French characters in run time parameter values doesn't show up in emails

We have a custom workflow with configurations to send email when a request is assigned to a person and also to send email on request rejections.
We are encountering following issues with respect to French characters that are available in the message body and message subject.
Issue 1:Notifications are configured in Human Task (ApprovalTask.task) when a task is assigned. Since the message body contains French characters we have used ISO-8859-1 encodings to render the message properly to the user. The message body also has some run time content from the task payload.
For e.g. À titre de responsable fonctionnel, une demande d''approbation pour un accès informatique vous est assignée.
Accès informatique demandé : <%/task:task/task:payload/ns1:ObjectDetails/ns1:name%>
In this case all static text values are rendered properly to the end user in his email. However the French characters in run time parameter values doesn't show up properly and has some weird characters.
Issue 2: Unable to change the default subject shown in the approval task emails i.e. Notifications are configured in Human Task (ApprovalTask.task) when a task is assigned. By default it shows Action Required: Approval. How can this default value be changed?
Issue 3: We have an Email Activity in Bpel process that follows a task rejection. The emailpayload is ISO-8859-1 encoded and works for the message body. However the email subject shows up with ISO-8859-1 encodings itself and doesn't convert to proper string in the end user's email. Is there any specific setting required for french characters in subject?

Hi Kulwinder,
Thanks for your reply.
In fact I do, I've follewed the "Using SAP HANA Variables with SAP BusinessObjects BI4.0" guide.
Please note, when I use a fix value to parameter is working fine, for example:
SELECT *
FROM "_SYS_BIC"."prueba-concepto/CV_TEST_VAR_II" ('PLACEHOLDER' = ('$$FECHA$$','20130530'))
But when I set prompt of the DataFoundation parameter I get and error, this is my sentence:
SELECT *
FROM "_SYS_BIC"."prueba-concepto/CV_TEST_VAR_II" ('PLACEHOLDER' = ('$$FECHA$$',@Prompt(FECHA)))
To me is very curious that I can't enter a value in the DataPreview in Hana Studio, because is not requested, even when the input parameter have been set as mandatory
Have you idea of what could be happening?

Similar Messages

Issue with Run time parameter values

Hi All,
Am facing an error while loading EBS 11.5.10 Financial data. Problem is, my parameters in the SQL Qualifier query (run time parameters in the SQL query) were not being replaced with appropriate values during run time. This is happening for the task "SDE_ORA_Reverse_GLJournals_ImportReference_Extract" that have SQL query in 'mplt_BC_ORA_XactsimpGlrfExtract' mapplet.
Ihave checked in parameter file and it have values for those Run time parameters. For some reasons, these values were not being picked up by that SQL query.
Can someboday help me on this about possible reason(s) behind this?

