Running oracle graphics in 2.5 that were developed in 3.0

I have developed some graphics in version 3.0, however I want to run them in 2.5
Is there a way?

hello,
i doubt that. the file formats have most likely changed. you can open files in earlier versions but you might loose vital parts of your report by doing that.
regards,
the oracle reports team --pw

Similar Messages

When opening a word doc in pages i am loosing the graphic images from powerpoint that were embedded in the word doc

When opening a word doc in pages i am loosing the graphic images from powerpoint that were embedded in the word doc

Are the images placed in a table? Many Word user have the habit of doing that. Tables are not handles the same way in Word and Pages so they get "hidden" in Pages. One way to find this out is to change the size of the paper of the document. You do that in the Page setup in the file menu. Create a document that is much longer that the default one and see if you images will pp up.

Upgraded from LR4 to LR5.7. Apparently successful download on iMac27" 5K running OS X10.2. Collections that were clear in LR4 appear badly blurred when opened in LR5.7. What's,wrong?

Upgraded from LR4 to LR5.7. Apparently successful download on iMac27" 5K running OS X10.2. Collections that were clear in LR4 appear badly blurred when opened in LR5.7. What's wrong?

Thanks, everyone, for your suggestions.
John: I back up the catalogue (and optimize/check its integrity) every time I quit Lightroom - which is why excluding it from Time Machine isn't the end of the world. I did rename the catalogue early on in my troubleshooting process - as you say, I didn't like the fact I felt out of control of it.
I tried synchronizing a folder that had some flags: when I'd done there were three flags in the folder. (I have unclicked - and clicked and then unclicked - the 'unsaved metadata' checkbox in View Options: as I say, Lightroom shouldn't be displaying these flags at all.)
Rob: Thanks for understanding why I'm fretting! I've checked my XMP sidecars, as you suggest, and they have read and write privileges. I then checked the last-modified date on the XMPs that came up with flags after I'd synchronized that folder. One of them displayed the time I'd just synchronized the folder (it's one I haven't worked on apart from applying a blanket preset in LR2, and then a blanket update to PV2012 in LR4, as I've done to all the images I haven't yet worked on individually); the other two showed the time (I presume) I worked on them yesterday. I selected these three and applied command-S: they then showed, correctly, that they'd been modified a minute before. So far, that folder's now flag-free. (As I said in my original post, the flags sometimes do seem to vanish if I save enough times - and they're unpredictable, not necessarily appearing on the same images in a collection or folder as before I do I group save/clear conflict.)
Mollysnoot: I don't see how the Mac OS would be doing this (although who knows - I'm not a software expert). I don't have any other programs open that can modify images. And since these flags can reappear instantly when I've dealt with the conflict - before I've had time to take a breath, even - I don't think they represent any actual modifications.

How can I open and edit files that were developed and published by ftp to my host on my old macbook, which I can no longer access.

How can I open and edit files that were developed and published via ftp to my host on my old macbook, which I can no longer access. The HD containing the files cannot be accessed. I want to be able to download the published files to be edited in iweb?

You CAN'T download published files and then edit them in iWeb because iWeb can't open them - it has no import facility so is unable to open any html or css files - a previously published site.
You can download these files yes, but you'll need to use them as a guide or to cut and paste text from there whilst you re-build your site in iWeb.
The only other way is to download the files and then open them with an html editor such as TextWrangler or use one of the other web design programmes out there that is capable of importing html and css such as Dreamweaver of Flux 4.
These are your only alternatives as iWeb can't import and if you want to continue to use iWeb, then you'll have to re-build your site from scratch. If you do just remember to back up your domain.sites file this time around - it is found under your User/Library/Applicaion Support/iWeb/domain.sites.

