Running Total on a Running Total
Post Author: MikeA-ICE
CA Forum: General
I have set up a running total on a field in a subreport and it is calculating correctly. I set the running total in the Report Footer of the report, then I created a variable which passes the running value back to the main report. The variable is placed in a Group Footer on the main report and it resets on each change of the group. However, now I need the grand total of that running total to appear in the Report Footer of the main report. I created a manual running total formula and placed it it in the Report Footer of the main report. Here it is:NumberVar Sect2MatlTotal;WhilePrintingRecords;NumberVar Sect2MatlTotal := NumberVar RunningSect2MatlTotal + {@Material$Var2a} The problem is that the value that comes out is grossly larger than it should be. It should be $112,350,582 but it comes back as $212,603,556, which is nearly double what it should be. Can anyone suggest a method that would allow me to place the running total in the Report Footer of the main report and get the correct value that is visible in the Group Footer just above it?
Post Author: V361
CA Forum: General
you may need to select evaluate on group, or reset on group to get this to work. or just use the shared variable to bring the total down.
Similar Messages
-
How to make sure that after browsing that the webpage is not running in the background, but totally closed down
Double tap the Home button, tap & hold the Safari icon until it starts to wiggle, tap the red minus sign to remove it from the Multi-Tasking bar. Tap the Home button when finished.
-
Percent of running total is returning running percents
I have a running total in a Group footer. I want to print the detail percentage of the group total, but the percent doesn't calculate on the total, but rather on the running balance. For example:
LINE 1 $25 100%
LINE 2 $25 50%
$50
But what I need is:
LINE 1 $25 50%
LINE 2 $25 50%
$50Solved my problem. Used a group total instead of running total.
-
can't seem to sync my iphone 4 running ios 7 with itunes 10.6 running on a mac running osx 10.5.8 What can I do to fix this? Is there an itunes update? or How can I return to the previous ios?
To sync an iOS 7 device you need to be running iTunes 11.1.1; iTunes 10.6 is way too old and won't work. You need to install iTunes 11.1.1, but to do that you need to be running at least Mac OS X 10.6.8.
So you need to do the following:
1. Upgrade your Mac to at least OS X 10.6.8 (later preferably, but 10.6.8 at the miniumum).
a. Check first to see if your model Mac can be upgraded, check that it has enough RAM and so forth (2GB at the least, more if possible).
b. If you can't upgrade your Mac, or don't want to, then you will have to buy a new Mac with the latest version of OS X (currently 10.8.5, soon to become 10.9) and iTunes 11.1.1
2. Install iTunes 11.1.1 on your newly upgraded Mac.
3. Sync your iOS 7 iPhone with iTunes. -
Mac running slow and fan running at high speed
MacPro1,1, osx 10.7.5, 8gb ram
My mac is running slow and fan running at high speed & very loud. On MRI diagnostic it passes everything except this error "CPU Proximity: Can't Read ". I did low level configuration and still having issue with unit.See Below.
Mac running slow and fan running at high speed -
My MacBook Pro is running slowly. I run Mountain Lion on it. I received the following report from Etrecheck. Can someone help me decipher it and provide me with steps to fix the slow speed?
