Run Reporting services 2005 with databases housed on SQL Server 2012?

Hi, I have a RS 2005 install in which the ReportServer and ReportServerTempDB databases reside on a different SQL Server 2005 server. I am planning to upgrade DB server to 2012 and would like to keep SSRS as 2005.As a second phase I will upgrade SSRS2005
to SSRS 2008. So I would be running something like this:
Server A: SQL 2005 Reporting Services
Server B: SQL 2012 database engine - housing ReportServer and ReportServerTempDB
Is this configuration supported?

Hello,
According to the
BOL, Report Server service checks the database version at startup. If the report server is connected to a database that is an earlier version, the report server will update the database during startup.If you have a newer report server database, you
cannot use it with an earlier version of a report server instances.
In that case, the earlier versions of SQL Server Database Engine that can be used to host the SSRS report server databases. For example, In SQL Server 2005 Reporting Services, we can use either SQL Server 2000 or SQL Server 2005 to host the databases, for
SSRS 2012, we can use SQL Server 2012,2008 R2,2008,2005.
Based on my test, In the Reporting Services 2005 Configure Manager, we can create a new database on a remote SQL Server 2012 database engine and the Initialization is successful.
In this way, the databases are created from the script file which installed with the Reporting Services instance, you can find the Catalog.sql and CatalogTempDB.sql under folder C:\Program Files\Microsoft SQL Server\MSSQL.3\Reporting Services\ReportServer.
However, when upgrade the existing ReportServer database and ReportServerTempDB database on the SQL Server 2012 by restore from a backup, we cannot use this existing database for Reporting Services 2005 and get the following message:
The database version (162) does not match your reporting serivces installation.And the initialization failed.
In your case, you can host the ReportServer database and ReportServerTempDB database of SSRS 2005 on SQL Server 2012 database enginer by create a new database from Reporting Services 2005 Configure Manager. But you cannot use the existing
database which upgrade to SQL Server 2012.
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support

Similar Messages

SQL Server 2005 performance decreases with DB size while SQL Server 2012 is fine

Hi,
We have a C# windows service running that polls some files and inserts/updates some fields in database.
The service was tested on a local dev machine with SQL Server 2012 running and performance was quite decent with any number of records. Later on the service was moved to a test stage environment where SQL Server 2005 is installed. At that point database
was still empty and service was running just fine but later on, after some 500k records were written, performance problems came to light. After some more tests we've founds out that, basically, database operation performance in SQL Server 2005 decreases with
a direct correlation with the database size. Here are some testing results:
Run#
1
2
3
4
5
DB size (records)
520k
620k
720k
820k
920k
SQL Server 2005
TotalRunTime
25:25.1
32:25.4
38:27.3
42:50.5
43:51.8
Get1
00:18.3
00:18.9
00:20.1
00:20.1
00:19.3
Get2
01:13.4
01:17.9
01:21.0
01:21.2
01:17.5
Get3
01:19.5
01:24.6
01:28.4
01:29.3
01:24.8
Count1
00:19.9
00:18.7
00:17.9
00:18.7
00:19.1
Count2
00:44.5
00:45.7
00:45.9
00:47.0
00:46.0
Count3
00:21.7
00:21.7
00:21.7
00:22.3
00:22.3
Count4
00:23.6
00:23.9
00:23.9
00:24.9
00:24.5
Process1
03:10.6
03:15.4
03:14.7
03:21.5
03:19.6
Process2
17:08.7
23:35.7
28:53.8
32:58.3
34:46.9
Count5
00:02.3
00:02.3
00:02.3
00:02.3
00:02.1
Count6
00:01.6
00:01.6
00:01.6
00:01.7
00:01.7
Count7
00:01.9
00:01.9
00:01.7
00:02.0
00:02.0
Process3
00:02.0
00:01.8
00:01.8
00:01.8
00:01.8
SQL Server 2012
TotalRunTime
12:51.6
13:38.7
13:20.4
13:38.0
12:38.8
Get1
00:21.6
00:21.7
00:20.7
00:22.7
00:21.4
Get2
01:38.3
01:37.2
01:31.6
01:39.2
01:37.3
Get3
01:41.7
01:42.1
01:35.9
01:44.5
01:41.7
Count1
00:20.3
00:19.9
00:19.9
00:21.5
00:17.3
Count2
01:04.5
01:04.8
01:05.3
01:10.0
01:01.0
Count3
00:24.5
00:24.1
00:23.7
00:26.0
00:21.7
Count4
00:26.3
00:24.6
00:25.1
00:27.5
00:23.7
Process1
03:52.3
03:57.7
03:59.4
04:21.2
03:41.4
Process2
03:05.4
03:06.2
02:53.2
03:10.3
03:06.5
Count5
00:02.8
00:02.7
00:02.6
00:02.8
00:02.7
Count6
00:02.3
00:03.0
00:02.8
00:03.4
00:02.4
Count7
00:02.5
00:02.9
00:02.8
00:03.4
00:02.5
Process3
00:21.7
00:21.0
00:20.4
00:22.8
00:21.5
One more thing is that it's not Process2 table that constantly grows in size but is Process1 table, that gets almost 100k records each run.
After that SQL Server 2005 has also been installed on a dev machine just to test things and we got exactly the same results. Both SQL Server 2005 and 2012 instances are installed using default settings with no changes at all. The same goes for databases
created for the service.
So the question is - why are there such huge differences between performance of SQL Server 2005 and 2012? Maybe there are some settings that are set by default in SQL Server 2012 database that need to be set manually in 2005?
What else can I try to test? The main problem is that production SQL Server will be updated god-knows-when and we can't just wait for that.
Any suggestions/advices are more than welcome.