There are 5 tasks SDE_PSFT_PayrollFact_Total, SDE_PSFT_PayrollFact_Earnings, SDE_PSFT_PayrollFact_EarningsOther, SDE_PSFT_PayrollFact_Deductions, SDE_PSFT_PayrollFact_Taxes are failing all are with same error READER_1_1_1> PR_18012 SQL Error [
ORA-00936: missing expression Database driver error...
I verified the mapplet in that missing expression is $$LAST_EXTRACT_DATE value.
If you know any workaround for this issue please suggest
I am attaching one of the error logs.
DIRECTOR> VAR_27028 Use override value [DataWarehouse] for session parameter:[$DBConnection_OLAP].
DIRECTOR> VAR_27028 Use override value [PSFT_9_0_HCM] for session parameter:[$DBConnection_OLTP].
DIRECTOR> VAR_27028 Use override value [12] for mapping parameter:[$$DATASOURCE_NUM_ID].
DIRECTOR> VAR_27027 Use default value [] for mapping parameter:[mplt_BC_PSFT_PayrollFact_Total.$$INITIAL_EXTRACT_DATE].
DIRECTOR> VAR_27027 Use default value [] for mapping parameter:[mplt_BC_PSFT_PayrollFact_Total.$$LAST_EXTRACT_DATE].
DIRECTOR> VAR_27028 Use override value [DEFAULT] for mapping parameter:[$$TENANT_ID].
DIRECTOR> TM_6014 Initializing session [SDE_PSFT_PayrollFact_Total_Full] at [Wed Dec 10 13:41:44 2008]
DIRECTOR> TM_6683 Repository Name: [Oracle_BI_DW_Base]
DIRECTOR> TM_6684 Server Name: [Oracle_BI_DW_Base_Integration_Service]
DIRECTOR> TM_6686 Folder: [SDE_PSFT_90_Adaptor_Test]
DIRECTOR> TM_6685 Workflow: [SDE_PSFT_PayrollFact_Total_Full]
DIRECTOR> TM_6101 Mapping name: SDE_PSFT_PayrollFact_Total [version 1]
DIRECTOR> TM_6827 [C:\Informatica\PowerCenter8.1.1\server\infa_shared\Storage] will be used as storage directory for session [SDE_PSFT_PayrollFact_Total_Full].
DIRECTOR> CMN_1805 Recovery cache will be deleted when running in normal mode.
DIRECTOR> CMN_1802 Session recovery cache initialization is complete.
DIRECTOR> TM_6703 Session [SDE_PSFT_PayrollFact_Total_Full] is run by 32-bit Integration Service [node01_HSCHBSCGN20031], version [8.1.1], build [0831].
MANAGER> PETL_24058 Running Partition Group [1].
MANAGER> PETL_24000 Parallel Pipeline Engine initializing.
MANAGER> PETL_24001 Parallel Pipeline Engine running.
MANAGER> PETL_24003 Initializing session run.
MAPPING> CMN_1569 Server Mode: [ASCII]
MAPPING> CMN_1570 Server Code page: [MS Windows Latin 1 (ANSI), superset of Latin1]
MAPPING> TM_6151 Session Sort Order: [Binary]
MAPPING> TM_6156 Using LOW precision decimal arithmetic
MAPPING> TM_6180 Deadlock retry logic will not be implemented.
MAPPING> TM_6307 DTM Error Log Disabled.
MAPPING> TE_7022 TShmWriter: Initialized
MAPPING> DBG_21075 Connecting to database [orcl], user [obaw]
MAPPING> TM_6007 DTM initialized successfully for session [SDE_PSFT_PayrollFact_Total_Full]
DIRECTOR> PETL_24033 All DTM Connection Info: [<NONE>].
MANAGER> PETL_24004 Starting pre-session tasks. : (Wed Dec 10 13:41:45 2008)
MANAGER> PETL_24027 Pre-session task completed successfully. : (Wed Dec 10 13:41:46 2008)
DIRECTOR> PETL_24006 Starting data movement.
MAPPING> TM_6660 Total Buffer Pool size is 32000000 bytes and Block size is 1280000 bytes.
READER_1_1_1> DBG_21438 Reader: Source is [HR90DEV], user [sysadm]
READER_1_1_1> DBG_21438 Reader: Source is [HR90DEV], user [sysadm]
READER_1_1_1> BLKR_16003 Initialization completed successfully.
