Running Activate Database Views activity in parallel in TDMS 4.0

Hello Colleagues,
We are running TDMS4.0 and as we need to hasten the process, we would like to ask if the activity ACTIVATION OF DATABASE VIEWS can run in parallel with activity DATA SELECTION START FOR TDMS HEADER TABLE? In the guided procedure, the ACTIVATION OF DATABASE VIEWS is dependent on the completion of DATA DELETION START IN RECEIVER SYSTEMS (which is already completed as per screenshot)
As per searching other KBA's database views are activated that may be de-activated after drop of tables in the receiver system. Which was why the prerequisite of this is completion of DATA DELETION START IN RECEIVER SYSTEMS.
Thus, we would like to know if the activity ACTIVATION OF DATABASE VIEWS can run in parallel with activity DATA SELECTION START FOR TDMS HEADER TABLE? Kindly see screenshot
Many thanks,
Meinard

Hello Meinard,
Yes, you can start activity "Activation of data base views" in parallel to activity "Data selection start for TDMS header tables". Once activation of database views is completed you can start "Data Transfer" activity.
Thanks
Anita

Similar Messages

Short Dump while fetching values from a Database view

Hi ALL,
Here is the code that is giving short dump
SELECT * FROM ZVMATLMOVE INTO TABLE I_MATLMOVE
    WHERE BUDAT >= V_LASTRUN_DATE
    AND   WERKS IN S_WERKS
    AND   LIFNR IN S_LIFNR
    AND   EBELN IN S_EBELN
    AND   MATNR IN S_MATNR
    AND   BWART IN S_BWART
(Please don't say that I am using * in the select query,
I knew that it is not a good way of fetching values)
Declaration of the internal table is:
DATA I_MATLMOVE LIKE ZVMATLMOVE OCCURS 0 WITH HEADER LINE.
The variable V_LASTRUN_DATE is:
DATA V_LASTRUN_DATE LIKE SY-DATUM.
We will be getting the lastrundate value from another table. And it is passing correct value (ex. 20060731)
ZVMATLMOVE is a database view created for MKPF and MSEG table. And I checked both table were consistent.
Dump Analysis:
Runtime errors         DBIF_RSQL_SQL_ERROR
Exception              CX_SY_OPEN_SQL_DB
Every thing is fine. But I don't know how it is going to dump. Any suggestions?

Hi !
It seams that your table is not correct / fully activated.
To check it out you should try the following:
- Go to the SE11
- Give it your table name and go to "Display"
- Check if the table is "active"
- Choose "Utilities->Database Object->Check" and see
if there are any errors
- go back and choose "Utilities->Runtime Object->Check"
and see if there are any errors
If there are any errors - try to activate the table again. You may need the "Utilities->Database Utiliy" for that.
After there are no more errors by checking all these your program should work.
Regards
Rainer
Some points would be nice if thate helped a bit.

Adding new field in Database view

Hi,
I am adding a new field to existing database view so only adding is enough or shall I use database utility. Please let me know.
Thanks & Regards,
Joseph

Views are basically, collection of fields from diffrent databse tables.You can define extra selections for fields in a selection view at runtime using dynamic selections. The extra selections are sent to the database and help to minimize the number of database accesses. This works as long as the database tables in the selection include of the logical database are defined for dynamic selections, and that the database program is programmed accordingly.
You can go to SE11, type the name of the view and add the additional field present in any of the tables and activate the view. Once activated the view will reflect the new field added and you can use this for selection purposes.
Regards
Vasu

How to activate the illustrator active document?

I have developed a javascript using pathItems for to validating the .eps file. If i run the script via "illustrator cs3", at the time of script(.js) running
stage, the illustrator active document goes to deactivate mode(not visible like hanging). After running the script, the document comes to an active mode like default view. I need to activate that illustrator active document(like default view) during the script running stage. Kindly advise me the possibilities and solution via scripting. This is for windows operating system.

You probably set up your main dialog window in "dialog" mode - dialogs are modal which means that they are exclusive and block everything else. You probably want a "window" type. See JavaScript tools guide CS3 page 97
example:
var mainWindow = new Window("window",undefined,"This is the window title");
mainWindow.add("statictext",undefined,"this is some static text inside the window");
Cheers,
Mike

I have a new Macbook pro and need to run some Windows software, it appears "Parallel" should work well from what I've have read. Will I have any issues or problems accessing and printing from various printers on my Windows 7 network within Parallel?

