Error messages during editing with Final Cut Pro

Hello,
I am working with Final Cut Pro for the first time, editing my first indie movie project. The software normally works fine and when I started this project it ran fine for a while. But the software is now operating increasingly slow, to the point where it won't let me advance frame by frame. And I am getting several error icons popping up in the viewer window and the clip window to the right and I don't know what they mean. One of the icons is a little yellow triangle with a black exclamation point in the middle. Another is a little whi circle with a black letter x in the center. Another is a small green circle with a check in it. Does anyone know what any of this means? Could I be out of ram on the hardrive? I noticed that the changes occurred as soon as I did ctrl + z to undo an edit - it went haywire right after that. I would greatly appreciate any tips, thoughts, suggestions. Thank you.

Slow performance can come from a number of different things. Without knowing more detailed information about your setup or workflow, it's difficult to accurately troubleshoot.
-What kind of Mac are you using?
-What is your source format?
-Where is your source footage located?

Similar Messages

  • I have a Sony HVR-V1P, can i successfully capture and edit with Final Cut Pro X

      I have a Sony HVR-V1P, can i successfully capture and edit with Final Cut Pro X

    My HVR-A1U was able to capture just fine.  The only issue I had is that it has mroe frequently than FCP 7 ever did find Timecode breaks and split my clip apart.  I never had breaks before, so while it is possible I had them on this latest tape, I think X is just more picky.  I mean heck, it found three in a one minute timeframe.  My A1U worked with X without me needing to adjsut any settings form how I had it setup for 7.

  • 2012 mac mini i7 or imac i5 for video editing with final cut pro 7 ?

    Hello,
    I am totally new to mac world.
    I read some posts but not clear to me if better a mac mini 2012 i7 2,3Ghz and video card  Intel HD Graphics 4000 or an imac 2012 i5  2,7GHz and NVIDIA GeForce
    GT 640M   with 512MB of GDDR5 memory.
    The software is final cut studio 3 from final cut pro 7.
    So better more performance in the l cpu or  in the videocard?
    Thank you
    Gianni

    If the Mac Mini has not had its hardware changed since the release of Mountain Lion, July 25, 2012, Final Cut Pro 7 is reported as not working in some situations under Mountain Lion.  If it has been hardware changed by Apple on or after July 25, 2012, you won't be able to run Lion, and may not be able to run all Final Cut Pro 7's features.  The two entries for Final Cut Pro 7:
    http://roaringapps.com/app:4449
    and
    http://roaringapps.com/app:4909
    Appear to conclude it launches, but there must be something that doesn't work.  There are some issues both with Lion and Mountain Lion with Final Cut Studio 3:
    http://roaringapps.com/app:1384
    My advice, check the Final Cut forums to see what people have experienced with both.  And make sure to follow specs exactly.

  • I get this message often with final cut pro 7 "Autosave: File Error: Unknown file?

    I get this message often with final cut pro 7 "Autosave: File Error: Unknown file?

    Is you're autosave folder on a drive that's not formatted macosextended?  You set the location for the autosave folder in system settings which can be found in the FinalCutPro Menu.  Also, the best way to trash fcp preferences is using Digital Rebellion's Preference Manager
    https://discussions.apple.com/docs/DOC-2491

  • How well will a 15.4-inch MacBook Pro 2.0GHz Quad-core Intel i7 work with Final Cut Pro X for video editing 4K

    How well will a 15.4-inch MacBook Pro 2.0GHz Quad-core Intel i7 work with Final Cut Pro X for video editing 4K

    It will work just fine. I would max out the RAM

  • Editing HDCAM with final cut pro 6?