WRITER_1_*_1> WRT_8147 Writer: Target is database [orcl], user [obaw], bulk mode [OFF]
WRITER_1_*_1> WRT_8124 Target Table W_PSFT_PAYROLL_F_TMP :SQL INSERT statement:
INSERT INTO W_PSFT_PAYROLL_F_TMP(EMPLID,EMPL_RCD,PAYGROUP,PAY_PERIOD_START_DT,PAY_PERIOD_END_DT,CHECK_DT,OFF_CYCLE,PAGE_NUM,LINE_NUM,SEPCHK,COMPANY,DEPTID,LOCATION_CD,PLAN_TYPE,BENEFIT_PLAN,BENEFIT_RCD_NBR,DEDCD,DED_CLASS,DED_SLSTX_CLASS,ADDL_NBR,PAY_EARN_START_DT,PAY_EARN_END_DT,ERNCD,COUNTRY,STATE,LOCALITY,TAX_CLASS,PAYROLL_TYPE,PAY_DETAIL_FLG,PAYROLL_AMOUNT,CHANGED_ON_DT,DATASOURCE_NUM_ID,INTEGRATION_ID,TENANT_ID,X_CUSTOM) VALUES ( ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)
WRITER_1_*_1> WRT_8270 Target connection group #1 consists of target(s) [W_PSFT_PAYROLL_F_TMP]
WRITER_1_*_1> WRT_8003 Writer initialization complete.
READER_1_1_1> BLKR_16007 Reader run started.
READER_1_1_1> PR_18039 Application Source Qualifier [mplt_BC_PSFT_PayrollFact_Total.Sq_Payroll_Total] is reading from PeopleSoft.
WRITER_1_*_1> WRT_8005 Writer run started.
WRITER_1_*_1> WRT_8158
*****START LOAD SESSION*****
Load Start Time: Wed Dec 10 13:41:46 2008
Target tables:
W_PSFT_PAYROLL_F_TMP
READER_1_1_1> PR_18008 Application SQ instance [mplt_BC_PSFT_PayrollFact_Total.Sq_Payroll_Total] User SQL Query [SELECT
PS_PAY_CHECK.COMPANY ,
PS_PAY_CHECK.PAYGROUP ,
PS_PAY_CHECK.PAY_END_DT ,
PS_PAY_CHECK.OFF_CYCLE ,
PS_PAY_CHECK.PAGE_NUM ,
PS_PAY_CHECK.LINE_NUM ,
PS_PAY_CHECK.SEPCHK ,
PS_PAY_CHECK.EMPLID ,
PS_PAY_CHECK.EMPL_RCD ,
PS_PAY_CHECK.DEPTID ,
'TOTAL_GROSS' SUMMARY_TYPE,
PS_PAY_CHECK.TOTAL_GROSS SUMMARY_AMOUNT,
PS_PAY_CHECK.CHECK_DT ,
PS_PAY_CHECK.LOCATION ,
PS_PAY_CHECK.UPDATE_DT
FROM
PS_PAY_CHECK
WHERE
PS_PAY_CHECK.PAYCHECK_STATUS IN ('A','F','R') AND
PS_PAY_CHECK.PAY_END_DT >=
UNION ALL
SELECT
PS_PAY_CHECK.COMPANY ,
PS_PAY_CHECK.PAYGROUP ,
PS_PAY_CHECK.PAY_END_DT ,
PS_PAY_CHECK.OFF_CYCLE ,
PS_PAY_CHECK.PAGE_NUM ,
PS_PAY_CHECK.LINE_NUM ,
PS_PAY_CHECK.SEPCHK ,
PS_PAY_CHECK.EMPLID ,
PS_PAY_CHECK.EMPL_RCD ,
PS_PAY_CHECK.DEPTID ,
'TOTAL_TAXES' SUMMARY_TYPE,
PS_PAY_CHECK.TOTAL_TAXES SUMMARY_AMOUNT,
PS_PAY_CHECK.CHECK_DT ,
PS_PAY_CHECK.LOCATION ,
PS_PAY_CHECK.UPDATE_DT
FROM
PS_PAY_CHECK
WHERE
PS_PAY_CHECK.PAYCHECK_STATUS IN ('A','F','R') AND
PS_PAY_CHECK.PAY_END_DT >=
UNION ALL
SELECT
PS_PAY_CHECK.COMPANY ,
PS_PAY_CHECK.PAYGROUP ,
PS_PAY_CHECK.PAY_END_DT ,
PS_PAY_CHECK.OFF_CYCLE ,
PS_PAY_CHECK.PAGE_NUM ,
PS_PAY_CHECK.LINE_NUM ,
PS_PAY_CHECK.SEPCHK ,
PS_PAY_CHECK.EMPLID ,
PS_PAY_CHECK.EMPL_RCD ,
PS_PAY_CHECK.DEPTID ,
'TOTAL_DEDUCTIONS' SUMMARY_TYPE,
PS_PAY_CHECK.TOTAL_DEDUCTIONS SUMMARY_AMOUNT,
PS_PAY_CHECK.CHECK_DT ,
PS_PAY_CHECK.LOCATION ,
PS_PAY_CHECK.UPDATE_DT
FROM
PS_PAY_CHECK
WHERE
PS_PAY_CHECK.PAYCHECK_STATUS IN ('A','F','R') AND
PS_PAY_CHECK.PAY_END_DT >=
UNION ALL
SELECT
PS_PAY_CHECK.COMPANY ,
PS_PAY_CHECK.PAYGROUP ,
PS_PAY_CHECK.PAY_END_DT ,
PS_PAY_CHECK.OFF_CYCLE ,
PS_PAY_CHECK.PAGE_NUM ,
PS_PAY_CHECK.LINE_NUM ,
PS_PAY_CHECK.SEPCHK ,
PS_PAY_CHECK.EMPLID ,
PS_PAY_CHECK.EMPL_RCD ,
PS_PAY_CHECK.DEPTID ,
'NET_PAY' SUMMARY_TYPE,
PS_PAY_CHECK.NET_PAY SUMMARY_AMOUNT,
PS_PAY_CHECK.CHECK_DT ,
PS_PAY_CHECK.LOCATION ,
PS_PAY_CHECK.UPDATE_DT
FROM
PS_PAY_CHECK
WHERE
PS_PAY_CHECK.PAYCHECK_STATUS IN ('A','F','R') AND
PS_PAY_CHECK.PAY_END_DT >= ]
