Running ABAP Web Dynpro Application without host entry of web server

Hi All,
I am trying to run a web dynpro application, its working fine when I have done host entry (host nam.domain.extension) of web server.
But when I remove this entry from host file it not runs.
Can you tell me the posibility of running this application without host entry? Based on this possibility I have to proceed my work. Please guide me.
Thanks and Regards
Sudhir Gupta

Hi Sudhir ,
See the below link , its necessary to provide FQDN.
http://help.sap.com/saphelp_nw70/helpdata/en/67/be9442572e1231e10000000a1550b0/frameset.htm
Regards
Yash

Similar Messages

Web Dynpro Application URL Host Name Not Correct

Hello,
I am developing a web dynpro application in our development system but when I activate the application it gets a URL that points to our test system. When I test the application in HTTP Service (SICF) the URL for the development system is passed to the browser. WHere do you maintain the host that is being used to build the URL for the web dynpro application when it is activated.
Thanks,
Jim N.

Hello,
To configure the FQDN (host name full), please take a look at these:
[http://help.sap.com/saphelp_nw2004s/helpdata/en/67/be9442572e1231e10000000a1550b0/content.htm] and
[http://help.sap.com/saphelp_nw2004s/helpdata/en/43/e86de5008b4d9ae10000000a155369/frameset.htm].
Regards,

Web Dynpro Application URL

Hi All,
I need to run a Web Dynpro application without using Portal, is there a was to do so? Can I run the application by calling it directly using a URL?
Thanks,
Rajiv

Hi,
you can. simply right click on your Web dynpro application and selecte deploy and run.
other wise use this url to run
http://hostname:portnumber/webdynpro/dispatcher/local/projename/wpplication name
Regards,
Naga

Source code for "Creating an Extended Web Dynpro Application"?

Hello!
I'm a rookie in the field of SAP Netweaver and I'm justing getting started with some tutorials. My problems with "Creating an Extended Web Dynpro Application" are to massive to be posted on this forum in this stage. What I want to have some help with is to find the source code for that tutorial so I can get som guidence from there.
Following text is cut out of this page:
http://help.sap.com/saphelp_nw70/helpdata/EN/5d/f42fef2eec724597a03b6bcc670c2c/frameset.htm
Creating an Extended Web Dynpro Application
You can download the Web Dynpro project for the current tutorial from the Software Developer Network SDN (http://sdn.sap.com -> Web Application Server -> Web Dynpro -> Sample Applications and Tutorials) in two versions: one skeleton version you can use for exercises and one final version (solution) for an immediate build, deployment and run on the Java engine of the SAP Web Application Server.
How hard I try I can't find the specific source code on sdn.sap.com
Does anyone have a clue where it is?
Thanks!
Best regards
/Johan Månsson Lindströ

Hi!
I did what you said but I seem to miss the IDE folder. This is what it looks in my Explorer
C: > Program Files > SAP > IDE > CE > eclipse > (no folder called "examples")
I also did a search in this eclipse folder for "examples" but I did'nt find the example I'm looking for
I am running a newer version of NWDS:
SAP NetWeaver Developer Studio
SAP NetWeaver 7.1 Composition Environment SP03 PAT0000
Maybe that's why things don't look the same?

How do i pass parameters to a web dynpro application ?

Hi all,
how do i best possible pass (serverspecific) parameters to a web dynpro application ?
i wrote a web dynpro application that, among other things, sends an email and stores files on a server directory. Therefor i need parameters like e.g. "mailhost" or "directory".
The way i chose is to make a *.properties file. But from my point of view there are some disadvantages.
1) When i deploy the WD App to a new server, i have to edit the properties file before. I don't know how to do that. Do i have to edit the *.properties file again, before i make a new ear-Archive with NWDS ?
2) When the properties a wrong or change for a deployed app, i have to restart the J2EE Engine. Thats not convenient for a production server.
Is there a better way ?
Thanks
Andreas
(And I promise to return and reward the answers)

