Run time configuration in jbuilder.

I have a program which will need to set some system parameters when executing it.
java -D {setparameter} -D {set some other parameter } -jar program.jar.
I want to know where can i enter this information in the JBuilder as as to use it for executing this program.

Hi Annie, thanks a lot.. could u tell me the exact place in jbuilder to set the environment variables.. I searched it in Run->options it is not available there.

Similar Messages

  • Is it possible to use run-time configuration in conjunction with Session Manager?

    I'm trying to avoid using MAX, basically because it's a pain for users to configure MAX when the application already knows what the configuration is. I actually get the configuration from a database, but that's another story. I've experimented with run-time configuration (see page 4-31 of the 'IVI Driver Toolset' manual) and it works fine. However, when I try to use this in conjunction with Session Manager, session manager complains that my logical name is not a driver session name. I suspect that Session Manager is looking up logical names from a different source, therefore run-time configuration won't work. Any suggestions? I've attached the files I'm working with.
    Attachments:
    SessionMgrTrial.zip ‏41 KB

    Hello Mark:
    The Session Manager GetLogicalNames method does not distiguish between logical names and virtual instrument names. A user of the method cannot ask for just logical names or just virtual instrument names. Right now you always get both. The new function is called InstrSessionMgr.GetNames. Notice that the online help file says Boolean for the flags parameter when it is an enum.
    Hope this helps. If you have any further queries, please let us know.
    -NI support
    National Instruments - Software IS the instrument!
    Attachments:
    help.gif ‏22 KB

  • Whats run time configuration and php date and time constants?

    http://www.w3schools.com/php/php_ref_date.asp .....are they required to make dynamic websites....??

    Are they required to make dynamic websites?  No.  But if you are going to use any date functions (like for example one I frequently use - stringtotime()), then you would need to use -
    date_default_timezone_set()
    to properly establish the timezone to be used for your calculations.

  • Adding DVM values at run time

    Hi,
    I am trying to adding domain values to DVM at run time,
    it is getting added to DVM at that movement ,bt
    when i redeploy the service I am not able to see the changes.
    so help required regarding this

    Hello
    That is the solution to his problem, by the sounds of it when he redploys his code he gets the old values (the one in his code) if he migrates it to the MDS when he redeploys it won't change. This will seperate his deployment from run time configuration values which is a good idea.
    Best Regards Tristan

  • Error -17600 when switching from LabVIEW Development System to LabVIEW Run-Time Engine in Adapter Configuration

    I receive an error message (code -17600) while loading my test sequence after switching from LabVIEW Development System (2009 f3) to LabVIEW Run-TIme Engine using the Adapter Configuration.
    ErrorCode: -17600,
    Failed to load a required step's associated module.
    LabVIEW Run-Time Engine version 9.0.1f3.
    When I switch back to the LV development system, everything is OK, and the sequence loads and runs perfectly.
    My TestStand Engine Version is 2012 f1 (5.0.0.262).
    I'd appreciate any help on this issue.
    Roman

    Hi Roman,
    There are a couple of things you can try:
    1) Determine if the LabVIEW RunTime Engine is corrupted in some way. Create a new simple VI with no sub-VIs, using the same LabVIEW Development system you used for mass-compiling the VIs. Create a TestStand step that calls this VI and ensure it runs correctly. Now switch your LabVIEW adapter to use the RuntimeEngine and choose the "Auto detect using VI version" option.
    Check if the simple VI is loadable and runs without errors in TestStand.
    If the step generates the same error, you should try a re-install of the LabVIEW development system.
    If not, its most likely that there is some VI you are using that is not loadable in the LabVIEW Runtime Engine because:
    1) Some sub-VI is still not saved in the right version or bitness. Open the VI heirarchy of the top-level VI that you are calling from TestStand and examine the paths of all the sub-VIs to check if they were in the folder you masscompiled and re-save any that are outside this directory.
    Also, when you try to close the top level VI, do you get a prompt to save any unsaved files? If so, they could be the sub-VIs that are not saved in the right version. Save all of them.
    Check if you are loading any VIs programatically and if these are compiled and saved in the right version as well.
    2) There is some feature you are using in your LabVIEW code that is not supported in the LabVIEW RunTime Engine. To check this, add your top-level VI to a LabVIEW project and create a new build specification and create a new executable from this VI.
        Right-click "Build Specifications" and choose "New->Application(EXE)".
        In the Application Properties window, select Source Files and choose the top level VI as the start-up VI.
        Save the properties.
        Right-click on the newly created build specification and choose Build.
    Run this executable (it will be run using the LabVIEW RunTime) and check if the VI has a broken arrow indicating that it cannot be loaded and run in the LabVIEW Runtime Engine.
    You might need to examine your code and find the feature which is not supported in the LabVIEW RunTime and find an alternative.
    Another thing i forgot to mention the last time around is if you are using 64-bit LabVIEW with 32-bit TestStand, then executing code using LabVIEW RTE from TestStand will not work since the 64-bit LabVIEW RTE dll cannot be loaded by the 32-bit TestStand process.
    If none of the above steps resolve the issue, consider sharing your LabVIEW code so i can take a look.
    Regards,
    TRJ

