Run Time Errors (Don't show this dialog again...)
We often create some long TestStand (TS 4.0) sequences and run them overnight or weekend. Occasionally, for one reason or another, we may see the "Run Time Error" messagebox pop up, stopping the test sequence.
If you then select the checkbox in the Run Time Error window "Don't show this dialog again for this execution", the sequence will continue.
Is there a way to set up TestStand to ALWAYS ignore the Run Time Errors and just generate a failure error instead?
Setup for TestStand as a confuguration?
or
Setup as a command in our Custom Steps?
Mikef
Hi Mikef,
One solution would be to use the SequenceFilePostStepRuntimeError callback sequence. Have a look at the example ErrorHandlerExample.seq in the TestStand\Examples\Callbacks\PostStepRuntimeErrorCallback folder.
Obviously you wont what a dialog to appear, but using the callback, you can reset the Step.Result.Error, maybe set the status and record that an error did occur in the Steps ReportText.
Hope this helps.
Regards
Ray Farmer
Regards
Ray Farmer
Similar Messages
-
Run time error has requested that this program be closed in an unusual way
i keep getting this message when i am using firefox. it says run time error has requested that this program be closed and it says it is the c drive firefox. what can i do to fix this? it has happened about 10 times a day for the last 3 days.
thank youHi there
log in as administrator and kill all processes not needed and try again. I've seen cases where one of these free download tweak applications (like "Memory Defragmentation" and stuff like that) caused that error.
Best regards
chris
CL(A)Dly bending G-Force with LabVIEW
famous last words: "oh my god, it is full of stars!" -
How to get back box : "Don't show this message again".
At some point, I have clicked "yes" on a box that said "Don't show this message again". It was by deleting tracks from iTunes library.
Now I want "my box" back. How can I fix that?
Dell 8400 Windows XPhi Bevers!
what used to work for this was rebuilding the itunes preference files.
although the user tip is on a different topic, the technique for doing this is outlined here:
Scott P: My source list is missing
... my dear The Mimico Kid is my authority on this topic: if you're around, would you mind stopping by to confirm or deny if this is still what Bevers should try?
love, b -
There was an option, provided by itunes, while updating ios, saying 'download and update', 'download only', 'cancel'. I accidentaly checked 'don't show this message again'. and now i want to change my preference. How to get it back please?
hello , i did exactly the same thing , and my app store icon look like this :
http://i.imgur.com/FIrph.png
so can you tell me how did your friend send the app store for you? please -
How to display "Non-Fatal Run-Time Error In Function Panel" dialog?
I'm learning how to develop an IVI-C specific driver using LabWindows/CVI. When I run my function from its function panel and it returns an error, I would like to display a dialog with both the error code and error message (as opposed to simply returning an error code on the function panel). This would save the user from having to call Prefix_error_message() to translate the error code to its error message. NI-DCPower driver is a good example of this behavior (see attached error dialog). How do I show the "Non-Fatal Run-Time Error In Function Panel" dialog? Any help is greatly appreciated. Thanks!
Attachments:
ErrorDialog.png 8 KBHi Shawn,
Thank you for replying to my post. The checkErr is just an error handling macro defined in ivi.h to goto Error: tag when the function returns a non-zero value. I have been using the checkErr macro (as well as viCheckErr and other macros) in my driver.
Using the same hp34401a specific driver as an example, please allow me to explain my question in more details:
Let's take the hp34401a_close function as an example. It is a simple function with only a few lines of code:
When the hp34401a_close function is run from its front panel using an invalid session handle (e.g. "8" in this screen capture):
You will get three "Non-Fatal Run-Time Error" popup dialogs, one from each of the IVI library functions that it calls: Ivi_LockSession, Ivi_UnlockSession, and Ivi_Dispose. However, there is no "Non-Fatal Run-Time Error" popup dialog from the hp34401a_close itself.
My IVI-C specific driver is behaving identical to the hp34401a specific driver.
