Running sanity checks in BIA produces erros
Hi,
I am running NameServerChecks.py and I see this error. What exactly does this mean?
=========================================================
Internal error while executing check cpu_usage: An internal error occured while executing
Traceback (most recent call last):
File "alertserver.py", line 1932, in run
result = self.nsc.alertCheck(self.check, cfg[T_NSCHKS_CHECKS][self.check][T_NSCHKS_PARAMS])
File "/usr/sap/BIA/TRX00/exe/python_support/NameServerChecks.py", line 4591, in alertCheck
result = eval(DEFAULTS[T_NSCHKS_CHECKS][check][T_CHECK_FUNCTION])
File "<string>", line 0, in ?
File "/usr/sap/BIA/TRX00/exe/python_support/NameServerChecks.py", line 3282, in check_getCpuUsage
statisticArray = self.getStatisticInfo(selectedServices, verbose)
File "/usr/sap/BIA/TRX00/exe/python_support/NameServerChecks.py", line 612, in getStatisticInfo
result = [host, port, service] + list(rs.simplestat())
Error: communication error: invalid port, 10.10.10.27:0
Internal error while executing check memory_usage: An internal error occured while exec
Traceback (most recent call last):
File "alertserver.py", line 1932, in run
result = self.nsc.alertCheck(self.check, cfg[T_NSCHKS_CHECKS][self.check][T_NSCHKS_PARAMS])
File "/usr/sap/BIA/TRX00/exe/python_support/NameServerChecks.py", line 4591, in alertCheck
result = eval(DEFAULTS[T_NSCHKS_CHECKS][check][T_CHECK_FUNCTION])
File "<string>", line 0, in ?
File "/usr/sap/BIA/TRX00/exe/python_support/NameServerChecks.py", line 3338, in check_getMemoryUsage
statisticArray = self.getStatisticInfo(selectedServices, verbose)
File "/usr/sap/BIA/TRX00/exe/python_support/NameServerChecks.py", line 612, in getStatisticInfo
result = [host, port, service] + list(rs.simplestat())
Error: communication error: invalid port, 10.10.10.27:0
==========================================================
Thanks
Frank
Frank,
did you run TREXSettings to set the environment variables correctly? If not, please execute
. ./TREXSettings.sh
in bash as user <sid>adm in directory
/usr/sap/<SID>/TRX<xx>/
After that, try executing the script again.
Sebastian
Similar Messages
-
How to check if BIA has effect on a BPS function
Dear Experts,
As I know BIA can also improve DB read time (data selection) when performing a BPS function. Currently we are using a BIA test installation to see if it will help us. We have some BPS function with long data selection times.
I know created BIA indexes on all involved real time cubes. By just executing the concerned BPS functions I can see no effect. I now want to check if the BPS functions do access the BIA at all. For queries this is quite easy to check with RSRT.
So my question is:
Is there any tool available to check wether BIA is used by a BPS function or not? Some kind of RSRT for BPS.
Thanks & Regards,
Ulrich MeierHi Jens,
Thanks. I tried this. Strange result is that I get no data in that trace when running a BPS function. I do get data when running that trace during execution of a query which runs on the same InfoCubes as the planning function.
In the meantime I found table RSDDSTATBIAUSE which gets updated each time a InfoProvider is accessed if it has a BIA Index. Here my InfoProviders get a +1 in field BIA_USED when accessing them with the BPS function.
Furthermore I came across OSS-Note 990000 and installed the latest version of report ZBPPOBPS70 (I already knew that from BW 3.5). Here I found that field 'BW:Used Aggregate' is not populated, although within the coding of ZBPPOBPS70 there is indication that it should either show the used aggregate or BIA Index. The data is read from table RSDDSTATDM field AGGREGATE. There I found entries in AGGREGATE for 'normal' query calls but none for BPS calls.
With alll that in mind I'm more and more confused...
Regards,
Ulrich -
Xnee-2.00 Installation - /lib/cpp fails sanity check
When I first tried running the configure file to start the installation process for this application, I ran into error after error and found solutions to them by installing packages off the SunOS cd's or from the sunfreeware site. But I cant find a solution to this problem.
the output when running the configure script is as follows for the problem:
checking how to run the C preprocessor... /lib/cpp
configure: error: C preprocessor "/lib/cpp" fails sanity check
the config.log file is very long and full of compile errors...many are repeats and around the part where its failing the only problem i can see is a "conftest.c" line 14: Cant find include file assert.h....
what are the packages i need for cpp to function, i have gcc-3.3.2 installed, are there others?? is there something else i'm going to run into later?? any help will be greatly appreciatedHave you try to use pkg-get
to get the binary from Sun?