Problem description:
slow computer
EtreCheck version: 2.0.11 (98)
Report generated November 15, 2014 2:57:16 PM EST
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,1
1 2.3 GHz Intel Core i7 CPU: 4-core
4 GB RAM
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 - VRAM: 384 MB
NVIDIA GeForce GT 650M - VRAM: 512 MB
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.8.5 (12F45) - Uptime: 6 days 7:45:47
Disk Information: ℹ️
TOSHIBA MK5065GSXF disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
disk0s1 (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (25.67 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GS31N
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Rowmote Helper.app
[loaded] com.regularrateandrhythm.driver.RowmoteIREmu (1.0 - SDK 10.8) Support
/System/Library/Extensions
[not loaded] com.smarttech.iokit.SMARTBoard (11) Support
[not loaded] com.tectona.driver.PL2303 (1.3.0) Support
[loaded] com.webroot.driver.WebrootSecureAnywhere (54 - SDK 10.7) Support
Problem System Launch Agents: ℹ️
[failed] com.apple.accountsd.plist
[failed] com.apple.AirPlayUIAgent.plist
[failed] com.apple.coreservices.appleid.authentication.plist
[failed] com.apple.lookupd.plist
[failed] com.apple.printtool.agent.plist
[failed] com.apple.scopedbookmarkagent.xpc.plist
Problem System Launch Daemons: ℹ️
[failed] com.apple.coresymbolicationd.plist
[failed] com.apple.wdhelper.plist
Launch Agents: ℹ️
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.smarttech.boardservice.plist Support
[running] com.smarttech.floatingtools.plist Support
[running] com.smarttech.ink.plist Support
[running] com.smarttech.SBWDKService.plist Support
[running] com.smarttech.smartnotification.plist Support
[running] com.smarttech.systemtrayicon.plist Support
[running] com.webroot.WRMacApp.plist Support
[running] com.webroot.WRMacBackNSync.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[running] com.regularrateandrhythm.rowmotehelperaide.plist Support
[running] com.webroot.security.mac.plist Support
[running] com.webroot.webfilter.mac.plist Support
User Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist Support
[running] com.spotify.webhelper.plist Support
User Login Items: ℹ️
Garmin Express Service UNKNOWN (missing value)
iTunesHelper ApplicationHidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Application (/Applications/Dropbox.app)
Spotify Application (/Applications/Spotify.app)
Google Chrome ApplicationHidden (/Applications/Google Chrome.app)
Rowmote Helper Application (/Applications/Rowmote Helper.app)
Internet Plug-ins: ℹ️
Flip4Mac WMV Plugin: Version: 3.2.0.16 - SDK 10.8 Support
FlashPlayer-10.6: Version: 15.0.0.223 - SDK 10.6 Support
npwebroot: Version: 2.0.15 Support
AdobePDFViewerNPAPI: Version: 11.0.06 - SDK 10.6 Support
Flash Player: Version: 15.0.0.223 - SDK 10.6 Support
AdobePDFViewer: Version: 11.0.06 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.1
SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
Unity Web Player: Version: UnityPlayer version 4.5.1f3 - SDK 10.6 Support
Silverlight: Version: 5.1.20513.0 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 51 Check version
Safari Extensions: ℹ️
Password Manager
webfilter
3rd Party Preference Panes: ℹ️
Flash Player Support
Flip4Mac WMV Support
Java Support
SMART Board Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
3% WindowServer
2% iPhoto
2% mds
2% mdworker
1% Google Chrome
Top Processes by Memory: ℹ️
382 MB Mail
275 MB WebProcess
107 MB Google Chrome
103 MB WindowServer
99 MB Google Chrome Helper
Virtual Memory Information: ℹ️
270 MB Free RAM
1.50 GB Active RAM
1.30 GB Inactive RAM
1.22 GB Wired RAM
20.97 GB Page-ins
8.64 GB Page-outsHi Linc
I hope this is what you were after. Looking forward to hearing your feedback.
Thanks, Susanna.
11/16/14 12:36:02.738 PM com.apple.XType.FontHelper[91728]: FontHelper: message received. (<dictionary: 0x7fbb9b606ce0> { count = 2, contents =
"query" => <string: 0x7fbb9b605720> { length = 109, contents = "com_apple_ats_name_postscript == "Roboto-Regular" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
"restricted" => <bool: 0x7fff7912f320>: true
11/16/14 12:36:02.738 PM com.apple.XType.FontHelper[91728]: AutoActivation: scopes (
"/Library/Application Support/Apple/Fonts"
11/16/14 12:36:02.878 PM com.apple.XType.FontHelper[91728]: FontHelper: message received. (<dictionary: 0x7fbb9a41d950> { count = 2, contents =
"query" => <string: 0x7fbb9a41d2e0> { length = 108, contents = "com_apple_ats_name_postscript == "Roboto-Medium" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
"restricted" => <bool: 0x7fff7912f320>: true
11/16/14 12:36:02.878 PM com.apple.XType.FontHelper[91728]: AutoActivation: scopes (
"/Library/Application Support/Apple/Fonts"
