Running H/F to read Header from Previous Page?

Hopefully someone has figured this one out and can share the solution with me.
I'm using Framemaker 7.1
I have a Heading (Call it HeadingX) with body text below it.
That body text carries over to the next page. On that same carry over page I also have another HeadingX.
I would like to have a running H/F that reads the Header from the prevous page ( and displays as: HeadingX continued).
I'm aware of using the +, - feature in the building block and tried the -
<paratext[-, HeadingX]
but that still reads from the current page.
is there any way to use the - with some sort of command to read back to the previous page only... to ignore instances if the HeaderX on the current page and beyond?
It seems like it should be so simple but I'm stumped.

OK, I still haven't had any luck with the markers (thank you though for trying to help me).
Here's what I have:
A Heading X (with a marker) and then body that flows to a second page. On that second page, I have the Running H/F reading the marker from the previous page (displaying as: HeadingX continued)
But further down that second page, I have a new Heading X (with a marker) and body that flows to a third page.
This creates the problem because the Runing H/F picks up the new HeadingX marker on the current page.
My solution seems simple but perhaps does not exist:
I need a Running H/F that will ignore content on the current page and ONLY READ BACKWARDS to previous pages.
Is there a way for someone to program such a thing? Is there an API for Framemaker out there to do this?
This format is a requirement for MIL-STD-40051 and I can't believe I'm the only/first one to ever face this dilemma!

Similar Messages

Backup error DBM-Api error ( -4'Reading header from pipe:(0:NO ERROR(0))')

Hello.
I have ContentServer on SLES 11 and MaxDB 7.6.06.
When I don`t create backup:
dbmcli -d SDB -u superdba,123456 -uUTL u2013c backup_start completeT
dbmsrv: /SAP_DB/76_SP_REL/linuxx86_64/genopt/sys/wrk/incl/SAPDB/ToolsCommon/Tools_DynamicUTF8String.hpp:871: Tools_UTF8ConstIterator Tools_DynamicUTF8String::GetIteratorAtBasis(unsigned int) const: Assertion `(ToPtr(iter) == ToPtr(End())) || (ToPtr(iter) < ToPtr(End()) && ElementType::IsValid(iter))' failed.
DBM-Api error ( -4'Reading header from pipe:(0:NO ERROR(0))')
But when I try create this backup from SAP MaxDB Database Studio - all ok.
Regards.

Hello,
1. "But when I try create this backup from SAP MaxDB Database Studio - all ok".
 Did you connect to the database as superdba user?
 What is the dbm user of the database?
 Did you use the completeT medium to create the database backup?
2. "dbmcli -d SDB -u superdba,123456 -uUTL u2013c backup_start completeT"
 Run:
 dbmcli -d SDB -n localhost -u superdba,123456
 <enter>
dbmcli on SDB>db_connect
<enter>
dbmcli on SDB>backup_start completeT
<enter>
dbmcli on SDB>exit
 update with results.
 See the document at:
 http://maxdb.sap.com/doc/7_6/43/b2fbe195701bbde10000000a1553f7/content.htm
Regards, Natalia Khlopina

Developing a 2 page form, username on the 1st page, password on 2nd how can i force FF to use the username from previous page when it asks to remember acct info?

I am developing a 2 page signup form, where the person enters their username on the 1st page and password on the 2nd.
When I test the form, FF asks to remember my password for the site - however it thinks the zipcode (field above the password) is the username on the account.
I have tried to put their username/email in a hidden field on the 2nd page, just above the password field - and that did not work.
How can i force FF to use the username from previous page when it asks to remember acct info?