If you really need to compile it by yourself, get studio first to make it easier. It will install developer package library in the box and help to resolve your dependence problem. -
Glibc 2.19 & find: sanity check of the fnmatch() library function fail
Since yesterdays update to glibc 2.19, find doesn't like searches by name. The update threw a hole lot of segmentations faults
[2014-02-12 15:06] [PACMAN] Running 'pacman --color auto -Sy'
[2014-02-12 15:06] [PACMAN] synchronizing package lists
[2014-02-12 15:07] [PACMAN] Running 'pacman --color auto -S -u'
[2014-02-12 15:07] [PACMAN] starting full system upgrade
[2014-02-12 15:08] [PACMAN] upgraded apr-util (1.5.3-1 -> 1.5.3-2)
[2014-02-12 15:08] [PACMAN] upgraded linux-api-headers (3.12.4-1 -> 3.13.2-1)
[2014-02-12 15:08] [ALPM] warning: /etc/locale.gen installed as /etc/locale.gen.pacnew
[2014-02-12 15:08] [ALPM-SCRIPTLET] Generating locales...
[2014-02-12 15:08] [ALPM-SCRIPTLET] de_DE.UTF-8
[2014-02-12 15:08] [ALPM-SCRIPTLET] en_US.UTF-8
[2014-02-12 15:08] [ALPM-SCRIPTLET] Generation complete.
[2014-02-12 15:08] [PACMAN] upgraded glibc (2.18-12 -> 2.19-1)
[2014-02-12 15:08] [PACMAN] upgraded binutils (2.24-1 -> 2.24-2)
[2014-02-12 15:08] [PACMAN] upgraded gcc-libs (4.8.2-7 -> 4.8.2-8)
[2014-02-12 15:08] [PACMAN] upgraded elfutils (0.157-1 -> 0.158-1)
[2014-02-12 15:08] [PACMAN] upgraded gcc (4.8.2-7 -> 4.8.2-8)
[2014-02-12 15:08] [PACMAN] upgraded shared-mime-info (1.2-1 -> 1.2-2)
[2014-02-12 15:08] [ALPM-SCRIPTLET] /tmp/alpm_Zt9oRn/.INSTALL: line 1: 10554 Segmentation fault (core dumped) xdg-icon-resource forceupdate --theme hicolor &>/dev/null
[2014-02-12 15:08] [PACMAN] upgraded kdelibs (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded kdegraphics-mobipocket (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded nepomuk-core (4.12.1-2 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded kactivities (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded kde-base-artwork (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded oxygen-icons (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [ALPM-SCRIPTLET] /tmp/alpm_lNExqJ/.INSTALL: line 1: 10562 Segmentation fault (core dumped) xdg-icon-resource forceupdate --theme hicolor &>/dev/null
[2014-02-12 15:08] [PACMAN] upgraded kdebase-runtime (4.12.1-3 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded kdebase-lib (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded nepomuk-widgets (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded kdebase-dolphin (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded kdebase-konsole (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded kdebase-plasma (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [ALPM-SCRIPTLET] /tmp/alpm_jc0NOD/.INSTALL: line 1: 10571 Segmentation fault (core dumped) xdg-icon-resource forceupdate --theme hicolor &>/dev/null
[2014-02-12 15:08] [PACMAN] upgraded kdepim-runtime (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [ALPM] warning: /usr/share/config/kdm/kdmrc installed as /usr/share/config/kdm/kdmrc.pacnew
[2014-02-12 15:08] [ALPM-SCRIPTLET] /tmp/alpm_9emqkf/.INSTALL: line 10: 10582 Segmentation fault (core dumped) xdg-icon-resource forceupdate --theme hicolor &>/dev/null
[2014-02-12 15:08] [PACMAN] upgraded kdebase-workspace (4.11.6-1 -> 4.11.6-2)
[2014-02-12 15:08] [ALPM-SCRIPTLET] /tmp/alpm_HVYliW/.INSTALL: line 1: 10587 Segmentation fault (core dumped) xdg-icon-resource forceupdate --theme hicolor &>/dev/null
[2014-02-12 15:08] [PACMAN] upgraded libkipi (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [ALPM-SCRIPTLET] /tmp/alpm_JMyH2D/.INSTALL: line 1: 10591 Segmentation fault (core dumped) xdg-icon-resource forceupdate --theme hicolor &>/dev/null