I have a new Macbook pro and need to run some Windows software, it appears "Parallel" should work well from what I've have read. Will I have any issues or problems accessing and printing from various printers on my Windows 7 network within Parallel? Is Parallel in fact the best way to go?

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

What do corrupted sql database viewer ?

There MS SQL 2005 server and a database that you want to connect to the server.
There mdf ldf and files. The problem is that, most likely, the base was incorrectly disabled, and now when you try to connect the message:
File activation failure. The physical file name "C: \ Program Files \ Microsoft SQL Server \ MSSQL.1 \ MSSQL \ Data \ GB_main_log2.ldf" may be incorrect.
The log can not be rebuilt because the database was not cleanly shut down. (Microsoft SQL Server, Error: 5120)
What do corrupted sql database viewer ?

Hi VectoriaKoalak,
As other post, the best bet is to restore the database from a good backup.
However, if you have no backups or have damaged backups. To fix the database, you can set the database in Emergency Mode and run DBCC CHECKDB with the REPAIR_ALLOW_DATA_LOSS option to fix up corruptions. For more detailed steps, please review
the following blog.
EMERGENCY-mode repair: the very, very last resort
http://www.sqlskills.com/blogs/paul/checkdb-from-every-angle-emergency-mode-repair-the-very-very-last-resort/
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Issue in configuring Standby Database from Active database in 11g by RMAN

POSTED THE SAME IN DATA GUARD CATEGORY UNABLE TO DELETE
Hi All,
I am facing issue in creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
Version of Database:11g(11.2.0.1.0)
Operating System:Linux 5
Error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
RMAN-03015: error occurred in stored script Memory Script
RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Primary Database Entries:
Tnsentry:
SONYPRD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)(UR=A)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listner Entry:
SID_LIST_SONYPRD =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtproc)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = SONYPRD)
(GLOBAL_DBNAME = SONYPRD)
Auxiliary Details:
Tns Entry:
SONYPRD =
(DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11g.localdomain)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listener Entry in auxiliary:
SID_LIST_SONYPRDSTBY =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = SONYPRDSTBY)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = SONYPRDSTBY)
TNSPING from Primary DB:
[oracle@oracle11g ~]$ tnsping sonyprdstby
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:39:28
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprdstby)(UR=A)))
OK (0 msec)
TNSPING from Auxuliary server
[oracle@oracle11gstby ~]$ tnsping sonyprd
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:40:19
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprd.localdomain)))
OK (10 msec)
Script Used for duplicate:
run {
allocate channel prmy1 type disk;
allocate channel prmy2 type disk;
allocate channel prmy3 type disk;
allocate channel prmy4 type disk;
allocate auxiliary channel stby type disk;
duplicate target database for standby from active database
spfile
parameter_value_convert 'sonyprd','sonyprdstby'
set db_unique_name='sonyprdstby'
set db_file_name_convert='/sonyprd/','/sonyprdstby/'
set log_file_name_convert='/sonyprd/','/sonyprdstby/'
set control_files='/u01/app/oracle/oradata/control01.ctl'
set log_archive_max_processes='5'
set fal_client='sonyprdstby'
set fal_server='sonyprd'
set standby_file_management='AUTO'
set log_archive_config='dg_config=(sonyprd,sonyprdstby)'
set log_archive_dest_2='service=sonyprd ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=sonyprd'
Tried the script from both Primary and auxiliary but no luck
[oracle@oracle11gstby admin]$ rman target sys/welcome@sonyprd auxiliary sys/*****@sonyprdstby
Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 21 17:26:24 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: SONYPRD (DBID=3131093559)
connected to auxiliary database: SONYPRD (not mounted)
Listener Status from primary:
[oracle@oracle11g ~]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:08:56
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 20-DEC-2012 17:42:17
Uptime 1 days 0 hr. 26 min. 41 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
Services Summary...
Service "sonyprd.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
Service "sonyprdXDB.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
The command completed successfully
Listener Status from Standby when database bring to Nomount state:
[oracle@oracle11gstby admin]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:11:54
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 21-DEC-2012 16:13:47
Uptime 0 days 1 hr. 58 min. 6 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11gstby/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11gstby)(PORT=1521)))
Services Summary...
Service "sonyprdstby" has 1 instance(s).
Instance "sonyprdstby", status BLOCKED, has 1 handler(s) for this service...
The command completed successfully
Please provide any work arounds to proceed further in creating the standby database.
Thanks,
Ram.
Edited by: 895188 on Dec 21, 2012 5:50 PM
Edited by: 895188 on Dec 21, 2012 6:09 PM
Edited by: 895188 on Dec 21, 2012 6:22 PM

