Running Totals, formula statement works one way, not the other

Here is the problem in a nutshell...
I am designing a report where I am using 2 running totals based on whether a SQL Stored Proc dataset field (text) is Null or Not Null... So I design the 2 running totals and put this code in each "Evaluate"
IsNull({usp_rpt_RemediationData;1.Action})
- and -
NOT IsNull({usp_rpt_RemediationData;1.Action})
The FIRST one works. The SECOND one does not - that is, it does not add a count for it.
In other words, I am just cycling through a table and counting 1 field, checking whether its Null, or not.
Why doesnt this rather simple and straight forward thing work!!!!????
Any help would be most appreciated.

The statement...
NOT IsNull({usp_rpt_RemediationData;1.Action})
DID NOT work when used as part of a running total - even adding the check for blank instead of just null (though the field is truly null).
However, using the EXACT same statement in a formula written for running totals - it does work...? Go figure... I cant explain it.
But thanks for the help!

Similar Messages

Handoff works one way, not the other

between my iOS devices and my Macs, handoff works consistently in the MacOS to iOS handoff direction, but almost never works the other way around. For example, if I open Safari on the Mac, the lock screen on my iOS devices shows a Safari icon, sliding that takes me to the same webpage I was viewing on the Mac. However, if I view a webpage on Safari, I almost never get the extra handoff Safari icon on the Mac dock. What gives? I believed this was supposed to be working properly in iOS 8 already...

Thanks, Jonathan157.
If it can help, I post the same message I posted in a similar thread, as I have 2 iOS devices, iPhone and iPad, an iMac and a MBP Retina 13" that's the one that gives problems but ONLY with official Yosemite. If I use the beta I've installed on a USB disk, everything goes well.
Here's my experience:
I've the same problem as fxdr, on my MacBookPro Retina 13" early 2013.
Main problem is that Continuity works from iOS devices (iPad Air & iPhone 5s) to MBP but not in opposite way.
I already tried to log off and back on in iCloud on all devices, as suggested here by Chris (this topic was one of the first resources I found) without definitive results. On the contrary, it seemed to give me some problems (now vanished) between iOS devices, as they stopped working too. doing it again fixed it
Some more details:
1) both iOS devices work like a charm with my iMac late 2012: first tests were with MBP because I had the chance to update it first.
2) both iOS devices work like a charm with the MBP IF I USE Yosemite BETA that I've installed on an external USB disk. It worked before official release and still works (again tested few hours ago)
3) sometimes, on "normal" MBP, on its own, it starts work or stops without any advice, or works with iPhone but not with iPad or viceversa.
4) It seemed to work when I deactivated FileVault on MBP (Yosemite setup asked for it to activate on first start, while it didn't on iMac, and so I did) but, after some time, it started again to give problems.
5) when I power on MBP with "normal" disk and Yosemite official, if it works, it's not immediate. It starts working after 10-15 minutes. With USB disk and Beta, it's immediate
6) for example, now, with battery at 14% it works from iOS device to MBP only with both devices in both ways, but 30 minutes ago, it didn't in both ways. Powered up iMac and everything works in a flash.
Now, I'm waiting for a call from Apple support. Then, if I can't find a solution, I'll try a recovery. Any suggestions?

Initiate video chat works one way not the other

I can initiate a video chat with my friend. But if he tries to initiate, I get two windows asking me to accept. If I accept either, I get a declined message.
thoughts?

Hi,
You are logged in twice somehow.
This could be as simple as having two connection to the Internet like Ethernet and Wifi at the same time.
It could be you have iChat Forwarded to your phone and that is Wifi'd to your router at the moment.
You could have another app like AdiumX open and logged in which has been known to cause this.
8:41 PM Wednesday; March 17, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

2 identical iPhones-Airprint works one, but not the other?!

My husband and I both have iPhone 4S 32GB. We're using an HP Photosmart 6510 which is both ePrint & Airprint ready. Here's the problem:
I can print via ePrint or Airprint, but my husband's phone will ONLY do ePrint. I don't get it! We have the printer and both iPhones on the same wireless network. He even gets a message that his print job is sending/printing, but nothing prints. I can Airprint the same file from the same e-mail and it works fine. HP is useless...they just keep telling me to reboot the phone and/or reboot the printer. This fixes the problem initially, but a day or two later, the same thing happens. it's very frustrating and I'd really like a permanent fix for this.
Can anyone help?! Please?!
Thank you!!

Thanks for the feedback. It's worth a try. What's making me crazy is why would one phone work and not the other? Rhetorical question, but still making me crazy.