    Hi all,
    We have been offered some post work on a music video shot in HDCAM, we use Final cut pro 6 and have a HDCAM capture deck (Sony J-H3 (JH3) HDCAM Compact Player), I am in the process of researching this work flow.
    Would any one be able to shed some light on editing HDCAM in final cut Pro 6, the settings, things to look out for, and the overall work flow,
    i very much appreciate your help
    The mac to be used is a Mac Pro, mac os x 10.5.6 with final cut pro 6, duel core intel 2.66 Ghz, 8 GB memory, 2 NVIDIA GeFource 8800GT, with a 3 TB of internal HD Space

    we don't take in HDcam, but we do use it for output archive and transmition.
    the workflow we use is, Shoot in AVCintra 50 onto P2 cards transfer into FCP 6
    edit in Apple Pro Res 1080i50 and output to HDcam via an AJA Kona card sending out as HD-SDI
    ian

  • Editing with Standard Footage (DV) with Final Cut Pro X

    It is possible to edit with Standard Footage (DV) with Final Cut Pro X? How? Thanks for your kind responses

    The usual way is to make a new project and have the settings based on the video. You make the project, put a DV file in it, and the project properties will be set. If you don't have a DV file to use, you make a new project, use custom settings and select the format you want NTSC or PAL, anamorphic or 4:3.

  • Error messages I when install final cut studio on my Macbook Pro

    Why am I getting error messages, I when install final cut studio on my Macbook Pro?  The Mac book Pro is a 2.5 ghz 17'.  The software; FC Studio is about a year old.
    Boe

    What error message(s) are you getting?
    Also, if you don't get an answer here, you might post in the FCS discussion.

  • Where can I download Christmas generators / title cards compatible with Final Cut Pro X?

    I'm looking for title cards with holiday themes, snow, Christams trees, ornaments and the like. Where can I find these? A quick search online I found site that said they weren't compatible with Final Cut Pro X.
    I went to rippletraining.com and after downloading got this error message...and yet I am unable to find any applications in the App store that meet my needs.

    kristydrums wrote:
    Okay, this seems out of my league! …
    you haven't tried!
    you managed to handle FCPX, a highly professional edit-tool.
    What I suggested, is just 'basics':
    compose a few elements.
    Get inspired by other videos you notice around.
    To animate 'elements', use keyframes.
    To apply 'overlays', green-screen/color-key is a basic procedure…
    To prep stills, a designated pic-processor is of fundamental need… although, even MacOS built-in Preview.app allows creation of 'knock-outs'/transparency… in case, you're shy to invest a few $$ for Pixelmator.
    It looks maybe complicated - it isn't!
    Don't try it first time for some serious projcect… but creating your very own Xmas-scenery is a lot of fun… plus, you learn a lot about FCPX and its many hidden gems…
    Final word:
    Catch some nice, own pics with your cam! … snowy trees, 4 candles and some cookies, a frozen window, illuminations in the streets, that crazy neighbour with his 50.000Watts of garden decorations .... Just add a charming title - done. Simplicity rules!  …
    Merry Chistmas!

  • I have a Benq M22 HD cam. Is it compatible with Final Cut pro 7?

    I have a Benq M22 HD cam. Is it compatible with Final Cut pro 7?

    Hi Nick, thanks for your help, Im rather new at editing and FCP. I did everything as it said to do in the MPEG Streamclip download tutorial, but when it finished, I tried to open the .mov files and it was just sound but no picture, just black.
    Now, another thing, the .mov converted files where saved into mi SD card after the program was done (is that ok, or should they have been saved somewhere else too?)  then i tried to put them into my FCP by using the Log and Transfer and when I selected that it gave me this message: "100MEDIA" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media.
    Help please!! I know that these problems are probably from my lack of knowledge on the program and the whole thing.. but im working on it!!
    Thanks!!

  • Converting Nokia N95 video for editing in Final Cut Pro?

    I have some .mpeg4 videos shot with a Nokia N95 mobile phone that I want to edit in Final Cut Pro.
    I read everywhere that .mpeg4 is not an "editing format".
    I want to use Quicktime Pro (or Mpeg Streamclip) to convert the footage to something I can use in FCP *without degrading the original quality* but I am completely lost as to what settings I should use.
    Can anyone point me in the right direction? I have done some test conversions but a side by side comparison in Quicktime of the original and converted footage showed the latter to be softer, less contrasty and with different colours. Not at all what I wanted.
    I've posted this question on th eFCP and iMovie forums but haven't had any definitive replies. Is this really so complicated?
    Thanks in advance!