11/16/14 12:36:02.889 PM com.apple.XType.FontHelper[91728]: FontHelper: message received. (<dictionary: 0x7fbb9b102580> { count = 2, contents =
"query" => <string: 0x7fbb9b100580> { length = 107, contents = "com_apple_ats_name_postscript == "Roboto-Light" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
"restricted" => <bool: 0x7fff7912f320>: true
11/16/14 12:36:02.889 PM com.apple.XType.FontHelper[91728]: AutoActivation: scopes (
"/Library/Application Support/Apple/Fonts"
11/16/14 12:36:02.898 PM com.apple.XType.FontHelper[91728]: FontHelper: message received. (<dictionary: 0x7fbb9a41d1d0> { count = 2, contents =
"query" => <string: 0x7fbb9a41d2e0> { length = 106, contents = "com_apple_ats_name_postscript == "Roboto-Bold" && kMDItemContentTypeTree != com.adobe.postscript-lwfn-font" }
"restricted" => <bool: 0x7fff7912f320>: true
11/16/14 12:36:02.898 PM com.apple.XType.FontHelper[91728]: AutoActivation: scopes (
"/Library/Application Support/Apple/Fonts"
11/16/14 12:36:03.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91723 [cfprefsd]
11/16/14 12:36:03.784 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91721]) Exited: Killed: 9
11/16/14 12:36:03.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91721 [SleepServicesD]
11/16/14 12:36:08.471 PM com.apple.launchd.peruser.501[159]: (com.apple.tccd[91730]) Exited: Killed: 9
11/16/14 12:36:08.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91730 [tccd]
11/16/14 12:36:09.592 PM com.apple.launchd[1]: (com.apple.xpcd.F5010000-0000-0000-0000-000000000000[91727]) Exited: Killed: 9
11/16/14 12:36:09.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91727 [xpcd]
11/16/14 12:36:13.129 PM com.apple.launchd[1]: (com.apple.XType.FontHelper[91728]) Exited: Killed: 9
11/16/14 12:36:13.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91728 [XType.FontHelper]
11/16/14 12:36:14.996 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91739]) Exited: Killed: 9
11/16/14 12:36:14.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91739 [SleepServicesD]
11/16/14 12:36:20.120 PM com.apple.launchd[1]: (com.apple.cfprefsd.xpc.daemon[76618]) Exited: Killed: 9
11/16/14 12:36:20.000 PM kernel[0]: memorystatus_thread: idle exiting pid 76618 [cfprefsd]
11/16/14 12:36:23.433 PM com.apple.launchd.peruser.501[159]: (com.apple.cfprefsd.xpc.agent[76616]) Exited: Killed: 9
11/16/14 12:36:23.000 PM kernel[0]: memorystatus_thread: idle exiting pid 76616 [cfprefsd]
11/16/14 12:36:26.261 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91752]) Exited: Killed: 9
11/16/14 12:36:26.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91752 [SleepServicesD]
11/16/14 12:36:37.691 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91764]) Exited: Killed: 9
11/16/14 12:36:38.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91764 [SleepServicesD]
11/16/14 12:36:48.938 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91777]) Exited: Killed: 9
11/16/14 12:36:49.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91777 [SleepServicesD]
11/16/14 12:37:01.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91788 [SleepServicesD]
11/16/14 12:37:00.821 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91788]) Exited: Killed: 9
11/16/14 12:37:04.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91706 [distnoted]
11/16/14 12:37:15.656 PM com.apple.launchd[1]: (com.apple.sleepservicesd[91795]) Exited: Killed: 9
11/16/14 12:37:15.000 PM kernel[0]: memorystatus_thread: idle exiting pid 91795 [SleepServicesD]
11/16/14 12:37:27.016 PM ReportCrash[91819]: Failed to create CSSymbolicatorRef for Webroot SecureAnywhere[264]
11/16/14 12:37:27.125 PM ReportCrash[91819]: Failed to create dSYM-less CSSymbolicatorRef for Webroot SecureAnywhere[264]
11/16/14 12:37:27.487 PM com.apple.launchd.peruser.501[159]: (com.webroot.WRMacApp[264]) Job appears to have crashed: Segmentation fault: 11
11/16/14 12:37:30.336 PM com.apple.launchd[1]: (WSDaemon[61]) Exited abnormally: Broken pipe: 13
11/16/14 12:37:34.295 PM WindowServer[79]: CGXDisableUpdate: UI updates were forcibly disabled by application "iPhoto" for over 1.00 seconds. Server has re-enabled them.
11/16/14 12:37:34.594 PM WindowServer[79]: reenable_update_for_connection: UI updates were finally reenabled by application "iPhoto" after 1.30 seconds (server forcibly re-enabled them after 1.00 seconds)
11/16/14 12:37:37.648 PM ReportCrash[91819]: Saved crash report for Webroot SecureAnywhere[264] version 8.0.7.78 (8.0.7.78) to /Users/landerson/Library/Logs/DiagnosticReports/Webroot SecureAnywhere_2014-11-16-123737_lukes-MacBook-Pro.crash
11/16/14 12:37:42.660 PM WindowServer[79]: CGXDisableUpdate: UI updates were forcibly disabled by application "iPhoto" for over 1.00 seconds. Server has re-enabled them.