...One more thing is that it's not Process2 table that constantly grows in size but is
Process1 table, that gets almost 100k records each run....
Hi,
It is not clear to me what is that you are doing, but now we have a better understanding on ONE of your tables an it is obviously you will get worse result as the data become bigger. Actually your table look like a automatic build table by ORM like Entity
Framework, and it's DDL probably do not much your needs. For example if your select query is using a filter on the other column that [setID] then you have no index and the server probably have to scan the entire table in order to find the records that you
need.
Forum is a suitable place to seek advice about a specific system (as I mentioned before we are not familiar with your system), and it is more suitable for general questions. For example the fact that you have no index except the index on the column [setID]
can indicate a problem. Ultimately to optimize the system will need to investigate it more thoroughly (as it is no longer appropriate forum ... but we're not there yet). Another point is that now we can see that you are using [timestamp] column, an this
implies that your are using this column as a filter for selecting the data. If so, then maybe a better DDL will be to use clustered index on this column and if needed a nonclustered index on the [setID] if it is needed at all...
what is obviously is that next is to check if this DDL fit
your specific needs (as i mentioned before).
Next step is to understand what action do you do with this table. (1) what is your query which become slowly in a bigger data set. (2) Are you using ORM (object relational mapping, like Entity Framework
code first), and if so then which one.
[Personal Site] [Blog] [Facebook]

Services of 2nd instance disappearded from SQL Server 2012 Configuration Manager but still running

We recently configured multiple SQL Server 2012 R1 (two-node) clusters. Some with two instances. However, we discovered later that the Configuration Manager only lists the services of the 1st instance (the default MSSQLSERVER instance). The other named instance
is still running and can be failed over from one node to the other using Cluster Failover Manager but the services are not showing up in Configuration Manager in any of the two nodes.
Any thoughts as to why we see this odd behavior and how to fix it? We have done two instances before in SQL Server 2008 R2 but never saw this behavior.
Thanks,
Omer

Please see my answer above about the SQLCM version. We use the highest.
As I said before that this happens only when we have two instances running in a SQL2012 cluster. We configured 7 SQL 2012 clusters. three of them have two instances but only the services of one instance are displayed in CM. Services of the default instance
are listed in two of these clusters while services of the named instance are listed in the 3rd one.
One thing to note about these configurations is that the installer could not bring the services at the end of installation online because it did not have permission to create the computer objects in AD during setup thus we had to follow a known workaround
that involves having the domain admin fix these permissions and then we were able to add the SQL Agent Service to the cluster and bring the services online after modifying the ConfigurationState key value of each instance in the registry.
The installer account is setup as a local admin and we asked the domain admin to give it "Read All properties" and "create computer objects" in AD but for some reason it does not seem to have the ability to create these computer objects during installation
and the objects are to be pre-created and their permissions reset afterward.
I am giving this information and I am not sure if it has anything to do with the fact that SQLCM is listing the services of one instance and not the other.

SSIS modules created with VS2013 fail on SQL Server 2012

HI all,
i've just installed SQL Server 2012, VS 2013 (Premium) and SQL Server Data Tools (SSDTBI_VS2012_x86_ENU) on my local workstation (running Win7 x64).
Creating and debugging of new SSIS modules works well, while execution of the module using DTEXEC fails with:
   Description: Package migration from version 8 to version 6 failed with error 0xC001700A "The version number in the package is not valid. The version number cannot be greater than current version number.".
How to create SSIS modules with VS2013, which are executable on SQL Server 2012?
Any help is appreciated!
Thank you in advance!
Details:
D:\tmp>dtexec /f Package_by_vs2013.dtsx
Microsoft (R) SQL Server Execute Package Utility
Version 11.0.2100.60 for 64-bit
Copyright (C) Microsoft Corporation. All rights reserved.
Started: 12:48:51
Error: 2014-04-09 12:48:52.69
   Code: 0xC001F02A
   Source: Package
   Description: Cannot create a task from XML for task "Execute SQL Task", type "Microsoft.ExecuteSQLTask" due to error 0x80070057 "Falscher Parameter.".
End Error
Error: 2014-04-09 12:48:52.69
   Code: 0xC0010018
   Source: Execute SQL Task
   Description: Failed to load task "Execute SQL Task", type "". The contact information for this task is "Execute SQL Task; Microsoft Corporation; SQL Server 2
014; ? 2014 Microsoft Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1".
End Error
Error: 2014-04-09 12:48:52.72
   Code: 0xC0010026
   Source: Execute SQL Task
   Description: The task has failed to load. The contact information for this task is "Execute SQL Task; Microsoft Corporation; SQL Server 2014; ? 2014 Microsof
t Corporation; All Rights Reserved;http://www.microsoft.com/sql/support/default.asp;1".
End Error
Error: 2014-04-09 12:48:52.72
   Code: 0xC0024107
   Source: Execute SQL Task
   Description: There were errors during task validation.
End Error
Error: 2014-04-09 12:48:52.72
   Code: 0xC0010025
   Source: Package
   Description: The package cannot execute because it contains tasks that failed to load.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 12:48:51
Finished: 12:48:52
Elapsed: 1.123 seconds

