Run VL06 in Background and getting the report in AL11
Hello ,
My requirement is as follows.
I need to develop a program which should VL06 tcode for Listing the Outbound deliveries in BACKGROUND with a specific variant and Layout and then the report data should be dumped to the given AL11 file path .No need to display the report.
I tried with Submit statement but here I can use the variant but not Layout option as Layout field is not the part of selection screen of VL06 tcode for lsitingthe outbound deliveries.
Can anybody please advice about how to proceed with this.
Thanks in Advance.....
Hello ,
Thanks for the reply ....
I tried with that ..i could see the list ...but i wanted to capture the same with predefined layout inthe result ofthe report .
There is no layout selction option in the selectionscreen of the report.
Please advice.
Similar Messages
-
Can we call a transaction in background and get the list in report?
I want to call the standard T-Code MC.9 from a report in background using Call Transaction and get the list in the report.There are some enhancement done to its base program RMCB0300 due to which if I use Submit ... exporting to memory and then import the list from memory, the result doesnt match to the values given by T-Code MC.9.
The option apparently for me is to use Call Transaction method, but if I use Call transaction method, how do I make the report to be executed in background and then get the resultant list in the report?Copy the program in Z and than modify it saving the list on memory on database table.
-
How to run commands like "ipconfig" and get the output in adobe AIR in windows?
import flash.desktop.NativeProcess;
import flash.desktop.NativeProcessStartupInfo;
if (NativeProcess.isSupported) {
var npsi:NativeProcessStartupInfo = new NativeProcessStartupInfo();
var processpath:File = File.applicationDirectory.resolvePath("MyApplication.whatever");
var process:NativeProcess = new NativeProcess();
npsi.executable = processpath;
process.start(npsi);
The above can only run a sub-application, but how to run an independent application(command) like ipconfig and get the result?Hi,
here is an example of running a net Use command line from AIR, unig the new NativeProcess. Hope it will help !
function launchProcess()
var file = air.File.applicationDirectory;
// set command path
file = file.resolvePath("C:/Windows/system32/net.exe");
var nativeProcessStartupInfo = new air.NativeProcessStartupInfo();
nativeProcessStartupInfo.executable = file;
// prepare command parameters
var args = new runtime.Vector["<String>"]();
args.push('USE');
args.push('W:');
args.push('/delete');
args.push('/y');
// set arguments
nativeProcessStartupInfo.arguments = args;
// add listeners to catch command outputs
process.addEventListener(air.ProgressEvent.STANDARD_OUTPUT_DATA, onOutputData);
process.addEventListener(air.ProgressEvent.STANDARD_ERROR_DATA, onErrorData);
process.addEventListener(air.NativeProcessExitEvent.EXIT, onExit);
// create and run Native process
process = new air.NativeProcess();
process.start(nativeProcessStartupInfo);
function onOutputData(ProgressEvent)
var processResults = process.standardOutput.readUTFBytes(process.standardOutput.bytesAvailable);
air.trace("Results: \n" + processResults);
function onErrorData(ProgressEvent)
var processResults = process.standardError.readUTFBytes(process.standardError.bytesAvailable);
if(processResults.search('password') > -1){
window.alert('Bad password');
air.trace("Errors: \n" + processResults);
function onExit(NativeProcessExitEvent)
air.trace("Process ended with code: " + NativeProcessExitEvent.exitCode); -
Running report and get the report result with coding
Hi all,
In our R/3 system, there is a custom sales report.
My question is: is there possibility to get data by running this report and grab it the result with code and store it in internal table?
Sorry if my question too basic because I am not abaper
I am just wondering to find new solution for my project.
Regards,
StephMy requirement is: I want to get the result from this report
(rather than try to get the data from SAP original table, because this report is very complicated with a lot of selection data) and use it this result into my new program.
The mechanism that I want is pull the result from the current report, not to add some code in current report to push into new program, to avoid changed the report.
Btw, the output of this report not only the excel file, we can also run this report on foreground mode and see the result.
The report is not ALV report.
