Running 9i on web dowsn't work

I'm a 6i developer , I Installed the 9i tool on my Developer suite on my computer , IIt works very good with 9i reports as it connect and run with no problems , But when using the 9i forms it only connect right , but when running the form it open the Internet browser and the cursor changes to the loading mood But views no result ...
I Read something about COnfiguring the ( Application server URL ) I configured it to (http://billy707:1521/forms90/f90servlet) where billy707 IS my computer Name ANd 1521 IS the Standard Port FOr the TCP/IP

Have you gone to the Adobe site to download the current level of Flash? http://www.adobe.com/downloads/

Similar Messages

Forms 6i Web test not working on NT

Installed Forms and Report 6i developer and server, 8i and also have WebDB listener installed and running. The Web report test works but when I run the test.fmx though the supplied .htm submission form, my dial-up networking window pops up and I see a small icon in the upper left corner of the brower window which I assume is the form trying to run. When I cancel the dial-up networking window the icon goes away and the the browser window says "Done" and no form is displayed. It can't figure out what type or conflict I am having or what parameter I need to adjust. Help?
Thanks
null

sarah,
Here Abhishek is talking about the Forms 6i Help, not about Forms 10g. And the help shortcut F1 is the default for windows, and its not there in the C:\DevSuiteHome_1\forms\fmrweb.res file.
Regards,
Manu.

My Macbook Pro is 3 years old. Lately I have noticed that after charging the available battery time is approximately 3:30. This is with little or nothing running. And sure enough after 3:30 hours of mixed use (email, web surfing, file work) it's done.

My Macbook Pro is 3 years old. Lately I have noticed that after charging the battery life indicated is approximately 3:30; this is with little or nothing running. And sure enough after about 3:30 of mixed use (email, web srfing, file work) it's done. I'm thinking I should be getting better than that; at least twice that number.

So I am sitting in Nagoya and have plugged in the hotel LAN cable because the WiFi wasn't kicking in and my battery capacity is 6-7 hours! Most other places had a good reliable WiFi which is what I would normally use; I'm thinking the WiFi is a bit of a battery-hog. Stuff you learn.

SharePoint 2010 web analytics not working

Hello guys -I have setup a sharepoint farm, 1 app, 2 wfe (windows server 2008 r2) and sql server 2008 r2 DB. All service applications are functioning except web analytics. I have deleted and recreated again but still have no effect. It is creating
usage files.
interestingly Central admin site collection web analytics are working but when i check in a web application site collection web analytics report i have the below message.Not sure what I am missing. Can any one help me how to trace the issue:
There is no data available for this report. Here are some possible reasons: (1) Web Analytics has not been enabled long enough to generate data; (2) There is insufficient data to generate this report; (3) Data logging required for this report might
not be enabled; (4) Data aggregation might not be enabled at the level required for this report
Appreciate your help.
wm.