11/16/14 12:37:43.632 PM WindowServer[79]: reenable_update_for_connection: UI updates were finally reenabled by application "iPhoto" after 1.97 seconds (server forcibly re-enabled them after 1.00 seconds)
11/16/14 12:37:50.783 PM WSDaemon[91822]: CGSRegisterConnectionNotifyProc called with invalid connection
11/16/14 12:38:09.909 PM Problem Reporter[91853]: launch_msg returned m -
How to make function: line amount total and final colum total at the bottom (Acrobat pro 9)?
The form is like this:
col 1
col 2
col 3
col 4
col 5
Row 1
amount
amount
amount
line total
Row 2
amount
amount
amount
line total
Row 3
amount
amount
amount
line total
Row 4
amount
amount
amount
line total
Row 5
colum total
colum total
colum total
colum total
The problem is that even though the calculation seems to be right, the final total, colum totals and some of the line totals don't update. The sum remains zero.
Could there be a wrong tab order? Could somebody tell me the right order? I've tried several variations, but I just can't get it work . Could somebody help me please?
Thanks in advance!It's most likely an incorrect field calculation order, which is not at all related to the tab order. In case you don't know how to set it, select "Forms > Add or Edit Fields" to go into form editing mode, and then select "Forms > Edit > Set Field Calculation Order".
Arrange the order so it makes sense, which looks like it should be:
col 2 total
col 3 total
col 4 total
Row 1 total
Row 2 total
Row 3 total
Row 4 total
Row 5 total
Other arrangements might be just a correct, but it's important that the row totals are in that order. You should also check it again when you have the form ready to distribute to make sure it hasn't changed as you've done further editing. -
How to totally close a running LabVIEW Application
Hello NG,
I have a little problem closing a running LabVIEW Application. For
example I run 2 Applications in parallel. I would like to totally close
one of them. If I use the "Exit LabVIEW" VI both Applications will be
shut down. If I only stop the Application, the not running Front Panel
is still available. How could I close an Application like a normal
Windows program?
Thanks a lot for your help.
Best regards,
MichaelIf you build both applications into seperate executables, I believe Exit LabVIEW should only affect the one where it was run.
If these are 2 VIs running inside LV, you can wire F into FP.Open property of the top level VI. Once the FP of the top level VI closes, the entire hierarchy will be closed as well. This also works with the RTE.
To do this, you need to create a property node (Application Control palette), right click it and select the VI class and select the property.
The other option (basically the same thing) is to use the invoke node with the Close FP method.
Try to take over the world! -
how to get SQL server Total DB size , Total DB free space , Total Data & Log File Sizes and Total Data & Log File free Sizes from a list of server
Hi Shivanq,
To get a list of databases, their sizes and the space available in each on the local SQL instance.
dir SQLSERVER:\SQL\localhost\default\databases | Select Name, Size, SpaceAvailable | ft -auto
This article is also helpful for you to get DB and Log File size information:
Checking Database Space With PowerShell
I hope this helps. -
Running total of another running total ( or some other solution )
I posted in my previous thread that I would like to be able to do rounding at the subtotal level and then have a total of these subtotals. Here is the original thread:
totals in a cross tab report
So I was told that with the cross-tab report I can either do rounding at the details level or at the final total level. However, I need to be able to do the following:
Suppose I receive payments from different states. In my report I would like to be able to display:
- a total of all payments for one given state, rounded to whole dollars - this one is easy because I just create a running total for the payments and then at the end I round it to whole dollars
- a total of all payments and all states as one number. However, the problem I can't figure out here is that this grand total needs to be calculated as the SUM of the totals for each state where the total for each state is rounded to a whole dollar before being added to the grand total. So the rounding should not be done on the final grand total but rather:
1. calculate the total of payments for one state and round it to a whole dollar - let's call it StateTotal ( rounded)
2. calculate the SUM of all StateTotal values. So it needs to be a SUM of the already rounded state totals.
Any help will be greatly appreciated.
thankshello all,
if you want to use a manual running total then that is okay. you don't actually put the manual running total in the cross-tab expert though as you will get a print time error.
you use the "Display String" formula dialogue on an existing cross-tab summary to do the manual running total in.
have a look at the attached sample...there are 2 manual running totals in there...one that goes horizontally (across the columns) and one that goes vertically (down the rows).
there is also a Xtab Info column that is there just to show you how the manual running total counter variables are incremented through the cross-tab. in crystal reports 2008 there are a lot of new cross-tab functions that are different from this but that is a completely different topic.
i hope this helps,
jamie -
Difference: Job run in foreground, job run in background and batch job
Hi Gurus,
Can you please help me to know what are the differences between job run in foreground, job run in background and batch job? Do jobs in foreground run in presentation server? Do jobs in background or batch jobs run in application server?