In comparison, if run niDCPower_close function from its front panel using an invalid session handle (using the same "8" in this screen capture):
You will only get one "Non-Fatal Run-Time Error In Function Panel" from the niDCPower_close function itself:
I think the behavior of niDCPower driver is much better than the hp34401a driver. It replaces the three "Non-Fatal Run-Time Error" popup dialogs from the IVI library with a single "Non-Fatal Run-Time Error In Function Panel" popup dialog from the driver function itself. I would like to do the same thing with my driver but have not figured out how to display a "Non-Fatal Run-Time Error In Function Panel" dialog. Thanks in advance for your help! -
Dear ALL,
When we are creating sales order after entering sold-to-party, Material & Quantity when we press ENTER key That time
we are getting following run time error
Hoe to resolve this?
Runtime Errors SAPSQL_INVALID_FIELDNAME
Except. CX_SY_DYNAMIC_OSQL_SEMANTICS
Date and Time 15.01.2009 16:04:19
Short dump has not been completely stored (too big)
Short text
A dynamically specified column name is unknown.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLV61Z" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
not caught in
procedure "SEL_KONDTAB" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
An Open SQL clause was specified dynamically. The contained field name
"ALAND" does not exist in any of the database tables from the FROM clause.
How to correct the error
Check the field name in the SELECT clause.
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"SAPSQL_INVALID_FIELDNAME" "CX_SY_DYNAMIC_OSQL_SEMANTICS"
"SAPLV61Z" or "LV61ZU01"
"SEL_KONDTAB"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"SEL_KONDTAB" "(FORM)", or its possible occurrence must be declared in the
RAISING clause of the procedure.
To prevent the exception, note the following:
System environment
SAP-Release 700
Application server... "slgsap-prd"
Network address...... "10.140.1.11"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "8x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "SLGSAP-PRD"
Database type..... "MSSQL"
Database name..... "PRD"
Database user ID.. "prd"
Terminal................. "SD0123l"
Char.set.... "C"
SAP kernel....... 700
created (date)... "May 6 2008 00:13:21"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 159
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 16192
EM...... 20949200
Heap.... 0
Page.... 196608
MM Used. 15928048
MM Free. 828016
User and Transaction
Client.............. 900
User................ "ADMIN"
Language key........ "E"
Transaction......... "VA01 "
Transactions ID..... "03F0E2DD6B35F16CBBFF002219897F24"
Program............. "SAPLV61Z"
Screen.............. "SAPMV45A 4900"
Screen line......... 930
Information on where terminated
Termination occurred in the ABAP program "SAPLV61Z" - in "SEL_KONDTAB".
The main program was "SAPMV45A ".
In the source code you have the termination point in line 672
of the (Include) program "LV61ZU01".
The termination is caused because exception "CX_SY_DYNAMIC_OSQL_SEMANTICS"
occurred in
procedure "SEL_KONDTAB" "(FORM)", but it was neither handled locally nor
declared
in the RAISING clause of its signature.
The procedure is in program "SAPLV61Z "; its source code begins in line
260 of the (Include program "LV61ZU01 ".
Source Code Extract
Line SourceCde
642 if se_prestep = yes or
643 se_read_only_one_record = yes.
644 if t681-ksdat is initial.
645 if se_read_all_prestep is initial.
646 select * from (t681-kotab) appending table <cond_tab>
647 up to 1 rows
648 where kappl = se_kappl
649 and kschl = se_kschl
650 and (coding_tab).
651 h_subrc = sy-subrc.
652 else.
653 select * from (t681-kotab) appending table <cond_tab>
654 where kappl = se_kappl
655 and kschl = se_kschl
656 and (coding_tab).
657 endif.
658
659 * it is enough to find one record in prestep
660 * (care must be taken with pool tables - depending on database this
661 * will cost performance instead of saving)
662 if select_split ne 0 and h_subrc ne 0.
663 modify coding_tab from coding_alter index select_split.
