Running commands on GNOME login/logout

Hi everyone,
I have a truecrypt partition which I want to mount on GNOME login and dismount on logout. My approach is different to the one in the Truecrypt wiki since I don't like having passwords stored unencrypted in files:
What I want to do is basically run "sudo truecrypt --auto-mount=favorites" everytime my user logs in to GNOME (not to a terminal) and run "sudo truecrypt -d" on logout.
How can I do this? I didn't find anything in the GNOME wiki entry or on the web, only for logins in general using .bashrc which is not what I want.
Thanks for any help.
BTW, does anyone know why there is no possibility to start TrueCrypt minimized to tray (the TrueCrypt Background Task) on Linux? Also, the Windows version has a "Mount favorite volumes on startup" setting which I couldn't find in the Linux version. These two things would have saved me a lot of time.

arkham wrote:If you are using gdm to login/logout you could take a look in /etc/gdm. There are some folders called PreSession and PostSession which may be useful to you,
Somehow these folders don't work for me. I decided to use the GNOME startup programs to run the mount command since it shows a window requesting the volume password. I added a "Truecrypt" file with the following content to the PostSession folder, made it executable by everyone, but my volume doesn't get unmounted.
#!/bin/sh
sudo truecrypt -d
exit 0
The solution for the login command is basically found, any suggestions how to get the PostSession file working or even another way to run the logout command?

Similar Messages

Gnome run command source .bashrc

Hi, after using just xmonad for a long time I'm now trying to get gnome and xmonad to play nicely together. I am starting my gnome-xmonad session from GDM which was started with runlevel 5 in inittab--I followed the wiki. Now in gnome, the run command dialogue (alt-f2) does not seem to source my ~/.bashrc. I use an xmonad run util and under gnome-xmonad that run util does not source my ~/.bashrc either. I have my PATH specified in my .bashrc but I cannot run the commands that rely on the path set in .bashrc. I do have a ~/.bash_profile which sources ~/.bashrc, so that is not the issue. In a terminal, my path is fine, but not from those run dialogues. The xmonad run util worked fine when I would start xmonad with startx. Any advice on how to get gnome to source my ~/.bashrc?

I don't know about sourcing your .bashrc in gnome, but you are probably better off moving your PATH definition to your .bash_profile, before you source the .bashrc.

HR runtime error on agent login/logout

                   Good afternoon.
Has anyone run in a a runtime error when running agent login/logout reports? I am unable to run this report.
a runtime error occurred while executing the inquiry. i know there used to be bugs on this but.
uccx, ha, 8.5.1. i have included the log. Thank you for any assistance.

I removed my deployments from the remote OC4J server and removed deployment entries from http-web-site.xml and server.xml. I redeployed my simpleJSP bibean application to my local and remote OC4J server. It works locally but fails now with this new error:
javax.servlet.jsp.JspException: BIB-10310 An unknown exception occurred.
BIB-10101 Handler failed to handle UserObject.
oracle.bali.ewt.elaf.windows.WindowsEWTPagingComponentUI
     at oracle.dss.addins.jspTags.PresentationTag.doStartTag(PresentationTag.java:254)
     at simpleJSP.jspService(_simpleJSP.java:72)
     [SRC:/simpleJSP.jsp:6]
     at com.orionserver[Oracle9iAS (9.0.2.0.0) Containers for J2EE].http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.compileAndServe(JspPageTable.java:508)
Regards,
Dan