READER_1_1_1> CMN_1761 Timestamp Event: [Wed Dec 10 13:41:46 2008]
READER_1_1_1> PR_18012 SQL Error [
ORA-00936: missing expression
Database driver error...
Function Name : Execute
SQL Stmt : SELECT
PS_PAY_CHECK.COMPANY ,
PS_PAY_CHECK.PAYGROUP ,
PS_PAY_CHECK.PAY_END_DT ,
PS_PAY_CHECK.OFF_CYCLE ,
PS_PAY_CHECK.PAGE_NUM ,
PS_PAY_CHECK.LINE_NUM ,
PS_PAY_CHECK.SEPCHK ,
PS_PAY_CHECK.EMPLID ,
PS_PAY_CHECK.EMPL_RCD ,
PS_PAY_CHECK.DEPTID ,
'TOTAL_GROSS' SUMMARY_TYPE,
PS_PAY_CHECK.TOTAL_GROSS SUMMARY_AMOUNT,
PS_PAY_CHECK.CHECK_DT ,
PS_PAY_CHECK.LOCATION ,
PS_PAY_CHECK.UPDATE_DT
FROM
PS_PAY_CHECK
WHERE
PS_PAY_CHECK.PAYCHECK_STATUS IN ('A','F','R') AND
PS_PAY_CHECK.PAY_END_DT >=
UNION ALL
SELECT
PS_PAY_CHECK.COMPANY ,
PS_PAY_CHECK.PAYGROUP ,
PS_PAY_CHECK.PAY_END_DT ,
PS_PAY_CHECK.OFF_CYCLE ,
PS_PAY_CHECK.PAGE_NUM ,
PS_PAY_CHECK.LINE_NUM ,
PS_PAY_CHECK.SEPCHK ,
PS_PAY_CHECK.EMPLID ,
PS_PAY_CHECK.EMPL_RCD ,
PS_PAY_CHECK.DEPTID ,
'TOTAL_TAXES' SUMMARY_TYPE,
PS_PAY_CHECK.TOTAL_TAXES SUMMARY_AMOUNT,
PS_PAY_CHECK.CHECK_DT ,
PS_PAY_CHECK.LOCATION ,
PS_PAY_CHECK.UPDATE_DT
FROM
PS_PAY_CHECK
WHERE
PS_PAY_CHECK.PAYCHECK_STATUS IN ('A','F','R') AND
PS_PAY_CHECK.PAY_END_DT >=
UNION ALL
SELECT
PS_PAY_CHECK.COMPANY ,
PS_PAY_CHECK.PAYGROUP ,
PS_PAY_CHECK.PAY_END_DT ,
PS_PAY_CHECK.OFF_CYCLE ,
PS_PAY_CHECK.PAGE_NUM ,
PS_PAY_CHECK.LINE_NUM ,
PS_PAY_CHECK.SEPCHK ,
PS_PAY_CHECK.EMPLID ,
PS_PAY_CHECK.EMPL_RCD ,
PS_PAY_CHECK.DEPTID ,
'TOTAL_DEDUCTIONS' SUMMARY_TYPE,
PS_PAY_CHECK.TOTAL_DEDUCTIONS SUMMARY_AMOUNT,
PS_PAY_CHECK.CHECK_DT ,
PS_PAY_CHECK.LOCATION ,
PS_PAY_CHECK.UPDATE_DT
FROM
PS_PAY_CHECK
WHERE
PS_PAY_CHECK.PAYCHECK_STATUS IN ('A','F','R') AND
PS_PAY_CHECK.PAY_END_DT >=
UNION ALL
SELECT
PS_PAY_CHECK.COMPANY ,
PS_PAY_CHECK.PAYGROUP ,
PS_PAY_CHECK.PAY_END_DT ,
PS_PAY_CHECK.OFF_CYCLE ,
PS_PAY_CHECK.PAGE_NUM ,
PS_PAY_CHECK.LINE_NUM ,
PS_PAY_CHECK.SEPCHK ,
PS_PAY_CHECK.EMPLID ,
PS_PAY_CHECK.EMPL_RCD ,
PS_PAY_CHECK.DEPTID ,
'NET_PAY' SUMMARY_TYPE,
PS_PAY_CHECK.NET_PAY SUMMARY_AMOUNT,
PS_PAY_CHECK.CHECK_DT ,
PS_PAY_CHECK.LOCATION ,
PS_PAY_CHECK.UPDATE_DT
FROM
PS_PAY_CHECK
WHERE
PS_PAY_CHECK.PAYCHECK_STATUS IN ('A','F','R') AND
PS_PAY_CHECK.PAY_END_DT >=
Oracle Fatal Error
Database driver error...
Function Name : Execute
SQL Stmt : SELECT
PS_PAY_CHECK.COMPANY ,
PS_PAY_CHECK.PAYGROUP ,
PS_PAY_CHECK.PAY_END_DT ,
PS_PAY_CHECK.OFF_CYCLE ,
PS_PAY_CHECK.PAGE_NUM ,
PS_PAY_CHECK.LINE_NUM ,
PS_PAY_CHECK.SEPCHK ,
PS_PAY_CHECK.EMPLID ,
PS_PAY_CHECK.EMPL_RCD ,
PS_PAY_CHECK.DEPTID ,
'TOTAL_GROSS' SUMMARY_TYPE,
PS_PAY_CHECK.TOTAL_GROSS SUMMARY_AMOUNT,
PS_PAY_CHECK.CHECK_DT ,
PS_PAY_CHECK.LOCATION ,
PS_PAY_CHECK.UPDATE_DT
FROM
PS_PAY_CHECK
WHERE
PS_PAY_CHECK.PAYCHECK_STATUS IN ('A','F','R') AND
PS_PAY_CHECK.PAY_END_DT >=
UNION ALL
SELECT
PS_PAY_CHECK.COMPANY ,
PS_PAY_CHECK.PAYGROUP ,
PS_PAY_CHECK.PAY_END_DT ,
PS_PAY_CHECK.OFF_CYCLE ,
PS_PAY_CHECK.PAGE_NUM ,
PS_PAY_CHECK.LINE_NUM ,
PS_PAY_CHECK.SEPCHK ,
PS_PAY_CHECK.EMPLID ,
PS_PAY_CHECK.EMPL_RCD ,
PS_PAY_CHECK.DEPTID ,
'TOTAL_TAXES' SUMMARY_TYPE,
PS_PAY_CHECK.TOTAL_TAXES SUMMARY_AMOUNT,
PS_PAY_CHECK.CHECK_DT ,
PS_PAY_CHECK.LOCATION ,
PS_PAY_CHECK.UPDATE_DT
FROM
PS_PAY_CHECK
WHERE
PS_PAY_CHECK.PAYCHECK_STATUS IN ('A','F','R') AND
PS_PAY_CHECK.PAY_END_DT >=
UNION ALL
SELECT
PS_PAY_CHECK.COMPANY ,
PS_PAY_CHECK.PAYGROUP ,