664 select * from (t681-kotab) appending table <cond_tab>
665 up to 1 rows
666 where kappl = se_kappl
667 and kschl = se_kschl
668 and (coding_tab).
669 endif.
670 else.
671 if se_read_all_prestep is initial.
>>>>> select * from (t681-kotab) appending table <cond_tab>
673 up to 1 rows
674 where kappl = se_kappl
Regards,
Akshay
Edited by: Akshay Dalal on Jan 17, 2009 6:25 AM
Edited by: Akshay Dalal on Jan 17, 2009 6:30 AMDear Akshay,
We will NOT be able to provide you with a solution on this forum, because we have no clue what configuration do you have in your system and what user exits or other custom development may have been done in your specific system.
Lakshmipathi has already correctly pointed to a similar post. You might want to get an ABAPer to set a breakpoint just before the error occurs, then he/she might provide you with more information, which may (or may not) be helpful.
There is obviously something wrong in the pricing condition either on configuration level or in a user exit. If you write to SAP (which you should, because it's a standard program), they will ask to connect to your system, because they don't have any chrystal balls over there either.
Just in case - before going any further, try running the program RV80HGEN (in the test system, of course), which re-generates requirements and formulas. Sometimes it helps, although I doubt that it is the case here.
Also if you've used some custom (Z...) fields in the pricing configuration, that's where the problem is most likely. -
VB Run time error '1004' in SEM BPS layout
Hi,
When I run a layout and activate the standard SAP macro, a Visual basic error message " Run Time error '1004' " appears.
This error has been resolved after I made the following settings.
TOOLS --> MACRO --> SECURITY --> Trusted Publishers --> check flag "Trust Access to Visual Basic Project".
Does each user has to make this setting? Isn't there a setting for SAP macros to attach a trusted digital signature that automaticaly takes care of this error w/o having each user make this setting?
I heard, a setting has to be made in Trusted Publishers to accept "SAPAG".
But, I don't see this in Trsuted publishers list.
I don't see this error in Excel 97 but in Excel 2003. How do I know which versions of excel gives this error to educate our users about this error.
Appreciate any help.Hi anil1121,
Since this is not a vb.net issue, and based on your description, I would recommend you post this issue in
http://social.msdn.microsoft.com/Forums/en-US/home?forum=officegeneral forum to get supports.
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Hi every one
im facing a problem while using the WAD... when i push the map icon to the right it gives me always the error: 'run time error 9'...
this only happens to me here... in other computers theres no problem...
im using sap logon 6.40 (patch level 23)
any ideas???
really urgentI've done a checkserver with sapbexc (server check) and the result in the mapobjects:
MapObjects
af20.dll Not found Not found Not found
aiimage20.dll Not found Not found Not found
dforrt.dll Not found Not found Not found
efileio.dll Not found Not found Not found
elib.dll Not found Not found Not found
ergxlib.dll Not found Not found Not found
ethrlib.dll Not found Not found Not found
iso8211.dll Not found Not found Not found
libtiff.dll Not found Not found Not found
memfile.dll Not found Not found Not found
memtable20.dll Not found Not found Not found
mo20.ocx Not found Not found Not found
mo20.lic Not found Not found Not found
mobase.dll Not found Not found Not found
mofeat.dll Not found Not found Not found
mogridio.dll Not found Not found Not found
mtch.dll Not found Not found Not found
pe.dll Not found Not found Not found
sg.dll Not found Not found Not found
shape20.dll Not found Not found Not found -
Run time error in report for a particular month : " TIME_OUT"
hi frends, we have developed a report for PM module in SAP. it is a monthy report. and user have to enter the month for which he wants to see the report. we are facing runtime error for a particular oct. and nov month of 2009 only , all other months are working fine. The error is :
The program "ZPMR_EQUP_PERFORMANCE_REPORT" has exceeded the maximum permitted
runtime without
interruption and has therefore been terminated.
what could be the reason.Hi Achalmehra,
By seeing the run time error "TIME_OUT", I suspect this is due to Performance issue.
