Run time parameter

hi,
I want to insert parameter while report is running.
please help

what do you mean exactly? wouldn't it be simpler to just pass the parameter at the start of the report? what do you mean by "while report is running"?

Similar Messages

  • French characters in run time parameter values doesn't show up in emails

    We have a custom workflow with configurations to send email when a request is assigned to a person and also to send email on request rejections.
    We are encountering following issues with respect to French characters that are available in the message body and message subject.
    Issue 1:Notifications are configured in Human Task (ApprovalTask.task) when a task is assigned. Since the message body contains French characters we have used ISO-8859-1 encodings to render the message properly to the user. The message body also has some run time content from the task payload.
    For e.g. À titre de responsable fonctionnel, une demande d''approbation pour un accès informatique vous est assignée.
    Acc&#232;s informatique demand&#233; : <%/task:task/task:payload/ns1:ObjectDetails/ns1:name%>
    In this case all static text values are rendered properly to the end user in his email. However the French characters in run time parameter values doesn't show up properly and has some weird characters.
    Issue 2: Unable to change the default subject shown in the approval task emails i.e. Notifications are configured in Human Task (ApprovalTask.task) when a task is assigned. By default it shows Action Required: Approval. How can this default value be changed?
    Issue 3: We have an Email Activity in Bpel process that follows a task rejection. The emailpayload is ISO-8859-1 encoded and works for the message body. However the email subject shows up with ISO-8859-1 encodings itself and doesn't convert to proper string in the end user's email. Is there any specific setting required for french characters in subject?

    Hi Kulwinder,
    Thanks for your reply.
    In fact I do, I've follewed the "Using SAP HANA Variables with SAP BusinessObjects BI4.0" guide.
    Please note, when I use a fix value to parameter is working fine, for example:
    SELECT *
    FROM "_SYS_BIC"."prueba-concepto/CV_TEST_VAR_II" ('PLACEHOLDER' = ('$$FECHA$$','20130530'))
    But when I set prompt of the DataFoundation parameter I get and error, this is my sentence:
    SELECT *
    FROM "_SYS_BIC"."prueba-concepto/CV_TEST_VAR_II" ('PLACEHOLDER' = ('$$FECHA$$',@Prompt(FECHA)))
    To me is very curious that I can't enter a value in the DataPreview in Hana Studio, because is not requested, even when the input parameter have been set as mandatory
    Have you idea of what could be happening?

  • How to pass a run time parameter in a customized store procedure

    Hi Friend
    I have created customized Store Procedure for some logic. Presently i am executing the Store Procedure through the Data Manager Package.
    But i need to pass a run time parameter at the time of execution the data manager package. Basically i want pass the Materail Dimension Member at the time of data manager execution .
    Looking forward to your views on the same.
    thanks
    krish

    Hi Krish,
    For this, you maintain a script logic and from the script you call the stored procedure alongwith its parameters. Now build a DM on top of the script logic. While running the DM, it should ask the user to select the material members. These members will be automatically passed to the script through %MATERIAL_SET%. In your script, call the stored proc and once of the parameters should be %MATERAIL_SET%.
    Hope this helps.

  • Issue with Run time parameter values

    Hi All,
    Am facing an error while loading EBS 11.5.10 Financial data. Problem is, my parameters in the SQL Qualifier query (run time parameters in the SQL query) were not being replaced with appropriate values during run time. This is happening for the task "SDE_ORA_Reverse_GLJournals_ImportReference_Extract" that have SQL query in 'mplt_BC_ORA_XactsimpGlrfExtract' mapplet.
    Ihave checked in parameter file and it have values for those Run time parameters. For some reasons, these values were not being picked up by that SQL query.
    Can someboday help me on this about possible reason(s) behind this?

