Run-Time Error window doesn't have Retry and Ignore options

Hi,
The run-Time Error window usually have 4 bullets at the bottom part. They all used to be enabled untill recently. Somehow, I only have the Run Cleanup and Abort immediately bullets enabled. Why are the Retry and Ignore disabled? Is there an option to turn it on and off?
Thanks
Rafi

Hi,
Its possible you have operator privileges. What's user type are you running as?
Regards
Ray Farmer
Regards
Ray Farmer

Similar Messages

Trapping Run-Time Errors

We have defined a Setup Function in a sequence we are running. When a 'FAIL'
is returned from this function a run-time error is generated and a run-time
error window is displayed. Is it possible to trap this error and not display
the window in certain circumstances? The function generating the error is
TX_RunSeqOrTest().
We are running LabWindows 5.0 and TestExecutive 2.0.1.
We would appreciate any help.
Joe Colson

You can prevent LabWindows from breaking on library
errors with SetBreakOnLibraryErrrors(). I don't know if
this will work for TestExecutive functions.
Regards,
Reed.
Reed Blake
Beta Technology
Industrial and Scientific Computing
example:
int break_state, status
break_state = SetBreakOnLibraryErrors (0); // Disable break on library
errors
status = GetFileSize (name, &file_size); // Labwindows library
function
SetBreakOnLibraryErrors (break_state); // Restore break state.
Joe Colson wrote in message <[email protected]>...
>
>We have defined a Setup Function in a sequence we are running. When a
'FAIL'
>is returned from this function a run-time error is generated and a run-
time
>error window is displayed. Is it possible to trap this error and not
display
>the window in certain circumstances? The function generating the error is
>TX_RunSeqOrTest().
>We are running LabWindows 5.0 and TestExecutive 2.0.1.
>
>We would appreciate any help.
>
>Joe Colson

Run Time Errors (Don't show this dialog again...)

We often create some long TestStand (TS 4.0) sequences and run them overnight or weekend.  Occasionally, for one reason or another, we may see the "Run Time Error" messagebox pop up, stopping the test sequence.
If you then select the checkbox in the Run Time Error window "Don't show this dialog again for this execution", the sequence will continue.
Is there a way to set up TestStand to ALWAYS ignore the Run Time Errors and just generate a failure error instead?
     Setup for TestStand as a confuguration?
or
     Setup as a command in our Custom Steps?
Mikef

Hi Mikef,
One solution would be to use the SequenceFilePostStepRuntimeError callback sequence. Have a look at the example ErrorHandlerExample.seq in the TestStand\Examples\Callbacks\PostStepRuntimeErrorCallback folder.
Obviously you wont what a dialog to appear, but using the callback, you can reset the Step.Result.Error, maybe set the status and record that an error did occur in the Steps ReportText.
Hope this helps.
Regards
Ray Farmer
Regards
Ray Farmer

Run-time error R6025 exiting Labview

After I modify a VI and/or Project, I exit from labview by clicking on file->exit. It will generate a R6025 run-time error. If I just open and close labview, this will not occur.
I am running Labview 8.0.1 on windows XP.

Humm…..
Sorry to hear that the Norton configuration is locked down,
because we have about half a dozen instances of this error occurring and all
but one were fixed by changing the Norton settings.
There are a couple of other questions that I didn’t ask but
might be relevant if there is to be any workaround. Are you running any VIs
before closing LabVIEW, or just modifying them?
Does this happen on every VI you use, or just on a particular VI? Is there anything else unusual about the
development machine – do you have a different version of Win XP (such as media
edition, or tablet)? Do you have the
same problem with other computers? Would
you be allowed to temporarily disable the script blocking in Norton while you
work in LabVIEW?
I don’t know what role (if any) NI Serial might have in
this, but if you are interested in getting that driver, you can find it here: http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BE600707F28?opendocument&node=1...
Thanks again for the reply, let me know how things go-
Travis M
LabVIEW R&D
National Instruments

