RUN_REPORT_OBJECT and parameter list

Has anyone been able to get parameters ( user parameters) passed successfully to a report using
RUN_REPORT_OBJECT?
In my case the parameter list is build correctly in an oracle form (checked via degugger),
the name of the user parameter is the same in the form and report,
but the user parameter does not display on the report.
I have used the name of the user parameter as the source for the report text item.
Cheers

I have never used the run_report_object. I used run_product without any problem.

Similar Messages

Reports 6.0 and Parameter Lists and Generate to File

I am using the run_product built in from Forms 6.0 and opening
up a report passing it several parameters via a parameter list.
Everything works great when previewing the report.
There is the option in the report preview under File -> Generate
to File. When I generate a report to file using any type of
format it appears that the report does not use the parameters
that I passed in originally from the form. It appears that it
looses all the parameters I passed in. This is most concerning
to me. Am I doing something wrong or is this a "feature" I
didn't know about? I really would like users to have this
ability.
null

Yes I guess this will work, but the option to generate to file
is extremely misleading if you ask me. This option should
generate the current report with the current parameters. This
is unacceptable as far as I am concerned and should be
considered a bug. Oracle needs to give us more control over
FORMS and REPORTS into all too many situations I have been
frustrated because I am not able to do something that I want to
do.
I feel in general REPORTS object is very limited compared to
crystal reports....
Dan Paulsen (guest) wrote:
: Give the user the option on the calling form whether to save
the
: report to file or just view it. If they want to save to file,
: pass the parameter to save to file when you call the report
and
: suppress the parameter form, this will eliminate the problem.
: Spencer Tabbert (guest) wrote:
: : I am using the run_product built in from Forms 6.0 and
opening
: : up a report passing it several parameters via a parameter
: list.
: : Everything works great when previewing the report.
: : There is the option in the report preview under File ->
: Generate
: : to File. When I generate a report to file using any type of
: : format it appears that the report does not use the
parameters
: : that I passed in originally from the form. It appears that
it
: : looses all the parameters I passed in. This is most
: concerning
: : to me. Am I doing something wrong or is this a "feature" I
: : didn't know about? I really would like users to have this
: : ability.
null

How and where should I create a parameter list

Hi, I4m trying to create a parameter lists but I don4t know where and how.
I guess as a program unit but as function or procedure, sorry I4m new on this for that I4m finding this a bit difficult. Please, someone could help me to understand this:
PROCEDURE Run_Emp_Report IS
pl_id ParamList;
BEGIN
** Check to see if the 'tmpdata' parameter list exists.
pl_id := Get_Parameter_List('tmpdata');
** If it does, then delete it.
IF NOT Id_Null(pl_id) THEN
Destroy_Parameter_List( pl_id );
END IF;
** Create the 'tmpdata' parameter list afresh.
pl_id := Create_Parameter_List('tmpdata');
** Add a data parameter to this parameter list that will
** establish the relationship between the named query
** 'EMP_QUERY' in the report, and the record group named
** 'EMP_RECS' in the form.
Add_Parameter(pl_id,'EMP_QUERY',DATA_PARAMETER,'EMP_RECS');
**Pass a Parameter into PARAMFORM so that a parameter dialog
will not appear
**for the parameters being passing in.
Add_Parameter(pl_id, 'PARAMFORM', TEXT_PARAMETER, 'NO');
** Run the report synchronously, passing the parameter list
Run_Product(REPORTS, 'empreport', SYNCHRONOUS, RUNTIME,
FILESYSTEM, pl_id, NULL);
END;

Hi,
What you've pasted the code here is absolutely correct.
You'll have to write the code in Forms builder.
You can either paste the same code in a procedure & call that procedure
from button's When-Button-Pressed trigger or paste the code in
your button's When-Button-Pressed trigger like this :
DECLARE
pl_id ParamList;
BEGIN
** Check to see if the 'tmpdata' parameter list exists.
pl_id := Get_Parameter_List('tmpdata');
Run_Product(REPORTS, 'empreport', SYNCHRONOUS, RUNTIME,
FILESYSTEM, pl_id, NULL);
END;
However, don't write the code in a function as you will need to return some value from the function.
Thanks,
Mayur Shah
[email protected]