    There are 5 tasks SDE_PSFT_PayrollFact_Total, SDE_PSFT_PayrollFact_Earnings, SDE_PSFT_PayrollFact_EarningsOther, SDE_PSFT_PayrollFact_Deductions, SDE_PSFT_PayrollFact_Taxes are failing all are with same error READER_1_1_1> PR_18012 SQL Error [
    ORA-00936: missing expression Database driver error...
    I verified the mapplet in that missing expression is $$LAST_EXTRACT_DATE value.
    If you know any workaround for this issue please suggest
    I am attaching one of the error logs.
    DIRECTOR> VAR_27028 Use override value [DataWarehouse] for session parameter:[$DBConnection_OLAP].
    DIRECTOR> VAR_27028 Use override value [PSFT_9_0_HCM] for session parameter:[$DBConnection_OLTP].
    DIRECTOR> VAR_27028 Use override value [12] for mapping parameter:[$$DATASOURCE_NUM_ID].
    DIRECTOR> VAR_27027 Use default value [] for mapping parameter:[mplt_BC_PSFT_PayrollFact_Total.$$INITIAL_EXTRACT_DATE].
    DIRECTOR> VAR_27027 Use default value [] for mapping parameter:[mplt_BC_PSFT_PayrollFact_Total.$$LAST_EXTRACT_DATE].
    DIRECTOR> VAR_27028 Use override value [DEFAULT] for mapping parameter:[$$TENANT_ID].
    DIRECTOR> TM_6014 Initializing session [SDE_PSFT_PayrollFact_Total_Full] at [Wed Dec 10 13:41:44 2008]
    DIRECTOR> TM_6683 Repository Name: [Oracle_BI_DW_Base]
    DIRECTOR> TM_6684 Server Name: [Oracle_BI_DW_Base_Integration_Service]
    DIRECTOR> TM_6686 Folder: [SDE_PSFT_90_Adaptor_Test]
    DIRECTOR> TM_6685 Workflow: [SDE_PSFT_PayrollFact_Total_Full]
    DIRECTOR> TM_6101 Mapping name: SDE_PSFT_PayrollFact_Total [version 1]
    DIRECTOR> TM_6827 [C:\Informatica\PowerCenter8.1.1\server\infa_shared\Storage] will be used as storage directory for session [SDE_PSFT_PayrollFact_Total_Full].
    DIRECTOR> CMN_1805 Recovery cache will be deleted when running in normal mode.
    DIRECTOR> CMN_1802 Session recovery cache initialization is complete.
    DIRECTOR> TM_6703 Session [SDE_PSFT_PayrollFact_Total_Full] is run by 32-bit Integration Service [node01_HSCHBSCGN20031], version [8.1.1], build [0831].
    MANAGER> PETL_24058 Running Partition Group [1].
    MANAGER> PETL_24000 Parallel Pipeline Engine initializing.
    MANAGER> PETL_24001 Parallel Pipeline Engine running.
    MANAGER> PETL_24003 Initializing session run.
    MAPPING> CMN_1569 Server Mode: [ASCII]
    MAPPING> CMN_1570 Server Code page: [MS Windows Latin 1 (ANSI), superset of Latin1]
    MAPPING> TM_6151 Session Sort Order: [Binary]
    MAPPING> TM_6156 Using LOW precision decimal arithmetic
    MAPPING> TM_6180 Deadlock retry logic will not be implemented.
    MAPPING> TM_6307 DTM Error Log Disabled.
    MAPPING> TE_7022 TShmWriter: Initialized
    MAPPING> DBG_21075 Connecting to database [orcl], user [obaw]
    MAPPING> TM_6007 DTM initialized successfully for session [SDE_PSFT_PayrollFact_Total_Full]
    DIRECTOR> PETL_24033 All DTM Connection Info: [<NONE>].
    MANAGER> PETL_24004 Starting pre-session tasks. : (Wed Dec 10 13:41:45 2008)
    MANAGER> PETL_24027 Pre-session task completed successfully. : (Wed Dec 10 13:41:46 2008)
    DIRECTOR> PETL_24006 Starting data movement.
    MAPPING> TM_6660 Total Buffer Pool size is 32000000 bytes and Block size is 1280000 bytes.
    READER_1_1_1> DBG_21438 Reader: Source is [HR90DEV], user [sysadm]
    READER_1_1_1> DBG_21438 Reader: Source is [HR90DEV], user [sysadm]
    READER_1_1_1> BLKR_16003 Initialization completed successfully.
    WRITER_1_*_1> WRT_8147 Writer: Target is database [orcl], user [obaw], bulk mode [OFF]
    WRITER_1_*_1> WRT_8124 Target Table W_PSFT_PAYROLL_F_TMP :SQL INSERT statement:
    INSERT INTO W_PSFT_PAYROLL_F_TMP(EMPLID,EMPL_RCD,PAYGROUP,PAY_PERIOD_START_DT,PAY_PERIOD_END_DT,CHECK_DT,OFF_CYCLE,PAGE_NUM,LINE_NUM,SEPCHK,COMPANY,DEPTID,LOCATION_CD,PLAN_TYPE,BENEFIT_PLAN,BENEFIT_RCD_NBR,DEDCD,DED_CLASS,DED_SLSTX_CLASS,ADDL_NBR,PAY_EARN_START_DT,PAY_EARN_END_DT,ERNCD,COUNTRY,STATE,LOCALITY,TAX_CLASS,PAYROLL_TYPE,PAY_DETAIL_FLG,PAYROLL_AMOUNT,CHANGED_ON_DT,DATASOURCE_NUM_ID,INTEGRATION_ID,TENANT_ID,X_CUSTOM) VALUES ( ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)
    WRITER_1_*_1> WRT_8270 Target connection group #1 consists of target(s) [W_PSFT_PAYROLL_F_TMP]
    WRITER_1_*_1> WRT_8003 Writer initialization complete.
    READER_1_1_1> BLKR_16007 Reader run started.
    READER_1_1_1> PR_18039 Application Source Qualifier [mplt_BC_PSFT_PayrollFact_Total.Sq_Payroll_Total] is reading from PeopleSoft.
    WRITER_1_*_1> WRT_8005 Writer run started.
    WRITER_1_*_1> WRT_8158
    *****START LOAD SESSION*****
    Load Start Time: Wed Dec 10 13:41:46 2008
    Target tables:
    W_PSFT_PAYROLL_F_TMP
    READER_1_1_1> PR_18008 Application SQ instance [mplt_BC_PSFT_PayrollFact_Total.Sq_Payroll_Total] User SQL Query [SELECT 
    PS_PAY_CHECK.COMPANY , 
    PS_PAY_CHECK.PAYGROUP , 
    PS_PAY_CHECK.PAY_END_DT , 
    PS_PAY_CHECK.OFF_CYCLE , 
    PS_PAY_CHECK.PAGE_NUM , 
    PS_PAY_CHECK.LINE_NUM , 
    PS_PAY_CHECK.SEPCHK , 
    PS_PAY_CHECK.EMPLID , 
    PS_PAY_CHECK.EMPL_RCD , 
    PS_PAY_CHECK.DEPTID , 
    'TOTAL_GROSS' SUMMARY_TYPE,
    PS_PAY_CHECK.TOTAL_GROSS SUMMARY_AMOUNT, 
    PS_PAY_CHECK.CHECK_DT , 
    PS_PAY_CHECK.LOCATION , 
    PS_PAY_CHECK.UPDATE_DT 
    FROM 
    PS_PAY_CHECK 
    WHERE
    PS_PAY_CHECK.PAYCHECK_STATUS IN ('A','F','R') AND 
    PS_PAY_CHECK.PAY_END_DT >= 
    UNION ALL
    SELECT 
    PS_PAY_CHECK.COMPANY , 
    PS_PAY_CHECK.PAYGROUP , 
    PS_PAY_CHECK.PAY_END_DT , 
    PS_PAY_CHECK.OFF_CYCLE , 
    PS_PAY_CHECK.PAGE_NUM , 
    PS_PAY_CHECK.LINE_NUM , 
    PS_PAY_CHECK.SEPCHK , 
    PS_PAY_CHECK.EMPLID , 
    PS_PAY_CHECK.EMPL_RCD , 
    PS_PAY_CHECK.DEPTID , 
    'TOTAL_TAXES' SUMMARY_TYPE,
    PS_PAY_CHECK.TOTAL_TAXES SUMMARY_AMOUNT, 
    PS_PAY_CHECK.CHECK_DT , 
    PS_PAY_CHECK.LOCATION , 
    PS_PAY_CHECK.UPDATE_DT 
    FROM 
    PS_PAY_CHECK 
    WHERE
    PS_PAY_CHECK.PAYCHECK_STATUS IN ('A','F','R') AND 
    PS_PAY_CHECK.PAY_END_DT >= 
    UNION ALL
    SELECT 
    PS_PAY_CHECK.COMPANY , 
    PS_PAY_CHECK.PAYGROUP , 
    PS_PAY_CHECK.PAY_END_DT , 
    PS_PAY_CHECK.OFF_CYCLE , 
    PS_PAY_CHECK.PAGE_NUM , 
    PS_PAY_CHECK.LINE_NUM , 
    PS_PAY_CHECK.SEPCHK , 
    PS_PAY_CHECK.EMPLID , 
    PS_PAY_CHECK.EMPL_RCD , 
    PS_PAY_CHECK.DEPTID , 
    'TOTAL_DEDUCTIONS' SUMMARY_TYPE,
    PS_PAY_CHECK.TOTAL_DEDUCTIONS SUMMARY_AMOUNT, 
    PS_PAY_CHECK.CHECK_DT , 
    PS_PAY_CHECK.LOCATION , 
    PS_PAY_CHECK.UPDATE_DT 
    FROM 
    PS_PAY_CHECK 
    WHERE
    PS_PAY_CHECK.PAYCHECK_STATUS IN ('A','F','R') AND 
    PS_PAY_CHECK.PAY_END_DT >= 
    UNION ALL
    SELECT 
    PS_PAY_CHECK.COMPANY , 
    PS_PAY_CHECK.PAYGROUP , 
    PS_PAY_CHECK.PAY_END_DT , 
    PS_PAY_CHECK.OFF_CYCLE , 
    PS_PAY_CHECK.PAGE_NUM , 
    PS_PAY_CHECK.LINE_NUM , 
    PS_PAY_CHECK.SEPCHK , 
    PS_PAY_CHECK.EMPLID , 
    PS_PAY_CHECK.EMPL_RCD , 
    PS_PAY_CHECK.DEPTID , 
    'NET_PAY' SUMMARY_TYPE,
    PS_PAY_CHECK.NET_PAY SUMMARY_AMOUNT, 
    PS_PAY_CHECK.CHECK_DT , 
    PS_PAY_CHECK.LOCATION , 
    PS_PAY_CHECK.UPDATE_DT 
    FROM 
    PS_PAY_CHECK 
    WHERE
    PS_PAY_CHECK.PAYCHECK_STATUS IN ('A','F','R') AND 
    PS_PAY_CHECK.PAY_END_DT >= ]
    READER_1_1_1> CMN_1761 Timestamp Event: [Wed Dec 10 13:41:46 2008]
    READER_1_1_1> PR_18012 SQL Error [
    ORA-00936: missing expression