Hi,
I have moved this thread to
SQL Server Integration Services forum for better support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Missing access for databases on MS SQL server 2012 database engine

Hi, i have trouble with my MS SQL server 2012 database engine.
I can't access to all databases on server by error:
"Cannot resolve the collation conflict between "SQL_Latin1_General_CP1_CI_AS" and "Cyrillic_General_CI_AS" in the equal to operation"
If i will change collation to Cyrillic_General_CI_AS, then all db would delete from server.

AFAIK, this error message thrown on the query level and can be easily resolved..
SELECT <columns> FROM Orders O JOIN Customers C
ON O.CustomerName=C.CustomerName COLLATE database_default
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Migrate biztalk 2006R2/SQL server 2005 projects to Biztalk 2013/SQL server 2012

We have Biztalk application projects deployed on Biztalk 2006R2/SQL server 2005 environment on a single server
Now we have installed and configured Biztalk 2013/SQL server 2012 in a multicomputer environment where Biztalk server is on one computer while SQL server is on the other.
Now it's time to migrate the projects 2006R2 to 2013.. Is it a smooth process? I found a lot of posts about migration from 2006R2 to Biztalk 2010... Just wondering if it is similar or more complex?? Appreciate any help/suggestions.. thanks!!

Hi Annee,
Following article should answer your question:
BizTalk Application Migration Guide
Also have a look at following forum post:
http://social.msdn.microsoft.com/Forums/en-US/f9ac6b6c-3dbe-487b-85c5-448d257d62f4/migration-from-biztalk-server-2006-to-2013?forum=biztalkgeneral
Maheshkumar S. Tiwari|http://tech-findings.blogspot.in/

Help to resolve error in sending database email from SQL Server 2012.

Please help to resolve error in sending email from SQL Server 2012.
SQL Instance Version:
Microsoft SQL Server 2012 (SP1) - 11.0.3449.0 (X64)
Jun 29 2014 23:15:18
Copyright (c) Microsoft Corporation
Enterprise Edition: Core-based Licensing (64-bit) on Windows NT 6.3 <X64> (Build 9600: )
Error Message: Error MeThe mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2015-01-15T19:48:25). Exception Message:
Cannot send mails to mail server. (The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.7.1 Client was not authenticated).)

The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.7.1
Client was not authenticated).
I think the error message is pretty clear, you have to setup authentication for the SMTP connection in Database Mail, see
Database Mail Configuration Objects
Olaf Helper
[ Blog] [ Xing] [ MVP]

Problem with "Database Gateway for SQL Server"