    I've been using iMovie 09 with these files but because the image quality is pretty poor I need the image correction functions of FCP. I can import the .mpeg4 files to FCP OK and work with them but I seem to spend all my time rendering. This is why I began to wonder if my initial file format and sequence settings were what they should be (and I am completely lost here).
    The edited film will be uploaded to blip.tv and then embedded in websites. My concern is not to degrade the quality during my workflow.

  • A Case Study Question in the Use of Stills with Final Cut Pro

    Believe it or not, for the last week I have been reading endlessly about pixels, resolution, aspect ratio, Photoshop resizing, the bloody battle over the usefulness of the term "dpi" in video discussions, and generally about what one should do in order to use still images in a film edited in Final Cut Pro. And yet, though I have a PhD from an Ivy League university, and can understand a lot of things, I am sorry to say I am still at a loss.
    Much of the discussions of photos on forums like this one are either quite technical or broadly philosophical. But my questions are completely practical and specific. I am not a photographer or a printer, nor am I an experienced editor. I am just a fairly smart person trying to use photos in his film. So I am going to ask some specific questions and hope for specific answers, without any philosophical waffling or technical mumbo jumbo.
    I have one of those HP all in one printer/fax/scanner machines. I am told this device, while not fancy, is perfectly adequate to the task. Some of my photos I scan with this device from prints. Some of them I get from other people. (I have stopped downloading photos from the web, as the quality is nearly always poor.) I have Photoshop Essentials (not Photoshop). I am making a 90-minute HDV documentary, 16x9. The doc is mostly HDV footage with a still here and there. I want to be able to move on the photos (zoom, pan, etc.). I want, obviously, for them to look good. My sense is that the work flow is: (a) scan the photo (or obtain from some source as a digital file); alter the photo in some way in Photoshop; and (b) import the photo into your FCP project.
    Question #1: If I have a 6x8 print, what settings should I scan it in with -- is it possible there really is no difference between scanning in it at 72dpi and 300dpi? Is it really all about the dimensions of the image? Isn't a photo whose dimensions are enlarged in Photoshop to make it available for panning and zooming in my sequence going to look fuzzier and more pixelated if it was originally scanned at 72dpi than at 300dpi? Also: Does it matter if I save it as a jpeg or tiff? Bottom line: What settings do I use in my scanning software when I scan a photo for this purpose?
    Question #2: Once I have the image file on my hard drive, I suppose I now have to load it into Photoshop Elements and do something to it. What is it exactly I am using this program for? I'm going to take a wild guess. I use PS Elements to (1) crop the photo so that it has a 16x9 aspect ratio, and (2) resize it so that I can do pans and other Ken Burnsy moves on it in FCP. Bottom line: What exactly do I do in PSE to the photo and what settings do I use to both (a) make it available for moves and (b) not injure the quality of the photo by increasing its dimensions?
    (In passing, I will say that I have done experiments that show that if I increase a photo's dimensions to, say, 4000 pixels by 2000 pixels, the photo's quality definitely and obviously suffers. I don't understand how a picture can be increased in size without losing sharpness. So, what am I doing wrong? Is this a function of it having been scanned in improperly to begin with?)
    Question #3: If I am obtaining a photo from an outside source -- say, a professional photographer -- what are the specifications I ask for in both a hard print and a photo file? If the former, what dimensions do I ask for? If the latter, do I specify resolution and dimensions and file type?
    These are my questions. At this point, I really don't want to know WHY any of this is the way it is. I just want someone to say: "Do this; do this; and then do this."
    Thank you very much.