    Database driver error...
    Function Name : Execute
    SQL Stmt : SELECT
    PS_PAY_CHECK.COMPANY ,
    PS_PAY_CHECK.PAYGROUP ,
    PS_PAY_CHECK.PAY_END_DT ,
    PS_PAY_CHECK.OFF_CYCLE ,
    PS_PAY_CHECK.PAGE_NUM ,
    PS_PAY_CHECK.LINE_NUM ,
    PS_PAY_CHECK.SEPCHK ,
    PS_PAY_CHECK.EMPLID ,
    PS_PAY_CHECK.EMPL_RCD ,
    PS_PAY_CHECK.DEPTID ,
    'TOTAL_GROSS' SUMMARY_TYPE,
    PS_PAY_CHECK.TOTAL_GROSS SUMMARY_AMOUNT,
    PS_PAY_CHECK.CHECK_DT ,
    PS_PAY_CHECK.LOCATION ,
    PS_PAY_CHECK.UPDATE_DT
    FROM
    PS_PAY_CHECK
    WHERE
    PS_PAY_CHECK.PAYCHECK_STATUS IN ('A','F','R') AND
    PS_PAY_CHECK.PAY_END_DT >=
    UNION ALL
    SELECT
    PS_PAY_CHECK.COMPANY ,
    PS_PAY_CHECK.PAYGROUP ,
    PS_PAY_CHECK.PAY_END_DT ,
    PS_PAY_CHECK.OFF_CYCLE ,
    PS_PAY_CHECK.PAGE_NUM ,
    PS_PAY_CHECK.LINE_NUM ,
    PS_PAY_CHECK.SEPCHK ,
    PS_PAY_CHECK.EMPLID ,
    PS_PAY_CHECK.EMPL_RCD ,
    PS_PAY_CHECK.DEPTID ,
    'TOTAL_TAXES' SUMMARY_TYPE,
    PS_PAY_CHECK.TOTAL_TAXES SUMMARY_AMOUNT,
    PS_PAY_CHECK.CHECK_DT ,
    PS_PAY_CHECK.LOCATION ,
    PS_PAY_CHECK.UPDATE_DT
    FROM
    PS_PAY_CHECK
    WHERE
    PS_PAY_CHECK.PAYCHECK_STATUS IN ('A','F','R') AND
    PS_PAY_CHECK.PAY_END_DT >=
    UNION ALL
    SELECT
    PS_PAY_CHECK.COMPANY ,
    PS_PAY_CHECK.PAYGROUP ,
    PS_PAY_CHECK.PAY_END_DT ,
    PS_PAY_CHECK.OFF_CYCLE ,
    PS_PAY_CHECK.PAGE_NUM ,
    PS_PAY_CHECK.LINE_NUM ,
    PS_PAY_CHECK.SEPCHK ,
    PS_PAY_CHECK.EMPLID ,
    PS_PAY_CHECK.EMPL_RCD ,
    PS_PAY_CHECK.DEPTID ,
    'TOTAL_DEDUCTIONS' SUMMARY_TYPE,
    PS_PAY_CHECK.TOTAL_DEDUCTIONS SUMMARY_AMOUNT,
    PS_PAY_CHECK.CHECK_DT ,
    PS_PAY_CHECK.LOCATION ,
    PS_PAY_CHECK.UPDATE_DT
    FROM
    PS_PAY_CHECK
    WHERE
    PS_PAY_CHECK.PAYCHECK_STATUS IN ('A','F','R') AND
    PS_PAY_CHECK.PAY_END_DT >=
    UNION ALL
    SELECT
    PS_PAY_CHECK.COMPANY ,
    PS_PAY_CHECK.PAYGROUP ,
    PS_PAY_CHECK.PAY_END_DT ,
    PS_PAY_CHECK.OFF_CYCLE ,
    PS_PAY_CHECK.PAGE_NUM ,
    PS_PAY_CHECK.LINE_NUM ,
    PS_PAY_CHECK.SEPCHK ,
    PS_PAY_CHECK.EMPLID ,
    PS_PAY_CHECK.EMPL_RCD ,
    PS_PAY_CHECK.DEPTID ,
    'NET_PAY' SUMMARY_TYPE,
    PS_PAY_CHECK.NET_PAY SUMMARY_AMOUNT,
    PS_PAY_CHECK.CHECK_DT ,
    PS_PAY_CHECK.LOCATION ,
    PS_PAY_CHECK.UPDATE_DT
    FROM
    PS_PAY_CHECK
    WHERE
    PS_PAY_CHECK.PAYCHECK_STATUS IN ('A','F','R') AND
    PS_PAY_CHECK.PAY_END_DT >=
    Oracle Fatal Error
    Database driver error...
    Function Name : Execute
    SQL Stmt : SELECT
    PS_PAY_CHECK.COMPANY ,
    PS_PAY_CHECK.PAYGROUP ,
    PS_PAY_CHECK.PAY_END_DT ,
    PS_PAY_CHECK.OFF_CYCLE ,
    PS_PAY_CHECK.PAGE_NUM ,
    PS_PAY_CHECK.LINE_NUM ,
    PS_PAY_CHECK.SEPCHK ,
    PS_PAY_CHECK.EMPLID ,
    PS_PAY_CHECK.EMPL_RCD ,
    PS_PAY_CHECK.DEPTID ,
    'TOTAL_GROSS' SUMMARY_TYPE,
    PS_PAY_CHECK.TOTAL_GROSS SUMMARY_AMOUNT,
    PS_PAY_CHECK.CHECK_DT ,
    PS_PAY_CHECK.LOCATION ,
    PS_PAY_CHECK.UPDATE_DT
    FROM
    PS_PAY_CHECK
    WHERE
    PS_PAY_CHECK.PAYCHECK_STATUS IN ('A','F','R') AND
    PS_PAY_CHECK.PAY_END_DT >=
    UNION ALL
    SELECT
    PS_PAY_CHECK.COMPANY ,
    PS_PAY_CHECK.PAYGROUP ,
    PS_PAY_CHECK.PAY_END_DT ,
    PS_PAY_CHECK.OFF_CYCLE ,
    PS_PAY_CHECK.PAGE_NUM ,
    PS_PAY_CHECK.LINE_NUM ,
    PS_PAY_CHECK.SEPCHK ,
    PS_PAY_CHECK.EMPLID ,
    PS_PAY_CHECK.EMPL_RCD ,
    PS_PAY_CHECK.DEPTID ,
    'TOTAL_TAXES' SUMMARY_TYPE,
    PS_PAY_CHECK.TOTAL_TAXES SUMMARY_AMOUNT,
    PS_PAY_CHECK.CHECK_DT ,
    PS_PAY_CHECK.LOCATION ,
    PS_PAY_CHECK.UPDATE_DT
    FROM
    PS_PAY_CHECK
    WHERE
    PS_PAY_CHECK.PAYCHECK_STATUS IN ('A','F','R') AND
    PS_PAY_CHECK.PAY_END_DT >=