Run time error while closing the CRM Order using BAPI

Hi Experts,
Need your invaluable suggestions here.Apologies for the lengthy mail, intention is to give clear idea of the issue.
I am facing an issue while closing the CRM orders. According to our business process, when an issue is solved we will keep the order in resolved status only. We will not directly close the order from the CRM tool, instead we have created a custom program for the same purpose.
For the custom program we will give input as the order number and execute it, this will close the order.
Here close the order means assigning it to Close status as well assign the reason code.
We have created some reason codes for closed status.
So when the program is run the Order moves from resolved status to closed status along with reason code.
But of late we are facing some problems with this program, it is giving run time error for some CRM orders.
Run time error message : The ABAP/4 Open SQL array insert results in duplicate database records.
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught in procedure "CRM_SERVICE_OS_UPD_OST_DU" "(FUNCTION)", nor was it propagated by a RAISING clause.
Please find my code which have used in the custom program
Closing the resolved SOs in the system
    CALL FUNCTION 'CRM_STATUS_CHANGE_EXTERN_OW'
        EXPORTING
          objnr                     = iv_guid
          user_status          = lc_status_closed
       EXCEPTIONS
         object_not_found          = 1
         status_inconsistent       = 2
         status_not_allowed       = 3
         OTHERS                        = 4.
    IF sy-subrc <> 0.
      WRITE : 'Error at maintaining status'.
    ENDIF.
Set reason code
build lt_subject
    ls_subject-ref_guid = iv_guid.
    ls_subject-katalogart = 'A2'.
    ls_subject-codegruppe = 'ZR000003'.
    ls_subject-code       = 'ZR33'.                      " Reason code
    ls_subject-mode       = 'A'.
    APPEND ls_subject TO lt_subject.
build lt_ossset
    ls_osset-ref_guid        = iv_guid.
    ls_osset-subject_profile = 'ZREASON03'.
    ls_osset-profile_type    = 'G'.
    ls_osset-subject         = lt_subject.
    APPEND ls_osset TO lt_osset.
build lt_service_os
    ls_service_os-ref_guid = iv_guid.
    ls_service_os-ref_kind = 'A'.
    ls_service_os-osset     = lt_osset.
    APPEND ls_service_os TO lt_service_os.
build lt_input_fields
    REFRESH: lt_input_fields, lt_field_names.
    CLEAR : ls_input_fields, ls_field_names.
    ls_field_names-fieldname    = 'CODE'.
    APPEND ls_field_names TO lt_field_names.
    ls_field_names-fieldname    = 'CODEGRUPPE'.
    APPEND ls_field_names TO lt_field_names.
    ls_field_names-fieldname    = 'KATALOGART'.
    APPEND ls_field_names TO lt_field_names.
    ls_field_names-fieldname    = 'SERVICE_PROFILE'.
    APPEND ls_field_names TO lt_field_names.
    ls_input_fields-ref_guid    = iv_guid.
    ls_input_fields-ref_kind    = 'A'.
    ls_input_fields-objectname = 'SERVICE_OS'.
    ls_input_fields-field_names = lt_field_names.
    APPEND ls_input_fields TO lt_input_fields.
     CALL FUNCTION 'CRM_ORDER_MAINTAIN'
      EXPORTING
        it_service_os     = lt_service_os
      CHANGING
        ct_input_fields   = lt_input_fields
      EXCEPTIONS
        error_occurred    = 1
        document_locked   = 2
        no_change_allowed = 3
        no_authority      = 4
        OTHERS            = 5.
    IF sy-subrc <> 0.
      WRITE : 'Error at maintaining reason'.
    ENDIF.
    CALL FUNCTION 'CRM_ORDER_SAVE'
      EXPORTING
        it_objects_to_save   = lt_header_guid
        iv_update_task_local = lv_update_task_local
      IMPORTING
        et_saved_objects     = lt_saved_objects
      EXCEPTIONS
        document_not_saved   = 1
        OTHERS               = 2.
    IF sy-subrc <> 0.
      WRITE : 'Error at saving'.
    ELSE.
      WRITE : 'Successfully Closed'.
      COMMIT WORK AND WAIT.
    ENDIF.
Run time error is coming at COMMIT WORK AND WAIT statement.
Please let me know any corrections are required in the above program.
When I analyzed the run time error I have found that it trying to insert the record in CRMD_SRV_OSSET for that CRM order, but already one record is present in the table for the same CRM order number.
For most of the CRM orders there is no entry in this table so they are closing successfully but for a few orders for which there is an entry we are getting the above run time error.
There is nothing wrong with the orders which have an entry already in the table CRMD_SRV_OSSET, I need to close these kind of orders with out run time error.
Kindly provide your feedback.