This website is using autocomplete=off to prevent Firefox from saving and filling the name and password.
You can remove autocomplete=off with a bookmarklet to make Firefox save names and passwords and other form data.
*http://kb.mozillazine.org/User_name_and_password_not_remembered

Animatioin get distbub while navigation from previous page and next page

animatioin get distbub while navigation from previous page and next page

To get the value from dropdown list:
For example:
In Layout
 <htmlb:dropdownListBox id = "country"
 nameOfKeyColumn = "land1"
 nameOfValueColumn = "landx"
 selection = "<%=country%>"
 onSelect = "displayregion"
 table = "<%=iland%>" />
Oninputprocessing:
 CALL METHOD REQUEST->GET_FORM_FIELD
 EXPORTING
 NAME = 'country'
 RECEIVING
 VALUE = country.
*Reward each useful answer
Raja T

Read Text from HTML-Pages and want to solve "ChangedCharSetException"

Hello,
I have an app that connect via threads with pages and parse them an gives me only the Text-version of a HTML-page. Works fine, but if it found a page, where the text is within images, than the whole app stopps and gave me the message:
javax.swing.text.ChangedCharSetException
        at javax.swing.text.html.parser.DocumentParser.handleEmptyTag(DocumentParser.java:169)
        at javax.swing.text.html.parser.Parser.startTag(Parser.java:372)
        at javax.swing.text.html.parser.Parser.parseTag(Parser.java:1846)
        at javax.swing.text.html.parser.Parser.parseContent(Parser.java:1881)
        at javax.swing.text.html.parser.Parser.parse(Parser.java:2047)
        at javax.swing.text.html.parser.DocumentParser.parse(DocumentParser.java:106)
        at javax.swing.text.html.parser.ParserDelegator.parse(ParserDelegator.java:78)
        at aufruf.main(aufruf.java:33)So I tried to catch them with "getCharSetSpec()" and "keyEqualsCharSet( )" from the class "javax.swing.text.ChangedCharSetException" and hoped that this solved the problem. But still doesen't work...
Then I looked at the web and found, that I have to add the line:
doc.putProperty("IgnoreCharsetDirective", new Boolean(true));"doc." is a new HTML Dokument, created with the HTMLEditorKit. I do not have much knowledge about that and so I hope, that someone can explain me, how I can solve that problem, within my code.
Here we go:
import javax.swing.text.*;
import java.lang.*;
import java.util.*;
import java.net.*;
import java.io.*;
import javax.swing.text.html.*;
import javax.swing.text.html.parser.*;
public class myParser extends Thread
        private String name;
        public void run()
                try
                        URL viele = new URL(name);                       // "name" ia a variable with a lot of links
                URLConnection hs = viele.openConnection();
                hs.connect();
                if (hs.getContentType().startsWith("text/html"))
                        InputStream is = hs.getInputStream();
                        InputStreamReader isr = new InputStreamReader(is);
                        BufferedReader br = new BufferedReader(isr);
                        Lesen los = new Lesen();
                        ParserDelegator parser = new ParserDelegator();
                        parser.parse(br,los, false);
        catch (MalformedURLException e)
                System.err.print("Doesn't work");
        catch (ChangedCharSetException e)
                e.getCharSetSpec();
                e.keyEqualsCharSet();
                e.printStackTrace();
        catch (Exception o)
        public void vowi(String n)
                name = n;
}and for the case that it is important here is the class "Lesen"
import java.net.*;
import java.io.*;
import javax.swing.text.*;
import javax.swing.text.html.*;
import javax.swing.text.html.parser.*;
class Lesen extends HTMLEditorKit.ParserCallback
        public void handleStartTag(HTML.Tag t, MutableAttributeSet a, int pos)
                try
                        if ((t==HTML.Tag.P) || (t==HTML.Tag.H1) || (t==HTML.Tag.H2) || (t==HTML.Tag.H3) || (t==HTML.Tag.H4) || (t==HTML.Tag.H5) || (t==HTML.Tag.H6))
                                System.out.println();
                catch (Exception q)
                        System.out.println(q.getMessage());
        public void handleSimpleTag(HTML.Tag t,MutableAttributeSet a, int pos)
                try
                        if (t==HTML.Tag.BR)
                                System.out.println(); // Neue Zeile
                                System.out.println();
                catch (Exception qw)
                        System.out.println(qw.getMessage());
        public void handleText(char[] data, int pos)
                try
                        System.out.print(data);                                           // prints the text from HTML-pages
                catch (Exception ab)
                        System.out.println(ab.getMessage());
}Thanks a lot for helping...
Stephan

parser.parse(br,los, false);
parser.parse(br,los, true);

