Bailout: failed spill-split-recycle sanity check
hi all
i hope someone can help me!
we have an enterprise portals productive installation on aix5.3
it is based on netweaver 7.0
i have just installed a java dialog instance on a windows 2003 server 64 bit which is happily talking to the central instance on aix BUT after changing the java parameters (sapnote 723909) for this new instance, the local windows dev_server0 file now complains with the following error:
JHVM_BuildArgumentList: main method arguments of node server0
210 com.sap.engine.core.configuration.impl.addons.PropertyName::init (154 bytes)
211 ! com.sap.engine.core.configuration.impl.cache.CachedConfiguration::prepareRead (167 bytes)
212 java.util.AbstractCollection::toArray (68 bytes)
213 com.sap.engine.lib.xml.dom.DOMDocHandler1::onCustomEvent (130 bytes)
214 com.sap.engine.lib.xml.dom.DOMDocHandler1::charData (73 bytes)
Bailout: failed spill-split-recycle sanity check
211 COMPILE FAILED
(there are many lines but i have just included one occurrence)
i just wondered if anyone could tell me which java parameter could have caused this?
i appreciate i could take out each parameter one by one and stop/start the instance to see when it stops complaining (and i will do this if no-one can help me)
many thanks
kirsty
ok,
i guess it was obvious really.....
the flag: -XX:+PrintCompilation (which excludes certain classes from compiling in order to prevent possible server VM crashes) is recommended in note 723909 to help avoid crashes caused by certain classes.
the thing is this flag seems to cause the class to fail a sanity check in order to stop it compiling which then writes out to the server log causing me unnecessary anguish.
if the flag is there to prevent classes compiling it should do it cleanly and quietly so im not sure now whether i want it or not!!!
anyway, apologies for anyone's time i wasted
kirsty
Similar Messages
-
Xnee-2.00 Installation - /lib/cpp fails sanity check
When I first tried running the configure file to start the installation process for this application, I ran into error after error and found solutions to them by installing packages off the SunOS cd's or from the sunfreeware site. But I cant find a solution to this problem.
the output when running the configure script is as follows for the problem:
checking how to run the C preprocessor... /lib/cpp
configure: error: C preprocessor "/lib/cpp" fails sanity check
the config.log file is very long and full of compile errors...many are repeats and around the part where its failing the only problem i can see is a "conftest.c" line 14: Cant find include file assert.h....
what are the packages i need for cpp to function, i have gcc-3.3.2 installed, are there others?? is there something else i'm going to run into later?? any help will be greatly appreciatedHave you try to use pkg-get
to get the binary from Sun?
If you really need to compile it by yourself, get studio first to make it easier. It will install developer package library in the box and help to resolve your dependence problem. -
Glibc 2.19 & find: sanity check of the fnmatch() library function fail
Since yesterdays update to glibc 2.19, find doesn't like searches by name. The update threw a hole lot of segmentations faults
[2014-02-12 15:06] [PACMAN] Running 'pacman --color auto -Sy'
[2014-02-12 15:06] [PACMAN] synchronizing package lists
[2014-02-12 15:07] [PACMAN] Running 'pacman --color auto -S -u'
[2014-02-12 15:07] [PACMAN] starting full system upgrade
[2014-02-12 15:08] [PACMAN] upgraded apr-util (1.5.3-1 -> 1.5.3-2)
[2014-02-12 15:08] [PACMAN] upgraded linux-api-headers (3.12.4-1 -> 3.13.2-1)
[2014-02-12 15:08] [ALPM] warning: /etc/locale.gen installed as /etc/locale.gen.pacnew
[2014-02-12 15:08] [ALPM-SCRIPTLET] Generating locales...
[2014-02-12 15:08] [ALPM-SCRIPTLET] de_DE.UTF-8
[2014-02-12 15:08] [ALPM-SCRIPTLET] en_US.UTF-8
[2014-02-12 15:08] [ALPM-SCRIPTLET] Generation complete.