Im trying to share a project to idvd and gettingThe project could not be prepared for publishing because an error occurred. (Error in user parameter list) what does this mean

I've been trying to burn my projects in imovie to dvd's and i keep getting the forllowing error message "UNABLE TO PRPARE PROJECT FOR PUBLISHING"
"The Project could not be prepared for publishing because an error occured (Error in user parameter list)
Does anyone know why this is happening and what I can do to fix it?
Thanks!!

Can you give more details? What exactly is the entire error message text? there should be an error number too. Are you trying to finalize this to an external disk?

I made an IMovie project and I can't now make a DVD of it. A window says there are problems and that they are shown in the User Parameter List. I am at a loss. Don't know what to do. HELP

I have made an IMovie consisting of slides and some video. I cannot create a DVD with it. A window tells me there is a problem and that the problem is listed in the User parameters.....I am at a loss. There are hours of work in the Movie. Anyone have a thought? HELP

problem and that the problem is listed in the User parameters
Can it be
Error -50 paramErr Error in user parameter list
Can there be any external hard disks - if so How is/are it/they formatted ? Must be Mac OS Extended (hfs) if used for Video.
UNIX/DOS/FAT32/Mac OS Exchange - works for most but not for VIDEO.
What this means in Your situation is above me.
• free space on internal boot hard disk? How much ?
Video codec
• streamingDV, AIC etc. (not .avi, .mp4, .m4v, .wmv etc as they are containers not codecs)
Pictures
• in what format ? .jpg, .bmp, .tif, else ?
Audio
• from where/what format ? iTunes, .avi, .mp3, .aiff, else ?
The "com.apple.iMovie.plist" file
Many users has not observed that there are TWO libraries.
• Library - at root level
• Library - in user/account folder - THIS IS THE ONE to look into
from Luke Burns
I fixed the problem.. but it was very, very strange. I had a very long section for credits and set the line spacing to 1.0.. for some reason this caused it. I removed it, and it worked fine. I put it back, and I couldn't preview or play the video.
I don't know why that could cause that big of a problem, but it did..
Klaus1
You need more free space on your hard drive.
jonorparkerjon
After phone support from apple I ended up creating a new project and adding all 117 clips back in individually till I found out what clips flagged and would not allow me to export. I had 3 I deleted and replaced and everything works now 1hr after tedious work....
Where do Your material come from
• Camera
• External hard disk
• USB-memory
And all are connected so that iMovie can find it ?
Yours Bengt W

I am trying to finalize a movie project and I get an "error in user parameter list" message. What does that mean, and how can I fix it?

I am trying to finalize a movie project and I get an "error in user parameter list" message. What does that mean, and how can I fix it?

what movie editing software are you using?

Open_form with parameter list and execute_query

Hello all.
In a 6i form WBPressed trigger creates the parameter list
begin
    v_paramlist_id := create_parameter_list('FRM_PARM_LIST');
    add_parameter('FRM_PARM_LIST', 'P_CUST_NUM', TEXT_PARAMETER,
                   to_char(:CUSTOMER_INFO.CUST_NUM));
    open_form('CUSTOM_SCORING', ACTIVATE, SESSION,
                     NO_SHARE_LIBRARY_DATA, 'FRM_PARM_LIST');
   destroy_parameter_list('FRM_PARM_LIST');
end;Then in the second form, WNFInstance trigger has:
    if :PARAMETER.P_CUST_NUM is not null
     then
     GET_PARAMETER_ATTR('FRM_PARM_LIST', 'P_CUST_NUM', x, v_cust_num);
     set_block_property('CUST_SCORING', DEFAULT_WHERE,
                     'CUST_NUM = to_number('||v_cust_num||')');
     go_item('cust_scoring.cust_num');
     do_key('execute_query');I get FRM-40505 Unable to perform query. It was working, but I broke it along the way. Does this much seem correct to open the second form and query the specific customer?
Upon opening the second form in the Developer tool, it cannot locate a custom Object Library called PARAMETERS. I deleted it & drug it in again from the original (sub-classed). Sould I do the entire library?
Thanks.