[2014-02-12 15:08] [PACMAN] upgraded kdegraphics-gwenview (4.12.1-2 -> 4.12.2-1)
[2014-02-12 15:08] [ALPM-SCRIPTLET] /tmp/alpm_BOmkIm/.INSTALL: line 1: 10595 Segmentation fault (core dumped) xdg-icon-resource forceupdate --theme hicolor &>/dev/null
[2014-02-12 15:08] [PACMAN] upgraded kdegraphics-kcolorchooser (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [ALPM-SCRIPTLET] /tmp/alpm_V9lYA5/.INSTALL: line 1: 10598 Segmentation fault (core dumped) xdg-icon-resource forceupdate --theme hicolor &>/dev/null
[2014-02-12 15:08] [PACMAN] upgraded kdegraphics-ksnapshot (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded libkexiv2 (4.12.1-2 -> 4.12.2-1)
[2014-02-12 15:08] [ALPM-SCRIPTLET] /tmp/alpm_NKbRqP/.INSTALL: line 1: 10602 Segmentation fault (core dumped) xdg-icon-resource forceupdate --theme hicolor &>/dev/null
[2014-02-12 15:08] [PACMAN] upgraded kdegraphics-okular (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [ALPM-SCRIPTLET] /tmp/alpm_1CccYz/.INSTALL: line 1: 10606 Segmentation fault (core dumped) xdg-icon-resource forceupdate --theme hicolor &>/dev/null
[2014-02-12 15:08] [PACMAN] upgraded libkdcraw (4.12.1-2 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded kdegraphics-thumbnailers (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded kdemultimedia-ffmpegthumbs (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [ALPM-SCRIPTLET] /tmp/alpm_PRYdSk/.INSTALL: line 1: 10609 Segmentation fault (core dumped) xdg-icon-resource forceupdate --theme hicolor &>/dev/null
[2014-02-12 15:08] [PACMAN] upgraded kdemultimedia-kmix (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded kdemultimedia-mplayerthumbs (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded kdepimlibs (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded kdeutils-ark (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded lib32-elfutils (0.157-1 -> 0.158-1)
[2014-02-12 15:08] [PACMAN] upgraded lib32-glibc (2.18-12 -> 2.19-1)
[2014-02-12 15:08] [PACMAN] upgraded lib32-gcc-libs (4.8.2-7 -> 4.8.2-8)
[2014-02-12 15:08] [PACMAN] upgraded libsasl (2.1.26-6 -> 2.1.26-7)
[2014-02-12 15:08] [PACMAN] upgraded mpd (0.18.7-1 -> 0.18.8-1)
[2014-02-12 15:08] [PACMAN] upgraded nginx (1.4.4-2 -> 1.4.5-1)
[2014-02-12 15:08] [PACMAN] upgraded openjpeg (1.5.1-1 -> 1.5.1-2)
[2014-02-12 15:08] [PACMAN] upgraded pam (1.1.8-2 -> 1.1.8-3)
[2014-02-12 15:08] [PACMAN] upgraded python2-numpy (1.8.0-1 -> 1.8.0-2)
[2014-02-12 15:08] [PACMAN] upgraded redland (1:1.0.17-1 -> 1:1.0.17-2)
[2014-02-12 15:08] [PACMAN] upgraded s-nail (14.5.2-3 -> 14.5.2-4)
[2014-02-12 15:08] [PACMAN] upgraded sudo (1.8.9.p4-1 -> 1.8.9.p5-1)
[2014-02-12 15:08] [PACMAN] upgraded systemd (208-10 -> 208-11)
[2014-02-12 15:08] [PACMAN] upgraded systemd-sysvcompat (208-10 -> 208-11)
[2014-02-12 15:08] [ALPM-SCRIPTLET] /tmp/alpm_7YRIvT/.INSTALL: line 10: 10659 Segmentation fault (core dumped) mkfontdir usr/share/fonts/local
[2014-02-12 15:08] [PACMAN] upgraded terminus-font (4.38-3 -> 4.38-4)
[2014-02-12 15:08] [PACMAN] upgraded vim-systemd (20130410-1 -> 20140209-1)
[2014-02-12 15:08] [PACMAN] upgraded whois (5.1.0-1 -> 5.1.1-1)
[2014-02-12 15:08] [PACMAN] upgraded xdg-utils (1.1.0.git20140109-1 -> 1.1.0.git20140207-1)
[2014-02-12 15:08] [PACMAN] upgraded xf86-video-intel (2.99.909-2 -> 2.99.910-1)
After that nearly all applications segfaulted but somehow it everything works again. Except for find (which I only recognized after mkinitcpio destroyed my initramfs......):
# find -name \*.pkg.tar.xz
find: sanity check of the fnmatch() library function failed.