Regards,
Steph -
Having trouble in running a unix command and getting the output
Hi,
I am trying to run a unix command from within the java code. I am not able to make it work. I am enclosing the code and the error message that I am getting. Any help is highly appreciated.
import java.io.*;
public class RunCommand {
public static void main(String args[]) {
String s = null;
try {
Process p = Runtime.getRuntime().exec("cat UNIX_ASCII_TEXT_FILE | A_UNIX_PROGRAM -d");
BufferedReader stdInput = new BufferedReader(new InputStreamReader(p.getInputStream()));
BufferedReader stdError = new BufferedReader(new InputStreamReader(p.getErrorStream()));
// read the output from the command
System.out.println("Here is the standard output of the command:\n");
while ((s = stdInput.readLine()) != null) {
System.out.println(s);
// read any errors from the attempted command
System.out.println("Here is the standard error of the command (if any):\n");
while ((s = stdError.readLine()) != null) {
System.out.println(s);
System.exit(0);
catch (IOException e) {
System.out.println("exception happened - here's what I know: ");
e.printStackTrace();
System.exit(-1);
}The error message that I am getting is
Here is the standard output of the command:
SLu|%%$$=
Here is the standard error of the command (if any):
cat: cannot open |
cat: cannot open A_UNIX_PROGRAM
cat: cannot open -dLooks like the cat command is working and not the pipe command and the command after the pipe. But when I run the UNIX command from the command prompt I get the expected result.You might read this article and see if its approach works.
http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html -
Creating a dynamic query by choosing the field and getting the report
Hi,
Is there a way to create a report by allowing the user to choose a field from the table and design a query based on that field.
Ex In a table students with fields
(StudentNo, StudentName,Age,Qualification,Hobbies, PlaceofBirth)
Is it possible to generate a query
select * from students where Hobbies=programming;
where the user can be given the option of selecting the field and the value (Hobbies, programming), the query is generated for that, then the report is designed for that query. How could the query be generated?
Regards,
ReshmaYou sure can ;)
Here's an example.
You can create a JComboBox and have the different categories of hobbies in there and then use ActionListener on the JcomboBox.
The code will be something like this
public void actionPerformed(ActionEvent ae)
if(ae.getSource()==combo) //assuming the JComboBox object is combo
String query=new String("");
String st = combo.getSelectedItem().toString();
Connection connection=DriverManager.getConnection("jdbc:odbc:DSN","user","password");
Statement stmt=connection.createStatement();
String qry="SELECT * FROM tablename WHERE hobby=";
String query=qry+st;
ResultSet rs=stmt.execute(query); //Then do whatever you want with the ResultSet object
} -
Run the Report as a Background job and Get the Output in Excel in Local PC
Hello Gurus,
I have one following requirement.
One should be able to run the report as a background job and it should be possible to get the report in Excel format, also when running the report in background. The excel report should have the same information and look as the current SAPreport.
Please provide some solution.
Any helpful answer get surely awarded.
Thanks a lot,
VarlanirGUI_* WS_* Function In Background, CSV Upload
GUI_* and WS_* function modules do not work in background
When scheduling a job in the background the appropriate statement to read in your file is OPEN DATASET, and the file must be on the file system that the SAP server can see.
At anytime, a user can switch of the Personal Computers even though the job is still running in the background. Therefore GUI_* and WS_* function modules are not designed to work in that way, as they need to access your personal computer file.
To choose the correct download method to used, you can check the value of SY-BATCH in your code,
if it is 'X' use OPEN DATASET and if it is ' ' use WS_UPLOAD.
*-- Open dataset for reading
DATA:
dsn(20) VALUE '/usr/test.dat',
rec(80).
OPEN DATASET dsn FOR INPUT IN TEXT MODE.
IF sy-subrc = 0.
DO.
READ DATASET dsn INTO rec.
IF sy-subrc <> 0.
EXIT.
ELSE.
WRITE / rec.
ENDIF.
ENDDO.
ENDIF.
CLOSE DATASET dsn.
*-- Open dataset for writing
DATA rec(80).
OPEN DATASET dsn FOR OUTPUT IN TEXT MODE.
TRANSFER rec TO '/usr/test.dat'.
CLOSE DATASET dsn.
What is the difference when we use upload, ws_upload, gui_upload function modules?
UPLOAD, WS_UPLOAD, GUI_UPLOAD, are used in BDC concepts. ie., Batch Data Communication.
Batch Data Conversion is a concept where user can transfer the Data from non SAP to SAP R/3. So , in these various Function Modules are used.
UPLOAD--- upload a file to the presentation server (PC)
WS_UPLOAD---- Load Files from the Presentation Server to Internal ABAP Tables.