There is a chance that they had huge data dump into PM server from other servers and there is also chance that
They have many records available for these 2 months.
IN any case, please chk with Run time analysis (SE30) by executing your program...
If it displays the graph more than 30 % for Database then it is an issue with the Performance.
Also chk with SQL trace.....
Second case :
Check you had not used Nested Loops, Select queries in Loop.
Make sure you use Binary search for Read Statements....
Third : Chk with the runtime error at which place of the code it is throwing Time_out error at Source code extract.
To help you further, please paste your code here and also paste the Run time error that you receive with the select queries.
Regards,
Kittu -
Run-time error "CONVERSION_CODEPAGE_UNKNOWN" occurred in BW SapNetweaver.
Today I have problem with this error dump: Run-time error "CONVERSION_CODEPAGE_UNKNOWN"
I got this problem from rspc chain manager but also from another place as place a filter on table VARI.
I suspect that this include "IMPORT_VARIANT_STATIC" got problem of the (Include)
program "RSDBSPVD".
This is first time that I got this error.
I think problem was linked to VARI tables and include IMPORT_VARIANT_STATIC in this program RSDBSPVD
Runtime Errors CONVERSION_CODEPAGE_UNKNOWN
Date and Time 03.06.2008 14:27:46
|Short text
| Unable to convert from code page ' ' to code page '4103'. |What happened?
Error in the ABAP Application Program
The current ABAP program "RSDBSPVD" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
One of your chosen conversion tables (CODE PAGE) ' ' or '4103'
is unknown to the system.
For a list of conversion tables known to the system, see table
| TCP00. To display this, use Transaction SPAD.
Active Calls/Events
No. Ty. Program Include Line
Name
4 FORM RSDBSPVD RSDBSPVD 119
IMPORT_VARIANT_STATIC
3 FORM SAPLSVAR LSVARF07 522
IMPORT_VAR_SELC
2 FUNCTION SAPLSVAR LSVARU07 80
RS_VARIANT_CONTENTS
1 EVENT RS_VARIANT_VALUES RS_VARIANT_VALUES 22
| START-OF-SELECTIONSorry, but my Sap Netweaver 2004s is a build 700.
I'm manually imported this table, before I exported table VARI from an old database of this istance. (db2 dart /ddel 'table space number' 'table id number')
log about vari import table:
SQL3501W The table space(s) in which the table resides will not be placed in
backup pending state since forward recovery is disabled for the database.
SQL3109N The utility is beginning to load data from file
"D:db2BW2db2dumpDART000025".
SQL3500W The utility is beginning the "LOAD" phase at time "05/29/2008
18:56:04.266758".
SQL3519W Begin Load Consistency Point. Input record count = "0".
SQL3520W Load Consistency Point was successful.
SQL3114W Some data following """" in row "F0-1242" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-1243" and column "10" was not
loaded.
SQL3227W Record token "F0-1242" refers to user record number "6536".
SQL3227W Record token "F0-1243" refers to user record number "6537".
SQL3114W Some data following """" in row "F0-1958" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-1959" and column "10" was not
loaded.
SQL3114W Some data following "u0178õ o½@: s]ªÂÅúõB'r" in row "F0-1959" and
column "11" was not loaded.
SQL3114W Some data following """" in row "F0-1969" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-1974" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1634" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1981" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1982" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1983" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1995" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1996" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-1998" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2009" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2010" and column "10" was not
loaded.
SQL3114W Some data following "u0178õ o½@: s]ªÂÅúõB'r" in row "F1-2010" and
column "11" was not loaded.
SQL3114W Some data following """" in row "F1-2012" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2023" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2026" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2037" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2040" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2051" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2052" and column "10" was not
loaded.
SQL3114W Some data following "u0178õ o½@: s]ªÂÅúõB'r" in row "F1-2052" and
column "11" was not loaded.