  • How to configure oracle 6i report server run time component with application server

    we got oracle 6i report server for developing the web based reports for our undergoing product. we r succesed in developing the web based reports using oracle 6i report server.But we r facing problems while deploying the product with oracle reports at clients place,why because the client does not have the oracle 6i report server. To solve this problem we have to configure the oracle 6i report server run time component with application server at client side , but we are unable to configure this component(that is CGI handler).

    You can run multiple instances of Reports Server in 6i.
    In tnsnames.ora, for each server, have a different name and each listening to different port.
    For example,
    server1.world = (ADDRESS = (PROTOCOL = TCP)(Host = myhost.mydomain.com)(Port = 1949))
    server2.world = (ADDRESS = (PROTOCOL = TCP)(Host = myhost.mydomain.com)(Port = 1950))
    Also, if you want to know about Reports Server Clustering, you may refer to "Publishing Reports" document on OTN:
    http://otn.oracle.com/docs/products/reports/pdf/A73173_01.pdf

  • Combining package configuration and Execute SQL task at run time

    Hi everyone,
    I have an issue regarding setting values at run time
    I use package configuration to manage different enviroments scenarios (DEV, PROD):
    XML file to store the connections string of SSISConfigDB
    and the actual values of parameters in that SSISConfig DB tables Filtered by ConfigurationFilter column
    Now, one of my packages needs in addition setting at run time value of a flat file name
    i used an Execute SQL task - within the task i read into a variable the file name using command line
    then, the full path of Flat File Connection is set by expression concatenating the root folder and the variable
    the problem is that the variable stays empy! as if the Execute SQL task was never executed!
     Am i doing something incorrect? in the package configuration wizard the configured value are only XML file and the connection string of the DB.
    to summerize - how can i combine package configuration, default value, Execute SQL task and expression at runtime?

    1.EvaluateasExpression=TRUE (Full Path variable)
    2. Do you mean to invlole a ISNULL() function in the expression? if so, no
    3. Of course i recieve a valid value
    4. The Full path expression is evaluated to the root folder - without the portion of the file name
    here is the syntax in Execute SQL Task:
      truncate table OnErrorFlagTable
      Declare @Path varchar(128)
      Declare @FileName varchar(128) 
      Declare @SenderID varchar(5)
      Declare @INST_COD varchar(5)
      Declare @Flag int = 0
     Declare @FileType varchar(2)='01'
      Truncate table TraumaRecords
    Select @Path = 'C:\RootFolder\'
     --***Insert into Temp table the file so we can take his name***--
    Create Table #Tmp(Txt Varchar(Max))
    Insert Into #Tmp(Txt)
    Exec master..xp_cmdshell 'Dir *.txt C:\RootFolder\/b'
    select top 1 @Filename = Txt From #Tmp
    Where ISNUMERIC(substring(Txt,1,1))=1
    order by Txt desc
    Insert into OnErrorFlagTable
    Select 2,@FileName
    Select @FileName as TraumaFileName,@FileType as FileType
    Then, in ResultSet TraumaFileName and FileType are mapped
    Expression of @TraumaFlatfileFullPath is
    @[User::TraumaFlatfilePath]+ @[User::TraumaFlatFileName]
    where the variable @[User::TraumaFlatfilePath] is evaluated in variable window (default value)
    and it's value is C:\RootFolder\
    and @[User::TraumaFlatFileName] is the ResultSet of the ExecuteSQLTask
    and for some reason when executed in SSIS return null while in SSMS return the expected value
    Can you try making this into a procedure with required parameters and call it from SQL task to see if you get return value correctly? Use OUTPUT parameters for getting back required values
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • How to call the Application configuration in run time.