The GNOME login manager crashes upon booting

Every time I start up Arch, I get a window with a sad face in a computer saying that there was a problem and I have the option to log out which does nothing. The only way I am able to access my desktop is to open another terminal, manually log in, and run "startx." The login manager appeared one time but I have no clue how it happened. This is a fresh install of Arch that I installed yesterday. I am not familiar with troubleshooting so could you tell me what logs to post here? Here is a log file named :0.log which was located in the GDM log folder. This might say something about my issue.
X.Org X Server 1.15.0
Release Date: 2013-12-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.12.5-1-ARCH x86_64
Current Operating System: Linux SERN 3.13.8-1-ARCH #1 SMP PREEMPT Tue Apr 1 12:19:51 CEST 2014 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=ae1186fc-165e-4d4d-949a-ccf939e3da53 rw quiet elevator=deadline
Build Date: 09 January 2014 08:47:24AM
Current version of pixman: 0.32.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Apr 5 11:55:11 2014
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Automatically adding GPU devices
(WW) The directory "/usr/share/fonts/OTF/" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
(==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(--) PCI:*(0:1:0:0) 10de:1187:1462:2847 rev 161, Mem @ 0xfd000000/16777216, 0xf0000000/134217728, 0xf8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension Present
Initializing built-in extension DRI3
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
(II) NVIDIA GLX Module 334.21 Thu Feb 27 13:54:04 PST 2014
Loading extension GLX
(==) Matched nouveau as autoconfigured driver 0
(==) Matched nvidia as autoconfigured driver 1
(==) Matched nv as autoconfigured driver 2
(==) Matched modesetting as autoconfigured driver 3
(==) Matched fbdev as autoconfigured driver 4
(==) Matched vesa as autoconfigured driver 5
(==) Assigned the driver to the xf86ConfigLayout
(WW) Warning, couldn't open module nouveau
(II) Unloading nouveau
(EE) Failed to load module "nouveau" (module does not exist, 0)
(II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
(WW) Warning, couldn't open module nv
(II) Unloading nv
(EE) Failed to load module "nv" (module does not exist, 0)
(WW) Warning, couldn't open module modesetting
(II) Unloading modesetting
(EE) Failed to load module "modesetting" (module does not exist, 0)
(WW) Warning, couldn't open module fbdev
(II) Unloading fbdev
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.15.0, module version = 2.3.2
(II) NVIDIA dlloader X Driver 334.21 Thu Feb 27 13:34:35 PST 2014
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) VESA: driver for VESA chipsets: vesa
(++) using VT number 1
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.15.0, module version = 1.0.0
(WW) Unresolved symbol: fbGetGCPrivateKey
(II) Loading /usr/lib/xorg/modules/libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.15.0, module version = 1.0.0
(EE) NVIDIA: Failed to initialize the NVIDIA kernel module. Please see the
(EE) NVIDIA: system's kernel log for additional error messages and
(EE) NVIDIA: consult the NVIDIA README for details.
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.15.0, module version = 1.1.0
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.15.0, module version = 1.0.0
(II) VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) VESA(0): Depth 24, (--) framebuffer bpp 32
(==) VESA(0): RGB weight 888
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Using gamma correction (1.0, 1.0, 1.0)
(II) VESA(0): VESA VBE DDC supported
(II) VESA(0): <default monitor>: Using default hsync range of 31.50-48.00 kHz
(II) VESA(0): <default monitor>: Using default vrefresh range of 50.00-70.00 Hz
(II) VESA(0): <default monitor>: Using default maximum pixel clock of 65.00 MHz
(WW) VESA(0): Unable to estimate virtual size
(II) VESA(0): Not using built-in mode "1920x1080" (no mode of this name)
(II) VESA(0): Not using built-in mode "1280x1024" (no mode of this name)
(II) VESA(0): Not using built-in mode "1280x800" (no mode of this name)
(II) VESA(0): Not using built-in mode "1024x768" (no mode of this name)
(II) VESA(0): Not using built-in mode "800x600" (no mode of this name)
(II) VESA(0): Not using built-in mode "640x480" (no mode of this name)
(II) VESA(0): Not using built-in mode "640x400" (no mode of this name)
(II) VESA(0): Not using built-in mode "320x400" (no mode of this name)
(II) VESA(0): Not using built-in mode "320x240" (no mode of this name)
(II) VESA(0): Not using built-in mode "320x200" (no mode of this name)
(WW) VESA(0): No valid modes left. Trying less strict filter...
(II) VESA(0): <default monitor>: Using hsync range of 31.50-48.00 kHz
(II) VESA(0): <default monitor>: Using vrefresh range of 50.00-70.00 Hz
(II) VESA(0): <default monitor>: Using maximum pixel clock of 65.00 MHz
(WW) VESA(0): Unable to estimate virtual size