Hi Dinakar,
You posted this in APO PPDS forum. This question should go to PP forum where someone could answer it.
Please close this thread and open a new thread in PP forum so that you could get help quickly from the relevant experts.
Regards - Pawan

Run Time Error when attempting to use pse 10 editor

While using the editor in PSE 10, it suddenly stopped working, giving me a "run time error" message. I have created a new user account, created restore points on my PC, attempted to change the preference files, all to no avail. The software came installed on my PC, so I'm unable to do an uninstall and reinstall as I don't have the installation CD. The PC manufacturer and Adobe support have been unable to help (neither providing me with a product key). Can someone help me fix the "run time error"? Until it's fixed, the product is unusable.

Can you share the exact error message or probably a screenshot which might help us reviewing it and suggest you any solution.
Thanks,
Garry

Run time error 13

Hi,
When several users try to access their input templates, they
receive this Microsoft Visual Basic message run time error 13. They have been able to
access the template in the past, but are having problems with the new
category.
Please Advice
Thanks,
Raghu.

Hello Raghu
Not sure if you get this error message due to the same reason that we do, but this is our solution/workaround for it:
First uninstall the Cpm client.
   ·         Remove settings in the registry. Start - Run - Regedit: VB
   and VBA program settings and outlooksoft (of if it's calld SAP)
   ·         Rename your local outlooksoft folder located in my documents
   (outlooksoftold for example. )
   ·         Install the cpm client
Best regards
Jonas

When access BW from Crystal I get: run-time error '-2147417848(80010108)'

Installed Crystal and the SAP int Kit in the correct order. I can access R/3 but get an error when trying to access BW:
run-time error '-2147417848(80010108)'
Then Crystal crashes and shuts down.

Yep, I have the same... The only one solution for me for now is open report, then log in to BW using toolbar icon from SAP integration kit bar. Only after that you can work with this report without crash.

Run-time error 9 subscript out of range in WAD open

Hi All,
When i open the WAD, I am getting the following error msg
Run-time error 9
Subscript out of range
and it is killing the logon and screen.
It is not happening to all the WAD, only for few of them,
please give me the tips.
Thanks
Billy

Thanks for the answer.
I resolved it by replacing librfc.dll. There is a sap note to explain this issue.
the reason for the problem is..
If the web template has a bigger one then this problem is occurs.
Thanks
Billy

DIM-00035 You have entered and invlaid option for the -EDIT command

Hi Experts,
I am creating oracle instance using oradim utility. I am using oracle 9.2 on windows 2003 server.
I have installed oracle 9.2 and created ORCL database as part of installation. Now I have deleted ORCL database using DBCA. Now I try to create a new DB instance.
I ran the below command:
c:\>oradim -NEW -SID <sidname> -SRVC OracleService<SID> -INITPWD <password> -pfile <pfilepath>
I am getting the below error:
DIM-00035 You have entered and invlaid option for the -EDIT command
Please help me why I am getting this error even though I am creating new service.
Thanks.

The definition for INITPWD is:
-INTPWD password is the password for the new instance. This is the password for the user logged in with SYSDBA privileges. Option -INTPWD is not required. If you do not specify it, then operating system authentication is used, and no password is required.
The passwords for SYS and SYSTEM are created later - when the database itself is created. Nevertheless the error message is strange, there is no -EDIT option in the command. Moreover -NEW and -EDIT are mutually exclusive.
Werner

Error installing itunes win 7 home . Run time error R6034 and Error 7 windows error 1114

I receive these error messages trying to re-install itunes:
Run time error R6034 and
Error 7 Windows error 1114.
started happening about a week ago.
Any help?
I tried removing and reinstalling already, same mesages
G

Check for .dll files Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files. If you find QTMovie.DLL, or any other .dll files, move them to the desktop. Reboot your computer. Note: Depending on your operating system, you may only have one of the listed paths.
So they want me to put all of the DLL files to desk top? I dont have any that have QTmovie
I have:
In itunes .resources folder:
itunes.dll
itunesRegistry
In itunesHelper.resources folder
ituneshelper.dll
In Itunes main folder: ie. program files (x86) Itunes
gnsdk_dsp.dll
gnsdk_musicid.dll
gnsdk_sdkmanager.dll
gnsdk_submit.dll
iAdCore.dll
itunes.dll
itunesadmin.dll
ituneshelper.dll
itunesoutlookaddin.dll
Sorry I'm not a real computer dude but would like to resolve and not lose all my music etc.
Thanks
G