[2014-02-12 15:08] [PACMAN] upgraded glibc (2.18-12 -> 2.19-1)
[2014-02-12 15:08] [PACMAN] upgraded binutils (2.24-1 -> 2.24-2)
[2014-02-12 15:08] [PACMAN] upgraded gcc-libs (4.8.2-7 -> 4.8.2-8)
[2014-02-12 15:08] [PACMAN] upgraded elfutils (0.157-1 -> 0.158-1)
[2014-02-12 15:08] [PACMAN] upgraded gcc (4.8.2-7 -> 4.8.2-8)
[2014-02-12 15:08] [PACMAN] upgraded shared-mime-info (1.2-1 -> 1.2-2)
[2014-02-12 15:08] [ALPM-SCRIPTLET] /tmp/alpm_Zt9oRn/.INSTALL: line 1: 10554 Segmentation fault (core dumped) xdg-icon-resource forceupdate --theme hicolor &>/dev/null
[2014-02-12 15:08] [PACMAN] upgraded kdelibs (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded kdegraphics-mobipocket (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded nepomuk-core (4.12.1-2 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded kactivities (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded kde-base-artwork (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded oxygen-icons (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [ALPM-SCRIPTLET] /tmp/alpm_lNExqJ/.INSTALL: line 1: 10562 Segmentation fault (core dumped) xdg-icon-resource forceupdate --theme hicolor &>/dev/null
[2014-02-12 15:08] [PACMAN] upgraded kdebase-runtime (4.12.1-3 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded kdebase-lib (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded nepomuk-widgets (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded kdebase-dolphin (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded kdebase-konsole (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded kdebase-plasma (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [ALPM-SCRIPTLET] /tmp/alpm_jc0NOD/.INSTALL: line 1: 10571 Segmentation fault (core dumped) xdg-icon-resource forceupdate --theme hicolor &>/dev/null
[2014-02-12 15:08] [PACMAN] upgraded kdepim-runtime (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [ALPM] warning: /usr/share/config/kdm/kdmrc installed as /usr/share/config/kdm/kdmrc.pacnew
[2014-02-12 15:08] [ALPM-SCRIPTLET] /tmp/alpm_9emqkf/.INSTALL: line 10: 10582 Segmentation fault (core dumped) xdg-icon-resource forceupdate --theme hicolor &>/dev/null
[2014-02-12 15:08] [PACMAN] upgraded kdebase-workspace (4.11.6-1 -> 4.11.6-2)
[2014-02-12 15:08] [ALPM-SCRIPTLET] /tmp/alpm_HVYliW/.INSTALL: line 1: 10587 Segmentation fault (core dumped) xdg-icon-resource forceupdate --theme hicolor &>/dev/null
[2014-02-12 15:08] [PACMAN] upgraded libkipi (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [ALPM-SCRIPTLET] /tmp/alpm_JMyH2D/.INSTALL: line 1: 10591 Segmentation fault (core dumped) xdg-icon-resource forceupdate --theme hicolor &>/dev/null
[2014-02-12 15:08] [PACMAN] upgraded kdegraphics-gwenview (4.12.1-2 -> 4.12.2-1)
[2014-02-12 15:08] [ALPM-SCRIPTLET] /tmp/alpm_BOmkIm/.INSTALL: line 1: 10595 Segmentation fault (core dumped) xdg-icon-resource forceupdate --theme hicolor &>/dev/null
[2014-02-12 15:08] [PACMAN] upgraded kdegraphics-kcolorchooser (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [ALPM-SCRIPTLET] /tmp/alpm_V9lYA5/.INSTALL: line 1: 10598 Segmentation fault (core dumped) xdg-icon-resource forceupdate --theme hicolor &>/dev/null
[2014-02-12 15:08] [PACMAN] upgraded kdegraphics-ksnapshot (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded libkexiv2 (4.12.1-2 -> 4.12.2-1)
[2014-02-12 15:08] [ALPM-SCRIPTLET] /tmp/alpm_NKbRqP/.INSTALL: line 1: 10602 Segmentation fault (core dumped) xdg-icon-resource forceupdate --theme hicolor &>/dev/null