Hi Andreas,
You can't use something like portalapp.xml because this is not supported by webdynpro, but ... you can add this parameters at the end off the webdynpro address line. like http://<host>:<port>/webdynpro/dispatcher/local/<Webdynproproject>/<webdynproApplication>?host=yourhost
In your application you can get these variables:
String host = WDWebContextAdapter.getWebContextAdapter().getRequestParameter("host");
when you create a webdynpro iview you can specify the default value for the variables in the URL in the properties of the iview and i think you can personalize them later.
kind regards,
Joachim

Error - Creating a Web Dynpro Application Accessing ABAP Functions

Dear All,
we are trying to implement a web dynpro application with accessing ABAP functions.
Previous tasks:
-     insert the ABAP system into the SLD from the NWDI System (Transaction RZ70; the ABAP system is correctly insert into the SLD => technical systems)
-     equipped the JCO connections with the web dynpro content manager (ping and test = OK)
Its the standard tutorial out of the SDN called Creating a Web Dynpro Application Accessing ABAP Functions.
Some hints:
-     There are no errors after the implementation and the rebuild of the project in the NWDS
-     The auto deployment works fine to the development runtime system. The application is shown in the Web Dynpro content manager
-     The In the build log I found these entries:
System.err] [Invoked from com.sap.s2x.tools.GUID.getnodeaddress(GUID.java:585)]
[System.err] java.net.UnknownHostException: FRASAPP562: FRASAPP562
[System.err]      at java.net.InetAddress.getLocalHost(InetAddress.java:1191)
[System.err]      at com.sap.s2x.tools.GUID.getnodeaddress(GUID.java:575)
[System.err]      at com.sap.s2x.tools.GUID.<clinit>(GUID.java:179)
[System.err]      at com.sap.s2x.tools.S2XGUID.getGUID(S2XGUID.java:19)
[System.err]      at com.sap.ide.metamodel.core.i18n.LanguageState.createS2XID(LanguageState.java:191)
[System.err]      at com.sap.ide.metamodel.core.i18n.S2XLanguageUnmarshaller.unmarshal(S2XLanguageUnmarshaller.java:52)
[System.err]      at com.sap.ide.metamodel.core.i18n.TextPoolProxy.loadLanguageState(TextPoolProxy.java:703)
[System.err]      at com.sap.ide.metamodel.core.i18n.TextPoolProxy.prepareLanguageForRead(TextPoolProxy.java:646)
[System.err]      at com.sap.ide.metamodel.core.i18n.TextPoolProxy.isEmpty(TextPoolProxy.java:222)
[System.err]      at com.sap.ide.webdynpro.checklayer.MDOChecker.check(MDOChecker.java:23)
[System.err]      at com.sap.ide.webdynpro.checklayer.view.ViewChecker.check(ViewChecker.java:52)
[System.err]      at com.sap.ide.webdynpro.checklayer.controller.ViewControllerChecker.check(ViewControllerChecker.java:96)
[System.err]      at com.sap.ide.webdynpro.checklayer.controller.ControllerChecker.check(ControllerChecker.java:119)
[System.err]      at com.sap.ide.webdynpro.checklayer.controller.ControllerChecker.check(ControllerChecker.java:56)
[System.err]      at com.sap.ide.webdynpro.checklayer.component.ComponentChecker.check(ComponentChecker.java:181)
[System.err]      at com.sap.ide.webdynpro.checklayer.component.ComponentChecker.check(ComponentChecker.java:56)
[System.err]      at com.sap.ide.webdynpro.generation.Generation.check(Generation.java:2039)
[System.err]      at com.sap.ide.webdynpro.generation.Generation.generatePersistentComponent(Generation.java:1296)
[System.err]      at com.sap.ide.webdynpro.generation.console.GenerationConsole.generate(GenerationConsole.java:175)
[System.err]      at com.sap.webdynpro.generation.ant.GenerationAnt.main(GenerationAnt.java:50)