Calendar synching with iphone ok one way, not the other

I've recently acquired the iphone and have been successful synching my calendar (on Entourage) with events entered on the computer, but cannot synch events entred on the iphone back to the computer. any ideas or help for this? Calendering is one of the primary reasons I purchased this phone over other devices because it was said to be compatible with entourage.
Sandra

Try searching on the "Mail, contacts and calendar" list HERE

When downing an app on 3gs phone it says invalid address . worked one day not the next

When trying to download apps on 3gs phone it says invalid address . It worked one day not the next day . Any help would be greatly appreciated. Thanks

Hi Roger,
Welcome to the Apple Dicsussion Pages.
The Alcatel Speedtouch 585 proabably has version 5 firmware on there. I see form your post you know what the problem is.
This can be the problem.
Earlier modes in the 500 series had Firmware versions 3 and 4 which meant you could telnet into them form the Terminal Application and Unbind SIP from port 5060.
This is what is causing the problem.
The symptoms are a starnge pattern of succss and failure.
A small group you can contact all the time
An equally small group of now and then success
And a large group of Buddies that you can never get AV chats with.
ibosie who posts here says he has been in caontact with Alcatel and that they are working on a Firmware update to get round this.
At this stage another modem would be the way to go. (the 510 and the 580 can be Unbound)
Ralph

I have CS6 and CC installed on my mac when I'm using CS6 and use bridge CC activates how can I set this to only work on one and not the other

I have CS6 and CC installed on my mac when I'm using CS6 and use bridge CC activates how can I set this to only work on one and not the other

If you want Bridge CS6 to open when using Photoshop CS6, you must quit Bridge CC.
Then File menu > Browse in Bridge will bring up Bridge CS6.
If Bridge CC is already open, The File > Browse in Bridge for Photoshop CS6 will use Bridge CC and Bridge CS6 will not open.
I hope that's the answer you were looking for.
Gene

Two email accounts, one password for both. will check one but not the other. Have had no problems before

I have 2 email accounts for 2 people. TB will download mail for one but not the other. It can't authenticate the password. Passwords are both the same. Worked fine until today.

The amount of information makes it somewhat hard to give a specific answer. I could only recommend:
* Can you log into the account using the webmail service from your provider?
* Have you verified the settings for the account to be correct (protocol, port number, password encoding)?
The following page gives you a good start with resolving this issue:
https://support.mozilla.org/en-US/products/thunderbird/fix-slowness-crashing-error-messages-and-other-problems/fix-problems-email-providers-gmail-yahoo-etc
Hope this helps!

I have 2 iPod touchs and 1 computer. It will reconize one but not the other. How do I get it to sync music on both

I have 2 older iPod touches and 1 computer. It will reconize one but not the other. How do I sync music on both?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
- Make an appointment at the Genus Bar of an Apple store.
Apple Retail Store - Genius Bar

HT5622 How do I set icloud on 2 ipads.It recognises one,but not the other one?

How do I set up icloud on 2 ipads? It recognises one but not the other one.

Hi Leora Beisly,
Thanks for visiting Apple Support Communities.
Before setting up iCloud on your devices, I recommend updating to the latest iOS software version. This will ensure that you can use all of the iCloud features on your devices. See this article for information on updating your iPads:
Update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht4623
Next, see this page for iCloud setup instructions:
iCloud: Set up iCloud on your devices
http://support.apple.com/kb/PH2609
Before you can use iCloud on each of your devices, you need to sign in to iCloud using your existing Apple ID or a new one, then turn on the iCloud features you want to use.
You may have set up iCloud on your iOS device or Mac when you first used it. To make sure it’s set up correctly, or to set up your iCloud account on another iOS device, computer, or Apple TV, go to the set up iCloud website listed below.
Important: Be sure to use the same Apple ID when you set up iCloud on each device.
Best Regards,
Jeremy

I have 2 iPads, I can only download some apps to one device not the other one?

I have 2 iPads, but can only download some apps to one and not the other?. How can I get the same app on both iPads?
Thanks

1. Make sure iPad is using the latest software
2. Settings>General>Date and Time>Set Automatically>On
3. Make sure Time Zone is correct
4. Reset iPad. Hold the Sleep and Home button down until you see the Apple Logo.

Script works on one site, not the other... why?

Could someone tell me why this prototype-based lightbox seems
to work on one
site but not on the other?
I literally took the exact same .js & css files, copied
them over from one
site to the other, but it's only partially working on the new
site.
http://www.vilverset.com/sample.html
And the original fully-functional one :
http://www.roxanacampagiorni.com/
Been troubleshooting this one for days, and I'm stumped.
Script wants
nothing to do with lightboxing HTML files on the new site.
Only straight
JPGs.