[2014-02-12 15:08] [PACMAN] upgraded kdegraphics-okular (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [ALPM-SCRIPTLET] /tmp/alpm_1CccYz/.INSTALL: line 1: 10606 Segmentation fault (core dumped) xdg-icon-resource forceupdate --theme hicolor &>/dev/null
[2014-02-12 15:08] [PACMAN] upgraded libkdcraw (4.12.1-2 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded kdegraphics-thumbnailers (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded kdemultimedia-ffmpegthumbs (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [ALPM-SCRIPTLET] /tmp/alpm_PRYdSk/.INSTALL: line 1: 10609 Segmentation fault (core dumped) xdg-icon-resource forceupdate --theme hicolor &>/dev/null
[2014-02-12 15:08] [PACMAN] upgraded kdemultimedia-kmix (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded kdemultimedia-mplayerthumbs (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded kdepimlibs (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded kdeutils-ark (4.12.1-1 -> 4.12.2-1)
[2014-02-12 15:08] [PACMAN] upgraded lib32-elfutils (0.157-1 -> 0.158-1)
[2014-02-12 15:08] [PACMAN] upgraded lib32-glibc (2.18-12 -> 2.19-1)
[2014-02-12 15:08] [PACMAN] upgraded lib32-gcc-libs (4.8.2-7 -> 4.8.2-8)
[2014-02-12 15:08] [PACMAN] upgraded libsasl (2.1.26-6 -> 2.1.26-7)
[2014-02-12 15:08] [PACMAN] upgraded mpd (0.18.7-1 -> 0.18.8-1)
[2014-02-12 15:08] [PACMAN] upgraded nginx (1.4.4-2 -> 1.4.5-1)
[2014-02-12 15:08] [PACMAN] upgraded openjpeg (1.5.1-1 -> 1.5.1-2)
[2014-02-12 15:08] [PACMAN] upgraded pam (1.1.8-2 -> 1.1.8-3)
[2014-02-12 15:08] [PACMAN] upgraded python2-numpy (1.8.0-1 -> 1.8.0-2)
[2014-02-12 15:08] [PACMAN] upgraded redland (1:1.0.17-1 -> 1:1.0.17-2)
[2014-02-12 15:08] [PACMAN] upgraded s-nail (14.5.2-3 -> 14.5.2-4)
[2014-02-12 15:08] [PACMAN] upgraded sudo (1.8.9.p4-1 -> 1.8.9.p5-1)
[2014-02-12 15:08] [PACMAN] upgraded systemd (208-10 -> 208-11)
[2014-02-12 15:08] [PACMAN] upgraded systemd-sysvcompat (208-10 -> 208-11)
[2014-02-12 15:08] [ALPM-SCRIPTLET] /tmp/alpm_7YRIvT/.INSTALL: line 10: 10659 Segmentation fault (core dumped) mkfontdir usr/share/fonts/local
[2014-02-12 15:08] [PACMAN] upgraded terminus-font (4.38-3 -> 4.38-4)
[2014-02-12 15:08] [PACMAN] upgraded vim-systemd (20130410-1 -> 20140209-1)
[2014-02-12 15:08] [PACMAN] upgraded whois (5.1.0-1 -> 5.1.1-1)
[2014-02-12 15:08] [PACMAN] upgraded xdg-utils (1.1.0.git20140109-1 -> 1.1.0.git20140207-1)
[2014-02-12 15:08] [PACMAN] upgraded xf86-video-intel (2.99.909-2 -> 2.99.910-1)
After that nearly all applications segfaulted but somehow it everything works again. Except for find (which I only recognized after mkinitcpio destroyed my initramfs......):
# find -name \*.pkg.tar.xz
find: sanity check of the fnmatch() library function failed.
Regex, type and all other operators work as expected:
# find -regex '.*\.pkg\.tar\.xz'
./gcc-4.8.2-7-x86_64.pkg.tar.xz
./binutils-2.24-1-x86_64.pkg.tar.xz
./glibc-2.18-12-x86_64.pkg.tar.xz
./gcc-libs-4.8.2-7-x86_64.pkg.tar.xz
# find -type d
# pacman -Q findutils glibc
findutils 4.4.2-5
glibc 2.19-1
First is suspected it to be a locale issue, but everything seems to be fine:
# diff -u0 {,/}etc/locale.gen
--- etc/locale.gen 2014-02-07 23:56:45.000000000 +0100
+++ /etc/locale.gen 2014-02-12 19:43:03.037279970 +0100
@@ -124 +124 @@
-#de_DE.UTF-8 UTF-8
+de_DE.UTF-8 UTF-8
@@ -161 +161 @@
-#en_US.UTF-8 UTF-8
+en_US.UTF-8 UTF-8
# locale-gen
Generating locales...
de_DE.UTF-8
en_US.UTF-8
Generation complete.
