Running out of Space with Final Cut Pro X 10.1.1

I have a 1 TG external hard drive that I have been using for the FCPX Library.
I check the properties and it is using 657.72GB of space. I have deleted all movies, files, music with on FCPX. I clearned the trash can and restarted my system and FCP Library file is still showing 657.72GB being used. I have a blank project FCP will not let me delete because it says you have to have at least one.
Has anyone else run into this problem. I am running out of space to do my video's and this is really annoying.
I really appreciate your help

You deleted all your movies? How did you do that? And what do you mean by movies? Do you mean the clips that you imported into FCP? When you imported, was it from a camera's memory card or from your computer? And do the clips exist anywhere else on your computer?
Sorry about all the questions, but just trying ensure that there are no misunderstandings due to terminology issues that might lead to problematic advice.
Russ

Similar Messages

General error and out of memory with Final Cut Pro 6

I just upgraded to a Mac mini i7. What setting should I use to avoid these errors?

So you were successful in getting FCS 2 apps installed in Mountain Lion?
Are these messages you're getting now or ones that you have gotten in the past using FCP?
Out of memory warnings often caused by still images that are not RGB or trying to use unsupported media.
Russ

I updated to yosemite os and was in the middle of a project with final cut pro 10. Now it says final cut pro is incompatible. How can I access my project and/or update final cut?

I updated to yosemite os and was in the middle of a project with final cut pro 10. Now it says final cut pro is incompatible. How can I access my project and/or update final cut?

There is this offer of a trial version FC Pro X with 30 day runtime:
http://www.apple.com/final-cut-pro/trial/
Too bad you didn't have a complete backup that could run the previous OS X
and then you could resume using an earlier Final Cut Pro (10) or (7) since a
clone would have been a means toward that position.
http://www.apple.com/support/finalcutpro/
http://www.apple.com/support/pro-apps/
This appears to be another good reason to check out all the reasons why one
would want or need to upgrade a working OS X version, since these kinds of
events are known to happen as a direct result.
Sorry to not have an answer to this, other than try & use the Trial version...
Or see if someone at Apple sales/support can field your issue w/ an answer.
Good luck & happy computing!

ATY radeon x1900 not compatible with Final Cut Pro X ???

It looks like my ATY radeon x1900 Graphics card is not compatible with Final Cut Pro X and the new motion and compressor?
I have a Macpro 2 x 3Ghz quad core Intel Xeon with 16gb RAM
Any suggestion to which card I should Purchase?

There are several threads here and abroad that mention the installer will notice and approve the ATI 5770 in older mac pros.
I just now bought a 5770 from Apple's online store for my 2007 Mac Pro 2,1 so I'd have the compatibility if I ever decided to upgrade -- assuming at some point they'll run out of stock and not make any more.
Keep in mind the 5770 has 1 dual link DVI and 2 mini display ports so you might need to pick up necessary adapters depending on your monitors.
Hopefully FCPX will be usable in the near future and an upgrade will be pragmatic.
(I sure hope they don't pull this stunt with the next Logic upgrade.)
I may have a 1900XT for sale soon.

Your experince with final cut pro vs adobe premiere?

I am just wondering about your experience with final cut pro and adobe premiere and which you like better and why. Thank you.

dorian86 wrote:
I am just wondering about your experience with final cut pro and adobe premiere and which you like better and why.
I've posted this in other threads here: I've tried the Final Cut Pro X 30 day trial on my old Mac Pro 5,1 (heavily modified) and my new Mac Pro 6,1 (8-core, D700s). I have a specific benchmark that I run on an NLE when I'm testing it: how long does it take to export one of my movies to a 720p h.264 MP4?
If we assume the length of the movie is represented by 't' (for time) -
The old Mac Pro and Final Cut Pro X 10.0: 2t
The new Mac Pro and new Final Cut Pro X 10.1: 1/2t + epsilon
The old Mac Pro and Premiere Pro CC: 1/2t + epsilon
The new Mac Pro and Premiere Pro CC: 1/2t - epsilon
The newer version of Final Cut Pro X is substantially faster at exporting my movie than the older version. But Premiere is still faster than it is. Also, Apple still can't get the whole "edit the source footage raw" bit right; my source footage is all spanned-clip AVCHD, with files that are over 4G a piece. FCPX can't just open those raw, it insists on putting a MOV wrapper around the footage. There's no transcoding happening, but the file I/O for those massive files slows the whole process down significantly.
Because I don't have years of experience editing with NLEs, I'm not married to any particular UI. FCPX's UI is ... strange, but I didn't find it too difficult to become used to it. If it were faster and more efficient for what I do, I'd reconsider it. But for now, it's all Premiere.