Yes, they are also Started.
To make sure - I have checked off and re enabled usage data collection. Restarted the above services. And also re run the timer job "Web Analytics Trigger Workflows Timer Job
". nothing seems helping
I have set diagnostic logiging to Web Analytics Service - verbose both event and trace and observed the below:
02/04/2011 14:30:00.19 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 852e High Preparing to import '6' usage log files found with filter 'SHAREPOINTSER1-????????-?????.usage'. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:01.13 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 852n High Flushing usage entry cache to storage (count=1211). 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:01.13 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 85f9 High Calling ImportEntries method for usage definition 'Microsoft.SharePoint.Administration.SPTimerJobUsageDefinition' with
'47' entries. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:02.36 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 852u High Called ImportEntries method for usage definition 'Microsoft.SharePoint.Administration.SPTimerJobUsageDefinition'. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:02.36 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 85f9 High Calling ImportEntries method for usage definition 'Microsoft.SharePoint.Administration.SPRequestUsageDefinition' with
'1160' entries. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:02.91 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 884c High Calling 'UsageImported' method of Usage Receiver 'Microsoft.SharePoint.Administration.SPUsageReceiverDefinition' for
Usage Definition 'Microsoft.SharePoint.Administration.SPRequestUsageDefinition'. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:02.91 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 884d High Instantiating usage receiver 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:02.91 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 884k High Instantiated usage receiver 'Microsoft.Office.Server.WebAnalytics.UsageLogging.SPRequestUsageReceiver'. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:02.91 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 884n High Executing receiver method 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:03.47 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 884o High Executed receiver method. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:03.47 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 884m High Called 'UsageImported' method of Usage Receiver 'Microsoft.SharePoint.Administration.SPUsageReceiverDefinition' for Usage
Definition 'Microsoft.SharePoint.Administration.SPRequestUsageDefinition'. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:03.47 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 852u High Called ImportEntries method for usage definition 'Microsoft.SharePoint.Administration.SPRequestUsageDefinition'. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:03.47 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 85f9 High Calling ImportEntries method for usage definition 'Microsoft.SharePoint.Administration.SPFeatureUsageDefinition' with
'4' entries. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:03.56 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 852u High Called ImportEntries method for usage definition 'Microsoft.SharePoint.Administration.SPFeatureUsageDefinition'. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:03.56 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 852v High Flushed usage entries cache to storage. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.02 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 852n High Flushing usage entry cache to storage (count=432). 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.02 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 85f9 High Calling ImportEntries method for usage definition 'Microsoft.SharePoint.Administration.SPRequestUsageDefinition' with
'259' entries. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.25 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 884c High Calling 'UsageImported' method of Usage Receiver 'Microsoft.SharePoint.Administration.SPUsageReceiverDefinition' for
Usage Definition 'Microsoft.SharePoint.Administration.SPRequestUsageDefinition'. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.25 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 884d High Instantiating usage receiver 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.25 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 884k High Instantiated usage receiver 'Microsoft.Office.Server.WebAnalytics.UsageLogging.SPRequestUsageReceiver'. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.25 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 884n High Executing receiver method 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.38 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 884o High Executed receiver method. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.38 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 884m High Called 'UsageImported' method of Usage Receiver 'Microsoft.SharePoint.Administration.SPUsageReceiverDefinition' for Usage
Definition 'Microsoft.SharePoint.Administration.SPRequestUsageDefinition'. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.38 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 852u High Called ImportEntries method for usage definition 'Microsoft.SharePoint.Administration.SPRequestUsageDefinition'. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.38 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 85f9 High Calling ImportEntries method for usage definition 'Microsoft.SharePoint.Administration.SPTimerJobUsageDefinition' with
'172' entries. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.47 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 852u High Called ImportEntries method for usage definition 'Microsoft.SharePoint.Administration.SPTimerJobUsageDefinition'. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.47 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 85f9 High Calling ImportEntries method for usage definition 'Microsoft.SharePoint.Administration.SPFeatureUsageDefinition' with
'1' entries. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.53 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 852u High Called ImportEntries method for usage definition 'Microsoft.SharePoint.Administration.SPFeatureUsageDefinition'. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.53 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 852v High Flushed usage entries cache to storage. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.61 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 852m High Deleting usage log file 'D:\SHRPT_UsageDataLogs\SHAREPOINTSER1-20110204-1356.usage' after data import. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.61 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 852m High Deleting usage log file 'D:\SHRPT_UsageDataLogs\SHAREPOINTSER1-20110204-1401.usage' after data import. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.61 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 852m High Deleting usage log file 'D:\SHRPT_UsageDataLogs\SHAREPOINTSER1-20110204-1406.usage' after data import. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.61 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 852m High Deleting usage log file 'D:\SHRPT_UsageDataLogs\SHAREPOINTSER1-20110204-1411.usage' after data import. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.61 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 852m High Deleting usage log file 'D:\SHRPT_UsageDataLogs\SHAREPOINTSER1-20110204-1416.usage' after data import. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:05.63 OWSTIMER.EXE (0x1840) 0x13A8 SharePoint Foundation Usage Infrastructure 852m High Deleting usage log file 'D:\SHRPT_UsageDataLogs\SHAREPOINTSER1-20110204-1421.usage' after data import. 03e6edfd-f852-4fa5-ae5a-04ae9bacc51c
02/04/2011 14:30:06.25 w3wp.exe (0x1154) 0x1098 SharePoint Foundation Unified Logging Service b8fx High ULS Init Completed (w3wp.exe, onetnative.dll)
sorry for duming more logs ..hoping if this insights anything?
Thanks.