Regex, type and all other operators work as expected:
# find -regex '.*\.pkg\.tar\.xz'
./gcc-4.8.2-7-x86_64.pkg.tar.xz
./binutils-2.24-1-x86_64.pkg.tar.xz
./glibc-2.18-12-x86_64.pkg.tar.xz
./gcc-libs-4.8.2-7-x86_64.pkg.tar.xz
# find -type d
# pacman -Q findutils glibc
findutils 4.4.2-5
glibc 2.19-1
First is suspected it to be a locale issue, but everything seems to be fine:
# diff -u0 {,/}etc/locale.gen
--- etc/locale.gen 2014-02-07 23:56:45.000000000 +0100
+++ /etc/locale.gen 2014-02-12 19:43:03.037279970 +0100
@@ -124 +124 @@
-#de_DE.UTF-8 UTF-8
+de_DE.UTF-8 UTF-8
@@ -161 +161 @@
-#en_US.UTF-8 UTF-8
+en_US.UTF-8 UTF-8
# locale-gen
Generating locales...
de_DE.UTF-8
en_US.UTF-8
Generation complete.
Downgrading to glibc 2.18-12 solved the problem for now...
# pacman -U --noprogressbar --noconfirm *
loading packages...
warning: downgrading package binutils (2.24-2 => 2.24-1)
warning: downgrading package gcc (4.8.2-8 => 4.8.2-7)
warning: downgrading package gcc-libs (4.8.2-8 => 4.8.2-7)
warning: downgrading package glibc (2.19-1 => 2.18-12)
resolving dependencies...
looking for inter-conflicts...
Packages (4): binutils-2.24-1 gcc-4.8.2-7 gcc-libs-4.8.2-7 glibc-2.18-12
Total Installed Size: 134.89 MiB
Net Upgrade Size: -0.42 MiB
:: Proceed with installation? [Y/n]
checking keyring...
checking package integrity...
loading package files...
checking for file conflicts...
checking available disk space...
downgrading glibc...
warning: /etc/locale.gen installed as /etc/locale.gen.pacnew
downgrading binutils...
downgrading gcc-libs...
downgrading gcc...
# find -name \*.pkg.tar.xz
./gcc-4.8.2-7-x86_64.pkg.tar.xz
./binutils-2.24-1-x86_64.pkg.tar.xz
./glibc-2.18-12-x86_64.pkg.tar.xz
./gcc-libs-4.8.2-7-x86_64.pkg.tar.xz
According to the findutils manual one should file a bug report for this message, but I don't think they expect glibc to be the buggy implementation of fnmatch that looks enough like the GNU version to fool configure, but which doesn't work properly.
Does anybody experience similar problems? Does anybody have suggestions how to solve this?
Last edited by auti (2014-02-13 22:14:12)I've regenerated the locales multiple times but only the upgrade to findutils 4.5.12 worked.
glibc 2.19-2 works with the current findutils.
But if a corrupt locale archive file caused this, why didn't findutils 4.5.12 complained about this?
Anyhow: It works, I'm happy; thanks for your effort, Allan! -
Hi,
I need someone to do a sanity check on a MPLS design.
I doing some consulting in a expanding metronet, in Sweden.