Hello,
i am testing the different technologies for connecting an oracle database with a sql-server database.
The way using 10g-generic-connectivity with ODBC works fine, but the 11g-DG4MSQL makes problems.
Environment:
Server PEGASUS (32bit Windows Server 2003 R2 SP2) with Oracle Database 10g Release 10.2.0.4.0
Server OBELIXUS (32bit Windows 2000 Sp4) with MS-SQL-Server 2005
On PEGASUS i have installed the gateway in a new oracle home directory:
"D:\oracle\product\10.2.0\db_1" => home directory of 10g
"D:\oracle\product\11.1.0\tg_1\" => home directory of the gateway
D:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\tnsnames.ora:
MSSQLDG =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = PEGASUS)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = DG4MSQL)
(HS = OK)
MSSQL =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = PEGASUS)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = MSSQLTEST)
(HS = OK)
D:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\listener.ora:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = INTEGRAT)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(SID_NAME = INTEGRAT)
(SID_DESC =
(SID_NAME = MSSQLTEST)
(PROGRAM = D:\oracle\product\10.2.0\db_1\bin\hsodbc)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(SID_DESC=
(SID_NAME=DG4MSQL)
(ORACLE_HOME=D:\oracle\product\11.1.0\tg_1)
(PROGRAM=D:\oracle\product\11.1.0\tg_1\BIN\dg4msql)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = pegasus.cursor.de)(PORT = 1521))
D:\oracle\product\11.1.0\tg_1\dg4msql\admin\initDG4MSQL.ora:
HS_FDS_CONNECT_INFO=OBELIXUS/MSSQLSERVER/testuju
HS_FDS_TRACE_LEVEL=DEBUG
HS_FDS_RECOVERY_ACCOUNT=RECOVER
HS_FDS_RECOVERY_PWD=RECOVER
D:\oracle\product\10.2.0\db_1\hs\admin\initMSSQLTEST.ora:
HS_FDS_CONNECT_INFO=DSN_MSSQL
HS_FDS_TRACE_LEVEL=OFF
HS_LANGUAGE=AMERICAN_AMERICA.WE8MSWIN1252
HS_FDS_FETCH_ROWS=100
HS_RPC_FETCH_REBLOCKING=OFF
How mentioned above, the access from oracle to sqlserver using MSSQL(10g hsodbc.exe) works fine.
But when trying to acces the sqlserver using MSSQLDG (11g dg4msql.exe) I get the following error:
ORA-28500: Verbindung von ORACLE zu Fremdsystem gab diese Nachricht zurück:
[Oracle][ODBC SQL Server Driver][DBNETLIB]Ungültige Verbindung.
[Oracle][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (ParseConnectParams()).
[Oracle][ODBC SQL Server Driver]Ungültiges Attribut für die Verbindungszeichenfolge
ORA-02063: vorherige 2 lines von DBL_MSSQL4
Here the contect of the file "DG4MSQL_agt_2332.trc":
Oracle Corporation --- FREITAG AUG 22 2008 16:17:42.198
Heterogeneous Agent Release
11.1.0.6.0
Oracle Corporation --- FREITAG AUG 22 2008 16:17:42.198
Version 11.1.0.6.0
Entered hgogprd
HOSGIP for "HS_FDS_TRACE_LEVEL" returned "DEBUG"
Entered hgosdip
setting HS_OPEN_CURSORS to default of 50
HOSGIP returned value of "RECOVER" for HS_FDS_RECOVERY_ACCOUNT
HOSGIP returned a value for HS_FDS_RECOVERY_PWD
setting HS_FDS_TRANSACTION_LOG to default of "HS_TRANSACTION_LOG"
setting HS_FDS_TRANSACTION_ISOLATION to default of "READ_COMMITTED"
setting HS_NLS_NCHAR to default of "AL16UTF16"
setting HS_FDS_TIMESTAMP_AS_DATE to default of "TRUE"
setting HS_RPC_FETCH_REBLOCKING to default of "ON"
setting HS_FDS_FETCH_ROWS to default of "100"
setting HS_FDS_RESULTSET_SUPPORT to default of "FALSE"
setting HS_FDS_PROC_IS_FUNC to default of "FALSE"
setting HS_FDS_CHARACTER_SEMANTICS to default of "FALSE"
setting HS_FDS_MAP_NCHAR to default of "TRUE"
setting HS_NLS_DATE_FORMAT to default of "YYYY-MM-DD HH24:MI:SS"
setting HS_FDS_REPORT_REAL_AS_DOUBLE to default of "FALSE"
setting HS_LONG_PIECE_TRANSFER_SIZE to default of "65536"
setting HS_SQL_HANDLE_STMT_REUSE to default of "FALSE"
setting HS_FDS_QUERY_DRIVER to default of "FALSE"
setting HS_CALL_NAME_ISP to "gtw$:SQLTables;gtw$:SQLColumns;gtw$:SQLPrimaryKeys;gtw$:SQLForeignKeys;gtw$:SQLProcedures;gtw$:SQLStatistics"
Exiting hgosdip, rc=0
ORACLE_SID is "DG4MSQL"
Product-Info:
Port Rls/Upd:6/0 PrdStat:0
Agent:Oracle Database Gateway for MSSQL
Facility:hsa
Class:MSSQL, ClassVsn:11.1.0.6.0_0006, Instance:DG4MSQL
Exiting hgogprd, rc=0
Entered hgoinit
HOCXU_COMP_CSET=1
HOCXU_DRV_CSET=178
HOCXU_DRV_NCHAR=2000
HOCXU_DB_CSET=178
HOCXU_SEM_VER=102000
Entered hgolofn at 2008/08/22-16:17:42
RC=-1 from HOSGIP for "PATH"
PATH from environment is "d:\oracle\product\11.1.0\tg_1\bin;D:\oracle\product\10.2.0\db_1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Programme\IBM\Informix\Client-SDK\bin"
Exiting hgolofn, rc=0 at 2008/08/22-16:17:43
HOSGIP for "HS_OPEN_CURSORS" returned "50"
HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
Exiting hgoinit, rc=0 at 2008/08/22-16:17:43
Entered hgolgon at 2008/08/22-16:17:43
reco:0, name:testuju, tflag:0
Entered hgosuec at 2008/08/22-16:17:43
uencoding=UTF16
Entered shgosuec at 2008/08/22-16:17:43
Exiting shgosuec, rc=0 at 2008/08/22-16:17:43
shgosuec() returned rc=0
Exiting hgosuec, rc=0 at 2008/08/22-16:17:43
HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
HOSGIP for "HS_FDS_TRANSACTION_LOG" returned ""HS_TRANSACTION_LOG""
HOSGIP for "HS_FDS_TIMESTAMP_AS_DATE" returned "TRUE"
HOSGIP for "HS_FDS_CHARACTER_SEMANTICS" returned "FALSE"
HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
HOSGIP for "HS_FDS_RESULT_SET_SUPPORT" returned "FALSE"
HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
using testuju as default value for "HS_FDS_DEFAULT_OWNER"
HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
Entered hgocont at 2008/08/22-16:17:43
HS_FDS_CONNECT_INFO = "OBELIXUS/MSSQLSERVER/testuju"
RC=-1 from HOSGIP for "HS_FDS_CONNECT_STRING"
Entered hgogenconstr at 2008/08/22-16:17:43
dsn:OBELIXUS/MSSQLSERVER/testuju, name:testuju
optn:
Entered shgogohn at 2008/08/22-16:17:43
ohn is 'OraGtw11g_home1'
Exiting shgogohn, rc=0 at 2008/08/22-16:17:43
Entered hgocont_OracleCsidToIANA at 2008/08/22-16:17:43
Returning 2252
Exiting hgocont_OracleCsidToIANA at 2008/08/22-16:17:43
##>Connect Parameters (len=223)<##
## DRIVER=Oracle 11g dg4msql-OraGtw11g_home1;
## SERVER=OBELIXUS\MSSQLSERVER;
## Database=testuju;
#! UID=testuju;
#! PWD=*
## AnsiNPW=Yes;
## QuotedId=Yes;
## IANAAppCodePage=2252;
## ArraySize=100;
## PadVarbinary=0;
## SupportNumericPrecisionGreaterThan38=1;
Exiting hgogenconstr, rc=0 at 2008/08/22-16:17:44
Entered hgopoer at 2008/08/22-16:18:00
hgopoer, line 159: got native error 14 and sqlstate 08001; message follows...
[Oracle][ODBC SQL Server Driver][DBNETLIB]Ungültige Verbindung.[Oracle][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (ParseConnectParams()).[Oracle][ODBC SQL Server Driver]Ungültiges Attribut für die Verbindungszeichenfolge
Exiting hgopoer, rc=0 at 2008/08/22-16:18:00
hgocont, line 1890: calling SqlDriverConnect got sqlstate 08001
Exiting hgocont, rc=28500 at 2008/08/22-16:18:00 with error ptr FILE:hgocont.c LINE:1910 ID:Something other than invalid authorization
Exiting hgolgon, rc=28500 at 2008/08/22-16:18:00 with error ptr FILE:hgolgon.c LINE:612 ID:Calling hgocont
Entered hgoexit at 2008/08/22-16:18:00
Exiting hgoexit, rc=0 at 2008/08/22-16:18:00
Many thanks in advance for any help!
Regards Hartmut