    Studio X is absolutely correct; while DPI has no meaning in the video world, it often has significant meaning in scanning (and, of course, printing). If your scanning program only allows image size adjustments in DPI, then you'll have to adapt to that ... keeping in mind that the scanner's DPI setting directly relates to pixel resolution. And it is pixel resolution (not DPI) that will make all the difference in the world for images used in video. You can test this yourself by scanning an image at 1000 x 1200 @ 72 DPI and again at 1000 x 1200 at 300 DPI. They will look identical on TV or projection as long as the pixel resolution remains the same.
    As an example, my Epson scanning software allows me to adjust image size by DPI or pixel resolution. Wanting to maintain the correct aspect ratio for the image area that I'm scanning, I adjust the DPI setting which in turn adjusts the pixel resolution automatically. But it doesn't work the other way around; if I adjust the pixel resolution settings manually, the DPI setting does not change. Your software may vary.
    As Jim Cookman suggested, a scan setting of 300 DPI works well for most images ranging from 3 x 5 to 4 x 6 (typical snapshot size) in a DV Sequence. I may scan smaller images at 400 or 600 DPI and larger images (8 x 10 and up) at 150 DPI. Other size images fall in between those numbers. But I'm constantly watching the pixel resolution numbers to make sure I'm getting what I'll need to support the animation I intend to apply to the images once in FCP. Also bear in mind that I don't always scan the entire image. I only scan the area of an image that I intend to use in my program.
    So the answer is that it all depends on your scanner's software and how far you plan to push into an image once in FCP. Do a few experiments ... you're a bright fellow so it shouldn't take long for you to find the formula that suits your purposes.
    I haven't edited an HD Sequence using images yet, so I cannot offer definitive pixel resolutions for you there.
    On to your specific questions:
    1. See above. There is no one correct answer It all depends on what you intend to do with the image once it's in FCP. If you only plan to push in about 10%, you won't need much higher resolution than the equivalent of your FCP Sequence resolution. If you plan to push in further, you'll need a higher resolution to support that move.
    2. I've been doing these for many years (SD Sequences only) and I've never loaded them into Photoshop first. I import the entire folder into FCP and drop it on the Timeline so I can see what the images look like on TV; unless your program is for CD-ROM or web delivery, that's where it counts. When you place them on the Timeline, FCP will automatically scale to your Sequence settings and pixel aspect ratio. If I see that some of them need adjustment using an external editor such as Photoshop, then and only then do I use that program. And by the way, if you have a vertical image and a 16 x 9 aspect ratio in FCP, how do you propose to crop it to fit? Perhaps you meant another term instead of "crop."
    3. If it's a print, it won't matter what size they supply because you'll control the image size when scanning. If it's a file ... once again, the size (pixel resolution) depends on what you intend to do with the image once in FCP.
    I really don't want to know WHY any of this is the way it is. I just want someone to say: "Do this; do this; and then do this."<<</div>
    With that attitude, how did you ever earn a PhD from an Ivy League university? But if that is truly all you want, you might consider hiring an experienced editor to do it for you.
    -DH

  • Plz give me work flow of film editing in Final Cut Pro..

    Hello Everyone...
    I am basically a Avid Film Editor. Past 2 years I am using Final Cut Pro. Recently I finished Final Cut Pro Level 1 & T3. Right now I am working as a App. Support Engineer specially for Final Cut Pro .
    I want know the work flow of film editing in Final Cut Pro. I am very interested to do film editing in FCP but the workflow from Avid to FCP its totally different.
    I tried few options like using FCP & Cinema Tools..
    1. Captured 25fps clips and cofirmed to 24fps in cinematools.
    2. In FCP the Timeline frame rate is 24fps
    But I am not able to understand..
    1. What is Database?
    2. Cant we capture 24fps in FCP?
    3. How to Synchronize captured clips with Cinema Tools database?
    4. How to link the captured clips in to Cinema Tools database?
    5. Where do I enter the KN Start & KN End?
    6. What about Pull List & Cut List?
    Please give me the details of film technics in Final Cut Pro....
    Thanks in advance....

    I knew I'd find this same post here. That makes three versions of trhe same list of questions.
    Posting three times here implies you have posted this set of questions in many other FCP forums around the Net. If that is so, do us all the kindness of returning to all of them and closing them. Include the suggestions you have received and the solutions that were successful for you. That way your multiple threads will show up on search inquiries when other confused FCP newbies try to start complex film projects.
    It's a bummer you cannot find these answers in the FCP manuals, I'm usre you looked there first. But, since we run on volunteers around here, it may be several days before someone with enough practical CinemaTools experience can stop by and handle them for you. Please have some patience.
    bogiesan

  • Your experince with final cut pro vs adobe premiere?