(II) VESA(0): Not using built-in mode "1920x1080" (hsync out of range)
(II) VESA(0): Not using built-in mode "1280x1024" (hsync out of range)
(II) VESA(0): Not using built-in mode "1280x800" (hsync out of range)
(II) VESA(0): Not using built-in mode "640x400" (hsync out of range)
(II) VESA(0): Not using built-in mode "320x400" (hsync out of range)
(II) VESA(0): Not using built-in mode "320x240" (illegal horizontal timings)
(II) VESA(0): Not using built-in mode "320x200" (illegal horizontal timings)
(--) VESA(0): Virtual size is 1024x768 (pitch 1024)
(**) VESA(0): *Built-in mode "1024x768"
(**) VESA(0): *Built-in mode "800x600"
(**) VESA(0): *Built-in mode "640x480"
(==) VESA(0): DPI set to (96, 96)
(II) VESA(0): Attempting to use 60Hz refresh for mode "1024x768" (118)
(II) VESA(0): Attempting to use 60Hz refresh for mode "800x600" (115)
(II) VESA(0): Attempting to use 60Hz refresh for mode "640x480" (112)
(**) VESA(0): Using "Shadow Framebuffer"
(II) Loading /usr/lib/xorg/modules/libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.15.0, module version = 1.1.0
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.15.0, module version = 1.0.0
(==) Depth 24 pixmap format is 32 bpp
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.15.0, module version = 1.0.0
(II) VESA(0): initializing int10
(II) VESA(0): Primary V_BIOS segment is: 0xc000
(II) VESA(0): VESA BIOS detected
(II) VESA(0): Setting up VESA Mode 0x118 (1024x768)
(==) VESA(0): Default visual is TrueColor
(==) VESA(0): Backing store enabled
(==) VESA(0): DPMS enabled
(==) RandR enabled
(EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
(II) config/udev: Adding input device Power Button (/dev/input/event2)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.15.0, module version = 2.8.2
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event2"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
(II) config/udev: Adding input device Power Button (/dev/input/event1)
(**) Power Button: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Power Button'
(**) Power Button: always reports core events
(**) evdev: Power Button: Device: "/dev/input/event1"
(--) evdev: Power Button: Vendor 0 Product 0x1
(--) evdev: Power Button: Found keys
(II) evdev: Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
(II) config/udev: Adding drm device (/dev/dri/card0)
(II) xfree86: Adding drm device (/dev/dri/card0)
(WW) Warning, couldn't open module modesetting
(II) Unloading modesetting
(EE) Failed to load module "modesetting" (module does not exist, 0)
xf86: found device 0
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event17)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event14)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device Audio-Technica ATR USB microphone (/dev/input/event0)
(**) Audio-Technica ATR USB microphone : Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Audio-Technica ATR USB microphone '
(**) Audio-Technica ATR USB microphone : always reports core events
(**) evdev: Audio-Technica ATR USB microphone : Device: "/dev/input/event0"
(--) evdev: Audio-Technica ATR USB microphone : Vendor 0x909 Product 0x1a
(--) evdev: Audio-Technica ATR USB microphone : Found 1 mouse buttons
(--) evdev: Audio-Technica ATR USB microphone : Found absolute axes
(--) evdev: Audio-Technica ATR USB microphone : Found absolute multitouch axes
(II) evdev: Audio-Technica ATR USB microphone : Forcing absolute x/y axes to exist.
(--) evdev: Audio-Technica ATR USB microphone : Found keys
(II) evdev: Audio-Technica ATR USB microphone : Forcing relative x/y axes to exist.
(II) evdev: Audio-Technica ATR USB microphone : Configuring as mouse
(II) evdev: Audio-Technica ATR USB microphone : Configuring as keyboard
(**) evdev: Audio-Technica ATR USB microphone : YAxisMapping: buttons 4 and 5
(**) evdev: Audio-Technica ATR USB microphone : EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Audio-Technica ATR USB microphone " (type: KEYBOARD, id 8)
(II) evdev: Audio-Technica ATR USB microphone : initialized for absolute axes.
(**) Audio-Technica ATR USB microphone : (accel) keeping acceleration scheme 1
(**) Audio-Technica ATR USB microphone : (accel) acceleration profile 0
(**) Audio-Technica ATR USB microphone : (accel) acceleration factor: 2.000
(**) Audio-Technica ATR USB microphone : (accel) acceleration threshold: 4
(II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event5)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event4)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event11)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event10)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event9)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event8)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event7)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event6)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1025 (/dev/input/event12)
(**) Logitech Unifying Device. Wireless PID:1025: Applying InputClass "evdev pointer catchall"