WS means Work Station.
This is used upto SAP 4.6 version.
GUI_UPLOAD------- Replaces WS_UPLOAD. Upoad file from presentation server to the app server. From 4.7 SAP version it is replaced.
How to Upload csv file to SAP?
Common File Download Upload Questions:
How you upload the data from text file to sap internal table? From my knowledge its by upload or gui_upload.
How you download the data from sap internal table to text file?
How you upload the data from xls (excel) file to sap internal table how you download the data from sap internal table to xls(excel) file.
You can upload data from presentation server to an internal table using gui_upload. Use gui_download to download from internal table to flat file.
Use fm ALSM_EXCEL_TO_INTERNAL_TABLE to upload data frm excel.
Use function module GUI_UPLOAD
The FILETYPE refer to the type of file format you need: For e.g 'WK1' - Excel format , 'ASC' - Text Format etc.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = 'C:\test.csv'
FILETYPE = 'ASC'
TABLES
DATA_TAB = itab
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17. -
I'm trying to download the latest version of iTunes and get the message "There is a problem with this Windows Installer package. A program required for this install to complete could not be run." I have no clue what to do with this to resolve the issue. Thanks for any help!
Repair your Apple software update.
Go to START > ALL PROGRAMS > Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU, go to Control Panel:
START > CONTROL PANEL/ > Add n Remove Programs, highlight ASU and click CHANGE then REPAIR -
When I publish a SWF/HTML5 module with Captivate 8 and try to run it using IE9 - I get the following error "The content you are viewing is not supported in the current Document Mode" - anyone know why?
TLCMediaDesign wrote:
I've seen a lot of threads about getting rid of these kind of messages. Those messages are there for a reason most of the time. If you have CSS animations or other HTML5 standards that cannot be rendered in IE9 they won't magically start working becuse you got rid of a message. I use IE9 since that is the minimum standard for the client. I have never seen that message publishing to HTML5 content.
IMO, if your client has IE9 I think that you should develop with IE9 in mind not IE11.
When you say "develop with IE9 in mind not IE11" do you mean use SWF instead of HTML5? I used the standard question types, and a converted PowerPoint presentation. I didn't add anything out of the ordinary. -
I have Photoshop CS5 Extended and it says updates available but when i download the updates it says updates failed please try again later, i have tried a few times and get the same message any help would be great i am running 64bit on windows 8.
I am running Windows 7 64 bit ultimate and have the same problem. My hard drive crashed, installed a new one and then reinstalled CS5 extended. Installation went fine, but can no longer open my camera RAW files from Photoshop (camera is a Canon EOS T2i. The message also tells me I am not eligible for the update. I am... and I cannot open my files and I could before. I can find nowhere to contact Adobe to tell me how to proceed. My daughter is all a registered user of the same product and she had no problems upgrading... we purchased ours each at the same time. I do know the difference is that I had to reinstall and she did not. If that means anything.
-
Help please, I have an old iMac running OS X 10.2.8 and lost internet capabilities, how do I update and get the internet back?
Was it connected to the internet before, and if so how?
-
Submit report in background and get result into calling program
Hi,
I want to call the standard SAP program from Zprogram to create invoice using Submit. here the code
SUBMIT RV60SBT1 TO SAP-SPOOL
SPOOL PARAMETERS print_parameters
WITHOUT SPOOL DYNPRO
VIA JOB name NUMBER number
WITH VKOR1 eq TVKO-VKORG
with X_VBELN eq gv_vbeln_so
with ALLEA eq 'X'
with ALLEL eq ''
AND RETURN.
the standard SAP program creates invoice (billing document number). I want to get the billing document number which created using the above statement into the calling program. ......could anyone pls tell me how to do this? ie how to read the billing document number in the calling program.
Regrds
shan
Edited by: Shankar Raju Devadoss on Mar 21, 2011 9:00 AMHi Shankar,
You can try it in both ways.
1. By using the parameter ID VF. (GET PARAMETE ID)
2. Select the invoice numbers from the table VBRK for the current date (SY-DATUM) and
sort it by time and get the latest invoice.
Regards
Hareesh Menon -
How to get the Report Names which use a Folder in Discoverer Administrator?
Hello All,
How could I get which Reports in discoverer Desktop are using a particular folder in Discoverer Administrator?