Hey - I think I see the problem today.. (fresh set of eyes)
open_form('CUSTOM_SCORING', ACTIVATE, SESSION,
NO_SHARE_LIBRARY_DATA, 'FRM_PARM_LIST');
Change this to
open_form('CUSTOM_SCORING', ACTIVATE, SESSION,
NO_SHARE_LIBRARY_DATA, v_paramlist_id );
Hello all.
In a 6i form WBPressed trigger creates the parameter
list
begin
v_paramlist_id :=
:= create_parameter_list('FRM_PARM_LIST');
add_parameter('FRM_PARM_LIST', 'P_CUST_NUM',
UM', TEXT_PARAMETER,
                   to_char(:CUSTOMER_INFO.CUST_NUM));
open_form('CUSTOM_SCORING', ACTIVATE, SESSION,
ION,
NO_SHARE_LIBRARY_DATA,
O_SHARE_LIBRARY_DATA, 'FRM_PARM_LIST');
destroy_parameter_list('FRM_PARM_LIST');
end;Then in the second form, WNFInstance trigger has:
if :PARAMETER.P_CUST_NUM is not null
     then
GET_PARAMETER_ATTR('FRM_PARM_LIST', 'P_CUST_NUM', x,
, v_cust_num);
     set_block_property('CUST_SCORING', DEFAULT_WHERE,
                     'CUST_NUM = to_number('||v_cust_num||')');
     go_item('cust_scoring.cust_num');
     do_key('execute_query');I get FRM-40505 Unable to perform query. It was
working, but I broke it along the way. Does this
much seem correct to open the second form and query
the specific customer?
Upon opening the second form in the Developer tool,
it cannot locate a custom Object Library called
PARAMETERS. I deleted it & drug it in again from the
original (sub-classed). Sould I do the entire
library?
Thanks.

Dynamic Parameter List questions: Length and Custom Values

I've got a Crystal Report that I want to use Dynamic Values for.
Right now... this report is simply a "SELECT stuff FROM table" SQL query... with a parameter that the report uses to filter.
I use a "Select DISTINCT value from table" to generate a list of values. I put those values into a txt. I then import the text into a static list. This creates a parameter list that is 11 "pages" long on the parameter screen. I also have "custom" values allowed. This is to allow for "new" values and also allow not needing to browse 11 pages for one or two known values.
If I turn the parameter into a Dynamic List based on the same Select statement it stops at 5 pages, obviously cutting off half of the possible values.
Dynamic List also removes the ability to do Custom Values. The filter option wouldn't be a bad alternative BUT it don't work for pages 6+ that aren't there.
How can I remove the 5 page limit (or whatever it is) for Dynamic values?
Thanks
Chris
Edited by: WernerCD on Aug 4, 2010 4:14 PM

There is a limit of 1000 records in dynamic parameters. You can change this by adding a registry value:
registry key : HKEY_CURRENT_USER\SOFTWARE\Business Objects\Suite 11.0\Crystal Reports\DatabaseOptions\LOV
and then add a key called MaxRowsetRecords and give it a value.
if you have Crystal 2008 then the above registry folder will say Suite 12.0.

What is the parameter list and why does it keep on coming up?

What is the parameter list and why does it keep on coming up when I try to finalize the video or share it?