SQL3114W Some data following """" in row "F1-2054" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2065" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2066" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2068" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2079" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-2082" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2240" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2243" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2253" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2254" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2255" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2266" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2267" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2269" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2280" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2281" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F0-2282" and column "10" was not
loaded.
SQL3227W Record token "F0-1958" refers to user record number "11636".
SQL3227W Record token "F0-1959" refers to user record number "11637".
SQL3227W Record token "F0-1969" refers to user record number "11647".
SQL3227W Record token "F0-1974" refers to user record number "11652".
SQL3227W Record token "F1-1634" refers to user record number "11661".
SQL3227W Record token "F0-2240" refers to user record number "14014".
SQL3227W Record token "F0-2243" refers to user record number "14017".
SQL3227W Record token "F0-2253" refers to user record number "14027".
SQL3227W Record token "F0-2254" refers to user record number "14028".
SQL3227W Record token "F0-2255" refers to user record number "14029".
SQL3227W Record token "F0-2266" refers to user record number "14040".
SQL3227W Record token "F0-2267" refers to user record number "14041".
SQL3227W Record token "F0-2269" refers to user record number "14043".
SQL3227W Record token "F0-2280" refers to user record number "14054".
SQL3227W Record token "F0-2281" refers to user record number "14055".
SQL3227W Record token "F0-2282" refers to user record number "14056".
SQL3227W Record token "F1-1981" refers to user record number "14068".
SQL3227W Record token "F1-1982" refers to user record number "14069".
SQL3227W Record token "F1-1983" refers to user record number "14070".
SQL3227W Record token "F1-1995" refers to user record number "14082".
SQL3227W Record token "F1-1996" refers to user record number "14083".
SQL3227W Record token "F1-1998" refers to user record number "14085".
SQL3227W Record token "F1-2009" refers to user record number "14096".
SQL3227W Record token "F1-2010" refers to user record number "14097".
SQL3227W Record token "F1-2012" refers to user record number "14099".
SQL3227W Record token "F1-2023" refers to user record number "14110".
SQL3227W Record token "F1-2026" refers to user record number "14113".
SQL3227W Record token "F1-2037" refers to user record number "14124".
SQL3227W Record token "F1-2040" refers to user record number "14127".
SQL3227W Record token "F1-2051" refers to user record number "14138".
SQL3227W Record token "F1-2052" refers to user record number "14139".
SQL3227W Record token "F1-2054" refers to user record number "14141".
SQL3227W Record token "F1-2065" refers to user record number "14152".
SQL3227W Record token "F1-2066" refers to user record number "14153".
SQL3227W Record token "F1-2068" refers to user record number "14155".
SQL3227W Record token "F1-2079" refers to user record number "14166".
SQL3227W Record token "F1-2082" refers to user record number "14169".
SQL3114W Some data following """" in row "F1-9602" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F1-9603" and column "10" was not
loaded.
SQL3114W Some data following "u0178õ o½@: s]ªÂÅúõB'r" in row "F1-9603" and
column "11" was not loaded.
SQL3114W Some data following """" in row "F1-9612" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-9374" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-9375" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-9383" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-9397" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-9410" and column "10" was not
loaded.
SQL3227W Record token "F1-9602" refers to user record number "66049".
SQL3227W Record token "F1-9603" refers to user record number "66050".
SQL3227W Record token "F1-9612" refers to user record number "66059".
SQL3227W Record token "F2-9374" refers to user record number "66063".
SQL3227W Record token "F2-9375" refers to user record number "66064".
SQL3227W Record token "F2-9383" refers to user record number "66072".
SQL3227W Record token "F2-9397" refers to user record number "66086".
SQL3227W Record token "F2-9410" refers to user record number "66099".
SQL3114W Some data following """" in row "F2-11966" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-11969" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-12580" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F2-12581" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12270" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12273" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12274" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12283" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12286" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12287" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12295" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12299" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12300" and column "10" was not
loaded.
SQL3114W Some data following """" in row "F3-12308" and column "10" was not
loaded.
SQL3227W Record token "F2-11966" refers to user record number "83492".