At first your configuration is not really correct.
=====================================================
In the LISTENER.ORA from 10g, you must only refer to the database and hsodbc 10g
D:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\listener.ora:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
(SID_DESC =
(GLOBAL_DBNAME = INTEGRAT)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
(SID_NAME = INTEGRAT)
(SID_DESC =
(SID_NAME = MSSQLTEST)
(PROGRAM = D:\oracle\product\10.2.0\db_1\bin\hsodbc)
(ORACLE_HOME = D:\oracle\product\10.2.0\db_1)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = pegasus.cursor.de)(PORT = 1521))
===========================================================
Then you have to create a new listener (new name) in the gateway oracle_home on a different port than instance database:
D:\oracle\product\11.1.0\tg_1\network\admin\listener.ora
SID_LIST_LISTENERGTW =
(SID_LIST =
(SID_DESC=
(SID_NAME=DG4MSQL)
(ORACLE_HOME=D:\oracle\product\11.1.0\tg_1)
(PROGRAM=D:\oracle\product\11.1.0\tg_1\BIN\dg4msql)
LISTENERGTW=
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = pegasus.cursor.de)(PORT = 1522))
To start it, use the command below:
D:\oracle\product\11.1.0\tg_1\bin\LSNRCTL start listenergtw
===========================================================
D:\oracle\product\10.2.0\db_1\NETWORK\ADMIN\tnsnames.ora:
match the DG4MSQL with the listener on 1522 port
HSODBC match with binary10g on listener 1521 port
MSSQLDG =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = PEGASUS)(PORT = 1522))
(CONNECT_DATA =(SERVICE_NAME = DG4MSQL))
(HS = OK)
MSSQL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = PEGASUS)(PORT = 1521))
(CONNECT_DATA =(SERVICE_NAME = MSSQLTEST))
(HS = OK)
Try to configure and let me know your feedback
regards,
Mireille

Trying to make Reporting Services Configuration Manager work. Or, SQL Server Reporting Services.

Under Start > Programs > Microsoft SQL Server 2008, I have the following:
SQL Server Management Studio
Configuration Tools
Integration Services
Import and Export Data
Under Configuration Tools, I have the following:
SQL Server Installation Center
SQL Server Configuration Manager
SQL Server Error and Usage Reporting
Reporting Services Configuration Manager
I tried to enable Reporting Services through 'Reporting Services Configuration Manager' but I don't seem to have much control from this view. I see two boxes, one named Server Name (and it shows my server name) and the other is named Report Servicer Instance (and this is grayed out). If I click on the Find box next to Server Name, I get this message:
Report Server WMI Provider Error: Invalid Namespace
Details
Invalid Namespace
To get the Server Name I right-clicked SQL Server > Properties > General
Any ideas on how to make Reporting Services Configuration Manager work? Or, can you please give me more details on how to access "System control" => "Services"? I'm not seeing it anywhere and I'm not seeing any way to find "Sql Server Reporting Services". Basically, I'm trying to activate my SQL Server Reporting Services.
I am using SQL Server 2008 Express Management Studio. Is SQL Server Reporting Services included in Express Management Studio? I read, online, that it is, but I can't find it anywhere.
Thanks again!
Ryan--
<input id="gwProxy" type="hidden"></input> <input id="jsProxy" onclick="jsCall();" type="hidden" />