I've got the need to run ethernet over ATM, so I'm thinking EoMPLS. So my query, is it possible to run EoMPLS over the following
configuration. If so, can I also runs q-in-q (if I reconfigure the MTU size on both sides).
1Q-TRUNK - 7200VXR - ATM-SWITCH (NON-MPLS) - ATM-SWITCH (NON-MPLS) - 7200VXR - 1Q-TRUNK
Thanks
Best regards
DanielIt is certainly possible to run MPLS (frame mode) on the interface/subinterface between the two 7200s, which will allow you to run EoMPLS. You should also be able to configure q-in-q in this configuration.
Hope this helps, -
Rebuilding RAID set - need sanity check
I'm in the process of rebuilding a G5 used as a server that was built by a predecessor. It boots off two 250GB drives that are RAIDed. I don't have the password, so I attempted to change it using a Tiger install disk. Somehow booting off the DVD has destroyed the RAID set. I'm booting off a FW drive we use for diagnostics, and the drives show up in DiskUtility, but no RAID set up. if I do a 'sudo diskutil checkRAID' it says there's no RAID set to check.
If I list the drives they show up fine. Output (edited) is:
/dev/disk2
#: type name size identifier
0: Applepartitionscheme *233.8 GB disk2
1: Applepartitionmap 31.5 KB disk2s1
2: AppleDriverOpenFirmware 512.0 KB disk2s2
3: AppleBootRAID 233.8 GB disk2s3
/dev/disk4
#: type name size identifier
0: Applepartitionscheme *233.8 GB disk4
1: Applepartitionmap 31.5 KB disk4s1
2: AppleDriverOpenFirmware 512.0 KB disk4s2
3: AppleBootRAID 233.8 GB disk4s3
So the sanity check is this: If I run a repair mirror (sudo diskutil repairMirror disk2 disk4) will it wipe both drives or just rebuild the existing RAID setup?oh and that message keeps popping up, even when I log out of the website. If I choose "cancel" everything now continues as it should.
-
OES2SP3 to OES11SP1 Sanity Check
I have an OES2SP3 (SLES10SP4) server that I want to move to OES11SP1 (SLES11SP2). The tree is stable, but I am having some issues with the OES2SP3 server that I don't want to spend the time troubleshooting. My Master replica and all services is on a NW65 server and I have the luxury of being able to wipe the OES2 server. The OES2 server only does some file backups via scripts to an internal RAID and holds a RW replica. Looking for a sanity check on my process...
1. copy scripts from server to backup
2. remove eDir from server using nds-uninstall
(the OES doc says that ndsconfig rm is not supported in OES2SP3)
3. wait for replica ring to be stable - monitor via dsrepair on NW65 server
4. remove any references to the OES2 server via ConsoleOne
5. wait for replica ring to be stable - monitor via dsrepair on NW65 server
6. fresh install of SLES11SP2 and OES11SP1 (eDir only) onto server
7. add other OES11 services to server
TIA
-LOriginally Posted by LarryResch
I have an OES2SP3 (SLES10SP4) server that I want to move to OES11SP1 (SLES11SP2). The tree is stable, but I am having some issues with the OES2SP3 server that I don't want to spend the time troubleshooting. My Master replica and all services is on a NW65 server and I have the luxury of being able to wipe the OES2 server. The OES2 server only does some file backups via scripts to an internal RAID and holds a RW replica. Looking for a sanity check on my process...
1. copy scripts from server to backup
2. remove eDir from server using nds-uninstall
(the OES doc says that ndsconfig rm is not supported in OES2SP3)
3. wait for replica ring to be stable - monitor via dsrepair on NW65 server
4. remove any references to the OES2 server via ConsoleOne
5. wait for replica ring to be stable - monitor via dsrepair on NW65 server
6. fresh install of SLES11SP2 and OES11SP1 (eDir only) onto server
7. add other OES11 services to server
TIA
-L
Hi Larry,
If this is a regular fileserver (not housing iFolder and such special services)... your steps seem to cover the bases.
As an extra preparation step, if the OES server has it's own eDir replica, I'd remove it at least an hour or so before moving on to removing the OES server from the tree. Also running a quick eDir health check after having done so and before moving on to remove the server is a good routine.
Out of curiosity, do you have a link to the docs specifying 'ndsconfig rm' is unsupported? Have not run into issues with it but also had not seen that reference in the docs (not that I read them daily :P ).