Have you tried running Oracle Graphics demo in 6i? Urgent

I have tried old OGDEMO package which perfectly runs with Forms
4.5 and Graphics 2.5 the same with og.pll library after
recompiling in 6i, giving errors like og-01629 and og-00609.
Drill Down demo example is not working and so many others.
Please guide.
Thanking You

Hello,
I have followed your suggestion and did as per the instructions in the demo.
Please find below the details :
1. I have copied the 'Demos 11g' folder in the folder which contains the 'Forms' folder. (meaning my Forms and Demos 11g are in the same location)
2. In the application definition in the formsweb.cfg file - I have added the FormsGraph.jar. Check the below line.
archive_jini=......,forms/demos_11g/demos/jars/FormsGraph.jar
3.Then I copied the FormsGraph.jar file into the forms/java directory.
4.I have also made the below entry in the formsweb.cfg
[BIGraph]
archive_jini=frmall_jinit.jar,/forms/formsdemo/jars/demo.jar,forms/demos_11g/demos/jars/FormsGraph.jar
archive=frmall_jinit.jar,/forms/formsdemo/jars/demo.jar,forms/demos_11g/demos/jars/FormsGraph.jar
* I was able to execute the Graph.fmb and could see the Graph. *
But in the layout editor i got this error :
FRM-13008 Cannot find JavaBean with the name 'Oracle.forms.demos.bigraph.FormsGraph' .
To resolve this I updated my CLASS_PATH (env variable in the system - control panel)
/forms/demos_11g/demos/jars/FormsGraph.jar
And the above error was resolved. :-).
But the sad part is that now when i execute the Graph.fmb , I CANNOT SEE the graph :( :(
I reverted back the change that I made with the CLASS_PATH variable but still the graph is not visible.
Please help.
Regards,
SRT
PS: sorry for such a long post.
Edited by: 883955 on Sep 13, 2011 8:03 PM

Would *.vi files run on a Windows platform if they were developed on a Unix platform?

I have been working on a Linux machine with Labview 6.1, and would like to know if the *.vi files would run on a Windows platform running Labview.

Absolutely. I don't recall that there are any Platform dependent calls in LabVIEW for Linux. Give it a shot, and please post here if you have any problems.
Congratulations for choosing Linux, and LabVIEW for Linux.
I have always been a proponent of platform independent programming, and of Linux/Unix (okay, ANYTHING but Windows...evil, pure evil...). If you develop in Linux, and run in Windows, you are in fact developing a platform independent program (at least, if there are NO platform dependent calls in your program...)
Good luck, and keep us posted.

How to identify all jobs that were running at a particular point in time?

TES 6.1.0.391
From time to time, we have a need to identify all jobs that were running at a particular moment in time on a particular agent (we have about 800 agents)...eg "what was running ("Active") at 09:03:42 a.m. two days ago on agent XYZ?"
I've used other job schedulers, and have written queries to extract that info, but I thought before I work on one for Tidal that I would ask the community....how are you getting this info?
Any help is greatly appreciated, thanks.

I had some time over the weekend and was able to come up with something of use.
Please note that our repository is MSSQL
select jobmst_prntname as ParentJobName,
a.jobmst_prntid as ParentJobId,
a.jobmst_id as JobId,
a.jobdtl_id as JobDetailID,
jobmst_name as JobName,
b.owner_name as JobOwnerName,
c.jobdtl_cmd as JobCommand,
c.jobdtl_params as JobParameters,
jobmst_lstchgtm as LastUpdateDate,
d.nodlstmst_name as AgentListName
,[jobrun_status]
,[jobrun_duration]
,[jobrun_time] as starttime
,DATEADD(ss,jobrun_duration, jobrun_time) as endtime
,f.nodmst_name as AgentName
,[jobrun_owner]
,[jobrun_cmd]
,[jobrun_rundt]
,[jobrun_batch]
,[jobrun_params]
,[jobrun_launchtm]
,[jobrun_fullpath]
from Admiral..jobmst a,
Admiral.dbo.[owner] b,
Admiral.dbo.jobdtl c,
Admiral.dbo.nodlstms d,
Admiral.dbo.jobrun e,
[Admiral].[dbo].[nodmst] f
where a.jobmst_owner=b.owner_id
and a.jobdtl_id=c.jobdtl_id
and c.nodlstmst_id=d.nodlstmst_id
and e.jobmst_id=a.jobmst_id
and e.nodmst_id=f.nodmst_id
and jobmst_active='Y' --This condition shows only the active jobs
and jobrun_rundt ='2014-01-26' --This is the job run date. If the job finishes the next day, that is what is going to be used.
and f.nodmst_name = 'abc' --This is where you input your agent name
Hope this helps!