Thanks Jerry Nee!! This may be exactly what I’m looking for! I went to this link:
http://www.microsoft.com/downloads/details.aspx?FamilyID=B5D1B8C3-FDA5-4508-B0D0-1311D670E336&displaylang=en#filelist
At the top of the page it says, ‘Microsoft® SQL Server® 2008 Express with Advanced Services’, which seems like this is what I’m looking for, so I downloaded the file named ‘SQLEXPRADV_x86_ENU.exe’
Then, I cut that from my desktop and pasted it in my C-drive and I get a message that says, ‘this folder already contains a file named ‘SQLEXPRADV_x86_ENU.exe’, would you like to replace the existing file?’
I’m thinking…what the heck? Do I already have this thing? If so, why can’t I see SQL Server Reporting Services? Maybe I have it now, and I just don’t know how to access the reporting Services features…
Couple quick questions:
What’s the difference b/w these two files:
‘SQLEXPRADV_x64_ENU.exe’ and ‘SQLEXPRADV_x86_ENU.exe’?
Also, my current version of SSMS, Help > About shows this:
Microsoft SQL Server Management Studio
10.0.1600.22 ((SQL_PreRelease).080709-1414 )
Microsoft Data Access Components (MDAC)
2000.085.1132.00 (xpsp.080413-0852)
Microsoft MSXML
2.6 3.0 5.0 6.0
Microsoft Internet Explorer
8.0.6001.18702
Microsoft .NET Framework
2.0.50727.3603
Operating System
5.1.2600
Should Server Reporting Services be included in this version? I think so!!!
Under Start > Programs > Microsoft SQL Server 2008 > Configuration Tools > Reporting Services Configuration Manager, I see this:
Connect to a report server instance:
Server Name:
Report Server Instance:
My server name is ‘'EXCEL-4J2W8KYNP', which I got from Control Panel > System Properties > Computer Name > Full Computer Name;
However, when I put that server name in the box, and hit ‘Find’ I get this message: ‘Report Server WMI Provider error’ Invalid namespace
Details: Invalid Namespace.
I have no idea what this means…
Thanks for everything!
Ryan---

New Dell Server with OpenManage Essentials adds SQL Server 2012 Native Client to existing SQL Server 2008R2 in SBS 2011

Had to upgrade my server to new Dell T320. Support wanted me to install OpenManage Essentials which unfortunately installed SQL Server 2912 native client. Now I have 2 sqlserv apps running at the same time.
Is there a problem with SBS 2011 Standard running two different SQL Server native clients?
I have no idea why Dell OpenManage did not use the existing 2008R2 native client, but that is the way it is.
Can I combine or upgrade the database so they all use one and not both?
Thanks
Gerald Fay

Hi,
I have asked some who similar the SQL product, in general you can install the different version SQL client on the same operation system, but when the OpenManage Essentials
install a SQL instance on your SQL server, it will automatic upgrade same SQL component to the newer version.
For example, if your SQL server is 2008r2, you install the OpenManage Essentials built-in SQL instance which version is higher(such as 2012), by default it will automatic
upgrade the same SQL component to SQL 2012, I don’t similar with the OpenManage Essentials
tool, I think you can ask DELL® support for the further support.
Thanks.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Can Reporting Services 2005 report on SQL Server 2012 database?

We would like to upgrade our SQL Server from Standard 2005 to Enterprise/Standard 2012. Unfortunately, we also have a lot of reports based on Reporting Services 2005. If possible we would like avoid upgrading them at this time.
Is it possible to run Reporting Services 2005 of SQL Server 2012? If yes then is there pre-requiste like drivers or dll or any other to connect SSRS 2005 to SQL server 2012?
If we run Reporting Services 2005 of SQL Server 2012 then do we will face performance lag issue due to version difference of SSRS 2005 and SQL server 2012?

Moderators,
Can anyone merge this -
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/2c44351c-35b4-4208-a2b7-88fc810d53ff/can-reporting-services-2005-report-on-sql-server-2012-database?forum=sqlreportingservices
sathya - www.allaboutmssql.com ** Mark as answered if my post solved your problem and Vote as helpful if my post was useful **.

Reporting Services Configuration with CRM 2011

Hello,
I have successfully configured SharePoint 2010 and CRM 2011 in a DEV environment to use CRM 2011 reports in a SharePoint 2010 library. However, in production, this is not working due to the following:
When I try to run a CRM 2011 report in the SharePoint 2010 library, I see this error:
An error has occurred during report processing. (rsProcessingAborted)
Cannot create a connection to data source 'EMCFCRM2011'. (rsErrorOpeningConnection)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
Also, the data source Test Connection returns this error:
Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON
The SharePoint Integrated Report Server is on the SharePoint VM, and has account credentials (in the SharePoint configuration) that has access to the CRM 2011 databases (organization and MSCRM and ReportServer databases)
Thanks in advance,

Hi,
It looks like Reporting Services is trying to connect to SQL Server using Windows Authentication. When you try this from anywhere other then the RS server, this will require Account Delegation in order for the SQL Server to trust the windows account credentials
which the RS server is passing on to it. This is often problematic to set up as it requires (from memory) kerberos authentication, several settings on the server Active Directory accounts (for both the server accounts and the user account), and is not usable
if your users and servers are in different AD forests.
Probably the easiest solution for you would be to create a SQL login on the SQL Server, and then use RSConfig.exe on the RS Server to tell Reporting Services to always use the new SQL login, instead of Windows Authentication.
More information, please refer to the link:
http://www.experts-exchange.com/Database/Software/Q_23242435.html
Thanks,
Wendy
Wendy Li
TechNet Community Support

Coldfusion and SQL reporting service 2005?