    hi guru,
    i have created two  Application configuraton   and it working fine.
    my question how to call the application configuration in run time.
    Example :
    Based on the user i want to change the Application Configuration.like Super user and Normal user.
    Advance thank's
    Regard's
    Vivekanathan.S

    Hi,
    Please try out this way-
    Have a look at this table -
    WDY_CONF_APPLU - (Customizing Data for Web Dynpro Applications).
    after you are done with the configuration--
    Ge the config id for the given application from this table. And depending on the user get an entry from this table and display accordingly.
    Please refer to these links -
    different default layouts for different CONFIG_IDs
    Get WDCONFIGURATIONID
    Regards
    Lekha

  • HttpProxyServlet need run-tim NOT deploy-time configuration

    HI,
    I've looked through a lot of the traffic and haven't seen
    anything along the lines of this question. I have a system
    which we compile and build and then start up in a specific
    mode (i.e. production, development etc). All of the config is
    done at application startup time (the config.xml file is dynamically generated).
    The problem is that when configuring the
    web.xml for the HttpProxyServlet we must enter in a URL for the
    redirect to go to. What I really want to do is along hte lines
    of entering in a property-name, the value of which will give me
    the URL, i.e. instead of:
    <servlet>
    <servlet-class>
    weblogic.t3.srvr.HttpProxyServlet
    </servlet-class>
    <init-param>
    <param-name>redirectURL</param-name>
    <param-value>http://myRedirectPort</param-value>
    </init-param>
    </servlet>
    I would like to do something like this :
    <servlet>
    <servlet-class>
    com.myapp.HttpProxyServlet
    </servlet-class>
    <init-param>
    <param-name>redirect-url-property-name</param-name>
    <param-value>
    my-prop-name.redirect-url
    </param-value>
    </init-param>
    </servlet>
    With the second one I would then pass in the property:
    -Dmy-prop-name.redirect-url=http://myRedirectPort
    Which would give me "run" (not deploy/build) time configuration
    of this URL.
    My question is:
    1. Has anyone done anything like this before ?
    2. Has anyone any knowledge/experience of subclassing the
    weblogic.t3.srvr.HttpProxyServlet ?
    3. Is there any way to do this type of thing in weblogic ?
    4. Would it be easier to write my own proxy servlet ?
    Any pointers to same appreciated.
    5. Is it programmatically easy/possible to register the
    HttpProxyServlet in my own hand written servlet.
    Any help very much appreciated.
    I have cross posted this because I think it is partly,
    environment, install based and partly servlet based.
    Thanks,
    Brian

    David,
    There are different options which you might try.
    1. At runtime, you can dynamically determine which sequence to call. For
    example, page 11-5 of the Getting Started Manual discusses an example of
    dynamically selecting different sequences to call.
    2. Also, there is an example on the web at www.ni.com/support/edp/
    Follow the link to TestStand and download Dynamically Determine Which Code
    Module to Run.
    3. Other options that you should consider is the Limit Loader step type.
    You can programmatically load any step property with the limit loader.
    There are shipping examples that use the Limit Loader and there are examples
    on the web.
    Best regards,
    Paul Mueller
    NI
    David Joyce wrote in message
    news:[email protected]..
    > We are currentl
    y evaluating TestStand as our future manufacturing test
    > engine.
    >
    > I'm not sure that this is the correct question, but can TestStand
    > sequences be loaded at run-time?
    >
    > We want to distribute the TestStand engine onto our manufacturing floor
    > as a functional test master program for all of our single board computer
    > UUTs. We need to be able to reconfigure TestStand for each type of UUT.
    >
    > These UUTs share the highest level of test sequences (e.g. RAM test, CPU
    > test, RTC test), however the UUTs may have major design differences that
    > make steps, or sequences, within the tests very different. For example:
    > UUTs may have different processors and require completely different CPU
    > tests, or the type and number of I/O may be completely different between
    > UUTs with identical processors.
    >
    > We want to build a set of directories with each one unique to a UUT.
    > TestStand would be instructed at run-time as to the UUT and configure,
    > or reconfigure, itself accordingly.
    >
    > Any sug
    gestions or examples would be appreciated.
    >
    > Thank you
    >

