESFORMAT=PDF'; outUser VARCHAR2(2000);
outCount INTEGER;
error we are getting.
FRM-42017:Module name must be specified.S Hatch (guest) wrote:
: I'm thinking that you're going to have to install the Reports
: cartridge, create an entry in the keymap with any parameters
and
: call your report via the url.
: Dessislava Gantcheva (guest) wrote:
: : How do I call a report from a form on the web?
: : I have installed Windows NT Server 4.0 with SP 5, OAS4.0.7
EE
: : with patch 1, Developer 6.0 with patch 1. Developer server
and
: : forms server work fine in a non-cartridge implementation,
but
: I
: : cannot run a report within a form. I just have no any info
how
: : to do this.
I have entries in my keymap file and I can call my reports via
the url, but I cannot run a report WITHIN a form. I mean to call
a report by clicking on a button of a form on the web. The
RUN_PRODUCT built-in does not work (at leas it seems like this)
If any one has expiriense with it, please, give me a hint.
Thanks
null -
How can we run reports from the front enf of iProcurement...
Hi Guys,
I need to create a link to run reports from the front end in iProcurement webpage instead of using apps SRS to run the report...
help needed...
thanks
amanHi Tapashray,
That was a great help. Thank you so much. A few more clarifications needed sir..
I refered to a previous link and came to know about a prcedure he followed for a report. So is it the same way that is to be done... I pasted a descr what he said in the thread. In ur solution, you said, have a link bean. what do u mean by that. After i go thru all the steps what this guy told.
It would be of gr8 help if you kindly look in to this for one more minute sir..
thanks
Creating a new report in 11.5.9
Re: Creating a new report in 11.5.9
Posted: Mar 11, 2005 7:12 PM in response to: dhergert Reply
Ok, I was able to figure out the functions that were confusing me. For my own record and for those that do not know, I will list how to create the objects necessary to add a new report to a menu.
1-Write JSP (should be written just how Oracle writes theirs)
2-Creat function for the new JSP page as System Administrator responsibility
3-Use Sys Admin to add the function to a menu somewhere
4-Using AK Developer responsibility, create an attribute with the label of the attribute being the name of your function you created. Oracle's convention is the name of the attribute has FS in it.
5-Using AK Developer, lookup the ASF_FUNC_SEC_REG region
6-Drill down into that regions attributes
7-Add a your newly created attribute to this region -
hi,
I am having problems in running report from form.
I am using oracle 9i on windows 2000 server and no 9iAS at the moment. On client side, i have windows xp and 9iDS installed. I want to run report from forms in 9iDS testing environment.
my forms are running ok but now i need to run report. so what i have done is that i have created a report object in form and following are enteries present in it at the moment.
Name REPORT7
FileName D:\Projects\IBMR\forms\soil_water_quality_data.rdf
Execution Mode Batch
Communication Mode Synchronous
Destination Type Cache
Report Server 9irep
and in when_button_pressed trigger
DECLARE
Report_Id REPORT_OBJECT;
Report_Job_Id VARCHAR2(20);
Report_Status VARCHAR2(80);
Report_Svr VARCHAR2(20);
BEGIN
Report_Id := FIND_REPORT_OBJECT('REPORT7');
Report_Svr := '9irep';
SET_REPORT_OBJECT_PROPERTY(Report_Id,REPORT_EXECUTION_MODE, BATCH);
SET_REPORT_OBJECT_PROPERTY(Report_Id,REPORT_FILENAME, '\projects\ibmr\forms\soil_water_quality_data.rdf');
SET_REPORT_OBJECT_PROPERTY(Report_Id,REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(Report_Id,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(Report_Id,REPORT_OTHER, 'paramform=no');
Report_Job_Id := RUN_REPORT_OBJECT(Report_Id);
Report_Status := REPORT_OBJECT_STATUS(Report_Job_Id);
WHILE Report_Status IN ('RUNNING','OPENING_REPORT','ENQUEUED') LOOP
Report_Status := REPORT_OBJECT_STATUS(Report_Job_Id);
END LOOP;
IF Report_Status = 'FINISHED' then
WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||substr(Report_job_id,instr(Report_Job_Id,'_',-1)+1)||'?'||'server=9irep','_blank');
else
message ('report server failed with error message '||report_status);
END IF;
END;
i have installed report server with following command
rwserver -install 9irep
i have changed entry in rwservlet.properties like
SINGLESIGNON=NO and i have removed the following entire block of 9irep.conf, which i have read from some documentation
<!--security id="rwSec" class="oracle.reports.server.RWSecurity">
<property name="securityUserid" value="%PORTAL_DB_USERNAME%/%PORTAL_DB_PASSWORD%@%PORTAL_DB_TNSNAME%" confidential="yes" encrypted="no"/>
</security-->
i get the following error message when i run my form
frm-41214 Unable to run report
and then next message is
frm-41217 unable to get report job status
i debugged the report id and it is
9irep_0
returned by Report_Job_Id := RUN_REPORT_OBJECT(Report_Id);
When I checked the Report Queue Manager
it is showing status like
(9irep)Terminated with error
and detail it shows is
Unable to connect to the specified database.
