Dynamic name for email attachment

Hi all
I have a scenario where i have to change the name of the email attachment dynamically in the UDF or using Modules
Requesting you to help me with this please.
Your help is highly rewardful.
--Keerhi

Hi Keerthika,
Please refer the weblink below:
http://wiki.sdn.sap.com/wiki/display/SI/DynamicEmailAttachmentnameforReceivedMails
Thanks,

Similar Messages

Scheduling: dynamic filenames (for email attachment) possible?

Hi,
I'm using BOE XIr 3. I have a question about the scheduling feature in the Java sdk:
I'm trying to stamp the run date to the name of the file being attached to the scheduled emails.
E.g. financialReport_12012008.xls
Currently, I use
SMTPOptions.getAttachments().add("application/xls","financialReport");
to set the filename.
Is there anyway to make that filename followed by the date when the report is sent out (not the date when it's scheduled)?
Thanks much for any help!
Tuan

If you can do it in InfoView, then you can do it in code.
I think the time holder is something like "filename%SI_STARTTIME%" but I recommend trying scheduling it in InfoView to check.
Sincerely,
Ted Ueda

Table name for email-address field

Hi,
What is the table name for email address field present in address tab of vd03 transaction

>
abap developer wrote:
> adr6 table is for email address present in contact persons tab in vd03 transaction.I need the table name for email address field present in address tab in vd03 transaction.
every thing will be stored in ADR6. with Different addressnumbers contact Person address is different and customer address is different.
there will be 2 different entries in ADR6.

Dynamic Name for Yellow Interface Table

Hi All,
Can anybody guide me how to use dynamic name for Yellow Interface Target Table.
Eg: T_SESSIONID.
I tried
1)Refreshing the SESSIONID in a Variable V1 and using T_#V1 directly
2) Refreshing the T_#V1 in a Variable V2 and using #V2
But its not creating properly.
Please guide.

You want to create dynamic target table name right?
You can refresh a variable like #GET_SESSION
#GET_SESSION= SELECT <%=odiRef.getSession("SESS_NAME")%> FROM DUAL
My tmp table name like TMP_#GET_SESSION
then in your package refresh #GET_SESSION variable and you can use it.
I hope this can be helpful
Thanks

Dynamic name for the physical table

Hi Guys,
How to setup dynamic names for the physical table? Where it is useful?*
Pls help me out on this.
thanks

Check this similar post which might be of help dynamic physical table source schema
Cheers,
KK

Why does the file Name for file attached with Annotations "Attach File" (paperclip) become Unknown when Comments are Published?

Our company recently purchased Adobe Acrobat Pro XI for the purpose of using it for shared electronic reviews. We are using Send for Shared Review created in Adobe Acrobat Pro XI, and all the Comment tools work as expectedexcept the paperclip in Annotations.
When a Word or Excel or Image(png,jpeg) file is attached using the Annotations paperclip, the initiator can initially see and open it. But after Publish Comments is selected and the review file is closed, the file "Name" changes to "Unknown" (although the Description has the correct file name and extension). The Modified information is Unknown, as is the Size and Compressed Size.
When the review file is then re-opened, even the initiator cannot open the file, although:
The file location is marked with the paperclip within the document.
The file name is shown in the Comments List with the initiator's name.
In the Attachments list (the paperclip beneath the Thumbnails and Bookmarks) the Name appears as Unknown, Description shows the file name, Modified is Unknown, Size is Unknown, and Compressed Size is Unknown.
The file Name cannot be edited, although the file Description can be.
We have followed the procedure described in the tutorials but cannot figure out how to troubleshoot this situation. Since this feature was the reason for the purchase of Adobe Acrobat Pro IX, we would any help. Please don't leave out any basics since we are all new users.
We have several people with Adobe Acrobat Pro XI and the rest have Adobe Reader XI and it is a Windows platform. Can someone please give us some advice how to get this feature to work as described?

FYI Rave,
There are some other forum entries with this exact same issue...:
Cannot Open Attachments in PDF
Why does the file Name for file attached with Annotations "Attach File" (paperclip) become Unknown when Comments are Published?
Can someone help us get the COMMENTS ATTACHMENT TOOL to work as described in Acrobat Pro XI?

Use principal name for email if blank in Active Directory

Hi all,
allthough I set "Use principal name for email if blank in Active Directory", Spiceworks asks me for an emailadress when i want to Login to the Portal with an AD user without emailadress.
This topic first appeared in the Spiceworks Community

Hi,
What if we change the user name of user account, will it have impact on roaming profiles.
Yes, it will affect roaming profiles. Please rename the roaming profile folder as the new user account name, in addition, change the profile path in ADUC.
Here is an related article below for you:
How to Rename a Windows 7 User Account and Related Profile Folder
http://social.technet.microsoft.com/wiki/contents/articles/19834.how-to-rename-a-windows-7-user-account-and-related-profile-folder.aspx
Best Regards,
Amy

How to compress file 32+ mb for email attachment

how to compress file 32+ mb for email attachment, after I used compress it's still shows 29 mb. Is there another step I could do. I am new with MAC so please forgive if this sound simple and stupid question.

You simply don't attach that file to email. Even if you could cut the size by half, that's still way too big for email. Many mail servers will remove attachments over a certain size, and for most of those that size is below 10 MB. Find another way to share that file, like a web server or Dropbox or something along those lines.