  • Select serial comm port in sub vi during run-time

    Hi, would like to be able to select the comm port (serial RS232) in sub vi to use in main vi during run time. How can I do this? Have tried and failed, for on startup an error occurs because I have not selected a port yet. An example would be invaluable! Thanks alot, Madri

    Hi Madri !
    What you could do is to intercept the com errors, and open a configuration vi either if there is an init error or if the user has pressed a "Change port" boollean (or menu...). Do not forget to close the previously opened serial port, and to open/init the new one. I have attached a small example of this idea.
    Of course com errors can have various origins, and do not require always to change the serial port. So, you have some additional work to do.
    Hope this helps
    CC
    Chilly Charly    (aka CC)
             E-List Master - Kudos glutton - Press the yellow button on the left...        
    Attachments:
    Select_port.vi.zip ‏12 KB
    Com_with_serial_init_vi.vi.zip ‏13 KB

  • Planned order creation with sale order assingment at the run time of MRP

    some material item not planed with sale order stock in MRP run time. all setting in material master are corrected as i knowing.having some mistake in setting other configuration.

    Planning strategy is Make to order individual collective as individual but still come as make to stock plan orders
    Incase of Header material- Plan order is creating in MTS
    Check the sale order procurement tab, Is The requiremnt type is relevant to your Stratergy?, if not chnage it to correct requiremnt type and rerun MRP again
    Incase of component material- Plan order is creating in MTS
    Check for the component material MRP 4 View, individual/Coll.req- as 1. If not set as 1 and rerun the MRP again

