Running Rules in 11.1.2.2 workspace webforms - issues

We are currently trying to migrate from 11.1.1.3 to 11.1.2.2
Our business rules were migrated to Calc Manager. Most of our rules are run from a web form with two options on the web form: "Use Members on Form" and "Hide Prompt". They have been running this way without issue in 11.1.1.3 for years.
However, in 11.1.2.2 it's like playing a slot machine. Sometimes the web form runs the right rule. Sometimes it runs a completely different rule, one not even attached to that web form! Sometimes it shows you the prompts when it shouldn't. Sometimes it uses Members on Form. Sometimes it brings up the prompt window when it shouldn't. Sometimes it brings up the prompt window with an entirely different member than on your form. Sometimes everything works as it should -- often on the first web form and the first rule. Often, but not always. It's random, repeatable, but random. Sometimes after it has repeatedly messed up I'll go to a different form and it will work and run the right rule.
Sometimes we even get an error where it brings up the prompts when it shouldn't, has a valid member there, but it tells you the member is invalid. "Selected Member list is invalid ..... please check run time prompt limit setting."
Has any one successfully used web forms to run business rules in 11.1.2.2? Has anyone encountered these kind of whacky issues?
Thanks for any help!
Brenda

First of all, Thank you all for this post and replies and opening ticket with Oracle..
We are facing similar issue, and its very bizarre. Is there any fix or work-around available or, any patch-set released for these issues?
Please let everyone know. when a patch arrived for this (and other important fixes that I have not encountered as of now).
thanks in advance,

Similar Messages

Execution error while running rule in ERPI.

Hi,
I am facing error while, running the rule from the ERPI (workspace) , when i am checking the session in ODI, i am getting the error
where as in ODI there is no such logical schema HFM_TGT. i am doing the integration of EBS rel12 with Planning using the ERPI, ODI and FDQM.
I had created the Logical & physical schema for Planning, EBS and running through the context ERPI in ODI.
*"com.sunopsis.core.SnpsInexistantObjectException: There is no connection for this logical schema/context pair:HFM_TGT / ERPI*
at com.sunopsis.dwg.dbobj.SnpConnect.getSnpConnectByLSchemaNameAndContext(SnpConnect.java)
at com.sunopsis.dwg.dbobj.SnpConnect.getSnpConnect(SnpConnect.java)
at com.sunopsis.dwg.dbobj.SnpSession.getDwgConnectLst(SnpSession.java)
at com.sunopsis.dwg.dbobj.SnpSession.getConLst(SnpSession.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandScenario.treatCommand(DwgCommandScenario.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.i(e.java)
at com.sunopsis.dwg.cmd.h.y(h.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)".
help me out the above mention issue. .
mail id : [email protected]
Regards,
Sudhir sinha.
Edited by: user13032900 on Jun 15, 2010 10:06 PM

Hi,
I am using the classical metadata method. for creating the metadata rule file, i am adding the dimension using the FDM mapping.
As the mapping rule is running with extract id , but in ODI it is giving the error.
org.apache.bsf.BSFException: exception from Jython:
Traceback (innermost last):
File "<string>", line 38, in ?
com.hyperion.odi.common.ODIHAppException: Error occurred while loading driver.
Help me on the issue as, my objective is to extract the data from the ERP (EBS 12) through ERPI and load the data in the planning app through FDM.
Regards,

How to install and run Rules Manager in XE

I tried using Rules Manager in XE. Soon realized it is not installed. I ran the install scripts. Now it complains that java is not installed. Could not find initjvm scripts in XE. Has any one tried running Rules Manager on XE?