Downgrading to glibc 2.18-12 solved the problem for now...
# pacman -U --noprogressbar --noconfirm *
loading packages...
warning: downgrading package binutils (2.24-2 => 2.24-1)
warning: downgrading package gcc (4.8.2-8 => 4.8.2-7)
warning: downgrading package gcc-libs (4.8.2-8 => 4.8.2-7)
warning: downgrading package glibc (2.19-1 => 2.18-12)
resolving dependencies...
looking for inter-conflicts...
Packages (4): binutils-2.24-1 gcc-4.8.2-7 gcc-libs-4.8.2-7 glibc-2.18-12
Total Installed Size: 134.89 MiB
Net Upgrade Size: -0.42 MiB
:: Proceed with installation? [Y/n]
checking keyring...
checking package integrity...
loading package files...
checking for file conflicts...
checking available disk space...
downgrading glibc...
warning: /etc/locale.gen installed as /etc/locale.gen.pacnew
downgrading binutils...
downgrading gcc-libs...
downgrading gcc...
# find -name \*.pkg.tar.xz
./gcc-4.8.2-7-x86_64.pkg.tar.xz
./binutils-2.24-1-x86_64.pkg.tar.xz
./glibc-2.18-12-x86_64.pkg.tar.xz
./gcc-libs-4.8.2-7-x86_64.pkg.tar.xz
According to the findutils manual one should file a bug report for this message, but I don't think they expect glibc to be the buggy implementation of fnmatch that looks enough like the GNU version to fool configure, but which doesn't work properly.
Does anybody experience similar problems? Does anybody have suggestions how to solve this?
Last edited by auti (2014-02-13 22:14:12)I've regenerated the locales multiple times but only the upgrade to findutils 4.5.12 worked.
glibc 2.19-2 works with the current findutils.
But if a corrupt locale archive file caused this, why didn't findutils 4.5.12 complained about this?
Anyhow: It works, I'm happy; thanks for your effort, Allan! -
P6N Diamond & SLI controller sanity check
what i would like is a sanity check please from community before RMA is done, i've already contacted both MSI and supplier and have RMA status enabled but before shipping would like to do an opinion from more professional/ experienced people here please
MSI reports that SLI controller is bad and to RMA... so ya i probably will but just want doctor 2nd opinions
thanks in advance!
testing past few days and having major problems with SLI.
mainboard: P6N Diamond MS-7320 v1.0 BIOS 1.2
processor: Intel Core2 Duo E6850
graphics cards: SLI NX8500GT TD256EH (x2) PCIx16 (both in white slots )
memory: Corsair CM2x 1024-66400C4 (800mhz, dual channel) (total 2GB)
drives: WD1600AA (?) SATAII 3.0GB (raid 0, hardware dipswitched)
power: rosewill RX750-S-B Xtreme 750W ATX12V v2.2 EPS12V v2.91 (voltages per bios in spec)
I have performed several tests including:
memtest86+ : 25 iterations on memory over 8 hour period = PASS
ntune stability test : nx8500GT (card #1) in pcix16slot#1 = PASS
ntune stability test : nx8500GT (card #1) in pcix16slot#2 = PASS
ntune stability test : nx8500GT (card #2) in pcix16slot#1 = PASS
ntune stability test : nx8500GT (card #2) in pcix16slot#2 = PASS
ntune stability test : card#1 in slot#1 & card#2 in slot#2 = FAIL (sli mode on)
ntune stability test : card#1 in slot#1 & card#2 in slot#2 = FAIL (sli mode off)
ntune stability test : card#1 in slot#2 & card#2 in slot#1 = FAIL (sli mode on)
ntune stability test : card#1 in slot#2 & card#2 in slot#1 = FAIL (sli mode off)
no overclocking
CPU temperatures ~22 celcius
SYSTEM temperatures ~38 celcius
GPU1&2 temp idle ~63 to 66 celcius
GPU1&2 temp stress ~72 celcius
all hardware tests ok, no power surges, power supply is adequate and in specs.
only problems occuring when both cards are in system and operate in either SLI or non-SLI mode.
all microsoft latest security updates applied
following hotfixes applied:
KB940105
KB936710
KB930833
KB932471
KB945149 (latest per request)Quote from: BOSSKILLER on 07-December-07, 04:33:29
What kind of problems you have?