PS_PAY_CHECK.PAY_END_DT ,
PS_PAY_CHECK.OFF_CYCLE ,
PS_PAY_CHECK.PAGE_NUM ,
PS_PAY_CHECK.LINE_NUM ,
PS_PAY_CHECK.SEPCHK ,
PS_PAY_CHECK.EMPLID ,
PS_PAY_CHECK.EMPL_RCD ,
PS_PAY_CHECK.DEPTID ,
'TOTAL_DEDUCTIONS' SUMMARY_TYPE,
PS_PAY_CHECK.TOTAL_DEDUCTIONS SUMMARY_AMOUNT,
PS_PAY_CHECK.CHECK_DT ,
PS_PAY_CHECK.LOCATION ,
PS_PAY_CHECK.UPDATE_DT
FROM
PS_PAY_CHECK
WHERE
PS_PAY_CHECK.PAYCHECK_STATUS IN ('A','F','R') AND
PS_PAY_CHECK.PAY_END_DT >=
UNION ALL
SELECT
PS_PAY_CHECK.COMPANY ,
PS_PAY_CHECK.PAYGROUP ,
PS_PAY_CHECK.PAY_END_DT ,
PS_PAY_CHECK.OFF_CYCLE ,
PS_PAY_CHECK.PAGE_NUM ,
PS_PAY_CHECK.LINE_NUM ,
PS_PAY_CHECK.SEPCHK ,
PS_PAY_CHECK.EMPLID ,
PS_PAY_CHECK.EMPL_RCD ,
PS_PAY_CHECK.DEPTID ,
'NET_PAY' SUMMARY_TYPE,
PS_PAY_CHECK.NET_PAY SUMMARY_AMOUNT,
PS_PAY_CHECK.CHECK_DT ,
PS_PAY_CHECK.LOCATION ,
PS_PAY_CHECK.UPDATE_DT
FROM
PS_PAY_CHECK
WHERE
PS_PAY_CHECK.PAYCHECK_STATUS IN ('A','F','R') AND
PS_PAY_CHECK.PAY_END_DT >=
Oracle Fatal Error]
READER_1_1_1> CMN_1761 Timestamp Event: [Wed Dec 10 13:41:46 2008]
READER_1_1_1> BLKR_16004 ERROR: Prepare failed.
WRITER_1_*_1> WRT_8333 Rolling back all the targets due to fatal session error.
WRITER_1_*_1> WRT_8325 Final rollback executed for the target [W_PSFT_PAYROLL_F_TMP] at end of load
WRITER_1_*_1> WRT_8035 Load complete time: Wed Dec 10 13:41:46 2008
LOAD SUMMARY
============
WRT_8036 Target: W_PSFT_PAYROLL_F_TMP (Instance Name: [W_PSFT_PAYROLL_F_TMP])
WRT_8044 No data loaded for this target
WRITER_1__1> WRT_8043 ****END LOAD SESSION*****
MANAGER> PETL_24031
***** RUN INFO FOR TGT LOAD ORDER GROUP [1], CONCURRENT SET [1] *****
Thread [READER_1_1_1] created for [the read stage] of partition point [mplt_BC_PSFT_PayrollFact_Total.Sq_Payroll_Total] has completed. The total run time was insufficient for any meaningful statistics.
Thread [TRANSF_1_1_1] created for [the transformation stage] of partition point [mplt_BC_PSFT_PayrollFact_Total.Sq_Payroll_Total] has completed. The total run time was insufficient for any meaningful statistics.
Thread [WRITER_1_*_1] created for [the write stage] of partition point [W_PSFT_PAYROLL_F_TMP] has completed. The total run time was insufficient for any meaningful statistics.
MANAGER> PETL_24005 Starting post-session tasks. : (Wed Dec 10 13:41:47 2008)
MANAGER> PETL_24029 Post-session task completed successfully. : (Wed Dec 10 13:41:47 2008)
MAPPING> TM_6018 Session [SDE_PSFT_PayrollFact_Total_Full] run completed with [0] row transformation errors.
MANAGER> PETL_24002 Parallel Pipeline Engine finished.
DIRECTOR> PETL_24013 Session run completed with failure.
DIRECTOR> TM_6022
SESSION LOAD SUMMARY
================================================
DIRECTOR> TM_6252 Source Load Summary.
DIRECTOR> CMN_1740 Table: [Sq_Payroll_Total] (Instance Name: [mplt_BC_PSFT_PayrollFact_Total.Sq_Payroll_Total])
Output Rows [0], Affected Rows [0], Applied Rows [0], Rejected Rows [0]
DIRECTOR> TM_6253 Target Load Summary.
DIRECTOR> CMN_1740 Table: [W_PSFT_PAYROLL_F_TMP] (Instance Name: [W_PSFT_PAYROLL_F_TMP])
Output Rows [0], Affected Rows [0], Applied Rows [0], Rejected Rows [0]
DIRECTOR> TM_6023
===================================================
DIRECTOR> TM_6020 Session [SDE_PSFT_PayrollFact_Total_Full] completed at [Wed Dec 10 13:41:48 2008]