Or
How to know which Discoverer Desktop Reports are being derived from a folder in Discoverer Administrator?
We have Oracle 9i DS installed and have a Custom Folder Created in the Administrator, and want to know exactly which Reports/Workbooks are using that folder?
Thanks in advance :)Well Abhijit,
The eul workbooks have been created by oracle specifically to analyze your eul and make your work easier!. So, I prefer this way to view the information about my eul in a report format in the desktop. Try it! you may like it.
If you want you can follow these steps:
Run the script called eul5.sql located in <discoverer_installation_path>\discoverer\util in the user who own the eul in the database.
Then import the eul5.eex file located at <discoverer_installation_path>\discoverer\ in the discoverer administrator.
Then login into desktop and open the reports in the database, you can see a report called[b] EUL Workbook Management. Open that and goto the sheet named Workbook Dependency - Folders & Items Lookup. I think it the last but one worksheet in that workbook.
Hope it helps you! -
Morning all,
I've just been assigned a report-related project but I have not created much of anything in C# or .Net before!
I was wondering if someone could help me get started. Here are the specifications:
Basically, I am to create an automated report application. I have the query and I will include it further down
in this post. The page is to have a couple blanks to specify the Start Date and End Date and replace those dates in the query, and generate the report. What I need some help on is how to make the SQL query work in the application which I will connect to the
intended database to generate the report (basic I know, but I'm new at this) on Visual Studio 2010. I also need some help on programming the Start Date blank and End Date blank so that what the user types in for those blanks will replace the date fields in
the SQL query, then generate the report with the new dates.
I appreciate the help!
The SQL query and what the dates are replacing:
select
PTH.INST_ID ,
PTH.EMPLOYEE_ID,
DBH.HR_DEDUCTION_AND_BENEFITS_CODE,
replace(DB.DESCRIPTION,',',''),
DB.WITHHOLDING_LIABILITY_ACCOUNT_MASK,
DBH.HR_DEDUCTION_AND_BENEFITS_ID,
DBH.CHECK_DATE,
DBH.CHECK_NO,
DBH.FIN_INST_ACCT_ID,
replace(replace (DBH.COMMENT,CHAR(10),' '),CHAR(13),' '),
DBH.HR_DEDUCTION_AND_BENEFIT_CYCLE_CODE,
DBH.LENGTH,
DBH.EMPLOYEE_COMPUTED_AMOUNT,
DBH.EMPLOYEE_BANK_ROUTING_NUMBER,
DBH.EMPLOYEE_ACCOUNT_TYPE,
DBH.EMPLOYEE_ACCOUNT_NUMBER,
DBH.EMPLOYER_COMPUTED_AMOUNT,
DBH.EMPLOYEE_GROSS_AMOUNT,
DBH.EMPLOYER_GROSS_AMOUNT,
DBH.PAYROLL_EXCLUDE,
PTH.VOID_DATE,
PTH.BATCH_QUEUE_ID,
B.BATCH_CODE,
BQ.FY,
BQ.END_DATE,
BQ.COMMENTS,
BQ.BATCH_CRITERIA_USED,
BP.COLUMN_VALUE,
PTH.REPLACEMENT,
P.LAST_NAME,
P.FIRST_NAME,
P.MIDDLE_NAME
from PY_EMPLOYEE_TAX_HISTORY PTH
INNER JOIN PERSON_EMPLOYEE PE ON
PE.INST_ID=PTH.INST_ID AND
PE.EMPLOYEE_ID=PTH.EMPLOYEE_ID
INNER JOIN PERSON P ON
PE.INST_ID=P.INST_ID AND
PE.PERSON_ID=P.PERSON_ID
LEFT JOIN HR_EMPLOYEE_DEDUCTIONS_AND_BENEFITS_HISTORY DBH ON
PTH.INST_ID=DBH.INST_ID AND
PTH.CHECK_DATE=DBH.CHECK_DATE AND
PTH.CHECK_NO=DBH.CHECK_NO AND
PTH.EMPLOYEE_ID=DBH.EMPLOYEE_ID
LEFT JOIN HR_DEDUCTION_AND_BENEFITS DB ON
DB.INST_ID=DBH.INST_ID AND
DB.HR_DEDUCTION_AND_BENEFITS_CODE=DBH.HR_DEDUCTION_AND_BENEFITS_CODE
LEFT JOIN BATCH_QUEUE BQ ON
PTH.BATCH_QUEUE_ID=BQ.BATCH_QUEUE_ID
LEFT JOIN BATCH B ON
B.BATCH_CODE=BQ.BATCH_CODE
LEFT JOIN BATCH_PARAMETER BP ON
BQ.BATCH_QUEUE_ID=BP.BATCH_QUEUE_ID
AND BP.COLUMN_NAME = 'SUPPRESS_DIRECT_DEPOSIT'
------Please change the WHERE condition for date range of the month you need to run this for.