Ive been searching google for hours with no clear answer. How
can you use coldfusion to pull in an sql report from reporting
service? Via a web service or wsdl i assume, but how?

Anwar,
It's important to get the terms right here.
SQL Reporting Services is not the same as SQL Server Reporting Services (SSRS).
SQL Reporting Services refers to an Azure service that lets users develop reports in the cloud. However, it is being retired in Oct. 2014, so you'll want to stay away from that.
SQL Server Reporting Services (SSRS) is the reporting module that is part of SQL Server. This is a sophisticated tool that lets developers create and publish reports that users can access through various methods. It has schedule and refresh capabilities,
and can leverage SQL Server Analysis Services (SSAS) and SQL Server Integration Services (SSIS). You'd most likely use SSRS if you're creating sophisticated reports and queries that you don't want your users creating.
SQL Report Builder is a report creation tool designed for users who want to stay in Microsoft Office. It can be used by developers or end users.
http://technet.microsoft.com/en-us/library/dd220460.aspx
Both environments let you create reports that can be shared (published) on a report server or through SharePoint.
So it's really a matter of what you're most comfortable using.
Hope that helps.

SQL Server 2012 express istallation failing to install "Database Engine Service" and "SQL Server Replication"

I ran SQL Server 2012 express setup as user with administrator privileges and still it's failing to install "Database Engine Service" and "SQL Server Replication".
Any and every ideas on how to resolve this issue is greatly appreciated.