Now I am wondering what to do next.
any suggestions???????Hello,
From your description, it seems like the report is faling due to a database authentication problem. When you run your report from Forms, Forms internally passes the its database connection information to Reports automatically. So ensure that you are connected to a valid database in Forms, before the report is called.
Please verify whether a simple report which does not require a database connection, for example, a report containing only a boilerplate text object, is running correctly. Also, in the trigger code that you have specified, you should add the following:
SET_REPORT_OBJECT_PROPERTY(Report_Id, REPORT_DESTYPE, CACHE);
so that the report output gets generated to the server cache, and can be retrieved using rwservlet/getjobid.
Thanks,
The Oracle Reports Team. -
FRM-92101 error while running report from form
HI All,
I am getting the form error FRM-92101 while running report from form menu.My code is given below:
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('REPORT47');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT('http://192.168.0.21:8889/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
message('Error when running report');
END IF;
Clear_message;
END;
Clear_message;
--Arifhi Arif
Please see this note on MOS/Metalink for some common causes of this error:
Known Causes of FRM-92101 Error In Forms [ID 604633.1]
thanks,
AMN -
I want to run report from FORM
I want to run report from FORM. The report will save in PDF format then OPEN automatically in PDF
Every PDF file should have a unique file name.
I am using Form 6i and Reports 6iDECLARE
vParamList PARAMLIST;
BEGIN
vParamList:=GET_PARAMETER_LIST('MyRep');
IF NOT ID_NULL(vParamList) THEN
DESTROY_PARAMETER_LIST(vParamList);
END IF;
vParamList:=CREATE_PARAMETER_LIST('MyRep');
SET_REPORT_OBJECT_PROPERTY('report_path\emp_rep_def',REPORT_DESFORMAT,'PDF');
RUN_PRODUCT(REPORTS,'report_path\emp_rep_def',ASYNCHRONOUS,RUNTIME,FILESYSTEM,vParamList,NULL);
END; -
Run Report from Oracle Forms9i
Hi how are u all.......i am shahzad and i have little problem....i am working on developer 6i with oracle 9i database..........now i upgrade into developer 9i.....now the problem is that when i call the report from form then error is generated that is like'you cannot use reun run_product here use run_report_object'
Any one plz tell me how to run report from forms 9i also how to pass parameter too...means check the parameter from forms and give me the reports
guys its urgent
Thanks in advance :)
Thanks youfot this u have to use standard code as follows
parameter list is as it was in 6i
v_report_id := FIND_REPORT_OBJECT('report name');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESTYPE,file);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESFORMAT,'dflt');
Set_Report_Object_Property(v_report_id,REPORT_OTHER,'ENVID="NFA"');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESNAME,ls_file_path||'\'||to_char(sysdate,'dd')||
-- to_char(sysdate,'mm')||to_char(sysdate,'yyyy')||'.doc');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_EXECUTION_MODE,RUNTIME);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_OTHER, 'paramform=no');
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_SERVER,reportserver);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_DESNAME,OUTFILE);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_SERVER, reportserver);
SET_REPORT_OBJECT_PROPERTY(v_report_id,REPORT_OTHER, 'paramform=no');
vc_report_job_id:=RUN_REPORT_OBJECT(v_report_id,pl_id);
v_jobID := substr(vc_report_job_id,length(reportserver)+2,length(vc_report_job_id));
if vc_report_job_id is not null then
vc_rep_status := REPORT_OBJECT_STATUS(vc_report_job_id);
while vc_rep_status in ('RUNNING', 'OPENING_REPORT','ENQUEUED') LOOP
vc_rep_status := report_object_status( vc_report_job_id);
end loop;
IF vc_rep_status<>'FINISHED' THEN
message ('Report failed with error message '|| vc_rep_status);
END IF;
end if; -
When run report from form(6i) on the web,error FRM-921000
While I was trying to run report from form (6i)on the web,it will give me this error
message FRM-921000 and hang.