  • Interface Mapping run time error...java.lang.nullpointerException  thrown

    Hi,
    I am trying to create a simple f2f scenairo and when I tested the configuration xi throws this message as :
    Interface Mapping run time error...java.lang.nullpointerException  thrown during application mapping.
    <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Request Message Mapping
      -->
    - <SOAP:Envelope xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SAP="http://sap.com/xi/XI/Message/30">
    - <SOAP:Header>
    - <SAP:Main xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" versionMajor="003" versionMinor="000" SOAP:mustUnderstand="1" wsu:Id="wsuid-main-92ABE13F5C59AB7FE10000000A1551F7">
      <SAP:MessageClass>ApplicationMessage</SAP:MessageClass>
      <SAP:ProcessingMode>asynchronous</SAP:ProcessingMode>
      <SAP:MessageId>9E0AD300-9F93-11DB-8770-000D60514DD2</SAP:MessageId>
      <SAP:TimeSent>2007-01-09T03:43:49Z</SAP:TimeSent>
    - <SAP:Sender>
      <SAP:Service>CAMEL_BS_01</SAP:Service>
      <SAP:Interface namespace="http://kia.com/fiel2file">Source01_MI</SAP:Interface>
      </SAP:Sender>
    - <SAP:Receiver>
      <SAP:Party agency="" scheme="" />
      <SAP:Service>Camel_BService_01</SAP:Service>
      <SAP:Interface namespace="http://kia.com/fiel2file">Target01_MI</SAP:Interface>
    - <SAP:Mapping notRequired="M">
      <SAP:ObjectId>j5qiPBwVPU2yonkPwhdt/g==</SAP:ObjectId>
      <SAP:SWCV>tR26oJ7nEdu5oM/vCXwv+g==</SAP:SWCV>
      <SAP:SP>-1</SAP:SP>
      </SAP:Mapping>
      </SAP:Receiver>
      <SAP:Interface namespace="http://kia.com/fiel2file">Source01_MI</SAP:Interface>
      </SAP:Main>
    - <SAP:ReliableMessaging xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:QualityOfService>ExactlyOnce</SAP:QualityOfService>
      </SAP:ReliableMessaging>
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>Application</SAP:Category>
      <SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
      <SAP:P1>com/sap/xi/tf/_Equipment_MM_</SAP:P1>
      <SAP:P2>com.sap.aii.utilxi.misc.api.BaseRuntimeException</SAP:P2>
      <SAP:P3>RuntimeException in Message-Mapping transformatio~</SAP:P3>
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping com/sap/xi/tf/_Equipment_MM_: RuntimeException in Message-Mapping transformatio~</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    - <SAP:HopList xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
    - <SAP:Hop timeStamp="2007-01-09T03:43:49Z" wasRead="false">
      <SAP:Engine type="AE">af.pi7.gbdci550</SAP:Engine>
      <SAP:Adapter namespace="http://sap.com/xi/XI/System">XIRA</SAP:Adapter>
      <SAP:MessageId>9E0AD300-9F93-11DB-8770-000D60514DD2</SAP:MessageId>
      <SAP:Info />
      </SAP:Hop>
    - <SAP:Hop timeStamp="2007-01-09T03:43:50Z" wasRead="false">
      <SAP:Engine type="IS">is.03.gbdci550</SAP:Engine>
      <SAP:Adapter namespace="http://sap.com/xi/XI/System">XI</SAP:Adapter>
      <SAP:MessageId>9E0AD300-9F93-11DB-8770-000D60514DD2</SAP:MessageId>
      <SAP:Info>3.0</SAP:Info>
      </SAP:Hop>
      </SAP:HopList>
    - <SAP:RunTime xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
      <SAP:Date>20070108</SAP:Date>
      <SAP:Time>224350</SAP:Time>
      <SAP:Host>gbdci550</SAP:Host>
      <SAP:SystemId>PI7</SAP:SystemId>
      <SAP:SystemNr>03</SAP:SystemNr>
      <SAP:OS>AIX</SAP:OS>
      <SAP:DB>DB6</SAP:DB>
      <SAP:Language />
      <SAP:ProcStatus>014</SAP:ProcStatus>
      <SAP:AdapterStatus>000</SAP:AdapterStatus>
      <SAP:User>PIAFUSER</SAP:User>
      <SAP:TraceLevel>1</SAP:TraceLevel>
      <SAP:LogSeqNbr>002</SAP:LogSeqNbr>
      <SAP:RetryLogSeqNbr>000</SAP:RetryLogSeqNbr>
      <SAP:PipelineIdInternal>SAP_CENTRAL</SAP:PipelineIdInternal>
      <SAP:PipelineIdExternal>CENTRAL</SAP:PipelineIdExternal>
      <SAP:PipelineElementId>5EC3C53B4BB7B62DE10000000A1148F5</SAP:PipelineElementId>
      <SAP:PipelineStartElementId>5EC3C53B4BB7B62DE10000000A1148F5</SAP:PipelineStartElementId>
      <SAP:PipelineService>PLSRV_MAPPING_REQUEST</SAP:PipelineService>
      <SAP:QIdInternal>XBTOW0__0001</SAP:QIdInternal>
      <SAP:CommitActor>X</SAP:CommitActor>
      <SAP:SplitNumber>0</SAP:SplitNumber>
      <SAP:NumberOfRetries>0</SAP:NumberOfRetries>
      <SAP:NumberOfManualRetries>0</SAP:NumberOfManualRetries>
      <SAP:TypeOfEngine client="200">CENTRAL</SAP:TypeOfEngine>
      <SAP:PlsrvExceptionCode />
      <SAP:EOReferenceRuntime type="TID">097C2FFA403445A30F7600CE</SAP:EOReferenceRuntime>
      <SAP:EOReferenceInbound type="TID" />
      <SAP:EOReferenceOutbound type="TID" />
      <SAP:MessageSizePayload>168</SAP:MessageSizePayload>
      <SAP:MessageSizeTotal>2608</SAP:MessageSizeTotal>
      <SAP:PayloadSizeRequest>168</SAP:PayloadSizeRequest>
      <SAP:PayloadSizeRequestMap>0</SAP:PayloadSizeRequestMap>
      <SAP:PayloadSizeResponse>0</SAP:PayloadSizeResponse>
      <SAP:PayloadSizeResponseMap>0</SAP:PayloadSizeResponseMap>
      <SAP:Reorganization>INI</SAP:Reorganization>
      <SAP:AdapterInbound>AENGINE</SAP:AdapterInbound>
      <SAP:InterfaceAction>DEL</SAP:InterfaceAction>
      <SAP:RandomNumber>67</SAP:RandomNumber>
      <SAP:AckStatus>000</SAP:AckStatus>
      <SAP:SkipReceiverDetermination />
      <SAP:Sender_Agreement_GUID>49574D50A74F3F5D902E20831759594C</SAP:Sender_Agreement_GUID>
      <SAP:Serialize_Children>X</SAP:Serialize_Children>
      </SAP:RunTime>
    - <SAP:PerformanceHeader xmlns:SAP="http://sap.com/xi/XI/Message/30">