Hi
Notice that Java in the database is not available. See http://download-uk.oracle.com/docs/cd/B25329_01/doc/license.102/b25456/toc.htm#BABDDIAE...
HTH
Chris

Running Rules on "Locked"/Promoted Planning Units

Hi All,
I'm using Hyperion Planning and Smart View Version 11.1.2.2.
Does anyone know if it is possible to prevent users from being able to run rules on data that is supposedly "locked out" by virtue of a Planning Unit? I was under the impression that Planning Units were supposed to control who could change the data rather than simply who could type numbers into forms, maybe I had this wrong? It seems a bit of a transparent piece of functionality if users can still change numbers after they've passed ownership to someone else.
A working Example:
A user can promote their data, but is still able to go back to a form where that data sits and run Rules on-Save, through Right-click menus or through Smart View.
I'm worried about someone accidentally interfering with data whilst another user is analysing it etc.
Am I missing something here?
Regards
Ed

Hi, Ed.
You're right, Planning has so many parts to be developed. PU promotion doesn't prevent users from running BR's
If you're really worry about it you can think up a workaround.
You have to create a new form having design simular to a PU hierarchy. User have to enter data (suppose 1) in intersection of Scenario, Version, Entity and Account (if used in PUH) All others dims member should be Begbalance, Product n/a etc.
All BR's you need to prevent from executing while PU is approved, freezed or just owned by the reviewer or in other cases you think about should include extra code before original calculation takes place. You simply check the value of 1 in all calculated PUs in current BR and throw an error if meet it (@RETURN with some justified text message)
So when one user (lets say first owner) has finished entering data he goes to the form discussed above and enters 1 for related PU. You can build a task list having such steps After that no one can execute BR successfuly
Try this maybe it helps you
Vladimir

How to start/run Rule Author GUI?

hi,
how we can start / run Oracle Rule Author GUI (part of Oracle Business Rules of Oracle AS)?
as iv seen most of documentations n tutorials state only the 'usage' of it n none of those describe that how to start / run Rule author gui,,
Best Regards

hi ,
i did all the tasks specified in this guide,,,but it is not mentioned here that how to restart RULEAUTHOR? and when i tried to start it by :
http://machinename:7777/ruleauthor/
it gives me HTTP 404 Not Found.
plz tell me what to do ?
Best Regards

Is it possible to run Rules/Seq from SmartView while connected to Essbase?

Is it possible to run rules/sequences from SmartView while connected to Essbase URL in 9.3.1 version?
Current environment does not have planning and we have to run rules while connecting to Essbase.
Using http://<<ServerName>>:9080/aps/SmartView URL.
There seems to be no way we can do it. Referred to DBAG, Planning and SV document but not mentioned.
Thanks in advance!

Hi,
If you have attached you business rules to Essbase database connection in EAS, you should see them under Calculation Options. If you attached only Planning connection, you will have to connect to Planning in Smartview to execute business rules.
Else, you will see only calculation scripts attached to the Essbase application.
Let me know if it helps.
Cheers
RS

How do you run CalcMgrCmdLineLauncher.cmd for a ruleset that runs rules in multiple databases?

Hi all,
Just having recently upgraded to 11.1.2.2, I'm just trying to update our batch files to automate the running of some business rulesets using CalcMgrCmdLineLauncher.cmd. I can get business rules working ok, and rulesets that only run rules within the same database working, but I can't seem to get the rulesets running where the rules are running against multiple databases.
I know the syntax is CalcMgrCmdLineLauncher.cmd -f:%PWD% /A:%PlanAPP% /U:%RUNUSR% /D:%EssbCapexDB% /S:%BR%
but for the /D: argument, putting one of the databases in there doesnt work.
The batch runs, it even says its successful in the log but its too quick and looking at the job console it didnt run.
I can run the ruleset manually no problems.
Anyone know how to fix this?
Thanks

One stated to "search cmd, right click, and run as admininstrator" but where is this?
In the search field in your Vista start menu, type cmd
Next, right-click on the cmd that comes up and select "Run as administrator".

I would like my "ruler"/axis to show on my workspace however I cannot find show to make it visible.

I would like my "ruler"/axis to show on my workspace however I cannot find show to make it visible.

View > Rulers?
Could you please post a screenshot to illustrate the issue?