If you have NSS volumes, you can relink them to the new server using the update NDS option within nssmu. Do note that you will also have to relink object properties to the volumes (like the user home directories).
Your tree CA configuration is also still valid (and not housed on the OES2 server)?
Cheers,
Willem -
Bridge CC on opening gives "Adobe Bridge CC has stopped working" Uninstalled, re-installed same error, will not run. "check online for a solution" does nothing.
Bridge worked great for a while then started to fail when starting. Old Bridge CS6 still works fine. HELP ... please.You problem is in the Fault Module MSVCR80.dll
Do a web search for this. Here is one LINK -
How to run virus check on macbook pro
I am having lots of ad pop-ups coming up when I am running Safari. How do I run virus check or get rid of these ads?
Remove unwanted adware that displays pop-up ads and graphics on your Mac - Apple Support
The Safe Mac » Adware Removal Guide -
How to Run F110 Check Payment with Sorting from Vendor Name?
Hi All,
We have a problem when I run F110 to create checks for many vendors. How can I run the check number sorted from vendor name alphabetically?
We can print it according to the vendor name alphabetically however the check running number is not sorted.
Point will be rewarded for solution.
Thanks,Brother!
Call transaction : O7s1 or see in configuration menu: paymentmedi-> define Sort Variant.
Create your Sort Variant accouding top your requirement, Input the same in Configuration of paymen.
call transaction FBZP, then press the button " Payment Method in company Code"
Hope this will be helful
Thanks -
Check Proposal is Run but Checks are not Printed-need to cancel the run
The Accounts Payable Check Proposal is Run but Checks are not Printed- I need to cancel the run. How do I do this ?
Points will be awarded.
Thanks.
KathyRestart
If the printer stops during printing, for example because of a power failure, you will need to restart
the print program.
1. To do this, choose System Services Reporting.
2. Enter the name of the print program (RFFOUS_C) and select Program Execute.
3. Enter the data identifying the print run and enter the check number from which the
program should be restarted in the Restart field.
4. Select Program Execute again.
If there is a system crash during the print run but before any checks have been printed, you
should proceed as follows:
1. Correct the error that caused the system to crash.
2. Delete the check information. To do this, choose Environment Check information
Delete For payment run.
3. Restart the print program but do not use the restart option described above.
If there is a system crash during the print run and some checks have already been printed, you
should proceed as follows:
1. Correct the error that caused the system to crash.
This error may occur, for example, when a check lot is used up and the next lot has not
been maintained. In this case, the first thing to do after the system crash is to enter a
new check lot. See: Maintaining Check Lots [Page 7]
2. Delete the check information. To do this, choose Environment Check information
Delete For payment run.
3. Restart the print program but do not use the restart option described above.
4. Delete the print output from the print management files.
5. Now restart the print program, this time using the restart option, (see above).
PAGE 25 IN CHECK MANAGEMENT PDF FILE FROM HELP.SAP. TO DOWNLOAD CLICK ON BELOW LINK
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/FIBP/FI-BL-BM-CM.pdf
ASSIGN POINTS IF HELPFUL. -
Bailout: failed spill-split-recycle sanity check
hi all
i hope someone can help me!
we have an enterprise portals productive installation on aix5.3
it is based on netweaver 7.0
i have just installed a java dialog instance on a windows 2003 server 64 bit which is happily talking to the central instance on aix BUT after changing the java parameters (sapnote 723909) for this new instance, the local windows dev_server0 file now complains with the following error:
JHVM_BuildArgumentList: main method arguments of node server0
210 com.sap.engine.core.configuration.impl.addons.PropertyName::init (154 bytes)
211 ! com.sap.engine.core.configuration.impl.cache.CachedConfiguration::prepareRead (167 bytes)
212 java.util.AbstractCollection::toArray (68 bytes)
213 com.sap.engine.lib.xml.dom.DOMDocHandler1::onCustomEvent (130 bytes)
214 com.sap.engine.lib.xml.dom.DOMDocHandler1::charData (73 bytes)
Bailout: failed spill-split-recycle sanity check
211 COMPILE FAILED
(there are many lines but i have just included one occurrence)
i just wondered if anyone could tell me which java parameter could have caused this?