    - <SAP:RunTimeItem>
      <SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
      <SAP:Timestamp type="begin" host="gbdci550">20070109034350.025474</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="ADAPTER_IN">INTEGRATION_ENGINE_HTTP_ENTRY</SAP:Name>
      <SAP:Timestamp type="end" host="gbdci550">20070109034350.064329</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
      <SAP:Timestamp type="begin" host="gbdci550">20070109034350.067038</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="CORE">INTEGRATION_ENGINE</SAP:Name>
      <SAP:Timestamp type="end" host="gbdci550">20070109034350.085552</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name>
      <SAP:Timestamp type="begin" host="gbdci550">20070109034350.085573</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="DBQUEUE">DB_ENTRY_QUEUING</SAP:Name>
      <SAP:Timestamp type="end" host="gbdci550">20070109034350.472198</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="begin" host="gbdci550">20070109034350.473649</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="end" host="gbdci550">20070109034350.483159</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="begin" host="gbdci550">20070109034350.483341</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_INTERFACE_DETERMINATION</SAP:Name>
      <SAP:Timestamp type="end" host="gbdci550">20070109034350.48668</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
      <SAP:Timestamp type="begin" host="gbdci550">20070109034350.486921</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_RECEIVER_MESSAGE_SPLIT</SAP:Name>
      <SAP:Timestamp type="end" host="gbdci550">20070109034350.49182</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="DBQUEUE">DB_SPLITTER_QUEUING</SAP:Name>
      <SAP:Timestamp type="begin" host="gbdci550">20070109034350.491835</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="DBQUEUE">DB_SPLITTER_QUEUING</SAP:Name>
      <SAP:Timestamp type="end" host="gbdci550">20070109034350.720028</SAP:Timestamp>
      </SAP:RunTimeItem>
    - <SAP:RunTimeItem>
      <SAP:Name type="PLSRV">PLSRV_MAPPING_REQUEST</SAP:Name>
      <SAP:Timestamp type="begin" host="gbdci550">20070109034350.721545</SAP:Timestamp>
      </SAP:RunTimeItem>
      </SAP:PerformanceHeader>
    - <SAP:Diagnostic xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:TraceLevel>Information</SAP:TraceLevel>
      <SAP:Logging>Off</SAP:Logging>
      </SAP:Diagnostic>
    - <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
      <Trace level="1" type="T">Party normalization: sender</Trace>
      <Trace level="1" type="T">Sender scheme external = XIParty</Trace>
      <Trace level="1" type="T">Sender agency external = http://sap.com/xi/XI</Trace>
      <Trace level="1" type="T">Sender party external =</Trace>
      <Trace level="1" type="T">Sender party normalized =</Trace>
      <Trace level="1" type="T">Party normalization: receiver</Trace>
      <Trace level="1" type="T">Receiver scheme external =</Trace>
      <Trace level="1" type="T">Receiver agency external =</Trace>
      <Trace level="1" type="T">Receiver party external =</Trace>
      <Trace level="1" type="T">Receiver party normalized =</Trace>
      <Trace level="1" type="B" name="CL_XMS_HTTP_HANDLER-HANDLE_REQUEST" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">XMB was called with URL /sap/xi/engine?type=entry</Trace>
      <Trace level="1" type="T">COMMIT is done by XMB !</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
      <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV" />
      <Trace level="1" type="T">****************************************************</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">XMB entry processing</Trace>
      <Trace level="1" type="T">system-ID = PI7</Trace>
      <Trace level="1" type="T">client = 200</Trace>
      <Trace level="1" type="T">language = E</Trace>
      <Trace level="1" type="T">user = PIAFUSER</Trace>
      <Trace level="1" type="Timestamp">2007-01-09T03:43:50Z CET</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">* *</Trace>
      <Trace level="1" type="T">****************************************************</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Message-GUID = 9E0AD3009F9311DB8770000D60514DD2</Trace>
      <Trace level="1" type="T">PLNAME = CENTRAL</Trace>
      <Trace level="1" type="T">QOS = EO</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
      <Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
      <Trace level="1" type="T">Queue name : XBTI0008</Trace>
      <Trace level="1" type="T">Generated prefixed queue name = XBTI0008</Trace>
      <Trace level="1" type="T">Schedule message in qRFC environment</Trace>
      <Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Going to persist message</Trace>
      <Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
      <Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
      <Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
      <Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
      <Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
      <Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
      <Trace level="1" type="T">system-ID = PI7</Trace>
      <Trace level="1" type="T">client = 200</Trace>
      <Trace level="1" type="T">language = E</Trace>
      <Trace level="1" type="T">user = PIAFUSER</Trace>
      <Trace level="1" type="Timestamp">2007-01-09T03:43:50Z CET</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