Pages tells me I need to upgrade to 5.0 to open documents from iCloud. When I go to the mac app store it says pages 5.0 is installed, but Pages says it's running 4.3. I just want to open documents on my mac that were created on my iPad.

Pages tells me I need to upgrade to 5.0 to open documents from iCloud, but the mac app store says its already installed and won't let me upgrade. when I check the version of pages I am running it says 4.3. I just want to be able to open documents on my mac that were created on my iPad. How can i get Pages 5.0?

Welcome to Apple Support Communities
You already have got Pages 5.0, but you still have got Pages 4.3, so Pages 4.3 is being opened instead of the newest version, being this the reason why you get a message telling you to update Pages to the most recent version.
If you don't need the old version, open a Finder window, choose Applications in the sidebar and delete the old Pages icon or move it to an external drive. I don't recommend you to do this, as users are complaining about the lack of features of the new version.
Instead, what you can do is to put the new Pages icon in the Dock by dragging it from the Finder window to the Dock, so you can open the new Pages version from the Dock and you can open all your documents with it after opening the application

HT201365 Before I downloaded the iOS 7 upgrade I could turn off the apps that were running in the background by double clicking the bottom button to bring up the apps. I would hold down on 1 app, X's would appear on each and then I could close them. How N

Before I downloaded the iOS 7 upgrade I could turn off the apps that were running in the background by double clicking the bottom button to bring up the apps. I would hold down on 1 app, X's would appear on each and then I could close them. How Now?

and
Because my first response would be....Oh, sure.....
Because I am sorry you are having a hassle with the intenet. There is nothing more frustruating than having to deal with a slow response, or a makeshift connection....hope it gets fixed soon!!!
Your friend,
GB

HT1420 I do not have the computers that were Authorized. How do I authorize my current computers to run iTunes?

I do not have the computers that were Authorized. How do I authorize my current computers to run iTunes?

Go back to the article you asked this question from, use the Deauthorize All function or the link to contact the iTunes Store staff, and then authorize computers as needed.
(110220)

Problem running Oracle Portal to Go (Oracle9i 1.0.2.0.0)