[System.err]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[System.err]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[System.err]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[System.err]      at java.lang.reflect.Method.invoke(Method.java:324)
[System.err]      at com.sap.webdynpro.generation.ant.WDGenAntTask.execute(WDGenAntTask.java:219)
[System.err]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
[System.err]      at org.apache.tools.ant.Task.perform(Task.java:364)
[System.err]      at org.apache.tools.ant.Target.execute(Target.java:341)
[System.err]      at org.apache.tools.ant.Target.performTasks(Target.java:369)
[System.err]      at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
[System.err]      at com.sap.tc.buildplugin.techdev.ant.util.AntRunner.run(AntRunner.java:112)
[System.err]      at com.sap.tc.buildplugin.DefaultAntBuildAction.execute(DefaultAntBuildAction.java:61)
[System.err]      at com.sap.tc.buildplugin.DefaultPlugin.handleBuildStepSequence(DefaultPlugin.java:213)
[System.err]      at com.sap.tc.buildplugin.DefaultPlugin.performBuild(DefaultPlugin.java:190)
[System.err]      at com.sap.tc.buildplugin.DefaultPluginV3Delegate$BuildRequestHandler.handle(DefaultPluginV3Delegate.java:66)
[System.err]      at com.sap.tc.buildplugin.DefaultPluginV3Delegate.requestV3(DefaultPluginV3Delegate.java:48)
[System.err]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[System.err]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[System.err]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[System.err]      at java.lang.reflect.Method.invoke(Method.java:324)
[System.err]      at com.sap.tc.buildtool.v2.impl.PluginHandler2.maybeInvoke(PluginHandler2.java:350)
[System.err]      at com.sap.tc.buildtool.v2.impl.PluginHandler2.request(PluginHandler2.java:102)
[System.err]      at com.sap.tc.buildtool.v2.impl.PluginHandler2.build(PluginHandler2.java:76)
[System.err]      at com.sap.tc.buildtool.PluginHandler2Wrapper.execute(PluginHandler2Wrapper.java:58)
[System.err]      at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1723)
[System.err]      at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1495)
[System.err]      at com.sap.tc.buildcontroller.CBSBuildController.build(CBSBuildController.java:727)
[System.err]      at com.sap.tc.buildcontroller.CBSBuildController.execCommand(CBSBuildController.java:503)
[System.err]      at com.sap.tc.buildcontroller.CBSBuildController.evalCmdLine(CBSBuildController.java:442)
[System.err]      at com.sap.tc.buildcontroller.CBSBuildController.run(CBSBuildController.java:314)
[System.err]      at com.sap.tc.buildcontroller.CBSBuildController.exec(CBSBuildController.java:252)
[System.err]      at com.sap.tc.buildcontroller.CBSBuildController.mainLoop(CBSBuildController.java:207)
-     Im able to start the application out of the Web Dynpro content manager with run => only the user interface is displayed without any functionality
-     The normal start over the NWDS fails => error text
com.sap.tc.webdynpro.services.sal.core.DispatcherException: The requested deployable object 'local/J08_Flugdat_Daventdcflight~xxx.com' and application 'FlightListApp' are not deployed on the server. Please check the used URL for typos.
There two different URLs in use.
Start via NWDS:
http://frasapp562:50000/webdynpro/dispatcher/J08_Flugdat_Daventdcflight~xxx.com/FlightListApp
Start via web dynpro content manager:
http://frasapp562:50000/webdynpro/dispatcher/xxx.com/aventdc~flight/FlightListApp
For test purposes, we started the BAPI (BAPI_Flight_Getlist) on the ABAP system directly. It works.
Any ideas about the system behaviours (different URLs and missing functionality)?
Thanks a lot in advanced!
Best regards
Christoph