(II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:1025'
(**) Logitech Unifying Device. Wireless PID:1025: always reports core events
(**) evdev: Logitech Unifying Device. Wireless PID:1025: Device: "/dev/input/event12"
(--) evdev: Logitech Unifying Device. Wireless PID:1025: Vendor 0x46d Product 0xc52b
(--) evdev: Logitech Unifying Device. Wireless PID:1025: Found 20 mouse buttons
(--) evdev: Logitech Unifying Device. Wireless PID:1025: Found scroll wheel(s)
(--) evdev: Logitech Unifying Device. Wireless PID:1025: Found relative axes
(--) evdev: Logitech Unifying Device. Wireless PID:1025: Found x and y relative axes
(II) evdev: Logitech Unifying Device. Wireless PID:1025: Configuring as mouse
(II) evdev: Logitech Unifying Device. Wireless PID:1025: Adding scrollwheel support
(**) evdev: Logitech Unifying Device. Wireless PID:1025: YAxisMapping: buttons 4 and 5
(**) evdev: Logitech Unifying Device. Wireless PID:1025: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:1025" (type: MOUSE, id 9)
(II) evdev: Logitech Unifying Device. Wireless PID:1025: initialized for relative axes.
(**) Logitech Unifying Device. Wireless PID:1025: (accel) keeping acceleration scheme 1
(**) Logitech Unifying Device. Wireless PID:1025: (accel) acceleration profile 0
(**) Logitech Unifying Device. Wireless PID:1025: (accel) acceleration factor: 2.000
(**) Logitech Unifying Device. Wireless PID:1025: (accel) acceleration threshold: 4
(II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1025 (/dev/input/mouse0)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:2016 (/dev/input/event13)
(**) Logitech Unifying Device. Wireless PID:2016: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:2016'
(**) Logitech Unifying Device. Wireless PID:2016: always reports core events
(**) evdev: Logitech Unifying Device. Wireless PID:2016: Device: "/dev/input/event13"
(--) evdev: Logitech Unifying Device. Wireless PID:2016: Vendor 0x46d Product 0xc52b
(--) evdev: Logitech Unifying Device. Wireless PID:2016: Found 1 mouse buttons
(--) evdev: Logitech Unifying Device. Wireless PID:2016: Found scroll wheel(s)
(--) evdev: Logitech Unifying Device. Wireless PID:2016: Found relative axes
(II) evdev: Logitech Unifying Device. Wireless PID:2016: Forcing relative x/y axes to exist.
(--) evdev: Logitech Unifying Device. Wireless PID:2016: Found absolute axes
(II) evdev: Logitech Unifying Device. Wireless PID:2016: Forcing absolute x/y axes to exist.
(--) evdev: Logitech Unifying Device. Wireless PID:2016: Found keys
(II) evdev: Logitech Unifying Device. Wireless PID:2016: Configuring as mouse
(II) evdev: Logitech Unifying Device. Wireless PID:2016: Configuring as keyboard
(II) evdev: Logitech Unifying Device. Wireless PID:2016: Adding scrollwheel support
(**) evdev: Logitech Unifying Device. Wireless PID:2016: YAxisMapping: buttons 4 and 5
(**) evdev: Logitech Unifying Device. Wireless PID:2016: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:2016" (type: KEYBOARD, id 10)
(II) evdev: Logitech Unifying Device. Wireless PID:2016: initialized for relative axes.
(WW) evdev: Logitech Unifying Device. Wireless PID:2016: ignoring absolute axes.
(**) Logitech Unifying Device. Wireless PID:2016: (accel) keeping acceleration scheme 1
(**) Logitech Unifying Device. Wireless PID:2016: (accel) acceleration profile 0
(**) Logitech Unifying Device. Wireless PID:2016: (accel) acceleration factor: 2.000
(**) Logitech Unifying Device. Wireless PID:2016: (accel) acceleration threshold: 4
(II) config/udev: Adding input device PC Speaker (/dev/input/event3)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event4)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
removing GPU device /sys/devices/pci0000:00/0000:00:02.0/0000:01:00.0/drm/card0 /dev/dri/card0
(II) config/udev: Adding drm device (/dev/dri/card0)
(II) xfree86: Adding drm device (/dev/dri/card0)
(WW) Warning, couldn't open module modesetting
(II) Unloading modesetting
(EE) Failed to load module "modesetting" (module does not exist, 0)
xf86: found device 0
(II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event7)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event9)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event10)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event8)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event11)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event15)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event5)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event17)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event16)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event14)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
(II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event6)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.
I have Mesa, Vesa, and the "nvidia" drivers installed.
Last edited by kensclark16 (2014-04-05 19:19:25)