Hello;
Script has to be run from auxiliary.
Great details, but what I don't see is how you connect in RMAN.
Example
Start RMAN
$ORACLE_HOME/bin/rman target=sys/@recover2 auxiliary=sys/@reclone
Recovery Manager: Release 11.2.0.2.0 - Production on Wed Feb 22 14:50:31 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: RECOVER2 (DBID=3806912436)
connected to auxiliary database: RECLONE (not mounted)Nothing in your tnsnames or listener jumps out as wrong. I copied them into my text editor and compared against my working ones.
Generally for active duplication I start the future standby on a pfile NOMOUNT.
Auxiliary Instance Initialization Parameters Needed :
DB_NAME
CONTROL_FILES
DB_BLOCK_SIZE
( add extra parameters like DB_FILE_NAME_CONVERT and LOG_FILE_NAME_CONVERT instead of using the SET command - clean up standby spfile right after duplication )
Then start RMAN and finally run a single line duplication command.
$ORACLE_HOME/bin/rman target=sys/@primary auxiliary=sys/@standby
RMAN>duplicate target database for standby from active database NOFILENAMECHECK;Best Regards
mseberg

Issue in creating the standby database from Active database using RMAN

Hi All,
I am facing issue in creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
Version of Database:11g(11.2.0.1.0)
Operating System:Linux 5
Error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
RMAN-03015: error occurred in stored script Memory Script
RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Primary Database Entries:
Tnsentry:
SONYPRD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)(UR=A)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listner Entry:
SID_LIST_SONYPRD =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtproc)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = SONYPRD)
(GLOBAL_DBNAME = SONYPRD)
Auxiliary Details:
Tns Entry:
SONYPRD =
(DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11g.localdomain)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listener Entry in auxiliary:
SID_LIST_SONYPRDSTBY =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = SONYPRDSTBY)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = SONYPRDSTBY)
TNSPING from Primary DB:
[oracle@oracle11g ~]$ tnsping sonyprdstby
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:39:28
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprdstby)(UR=A)))
OK (0 msec)
TNSPING from Auxuliary server
[oracle@oracle11gstby ~]$ tnsping sonyprd
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:40:19
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprd.localdomain)))
OK (10 msec)
Script Used for duplicate:
run {
allocate channel prmy1 type disk;
allocate channel prmy2 type disk;
allocate channel prmy3 type disk;
allocate channel prmy4 type disk;
allocate auxiliary channel stby type disk;
duplicate target database for standby from active database
spfile
parameter_value_convert 'sonyprd','sonyprdstby'
set db_unique_name='sonyprdstby'
set db_file_name_convert='/sonyprd/','/sonyprdstby/'
set log_file_name_convert='/sonyprd/','/sonyprdstby/'
set control_files='/u01/app/oracle/oradata/control01.ctl'
set log_archive_max_processes='5'
set fal_client='sonyprdstby'
set fal_server='sonyprd'
set standby_file_management='AUTO'
set log_archive_config='dg_config=(sonyprd,sonyprdstby)'
set log_archive_dest_2='service=sonyprd ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=sonyprd'
Tried the script from both Primary and auxiliary but no luck
[oracle@oracle11gstby admin]$ rman target sys/welcome@sonyprd auxiliary sys/*****@sonyprdstby
Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 21 17:26:24 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: SONYPRD (DBID=3131093559)
connected to auxiliary database: SONYPRD (not mounted)
Listener Status from primary:
[oracle@oracle11g ~]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:08:56
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 20-DEC-2012 17:42:17
Uptime 1 days 0 hr. 26 min. 41 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
Services Summary...
Service "sonyprd.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
Service "sonyprdXDB.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
The command completed successfully
Listener Status from Standby when database bring to Nomount state:
[oracle@oracle11gstby admin]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:11:54
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 21-DEC-2012 16:13:47
Uptime 0 days 1 hr. 58 min. 6 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11gstby/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11gstby)(PORT=1521)))
Services Summary...
Service "sonyprdstby" has 1 instance(s).
Instance "sonyprdstby", status BLOCKED, has 1 handler(s) for this service...
The command completed successfully
Please provide any work arounds to proceed further in creating the standby database.
Thanks,
Ram.