Web Services Not Working because wwv_flow_collections view is empty

Hello,
I followed this example to try and get a web service running in my Application:
http://apex.oracle.com/i/doc/advnc_rest_web_eg_2.htm
When I run the page and enter the zip code 43221 they recommend with a radius of 5, I get no results. When debugging and throwing the query into SQL Dev, I have no records in my wwv_flow_collections view. Looking at the tables that comprise the view, wwv_flow_collections$ and wwv_flow_collection_members$, these two tables would join on c.id = m.collection_id alone, but there are additional in-line selects involving the DUAL table that make the query return 0 records and therefore the view is empty. I've never messed with these views/tables, are these auto-populated by APEX? Can they be updated? Right now I cannot get any web services to work because of this. Here is the from clause for the wwv_flow_collections view:
FROM
wwv_flow_collections$ c,
wwv_flow_collection_members$ m
WHERE
c.session_id =
SELECT
v('SESSION')
FROM
dual
AND c.security_group_id =
SELECT
wwv_flow.get_sgid
FROM
dual
AND c.id = m.collection_id
AND c.flow_id =
SELECT
nv('FLOW_ID')
FROM
dual
Can anyone help? Thanks in advance!
John

John,
I have been working this week to set up the exact same thing and got the same empty result set that you have. In this case I believe it has nothing to do with APEX. I downloaded soapUI 4.0.1 which tests web services and used the WSDL described in the APEX Webservices tutorial for http://www.ignyte.com/webservices/ignyte.whatsshowing.webservice/moviefunctions.asmx?wsdl to create the same sample requests. It also returns no results.
So, I decided to use a different public WSDL and try to get it working. Here are my steps taken below:
BACKGROUND:
- I am using APEX 4.0 on an 11gR2 database, with ACLS set up for the APEX schema this app is using.
- First off, the site I used I just found through google. It is a currency conversion rate webservice. It is explained here: http://www.webservicex.net/CurrencyConvertor.asmx
- The WSDL is found here: http://www.webservicex.net/CurrencyConvertor.asmx?WSDL
SETTING UP THE WEBSERVICE:
1. In a new APEX application I went to "*Shared Components*" -> "*Web Service References*" -> "*Create*" to create a new web service reference
2. Selected manual
3. Called the webservice CURRENCY_TEST
4. Set the URL to http://www.webservicex.net/CurrencyConvertor.asmx
5. Set the Action to http://www.webserviceX.NET/ConversionRate (Action can be found in the WSDL - showing a few lines below)
<pre class="jive-pre">
<wsdl:binding name="CurrencyConvertorSoap" type="tns:CurrencyConvertorSoap">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="ConversionRate">
<soap:operation soapAction="*http://www.webserviceX.NET/ConversionRate*" style="document"/>
<wsdl:input>
<soap:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
</pre>
6. WSDL explains that the version is *1.1* in this case. (However, this same WSDL has the same operation for 1.2 so it probably would work)