SQL3227W Record token "F2-11969" refers to user record number "83495".
SQL3227W Record token "F2-12580" refers to user record number "86221".
SQL3227W Record token "F2-12581" refers to user record number "86222".
SQL3227W Record token "F3-12270" refers to user record number "86232".
SQL3227W Record token "F3-12273" refers to user record number "86235".
SQL3227W Record token "F3-12274" refers to user record number "86236".
SQL3227W Record token "F3-12283" refers to user record number "86245".
SQL3227W Record token "F3-12286" refers to user record number "86248".
SQL3227W Record token "F3-12287" refers to user record number "86249".
SQL3227W Record token "F3-12295" refers to user record number "86257".
SQL3227W Record token "F3-12299" refers to user record number "86261".
SQL3227W Record token "F3-12300" refers to user record number "86262".
SQL3227W Record token "F3-12308" refers to user record number "86270".
SQL3110N The utility has completed processing. "1053698" rows were read from
the input file.
SQL3519W Begin Load Consistency Point. Input record count = "1053698".
SQL3520W Load Consistency Point was successful.
SQL3515W The utility has finished the "LOAD" phase at time "05/29/2008
18:56:18.932604".
SQL3500W The utility is beginning the "BUILD" phase at time "05/29/2008
18:56:18.936928".
SQL3213I The indexing mode is "REBUILD".
SQL3515W The utility has finished the "BUILD" phase at time "05/29/2008
18:56:24.684630".
SQL3107W There is at least one warning message in the message file.
Number of rows read = 1053698
Number of rows skipped = 0
Number of rows loaded = 1053698
Number of rows rejected = 0
Number of rows deleted = 0
Number of rows committed = 1053698
Do you think that convert codepage errore is due to this warning message? -
Run time error on collapsing the catalog tree node
Hi Experts,
Scenario is of SAPCRM 7.0.
On the Catalog page we get a tree in the left pane with all the poducts listed.
We can expand/close the tree and see the products.
While i select - (minus) and close the node, the system throws a run time error.
Trace shows a run time error at SetItemPageSizeAction.
Please help if any of you have faced a similar issue.
Thanks,
RohitHi Ashok,
We have B2B webshop with ECC and CRM. Product catalog are all maintained in CRM.
Where do i exactly need to check the xcm settings ?
I went thru a bit with XCM but couldnt find the field mentioned by you.
Thanks in anticipation,
Rohit Sharma -
How to get "don't show this message" back?
I have Sony Xperia Z2.After Charging my phone a messege popped up(something about waterproofing) and accidentally clicked "don't show this message again".Is there any way for getting the message back?
Sorry,we are not aware of how to bring back mobile data message for now. The only way is to factory settings reset.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien -
DTW 2007B PL:7 - DTW always showing run time error on record key no. 1377
Hi,
I've encountered a strange problem while transferring Customer Master.
Firstly, the DTW throws error randomly asking for 'Ship To' Address along with given 'Bill To' Address.
Also, at Record Key No. 1377, DTW shows run time error & asks for debugging.
Once the debugging is started, it goes on & on with any probable end of debugging.
And if the debugging option is not chosen DTW crashes & the corresponding error file is blank.
If anyone had encountered similar problem, pls respond ASAP.
Thanks,
PrashantHi Kapil,
did you use a template for importing the BPMaster and BPAddress data ? Such error normally causes by wrong LineNum and wrong signs for type of addresses.
Please reffer to SAP note 899093 and 979116. This would be helpful.
Regards Steffen
PS. templates are located in <program folder>\SAP\Data Transfer...\Template\Template\oBusinessPartners -
Has anyone else seen the "Excel cannot complete this task with available resources" error message appear when Excel isn't even open? It keeps happening to me, and it's the strangest thing.
It seems like interacting with Excel files sometimes prompts it - for example, I just turned on my computer this morning, checked my email, and then opened Google Chrome to upload some Excel files. Excel hasn't been opened at any point since the machine
booted up, but this Excel error popped up while I was uploading the files.