The Error has been solved The implementation of a method was missing....
Thx
Christoph

Not able to run web dynpro application from portal.

Hi portal experts,
I want to run my web dynpro application from portal.
So created a seperate iview and a role for the purpose.
Assigned the iview to the role and also mapped a abap user id to the new role created.
But when I click on 'preview' the iview , getting the following dump.
Error when processing your request
What has happened?
The URL http://mnghcmsap:8000/sap/bc/webdynpro/sap/zhr_cp_admin/ was not called due to an error.
Note
The following error text was processed in the system HRM : Die URL enthält keine vollständige Domainangabe (mnghcmsap statt mnghcmsap.<domain>.<ext>).
The error occurred on the application server mnghcmsap_HRM_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: CHECK of program CX_FQDN=======================CP
Method: STARTUP_CHECKS of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: HANDLE_REQUEST of program CL_WDR_CLIENT_ABSTRACT_HTTP===CP
Method: IF_HTTP_EXTENSION~HANDLE_REQUEST of program CL_WDR_MAIN_TASK==============CP
Method: EXECUTE_REQUEST of program CL_HTTP_SERVER================CP
Function: HTTP_DISPATCH_REQUEST of program SAPLHTTP_RUNTIME
Module: %_HTTP_START of program SAPMHTTP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system HRM in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server mnghcmsap_HRM_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server mnghcmsap_HRM_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 200 -u: INF51515 -l: E -s: HRM -i: mnghcmsap_HRM_00 -w: 0 -d: 20110209 -t: 121224 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Please let me know if I am doing the process correctly and also let me know if I am missing somthing.
Thanks,
Aditya.

Are you able to run teh web dynpro application independtly i.e. without creatin an iview.
http://mnghcmsap:8000/sap/bc/webdynpro/sap/zhr_cp_admin/ by using this link.
or there also you are getting the error.
i guess there also you should be gettign the error.
this is some problem with the FQDN settings in the abap system.
in the host name of the web dynpro applciation server one .(dot) is must.
so you might have to change the host name to some thing like mnghcmsap. from mnghcmsap
thanks
sarbjeet singh

HTTP 500 internal server error while starting abap web dynpro application

Hi there,
i have some problems concerning my web dynpro abap configurations in the system. When i start an application the browser appears and displays the http 500 internal server error. The required icf nodes are activated, as far as i know. the following properties are set:
hostname: aet
port: 8000
The generated url for the web dynpro application looks as follows:
http://aet.ls3001:8000/sap/bc/webdynpro/sap/zwdr_test?sap-language=EN
Maybe anybody of you out there has an idea for that situation.
Thanks for your afford and kind regards,
Albert

Hi Ulli,
the error message says:
UNKNOWN HOST
Description: Unable to locate the server named "aet.ls3001" --- the server does not have a DNS entry. Perhaps there is a misspelling in the server name, or the server no longer exists. Double-check the name and try again.
So the problem is the hostname.
When i replace the hostname with the ip of the server, the following error occures:
COULD NOT CONNECT
Description: Could not connect to the server "10.18.187.9".
But with SAPLogon, its possible to connect on the server by filling in the ip adress.
Kind regards,
Albert

Call a ABAP Web-Dynpro-application via a BSP-Application

We have a BSP-Framework, that call several applications among other things other BSP-Applications, ITS-Application and other systems. Now I want to integrate a ABAP Web Dynpro-Application.
For the moment I can call the ABAP Web Dynpro-Application from our application.
This application runs in the same session as the Framework (verify in transaction sm04).
When I want to call another application in the Framework, the session will be killed (no more sessions in sm04). This happens also, when I want to call the ABAP Web Dynpro-Application a second time.
I guess, that the ABAP-Framework thinks I want to go outside the system (for example www.google.de) and close the session. I found out, that this wouldn't happen, if the application were suspended. But I found no way to tell the application via a url-parameter to suspend.
Can someone help me?

Thx for the tip,
but I can't firea suspend plug. Because I'm in BSP. I understand the docu so, that you have the option to call a other apllication like BSP from a ABAP Web Dynpro.
I want to call the ABAP Web Dynpro form BSP like this way.
1. Start BSP-Framework
2. Call ABAP Web-Dynpro-Application from BSP
3. Call another Application from BSP without automatically logout by unload ABAP Web Dynpro. (I have a chance to call the ABAP Web Dynpro again via url to suspend before I call the other app.)
Regards Stefanie

ABAP Web Dynpro Application changes in Administation Mode no longer working

Hi Gurus,
To apply customizing to a standard SAP Web Dynpro application we used to simply run the application in administration mode. After we changed a parameter to allow for theme application this adminstration mode no longer works. Right-Click simply acts as if you are running the application normally. We have tried to remove our parameter but this had no effect.
How can we "fix" this error without creating a new custom configuration which will cause the URL to change?
Thanks,
Garth

Hi,
how did you open in administrative mode?
to open in adminstrative mode do as follows:
In se80 ,i.e in the menu bar:
Web Dynpro Application->Test->Test in Administation mode.
i hope u can see the option "Settings for surrent config" .
you can refer the thread.
[Re: ABAP Web Dynpro Application changes in Administation mode]
Priya.