7. No Authentication
8. soapUI 4.0.1 gave me the soap request which in this case is the following:
<pre class="jive-pre">
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:web="http://www.webserviceX.NET/">
<soapenv:Header/>
<soapenv:Body>
<web:ConversionRate>
<web:FromCurrency>#FROM_CURRENCY#</web:FromCurrency>
<web:ToCurrency>#TO_CURRENCY#</web:ToCurrency>
</web:ConversionRate>
</soapenv:Body>
</soapenv:Envelope>
</pre>
9. Stored response in collection CURRENCY_COLLECTION
10. Saved my web service reference
11. Test the web service reference (you have to be on the web service references page and instead of the icon view of the report, use the list view. Click on the test icon to test the web service)
12. On the test page, change #FROM_CURRENCY# to USD (for US dollars) and #TO_CURRENCY# to EUR (Euros)
13. Click the test button and you should see a valid soap response with a currency rate within the ConversionRateResult tags
USING THE WEBSERVICE AND GETTING RESULTS:
1. Went back to the application and hit "*Create Page*" -> "*Form*" -> "*Form and Report on Web Service*"
2. Selected my CURRENCY_TEST web service reference
3. Next on the next page
4. For input parameters, left the defaults to create 2 inputs, From_Currency and To_Currency
5. Soap Style for this is Document (found in the WSDL as an attribute just after the soapAction attribute in the WSDL snippet above)
6. Message Format is Literal (Also found above in the wsdl:output for this operation under the use attribute)
7. XPATH is a bit complicated. In this case put */ConversionRateResponse* (I used the soapUI 4.0.1 to send the request and get back the soap response to see what the response tags would include and which path I'm going to)
8. Message Namespace is http://www.webserviceX.NET/ (which is also found in the response soap message - I'd really recommend a tool to test this outside of APEX)
9. For Parameter Names there is only one and it is ConversionRateResult (also found in the response soap message)
10. Finish and run the report.
OTHER GOTCHAS:
So I finally got this to work, but in my case I was querying a remedy webservice and the xml tags I get back are all xmlns:ns0 and all response tags prefaced with ns0:
In this case I had to after using the wizard go back and edit my query to change xmlns to xmlns:ns0 since the builder only assumes xmlns.
<pre class="jive-pre">
select extractValue(value(t),'/*/ns0:Assigned_Group','xmlns:ns0="urn:HPD_IncidentInterface_WS"') "Assigned_Group"
, extractValue(value(t),'/*/ns0:Assignee','xmlns:ns0="urn:HPD_IncidentInterface_WS"') "Assignee"
, extractValue(value(t),'/*/ns0:Resolution','xmlns:ns0="urn:HPD_IncidentInterface_WS"') "Resolution"
, extractValue(value(t),'/*/ns0:Status','xmlns:ns0="urn:HPD_IncidentInterface_WS"') "Status"
from wwv_flow_collections c,
table(xmlsequence(extract(c.xmltype001,'//ns0:HelpDesk_Query_ServiceResponse','xmlns:ns0="urn:HPD_IncidentInterface_WS"'))) t
where c.collection_name = 'INCIDENT_TEST'
</pre>
Good Luck!
Jonathon