Checked the Task Manager because I was baffled (not that this is the first time it's happened), and there's no Excel application running, just that silly error message. Choose OK on that error and a VBA run-time error message appears (not even sure if it's
Excel VBA or Word/Outlook but I assume it's Excel - it's the good old 1004, application-defined or object-defined error).
Debug is greyed out, so it won't let me debug to see what the problem is. Choosing End brings the "Excel cannot complete this task with available resources" message back for one final performance.
This happens on a not-infrequent basis: Excel isn't open, and I randomly get this set of Excel errors: 1) "cannot complete task", 2) VBA run-time, 3) "cannot complete task" again. Then it's done, until the next time it happens. Weird.
I have 32-bit Windows 7 and Excel 2013/2010/2007/2003/2002 (I know!) but the issue only started after installing 2013. I also get the "cannot complete this task" message regularly when working in Excel (generally with Power Pivot or something legitimately
memory-hungry though), and restarting the application does the trick. I don't mind a heads-up when I'm gobbling up too many resources, but when Excel's not even open, it's a bit ridiculous. It's like I have a zombie Excel! Does interacting with Excel files
via upload/moving around Windows Explorer actually trigger some sort of Excel action in the background?
Any ideas would be most appreciated!! Thank you :)Hi,
As the memory error messages , it can be very generic and don't always identify the real cause of the issue. We may try to use the KB that Mr. KR mentioned above to troubleshoot it.
On the other hand, if the file is xls format, we may convert to the new file format .XLSM and test.
http://www.experts-exchange.com/Software/Office_Productivity/Office_Suites/MS_Office/Excel/Q_28339883.html
Next, try to disable hardware graphics acceleration from File > Options > Advanced > Display section and disable Aero Themes (if you enabled) to check the results.
For the hangs and crashes issues, we may use ADPlus.vbs to troubleshoot:
http://support.microsoft.com/kb/286350/en-us
http://www.networksteve.com/exchange/topic.php/Excel_cannot_complete_this_task_with_available_resources_error,/?TopicId=39411&Posts=1
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Hope it's helpful.
George Zhao
TechNet Community Support -
How to clear this type of run time error
good eve,
i am migrating sql server procedures to oracle procedures
i am trying to execute char(39) function in plsql is the following way correct and if this way is correct i am getting
run time error like
create or replace
procedure Sel_subgroup(key in varchar2,gradename in varchar2)
as
gid res_grades.grade_id%type;
gn res_grades.gradename_en%type;
stid sub_topics.subtopic_id%type;
stn sub_topics.subtopicname_en%type;
cc res_grades.countrycode%type;
estid exsub_topics.exsub_topics_id%type;
estn exsub_topics.exsubtopicname_en%type;
d_stmt varchar2(500);
type ref_cursor is ref cursor;
rc ref_cursor;
begin
d_stmt :='SELECT RG.Grade_ID,RG.Gradename_'||key||',ST.SubTopic_ID,ST.SubTopicname_'||key||', RG.CountryCode,
Est.ExSub_Topics_ID, Est.ExSubTopicname_'||key||' from
Res_Grades RG INNER JOIN Sub_Topics ST ON RG.Grade_Id= ST.Grade_ID
INNER JOIN ExSub_Topics Est ON ST.SubTopic_ID = Est.Sub_Topics_Id
Where Gradename_'||key||' = '''||gradename||'''';
open rc for d_stmt;
loop
fetch rc into gid,gn,stid,stn,cc,estid,estn;
if rc%found then
dbms_output.put_line(gid||gn||stid||stn||cc||estid||estn);
else
exit;
end if;
end loop;
close rc;
commit;
end Sel_subgroup;the out screen result is:
Connecting to the database rasool.
Process exited.
Disconnecting from the database rasool.can u please help me,
thanking you,
prakashto samb,
It doesn't look like you are getting a runtime error. Is it possible your query is returning no rows?