Passing Request to a POPUP LOV from previous page

Hi All,
I'm stuck again :( and its urgent..
I have a popup LOV and i want to populate values in it based on REQUEST coming from first page.
If I click CREATE on first page POPUP LOV should display certain values and if I click UPDATE on first page, it should populate different set of values.
Also when I navigate further from this page and return back, the LOV's should have values based on previous request selected.
For this I have created an item P_REQ which stores value of request from first page i.e :P_REQ wil have values CREATE or UPDATE.
Now I'm able to pass this value to a select list. However a POPUP list is not able to fetch this P_REQ value.
MY query for LOV is as below
select d1 d ,r1 r
from
(select name d1 ,ID r1,'C' up_cr
FROM Client
'WHERE statusid in (1,3)
union
select name d1,ClientID r1,'U' up_cr
FROM Client_List)
where up_cr = decode(:P_REQ,'CREATE','C','U')
ORDER BY d1
Kindly help.. Its Urgent..

Hi,
If you use that computation to set the value of P_REQ it is actually also saving it in the session. The value stored can then be retrieved by the popup LOVs query using :P_REQ so you don't need to pass the value at all as it is already available.
To see this, go to: [http://apex.oracle.com/pls/otn/f?p=33642:237] The list of employees has INSERT or UPDATE in the final column. This is used in the link on the EMPNO column as the "Request" setting. This link passes you to another page which uses the computation to set the value in P238_REQUEST (this is displayed on the screen). Then you have a link to "Open popup". All this does is open another page which has a region with a source of: Request value: &P238_REQUEST.
Andy

How do I retain formatting from previous Pages version

As I add sections to my pages document (designed in a previous Pages version), I notice that everything is completely messed up. Pictures & text are being moved to the wrong pages...

That is due to Pages 5 having a different file format and 100 fewer features than Pages '09.
At best it alters previous files, at worst it damages them:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&mforum=iworktipsn trick
Peter

Unable to read data from previous calls...!

I am trying to capture data from the previous calls using the following code...
The program "/irm/sapliparm" has value in the variable "gs_ipar_infocus-x-arhdr-artyp" at runtime. I am able to see this value in debug mode. I need this value in a variable in my routine. Below is the code that I have written, but, this is not working. sy-subrc is 4 at the assign statement.
data: artyp type /irm/iparhdr-artyp,
 lv_artyp type /irm/iparhdr-artyp,
 g_iparhdr type /irm/iparhdr,
 objky type nast-objky,
 line type string,
 lv_var type string.
FIELD-SYMBOLS: <lv_artyp> type any. "/irm/iparhdr-artyp.
move '(/irm/sapliparm)gs_ipar_infocus-x-arhdr-artyp' to line.
lv_var = line .
assign (lv_var) to <lv_artyp>.
if <lv_artyp> is assigned.
 move <lv_artyp> to artyp.
 unassign <lv_artyp>.
endif.
I want to capture the value in variable "(/irm/sapliparm)gs_ipar_infocus-x-arhdr-artyp" inside my program.
Please let me know if you have an idea on how to capture the value.
Thank you in advance,
Srinath

Srinath,
The trick you are using seems OK to access standard program parameters which are not available in user-exits / BADIs.
I am also using similar code at some places and is working well for me.
Is gs_ipar_infocus-x-arhdr-artyp a single variable or a nested structure ?
Define <lv_artyp> as type of /irm/iparhdr-artyp and try.
Define lv_var of chat type and try.
My sample code which works well is as below :
constants: prgwa(30) type c value '(SAPMV50A)XVBADR_SAV[]'.
types: t_sadrvb type table of sadrvb.
FIELD-SYMBOLS: <prgwa> type t_sadrvb ,
 <watab> type SADRVB.
assign (prgwa) to <prgwa>.
if <prgwa> is assigned.
 loop at <prgwa> ASSIGNING <watab> .
 endloop.
endif.
I hope it helps you find your problem.
Regards,
Diwakar