I have installed Oracle9i Application Server WE 1.0.2.0.0 Standard Edition on Windows2000 Professional Edition. I am getting problems regarding running Portal to Go.
The installer said that installation was successful. Moreover I have done the configuration tasks mentioned Oracle9i installation guide under post installation steps for Oracle9i.
But Oracle Portal to Go is not running and returning error message. Are there some other tasks still to perform to configure the Oracle Portal to Go Standard Edition?
Here it is a brief Description of what I have done with the installations process
System: Pentium II 500 MHZ with 256 MB RAM and 15 GB Hard Disk so enough space available for installations.
Windows 2000 professional was freshly installed
All pre installation tasks are done like paging file size is 896MB
Important Installation steps and points are as under (Standard Edition of Oracle 9i Application Server 1.0.2.0.0):
I followed all the steps given in Oracle 9i AS installation guide
On Windows 2000 Installer never asks for reboot before actually installing the Oracle 9i application server (Chapter 4 of installation guide: preparing system for installation: step5: page 5 of 25). So I manually reboot the system
During installation when I reached Database Access Descriptor (DAD) for Oracle Portal. In TNS connect string field for Apache listener Configuration I entered the same name (abc) (chapter 4 of installation guide: installing oracle 9i Application server: step2, 3: page 10,11 of 25) as I was going to use for my Global database name later at database Identification steps (chapter 4 of installation guide: installing oracle 9i Application server: step 4: page 12 of 25)
Note: In an other installation I left the same fields (TNS connect string) blank but of no use.
(Please let me know if I have made any mistake here)
When installation of Oracle9i AS reaches 100% installer opens a command prompt and displays
ORA: 12541 TNS: No Listener
Enter user name:
When I enter SYSTEM as a user name it displays
Password:
I entered manager as password and then it displays
ORA 12560: TNSProtocol adaptor error
And once again it asks for user name and password
I once again enter system as a user and manager as password.
(Please let me know if I have made any mistake here)
After 100% completion of the installation the configuration tools screen appears
(Chapter 4 of installation guide: installing oracle 9i Application server: step 10: page 17 of 25) and the following tasks are performed
Net8 configuration Assistant succeeds
Oracle database configuration assistant succeeds
When The Oracle portal 3.0 configuration Assistant Starts
I hold the installation steps for oracle portal for a while and do some database configuration tasks that are necessary (may be some are not) for installation of portal.
(Please let me know if I have made any mistake here)
For example
Increase the table space size of Users (400 MB), and Temp (100MB) table spaces.
Validated invalid PL/SQL Modules with ULTRP.SQL script
(Please let me know if I have made any mistake here)
Installed dbms_job.sql package as it was mentioned in another guide (Oracle portal-to-Go installation Guide- Release1.0.2: Page 1: last line)
(Please let me know if I have made any mistake here)
Stopped the database and listener
And did some changes as was asked in Oracle portal-to-Go installation Guide- Release1.0.2
Edited the init<SID>.ora file and set the following fields
aq_tm_processes = 1
job_queue_processes = 4 (2 were recommended in guide but I left the already set values)
job_queue_interval = 30
(Please let me know if I have made any mistake here)
Also I did the following too (though these are recommended for Internet file system)
opern_cursors = 300 (in installation guide it is asked 255 but I kept the already set value)
shared_pool_size = 52438800 (50M was suggested and this is more than that)
processes = 200
(Please let me know if I have made any mistake here)
I started the database and listener
Proceeded the installation of Oracle Portal as is described in installation guide for Oracle 9i Application guide 1.0.2.0.0
And successfully completed the installation of Oracle Portal
There were no errors reported on the installer however when I read the installation log some errors were mentioned at the end of the file
Please see the attached log file.
I also completed all the post installation tasks at the end of chapter 4 of Oracle9i Application Server installation guide 1.0.2.0.0 except the configuration of Oracle Internet file system (is it necessary for running Oracle Portal to Go)
When I run the oracle portal to go the following situation is encountered
Working: http://localhost/pls/portal30/admin_/dadentries.htm
Error at: http://localhost/pls/portal30/portal30.home
Error: The preference path does not exist: Oracle.Portal.Page (WWC-51000)
(And this is the main source of confusion)
Working: http://localhost/pls/portal30/admin_/gateway.htm?schema=portal30
Working: http://et-wks-08:5555/invoke/wm.server.admin/adminPage
Are there any other guides and post installation steps still to follow to successfully run this Portal to Go or it is sufficient?
I can also send the installation logs of both Oracle 9i application server (installActions.log and installActions2001-05-28_03-50-56-PM.log) and Oracle portal to Go (install.log).
If you ask, I can send you the installation guides that I have followed and the screen shoots of the error messages for a detail review.
Moreover can anyone please tell me if this version of Oracle 9i Application server is ok or I must try some other version?
Also advise any other if any successful configuration and installation options.
Is it possible to run this portal to go with any other installation options/arrangements/configurations etc?
Any help from anyone will be highly appreciated.
Regards,
Muhammad Usman,
Software Engineer
EssTec Lahore, Pakistan.

Hi,
If you use portal 30 instead of OAS, The installation gives you the Apache ready.
Pablo
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Tarun Singhal ([email protected]):
Hi,
I am trying to implement Portal-to-go application .
For installing Oracle Portal-To-Go 1.0.2 ,I followed oracle
documectation.Now I want to install Portal-To-Go 1.0.2
application using
a) winnt ver. 4.0 (SP3)
b) Oracle 8i
c) Oracle Application server release 4.0.8.1
d) servlet patch set
e) pl/sql cartridges.
(Oracle 8i and OAS 4.0.8.1 are installed with different oracle home directories.)
I have installed winnt , OAS rel.4.0.8.1. both are working fine
.now I want to install servlet Patch set and
pl/sql cartridges.I am unable to locate the information and software for this on oracle site.
can any body tell me why servlet patch set and pl/sql cartridges
required for this application and
from where should i download the servlet patch set software and PL/SQL cartriges
for this version.
Are the above specified softwares are compatible with each other or something extra
required for this installation. Is service pack 3 (winnt 4.0) compatible
with portal-to-go 1.0.2
Can anybody help me please ?
Regards
Preeti Madhukar
([email protected])<HR></BLOCKQUOTE>
null