Pl do not post duplicates - Issue in configuring Standby Database from Active database in 11g by RMAN

Progammatic update a table with a database view in the page

Hi All,
I am using JDev 11g. With FOD database schema, I have one database view Products which comes from two tables Products_Base and Product_Transactions. I created three EOs (ProductEO, ProductsBaseEO, ProductTransactionsEO) and three VOs (ProductVO, ProductsBaseVO, ProductTransactionsVO) based on their EOs respectively.
Here is my scenario. I have an ADF form which is based on the database view Products and is dragged and dropped from Data Controls->ProductVO. When an existing record is submitted, a backing bean method will be called to update the data against the table Products_Base (and the table Product_Transactions at the same time) programmatically. An update method updateProductPrice() is added into the Application Module and published it to UI Client. The submit button in the page is created by directly dragging and dropping Data Controls->updateProductPrice into the page. When I run it, I got the following error message,
Failed to post data to database during "Update": SQL Statement "UPDATE PRODUCTS ProductEO SET COST_PRICE=:1 WHERE PRODUCT_ID=:2".
What I don't understand here is that, in my update method updateProductPrice(), it supposes to update the table Products_Base. But from the error, it appears that it is trying to update the view Products. Can anyone give me a help on what I did wrong here? When I try to debug it, it throws an exception to this line in the method updateProductPrice(),
getDBTransaction().commit();
Here are my codes,
The method which got called in the backing bean
public String cb6_action() {
DCBindingContainer bc = (DCBindingContainer)getBindings();
FacesCtrlAttrsBinding ProductId = (FacesCtrlAttrsBinding)bc.get("ProductId");
FacesCtrlAttrsBinding CostPrice = (FacesCtrlAttrsBinding)bc.get("CostPrice");
JUCtrlActionBinding action =
(JUCtrlActionBinding)bc.findCtrlBinding("updateProductPrice");
DCDataControl dc = action.getDataControl();
ApplicationModule am = (ApplicationModule)dc.getDataProvider();
AppModule service = (AppModule)am;
service.updateProductPrice(new Long(ProductId.toString()), CostPrice.toString());
return null;
public BindingContainer getBindings() {
return BindingContext.getCurrent().getCurrentBindingsEntry();
The update method defined in the Application module (AppModuleImpl.java)
public void updateProductPrice(long productId, String costPrice) {
ProductsBaseEOImpl product = retrieveProductById(productId);
if (product != null) {
try {
product.setCostPrice(new Number(costPrice));
getDBTransaction().commit();
catch (JboException ex) {
getDBTransaction().rollback();
throw ex;
catch (SQLException ex1) {
getDBTransaction().rollback();
private ProductsBaseEOImpl retrieveProductById(long productId) {
EntityDefImpl productDef = ProductsBaseEOImpl.getDefinitionObject();
Key productKey = ProductsBaseEOImpl.createPrimaryKey(new DBSequence(productId));
return (ProductsBaseEOImpl)productDef.findByPrimaryKey(getDBTransaction(),productKey);
Edited by: john wang on Oct 27, 2009 7:14 AM

or
merge into test
using (select rowid rid
            , id
            , sub_id
            , startdate
            , lead (startdate) over (order by id, sub_id) - 1 ed
       from test) x
on (x.rid = test.rowid)
when matched then
   update set end_date = x.ed
;