How can I get my web cam to work in Adobe Connect ?

This is actually an end user's question that I am having trouble answering to...
We use Adobe Connect to give online language classes, the end user is one of the students.
I cannot find the right Support answer to give him.
Problem:
My camera does not work when I connect to Adobe's rooms but camera works fine with other software.
Even though I suspected my old camera was working fine, yesterday I went ahead and bought a new camera.
I thought perhaps my webcam software may have been a problem, so I bought a different type camera with different software.
Even after removing all the old software, same result:
I surmised the problem might be caused by my firewall and security software, so once I tried changing the permissions for Adobe, and my Webcam, but that didn’t work.
Another time, I restarted my computer right before class and then turned off my firewall completely so there would be no interference but to no avail. I’m totally perplexed.
Isn’t there anyone else experiencing a similar problem?   Has anyone else found a solution?
I run Windows Vista with McAfee Internet Security Software. I always reboot the computer before class and open no other programs other than Google Chrome.
I now have a brand new Microsoft LifeCam Cinema Camera with LifeCam 3.5 Webcam Software.
I test my camera before going online. It always works fine.   Then I shut down the camera program and login into class.
When I “connect webcam” in the room, the light on my camera comes on (suggesting that it is ON), but only a black image is transmitted to the room.

Check to see if you have Google Voice installed. If so, remove it and see
if your problem vanishes. If not Google Voice, check to see if you have
any other communications software which interacts with your cam and
disable it. This was the problem I had with a similar problem on a Mac.
MosesJOI <[email protected]>
10/13/11 12:08 PM
Please respond to
[email protected]
To
jsb152 <[email protected]>
cc
Subject
How can I get my web cam to work in Adobe Connect ?
Re: How can I get my web cam to work in Adobe Connect ?
created by MosesJOI in General Discussion - View the full discussion
Thanks a lot Heyward for the swift reply !
I sent the advice out to the end user, but unfortunately this wasn't the
solution.
His reply is below :-
The default resolution of my new camera is already set at 640x360, but I
went ahead and tried several lower resolutions (e.g. 424x240; 320x240; and
160x120) but none worked in the room - camera still showed up as black
blank screen. Also, as far as I can tell, I don’t have the option of
adjusting the frame rate.
I started playing around with my Internet Security Settings to see if they
might be playing a role. So far, all to no avail.
Hmm...quite a tricky one - webcams always are - maybe if he can find a way
to adjust the frame rate (?).
He's going to fiddle about with the settings a bit more and see if
something does the trick.
If anyone has had a similar problem and found an ingenious solution,
please jot on a note on this thread.
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/3969561#3969561]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/3969561#3969561]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in General Discussion by email or at Adobe Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.

Web gallery not working

Can't seem to get my web galleries to work. i end up with a white screen. The look fine in preview and in dreamweaver but not when i actually load them to my site. I have an older one web gallery that still works. here is a sample problem page http://anaphoria.com/test/index.html. still on cs5

What version of iPhoto are you running? If you're still at 7.0 then that's probably the reason. Update to the latest, 7.0.2 and try again.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Some web sites not working in FF but they are OK in Safari.

A couple of times lately I have had web sites not work correctly with Firefox. I need to switch to Safari to complete the tasks I needed to do. My FF is running on Mountain Lion and is up to date.
Thanks,
MJT

Hello michaeljt, the sites you have problem, is it with a lot of flash content ?
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Please reload the webpage while bypassing the cache using '''one''' of the following steps:
*Hold down the ''Shift'' key and click the ''Reload'' button with the left mouse key.
OR
*Press ''Ctrl'' + ''F5'' or ''Ctrl'' + ''Shift'' + ''R'' (Windows and Linux)
*Press ''Command'' + ''Shift'' + ''R'' (Mac)
See if this helps solve the issues you had and please report back to us!
thank you

Abap 703 trial - can't configure web dynpro to work - reverting back to 702

Hi there
whatever I do I can't get Web dynpro to work in ABAP 703 trial -- WDY compiles etc - but always get IE explorer cannot find page when I try and run the WDY, -- I've activated all the SICF services and done the profile changes (RZ10) but still no good.
I've gone back to Abap 702 version which DOES work (even on W8 X-64)
The main reason for downloading this was to test and play around with Web Dynpro -- I'm past basic ABAP and OO stage !!!
If anybody has got Web dynpro in the 703 trial working PLEASE POST what you did.
Also there doesn't seem to be any software for manipulating the database (or adding volumes) like there was in the 702 release (DBM76.EXE). The documentation says use DB studio -- but WHAT do you do --there's no connect to the SAP DB.
I'm afraid even by SAP's OWN standards of documentation ||(usually if it exists is very obtuse) this trial version must take the record for "Helpful and relevant documentation:".
If you want to experiment with Web dynpro the documentation on how to set it up is fine for the 702 release so I suggest you stick to that until someon has worked it out for 7.03
Cheers

Hi Alexander,
Thanks for sharing the solution , I did all the steps mentioned in the link http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30129979-011c-2e10-fb9b-a60e0d704c1d?QuickLink=index&…
The option mentioned by you was the only additional thing missing
Trial version : ABAP 703 64 bit.

Call Oracle Help for Java in Oracle forms running in the web

Hi, everyone,
We are developing a web-enabled Oracle database application
system. Oracle suggested us to use Oracle Help for Java(OHJ) to
create an online help system for the web environment. We
successfully created a OHJ program which can be independently.
But we still have no idea how to call this OHJ program from the
forms running in the web environment.
Could anyone help us out?
Thanks.
null

I would like to know if anyone has been able to do this too. Could someone respond if they have successfully gotten this to work?
Thanks!!