SLES 8 running Oracle 9 hangs

I have Suse Linux Enterprise Server 8 on an IBM X225 server, model 8649, with two Pentium 4 Xeon processors, 1 GB memory, running Oracle 9.2.0.4. The OS has been kept up to date with patches via YOU. The system will hang from time to time with no warning, and nothing out of the ordinary written to /var/log/messages. I cannot even login at the console. It is completely frozen, and unfortunately seems to be random. It will be fine for a couple of days, and then it may lock up for two, three, four days straight. It usually has to be physically powered down and then back up to 'resolve' the issue. We have replaced both processors, the motherboard, all of the memory, and the video card, and still no luck. IBM says that with all the new components installed, it HAS to be a software issue. Any ideas?

I have similar situation: IBM xSeries 235 Type 8671, 2xXeon 3GHz, 2GB RAM, 6xSCSI HDD, etc; system is Linux Fedora Core 2 & Oracle 9.2.0.4. It works very well, no errors, no warnings, wonderful performance, but it falls 3..5 times a week (4 days without a crash is my best achievement).
I've downloaded and installed all firmware/bios upgrades available at their site, but it looks like the "reset" button is the only remedy for this server. Local TechSupport has unbreakable defence: this server, they say, has advanced built-in diagnostic (service processor, etc), so, any hardware problem would be located immediately; thus, the problem is Linux, don't use Fedora Core 2, don't use kernel 2.6.9, buy enterprise version (RHEL, SLES) and everything will be OK.
The fact is, I'm not sure enterprise Linux will change the situation. Choosing Fedora Core 2, I was ready to error messages, segmentation faults, problems with libraries. Instead, there is Oracle running smoothly, and Linux regularly throwing black screen, or, sometimes, Machine Check Exception, CPU Context Corrupt and other awful messages.
Without Oracle (or with Oracle and 3..4 users) system may work 2 weeks or more. So, it looks like Oracle is guilty. But I'd rather relate the problem to intensive memory and network usage, when 50 users work with database.
IBM web site contains contradictory information. It looks like there were problems (sudden crashes, reboots) with IBM xSeries Servers having Xeon and 533MHz FSB (no matter what OS). They've promised to repair it with BIOS update at the 3rd quarter (this year?). But the last BIOS update (1.13) is of 22-Jun-2004. Is this the one or not? I don't know. And after a month of fight with this server I still cannot deside: is this hardware or software problem? And what to do? Move to RH9? To Windows?
And above all, is that possible, that user mode application kills operating system like Linux? I accept, it can overload, slow down, cause denial of service.
But kernel panic, MCE, or just black screen...

Calling 6i reports containg oracle graphics in ias 10.1.2.0.2

Hi,
i'm having troubles calling a report containing an oracle graphics chart.
i'm using ias 10.1.2.0.2 and the corresponding forms tools. and the ias 1.0.2.2.2a isuite server.
Compiling and running the forms is not a problem and neither is caling ordinary reports. i.e reports not containing any oracle graphics. So i'm confident that my server setup is correct.
When i'm calling reports containing oracle graphics charts the reports simply hangs.
Consulting the ias server reports queue i can see that status is 'running the report, now executing pre-form trigger' and that's it. status never changes and the report never finishes.
In my ias 101202 home i've set the following environment variables:
ORACLE_GRAPHICS6I_HOME -> E:\oracle\806 which is where my oracle graphics is installed
GRAPHICS60_PATH -> e:\mastra\rep which is where i store my reports and oracle graphics charts
I keep both the .rdf file and the compiled .rep in the e:\mastra\rep directory.
Strange thing is that if i don't include the full path to the oracle graphics component in the report it's not able to find it at runtime. I can see in the reports status screen it complains about not being able to fond the chart.
what parameter should i set so i don't have to hard code the path to the graphics chart?
If i include the full path to the chart it probably finds it because it doesn't complain but now it hangs telling me that it's running the preform trigger. and then nothing happens.
please help me cause im stuck here.
thanks for any input.
br
kim gabrielsen