WHERE PTH.CHECK_DATE >='07/01/2013'
AND PTH.CHECK_DATE <='07/31/2013'
and BQ.BATCH_CODE='BAT_PY_PAYCALC'
and bq.fy=2014
ORDER BY PTH.INST_ID ,
PTH.EMPLOYEE_ID,
DBH.HR_DEDUCTION_AND_BENEFITS_CODE,
DBH.CHECK_DATETry this code. The Server name will be the same name when you use SQL Server Management Studio (SSMS). It is in the login window for SSMS. I assume you are using SQLSTANDARD (not SQLEXPRESS) which is in the connection string in the code
below. I also assume you have remote connection allowed in the database.
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Data;
using System.Data.SqlClient;
namespace ConsoleApplication1
class Program
const string DATABASE = "Enter Database Name Here";
const string SERVER = "Enter Server Name Here";
static void Main(string[] args)
DateTime startDate = DateTime.Parse("07/01/2013");
string startDateStr = startDate.ToString("MM/dd/yyyy");
DateTime endDate = new DateTime(startDate.Year, startDate.Month + 1, 1).AddDays(-1);
string endDateStr = endDate.ToString("MM/dd/yyyy");
string connStr = string.Format("Server={0}\\SQLSTANDARD;Database={1};Trusted_Connection= True;", SERVER,DATABASE);
string SQL = string.Format(
"select\n" +
" PTH.INST_ID\n" +
",PTH.EMPLOYEE_ID\n" +
",DBH.HR_DEDUCTION_AND_BENEFITS_CODE,\n" +
",replace(DB.DESCRIPTION,',','')\n" +
",DB.WITHHOLDING_LIABILITY_ACCOUNT_MASK\n" +
",DBH.HR_DEDUCTION_AND_BENEFITS_ID\n" +
",DBH.CHECK_DATE\n" +
",DBH.CHECK_NO\n" +
",DBH.FIN_INST_ACCT_ID\n" +
",replace(replace (DBH.COMMENT,CHAR(10),' '),CHAR(13),' ')\n" +
",DBH.HR_DEDUCTION_AND_BENEFIT_CYCLE_CODE\n" +
",DBH.LENGTH\n" +
",DBH.EMPLOYEE_COMPUTED_AMOUNT\n" +
",DBH.EMPLOYEE_BANK_ROUTING_NUMBER\n" +
",DBH.EMPLOYEE_ACCOUNT_TYPE\n" +
",DBH.EMPLOYEE_ACCOUNT_NUMBER\n" +
",DBH.EMPLOYER_COMPUTED_AMOUNT\n" +
",DBH.EMPLOYEE_GROSS_AMOUNT\n" +
",DBH.EMPLOYER_GROSS_AMOUNT\n" +
",DBH.PAYROLL_EXCLUDE\n" +
",PTH.VOID_DATE\n" +
",PTH.BATCH_QUEUE_ID\n" +
",B.BATCH_CODE\n" +
",BQ.FY\n" +
",BQ.END_DATE\n" +
",BQ.COMMENTS\n" +
",BQ.BATCH_CRITERIA_USED\n" +
",BP.COLUMN_VALUE\n" +
",PTH.REPLACEMENT\n" +
",P.LAST_NAME\n" +
",P.FIRST_NAME\n" +
",P.MIDDLE_NAME\n" +
" from PY_EMPLOYEE_TAX_HISTORY PTH\n" +
" INNER JOIN PERSON_EMPLOYEE PE ON\n" +
" PE.INST_ID=PTH.INST_ID AND\n" +
" PE.EMPLOYEE_ID=PTH.EMPLOYEE_ID\n" +
" INNER JOIN PERSON P ON\n" +
" PE.INST_ID=P.INST_ID AND\n" +
" PE.PERSON_ID=P.PERSON_ID\n" +
" LEFT JOIN HR_EMPLOYEE_DEDUCTIONS_AND_BENEFITS_HISTORY DBH ON\n" +
" PTH.INST_ID=DBH.INST_ID AND\n" +
" PTH.CHECK_DATE=DBH.CHECK_DATE AND\n" +
" PTH.CHECK_NO=DBH.CHECK_NO AND\n" +
" PTH.EMPLOYEE_ID=DBH.EMPLOYEE_ID\n" +
" LEFT JOIN HR_DEDUCTION_AND_BENEFITS DB ON\n" +
" DB.INST_ID=DBH.INST_ID AND\n" +
" DB.HR_DEDUCTION_AND_BENEFITS_CODE=DBH.HR_DEDUCTION_AND_BENEFITS_CODE\n" +
" LEFT JOIN BATCH_QUEUE BQ ON\n" +
" PTH.BATCH_QUEUE_ID=BQ.BATCH_QUEUE_ID\n" +
" LEFT JOIN BATCH B ON\n" +
" B.BATCH_CODE=BQ.BATCH_CODE\n" +
" LEFT JOIN BATCH_PARAMETER BP ON\n" +
" BQ.BATCH_QUEUE_ID=BP.BATCH_QUEUE_ID\n" +
" AND BP.COLUMN_NAME = 'SUPPRESS_DIRECT_DEPOSIT'\n" +
" WHERE PTH.CHECK_DATE >='{0}'\n" +