i appreciate i could take out each parameter one by one and stop/start the instance to see when it stops complaining (and i will do this if no-one can help me)
many thanks
kirstyok,
i guess it was obvious really.....
the flag: -XX:+PrintCompilation (which excludes certain classes from compiling in order to prevent possible server VM crashes) is recommended in note 723909 to help avoid crashes caused by certain classes.
the thing is this flag seems to cause the class to fail a sanity check in order to stop it compiling which then writes out to the server log causing me unnecessary anguish.
if the flag is there to prevent classes compiling it should do it cleanly and quietly so im not sure now whether i want it or not!!!
anyway, apologies for anyone's time i wasted
kirsty -
Errors in Livecache when running a "check database structure"
Helleo, i have the following error messages when i do a check database structure of our QA Livecache environment :
DBA Action starts:
Timestamp: 20090406141745 Function: cdb Object: DATABASE
VERIFY command:
check data
VERIFY result:
ERR
-24988,ERR_SQL: SQL error
-9053,〰〰〰〰〰〰〰〰〰〳
17,Servertask Info: because b01pverify_participant() failed
10,Job 0 (Check Data) [executing] WaitingT147 Result=OK
6,b01pverify_participant() failed, Error code 9161 "data_page_corrupted"
17,Servertask Info: because b01pverify_participant() failed
10,Job 0 (Check Data) [executing] WaitingT147 Result=OK
6,b01pverify_participant() failed, Error code 9161 "data_page_corrupted"
17,Servertask Info: because b01pverify_participant() failed
10,Job 0 (Check Data) [executing] WaitingT147 Result=OK
6,b01pverify_participant() failed, Error code 9161 "data_page_corrupted"
DBA Action ends:
Timestamp: 20090406141753 State: Failure
ANd i have the same result whether i run it from DB13 or from the database managerIs there a way to run the check database with a repair option ? How can i fix this ?
Thanks for your help.
Y.
Edited by: Youssef ANEGAY on Apr 6, 2009 3:59 PM> I guess i'll have no choice but to restore the database ...
Yes - most like that will be the case
But before you do that, I'd check the hardware also (drivers, firmware, OS patches etc.). If the system is connected to a SAN I would also check the logs of that.
Markus -
Attempting to install Mountain Lion on iMac running OS 10.6.8 produces the message that ML cannot be installed on the int. HD because it is used by Time Machine. Time Machine is off and the only drive is the int. startup drive. What now?
You may have a folder named Backups.backupdb at the root level of your startup disk. You cannot find it with Spotlight. Just navigate to your startup disk (usually named "Macintosh HD") and drag Backups.backupdb to the Trash.
Is your startup disk partitioned? If so this may be applicable:
OS X Lion: Installer reports "This disk cannot be used to start up your computer" -
Need info on BW system sanity check
Hi ,
I am new to this Area,
can any one tell me what is the BMW system sanity check?
when we need to do this check?
on what BW system we need to do this?
Is there any pre defined steps we need to follow on sanity check?
Is there any check list available for sanity check?
Points will be assigned for your feed back.Hi Lakshmi,
Go to transaction code RSRV and see the test available there.
Also read documentation available for each test , it is self explainatory.
hope it helps
Regards
Vikash
Maybe you are looking for
-
I have an iPad 2 and have quite a lot of photos stored on the device. I would like to be able to download them onto an SD Card or a memory stick which would then allow me to go to a print shop and print out some hard copy prints of the photos I requi
-
Macbook no longer recognizes my midi keyboard
Hello folks. I'm having this problem where my macbook no longer recognizes my midi keyboard (M-Audio Radium 61.) I've had it working fine in the past through this midi to usb converter, and now the usb converter still lights up and shows data flowing
-
I can't add my songs to the new iTunes 11.0 I want the old iTunes back
I have been trying to add my MP3 music from my laptop to the iTunes library and it will not allow me to add the songs to the lists. I have tried all options given on the support page as well as any other guidance found on the internet and it will not
-
in oracle 9i some sys packages become invalid give solution
-
CIN-Pricing and Tax Procedure.
Hi CIN experts, How to add Packing and forwarding amount to the base amount of Tax. Scenario: 16% of Excise duty is inclusive of Packing and Forwarding amount. currently system calculating Excise from netvalue. Expecting Valuable reply. Cheers!!! Gop