Run Time Engine Web Service

Hello Gents, Anybody knows why I can't access to VI (*.exe) on remote PC. On remote PC has been installed only standard 8.6 Run Time Engine. Do I need to install additional parts like NI LabVIEW Run-Time Engine Web Server or/and LV Web Server? And is it possible to communicate through this using RTE on both sites?
Solved!
Go to Solution.

Sure, with LabVIEW installed it works properly. But questions is "how I can to view VI interface on PC with RTE installed via Web browser in case when this VI has been uploaded on this PC?".
It is mean that we are using Web Server for this. Are you sure standard LabVIEW Run-Time Engine contains this? And as I’m understood I need to copy *.html files to somewhere…. on this PC? Thank you for support and advices

Problem running report in web layout

Hi
I have a problem of running my report in web layout.
If i run the report in web layout it does not show the changes that i made to it , the colors and text sizes and styles, if I used no templates and changed the report manually it will just show the report as before it was modified.
But when I run it in paper layout every works fine.
Any ideas about what I'm doing wrong?
Thanks

Also I tested with the sample Report Test.rdf (Comes along with installation).
Even that runs well in Paper Layout and report hangs when run in Web Lay out.
Please help me with your valuable inputs on this regard.
Thanks and Regards,

[12.1.1] Can't get web interface to work.

Hello,
This isn't a fresh install of EBS per se, but it isn't a production EBS system or anything like that. So it was originally installed in December or so, but we haven't really touched it since then. The only thing we use this server for is testing EBS functionality offered by our product. The point in telling you this is that I don't think the web interface ever worked, but since the application seems to be working fine, we never had a reason to fix it until now.
Today I'm trying to schedule some concurrent programs in EBS. Basically, I'm just looking to find out a bit about the concurrent manager scheduling options and how schedules are stored in the DB. As far as I know the only way to do this (schedule a conc. program to run, say, once a day) is through the web interface. If there's another way, I would love to hear it because I don't particularly care that the web interface isn't working besides the fact that I want to schedule a test concurrent program.
Note that I can't access the interface on the EBS box itself either.
Here are my request details:
GET http://oracleebs.advsyscon.com:8000/OA_HTML/AppsLogin HTTP/1.1
Accept: text/html, application/xhtml+xml, */*
Accept-Language: en-US
User-Agent: Mozilla/5.0 (compatible; MSIE 10.0; Windows NT 6.1; WOW64; Trident/6.0)
Accept-Encoding: gzip, deflate
Host: oracleebs.advsyscon.com:8000
DNT: 1
Connection: Keep-Alive
Cookie: oracle.uix=0^^GMT-5:00^p; __utma=252711254.678514999.1359557956.1359557956.1359557956.1; __kti=1306523819047,http%3A%2F%2Fwww.advsyscon.com%2F,; __ktv=f42d-f27d-cd94-651813032e35c2e; __hstc=252711254.fd397c917966433ca3ad39f9002e7bb0.1359557960441.1359557960441.1359557960441.2; hubspotutk=fd397c917966433ca3ad39f9002e7bb0
Here is the response I get:
HTTP/1.1 500 Internal Server Error
Date: Fri, 09 Aug 2013 14:49:57 GMT
Server: Oracle-Application-Server-10g/10.1.3.4.0 Oracle-HTTP-Server
Content-Length: 304
Connection: close
Content-Type: text/html
<HTML><HEAD><TITLE>500 Internal Server Error</TITLE></HEAD><BODY><H1>500 Internal Server Error</H1><PRE>Servlet error: An exception occurred. The current application deployment descriptors do not allow for including it in this response. Please consult the application log for details.</PRE></BODY></HTML>
This causes IE to give me a message like "The website cannot display the page. Most likely causes: The website is under maintenance. The website has a programming error."
"uname -a" on the EBS server:
Linux OracleEbs.domain.com 2.6.18-238.el5 #1 SMP Sun Dec 19 14:22:44 EST 2010 x86_64 x86_64 x86_64 GNU/Linux
AKA, this is a RedHat 5 system.
I tried looking at the error_log in Apache/Apache/logs, but it didn't seem to show anything (and it was from like, December 19).
Any ideas as to how to troubleshoot or fix this?
Thank you!