Three weeks passed and I am yet to find a fix for the the failed installation of the database engine on sql server 2012 express installation. I have tried various work-around including uninstalling, deleting all the directory paths, and reinstallation. Still
not able to successfully install sql server 2012 express.
I will greatly appreciate any and every contribution towards resolving this issue. Thanks in advance.
Here is the content of log file after the latest failed installation:
Overall summary:
Final result:                  Failed: see details below
Exit code (Decimal):           -2061893607
Start time:                    2013-12-23 14:42:45
End time:                      2013-12-23 15:07:51
Requested action:              Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SQLEngine:       Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication:     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name:                  mymachine1
Machine processor count:       4
OS version:                    Windows 7
OS service pack:               Service Pack 1
OS region:                     United States
OS language:                   English (United States)
OS architecture:               x86
Process architecture:          32 Bit
OS clustered:                  No
Product features discovered:
Product              Instance             Instance ID
Feature                                  Language
Edition              Version         Clustered
SQL Server 2012      SQLEXPRESS_GT        MSSQL11.SQLEXPRESS_GT          Database Engine Services
1033                 Express Edition      11.0.2100.60    No
SQL Server 2012      SQLEXPRESS_GT        MSSQL11.SQLEXPRESS_GT          SQL Server Replication
1033                 Express Edition      11.0.2100.60    No
SQL Server 2012
Management Tools - Basic                 1033                 Express Edition
11.0.2100.60    No
Package properties:
Description:                   Microsoft SQL Server 2012 Service Pack 1
ProductName:                   SQL Server 2012
Type:                          RTM
Version:                       11
Installation location:         C:\9b6607e524727c7fe1defd80\x86\setup\
Installation edition:          Express
Slipstream:                    True
SP Level                       1
Product Update Status:
Success: KB 2674319
Product Updates Selected for Installation:
Title:                         Service Pack 1
Knowledge Based Article:       KB 2674319
Version:                       11.1.3000.0
Architecture:                  x86
Language:                      1033
Update Source:                 MU
User Input Settings:
ACTION:                        Install
ADDCURRENTUSERASSQLADMIN:      true
AGTSVCACCOUNT:                 NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD:                *****
AGTSVCSTARTUPTYPE:             Disabled
ASBACKUPDIR:                   Backup
ASCOLLATION:                   Latin1_General_CI_AS
ASCONFIGDIR:                   Config
ASDATADIR:                     Data
ASLOGDIR:                      Log
ASPROVIDERMSOLAP:              1
ASSERVERMODE:                  MULTIDIMENSIONAL
ASSVCACCOUNT:                  <empty>
ASSVCPASSWORD:                 <empty>
ASSVCSTARTUPTYPE:              Automatic
ASSYSADMINACCOUNTS:            <empty>
ASTEMPDIR:                     Temp
BROWSERSVCSTARTUPTYPE:         Disabled
CLTCTLRNAME:                   <empty>
CLTRESULTDIR:                  <empty>
CLTSTARTUPTYPE:                0
CLTSVCACCOUNT:                 <empty>
CLTSVCPASSWORD:                <empty>
CLTWORKINGDIR:                 <empty>
COMMFABRICENCRYPTION:          0
COMMFABRICNETWORKLEVEL:        0
COMMFABRICPORT:                0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE:               0
CTLRSVCACCOUNT:                <empty>
CTLRSVCPASSWORD:               <empty>
CTLRUSERS:                     <empty>
ENABLERANU:                    true
ENU:                           true
ERRORREPORTING:                false
FEATURES:                      SQLENGINE, REPLICATION, CONN, BC, SDK, ADV_SSMS, SNAC_SDK
FILESTREAMLEVEL:               0
FILESTREAMSHARENAME:           <empty>
FTSVCACCOUNT:                  <empty>
FTSVCPASSWORD:                 <empty>
HELP:                          false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS:              false
INSTALLSHAREDDIR:              c:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR:           <empty>
INSTALLSQLDATADIR:             <empty>
INSTANCEDIR:                   C:\Program Files\Microsoft SQL Server\
INSTANCEID:                    SQLEXPRESS
INSTANCENAME:                  SQLEXPRESS
ISSVCACCOUNT:                  NT AUTHORITY\Network Service
ISSVCPASSWORD:                 <empty>
ISSVCSTARTUPTYPE:              Automatic
MATRIXCMBRICKCOMMPORT:         0
MATRIXCMSERVERNAME:            <empty>
MATRIXNAME:                    <empty>
NPENABLED:                     0
PID:                           *****
QUIET:                         false
QUIETSIMPLE:                   false
ROLE:                          <empty>
RSINSTALLMODE:                 DefaultNativeMode
RSSHPINSTALLMODE:              DefaultSharePointMode
RSSVCACCOUNT:                  <empty>
RSSVCPASSWORD:                 <empty>
RSSVCSTARTUPTYPE:              Automatic
SAPWD:                         <empty>
SECURITYMODE:                  <empty>
SQLBACKUPDIR:                  <empty>
SQLCOLLATION:                  SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT:                 NT Service\MSSQL$SQLEXPRESS
SQLSVCPASSWORD:                <empty>
SQLSVCSTARTUPTYPE:             Manual
SQLSYSADMINACCOUNTS:           MH\gt038676t
SQLTEMPDBDIR:                  <empty>
SQLTEMPDBLOGDIR:               <empty>
SQLUSERDBDIR:                  <empty>
SQLUSERDBLOGDIR:               <empty>
SQMREPORTING:                  false
TCPENABLED:                    0
UIMODE:                        AutoAdvance
UpdateEnabled:                 true
UpdateSource:                  MU
X86:                           false
Configuration file:            C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131223_144132\ConfigurationFile.ini
Detailed results:
Feature:                       Management Tools - Complete
Status:                        Passed
Feature:                       Client Tools Connectivity
Status:                        Passed
Feature:                       Client Tools SDK
Status:                        Passed
Feature:                       Client Tools Backwards Compatibility
Status:                        Passed
Feature:                       Management Tools - Basic
Status:                        Passed
Feature:                       Database Engine Services
Status:                        Failed: see logs for details
Reason for failure:            An error occurred during the setup process of the feature.
Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name:                SQL Server Database Engine Services Instance Features
Component error code:          0x851A0019
Error description:             Could not find the Database Engine startup handle.
Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3000.0&EvtType=0xE53883A0%400xBE03358B%401306%4025&EvtType=0xE53883A0%400xBE03358B%401306%4025
Feature:                       SQL Server Replication
Status:                        Failed: see logs for details
Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step:                     Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name:                SQL Server Database Engine Services Instance Features
Component error code:          0x851A0019
Error description:             Could not find the Database Engine startup handle.
Error help link:               http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3000.0&EvtType=0xE53883A0%400xBE03358B%401306%4025&EvtType=0xE53883A0%400xBE03358B%401306%4025
Feature:                       SQL Browser
Status:                        Passed
Feature:                       SQL Writer
Status:                        Passed
Feature:                       SQL Client Connectivity
Status:                        Passed
Feature:                       SQL Client Connectivity SDK
Status:                        Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file:               C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131223_144132\SystemConfigurationCheck_Report.htm

Difference between database features - SQL Server 2008 R2 navtive vs SQL Server 2012 with SQL Server 2008 compatibility set?

I am investigating the impact of upgrading from SQL Server 2008 R2 to SQL Server 2012. To reduce the impact of the upgrade, I am planning to restore / create our application database onto SQL Server 2012 with compatibility level 100 (SQL Server 2008 and
SQL Server 2008 R2).
Are there any differences in feature support for database running in native mode on SQL Server 2008 R2 vs a database installed on SQL Server 2012 with compatibility level 100 set?

Are there any differences in feature support for database running in native mode on SQL Server 2008 R2 vs a database installed on SQL Server 2012 with compatibility level 100 set?
Yes there can be difference and impact there are few features deprecated in SQL Server 2012 you must be aware about that. Please see
Deprecated Database Features in SQL Server 2012
Deprecated SQL Server features in SQL Server 2012
After you migrate database to 2012 please don't move ahead with production unless you have tested your application to new created database
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Run Reporting services 2005 with databases housed on SQL Server 2012?

Similar Messages

Maybe you are looking for