Please edit your post and use code tags, like this:
X.Org X Server 1.15.0
Release Date: 2013-12-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.12.5-1-ARCH x86_64
Current Operating System: Linux SERN 3.13.8-1-ARCH #1 SMP PREEMPT Tue Apr 1 12:19:51 CEST 2014 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=ae1186fc-165e-4d4d-949a-ccf939e3da53 rw quiet elevator=deadline
Build Date: 09 January 2014 08:47:24AM
Current version of pixman: 0.32.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Apr 5 11:55:11 2014
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor "<default monitor>"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration...
This makes it A LOT easier to read.

[SOLVED] Gnome login hangs on the first try

Since this past weekend, when I try to log into gnome, it accepts my password and greys out the password entry box, but just sits there forever. If I hit escape it aborts properly, and the second try always works. Where should I be looking to see what's going wrong the first time?
I'm also having another, more serious problem that may be related: whenever the "Authentication Required" window pops up for a settings change or mounting another disk, it gives me the same greyed-out hang. But trying again doesn't work, since cancelling it cancels the attempt altogether - the next try just hangs again. As it is I can only do any root operations through the command-line; gnome is totally neutered by this. So -- what is this gksu-like functionality of gnome 3 properly called, and how do I debug it? Does it have a log somewhere I should look for?
Last edited by jorenko (2014-03-25 11:02:19)

I've restarted polkitd on the command-line without --no-debug, and it shows NO relevant information at all. After cancelling the grayed-out dialog, I get:
Error performing authentication: GDBus.Error:org.freedesktop.PolicyKit1.Error.Cancelled: Authentication dialog was dismissed by the user (polkit-error-quark 1)
21:54:02.838: Operator of unix-session:2 FAILED to authenticate to gain authorization for action org.freedesktop.policykit.exec for unix-process:10885:60499253 [bash] (owned by unix-user:jorenko)
But there's nothing from when I entered my password and the graying-out began.
Interestingly, when I used --replace to replace the polkitd that systemd had started for me, I got only command-line auth (gnome wouldn't launch the dialog at all, and "pkexec echo hi" gave me a command-line password prompt), which actually worked. But when first stopping the systemd version, then running it again manually, I got the above result.

Boot up, Login / Logout very slow

Hi all,
I have a mid 2010 Mac Pro (Dual Quad Core 2.6, 12GB RAM, 1TB 7200 HD). The computer all of a sudden became extremely slow at normal tasks (opening a Finder window, running commands on Terminal). I ended up doing a clean install of Mavericks (previously running Snow Leopard) after trying all else (which took much longer than usual).
Unfortunately now, the computer takes ages to boot (read: 10-15 minutes) and another 5 minutes to log in and out. This is a fresh install of Mavericks so it's nothing wrong with the PC. I did a diagnostic test on the Hard Drive and it passed. Also got TechTools Pro and ran tests on the RAM, Video Card and SMART on the HD and it passed. I couldn't boot into AHT (Apple Hardware Tools) for some reason (both D and Option D during bootup).
One thing I did notice was that, before I reinstalled Mavericks, when I did a PRAM reset at boot and then booted with Verbose mode, bootup happened much quicker (2 minutes). However, after logging in it slowed down considerably.
I have no idea where the fault is. Even if it is a hardware fault, I can't begin to think where it might be.
AppleCare is likely out of question for me but I'm tech savvy so I don't mind replacing hardware myself.
Any help would be appreciated.

Update: Seems like regular tasks tend to slow down after a few minutes into login...