Error while accesing ABAP web dynpro application

Hi Experts,
We are getting warning symbol on web page status bar, when we are accessing the ABAP web dynpro application
only first page of application is getting loaded and when we click on page it is showing error on status bar and we can perform any thing.
once we double click on warning icon,
below details are coming:
Line: 1491
Char: 3
Error: Object Expected
Code: 0
URL: url of the ABAP web dynpro application
This scenario is occuring for many ABAP WD application for a client.
Please guide how to solve this issue?
Thanks!
Piyush

Hi
First try a very simple application with nothing in it just one text saying Hello World
Run it and see what happens.
Also check if your url uses FQDN name. something like https:
company.name.co:50000\.......
If you do not use the FQDN it will always show a script error on the bottom and some functions will not work e.g
dropdowns.
regards
Yuval.

Convert JAVA Web Dynpro to ABAP Web Dynpro application

Hi,
I was hoping someone could tell me if there is a way to port a JAVA Web Dynpro application to ABAP Web Dynpro. We have some JAVA WD apps that would now make more sense to have running on our ABAP system so we would like to convert them to ABAP WD apps.
I know the theory is that WD is metadata/XML based so it should be possible to port the WD definition to ABAP and have the ABAP runtime generate the application again in ABAP. I expect that any custom code that is written in JAVA would need to be manually rewritten in ABAP - but it would be great if there was tool or method to at least port the majority of the application.
Thanks in advance for your help,
Simon

Hi Simon
You are correct in thinking that all WD apps are based on metadata, but unfortunately, the similarity between WD Java and WD ABAP is just a conceptual one, and no such tool exists to convert one to the other.
In addition to this, there are certain implementation differences between ABAP and Java that mean you could not convert one to the other. For instance, the whole concept of model objects does not exist in WD ABAP. Therefore, structural entities used in WD Java such as model components could not be tranlsated into anything that exists in ABAP, because the concept is redundant in the target language.
Sorry about that, but Java and ABAP are sufficiently different beasts that such a tool is not possible.
Regards
Chris W