      <Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
    - <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
    - <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
      <Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
      <Trace level="1" type="T">Cache Content is up to date</Trace>
      </Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
    - <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
    - <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
      <Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
      <Trace level="1" type="T">Cache Content is up to date</Trace>
      </Trace>
      </Trace>
      </Trace>
      </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
      <Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
    - <!--  ************************************
      -->
    - <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">number of receivers: 1</Trace>
      <Trace level="1" type="T">Single-receiver split case</Trace>
      <Trace level="1" type="T">Post-split internal queue name = XBTOW0__0001</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Persisting single message for post-split handling</Trace>
      <Trace level="1" type="T" />
      <Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
      <Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
      <Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
      <Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE" />
      <Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
      <Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
      <Trace level="1" type="T">system-ID = PI7</Trace>
      <Trace level="1" type="T">client = 200</Trace>
      <Trace level="1" type="T">language = E</Trace>
      <Trace level="1" type="T">user = PIAFUSER</Trace>
      <Trace level="1" type="Timestamp">2007-01-09T03:43:50Z CET</Trace>
      <Trace level="1" type="T">----
    </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID" />
      <Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
      <Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
      <Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
    - <!--  ************************************
      -->
      <Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV" />
    - <!--  ************************************
      -->
      <Trace level="1" type="T">Interface Mapping http://kia.com/fiel2file Equipment_IM_Outbound</Trace>
      <Trace level="1" type="T">RuntimeException during appliction Java mapping com/sap/xi/tf/_Equipment_MM_</Trace>
      <Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:403) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.mappingtool.tf3.IllegalInstanceException: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:398) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))</Trace>
      <Trace level="1" type="T">Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_Equipment_MM_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd</Trace>
      <Trace level="1" type="T">com.sap.aii.ibrun.server.mapping.MappingRuntimeException: Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_Equipment_MM_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:73) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:403) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.mappingtool.tf3.IllegalInstanceException: Cannot produce target element /ns0:Equipment_MT/MaterialNumber. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:398) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:141) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:102) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor291.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java(Compiled Code)) at $Proxy184.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.call(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequest(RFCJCOServer.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.dispatchRequest(JCO.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.dispatchRequest(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.MiddlewareJRfc$Server.listen(MiddlewareJRfc.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.listen(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.work(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.loop(JCO.java(Compiled Code)) at com.sap.mw.jco.JCO$Server.run(JCO.java:8044) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code))</Trace>
      <Trace level="1" type="E">CL_XMS_PLSRV_MAPPING~ENTER_PLSRV</Trace>
      </Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST" />
      <Trace level="1" type="System_Error">Error exception return from pipeline processing!</Trace>
      <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
    - <!--  ************************************
      -->
      </SAP:Trace>
      </SOAP:Header>
    - <SOAP:Body>
    - <SAP:Manifest xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:wsu="http://www.docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" wsu:Id="wsuid-manifest-5CABE13F5C59AB7FE10000000A1551F7">
    - <SAP:Payload xlink:href="cid:[email protected]">
      <SAP:Name>MainDocument</SAP:Name>
      <SAP:Description />
      <SAP:Type>Application</SAP:Type>
      </SAP:Payload>
      </SAP:Manifest>
      </SOAP:Body>
      </SOAP:Envelope>
    Please I request to give me some hint how to troubleshoot this issue.
    Thanks a lot,
    Srujan