" AND PTH.CHECK_DATE <='{1}'\n" +
" and BQ.BATCH_CODE='BAT_PY_PAYCALC'\n" +
" and bq.fy=2014\n" +
" ORDER BY PTH.INST_ID\n" +
",PTH.EMPLOYEE_ID\n" +
",DBH.HR_DEDUCTION_AND_BENEFITS_CODE\n" +
",DBH.CHECK_DATE", startDateStr, endDateStr);
SqlDataAdapter adapter = new SqlDataAdapter(SQL, connStr);
DataTable dt = new DataTable();
adapter.Fill(dt);
jdweng
Could you elaborate more on what this code does in general?
Does it generate a table with the data between specified dates? If so, where is the table shown?
Where does one enter in the specified start and end dates on the Web Application? Do I have to create start and end date blanks and link them to the code for it to work?
Sorry for the inconvenience - I'm just really new at this. Thanks! -
How can I get the report status?
I am using web service to connect to BI Publisher and run the report by java code. And I have questions still unclear, anyone who knows about it please help me.
1. Is there any method to get the report status, such as whether the report runs successfully or not.
2. If I have a huge table that binds with the template (maybe RTF template), how about the performance of the BI publisher?
3. I use the sample codes in the web service tutorial to run the report, but the out pdf report doesn't change when i add or remove the table data, how can I resolve it?
Thanks very much.Use the web services and use this function
getScheduledReportStatus
you will get the status of the report ran.
Possible values are: "Completed", "Error" "Running", "Scheduled","Suspended", "Unknown"
It is in the table XMLP_SCHED_OUTPUT status column :)
Maybe you are looking for
-
10.6.8 update added a non functioning app...
It seems the 10.6.8 update added Photo Booth to my applications folder. The icon has the "No" symbol on top of it, and clicking on it brings up the message: "You cant open the application Photo Booth because it may be damaged or incomplete." It seems
-
Uploading CSS Style Sheet From Remote
Morning all, Rather new to dreamweaver but I have setup up a remote host on my home pc and when I upload my site to my cpanel I use save to remote server to upload the file when I am happy with the page. I always get one error that says the css didn'
-
Closing open PO with archive contract
Hi Gurus, Need your expert advise on below issue. Contract XXXXXX has already been archived, but there is an open PO YYYYY tied to it. How do we go about closing this open PO? There is an error message that buyers get when they try to check the deli
-
Need a Userexit for ME51N, ME52N to access data in Account Assignment Tab
Hi, I am currently using Enhancement MEREQ001, EXIT_SAPLMEREQ_005 to check line item data and display an error message. That works fine. My need now is to access the Order Number entered under the Account Assignment tab. The import parameter IM_D
-
Hi Experts, I have a problem with XI/PI cache for scenario RFC-PI-Queue.After 4 hours, Receiver Communication Channel has error if i run this program in background with schedule is every minute. when I refresh cache (http://domain:port/CPACache/re