Automatic Retry run-time error step in TestStand

Hi, I am using an instrument at many places in my sequence (let's say 5 times). I am using the Labview instrument driver. Sometimes (every 50 calls), the instrument driver call gives me a run-time error because the instrument is somehow busy. But usually by doing a retry on the step that caused the run-time error, it works. However, in few cases, the instrument is really defective. In order to make my sequence more robust, I want all that handled in TestStand (I want the operator to stay away from the big grey popup. Many of them freaks out when they see this…). I was thinking adding 2 callbacks to my sequence: 1) Post run-time error: a. If local “index” == 1, run cleanupb. If “index” == 0, retry the current step (by manipulating the current step id)c. Incrementing “index” to 12) Post step:a. If step.Result.Status != “Èrror”, ”index” = 0 Index is a local variable in my sequence This algo might work, but is there another way of doing this? You can loop on the failures, but not on the errors.
Thanks
Alexandre

Alexandre,
there are many ways to accomplish your task.
Here's a small list:
- Disable default error handling and "do error handling in your sequence" (using gotos with precondition)
- Use the SequenceFilePostStepRuntimeError Callback
- Handle the retry-functionality within your codemodule
I'd suggest you to choose either the second or third option. As Juergen already stated, you can alter the behaviour of TS in regard to runtime errors. The default behaviour displays a dialog asking the operator on how to react. On automated systems, this setting is nonsense, therefore it is suggested to switch to "Run Cleanup". I wouldn't choose any other setting here.
Using the Callback Sequence is nice since it can be used in a very general way and you can call certain alternativ test strategies if the instrument fails to work.
Implementing the error handling within the codemodule nevertheless optimizes execution times and could be better in other aspects as well. But on the other side, you have to deside what should happen if the error cannot be solved by the module itself.....
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Run time error '9' while installing BIP Desktop 10.1.3.4.1 for Windows

Hi,
I've been getting 'run time error '9' Subscript out of range error while installing BIP Desktop.
I have MS Word 2003 and the laptop's OS is Windows XP SP3. I have searched the net and this forum for suggestions
and followed what was recommended (install .NET framework 2.0, make sure no MS Office processes are not running while
installing the software, Admin rights at Registry level on BI Publisher folder etc..) but no use.
This is a new laptop which I just received. On my existing laptop (which has similar configuration), I've installed BIP long time
ago and do not remember facing this error. If any one has come across this problem recently and was able to trouble shoot it,
please share with me how you were able to overcome the problem.
Thanks and Regards,
Srini

Hello,
Since I haven't heard from any one, I have opened a service request with Oracle support.
Support recommended that I down load a desktop publisher from edelivery.oracle.com but even that didn't help.
Will keep you posted.
Regards,
Srini

Have Elements 11 and I get a Run Time Error when going into editor?

I have Elements 11 and I am getting a run time error when I select editor. It worked 2 weeks ago and now I get the message. I use Windows 7 and it nothing has changed in the past two weeks that I know of. The error is Microsoft Visual C ++ runtime Library

Windows was installed in 2013, so it is whatever that dumb version was with
no 'off'...
I have Photoshop Elements 10.0
I have no idea what an optimized computer means.
When I say 'either editor' I mean I can't use the Full or Quick editor,
they both produce the same message stream.
As follows:
   Box pops up that is Microsoft Visual C ++ Runtime Library with the
message:
    Runtime Error
    Program : C:\Program files
    THis application has requested the Runtime to terminate it is an
unusual way....
   PLease contact the application support team for more information
If I click the OK button then I get an Adobe Photoshop Elements 10 box that
pops up which says
"Elements 10 has stopped working"
I have no problem downloading images into the program or renaming files or
pulling images back out I just can't edit.
Hope that helps.
Leslie
On Tue, Mar 31, 2015 at 11:27 AM, A.T. Romano <[email protected]>

I have downloaded the new itunes but when I go to open it, it says "run time error"? it also says an application has made an attempt to upload this file incorrectly?

I just downloaded the new itunes so I can sync music to my iphone 5 and when I go to open the new itunes, a message pops up that says "Run time Error, an application has made an attempt to upload this file incorrectly"?

Hello there, tmiller25.
The following Knowledge Base article offers up some great steps for troubleshooting your issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Run-Time Error window doesn't have Retry and Ignore options

Similar Messages

Maybe you are looking for