    UNION ALL
    SELECT
    PS_PAY_CHECK.COMPANY ,
    PS_PAY_CHECK.PAYGROUP ,
    PS_PAY_CHECK.PAY_END_DT ,
    PS_PAY_CHECK.OFF_CYCLE ,
    PS_PAY_CHECK.PAGE_NUM ,
    PS_PAY_CHECK.LINE_NUM ,
    PS_PAY_CHECK.SEPCHK ,
    PS_PAY_CHECK.EMPLID ,
    PS_PAY_CHECK.EMPL_RCD ,
    PS_PAY_CHECK.DEPTID ,
    'TOTAL_DEDUCTIONS' SUMMARY_TYPE,
    PS_PAY_CHECK.TOTAL_DEDUCTIONS SUMMARY_AMOUNT,
    PS_PAY_CHECK.CHECK_DT ,
    PS_PAY_CHECK.LOCATION ,
    PS_PAY_CHECK.UPDATE_DT
    FROM
    PS_PAY_CHECK
    WHERE
    PS_PAY_CHECK.PAYCHECK_STATUS IN ('A','F','R') AND
    PS_PAY_CHECK.PAY_END_DT >=
    UNION ALL
    SELECT
    PS_PAY_CHECK.COMPANY ,
    PS_PAY_CHECK.PAYGROUP ,
    PS_PAY_CHECK.PAY_END_DT ,
    PS_PAY_CHECK.OFF_CYCLE ,
    PS_PAY_CHECK.PAGE_NUM ,
    PS_PAY_CHECK.LINE_NUM ,
    PS_PAY_CHECK.SEPCHK ,
    PS_PAY_CHECK.EMPLID ,
    PS_PAY_CHECK.EMPL_RCD ,
    PS_PAY_CHECK.DEPTID ,
    'NET_PAY' SUMMARY_TYPE,
    PS_PAY_CHECK.NET_PAY SUMMARY_AMOUNT,
    PS_PAY_CHECK.CHECK_DT ,
    PS_PAY_CHECK.LOCATION ,
    PS_PAY_CHECK.UPDATE_DT
    FROM
    PS_PAY_CHECK
    WHERE
    PS_PAY_CHECK.PAYCHECK_STATUS IN ('A','F','R') AND
    PS_PAY_CHECK.PAY_END_DT >=
    Oracle Fatal Error]
    READER_1_1_1> CMN_1761 Timestamp Event: [Wed Dec 10 13:41:46 2008]
    READER_1_1_1> BLKR_16004 ERROR: Prepare failed.
    WRITER_1_*_1> WRT_8333 Rolling back all the targets due to fatal session error.
    WRITER_1_*_1> WRT_8325 Final rollback executed for the target [W_PSFT_PAYROLL_F_TMP] at end of load
    WRITER_1_*_1> WRT_8035 Load complete time: Wed Dec 10 13:41:46 2008
    LOAD SUMMARY
    ============
    WRT_8036 Target: W_PSFT_PAYROLL_F_TMP (Instance Name: [W_PSFT_PAYROLL_F_TMP])
    WRT_8044 No data loaded for this target
    WRITER_1__1> WRT_8043 ****END LOAD SESSION*****
    MANAGER> PETL_24031
    ***** RUN INFO FOR TGT LOAD ORDER GROUP [1], CONCURRENT SET [1] *****
    Thread [READER_1_1_1] created for [the read stage] of partition point [mplt_BC_PSFT_PayrollFact_Total.Sq_Payroll_Total] has completed. The total run time was insufficient for any meaningful statistics.
    Thread [TRANSF_1_1_1] created for [the transformation stage] of partition point [mplt_BC_PSFT_PayrollFact_Total.Sq_Payroll_Total] has completed. The total run time was insufficient for any meaningful statistics.
    Thread [WRITER_1_*_1] created for [the write stage] of partition point [W_PSFT_PAYROLL_F_TMP] has completed. The total run time was insufficient for any meaningful statistics.
    MANAGER> PETL_24005 Starting post-session tasks. : (Wed Dec 10 13:41:47 2008)
    MANAGER> PETL_24029 Post-session task completed successfully. : (Wed Dec 10 13:41:47 2008)
    MAPPING> TM_6018 Session [SDE_PSFT_PayrollFact_Total_Full] run completed with [0] row transformation errors.
    MANAGER> PETL_24002 Parallel Pipeline Engine finished.
    DIRECTOR> PETL_24013 Session run completed with failure.
    DIRECTOR> TM_6022
    SESSION LOAD SUMMARY
    ================================================
    DIRECTOR> TM_6252 Source Load Summary.
    DIRECTOR> CMN_1740 Table: [Sq_Payroll_Total] (Instance Name: [mplt_BC_PSFT_PayrollFact_Total.Sq_Payroll_Total])
         Output Rows [0], Affected Rows [0], Applied Rows [0], Rejected Rows [0]
    DIRECTOR> TM_6253 Target Load Summary.
    DIRECTOR> CMN_1740 Table: [W_PSFT_PAYROLL_F_TMP] (Instance Name: [W_PSFT_PAYROLL_F_TMP])
         Output Rows [0], Affected Rows [0], Applied Rows [0], Rejected Rows [0]
    DIRECTOR> TM_6023
    ===================================================
    DIRECTOR> TM_6020 Session [SDE_PSFT_PayrollFact_Total_Full] completed at [Wed Dec 10 13:41:48 2008]