Readonly table with where clause value from previous page

Hi
I am using jdeveloper 10.1.3.
I have a globalhome page where the user enteres a reference number. i have a backing bean for the globalhome page that runs a method to run an sql that seraches for this reference number, if the reference number exsits the user is directed to a detail page.
this detail page should display details of this reference number.
i have set up a read only table to display this data based on a view object with a bind varaible in the where clause.
however i am unsure how to set this bind varaible value to the reference entered in the first globalhome page.
please can anyone advise how to do this.
regards

Hi,
You can follow following steps to achieve this
1) Write a custom method in your Application module like
public void executeMyVO(String bindVarValue)
MyVOImpl vo= getMyVo();
vo.setNamedWhereClauseParam(<bind variable name decalred in VO>,bindVarValue);
vo.execute();
2) Expose the above method to client. (Right click AM-->Client-->Shift method from left to right)
3) In the pagedef of globalhome page, create a method action for the aboce created custom method
4) execute the method action from your backing bean after you run an sql that seraches for this reference number.
Hope this help.
Vikram

Column header on previous page after paste or delete

Anyone figure out how to prevent this from happening? Just a bug? The only way I've been about to get rid of it is to edit the row just about the misplaced header and hit return.

Lelia150 wrote:
I was trying to 1) delete an Image in order to insert a different one and link it to a page; 2) delete the Header in order to insert a border and then replace the Header.
I seem to have succeeded with the Image rollover replacement and link. Clicking on the Header should have activated it so that I could delete it; but it didn't.
This is the problem with working in Design View only. You really need to work in Split View so you can see the code that DW creates/selects for you. Often times, selecting elements in Design View will capture too much or too little code. When you hit delete, you may have deleted much more code than was needed. The result is invalid code, unbalanced tags, etc.. all of which might explain why your page is blank in Design View.
Switch to code view. Copy & paste the remaining code into a web forum reply (do not use e-mail, it won't come through). If we can see the code you have to work with, we might be able to help you repair it.
Nancy O.

Are there any widgets availble for creating a to-read list from web pages?

I frequently find myself wanting to read specific pdf's or web page content but not having the time to do it when I find them. It would be lovely to have an easy to use storage space for them on the dashboard as I frequently use it keep myself on task.
I know there are a wealth of apps that can save pdf content for later viewing (yojimbo, evernote, etc ..) but I'm specifically wondering if there is anything that either integrates those tools into the dashboard or just has a stand alone widget.
Having the ability to "send to" from any browser to this widget for easy transfer and possible storage would be key.

I just hand code my HTML forms because I know what I'm doing. But if you prefer to use the Insert Panel > Forms tab, you'll need to check out this HTML5 forms tutorial by David Powers.
Making HTML5 Forms in DW CC (video)
http://tv.adobe.com/watch/learn-dreamweaver-cc/html5-forms-workflow/
Next, use CSS to style your form labels, legends, fieldsets, input fields and submit button. See example below, view source in browser to see the code.
http://alt-web.com/TEST/Basic-HTML5form-jquery.html
Now that you have your HTML form, you need a script to gather, validate and process the form data. Ask your hosting provider if they have a form-to-email script you can use. Many hosts have scripts already on their servers which you can activate from your C-Panel or by referencing the script in your form's action attribute.
<form action="path-to-form-on-server/form-to-email-script.php">
If your host doesn't have scripts you can use, find out which server-side programming languages your server supports -- PHP, ASP, ASP.net, Perl, etc.. This dictates what kind of scripts you can use.
Ideally, you want to find a script that is a) secure, b) hides your e-mail address from robots and c) has built in spam prevention.
http://foundationphp.com/tutorials/email.php
Nancy O.