URL Reporting Time parameter value.

We have installed Business objects XIR2 and one of our application uses URL reporting to call a crystal report. Parameter values are retrieved from the database and used in the url. Reports that do not have a time parameter works fine. Even though I pass the time parameter value Im still prompted for the value. The format of the url I use is http://hostname/businessobjects/viewrpt.cwr?init=dhtml&apstoken=<token>&prompt0=02:02:20&prompt1=LOCCODE
where prompt0 is of type par_time. Could someone please help me with the correct format to use for parameter type time?

Ted, I checked the prompt order and the prompt type and they are correct. These reports are working fine on Crystal 9. Also reports that do not have a time parameter works fine in Crystal 11. Its only when reports with time parameter are called Im prompted for a value to be entered in hh:mm:ss format although I tried passing the value in hh:mm:ss format and Time(hh, mm, ss) format in the url. The report comes up fine after entering the value in hh:mm:ss value in the prompt. I tried encoding the url but it didnt work. If I encode the entire url Crystal prompts me to enter values for all parameters.

How to pass a run time parameter in a customized store procedure

Hi Friend
I have created customized Store Procedure for some logic. Presently i am executing the Store Procedure through the Data Manager Package.
But i need to pass a run time parameter at the time of execution the data manager package. Basically i want pass the Materail Dimension Member at the time of data manager execution .
Looking forward to your views on the same.
thanks
krish

Hi Krish,
For this, you maintain a script logic and from the script you call the stored procedure alongwith its parameters. Now build a DM on top of the script logic. While running the DM, it should ask the user to select the material members. These members will be automatically passed to the script through %MATERIAL_SET%. In your script, call the stored proc and once of the parameters should be %MATERAIL_SET%.
Hope this helps.

Running Sync BPEL process doesn't show any HTML form /XML source for input

Hi
I designed,compiled and deployed SYNC BPEL process on to server
but when I opened console and try to run the process, it doesn't show any form for input
Actually it has to take input
Where I am doing wrong...?
Thanks for any help...