Custom file name format for EMAIL Attachment

Hi,
We are seding attachment to Supplier by using Email Transport protocol over Custom Document Generic Exchange.
It delivers mail successfully with an attachment as EMAIL 1.0. but we want to customize the filename( ex: c111.txt) . how can we change the attachement filename ? and coud u tell us what are the properties are required(tip.properties) for email tranport.
Regards,
Jawah

Hi,
Have you checked -
http://www.oracle.com/technology/products/integration/b2b/pdf/B2B_TN_009_Transport_SMTP.pdf
http://www.oracle.com/technology/products/integration/b2b/pdf/B2B_TN_021_TIP_Properties.pdf
Also refer -
override default send from email id and attachment name in email delivery
I am not very sure whether name of attachment can be customized. I think anybody from Oracle IDC team can confirm the same.
Regards,
Anuj
Edited by: Anuj Dwivedi, Infosys on Oct 13, 2009 2:09 PM

Dynamic name for attachment in User Decision

Hi...
I have a requirement wherein the name of the attachment in the user decision has to be populated dynamically. I am using the same BO method for user decision but is triggering 2 different objects. Please advice on how to achieve this.
Scenario - I am using BUS2081 for Invoice and for Credit Memo. If the credit memo is created, the approver has to see the name of the attachment as Credit Memo xxxx and if an invoice is created, he has to see the attachment as Invoice xxxx. As standard, whatever object is created, the attachment name is Incoming Invoice xxxx (name of the BO Object Bus2081).
Warm Regards,
Jubish Jacob

The object name is static but the default attribute can be changed (use a z-subobject and delegate back) so you can do something like this: instead of: incoming invoice(object name) 12345(invoice number - default attribute) you will have document(new object name) incoming invoice/credit memo 12345(document type & number concatenated - a new default attribute)
Another option - I think credit memos have an object (BUS2094) or you can create one - in the task have both object types in the container, when its a credit memo transfer only the credit object when it's an invoice transfer only the invoice object.

File to mail scanario Dynamic name for e-mail attachments

Hi ,
I am using standard mail package for Dynamic name in the mail attachment.
Content_Disposition : = attachment
Content_Type = file name I am taking from DynamicConfiguration
Now I received mail , but file name have (abc.txt.dat) extension .dat but i want it same as send by sender file adapter(abc.txt)
Please suggest how to handle this.
Thanks
Mohit

Hi,
my pretty solution
http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/3202
Regards,
Michal Krawczyk

Retrieve file name of email attachment

Hi,
it's getting more and more absurd about the fact that it is not possible to get the file name of an email attachment. It's not possible by writing a module (getName(), getContentType() nor getDescription() doesn't work) or by accessing mailadapter specific message attributes.
I mean it's a basic requirement. Why is it so diffcult to implement it???
-Steffen
(frustrated)

Hi,
See the below links
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address
http://help.sap.com/saphelp_nw04/helpdata/en/23/c093409c663228e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/f1/9ef1680efbec4c9656eb028c44ab0b/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ad/bf93409c663228e10000000a1550b0/frameset.htm
Mail adapter
Regards
Chilla..

How to give dynamic name for csv export files?

Hi,
how we can give dynamic file name for each csv export file? ex(&item_name.csv)
I am using apex 4.1 and IE 6,
thanks in advance
regards
Chandran

Please help me on this
I am using report template as a csv export..
when user click on download link on other page he will redirect to csv export temlate page and he is is directly get the open or save window
but dynamic title name is not working for only for this.
regards
Chandran

Dynamic names for I$ ,C$ and E$ tables in ODI

Dear ODI Team,
We have a requirement where we are loading header data and then line data in our Package.ODI internally creates work tables to load data into target tables.If multiple sessions of the same interface is executed at the same time the I$table of the previous session affects the I$ table of the next session.Hence if session1 has completed loading then it is at the stage of dropping the I$ table.Hence the second session is erroring out.Kindly let me know if there is an option to create these work table names dynamically for each session
Thanks ,
Anand

Even I an getting similar error trying to use Global variable for dynamic names of the work tables
Scripts Generated by the IKM :
create table XDO.#global."gv_test_dynameSSTST_AN"
ANY_NEW_ID NUMBER(22) NULL,
ANY_NEW_ATTRIB1 VARCHAR2(50) NULL,
ANY_CONC_ATTRIB2 VARCHAR2(150) NULL,
DECODE_CODE1 CHAR(5) NULL,
ANY_REF_CODE2 VARCHAR2(60) NULL,
ANY_DATE1 DATE NULL,
ANY_DATE2 DATE NULL,
IND_UPDATE char(1)
NOLOGGING
Getting the following error on execution :
911 : 42000 : java.sql.SQLException: ORA-00911: invalid character
java.sql.SQLException: ORA-00911: invalid character
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1086)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3057)
at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.g.y(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Thread.java:595)

Custom dynamic names for outbound payment files in R12

I have asked this on a couple of forums, but somehow missed this one.
We are upgrading from 11i to R12 and require custom dynamic file names for the Payments output files (cheques, advices, efts). I see that you can create a custom prefix and extension through payment profiles, but the functionality is very limited (i.e. no date stamp). I am thinking that others must have come across this before, and am wondering how you have handled such a requirement. Is it possible to add custom steps to the seeded payment process? Can the payment process be run as part of a request set and then a custom step added which grabs the output file and renames it based on information obtained from the batch and the process profile. Our goal is a fully automated payment process where batches are scheduled, processed and files renamed and sent out to banks and a 3rd party printer with no user interventation.
Any advice/tips would be appreciated.
Thanks.
Tam.

Hi Tam,
Could you please let me know if you got the solution as we have a similar requirement of renaming the output file as perthe business needs fro which we need custom program.
Thanks,
Manas

Dynamic name for email attachment

Similar Messages

Maybe you are looking for