InDesign CS5 ME - Workspace/Toolbars issue

hi all
i bought new computer with win 7 ultimate 64 bit
and i try to install indesign cs5 middle east (ME) and after i finnish it i get : Window -> Workspace" dropdown there are no available Workspaces to choose from
The Workspace settings are set to "untitled" and, while you can manually set them back to normal, upon reloading InDesign 5, it has reset and you are back to no toolbars.
and i dont get :
For example, Re: InDesign CS5 - Workspace/Toolbars issue.. permissions? Re: InDesign CS5 - Workspace/Toolbars issue.. permissions? Re: InDesign CS5 - Workspace/Toolbars issue.. permissions? .... etc are not there, only the options to "Reset Untitled" and "New Workspace...".
in my old computer and in my leptop i dont have this problem
do you have any solution for me.
thanks
hanan

Ok sure,
When loading up InDesign CS5 (v7.0.2) on either a Dell XPS 720, or a Dell Precision T3400, the toolbars don't appear. The Workspace settings are set to "untitled" and, while you can manually set them back to normal, upon reloading InDesign 5, it has reset and you are back to no toolbars.
After some troubleshooting, under the "Window -> Workspace" dropdown there are no available Workspaces to choose from. For example, .... etc are not there, only the options to "Reset Untitled" and "New Workspace..."
It seems as though the program is having trouble loading the Workspace defaults into CS5 ID...
However, when you run the program as either a local admin or set the compatibility to Windows 2000, it loads up just fine, toolbars/workspaces and all.
Hope this clarifies the situation, again thanks for your help thus far.
Adam

After upgrading to mountain lion i keep getting an error message saying my startup disc is full. it shouldnt be full because there is barely anything on there and i was running windows with bootcamp prior to this with no issues

after upgrading to mountain lion i keep getting an error message saying my startup disc is full. it shouldnt be full because there is barely anything on there and i was running windows with bootcamp prior to this with no issues. my computer now freezes and programs close randomly. The usual command for opening windows with bootcamp doesnt work. once in restarted my computer after it froze and it rebooted in windows automatically. i really just want to know if there is a way to take the upgrade off my laptop because it is very annoying.

Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt

My MacBook Pro 13" (2012) is running Windows 7 on Bootcamp and there is an issue with the headset I'm using.

My MacBook Pro 13" (2012) is running Windows 7 on Bootcamp and there is an issue with the headset I'm using. I use a cheap Logitech Stereo Headset H130, but since there is only on audio plugin on the computer, I purchased a 3.5 mm 4-pin smartphone audio adapter thingy. That allowed me to put both my the sound coming to my headset & the microphone on my headset onto one wire. Everything worked wonderfully when running the Mac OS since they probably have support for that kind of stuff. The problem is though that once I try to use the same method in Windows 7, the OS doesn't recognize my headset microphone at all, but, instead when recording my voice decides to use the built-in mac microphone. Using this adapter still allows me to hear from my headset, but not use the microphone and that becomes a problem. It might be so that Windows 7 doesn't have support\drivers for that... How should I continue from here on out? Any advice?

From what I have read from others on here you may be out of luck. You would need the appropriate Windows drivers for the Cirrus chip in the Mac and no one has been able to successfully locate them. Apple wouldn't support this since Windows is an optional install.
Sorry to bring the bad news.

Is anybody else still not able to use the App Store? I can't download nor update any apps. I have an IPhone 5 device not currently updated to iOS 7 as my partner also has an iPhone 5 running iOS 7 and it seems to have some issues at the moment.

Is anybody else still not able to use the App Store? I can't download nor update any apps. I have an IPhone 5 device not currently updated to iOS 7 as my partner also has an iPhone 5 running iOS 7 and it seems to have some issues at the moment.