    I am just wondering about your experience with final cut pro and adobe premiere and which you like better and why. Thank you.

    dorian86 wrote:
    I am just wondering about your experience with final cut pro and adobe premiere and which you like better and why.
    I've posted this in other threads here: I've tried the Final Cut Pro X 30 day trial on my old Mac Pro 5,1 (heavily modified) and my new Mac Pro 6,1 (8-core, D700s).  I have a specific benchmark that I run on an NLE when I'm testing it: how long does it take to export one of my movies to a 720p h.264 MP4?
    If we assume the length of the movie is represented by 't' (for time) -
    The old Mac Pro and Final Cut Pro X 10.0: 2t
    The new Mac Pro and new Final Cut Pro X 10.1: 1/2t + epsilon
    The old Mac Pro and Premiere Pro CC: 1/2t + epsilon
    The new Mac Pro and Premiere Pro CC: 1/2t - epsilon
    The newer version of Final Cut Pro X is substantially faster at exporting my movie than the older version.  But Premiere is still faster than it is.  Also, Apple still can't get the whole "edit the source footage raw" bit right; my source footage is all spanned-clip AVCHD, with files that are over 4G a piece.  FCPX can't just open those raw, it insists on putting a MOV wrapper around the footage.  There's no transcoding happening, but the file I/O for those massive files slows the whole process down significantly.
    Because I don't have years of experience editing with NLEs, I'm not married to any particular UI.  FCPX's UI is ... strange, but I didn't find it too difficult to become used to it.  If it were faster and more efficient for what I do, I'd reconsider it.  But for now, it's all Premiere.

  • I'm a bit confused. Since my original camera format was 720/60p, and I converted the footage to Pro Res422 in order to edit in Final Cut Pro 7, should I convert back to a higher quality format before sending the file to DVD Studio Pro?

    I'm a bit confused. Since my original camera format was 720/60p, and I converted the footage to Pro Res422 in order to edit in Final Cut Pro 7, should I convert back to a higher quality format before sending the file to DVD Studio Pro? If so, which Compressor codec is best to use in order to preserve the original 720/60p?   How do I maintain the highest quality?

    No...ProRes is a high quality format. Finishing format.  Many TV networks take that as a final deliverable. 
    BUT...DVDs aren't high definition...they are SD.  You cannot make a 720p60 DVD with DVD Studio Pro.  Any DVD you make will be SD...720x480.  The only HD DVD format out there is BluRay, and for that you need a BluRay burner.
    As for making a high quality DVD...using the BEST QUALITY settings in Compressor will work:
    #42 - Quick and dirty way to author a DVD
    Shane's Stock Answer #42 - David Roth Weiss' Secret Quick and Dirty Way to Author a DVD:
    The absolute simplest way to make a DVD using FCP and DVDSP is as follows:
    1. Export a QT movie, either a reference file or self contained using current settings.
    2. Open DVDSP, select the "graphical" tab and you will see two little monitors, one blue, one green.
    3. Select the left blue one and hit delete.
    4. Now, select the green one, right click on it and select the top option "first play".
    5. Now drag your QT from the browser and drop it on top of the green monitor.
    6. Now, for a DVD from an HD source, look to the right side and select the "general tab" in the track editor, and see the Display Mode, and select "16:9 pan-scan."
    7. Hit the little black and yellow burn icon at the top of the page and put a a DVD in when prompted. DVDSP will encode and burn your new DVD.
    THATS ALL!!!
    NOW...if you want a GOOD LOOKING DVD, instead of taking your REF movie into DVD SP, instead take it into Compressor and choose the BEST QUALITY ENCODE (2 pass VBR) that matches your show timing.  Then take THAT result into DVD SP and follow the rest of the steps.  Except you can choose "16:9 LETTERBOX" instead of PAN & SCAN if you want to see the entire image.

Maybe you are looking for