Have you tested in XP?
PSU details.
Latest drivers from Nvidia installed?
Power cables to both VGA's connected?
SLI Bridge connected?
Hi,
Answers best I can below:
Q: Have you tested in XP?
No, sorry.. I only have Vista x64 platform to use and test (license only )
Q: PSU details.
posted above, but here you go...
Rosewill RX750-S-B Xtreme 750W ATX12V v2.2 EPS12V v2.91 (voltages per bios in spec)
Q: Latest drivers from Nvidia installed?
Yes (data from dxdiag for you)
Driver Version: 7.15.0011.6375 (English)
DDI Version: 9Ex
Driver Attributes: Final Retail
Driver Date/Size: 10/4/2007 17:14:00, 4993024 bytes
WHQL Logo'd: Yes
Q: Power cables to both VGA's connected? & SLI Bridge connected?
Interesting point With this particular setup, these MSI NX8500GT TD256EH cards do not have SLI bridge and do not require power plugged into video card. SLI option has onboard bridge controller and is recognized by nvidia drivers and nTune control panel (i am actually able to enable SLI this way w/o a bridge) yes, I had to rub my eyes too a few time while researching this configuration.
Mainboard supports ATX 24pin powerconnector (ATX1) and a ATX 12V (JPW1) 8 pin connector. The power supply supports these types of connections to mainboard. I will need to reboot after this post and do a visual inspection of reported BIOS voltages for you though and will do so. -
Please help. My ipod classic could not be recognised by itunes when I connect my ipod to PC. Previously it has been recognised before I updated. This was a while ago now and so I removed all apple files and re installed the latest itunes but am having the same problem.
When I download itunes, it says that Ipod Service failed to start. I checked the services under task manager and when I try to start it, it says access denied. How to I get access and for the ipod service to start and run?Some anti-virus programs (e.g., McAfee) have this rule that can be invoked under the "maximum protection" settings: PREVENT PROGRAMS REGISTERING AS A SERVICE. If that rule is set to BLOCK, then any attempt to install or upgrade iTunes will fail with an "iPod service failed to start" message.
If you are getting this problem with iTunes, check to see if your anti-virus has this setting and unset it, at least for as long as the iTunes install requires. Exactly how to find the rule and turn it on and off will vary, depending upon your anti-malware software. However, if your anti-virus or anti-malware software produces a log of its activities, examining the log may help you find the problem.
For example, here's the log entry for McAfee:
9/23/2009 3:18:45 PM Blocked by Access Protection rule NT AUTHORITY\SYSTEM C:\WINDOWS\system32\services.exe \REGISTRY\MACHINE\SYSTEM\ControlSet001\Services\iPod Service Common Maximum Protection:Prevent programs registering as a service Action blocked : Create
Note that the log says "Common Maximum Protection: Prevent programs registering as a service". The "Common Maximum Protection" is the location of the rule, "Prevent programs registering as a service" is the rule. I used that information to track down the location in the McAfee VirusScan Console where I could turn the rule off.
After I made the change, iTunes installed without complaint. -
Hi,
I have the subreport calling from the main report. The subreport is based on MDX query agianst the SSAS cube. some dimensions in cube has values 0 and 1.
when I try to pass '0' to the sub report as the parameter value, it gives an error "Data Retrieval failed for the report, please check the log for more details".
Actually I am using table for storing these parameter values. In the main report I am calling this table (dataset) and passing these values to subreport.
so I have given like [0],[1] and this works fine. when I give only either [0] or [1] then it is throwing an error.
Could you please advise on this.
Appreciate all and any help.
Thanks,
DivyaHi Divya,
Based on the current description, I understand that there is no issue if you pass two values from main report to subreport, while the issue occurs when passing one value to subreport.