Mobile Account Login/Logout Sync Not Skipping Inputted Items

I'm running a Leopard Server 10.5.6 Advanced Config ODM.
No matter what I put into the Login & Logout Sync tab underneath "Skip items that match any of the following" it still syncs everything.
I enter "ends with" ".mp3", "mp3" and it still syncs the test MP3s I put onto the desktop for the user.
I ask it to not sync ~/Documents and it still syncs the test documents I put into that folder.
This user is set to sync at login and logout with no background sync. The client machine is using 10.5.6.
Merge with user's settings NOT checked
Background Sync > Never
Option > Never
Account Creation > Creation
Create mobile account when user logs in to network CHECKED
Create home:
with default sync settings: CHECKED

Thanks for the reply.
Under
GROUP->PREFERENCES->MOBILE->RULES
Login and Lougout Sync->Always
Sync at login and logout->Checked
Merge with user's settings->Not Checked and never has been.
Unfortunately, that can't be it
Here are some screen shots of my settings. As you can see Background sync is not enabled.
Nevermind, it won't let me attach files.
Message was edited by: jakelh

Agent Login Logout Activity report extensions are all blank

Hi there,
We are running UCCX ver 8.5.1.11003-32. When we run the Agent Login Logout Activity report the extensions are all blank as seen below.
Anyone know why this would be?
Thanks
Alexis

In case anyone comes across this.
This is a bug, resolved in UCCX 8.5.1SU4
Cheers
Alexis

SSH SUDO passwordless to run commands on remote server

Hi Experts,
We are running various OS/Network and Database related commands and scripts on Local and Remote Server to perform/compare the results
As part of this activity, we have bottleneck on running commands/scripts on the remote server as we need to provide password everytime whenever we use SSH command
Also, we need to run command as ssh sudo su - oracle for security purpose which prompts password two times.
we would like to automate this process in order to save password securely(temporarily) while running ssh sudo commands/scripts.
I see, there are various solutions using SSHPASS,EXPECT commands, however we dont have anything available to use within our group.
We may not be able to use SSHPASS as this component not installed during VM build, so we left with only option to use EXPECT.
So, Need your help to get any example working script using EXPECT for ssh sudo passwordless connection.
Appreciate if anybody can share ideas or working scripts
Thanks in advance

FWIW, here is a small script that I wrote several years ago that may help you to automate the password less ssh setup with a remote system. I just verified it and changed it to create a RSA key. The script still works and runs fine under Oracle Linux and Mac OS X.
Simply create a script called "passwordless-ssh" with the content shown below.
Assign execute privileges: chmod u+x passwordless-ssh
Then run the script as following:
./passwordless-ssh user@target_hostname_or_ip
The script will create a ssh RSA private and public key, prompt for the remote host password and the copy the pubic key to the remote host. A subsequent ssh login to the remote host should no longer prompt for the password. It is essential however that the scrips runs in an interactive session, which is verified.
#!/bin/bash
# Creating SSH public RSA key if non exist and copying it to remote target
# for passwordless SSH login.
# Author: Catch 22, Oracle OTN, 28-APR-2015
# Arguments: $1 (ssh login to remote target)
ME=passwordless-ssh
LOGFILE="/tmp/$ME.log"
f-mode()
# Check if session is interactive (terminal) or non-interactive (UDEV).
# Output: 0 = interactive, 1 = non-interactive
   [[ -t 0 || -p /dev/stdin ]] && return 0 || return 1
f-log()
# Display messages in interactive mode, or write output to syslog
# (/var/log/messages) when in non-interactive mode. Write the messages
# to a logfile if the syslog logger interface command is not available.
# Input: $1 = text
   if f-mode; then
      echo "$ME: $1"
   elif hash logger; then
      logger "$ME: $1"
   else
      echo "$ME:`date`: [logger] Cannot execute, aborting" >> $LOGFILE
      echo "$ME:`date`: $1" >> $LOGFILE
   fi
# Exit and show error if current session is not interactive.
[ ! f-mode ] && f-log "[session] non-interactive, aborting" && exit 1
keyfile="$HOME/.ssh/id_rsa"
[ -z "$1" ] && echo "Missing 'user@target_host' argument. Aborted." && exit 1
if [ ! -f $keyfile ]; then
   mkdir -p $HOME/.ssh
   ssh-keygen -t rsa -f $keyfile -N ''
fi
keycode=`cat $keyfile.pub`
remote_cmd2="echo "$keycode" >> $remote_ssh_file; chmod 644 $remote_ssh_file;"
remote_ssh_dir="~/.ssh"
remote_ssh_file="$remote_ssh_dir/authorized_keys"
ssh -q $1 "mkdir -p $remote_ssh_dir; chmod 700 $remote_ssh_dir
echo "$keycode" >> $remote_ssh_file; chmod 644 $remote_ssh_file"
unset ME LOGFILE keyfile keycode remote_ssh_dir remote_ssh_file
#END