Hi Praveen,
That is correct, you're not doing anything wrong. The BPEL Console doesn't show any forms for testing the services if the service is synchronous.
I test my synchronous webservices with Eviware SoapUI. This is a freeware tool. Check: http://www.soapui.org/
Just create a new project in soapUI, create a new request from WSDL, copy and paste the WSDL in soapUI. It will generate a default request for you, which you can edit and execute.
HTH,
Bas

Am told firefox is already running , but task manager doesn't show it

am told firefox is already running , but task manager doesn't show it. I installed Firefox 3.6.10 on a new computer (win 7 home premium), deleted the profile given and copied my old profile in its place (win vista premium). I get the above message and am told to close the existing process, or restart the system. Can't close and restarting doesn't help. Please solve this for me, i so don't want to use Internet Explorer

g'day people... a dude called "moopenguin32" showed me the way... alleluia
1. Copy your Firefox shortcut (what you click on to open Firefox) to the Desktop.
2. Right-click on it and click on Properties.
3. Go to the end of the text in the "Target" field. The end will say: firefox.exe"
4. Enter a space followed by: -profilemanager
5. The end result will look something like this: "C:\Program Files\Mozilla Firefox\firefox.exe" -profilemanager
6. Click OK to save the settings.
7. Double-click on the shortcut you just changed.
8. Delete the profile listed. It shouldn't matter that you're deleting it because you're trying to restore a profile anyways. You should have the profile you're trying to restore saved elsewhere.
9. Close the profile manager.
10. Start Firefox using your regular shortcut. Firefox should open properly. Close Firefox.
11. Now to restore your profile, open the profile folder you have backed up and copy the contents of it rather than the actual folder.
12. Go to your existing Firefox profile and open it.
13. Delete the contents of the existing Firefox profile.
14. Paste the contents of the Firefox profile that you're trying to restore (the one you copied in step 11).
15. Open Firefox and everything should be there (including your extensions).

I have an Ipad My apple ID and password works for Ibooks and Icloud but when I try to get into the app store it doesn't show my entire email address on the account. When I try to get into the app store it tells me my password is incorrect. How can I corr

I have an Ipad My apple ID and password works for Ibooks and Icloud but when I try to get into the app store it doesn't show my entire email address on the account. When I try to get into the app store it tells me my password is incorrect. How can I correct this? I have been emailing support but so far they have been no help

Open the App Store app, go to the Featured pane, swipe to the bottom, tap the Apple ID and sign out. Tap again and sign in with the Apple ID of your choosing.

Run-Time Error window doesn't have Retry and Ignore options

Hi,
The run-Time Error window usually have 4 bullets at the bottom part. They all used to be enabled untill recently. Somehow, I only have the Run Cleanup and Abort immediately bullets enabled. Why are the Retry and Ignore disabled? Is there an option to turn it on and off?
Thanks
Rafi

Hi,
Its possible you have operator privileges. What's user type are you running as?
Regards
Ray Farmer
Regards
Ray Farmer

I can't get firefox (Linux) to use flashplayer. I've installed a dozen times but it doesn't show up in tools/add-ons.

I've tried installing flash player a dozen times, with both the instructions on the adobe page and the mozilla page. I'm running Fedora Core 11 with Mozilla 3.5.9. I've gotten "libflashplayer.so" and copied it to every "mozilla/plugins" directory on the drive. It does not work and is not listed when I bring up "tools/add-ons." One instruction said to copy "flashplayer.xpt" to the "mozilla/commponents" directory, but the download included no such file and I have no such directory. (Probably pertains to an older version.) I've tried downloading it with the .tar, .gzip, and yum; all with the same result. It doesn't work online and doesn't show up in my plug-ins.
== This happened ==
Every time Firefox opened
== Only time I've tried to install it.

I had a problem with Fedora 15-64bit + Firefox 64bit + flash player plugins. I finally found that the plugins must be put in: /usr/lib64/mozilla/plugins.
I downloaded the 64-bit version of the flash plugins at : http://labs.adobe.com/downloads/flashplayer10_square.html Decompressed it and move the file libflashplayer.so to /usr/lib64/mozilla/plugins (you need to be super user to do that). Restarted Firefox and it worked ! My guess is that if you use 32-bit plugins then you must put them in /usr/lib64/mozilla/plugins-wrapped but I didn't try.
Arg ! It took me the whole evening to find that !

Parameter values are not showing in in the Organization Parameter form

We have done a setup for an Inventory Organization.
Everything was working fine.
Values were showing everywhere.
We have lot of transactions done in the org also.
But suddenly yesterday when I was trying to open the Organization Parameter form for that specific organization, the form came up as blank and in the bottom the error is Query caused no records.
I have checked data is there in the base table mtl_parameters.
Value is coming for other organizations. Only one specific organization is having this issue.
Even in Examine, I have taken the last query run on that form and ran the same in back end database, I can see all values are there in the database.
But in frontend screen the values are not showing. even organization code also not showing.
Navigation is: Inv Super user --> Setup --> Organization --> Parameter

Have you checked Organization Access to ensure that no one restricted that org?
Or shipping grants and roles?
I think there are quite a few places that you can restrict access.