  • Setting Run-time parameters for EJB objects

    Hello,
    I need to set a run-time paramater that will be used by the session beans in my
    application. I looked thru the documentation, but I'm not finding an obvious
    way to do this.
    In weblogic-application.xml, there is an <application-parameter> element that
    seems promising, but I can't find a weblogic method for getting the value of this
    element from within an EJB.
    Any ideas on the best way to do this?
    Thank you

    Ellen,
    There is no global <env-entry> that you can use currently, but you can make
    an
    <env-entry> in the EJB module's descriptors for each session bean that needs
    the run-time parameter.
    the <application-parameter> element you speak of is not a place that
    arbitrary
    values can be placed and obtained. That element is used to by the server
    and there are a specific set of values that are recognized
    as override options for the server to use for the application.
    Michael Kovacs
    Senior Software Engineer
    BEA Systems
    "Ellen Kraffmiller" <[email protected]> wrote in message
    news:3f857657$[email protected]..
    >
    Hello,
    I need to set a run-time paramater that will be used by the session beansin my
    application. I looked thru the documentation, but I'm not finding anobvious
    way to do this.
    In weblogic-application.xml, there is an <application-parameter> elementthat
    seems promising, but I can't find a weblogic method for getting the valueof this
    element from within an EJB.
    Any ideas on the best way to do this?
    Thank you

  • Item / Block run time property

    Dear all,
    I required following run time parameter property value.
    1. Distance between record property for item.
    2. Current canvas type property. It is TAB CANVAS / STACK CANVAS etc.
    Pl. give me thro' which function, i can get this value.
    Thanks
    hiren

    well  i deleted the cache but of no use,
    i think its not cuzz of authorizations
    i'm still looking for confirmation
    need help out here, when the wad opens
    i dont see any web item just a folder standard items
    which doesnt open though
    Message was edited by:
            Vj.R T

  • Passing query parameter through xcelsius 2011 at run time

    I am using reporting service as a web connectivity and I am trying to pass the query parameter at run time from the dashboard. While executing the xcelsius at first time it is working well with the default value but after passing the parameter from combo box, the data is not loading. It is not returning anything except the field name.
    I am new to this xcelsius. Your help will be really appreciated.
    Thanks.

    Hi,
    if you do the following thing,i think it may be helpfull,
    First select Data in menubar>Connection->select required connection>select the useage option in connection definition window>give  trigger cell value as combo box destination cell.
    Thanks,
    Ramana

  • Displaying different sheets at run time based on value of the parameter

    Hi,
    I've a query regarding displaying two different sheets at run time in Oracle discoverer based on the value of the parameter that i give.
    I've a parameter Summary_flag.
    If the value of the parameter is 'Y',then it should display a sheet,say for example it should display Sheet1.
    If the value is 'N',then it should display another sheet, say for example it should display Sheet2.
    Is there any way in which i can accomplish this?
    I went through the Format and Tools menus but couldnt find anything regarding this aspect.
    Can you help me out?
    Thanks,

    Having a Disco parameter dictate which worksheet is displayed is not an option that is available. There are a few workarounds, though:
    1. Have a portlet (or some other web interface) accept your parameters, and then call the appropriate worksheet.
    2. Have 2 worksheets, and have it devolve into a training issue (for a summary run this, for all the details run this).
    3. Create calculations that will show or hide column data depending on the parameter selected - the columns will still be there, and you can fill them in with blanks, or a message like "N/A for Summary".
    4. Create a report that will allow the users to drill between the summary and detail data - I'm not sure whether you could use a parameter to then say whether the report should open up summarized or expanded.