Hi
I try to finalize the video or share it?
How do You do that and to what do You Share it ?
Yours Bengt W

11g Upgrade - removal and new parameter list queries

Hi All,
We are planning to upgrade the 10.2.0.4 E Business suite (11.5.10.2. ) database to 11.2.0.1.
We have few removal and new parameter list in 11g database based on the note 216205.1
We will be having the compatible mode as 10.2.0 before and after the upgrade until the system gets stable. So until we change the compatible to 11.2.0, do we need to have the parameters in the removal list or we can remove that even if we have the compatible as 10.2.0 during the upgrade.
There are also two new parameters optimizerautostats_job=false and sec_case_sensitive_logon = FALSE.
Please let us know if we can have these new /removal parameter changes when we have the compatible as 10.2.0 in 11g database.
Thanks & Regards,
Rakesh

Rakesh,
Please let us know if we can have these new /removal parameter changes when we have the compatible as 10.2.0 in 11g database.You can have those parameters, and you can remove it later once you are done with the upgrade.
Note: 881505.1 - Oracle Applications Release 11i with Oracle 11g Release 2
Adjust the Initialization Parameter File for the New Release
http://download.oracle.com/docs/cd/E11882_01/server.112/e10819/afterup.htm#CEGHAAFH
Thanks,
Hussein

What is a user parameter list in iMovie? I am trying to sent the movie from imovie to idvd and I keep getting an error with the user parameter list. Help?

What is a user parameter list in iMovie? I am trying to sent the movie from imovie to idvd and I keep getting an error with the user parameter list. Help?

Can you give more details? What exactly is the entire error message text? there should be an error number too. Are you trying to finalize this to an external disk?

Parameter list and prompt restricted to 50 items

Hi,
Is there a way to increase the restriction of the parameter list(LOV) to more than 50 items?
Regards,
Robert

Hi
U can configure more than 50 values by changing the RecordsLimitForValueBrowser configuration setting in
C:\OracleBAM\BAM\web.config,. and after that restart all the BAM services and Microsoft IIS.

I was working on numerous songs in Logic Pro 9, and for some reason 2 of the songs would not bounce. I get an error message: Error in parameter list / Not an existing volume, and no default volume / Bad positioning information / Bad drive number

I was doing some minor editing in Logic Pro 9.1.8, like adding some plug-ins to audio and midi tracks on numerous songs. Most of the songs I had no problem bouncing. For some reason 2 of the songs I tried to bounce kept showing me this error message:
"Error in parameter list / Not an existing volume, and no default volume / Bad positioning information / Bad drive number" result code=-50.
The songs open and play fine, but won't let me bounce. I've worked with Logic for a few years and this has never happened. Any suggestions?
Thanks,
Johnny

Fixed! Ran disk utilities and repaired my external HD.

How can I to recover and to use a parameter list in Report6i

I am working with Report6i and Forms6i.
I know how to create a parameter list and how to call Reports 6i with RUN_PRODUCT(...)
but I don't know how to recover the parameter list in Reports6i and how recover each parameter.
Can you help me?
Excuse my English. It's horrible.
Thanks
Isidre

Hi Isidre,
You need to create user parameters in the report, one for each parameter value that you want to pass into the report. Make sure you set the data type and length for each user parameter, and also the default value if you don't pass in a value for that parameter.
regards,
Stewart

Most urgent:::: passing parameter list to reports containing record groups

hi
can any one help me , i am getting frm-41214 when i pass a paramter list containing record group as data parameter to run_report_object as parameter, calling report from forms 10g, but when i dont pass the parameter list the report runs displaying no data(as it should do), otherwise it dont run and display the frm-41214
zulfiqar

Hi!
To suppress Oracle Reports native Parameter Form just add:
add_parameter( pl_id, 'pARAMform', text_parameter, 'NO' );
Andrew Velichko
Brainbench MVP for Oracle Developer 2000 http://www.brainbench.com
null

RUN_REPORT_OBJECT and parameter list

Similar Messages

Maybe you are looking for