    Hi, i have the same type of error when testing configuration, but it seems that the mapping even doesn't start :
    i'm creating an EBP to XCBL scenario, so it's a RFC->XI->XCBL 3.5
    Here is the Java exception
    Mappage d'interface
    Can someone be helpful for that ?
    Regards
    Laurent
    Message was edited by:
            Laurent Gitton

  • LabVIEW 8.2 -- "unable to locate LabView run-time" error message

    I am trying to run a LabVIEW version 8 exe file and keep getting the
    "Unable to locate" error. I downloaded LabVIEW_8.2_Runtime_Engine.exe
    from the NI website and installed the entire contents of the
    distribution. After getting the error, I have tried uninstalling and
    reinstalling several times, with the same result.
    Is there some way I can troubleshoot this? Is there a configuration
    file or a registry entry I can check to see where LabVIEW is looking
    for the run-time?

    Michael,
    As Dennis said you need to make sure the version of the Runtime Engine matches the version of LabVIEW the executable was created with.
    You can find different versions of the Runtime Engine on our webpage here.
    Regards,
    Simon H
    Applications Engineer
    National Instruments

  • VISA Write differs between TS Development System and LV Run-Time Engine

    Hi all
    I made an application on LabVIEW to test BERs (Bit Error Rates), and I used VISA Write between two COM ports to exchange data.
    Everything works fine using just LabVIEW.
    Afterwards, I used TestStand to call my application (VI). The LabVIEW adapters from TestStand were set to Development System by default, and everything works OK!!
    Finally, I needed to disable the development system, and set the LabVIEW adapters from TestStand to LabVIEW Run-Time Engine and I notice that the speed of the data exchange between the two COM ports decreased dramatically.
    The only difference was the speed...because all the data (changed slowly in this case) arrived correctly on the other COM port too.
    The symptom was the same as decreasing the baud rate...but the baud rate and all the other configurations remained the same. The only difference was the change between Develpment System to Run-Time Engine to notice this decreased speed between the exchanged data using VISA Write.
    Any solutions for this?
    Thanks in advance
    Joao
    Solved!
    Go to Solution.

    Joao,
    you state that using the LV Developement System as execution platform for your LV code modules result in faster datatransfer between the COM ports than using the LV Run-Time Engine.
    So i am pondering: Does this refer to TS at all?
    Please check the following:
    Run you communication using a sole LV application in LV Developement System. This should be fast. Now build an executable of this application and run that one. Do you see the same behavior?
    If there is no difference in a sole LV approach, there have to be some settings in the TS approach making this slow. So please let us know:
    Are there different modules involved in that data transfer (which in fact points to the reply Christophe made)?
    What about loading/unloading options of the modules?
    How big is the hierarchy of the modules, e.g. is it necessary for the RTE to load stuff the Dev Env has already in memory due to loading a lvproj.......?
    Could you provide a simple example sequence+modules showing this behavior?
    What versions of LV and TS are you using?
    hope this helps,
    Norbert
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • LabVIEW VI with Report Generation Toolkit elements in a TestStand sequence does not run with a LabVIEW 8.5 Run-Time Engine

    Hi all,
    I am using LabVIEW 8.5.1 and TestStand 4.1. I have done a TestStand sequence with a VI in it, which uses Report Generation Toolkit elements. On my machine I am using LabVIEW and TestStand with a Development System license. On the other machine I am using TestStand with a Base Deployment license and I have chosen the LabVIEW 8.5 Run-Time Engine in the Adapter Configuration. Everything is running well except of this VI with Report Generation Toolkit elements. The error message is showing that the VI is not executable. It works well only after I have installed LabVIEW with an Evaluation license and chosen LabVIEW 8.5 Development System in the Adapter Configuration.
    I have found other posts and a document in the KnowledgeBase with a similar problem: http://digital.ni.com/public.nsf/allkb/8A0E6274D9B​D7B1986256F62006AD402?OpenDocument But I am not using EXE files in my sequence, so I don't know how to solve mine. Anybody has an idea?
    Solved!
    Go to Solution.

    Hello guys,
    thank you very much for your answers!
    @Ruediger:
    I tried to follow the instruction for Method 2 in the mentioned document: http://digital.ni.com/public.nsf/allkb/F3DC40A6E3F​3B25B862570AD005D1D3D?OpenDocument, but the steps on my machine are different starting from step 4. After I click "Continue..." in step 3, I dont get a window, the system just makes a new folder with the same VI. 
    To be honest, I am new to LabVIEW and have some difficulties at this time. What I understood from your reply is, that I need to make a LLB-File, where the files from Report Generation Toolkit are in!?
    @GovBob:
    I was following the instruction in the document: http://digital.ni.com/public.nsf/allkb/9E00E7EFE06​35E678625734600779EFE, but it wasnt working. Can you please tell me how I can check if the VI Server is installed and running on the machine?
    I am using LabVIEW 8.5.1 and TestStand 4.1 on my machine, on the deploy machine there is TestStand 4.1.1. The version of my Report Generation Toolkit is 1.1.2.
    Kind regards, Roman

Maybe you are looking for