Rman clone duplicate database from active database

Hi All,
I read document saying that rman can duplicate database from active database (prod) to a remote server, so long as you configure listener and tnsname.
I am working toward it.
I met a problem, which is when i bring up auxiliary database in nomount mode, the listener service of that auxiliary database is in BLOCKED status, and throw out ora-12528 error when I rman auxiliary sys/pass@clonedb. Isn't nomount mode the mode which auxiliary db is supposed to be in?
(ora-12528: TNS:listener: all appropriate instances are blocking new connections)
Thanks,
milic

You may have run into the same problem like I did recently:
The (UR=A) clause in tnsnames.ora is intended to work with a dynamically registered handler so the use of SERVICE_NAME versus SID is preferred.
ORA-12528: TNS listener BLOCKED - trying to duplicate database
Also for further problems:
RMAN 11gR2 duplicate database ORA-17627 ORA-01017 RMAN-03009 ORA-17628

Problem with duplicate target database from active database

Hi all,
i try duplicate database from active database
- I have von target and auxiliary the same SYS Password
- tnsping wogks in both directions fine
- sqlplus to target and auxilairy works from both server
- Metalink Solution 1056174.1 not help
but in the Rman log become this error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at
RMAN-05501: aborting duplication of target database
RMAN-03015: error occurred in stored script Memory Script
RMAN-03009: failure of backup command on a1 channel at
ORA-17629: Cannot connect to the remote database server
ORA-17629: Cannot connect to the remote database server
i do do :
rman target sys/PASSWD@TARGET auxiliary sys/PASSWD
run
ALLOCATE CHANNEL a1 DEVICE TYPE DISK;
ALLOCATE AUXILIARY CHANNEL d1 DEVICE TYPE DISK;
duplicate target database to XXXXX
from active database
DB_FILE_NAME_CONVERT ('/XXXX/XXXX/XXXXXX','/XXXXX/XXXXXX/XXXXX/')
spfile
parameter_value_convert '/XXXX/','/XXXXX/'
set log_file_name_convert '/XXXXX/','/XXXXX/'
any Idea ?
Best Regards

Don't know if this will help, but I use the connect string below to connect, then run the command below. This is, of course, after the rman backup from the prod system has been copied to the flash_recovery_area of the aux database. All file paths are the same between the two systems. Works like a charm most nights. The local tnsnames file on the rman catalog server has working entries for @SDPROD, @rman and @SDSTB.
[Connect String]
rman TARGET SYS/xxxxx@SDPROD CATALOG rman/xxxxx@rman AUXILIARY SYS/xxxxx@SDSTB cmdfile D:\cladmin\Scripts\DuplicateSD.rcv LOG=D:\cladmin\Logs\DuplicateSD.f
[Command file block]
RUN{
ALLOCATE AUXILIARY CHANNEL aux1 DEVICE TYPE DISK;
DUPLICATE TARGET DATABASE TO DATABASENAME
NOFILENAMECHECK;
Edited by: user522620 on Jun 27, 2011 6:36 PM

Duplicate database from active database in 11g?

Does anyone know if it's possible to clone a database from stby by issuing RMAN duplicate database FROM ACTIVE DATABASE command in 11g?
I know it's possible from primary to create stby.
Thanks in advance

You may have run into the same problem like I did recently:
The (UR=A) clause in tnsnames.ora is intended to work with a dynamically registered handler so the use of SERVICE_NAME versus SID is preferred.
ORA-12528: TNS listener BLOCKED - trying to duplicate database
Also for further problems:
RMAN 11gR2 duplicate database ORA-17627 ORA-01017 RMAN-03009 ORA-17628

Bad performance when using complex database view with Toplink

Hi
Problem description
1. I have a complex query that collects the data from many DB tables. For this reason I create a database view based on this select. Using EJB 3.0 with Toplink I
mapped this view to a java object the same way I map database tables. The method I use to get the results is:
snippet code...
public List<VwKartela> VwKartela(Integer pperid) {
List<VwKartela> results = null;
Session session = getSessionFactory().acquireSession();
ExpressionBuilder bankfile = new ExpressionBuilder();
Expression exp1 = bankfile.get("perid").equal(pperid);
ReadAllQuery query = new ReadAllQuery();
query.setReferenceClass(VwKartela.class);
query.setSelectionCriteria(exp1);
results =(List<VwKartela>)session.executeQuery(query);
When running the select on the view prom SQL Plus I haven’t any performance problem.
2.Question: How can I improve the performance? I referenced to Toplink docs but I didn't improve the it.
Have anyone any experience is such cases?
Thank you
Thanos