But when I try to call form using form,I do
not have the problem.
May I know ehat is the cause?
Anybody encounter this before?
Thanks
nullI am running Forms 6i on the web and attempting to call me report via RUN_REPORT_OBJECT. I am getting the same error as Jenny FRM-92100. I need to pass a parameter list so I don't think I can use WEB.SHOW_DOCUMENT. Any ideas???
Thanks,
Jenny N.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Joseph Schwertner ([email protected]):
Dear Jenny,
I am running reports from Forms 6i on the WEB. I did not encounter your problem. Nevertheless I would like to share the following with you.
RUN_PRODUCT doesn't work for calling reports ON THE WEB. Instead using RUN_PRODUCT do the following:
1. Install Oracle Reports Server
2. For WEB calls of reports use WEB.SHOW_DOCUMENT
3. Learn how to pass parameters to the reports. It is a litlle bit strange, but it is explaint excellent in the documentation to the Reports Server.
I hope this will help you.
Joseph Schwertner
<HR></BLOCKQUOTE>
null -
OAS in Unix: URL not found when run report from Form???? please help
Hi,
We have succesfully install OAS with Form Server and Report Server in
Unix. We able to run Form and Report direct from browser. But we having
problem to run Report from direct Form within the browser. The message from
the browser was 'The requested URL was not found'. We use run_product to run
report from form. Below is the statement:-
Run_Product(REPORTS, 'A10001', SYNCHRONOUS, RUNTIME, FILESYSTEM, pl_id,
NULL);
Does anyone have an idea??
Thanks in advance.
nullplease check env. variables
1. FORMS60_MAPPING
2. FORMS60_OUTOUT
FORMS60_MAPPING should point to vartual directory on your forms webserver
FORMS60_OUTPUT should point to physical
directory path of vartual directory
FORMS60_MAPPING
regards
Darshan
[email protected]
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by leong([email protected]):
Hi,
We have succesfully install OAS with Form Server and Report Server in
Unix. We able to run Form and Report direct from browser. But we having
problem to run Report from direct Form within the browser. The message from
the browser was 'The requested URL was not found'. We use run_product to run
report from form. Below is the statement:-
Run_Product(REPORTS, 'A10001', SYNCHRONOUS, RUNTIME, FILESYSTEM, pl_id,
NULL);
Does anyone have an idea??
Thanks in advance.
<HR></BLOCKQUOTE>
null -
Unable to run report from forms developer.
hi....
i m not very much in developer 9i.from last 2 month i m doing developer 9i.I m desiging and running
report from report builder.but i m not able to run that report from forms developer.Can anyone help to solve my problem?is there any particular extension i have to follow or any configuration(Application server) i have to made change?What code i have to write to run a report from forms?Hi frank...
Thanx for ur reply...
Actually what i did,i created a report and save that report with .rdf extension.I set reports_path(In Registry) property to the particular folder where i put all of my reports.In forms developer i add the report as report object from that folder.i set the following few lines in a button click event
--=============================================
declare
rep_id report_object;
v_rep varchar2(30);
begin
rep_id :=find_report_object('report4');
v_rep :=run_report_object(rep_id);
end;
--=============================================
when i click the button it is showing a error "You didnot specify the report name".This is all about from me what i did to run a report from forms.So should i do to run report? -
How to run report from form using run_object_report
I AM USNING FORMS9I/REPORTS 9I , HOW TO RUN REPORT FROM FROM USING RUN_REPORT_OBJECT AND HOW
TO PASS PARAMETER AS WE DID IN RUN_REPORTS PLEASE HELP MEhere an example !