[solved] hook to run commands when user logs in? (before bash profile)

Is there any way to run commands when a user logs in but before the bash profile is sourced?
For example, I have a user account with a home directory on /tmp. When the user logs in, the home directory might not exist so there will be no .bash_profile to source. I want to run a script to create the directory if necessary and copy some files into it. How can that be done?
I thought of putting something in /etc/profile or /etc/profile.d/, but I would like to run something before the user's shell and environment become active.
I can use /etc/rc.local to do what I want, but I would prefer a hook to ensure that everything is set right when the user logs in.
Any ideas?
*edit*
Solution
In my case, I found that I could write my own shell script and set it as a login shell. In the script, I can configure everything I need before launching the interactive shell, then clean up anything after it exits.
Last edited by Xyne (2011-12-10 19:34:07)

Thanks, dammannj. PAM could probably do what I need but I think I have found a simpler solution (see original post).

Run command doesn't remember command history

Hi All,
I'm running Windows 8.1, my Run dialog ox is always empty as shown below. Could anyone guide as how to enable Run command history?

Hi aniruddha.jagdale,
Is this a domain environment ?Did the run history work correctly before ?Have you made any modification to this machines before ?Will the other history recorded for example the jump list ,windows explorer ?
According to my experience ,the run history will be recorded by default and it is usually recorded in the following registry keys .
HKEY_CURRENT_USER\ Software\ Microsoft\ Windows\ CurrentVersion\ Explorer\ RunMRU
For the options in the task and navigation properties ,please check the following options to have a check.
We can try to login with another account to have a check .
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

URGENT-How to run command in java application???

URGENT!
i would like to run command to invoke some applications (like invoke application using command line in DOS) in my java appication.
Do anyone know how to do this? Thanks a lot.

This question has been asked upteen times.
ok the code is
for win95
Runtime.getRuntime().exec( "start c:\\tmp.txt" );
for win 2000
Runtime.getRuntime().exec( "cmd /C startc:\\tmp.txt" );
//change the file to your desire file..
i am not so sure about win98, sorry...

How can I get all Login/Logout details

How can I get all Login/Logout details of all SAP Users from SAP Server/Database of any one year? I am asking about SAP License User. Is their any Table or Report by which I can get these details? For example USR02(Logon Data) Table store the last login/logout details of SAP Users. So in same way is any table which store Users Login/Logout details through out a year or month.

Hi Sudheer,
Check this .
You can find the transactions by a particular user from the transaction SM04.
SM04 gives you the details of the users logged in,terminals,transactions the user is working on, the time he has logged in,no of sessions user has opened, and the memory used by the user's programs... all of that w.r.t to the client we login. but we can't get info like date and number of times the user has logged in.
U can see tables:
USR01 User master record (runtime data)
USR02 Logon data
USR03 User address data
USR05 User Master Parameter ID
USR12 User master authorization values
plz rewards points if helpful
cheers
srinivas.k
Edited by: k srinivas on Apr 28, 2008 11:54 AM