  • Report is taking too much time when running from parameter form

    Dear All
    I have developed report in oracle reports bulider 10g. while running it from report builder data is coming very fast.
    But, If it is running from parameter form it is taking too much time to format report in PDF.
    Please suggest any configuration or setting if anybody is having Idea.
    Thanks

    Hi,
    The first thing to check is whether the query is running to completion in TOAD. By default, TOAD just selects the first 50 rows, where as Discoverer must return all the rows before displaying results if a crosstab report is used.
    Secondly, check that the queries and the explain plans are the same in Discoverer and Toad. Although, Discoverer shows the SQL in the SQL inspector this isn't necessarily the SQL actually sent to the database. Use TOAD to interogate the Discoverer session to determine the actual SQL and compare this SQL and explain plan to SQL you ran in TOAD.
    Thirdly, check that the session context is the same in both cases. So check that any custom contexts and the USER_ENV context is the same, and if any security packages or VPD policies are used in the SQL that these have been initialised the same.
    If you still cannot determine the difference then trace both sessions.
    Rod West

  • Exporting DI batch to BAT and set DI parameter/variable at run time

    Hi All,
    We are looking to call DI batch job externally and pass parameter/variable at run time.
    We tried exporting DI batch to a bat file and setting substitution parameters during export.
    In the exported .bat file, it references a .txt file which shows the name of the substitution paramemters but the value of the parameters are encrypted.
    Does anyone know how to pass parameter/variable to a DI batch job at run time externally?
    Thanks,
    Bobby

    I tried out this method and I have some additional issues.
    1. if we use the BOE scheduler the text parameter file is using a specific naming convention that is not clearly documented. it is like : -GV"$VAR=ENCRYPTEDVALUE;"... trying to modify it with a clear value like -GV"$VAR=MYVALUE;" was simply ignored by the scheduler... seems also that BOE did not sent any scheduling request to the DI Job Launcher...
    What is the proper convention please?
    2.Is there a better way to enter this parameter than editing the TXT file. Most of the BOE InfoView users are not allowed to modify or store documents.. This is not very convenient if they cannot enter simply the parameter values in a let say more confortable way...
    Thank you and cheers

  • How Could I Pass Parameter at run time in form 10g???

    I want to pass parameter value with run time,
    Example:
    When my form run I want to see only the employees of department 10,
    & want to pass value 10 when my form run.
    http://machine:port/forms90/f90servlet?form=c:\applications\doc_flow\doc_sign&userid=test/test@fil10g...........?
    Najeeb

    Although your example will work, it is not recommended to use blank spaced in a URL if it can be avoided. The preferred way of passing custom params would be to use the otherparams parameter. For example:
    http://server/forms/frmservlet?form=helloworld&otherparams=param1=val1
    If there are more than one parameter/value pair to pass, separate using a plus (+) sign. For example:
    http://server/forms/frmservlet?form=helloworld&otherparams=param1=val1+param2=val2

  • How to Hide the Parameter field at run time....

    Hi,
    I have a parameter field which behaves differently depending on the User logged in.
    It has the LOV coming from following SQL.
    SELECT customer_name FROM Cust_mast;
    If the user = 'INTERNAL' then the Where clause will be
    WHERE cust_id in('DELL', 'SBC', 'BANK')
    Else there will be no WHERE clause or the parameter field
    should be hidden in the parameter form.
    So my questions are:
    1) How to hide the Parameter field during Run time?
    OR OR OR
    2) How to change the LOV select statement during Run time?
    Thanks.
    Ram.

    Hi Ram,
    Is there any way to play with the sql query SELECT using DECODE ?I'm not sure of this part, maybe someone else can suggest a way.
    However, what you want can be done in 2 other ways:
    1. Build 2 reports. Both reports will just be duplicates of each other, only difference being that the 'LoV where clause' will be different. Now you can fire the appropriate report in many ways. For example, if the customer is alreay logged inside your custom application, and therefore you already know whether the user is internal of external, you can design your button or link which launches the report to contain logic such that one of the 2 reports is fired depending on who the user is.
    1. Use a JSP parameter form, not a paper parameter form In this case, just build an HTML parameter form in the web source of your report. Use Java logic to populate the LoV drop-down list. When you have to launch the final report, just launch the paper-layout of the report. For example (you will have to modify this):
    <form action="http://machine:port/reports/rwservlet?report=ParamForm.jsp+..." name="First" method="post">
    <select name="selected_customer" onChange="First.submit()" >
    <option value="">Choose a Customer Name
    <rw:foreach id="G_cust_id" src="G_cust_id">
         <rw:getValue id="myCustId" src="CUSTOMER_ID"/>
    <rw:getValue id="myCustName" src="CUSTOMER_NAME"/>
    <option value="<%=myCustId%>"><%=myCustName%>
    </rw:foreach>
    </select>
    </form>
    In the code above, you will have to make sure that your report's data model defines 2 CUSTOMER_ID's (like CUSTOMER_ID_INT and CUSTOMER_ID_EXT). These 2 will be internal and external Cust ID's. Use Java logic to show one of them.
    Navneet.