Hi,
I'm just looking to find out a bit about the concurrent manager scheduling options and how schedules are stored in the DB. As far as I know the only way to do this (schedule a conc. program to run, say, once a day) is through the web interface. If there's another way, I would love to hear it because I don't particularly care that the web interface isn't working besides the fact that I want to schedule a test concurrent program.
Yes, you may schedule concurrent request from backend sql/plsql and this has been discussed in forum many a time, please refer:
https://forums.oracle.com/search.jspa?view=content&resultTypes=&dateRange=all&q=concurrent+request+backend&rankBy=relevance&contentType=all&containerType=&container=&containerName=&userID=&numResults=15
Also:
https://forums.oracle.com/thread/2160246
Hope this helps!
Best Regards,

Minimum services to run remote desktop web connection?

While I recognize that installing anything to do with terminal services or RDS on a domain controller is not recommended it is my only choice for a very small business that I'm helping out. They have Server 2008 R2 and all they want to be able to do is
have a couple of people remote in to their own computers when out of the office. What services are the simplest way to accomplish this? I can't find an answer to something this minimalist anywhere.

Hi Jim,
For your issue regarding double prompt, suggest you to enable RD Web SSO for your case; where we need to enter username and password once. In order for Web SSO to work:
a. The connection in RemoteApp and Desktop Connections must have an ID. By default, it is set to the Fully Qualified Domain Name (FQDN) of the RD Connection Broker server in case of RD Connection Broker mode. In RD Session mode, it is set to the FQDN of
the RD Web Access server.
b. RemoteApp programs must be digitally signed using a Server Authentication certificate [Secure Sockets Layer (SSL) certificate].
c. Client operating systems must trust the certificate with which the RemoteApp programs are signed.
You can refer the following article for information.
Introducing Web Single Sign-On for RemoteApp and Desktop Connections
http://blogs.msdn.com/b/rds/archive/2009/08/11/introducing-web-single-sign-on-for-remoteapp-and-desktop-connections.aspx
In regards to your error, we need to have required port open to make successful connection. Need to bind port 443 for RD Web and RD Gateway successful connection. Also need to have proper certificate.
Addition something might have happened to your IIS settings and more specifically to your Default Application pool. For example if you install some third-party web application, it may have changed the 32/64 bit feature on your Application pool. So please check
below points.
1) Go to IIS -> Application Pools -> DefaultAppPool -> Advanced Settings -> Enalbe 32-Bit Application - > if it's True , change it to False
2) Check other relevant application pools for the same setting - > SBS Web Workplace AppPool or SBS Web Applications application pool
All of the pools should run with Enable 32-Bit - False
More information.
This computer can't connect to the remote computer because the Terminal Services Gateway server is temporarily unavailable
https://support.microsoft.com/en-us/kb/969743
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected].

PROBLEMS IN RUNNING FORM ON WEB

HELLO ALL
I AM DEPLOYING FORMS ON WEB. I AM USING FORM 5. I HAVE MANAGED
TO DEPLOY AND RUN FORM ON WEB, BUT I AM HAVING COUPLE OF
PROBLEMS AND QUESTIONS.
1. MY FORMS ARE RUNNING AS AN APPLET. HOW CAN I RUN IT WITHIN
BROWSER?
2. IF MY CANVAS IS BIGGER THEN BROWSER WINDOWS SIZE WILL SCROLL
BAR WORK?
3. WILL I BE ABLE TO USE CUSTOM MENU AND CALL OTHER FORMS?
4. HOW CAN I USE FORMS STANDARD FUNCTION KEYS (F7, F8 ETC.)?
THANKS

1. In your HTML startup file add <PARAM NAME="separateFrame"
VALUE="false">
4. Create a keyboard mapping (.res) file with function keys and
modify your startup HTML file, e.g.:
<PARAM NAME="serverArgs" VALUE="module=logon.fmx
term=c:\forms\mykeys.res>

Running 9i on web dowsn't work

Similar Messages

Maybe you are looking for