To narrow down the issue, I want to confirm whether the subreport can run if there is only [0] or [1] in the subreport. If so, it indicates the query statements exist error in the subreport. If it’s not the case, this shows the issue occurs during passing
values from main report to subreport. To make further analysis, please post the details of query statements of the subreport to the forum.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support -
Dear Experts,
We are getting below error on portal while using the BEX query in BI system.
Error:
BEx Web Application
Error: First RFC call failed, config not loaded. Check the System landscape configuration.
Exception occurred while processing the current request; this exception cannot be handled by the application or framework
Failed to process request; contact your system administrator
To facilitate analysis of the problem, keep a copy of this error page
We are sorry for the inconvenience.
As the ITS & WEB AS connection tests go successful on object created for BI system in portal.
Kindly suggest me on this issue..
Thanks,
Bharath.Hi Bharath,
Please go through the below SAP Note and let me know if this helps.
1903392 - Error: First RFC call failed, config not loaded
BR,
Anurag -
Good morning, I have the following problem. I can not start Adobe Muse on my computer because I get a box Assertion Failed in file "... \ src \ ape \ DOMFontProvider.cpp" at line 482: numFontadded = = 1
Doregisterfont fail to add font. Check museapp \ hello \ resources for missing filesAre you still facing the same issue ? if yes then please post the screenshot of exact error and few details such as if you are getting this error while opening a specific file or on double click on Muse itself ?
Thanks,
Sanjit -
Need info on BW system sanity check
Hi ,
I am new to this Area,
can any one tell me what is the BMW system sanity check?
when we need to do this check?
on what BW system we need to do this?
Is there any pre defined steps we need to follow on sanity check?
Is there any check list available for sanity check?
Points will be assigned for your feed back.Hi Lakshmi,
Go to transaction code RSRV and see the test available there.
Also read documentation available for each test , it is self explainatory.
hope it helps
Regards
Vikash -
Hi All,
I would like to develop sanity check script for our product Oracle Db.
It should be put on crontab, worked periodically.
How can I retrieve simple pl/sql query(for example how many connections and user..) elapsed time?. Is it possible to achieve this goal by using UNIX scripts(perl, bash etc..) and specific pl/sql statement or have I write to application with java or C?Bash and Sql can be used for that, but you should clarify a bit more what you want to do. Here a small example :
$ cat users.sql
col username for a20
select sid, serial#, username, to_char(logon_time,'dd/mm/yyyy hh24:mi:ss') logon_time,
to_number(sysdate - logon_time)*1440 elapsed_minutes
from v$session
where username is not null
order by username, logon_time
exit
$ sqlplus -s / as sysdba @users
SID SERIAL# USERNAME LOGON_TIME ELAPSED_MINUTES
144 38 SCOTT 02/04/2006 15:18:10 21.6666667
142 14 SCOTT 02/04/2006 15:28:41 11.15
143 105 SYS 02/04/2006 15:39:50 0
159 113 TEST 02/04/2006 15:18:43 21.1166667
$ -
Potal Authorisation Error:"Failed to connect backend system.Check your syst
Hi Experts,
Please advise me on how to proceed....
I created a dashboard reports (5) based on 5 different reports in BI Queries using Visual Composer...I deployed them to portal and in portal i assigned those iviews to a role and assigned that role to a end user.
In BW end user is autorized to execute those 5 queries and in portal user is able to access those queries as well
But when he tried to execute Dashboard reports..it is displaying error
"Failed to connect backend system.Check your system definition and user priviliges"
Then i modified his authorisations in BW assigned SAP_J2EE_ADMIN role in BW and then in portal he is able to execute the Dashboard reports...by assigning the SAP_J2EE_ADMIN role he is able to execute dashboards in portal and he got more authorisation in portal than he required like 'Content Admin','User Admin' and 'System Admin'
I tried by using SAP_J2EE_GUEST role but he is getting error
"Failed to connect backend system.Check your system definition and user priviliges"
Please advise on how to proceed
ThanksHi,
Refer,
Visual composer
Failed to connect to backend system. Check your system definition and user
Regards,
P.Manivannan. -
"Failed to connect backend system.Check your system definition and user pri
Hi Experts,
I am a BW Consultant working on Portal & Visual Composer (7.0)
As a Developer i got SAP_ALL & SAP_J2EE_ADMIN roles in BW and System Admin and VC role in Portal.