Hi Frank,
Our reports are all called from Forms...using RUN_REPORT_OBJECT in the 10g environment. We have hundreds of reports (6i based) that all work fine when run on the 10g app server. The only ones that fail to complete are those that have Graphics embedded. Yet they work just fine when run Client/Server under 6i. On the 10g app server they just run forever/get hung.
If I launch Graphic 6i Builder on the 10g App Server box, I can connect to the database without any problems. And Graphics 6i do run just fine from my 10g forms (converted from 6i Forms) on the App Server. NOTE: My Graphics 6i uses the same tnsmanes.ora and sqlnet.ora that my App Server uses (via a TNS_ADMIN setting in the Windows registry)
Is there something extra special I need to do in the report itself?
Thanks,
John

Calling 6i reports containg oracle graphics in ias 10.1.2.0.2 from forms

Hi,
i'm having troubles calling a report containing an oracle graphics chart.
i'm using ias 10.1.2.0.2 and the corresponding forms tools. and the ias 1.0.2.2.2a isuite server.
Compiling and running the forms is not a problem and neither is caling ordinary reports. i.e reports not containing any oracle graphics. So i'm confident that my server setup is correct.
When i'm calling reports containing oracle graphics charts the reports simply hangs.
Consulting the ias server reports queue i can see that status is 'running the report, now executing pre-form trigger' and that's it. status never changes and the report never finishes.
In my ias 101202 home i've set the following environment variables:
ORACLE_GRAPHICS6I_HOME -> E:\oracle\806 which is where my oracle graphics is installed
GRAPHICS60_PATH -> e:\mastra\rep which is where i store my reports and oracle graphics charts
I keep both the .rdf file and the compiled .rep in the e:\mastra\rep directory.
Strange thing is that if i don't include the full path to the oracle graphics component in the report it's not able to find it at runtime. I can see in the reports status screeen it complains about not being able to fond the chart.
what parameter should i set so i don't have to hard code the path to the graphics chart?
If i include the full path to the chart it probably finds it because it doesn't complain but now it hangs telling me that it's running the preform trigger. and then nothing happens.
please help me cause im stuck here.
thanks for any input.
br
kim gabrielsen

Hi Frank,
Our reports are all called from Forms...using RUN_REPORT_OBJECT in the 10g environment. We have hundreds of reports (6i based) that all work fine when run on the 10g app server. The only ones that fail to complete are those that have Graphics embedded. Yet they work just fine when run Client/Server under 6i. On the 10g app server they just run forever/get hung.
If I launch Graphic 6i Builder on the 10g App Server box, I can connect to the database without any problems. And Graphics 6i do run just fine from my 10g forms (converted from 6i Forms) on the App Server. NOTE: My Graphics 6i uses the same tnsmanes.ora and sqlnet.ora that my App Server uses (via a TNS_ADMIN setting in the Windows registry)
Is there something extra special I need to do in the report itself?
Thanks,
John

Problem with Oracle graphic display in forms 10g

I'm upgrading a form from 6i to 10g. The form displays a chart and so far I cannot get it working when I run it from developer 10g. I have tried both run_product and og.open. The og.open causes error FRM-40735: WHEN-BUTTON-PRESSED trigger raised unhandled exception ORA-06508. Run_product doesn't cause the error but still nothing is displayed. Below is the code:
run_product(graphics,'c:\orant\bin\actact.ogd',synchronous,batch,filesystem,plist,'block3.chart_area4');
og.open('c:\orant\bin\actact.ogd','block3.chart_area4',TRUE,TRUE,plist);
How can I determine what is causing this problem? Thanks in advance for your help.

Hi Frank,
Where do I explicitly provide the tnsnames entry to Graphics?
We are using SSO when running Form, the db connect string are store in each user resource of OID, where resource type = OracleDB. Also Neither the existing form (calls the
*.ogd) nor *.ogd has tnsnames/db connect code.
As for the actual TNSNAME setup, we have local env var -TNS_ADMIN w/value of "D:\Oracle\MidTiers\network\admin".
That we want all three oracle homes: Infra10g, MidTier10g, Dev6i use the D:\Oracle\MidTiers\network\admin\tnsnames.ora, sqlnet.ora.
Apparently, Graphics in D:\Oracle\Dev6i doesn't pickup
the TNSNAME setting @ Midtiers
Can you give us some pointers on this? thank you in advance!!!
-Kan

Running oracle graphics in 2.5 that were developed in 3.0

Similar Messages

Maybe you are looking for