I hope this example you can use it
PROCEDURE pr_reporte IS
BEGIN
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status Varchar2(20);
d1 DATE;
d2 DATE;
BEGIN
d1 := :GLOBAL.DIA_INI;
d2 := :GLOBAL.DIA_FIN;
repid := find_report_object('rep_lab02');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,'p_fec_uno='||to_char((add_months(last_day(d1),-1) +1),'DD/MM/YYYY')||' '||
'p_fec_dos='||to_char(d2,'DD/MM/YYYY'));
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'pdf');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := report_object_status(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED') LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' then
WEB.SHOW_DOCUMENT('/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver','_blank');
ELSE
ventana('E','error reporte no encontrado','S');
END IF;
END;
END;
The 'rep_lab02' is the name of the report that you give in the node reports
p_fec_uno and p_fec_dos they are the parameters in the report
repserver is the name of server created with rwserver
Greetings -
I've interview tomorrow , still do not know how to run report from forms
hi all ,
i asked before about running report from forms 10g rel2 , but vainly , because i could not configure the reports server ,
and no one told me .
now i've an interview tomorrow , and sure it will be included in the task which i have to do .
i am in a bad need for your step by step help
thanks in advanceExcuse me for being lazy and not searching your previous threads containing questions about configuring your reports server. As I don't know their content I don't know the links posted, the advices given and what you did, and as this is a new thread I'll go ahead and ask what you tried, where you failed and what exactly did not work out for you.
i am in a bad need for your step by step help Fine, here is an easy one:
Step 1: go to http://tahiti.oracle.com
Step 2: click on "Oracle Application Server, 10g Release 2 (10.1.2)"
Step 3: click in the searchbox, type "Configuring Reports Server"
Step 4: click "search"
Step 5: You will be redirected to some links, the very fist of them is this:http://docs.oracle.com/cd/B14099_19/bi.1012/b14048/pbr_conf.htm
This is as step-by-step as it gets, if you want detailed help ask detailed questions.
cheers -
hi all,
i have tried to run report from forms using below codig(got from online help)
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status varchar2(20);
v_host varchar2(100):= 'localhost';
v_port varchar2(10);
v_parameter_string varchar2(4000);
v_username varchar2(50);
v_password varchar2(50);
v_database varchar2(50);
BEGIN
repid := find_report_object('REPORT27');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
if rep_status = 'FINISHED' then
message('Report Completed');
copy_report_object_output(v_rep,'E:/Rep/local1.pdf');
-- host('MOZILLA E:/Rep/local.pdf');
-- WEB.SHOW_DOCUMENT('http://192.168.0.160:1521/reports/rwservlet/getjobid'||
-- substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver','_blank');
else
message('Error when running report.');
end if;
-- Get the full domain name of the server from the formsweb.cfg
tool_env.getvar('SERVER_URL',v_host);
-- Get the username/password and database from the .env file
tool_env.getvar('APPLICATION_USERNAME',v_username);
tool_env.getvar('APPLICATION_PASSWORD',v_password);
tool_env.getvar('APPLICATION_DATABASE',v_database);
-- If it is localhost then we are running on windows and need to use the windows port, otherwise we
-- are on AIX and need to use the AIX port
IF v_host = 'localhost' THEN
v_port := '8889';
ELSE
v_port := '8889';
END IF;
-- Now build the parameter string for running the report
v_parameter_string := 'server=repserver';
v_parameter_string := v_parameter_string||'&report= E:\AGE_NoELIGIBLEReport.rdf';
v_parameter_string := v_parameter_string||'&userid='||v_username||'/'||v_password||'@'||v_database;
v_parameter_string := v_parameter_string||'&execution_mode=batch';
v_parameter_string := v_parameter_string||'&comm_mode=synchronous';
v_parameter_string := v_parameter_string||'&destype=cache';
v_parameter_string := v_parameter_string||'&desformat=pdf';
-- Now run the report
web.show_document('http://'||v_host||':'||v_port||'/reports/rwservlet?'||v_parameter_string,'_blank');
END;
REP-110: Unable to open file ' AGE_NoELIGIBLEReport.rdf'.