In Portal Created/Published iviews for BW Queries (Transaction) and Published them to a role (role1) in portal.
In Visual Composer i developed Dashboard reports on BW Queries ,made them public and deployed them to a portal role(role 1) in portal.
I assigned portal role to my self and tested the queries and dashboards in portal everything is working perfectly.
In VC i can see 3 different systems defined in Portal
I created a Test user (with profile of end user) in BW,Testuser is authorised to view all the reports in BW and All data in all data targets and in portal testuser is assigned with Role1 and VC Role.
(Note: In BW Testuser doesn't had J2EE_ADMIN role).
Portal:
When i login to portal as testuser and tries to execute the BW Queries (Transaction) and it working perfectly.
When i tried to execute Dashboard reports developed in Visual Composer it gives me an error
"Failed to connect backend system.Check your system definition and user priviliges"
In Visual Composer i logged in as testuser (as test user got VC role assigned) i can't see any list of avaliable systems under "Find Data"
When i modified testuser profile in BW and updated with SAP_J2EE_ADMIN then i can execute the dashboard report but at the same time testuser got more than what he should have like user admin,system admin...etc
I searched the sdn and find some similar threads ...but nothing was useful
Please update me what went wrong and how to fix this...
Thanks in advanceHi,
Refer,
Visual composer
Failed to connect to backend system. Check your system definition and user
Regards,
P.Manivannan. -
Displaying split menu containing check boxes in struts
How to display a split menu containing check boxes ,in the first a list of all families should be displayed and when we click on a family ,then in the second menu it should display list of check boxes of all the members . If the check box of a family is checked then all members of that family have to be in checked state .
* Menu_Demo.java
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class Menu_Demo extends JFrame {
public Menu_Demo() {
initComponents();
private void initComponents() {
setTitle("Menu Demo");
setDefaultCloseOperation(WindowConstants.EXIT_ON_CLOSE);
setSize(400,300);
setLocationRelativeTo(null);
//create menu components
menubar = new JMenuBar();
families = new JMenu();
family1Select = new JCheckBoxMenuItem();
family2Select = new JCheckBoxMenuItem();
members = new JMenu();
family1 = new JMenu();
member11 = new JCheckBoxMenuItem();
member12 = new JCheckBoxMenuItem();
family2 = new JMenu();
member21 = new JCheckBoxMenuItem();
member22 = new JCheckBoxMenuItem();
//init families menu
ItemListener listener = new ItemListener() {
public void itemStateChanged(ItemEvent evt) {
familyStateChanged(evt);
families.setText("Families");
family1Select.setText("Family 1");
family1Select.addItemListener(listener);
families.add(family1Select);
family2Select.setText("Family 2");
family2Select.addItemListener(listener);
families.add(family2Select);
menubar.add(families);
//init family members menu
members.setText("Members");
family1.setText("Family 1");
family1.setVisible(false);
member11.setText("Member 11");
family1.add(member11);
member12.setText("Member 12");
family1.add(member12);
members.add(family1);
family2.setText("Family 2");
family2.setVisible(false);
member21.setText("Member 21");
family2.add(member21);
member22.setText("Member 22");
family2.add(member22);
members.add(family2);
members.setEnabled(false);
menubar.add(members);
setJMenuBar(menubar);
private void familyStateChanged(ItemEvent evt) {
JCheckBoxMenuItem family = (JCheckBoxMenuItem)evt.getSource();
//find corresponding family members menu
JMenu familyMembers = null;
if( family.getText().equalsIgnoreCase("Family 1") ){
familyMembers = family1;
}else{
familyMembers = family2;
//set visiblility and selection
boolean selection = family.isSelected();
familyMembers.setVisible( selection );
Component[] membersArray = familyMembers.getMenuComponents();
for( int i=0; i<membersArray.length; i++ ){
((JCheckBoxMenuItem)membersArray).setSelected(selection);
//enable family members menu only if there is at least one family selected
members.setEnabled(false);
Component[] familiesArray = families.getMenuComponents();
for( int i=0; i<familiesArray.length; i++ ){
if( ((JCheckBoxMenuItem)familiesArray[i]).isSelected() ){
members.setEnabled(true);
break;
public static void main(String args[]) {
new Menu_Demo().setVisible(true);
private JMenuBar menubar;
private JMenu families, members, family1, family2;
private JCheckBoxMenuItem family1Select, family2Select, member11, member12, member21, member22; -
Sanity check - migrating library to new mac
I'm migrating to a new machine and will use the opportunity to do a fresh install of Aperture. I'd be grateful for a reminder / sanity check on how to migrate my data / settings after the install:
All I need to do (after Aperture is installed, updated and checked) is replace the default library file with my Aperture library from my previous machine and start Aperture ?