Burning a DVD with Final Cut Pro 10 stops at 95%, why ?

Burning a DVD with Final Cut Pro X stops at 95%, why ?

Stops completely? Mine stopped at 95% for quite a few minutes then finished. This is usually the time in the process where the lead out is being burned and it will not show progress for some time. If it is taking more than 10 to 15 minutes from that point you may have another problem.
stephen

Importing issues with Final Cut Pro X. Green flash and twitches while play back

Hello, I'm having some importing issues with Final Cut Pro X and I can't find any solution whatsoever. Perhaps my importing settings are wrong?
Anyways, I've done a lot of recordings on eye TV and HD PVR with some videos that are about 3 hours long. I exported them into H.264 files, which turns them into mpeg-4 files with AAC audio. Then I import them into final cut pro X and I notice it takes a long time for them to render the videos and I notice that there are some green screens and twitches while I play through the video.
Here is a screenshot of the green screen that I'm talking about:
[URL=http://imageshack.us/photo/my-images/688/screenshot20130409at338.png/][IMG]http://img688.imageshack.us/img688/4537/screenshot20130409at338.png[/IMG][/URL]
Could it be my 2 video graphics card that is causing this kind of issues? Or is there any solution to fix this?
In the past, I've used iMovie 09 and it worked out perfectly. However, the new iMovie 11 is terrible because it automatically optimzie my 3 hour long videos into making the importing process to (144 hours long to import). Is there any way to get iMovie 09 back or am I stuck on dealing with this Final Cut Pro X issues?
More information:
My Hauppauge HD PVR settings are set to custom. Video Constant Bit Rate, the average bit rate: 13.5 Mbps. The audio is AAC.
My project settings for video properties is set to custom, 720P HD Format, 1280 x 720 Resolution and 30P Rate. The audio and render properties is set to custom, audio channels is stereo, audio sample rate is 48kHz and the Render Format is Apple ProRes 422.
I export the video as a quicktime movie. The export setting is H.262.
The summary of the export is:
File type: Quicktime movie
Estimated size: 397GB
H.264, Width and height: 1280 x 720. Framte rate: 30 fps

My Hauppauge HD PVR settings are set to custom. Video Constant Bit Rate, the average bit rate: 13.5 Mbps. The audio is AAC.
My project settings for video properties is set to custom, 720P HD Format, 1280 x 720 Resolution and 30P Rate. The audio and render properties is set to custom, audio channels is stereo, audio sample rate is 48kHz and the Render Format is Apple ProRes 422.
I export the video as a quicktime movie. The export setting is H.262.
The summary of the export is:
File type: Quicktime movie
Estimated size: 397GB
H.264, Width and height: 1280 x 720. Framte rate: 30 fps

Is Mt. Lion compatible with Final Cut Pro 7?

I am currently running Lion (10.7.5) on a 27" iMac 3.4 Ghz.
Is Mt. Lion compatible with Final Cut Pro 7 and FCS 3? Will these programs still run or will they be not supported by the new OS as has been the case with past apps when a new OS is introduced?
Thanks,
Phil

I have a 2gig HD for backing up my system HD . The backup HD is partitioned into 20 - 1 gig partitions. I use the Carbon Copy Cloner app to make a clone copy of the system HD. Never had a problem. If I need to I can boot from one of the clone partition or copy file from.
(Just make sure your FPC media and video files are on a external HD (firewire for example) other than a USB 2 HD. FCP does't work properly with USB 2 drives.)

Error messages during editing with Final Cut Pro

Hello,
I am working with Final Cut Pro for the first time, editing my first indie movie project. The software normally works fine and when I started this project it ran fine for a while. But the software is now operating increasingly slow, to the point where it won't let me advance frame by frame. And I am getting several error icons popping up in the viewer window and the clip window to the right and I don't know what they mean. One of the icons is a little yellow triangle with a black exclamation point in the middle. Another is a little whi circle with a black letter x in the center. Another is a small green circle with a check in it. Does anyone know what any of this means? Could I be out of ram on the hardrive? I noticed that the changes occurred as soon as I did ctrl + z to undo an edit - it went haywire right after that. I would greatly appreciate any tips, thoughts, suggestions. Thank you.

Slow performance can come from a number of different things. Without knowing more detailed information about your setup or workflow, it's difficult to accurately troubleshoot.
-What kind of Mac are you using?
-What is your source format?
-Where is your source footage located?

Where can I download Christmas generators / title cards compatible with Final Cut Pro X?