Hi
After my last tests I conclude at the followings:
The query returns 1-30 records
Test 1: Using Form Builder
- Execution time 7-8 seconds
Test 2: Using Jdeveloper/Toplink/EJB 3.0/ADF and Oracle AS 10.1.3.0
- Execution time 25-27 seconds
Test 3: Using JDBC/ADF and Oracle AS 10.1.3.0
- Execution time 17-18 seconds
When I use:
session.setLogLevel(SessionLog.FINE) and
session.setProfiler(new PerformanceProfiler())
I don’t see any improvement in the execution time of the query.
Thank you
Thanos

Bounded task flow not executing in a default view activity.

Hi,
I am practising Region to Region Interaction between two bounded taskflows in an unbounded task flow.
I will just illustrate the theme:
*Unbounded task flow[ DEfault view activity(view1)]*
view1 contains Bounded task flow task 1 and task2.
task 1 contains fragment frag1 .
task 2 contains fragment frag2. I want to establish communication between task 1 and task2 through contextual events.
I have created managed bean seperately for each bounded taskflow bean1 in task1 and bean2 in task2 which are in session scope that is frag1 vaues are maaped to bean1 and frag 2 values are mapped to bean2.
I completed full flow of creating contextula events and event map too. I was stuck with errror.
So I created an application only with default view activity containg boundsed taskflow and fragments and respective beans without contextual event and event map , so that i can make sure atleast my basicview is executing properl;y. But I failed to have result.
Error is shown below:
<UIXRegion> <_warn> Error processing viewId: /task1/frag1 URI: /frag1.jsff actual-URI: /frag1.jsff.javax.el.PropertyNotFoundException: Target Unreachable, 'frag1' returned null     at com.sun.el.parser.AstValue.getTarget(Unknown Source)
     at com.sun.el.parser.AstValue.isReadOnly(Unknown Source)
     at com.sun.el.ValueExpressionImpl.isReadOnly(Unknown Source)
     at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer._getUncachedReadOnly(EditableValueRenderer.java:486)
     at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer.cacheReadOnly(EditableValueRenderer.java:416)
     at oracle.adfinternal.view.faces.renderkit.rich.LabeledInputRenderer.beforeEncode(LabeledInputRenderer.java:117)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:334)
     at org.apache.myfaces.trinidad.component.UIXComponentBase.encodeEnd(UIXComponentBase.java:767)
     at javax.faces.component.UIComponent.encodeAll(UIComponent.java:937)
**somw lines removed since exceeding word length**
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
<LifecycleImpl> <_handleException> ADF_FACES-60098:Faces lifecycle receives unhandled exceptions in phase RENDER_RESPONSE 6
javax.el.PropertyNotFoundException: Target Unreachable, 'frag1' returned null     at com.sun.el.parser.AstValue.getTarget(Unknown Source)
     at com.sun.el.parser.AstValue.isReadOnly(Unknown Source)
     at com.sun.el.ValueExpressionImpl.isReadOnly(Unknown Source)
     at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer._getUncachedReadOnly(EditableValueRenderer.java:486)
     at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer.cacheReadOnly(EditableValueRenderer.java:416)
     at oracle.adfinternal.view.faces.renderkit.rich.LabeledInputRenderer.beforeEncode(LabeledInputRenderer.java:117)
     at org.apache.myfaces.trinidad.render.CoreRenderer.encodeEnd(CoreRenderer.java:334)
     **somw lines removed since exceeding word length**     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
<Feb 14, 2013 10:09:12 AM IST> <Error> <HTTP> <BEA-101020> <[ServletContext@20743039[app:TaskR2R2 module:TaskR2R2-ViewController-context-root path:/TaskR2R2-ViewController-context-root spec-version:2.5 version:V2.0]] Servlet failed with Exception
javax.el.PropertyNotFoundException: Target Unreachable, 'frag13' returned null
     at com.sun.el.parser.AstValue.getTarget(Unknown Source)
     at com.sun.el.parser.AstValue.isReadOnly(Unknown Source)
     at com.sun.el.ValueExpressionImpl.isReadOnly(Unknown Source)
     at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer._getUncachedReadOnly(EditableValueRenderer.java:486)
     at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer.cacheReadOnly(EditableValueRenderer.java:416)
     Truncated. see log file for complete stacktrace
>
<Feb 14, 2013 10:09:12 AM IST> <Notice> <Diagnostics> <BEA-320068> <Watch 'UncheckedException' with severity 'Notice' on server 'DefaultServer' has triggered at Feb 14, 2013 10:09:12 AM IST. Notification details:
WatchRuleType: Log
WatchRule: (SEVERITY = 'Error') AND ((MSGID = 'WL-101020') OR (MSGID = 'WL-101017') OR (MSGID = 'WL-000802') OR (MSGID = 'BEA-101020') OR (MSGID = 'BEA-101017') OR (MSGID = 'BEA-000802'))
WatchData: DATE = Feb 14, 2013 10:09:12 AM IST SERVER = DefaultServer MESSAGE = [ServletContext@20743039[app:TaskR2R2 module:TaskR2R2-ViewController-context-root path:/TaskR2R2-ViewController-context-root spec-version:2.5 version:V2.0]] Servlet failed with Exception
javax.el.PropertyNotFoundException: Target Unreachable, 'frag13' returned null
     at com.sun.el.parser.AstValue.getTarget(Unknown Source)
     at com.sun.el.parser.AstValue.isReadOnly(Unknown Source)
     at com.sun.el.ValueExpressionImpl.isReadOnly(Unknown Source)
     at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer._getUncachedReadOnly(EditableValueRenderer.java:486)
     at oracle.adfinternal.view.faces.renderkit.rich.EditableValueRenderer.cacheReadOnly(EditableValueRenderer.java:416)
     at oracle.adfinternal.view.faces.renderkit.rich.LabeledInputRenderer.beforeEncode(LabeledInputRenderer.java:117)
somw lines removed since exceeding word length
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
SUBSYSTEM = HTTP USERID = <WLS Kernel> SEVERITY = Error THREAD = [ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' MSGID = BEA-101020 MACHINE = DS-E06995E6AA3D TXID = CONTEXTID = f03d4fb0a8f478c1:-6d1db003:13cd6f5c4ce:-8000-0000000000000039 TIMESTAMP = 1360816752931
WatchAlarmType: AutomaticReset
WatchAlarmResetPeriod: 30000
>
<Feb 14, 2013 10:09:16 AM IST> <Alert> <Diagnostics> <BEA-320016> <Creating diagnostic image in c:\users\dineshvishnukumar-c\appdata\roaming\jdeveloper\system11.1.1.4.37.59.23\defaultdomain\servers\defaultserver\adr\diag\ofm\defaultdomain\defaultserver\incident\incdir_248 with a lockout minute period of 1.>