Error while running commands at RMAN prompt

Hi ,
We have a few oracle 10g(10.2.0.3) databases on AIX platform.We use RMAN backup with a recovery catalog database.
The rman full(level 0)backups are scheduled dailly and running fine.When I tried to run commands like 'list backup','report obsolete' I'm getting the following errors.
connected to target database: TICSPROD (DBID=2626621498)
connected to recovery catalog database
RMAN> report obsolete;
RMAN retention policy will be applied to the command
RMAN retention policy is set to redundancy 3
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of report command at 08/04/2011 07:49:36
RMAN-06004: ORACLE error from recovery catalog database: ORA-03113: end-of-file on communication channel
ORACLE error from recovery catalog database: ORA-03114: not connected to ORACLE
RMAN> list backup;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of list command at 08/04/2011 07:56:25
RMAN-06004: ORACLE error from recovery catalog database: ORA-03113: end-of-file on communication channel
ORACLE error from recovery catalog database: ORA-03114: not connected to ORACLE
But the recovery catalog database is up and running fine.For few other databases I'm able to run the above commands without errors and for some databases I'm getting the errors as mentioned above.
Could someone help me out with this...

Thanks Tycho for your reply.
Please find the output of the query in recovery catalog.
SQL> select * from v$resource_limit;
RESOURCE_NAME CURRENT_UTILIZATION MAX_UTILIZATION INITIAL_AL LIMIT_VALU
processes 49 83 5000 5000
sessions 30 63 5505 5505
enqueue_locks 27 94 65910 65910
enqueue_resources 27 73 24440 UNLIMITED
ges_procs 0 0 0 0
ges_ress 0 0 0 UNLIMITED
ges_locks 0 0 0 UNLIMITED
ges_cache_ress 0 0 0 UNLIMITED
ges_reg_msgs 0 0 0 UNLIMITED
ges_big_msgs 0 0 0 UNLIMITED
ges_rsv_msgs 0 0 0 0
gcs_resources 0 0 0 0
gcs_shadows 0 0 0 0
dml_locks 0 76 24220 UNLIMITED
temporary_table_locks 0 3 UNLIMITED UNLIMITED
transactions 1 10 6055 UNLIMITED
branches 0 0 6055 UNLIMITED
cmtcallbk 0 1 6055 UNLIMITED
sort_segment_locks 0 5 UNLIMITED UNLIMITED
max_rollback_segments 11 11 6055 65535
max_shared_servers 20 20 800 800
parallel_max_servers 0 32 320 3600
22 rows selected.
The alert log of the catalog database is continously getting refreshed with the following message.
Incremental checkpoint up to RBA [0x3b3.a780.0], current log tail at RBA [0x3b3.a78f.0]
Mon Aug 8 00:16:17 2011
Incremental checkpoint up to RBA [0x3b3.abf8.0], current log tail at RBA [0x3b3.ac4f.0]
Mon Aug 8 00:46:19 2011
Incremental checkpoint up to RBA [0x3b3.1451b.0], current log tail at RBA [0x3b3.1451b.0]
Mon Aug 8 01:16:21 2011
Incremental checkpoint up to RBA [0x3b3.14b15.0], current log tail at RBA [0x3b3.14baa.0]
Mon Aug 8 01:46:23 2011
Incremental checkpoint up to RBA [0x3b3.14be1.0], current log tail at RBA [0x3b3.14bf0.0]
Mon Aug 8 02:16:25 2011
Incremental checkpoint up to RBA [0x3b3.15069.0], current log tail at RBA [0x3b3.150a9.0]
Mon Aug 8 02:46:27 2011
Incremental checkpoint up to RBA [0x3b3.150ed.0], current log tail at RBA [0x3b3.150ed.0]
What could be the potential cause of the issue I'm facing .Could you please guide me...

How to run command SQLLoader Oracle in c#

Hello,
How to run command SQLLoader Oracle in c#. I try my sourcode for run this SQLLoader, but nothing happen and error "No process is associated with this object.". Please tell me how i fix it. Thanks.
This is my code:
System.Diagnostics.Process process1;
process1 = new System.Diagnostics.Process();
process1.EnableRaisingEvents = false;
string strCmdLine;
strCmdLine = @"/C SQLLDR XL/secreat@O11G CONTROL=E:\APT\LoadXL.ctl";
System.Diagnostics.Process.Start("CMD.exe", strCmdLine);
process1.WaitForExit();
process1.Close();

jesperdj ,thanks:)
actually,i am using eclipse to run my ant tasks programmatically,but I got trouble with the AntRunner class.it seems that i should config a proper classloader for it,but i just don't know how.please lend a hand:)thanks
robin

Running commands on GNOME login/logout

Similar Messages

Maybe you are looking for