My library includes both local and referenced (to a network drive) masters. Am I likely to need to re-establish connection with all of the referenced masters ?
What about keywords and other preferences ? Can someone remind me where these live and what needs to be moved ?
Many thanks.
Paulmacpaul11 wrote:
I'm migrating to a new machine and will use the opportunity to do a fresh install of Aperture.
Yes, it is important to do a fresh install of all apps rather than "migrate" apps. Repair Permissions immediately before and immediately after each installation.
All I need to do (after Aperture is installed, updated and checked) is replace the default library file with my Aperture library from my previous machine and start Aperture ?
Correct.
My library includes both local and referenced (to a network drive) masters. Am I likely to need to re-establish connection with all of the referenced masters ?
No, Aperture should handle that.
What about keywords and other preferences ? Can someone remind me where these live and what needs to be moved ?
Again, Aperture should handle that.
Good luck!
-Allen Wicks -
Hot to configure sanity-checks ?
Hi All
I went through the support files and found such kind of log messages during peak hours as below,
2010-07-11 11:55:47 | INFO | CPU #000 | Started filtering packets of type 'TCP Non-SYN' received on interface # 0. Reason: Started filtering due to attack detection
2010-07-11 12:00:35 | INFO | CPU #000 | Started filtering packets of type 'TCP No-SYN + RST' received on interface # 0. Reason: Started filtering due to attack detection
2010-07-11 13:07:25 | INFO | CPU #000 | Stopped filtering packets of type 'TCP No-SYN + RST' received on interface # 0. Reason: Stopped filtering for an administrative pause
Basically those logs mean that SCE detect attacks and then in order to protect itself, it put those attack traffic in filter, one hour later, SCE remove the flows from filter and check again, if attack persist, SCE put attack traffic in filter again.
Could we decrease the time for filtering traffic ? like 10 minutes ?Hello,
I believe this is what you're looking for:
SCE8000#>configure
SCE8000(config)#>interface LineCard 0
SCE8000(config if)#>sanity-checks attack-filter times filtering-cycle max-attack-time
SCE8000#>show interface LineCard 0 sanity-checks attack-filter times
Filtering cycle: 3600 seconds.
Max attack time: 86400 seconds.
Hope that helps,
Best regards.
Maybe you are looking for
-
Nano 6th generation corrupt/ resore problem in windows xp?
My 6th generation nano is driving me crazy. I keep getting corrupt/ restore message over and over again. Does anyone know anything about some kind of conflict?
-
I am very new to java,when i wrote my first java program ,the code follows class Example2 { public static void main(String args[]) { int num; num=100; System.out.println("This is num:"+num); num=num*2; System.out.print("the value of num*2 is "); Syst
-
My D-L keys stop working randomly
The only keys affected are the "d-l" keys. I am typing this post on a virtual keyboard so I apoloize for any typos. My computers "d" key has been giving me minor troubles for the past couple months I assume from using it the most. But about a week ag
-
Any one else had an E-mail like this???? Friday, 6 May, 2011 15:11:40 Your BT Internet e-Billing and payment service From: BT email support <[email protected]> Add to Contacts To: Dear Customer, This e-mail has been sent to you by BT to inform you th
-
Can anyone post an overview of the permissions of the server folder
I saved the server data on an external drive. I accidently cut off the power source. All services had failures since then. So I thought I could repair it if I would just restore the whole system from the TM Backup from a time before the cut off. All