Hi Tech5Apple,
Thanks for visiting Apple Support Communities.
If you continue to see unexpected behavior when accessing the iTunes Store, the troubleshooting steps in this article can help:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
All the best,
Jeremy

I need to split up a folder of 80,000 emails in order to run rules

I just switched to SpamSieve, and now I want to re-examine all the spam that I have. (I know, it's insane. Don't ask.) But if I try to do anything to all the email at once, it just stalls or crashes outright.
So I found that the laborious process of grabbing a chunk of them, 1500 or fewer, and moving to a different folder allows me to process them. But of course, the process of grabbing and moving is ridiculously slow and obnoxious.
I started to try and come up with some kind of automator action, and quickly realized that that would require some major annoying time and hassle, assuming i could make anything work. (I'd like to be able to tell it to grab the first 500, make a new box, move to that box, grab first 500, etc. over and over until they were all done. Then write something that would run the rules on the boxes. It would be nice...)
I thought I had the perfect solution, the Big Mean Folder Machine. I used it to go through the mail folder in question and split them into folders of 1000 messages each. I hoped and prayed when I reopened Mail, they would be there. Well, they were, but they were there as the "white" folders that don't show anything inside them, and the top level folder still showed all the mail in the one mailbox.
HELP!
Any ideas?

Multiple pop accounts, all on my actual computer, the folder of mail is about 512MB. It's not the inbox, it's a box I made to move the junk to because SpamSieve needs junk filtering to be off, which makes the Mail junk folder disappear. So I moved all the messages at once to a new box I made.
Last night diddling around with it I managed to figure out that one key is making sure the new folders of mail are inside folders called "Messages" inside mailbox folder and the mailbox folder needs to have a plist file in it. I was messing with importing and I discovered that and actually managed to import one finder-created folder as a proper mailbox by doing that. Now ask me if I can remember everything I did that finally made that work? Because of course the key is the plist sitting in the mailbox fodler next to the folder called "messages" - some part of my messing around created that, not me. But I don't know what...
oy.

Build and run Rules with Jdev Integrated Web Determination Server

Hi
I created the rule using Oracle Policy Modeling (OPM). Then built and deployed with Embedded Tomcat web determination server. Successfully done it.
Now I have to run the same rule under Jdeveloper Integrated Server. As I know, current version of OPM doesn't support any external server other than Tomcat. In that case I have to copy the output from OPM to JDev Integrated server manually.
Let me know the server location where I have to copy the rule from OPM to Jdev Server.
Thanks
Dev

There are a couple of ways of deploying a new rulebase into OPA running on weblogic.
These can be found in the documentation in the Oracle Policy Automation Developer's Guide (http://docs.oracle.com/html/E38272_01/toc.htm)
1. The first way is to redploy the OPA runtime .war (web-determinations or determinations-server) when a new rulebase is built. These war files are created in the releases directory of the OPM project. When a new release is built the rulebase is embedded in the .war file
2. The second way is to re-deploy the rulebase only. The rulebase is called <project name>.zip and is found in the output directory of the OPM project.
To use the second approach in weblogic you must configure the OPA runtimes to use an external directory. See the Manage rulebases and application.properties sections of the Oracle Policy Automation Developer's Guide.
Then decide if you want to 'hot-swap' (deploy immediately after copying a new rulebase to this directory. If you do not use hot swapping, you will have to restart the web application when you deploy a new version.
Cheers
Frank
Edited by: frank.hampshire on Dec 13, 2012 11:35 AM

Running Rule in HFM

Hi,
Is there any way to run the rule in HFM,
I know that the rule will run at the time of consolidation,
if i want to run the rule only, is there any way.
Regards,
Kris

Hi,
The HFM rules don't work like Planning (where you can excecute a rule for a specifc form). HFM rules will always excecute the entire rules file for the entire sub-cube (so all the accounts and valid custom dimensions for the selected entity, scenario, period, year). The section in the file that will be run is determined by the type of action the user performs, i.e. calculate runs Sub Calculate, consolidate runs Sub Calculate; Sub Translate and Sub Consolidate to get to the parent.
Cheers

Running Rules in 11.1.2.2 workspace webforms - issues

Similar Messages

Maybe you are looking for