How to read XML from web page inside servlet/jsp ?

i have a url, which on sending request, shows XML in browser.
Now i need to read this XML in browser and then manipulate it according to my need and display it on another page.
actually the process is. :
1) i have to first retrieve an xml from other site. (XML will only be shown in browser)
2.)then i have to read the Xml and show it in according to my requirements.
Is there any way to read XML directly from a Web Page ??
is their logic to accomplish this.
e.g in Servlet i can do somewhat like this :
String wholeXml=Somemethod(url);
Please Advice

Hi,
if u wanna extract data from XML. you can use Digester(Apache-jakarta) parser. All u need to create the beans(as per the data in xml), that will be populated by Digester.
Digester takes xml(string) as parameter and populates the bean specified.
U can use this bean in ur JSP.
:::Note:::; use Digester in ur servlet.
for more read:::
http://www.onjava.com/pub/a/onjava/2002/10/23/digester.html
I hope it shall work..
@mit

How to populate field on page with Primary Key value from previous page

I am trying to create a patient tracking system for a group of doctors. There is an add patient form based on the Patient table (which has Patient_Id as its primary key) which branches to a pre-operative assessment form. I would like to populate the pre-op assessment Patient_Id field with the Patient_Id generated by the Add Patient page during processing, which comes from the Patient_seq sequence. How can I do this? I have tried using a computation on the Pre-Op Assessment form, but no matter what I put in, the field remains blank.

Hi,
If I understand you correctly, once patient record is created you branching to next page (pre-operative assessment form). First create a static hidden item in patient form *:PX_PATIENT_ID_COPY*.
Create an On submit after computation and validation process in patient form to get the inserted patient_id from patient table. Here is the code -
SELECT patient_id into :PX_PATIENT_ID_COPY from patient_table where rownum=1
order by patient_id descI would not use the sequence to get the current value because if the inserted record been deleted from your patient table, sequence current value would not be valid to find that record in patient table.
Basically when the record been inserted, the process get the value and put into the hidden item.
Pass the value from the hidden item to the next page by setting them in page branch. Under the Action section in the page branch, Set this items field type - *:PX_PATIENT_ID* (next page item for patient_id). Type *&PX_PATIENT_ID_COPY.* in the with these values field. Make sure you include dot(.) after *&PX_PATIENT_ID_COPY*.
Give it a try now. Hope it would helps.
Regards,
Tajuddin
Blog: http://aspblog.whitepagesbd.com
web: http://tajuddin.whitepagesbd.com

Reading MQRHF2 Header from MQ message.

Hi
I am getting MQ messages from an application using IBM Message Broker.
My requirement is to read the MQRFH2 Header from MQ message.
I didnt find any class in com.ibm.mq.jar file. I found the functionality in JMS but I am not supposed to use it.
How can I read header from MQ message?
Can someone please help me in overcoming this problem.
Thanks in advance.

Ya I have already gone through that but my problem is I am not supposed to use JMS Message.
I must use MQ Message that is coming from IBM Message Broker.
But MQMessage class doesnt contain any method to get or set MQRFH2 header. There are methods to get MQMD headers.
Can you please suggest me the approach which I should follow.
Thanks and regards,

Showing «previous page» resp. «next page» buttons in fullscreen mode

Hello,
I'd like Adobe Reader to display «previous page» resp. «next page» buttons in fullscreen mode like Acrobat Pro does on the left hand buttom corner (or anywhere else...). Is there a way to create a PDF that does that automatically while it opens in «Reader» in fullscreen as well? all I get right now is the hand symbol with an arrow in it...
Thanks for any hints!

In the preferences of Adobe Reader enable the entry *Show navigation bar':

Running H/F to read Header from Previous Page?

Similar Messages

Maybe you are looking for