The error logs point to an error in your EL that references the frag1 bean. Firstly, rather than use session scope you must consider using pageFlowScope for your managed bean.

Running Oracle database 10g and 11g on same 5 RAC nodes

Hello Gurus,
Could any body throw light if I can install and sucessfully run Oracle database 10g and 11g on the same Oracle RAC installation setup.My setup is below
Number of nodes-5
OS- windows 2003 or RHEL5
storage- DELL EMC SAN
Clusterware- oracle version11g
File system-Automatic storage management(ASM)
After I successfully setup clusterware,ASM on the nodes,I would want to install 11g database on all 5 nodes .
Then Install 10g database on only 3 of the nodes using the same clusterware.
What are your views on the same.
Also FYI... as per metalink node 220970.1(RAC: Frequently Asked Questions) one can do such a setup.
what iam looking for is practical experience if anyone has implemented this in production system,if yes any issues faced and how tough it is to support.
Thanks,
Imtiyaz

You could run an 11g database and 10g database on the same cluster as long as you use Clusterware 11g.
The administration aspect will drastically change according to the platform you run on. As of now, it appears you don't know whether it will be Linux or Windows.
It would be practical to support the same database release.

Running Activate Database Views activity in parallel in TDMS 4.0

Similar Messages

Maybe you are looking for