Last step of ".... web dynpro application accesing ABAP functions" FAILED

Hello!!!
I can't run my app (Example: Creating a web dynpro application accessing ABAP functions).
I will be very grateful if someone tell me what is happening. While I'm developing I can connect to my was 6.20 to see de BAPI and other stuff, to use on my program, but once I deploy the app and try to test it... this is what it drops:
Error stacktrace:
com.sap.tc.webdynpro.services.exceptions.WDTypeNotFoundException: type extern:com.sap.test.flights.model.types.FlightsModel:com.sap.test.flights.model.types.Bapisfldst could not be loaded: com.sap.dictionary.runtime.DdException:
     at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getStructure(DataTypeBroker.java:297)
     at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:753)
     at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:761)
     at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:761)
     at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
     at com.sap.tc.webdynpro.progmodel.controller.Component.getCustomControllerInternal(Component.java:433)
     at com.sap.tc.webdynpro.progmodel.controller.Component.getMappableContext(Component.java:371)
     at com.sap.tc.webdynpro.progmodel.controller.Component.getMappableContext(Component.java:400)
     at com.sap.tc.webdynpro.progmodel.context.MappingInfo.init(MappingInfo.java:138)
     at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:746)
     at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:761)
     at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:540)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bind(ViewManager.java:398)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.getView(ViewManager.java:555)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.bindRoot(ViewManager.java:422)
     at com.sap.tc.webdynpro.progmodel.view.ViewManager.init(ViewManager.java:130)
     at com.sap.tc.webdynpro.progmodel.view.InterfaceView.initController(InterfaceView.java:41)
     at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
     at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.displayToplevelComponent(ClientComponent.java:134)
     at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:374)
     at com.sap.tc.webdynpro.clientserver.task.WebDynproMainTask.execute(WebDynproMainTask.java:593)
     at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:59)
     at com.sap.tc.webdynpro.clientserver.cal.ClientManager.doProcessing(ClientManager.java:249)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doWebDynproProcessing(DispatcherServlet.java:154)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:116)
     at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:48)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:385)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:263)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:340)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:318)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:821)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:239)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:147)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
     at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
Caused by: com.sap.dictionary.runtime.DdException:
     at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker$1.fillSldConnection(DataTypeBroker.java:89)
     at com.sap.dictionary.runtime.ProviderFactory.internalResolveLogicalNameToJCODestination(ProviderFactory.java:408)
     at com.sap.dictionary.runtime.ProviderFactory.resolveLogicalNameToJCODestination(ProviderFactory.java:354)
     at com.sap.dictionary.runtime.ProviderFactory.internalGetProvider(ProviderFactory.java:215)
     at com.sap.dictionary.runtime.ProviderFactory.getProvider(ProviderFactory.java:180)
     at com.sap.dictionary.runtime.DdDictionaryPool.getProvider(DdDictionaryPool.java:78)
     at com.sap.dictionary.runtime.DdDictionaryPool.getDictionary(DdDictionaryPool.java:64)
     at com.sap.dictionary.runtime.DdDictionaryPool.getDictionary(DdDictionaryPool.java:39)
     at com.sap.dictionary.runtime.DdBroker.getDataType(DdBroker.java:149)
     at com.sap.dictionary.runtime.DdBroker.getStructure(DdBroker.java:180)
     at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getStructure(DataTypeBroker.java:295)
     ... 44 more
I found at "How to Use the Web Dynpro Content Administrator.pdf" a good place to look for my mistake. But a big question appeared:
Once I get in the Web Dynpro Content Administrator and found my deplyed app I found this two JCo:
WD_MODELDATA_DEST
WD_RFC_METADATA_DEST
Witch status was a little grey diamond, or something like that. ¿Can somebody tell me what is happening with this Jco?
The page 27 of the pdf mentioned before, was different in my IDE SAP Developer Studio, the only option, by default, that give me was to choose between WD_MODELDATA_DEST and
WD_RFC_METADATA_DEST. I have two fields that must be fill to pass to the next dialog box or finished the creation RFC model.
Thanks a lot !!!

Hi,
In NWDS, you should have defined your own JCo destinations when creating your model. For example:
- WD_<yourApp>_MODELDATA_DEST
- WD_<yourApp>_RFC_METADATA_DEST
Then in the Web Dynpro Content Administrator, you must create them, ie specify connection types, connection parameters...
For this, choose the button Maintain JCo Destinations, find the connetions you've created in NWDS and click the button Create. Just follow the steps of the wizard, and you're done!
Regards,
Nicolas

Web Dynpro Application Accessing ABAP Functions

I wrote the example application for Web Dynpro Application Accessing ABAP Functions, as described in the tutorials for NWDS. But when I run, it only show me a blank blue page nothing else, how to fix this issue?
Thanks,
Jawed Ali

Hi Jawed,
Again, I'll insist you to please check if your view is embeded in the Window.
write some output message in the view to ensure that not only gui's, even the messages in the view are not coming.
if there is another issue, Please share with us.
Thank & Regards,
Namrta Mahajan