I'm looking for title cards with holiday themes, snow, Christams trees, ornaments and the like. Where can I find these? A quick search online I found site that said they weren't compatible with Final Cut Pro X.
I went to rippletraining.com and after downloading got this error message...and yet I am unable to find any applications in the App store that meet my needs.

kristydrums wrote:
Okay, this seems out of my league! …
you haven't tried!
you managed to handle FCPX, a highly professional edit-tool.
What I suggested, is just 'basics':
compose a few elements.
Get inspired by other videos you notice around.
To animate 'elements', use keyframes.
To apply 'overlays', green-screen/color-key is a basic procedure…
To prep stills, a designated pic-processor is of fundamental need… although, even MacOS built-in Preview.app allows creation of 'knock-outs'/transparency… in case, you're shy to invest a few $$ for Pixelmator.
It looks maybe complicated - it isn't!
Don't try it first time for some serious projcect… but creating your very own Xmas-scenery is a lot of fun… plus, you learn a lot about FCPX and its many hidden gems…
Final word:
Catch some nice, own pics with your cam! … snowy trees, 4 candles and some cookies, a frozen window, illuminations in the streets, that crazy neighbour with his 50.000Watts of garden decorations .... Just add a charming title - done. Simplicity rules! …
Merry Chistmas!

How well will a 15.4-inch MacBook Pro 2.0GHz Quad-core Intel i7 work with Final Cut Pro X for video editing 4K

How well will a 15.4-inch MacBook Pro 2.0GHz Quad-core Intel i7 work with Final Cut Pro X for video editing 4K

It will work just fine. I would max out the RAM

Is Mavericks compatible with Final Cut Pro 7 and the rest of Studio 3?

I still use FCP 7 and limp along, but recent updates of FCP X are encouraging. Until I'm ready to take the plunge, would someone tell me if there's been any feedback re Mavericks' compatibility with Final Cut Pro 7 and the other software in the Studio 3 Suite - especially Compressor and DVD Studio Pro? I'd love to dl Mavericks but not if there are compatibility issues.
Thanks ~

Going from SL to Lion is not advised. Start clean.
Install Lion. Run updates. Install FCS. Run updates.
x

Editing HDCAM with final cut pro 6?

Hi all,
We have been offered some post work on a music video shot in HDCAM, we use Final cut pro 6 and have a HDCAM capture deck (Sony J-H3 (JH3) HDCAM Compact Player), I am in the process of researching this work flow.
Would any one be able to shed some light on editing HDCAM in final cut Pro 6, the settings, things to look out for, and the overall work flow,
i very much appreciate your help
The mac to be used is a Mac Pro, mac os x 10.5.6 with final cut pro 6, duel core intel 2.66 Ghz, 8 GB memory, 2 NVIDIA GeFource 8800GT, with a 3 TB of internal HD Space

we don't take in HDcam, but we do use it for output archive and transmition.
the workflow we use is, Shoot in AVCintra 50 onto P2 cards transfer into FCP 6
edit in Apple Pro Res 1080i50 and output to HDcam via an AJA Kona card sending out as HD-SDI
ian

Does compressor 4 work with final cut pro 7?

does compressor 4 work with final cut pro 7?

Russ H wrote:
WHile I'm not 100% certain (this has come up before and It's not convenient to test), I believe that purchasing Compressor will also allow you add additional codecs to your QT library.
Russ
Yes, Compressor adds several codecs, which can also be used in FCE (decoding and encoding using QuickTime Conversion) and in QuickTime player. Most notably these are MPEG-2 and ProRes. The latter is an editing-friendly Intraframe-Codec useful for preprocessing stuff for importing clips to FCE, particularly if it has a different framerate from the FCE project.
I'm also still using FCE 3.5(*) and the "Export using Compressor" menu option remains grayed out, which is a pity, but the new codecs can still be used. I mostly use it to make stuff for DVDs, using my ancient and cumbersome iDVD.
(*) It really works on Lion, provided you have installed it on a previous Mac OS release and then migrated or upgraded to Lion: the installer is a PowerPC program, but the installed program is Universal and works fine and very stable. If you already have Lion, and no older (Snow) Leopard machine, it's going to be more of a challenge, since the Lion kernel no longer supports PowerPC binaries, so Rosetta won't work.
Bernd

Does Canon XF100 work well with Final Cut Pro

Does the Canon XF 100 work well with Final Cut Pro 7.03

I have read the information about this camera and I have looked at several discussion groups. Apparently you cannot edit in native format with this camera. This has been confirmed to me by a Canon rep. You have to bring in footage thru log and transfer which means it takes more time as it converts. I have never had to do this before. Because I have always imported thru log and capture. So because I was wondering if anyone out there can tell me if they are using the camera and if it works well inspite of it. Or anyone has a better camera recommendation but in the price range of the XF100.
Thanks,

Running out of Space with Final Cut Pro X 10.1.1

Similar Messages

Maybe you are looking for