Value doesn't show up after selection in matchcode

I made a few screenshots and put them in links to explain my problem. Thx!
I'm in MR22, the matchcode is not a standard one.
Link: [http://i698.photobucket.com/albums/vv348/su_blimo/screen1.jpg]
I click on F4 for the material
Link: [http://i698.photobucket.com/albums/vv348/su_blimo/screen2.jpg]
I Click on OK
Link: [http://i698.photobucket.com/albums/vv348/su_blimo/screen3.jpg]
I get a list of materials and doubleclick on one
Link:[http://i698.photobucket.com/albums/vv348/su_blimo/screen4.jpg]
The material doesn't show up??!!

Hi,
Make sure that the Export flag against the Material field is selected in the custom search help that you are referring to.
Values can be returned from the hit list to the input template (screen) with an export parameter.
Hope this is helpful.
Regards,
Hemanth

I use Firefox to access the internet-but when I go off the internet but don't shut down, then go back on Firefox it won't open because "it is already running". Task Manager doesn't show that it is operating so I can't shut it off. What to do?

It is in the question but to repeat.
1. When I go online I use Mozilla Firefox
2. While I am doing other work, I usually close the internet.
3. If I go back on the internet and click on Mozilla it won't come up, stating that "it is already running".
4. Despite that, when I open Task Manager, it doesn't show that it is running so I can't shut it down or open it.
5. If I log off or shut off the computer, then after I log in or reboot the computer, I can open Mozilla.
Thanks from a Mozilla fan.

See "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
See "Firefox hangs when you quit it":
*https://support.mozilla.com/kb/Firefox+hangs

Why Mail doesn't show content of emails?

Since some days Apple Mail doesn't show always the content of an e-mail message. In the window at the right hand of the columns with folders and incoming mail and in the fullscreen mode only the headers (To, From, Subject) are visible, not the content (text, images, attachments). If there is an attachment, I can see that by clicking 'show in Quicklook'.
The problem started a couple of days ago. And sometimes Mail shows the content after receiving an e-mail, immediately after a first view no more.
Rebuilding the mailbox doesn't change this.
Thanks for your suggestions to solve this problem.

Quit Mail. Force quit if necessary.
Back up all data. That means you know you can restore the Mail database, no matter what happens.
Triple-click the text on the line below to select it:
~/Library/Mail/V2/MailData/Envelope Index
Copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder
from the menu bar. Paste into the box that opens (command-V), then press return.
A Finder window will open with a file selected. Move the selected file to the Desktop, leaving the window open. Other files in the folder may have names that begin with "Envelope Index". Move those files, if any, to the Trash.
Log out and log back in. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is corrupt and that Mail has to quit. Click OK.
Test. If Mail now works as expected, you can delete the file you moved to the Desktop. Otherwise, post your results.

Run time parameter

hi,
I want to insert parameter while report is running.
please help

what do you mean exactly? wouldn't it be simpler to just pass the parameter at the start of the report? what do you mean by "while report is running"?

How to Bold Characters at run time

Actually,
I am developing a form in which I am having a huge text item with a huge size and its multiline property set yes .Basically I want to use that item just as MS-WORD also i want to give the users a features of making their typed character "BOLD","UNDERLINE".How to provide this facility in that item.I am using Forms6i, and Oracle 9i.Plz help me..............................................

...but...
here is the code you can paste in your 6i version
KEY-COMMIT form-level trigger
:HTML_TABLE.TEXT := Get_Custom_Property( 'HTML_TABLE.HTML_BEAN', 1, 'GET_TEXT' ) ;
commit_form ;POST-QUERY on the HTML_TABLE block
If :HTML_TABLE.TEXT IS NOT NULL Then
Set_Custom_Property( 'HTML_TABLE.HTML_BEAN', 1, 'SET_TEXT', :HTML_TABLE.TEXT ) ;
Else
Set_Custom_Property( 'HTML_TABLE.HTML_BEAN', 1, 'SET_TEXT', '<HTML><BODY></BODY></HTML>' ) ;
End if ;WHEN-NEW-RECORD-INSTANCE of the HTML_TABLE block
If :HTML_TABLE.TEXT IS NOT NULL Then
Set_Custom_Property( 'HTML_TABLE.HTML_BEAN', 1, 'SET_TEXT', :HTML_TABLE.TEXT ) ;
Else
Set_Custom_Property( 'HTML_TABLE.HTML_BEAN', 1, 'SET_TEXT', '<HTML><BODY></BODY></HTML>' ) ;
End if ;WHEN-CUSTOM-ITEM-EVENT of the HTML_TABLE.HTML_ITEM item:
:HTML_TABLE.TEXT := Get_Custom_Property( 'HTML_TABLE.HTML_BEAN', 1, 'GET_TEXT' ) ;Francois

French characters in run time parameter values doesn't show up in emails

Similar Messages

Maybe you are looking for