Thanks,
Kumarforeground job running may cause job running crash or failed if it is too big or server is busy and it take too long time. meantime it will take one sap session.
background job will run base on request server status. and it will not take your sap session. and it will not failed normally.
and you can get the result by SM37.
my experience show that big report run in background normally faster than in foreground.
Edited by: JiQing Zhao on Sep 3, 2010 4:13 AM -
Strange problem... Query runs faster, but report runs slow...
Hi Gurus,
We are using Report 10g on 10g Application server and solaris. we created a report on a table which has 10,000 rows. The report has 25 columns. when we run this query in Toad it took 12 sec for fetching all these 10,000 rows
But when we run the report with Destype = 'FILE' and Desformat = 'DELIMITEDDDATA', it is taking 5 to 8 minutes
to open in excel ( we concatenated mimetype=vnd-msexcel at the end of the url if the Destype=FILE). We removed the layout in the report as it is taking 10 to 15 mins to run to Screen with Desformat=HTML/PDF(formating pages taking more time). We are wondering why DELIMITEDDATA format is taking long time as it runs only query.
Does RWSERVLET take more time of writing the data to the Physical file in the cache dir? Our cache size is 1 GB. we have 2 report servers clustered. Tracing is off.
Please advise me if there are any report server settings to boost the performance.
Thanks alot,
Ram.Duplicate of Strange problem... Query runs faster, but report runs slow... in the Reports forum.
[Thread closed] -
Difference between parant total and parent adj total?
hi experts.
What is the difference between Parent total and Parent adj total in value dimension? can you explain with a simple example.
Your comments will be appreciated
Thanks
SarathHi Sarath,
Hope the below can help you.
Parent Totals: when you save data, financial management automatically calculates totals for the parent members of the dimension hierarchy.
ex : if you enter and save data for the hotel and meals members, a total is calculated for their parent total expenses. ; here the data does not aggregate to parent members until consolidation occurs.
Parent Adjustment : If entities roll up to more than one parent, you can create parent adjustment. Parent adjustments enables you to apply an adjustment for a child to a selected parent, rather than to all parents.
Parent adjustments are available only for parent entities for which the AllowAdjFromchildren application setting is selected.
thank you
Regards,
Mahe -
Calculating 60 days from last run date and sum a total for those 60 days
I need to calculate 60 days from last run date (I will create prompts), then take that number to sum a total of items.
Can someone be of assistance.Hi,
You can create a calculation to calculate 60 days before your run date. e.g. if rundate is your date item then the calculation will be:
rundate-60
Rod West -
What is the back ground job when we run an Attribute Change run ?
Dear One´s,
What is the back ground job when we run an Attribute Change run ?
Thanks in advance,
RajHi Raj,
1. If the attribute change run is triggered through process chain the job name is 'BI_PROCESS_ATTRIBCHAN'
2. If the change run is triggered from RSA1> tools?Appl Heirarchy/Attribute changerun then the job name starts with BI_STRU*
3. If you trigger the program RSDDS_AGGREGATES_MAINTAIN from SE38 then the job name will be RSDDS_AGGREGATES_MAINTAIN
Hope this helps...
Maybe you are looking for
-
IPhone 4 - transfer all content to new phone?
Hello, My iPhone 4 was accidentally dropped in the sink and was exposed to clean water for a second or two. I immediately fished it out and dried it off with a towel. The phone (screen, buttons) was working, though the sound was no longer working. I
-
I am trying to Archive messages in our dev environment. I have completed steps listed in the below document https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/402fae48-0601-0010-3088-85c46a236f50 When I tried to do a read using
-
when I go to youtube or even on my facebook the video's do not play they are a green screen and I can hear what's going on but just don't have a video pleas help
-
CIN-Pricing and Tax Procedure.
Hi CIN experts, How to add Packing and forwarding amount to the base amount of Tax. Scenario: 16% of Excise duty is inclusive of Packing and Forwarding amount. currently system calculating Excise from netvalue. Expecting Valuable reply. Cheers!!! Gop
-
Hello everybody, here is my question: we have a system and we want users to be able to load documents in the database(upload them, they will be stored in BLOB field of a table), to make full text search on them( I think we should use INSO_FILTER for