REP-1070: Error while opening or saving a document.
REP-0110: Unable to open file ' AGE_NoELIGIBLEReport.rdf'.
but i hav report in e:\ then why its getting?Hi,
I suggest you not to use the "E:\" directory letter, but the REPORTS_PATH instead.
<p>
from the Online Help
</p>
<p>
On Windows, edit environment variables through the Registry Editor (Start > Run > Regedit).
</p>
<p>
On UNIX, edit environment variables by revising and running the shell script that defines the initial default values (reports.sh). If you do this, be sure to keep a backup of the original, unaltered reports.sh file.
</p>
<p>
Regards
JeanYves
</p> -
hi all,
I am working in oracle forms 6i and i am trying to run report from
form while press one of the push-button. works fine upto 2nd line from the
begin key-word.After that its showing error like " FRM-40738:Argument 1 to builtin
REPORT_OBJECT_STATUS cannot be null.". Can any-one help me of how to solve this and
wat would be the problem.........?
declare
run_rep varchar2(200);
rep_obj report_object;
rep_stat varchar2(20);
begin
rep_obj := find_report_object('report46');
run_rep := run_report_object(rep_obj);
rep_stat := report_object_status(run_rep);
if rep_stat = 'FINISHED' then
copy_report_object_output(run_rep, 'C:\Documents and Settings\trainee\Desktop\Icons\test.pdf');
else
message('error when running report');
end if;
end;
Please help asup!
regards,
jamehi rosario,
Thanks for ur reply. My requirement is, I want to generate pdf file from the report output. so i wrote the following code which is taken from d2k documentation. Problem area has been highlighted in bold.
declare
run_rep varchar2(200);
rep_obj report_object;
rep_stat varchar2(20);
begin
rep_obj := find_report_object('report46');
run_rep := run_report_object(rep_obj);
rep_stat := report_object_status(run_rep);
if rep_stat = 'FINISHED' then
copy_report_object_output(run_rep, 'C:\Documents and Settings\trainee\Desktop\Icons\test.pdf');
else
message('error when running report');
end if;
end;
Report is running but while coming to report_object_status. complior shows error like "FRM-40738:Argument 1 to builtin REPORT_OBJECT_STATUS cannot be null". Parameter for report_object_status is null, i dont know y it is null because report is running. If report is running means,then there must be some values in run_rep.
why complior doesnt find the values from run_rep.......???
regards,
jame
Maybe you are looking for
-
Network trouble assigning static IP, dhcpcd works but not static.
I've tried static IP in rc.conf and assigning it manually. When I assign it manually, and my gateway route, it shows up with static but doesn't talk on network. Then I do a dhcpcd to the same NIC and viola, it gets assigned an IP on subnet I was sp
-
#Error & #Syntax when we are using merged dimension in BO4.1 SP3
Dear All, We are using BO4.1 SP3 and Bex query as datasource. When we are trying to take merged dimensions in Report block its giving #Syntax Error. When we are defining variable with merged dimension, its giving #Error message and the merged dimensi
-
ESS Business Package services in EP 7.0
This is a real simple query. I would like to know if the services of the ESS business package delivered in SAP EP 7.0 running on SAP Netweaver 7.0 are developed as Java or ABAP Web Dynpro. TIA, John
-
Low output when using Akai MPK49 controller
I'm completely new to Logic so I appreciate your taking the time to read this. When ever I add a software instrument track and use my Akai MPK49 controller to control the instrument, the meters show that I have plenty of signal coming in, but the out
-
How to disable http for JAX-WS
Hi everybody, I am facing the problem that I want only https (In the form of one-way-ssl) to be enabled for a web service. In other words, I want to disable the http part. For JAX-RPC there used to be the WLHttpsTransport annotation or ant element bu