Running Web Dynpro Applications in Different Browsers

Hi,
I runned an Web Dynpro Application in different browsers(Opera, Firefox and Internet Explorer). The problem is that in Firefox is running fine, but in Internet Explorer some controls are missing and in Opera I got an Error Page that say the following:
An error has occurred:
"Failed to process the request."
Please contact your system administrator.
This page was created by SAP NetWeaver. All rights reserved.
Web Dynpro client:
Nokia Series 80 Client
Web Dynpro client capabilities:
User agent: Opera/9.25 (Windows NT 6.0; U; en), client type: op6, client type profile: op6, ActiveX: disabled, Cookies: enabled, Frames: enabled, Java applets: disabled, JavaScript: enabled, Tables: enabled, VB Script: enabled
Accessibility mode: false
Web Dynpro runtime:
Vendor: SAP, build ID: 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:13:14[UTC], changelist=455669, host=pwdfm101), build date: Wed Nov 14 08:48:35 GMT-03:00 2007
Web Dynpro code generators of DC agile.com/pmg_bonefish~webdynpro:
SapDictionaryGenerationCore: 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:57:42[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapMetamodelWebDynpro: 7.0013.20070703112649.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:00:50[UTC], changelist=454024, host=PWDFM101.wdf.sap.corp)
SapMetamodelCore: 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:45:23[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationTemplates: 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:15:27[UTC], changelist=455669, host=pwdfm101)
SapWebDynproGenerationCTemplates: 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:15:27[UTC], changelist=455669, host=pwdfm101)
SapGenerationFrameworkCore: 7.0013.20060719095755.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:44:42[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
SapIdeWebDynproCheckLayer: 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:04:26[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapMetamodelDictionary: 7.0013.20060719095619.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:54:53[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
SapMetamodelCommon: 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:45:30[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationCore: 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-11:15:04:37[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapDictionaryGenerationTemplates: 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-11:14:57:50[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
Web Dynpro code generators of DC sap.com/tcwddispwda: No information available!
Web Dynpro code generators of DC sap.com/cafUIptn~common:
SapDictionaryGenerationCore: 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-07:13:26:06[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
SapMetamodelWebDynpro: 7.0013.20070703112649.0000 (release=645_VAL_REL, buildtime=2007-08-07:13:28:49[UTC], changelist=454024, host=PWDFM101.wdf.sap.corp)
SapMetamodelCore: 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-07:13:14:35[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationTemplates: 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-07:13:42:07[UTC], changelist=455669, host=pwdfm101)
SapWebDynproGenerationCTemplates: 7.0013.20070717142021.0000 (release=645_VAL_REL, buildtime=2007-08-07:13:42:07[UTC], changelist=455669, host=pwdfm101)
SapGenerationFrameworkCore: 7.0013.20060719095755.0000 (release=645_VAL_REL, buildtime=2007-08-07:13:13:54[UTC], changelist=411255, host=PWDFM101.wdf.sap.corp)
SapIdeWebDynproCheckLayer: 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-07:13:32:11[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapMetamodelDictionary: 7.0013.20060719095619.0000 (release=645_VAL_REL, buildtime=2007-08-07:13:23:29[UTC], changelist=411251, host=PWDFM101.wdf.sap.corp)
SapMetamodelCommon: 7.0013.20061002105432.0000 (release=645_VAL_REL, buildtime=2007-08-07:13:14:42[UTC], changelist=419384, host=PWDFM101.wdf.sap.corp)
SapWebDynproGenerationCore: 7.0013.20061002110128.0000 (release=645_VAL_REL, buildtime=2007-08-07:13:32:21[UTC], changelist=419396, host=PWDFM101.wdf.sap.corp)
SapDictionaryGenerationTemplates: 7.0013.20061002105236.0000 (release=645_VAL_REL, buildtime=2007-08-07:13:26:13[UTC], changelist=419377, host=PWDFM101.wdf.sap.corp)
Web Dynpro code generators of DC sap.com/tcwdcorecomp: No information available!
J2EE Engine:
7.00 patchlevel 109044.44
Java VM:
Java HotSpot(TM) Server VM, version: 1.4.2_09-b05, vendor: Sun Microsystems Inc.
Operating system:
Windows 2003, version: 5.2, architecture: x86
I don´t know is the problem I have in both browsers Internet Explorer and Opera are from the browser or from the layout I´m using in Web Dynpro.
regards

Hi Aida,
For getting an information of the Web Browsers supported by SAP NetWeaver, check out the following link:
[http://service.sap.com/pam|http://service.sap.com/pam]
To access the Product Availability Matrix (PAM), you will need a sUser Login Name.
For Reference,
http://help.sap.com/saphelp_nw04s/helpdata/en/79/23c7410400c717e10000000a155106/frameset.htm
Regards,
Alka.

Running ABAP Web Dynpro Application without host entry of web server

Similar Messages

Maybe you are looking for