  • How to hide the Parameter field during Run time?

    Hi,
    How to hide the Parameter field during Run time?
    I have a parameter field which behaves differently depending on the User logged in.
    I am using reports 10G
    For ex: I have 3 field created in JSP
    CUSTOMER
    PROVIDER
    FROM DATE
    END DATE
    If the user = 'SUPER show all the parameter
    CUSTOMER
    PROVIDER
    FROM DATE
    END DATE
    If the user is 'GATEKEEPER" Just show
    PROVIDER
    FROM DATE
    END DATE
    Can I do that?
    Please help
    Thanks.
    KK

    hi, i'm not familiar much with JSP. but i think workaround is to create two window one which have 4 fields and the other which have 3. if user is SUPER then call the first screen otherwise if user is GATEKEEPER then call the second screen.

  • How to pass a run time value as a parameter to a webdynpro iview

    Hi,
    we have a webdynpro which we can call with passing a run time value in this form:
    https://xxx.yyy.zzz/sap/bc/webdynpro/sap/zfkq_inv_1?WI_ID=000000004332&sap-client=700&sap-language=EN&sap-wd-sapgui=X
    This link will be sent to many users but the WI_ID will change every time.
    It works fine but now we want to implement this webdynpro in our portal. The user shall get a link like this
    https://xxx.yyy.zzz/irj/portal/webdynpro-test?wi_id=000000004332. With this link he will navigate directly to the webdnypro (quicklink-function).
    The problem is that i don't know how to transfer the parameter WI_ID in the url to the webdynpro.
    It's no problem to fix the WI_ID in the application parameter properties but this is not what we want.
    Is it possible to transfer the url parameter to the application parameters of the webdynpro iview ?
    Thanks in advance.
    Best Regards
    Mirko Berscheidt

    Hi Mirko,
    The first thought I had is if your scenario makes sense at all. Because you might send out the links, but probably the iView will also be accessible via navigation, and in that case this additional parameter won't be there!?! (And if the iView is not accessible by navigation, then why going the way via the portal and not the direct way to the application like with your first link given?!).
    Anyhow, I think this should be possible by using the AppIntegrator, see The customer exit of the Application Integrator
    For an example about how to add individual values to users which you then can add to the URL see this discussion: App Integrator, and custom URL parameters using Customer Exits - this might be a possibility that each user can call the "same" iView but in fact the app integrator then would be fired with different URL parameters (per user).
    Hope it helps
    Detlev

  • How To... Change the Data Type for a SELECT-OPTIONS at run time.

    Hello,
    I am trying to restrict the values available for entry into a SELECT-OPTIONS at run time depending on user input.
    The logic is as follows. The user has two input fields. A PARAMETER field which has the type RSDIOBJNM and allows them to choose an InfoObject. And the user has a SELECT-OPTIONS field to allow them to select the Characteristic values for that InfoObject.
    I would like the following example to be possible:
    The user enters 0MATERIAL into the PARAMETER. When the user clicks on the SELECT-OPTIONS control code will derive a list of possible options the user can enter in the SELECT-OPTIONS. In this case only values found in the master data or at least no values greater than 18 characters.
    I have looked at the following function module SELECT_OPTIONS_RESTRICT and this do not appear to be helpful as they only restrict on the signs allowed for the values (unless I misunderstand, it is a complex function module!).
    The code I have so far is (thus the user enters a InfoObject into p_char1 and the select options so_char1 should only accept active values of that InfoObject):
    declaration of variables for user interface
      DATA c_char(32) TYPE c.
    declaration of count variable
      DATA i_count TYPE i.
    declaration of user interface
      SELECTION-SCREEN BEGIN OF BLOCK a1 WITH FRAME TITLE text-001.
        PARAMETERS: p_ipack TYPE RSLOGDPID.
      SELECTION-SCREEN END OF BLOCK a1.
      SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-002.
        PARAMETERS: p_char1 TYPE RSDIOBJNM.
        SELECT-OPTIONS: so_char1  for c_char NO INTERVALS.
        PARAMETERS: p_char2 TYPE RSDIOBJNM.
        SELECT-OPTIONS: so_char2  for c_char NO INTERVALS.
        PARAMETERS: p_char3 TYPE RSDIOBJNM.
        SELECT-OPTIONS: so_char3  for c_char NO INTERVALS.
      SELECTION-SCREEN END OF BLOCK b1.
    Is what I am trying to do possible???
    Thanks for any help. Ross.

    You really want to restrict possible values of a select-option based on another field, not change the length of type of the select-option field, right?
    Here is what you do:  Code a custom F4 value help for the select-option at event AT SELECTION-SCREEN ON VALUE REQUEST FOR..  The first thing you do here is read the value of the parameter field (p_ipack in your example).  You can use function module DYNP_VALUES_READ.  Based on this value, you can propose values for the select-option fields.  Note that the use can still enter whatever s(he) wishes in to the select-option field without pressing F4. In this case, you will have to code some input validations taking into account the value in the p_ipack field.

Maybe you are looking for