If you are sure your query should be returning rows, you probably need to check if DBMS_OUTPUT is enabled in SQL Developer (View menu I think).my query is returning a row
where where 123=key and 'FUBAR'=gradename?
If so, you want 3 single-quotes at the end of the string, not 4:
You sure? I think 4 is correct.i am sure 4 is correct i have tried as per jeenesh said
to jeenesh
SQL> ed
Wrote file afiedt.buf
1 create or replace
2 procedure Sel_subgroup(key in varchar2,gradename in varchar2)
3 as
4 d_stmt varchar2(500);
5 begin
6 d_stmt :='SELECT RG.Grade_ID,RG.Gradename_'||key||',ST.SubTopic_ID,ST.SubTopicname_'||key||', RG.CountryCode,
7 Est.ExSub_Topics_ID, Est.ExSubTopicname_'||key||' from
8 Res_Grades RG INNER JOIN Sub_Topics ST ON RG.Grade_Id= ST.Grade_ID
9 INNER JOIN ExSub_Topics Est ON ST.SubTopic_ID = Est.Sub_Topics_Id
10 Where Gradename_'||key||' = '''||gradename||'''';
11 dbms_output.put_line(d_stmt);
12* end Sel_subgroup;
SQL> /
Procedure created.
SQL> set serverout on
SQL> exec Sel_subgroup('1','TEST');
SELECT RG.Grade_ID,RG.Gradename_1,ST.SubTopic_ID,ST.SubTopicname_1,
RG.CountryCode,
Est.ExSub_Topics_ID, Est.ExSubTopicname_1 from
Res_Grades RG
INNER JOIN Sub_Topics ST ON RG.Grade_Id= ST.Grade_ID
INNER JOIN ExSub_Topics
Est ON ST.SubTopic_ID = Est.Sub_Topics_Id
Where Gradename_1 = 'TEST'
PL/SQL procedure successfully completed.i have also executed your code sir it is executing.in my coding,i found that the part of dbms_output.put_line in my ref cursor loop is not displaying me the print.
to karthick arp
Did enable serveroutput?yes i have enabled it with buffer size 200000
to
Billy Verreynne & Frank Kulash
as per you said sir i have done and got an error my code as follows
SQL> var rc refcursor
SQL> var key varchar2(2)
SQL> var gradename varchar2(30)
SQL> exec :key :='EN';
PL/SQL procedure successfully completed.
SQL> exec :gradename :='PRE-K';
PL/SQL procedure successfully completed.
SQL> begin sel_subgroup(key => :key, gradename => :gradename,rc => :rc); end;
2 /
PL/SQL procedure successfully completed.
SQL> print rc
ERROR:
ORA-24338: statement handle not executed
SP2-0625: Error printing variable "rc"how to handle this error sir
Maybe you are looking for
-
Problem in sending online interactive form in email as PDF attachment
Hi, I am trying to send online intercative forms as PDF attachment once user fills it and click on send button. But this mail i am trying to send from SAP workflow. For this am using one function module which is accepting the pdfsource context attrib
-
Removing apps available on iCloud with multiple devices
We have kids with iPad minis using our id. All the free apps apps that they download are available for any of our devices to be downloaded. Are all these apps using iCloud storage space? And once the kids have zero interest in these apps, how do we r
-
XML SAX parser that support LexicalHandler
Hello, I'm looking for an XML SAX parser that support a LexicalHandler. I have xml files that are not well formed, ie: (&, <, >, etc...) characters within tags and I need to ignore them. Anyone have a link to some opensource library ?? Thanks, Samir
-
Errors in managed server of OCSG
hi, i am getting following error in the managed server of OCSG Thread-14 "[STUCK] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'" <alive, in native, suspended, priority=1, DAEMON> { jrockit.net.SocketNativeIO.readBytesPinned(So
-
I am using border lines in the footer of a Word document and they are not showing up when creating a PDF. Increasing the line size or reducing the resolution to 300dpi does not help. Any other suggestions?