"Michael Fesser" <[email protected]> wrote in message
news:[email protected]..
> .oO(Mark A. Boyd)
>
>>Strange. I don't think I've ever seen these headers
before:
>>
>>
http://www.vilverset.com/tn_posters.html
>>POST /tn_posters.html HTTP/1.1
>>HTTP/1.x 405 Method Not Allowed
>>Allow: GET, HEAD, POST, PUT, DELETE, CONNECT,
OPTIONS, PATCH, PROPFIND,
>>PROPPATCH, MKCOL, COPY, MOVE, LOCK, UNLOCK
>>
>>I suspect a server configuration - or version.
>
> I consider it a script problem. Why does it send a POST
request instead
> of GET? IMHO the server's response is correct, because
it doesn't make
> much sense to POST something to a static .html page.
That's what I told a helper friend of mine, but he told me
the POST is done
by the server, not the JS files. That's why, according to
him, he couldn't
tell me what code to change in the .js files.
But here they are, if you would be so kind as to tell me WHAT
to replace
with WHAT so the call is made properly. :-)
http://www.vilverset.com/scripts/control.modal.2.2.3.js
http://www.vilverset.com/scripts/effects.js
http://www.vilverset.com/scripts/prototype.js
Those are the 3 files needed for the script.
Should I be banging on Dreamhost's door to fix something, or
not? Because
the exact same 3 files will render an HTML page just fine
over on
roxanacampagiorni.com.
Which is the guilty party? The script, or the server config?

I bought a 5th Gen Touch. I use iTunes 12 on two computers. One computer allows me to drag and drop. The other does not.The one that allows it has problems. Any idea as to why I can drag and drop on one and not the other. Both are authorized.

I bought a 5th Gen Touch. I use iTunes 12 on my two computers. I first connected the Touch to my desktop and it allows me to drag and drop mp3 files from my old Classic, which is backed up to a directory. Unfortunately, that computer has gone down before I got a chance to fill the Touch. I have the files on another computer but when I connect the Touch to it, it doesn't allow me to drag and drop the files. I have iCloud set on both systems and I have manual management check marked. I'm not understanding why it allows drag and drop on one PC and not the other when they are both set the same way. My question? What do I need to do to be able to drag and drop in iTunes 12? I didn't do anything special on the computer that allows it so I am at a loss.
Thank you!

Oh, also want to add that the PC I'm currently using is:
Windows Vista Home Premium Service Pack 2
My other PC was:
Windows 7 Ultimate
My MacBook is:
Max OSX 10.5.something (the last update available for it. .8 maybe? haha)
Not sure if this stuff is important, but I thought I'd add it.

2 Apple TV's; Mirroring to one but not the other

Help me Apple Communities you're my only hope.*
I have 2 Apple TV's on the local network, bothe with Airplay enabled. One labelled AppleTV, the other labelled TV Upstairs.While I can happily stream music and video to both devices from iOS or the MacBook Pro, Mirroring is another matter.
On my iPad 2 when I select Airplay to the Apple TV it comes up with the option for Mirroring. However selecting the TV Upstairs Apple TV does not provide this option, and only sound output only, with quite a delay. The iPad 2 is iOS5, and both Apple TV's are latest stable release. The Time Capsule is upstair with the Upstairs AppleTV.
Any ideas for this?
* guess what I was testing video streaming with.

I think you may be suffering from the same issue as many others in that case.
The situation over the current update seems a little unsure at the present time.
4.4 was released, it was then replaced by 4.4.1, which itself was removed and then made available again, it seems from the number of related post that it may have been removed again.
Some posters are still reporting success by updating via iTunes but I can't confirm that these posts weren't simply referring to other times when the updates were available.
I'd be inclined to sit tight and try again at a later time.

USB Headset Works in One Port, Not the Other

When I got my headset (Logitech) it worked perfectly just after plugging it in and using it. It worked while plugged in to either of my USB ports on my laptop. Recently however, it has not worked at all while plugged in to the port on the left, while it still does work when plugged in to the port on the right.
If I open iTunes while plugged in to the non-working left port and make sure to change my system prefs so that the input and output use the Logtech USB Headset, then I hear no sound of any kind. If I then simply plug the USB headset into the other side of the computer without changing any settings, it works fine. This is new behavior as it used to work in both ports.
Another thing to note is that the volume control buttons on the headset still work even when plugged into the USB port that doesn't play sound. Also, I successfully plug in my printer, mouse and other devices to both ports and they all work fine.
I've tried repairing permissions, repairing preferences, and restarting, but nothing has helped so far.
Any ideas on why this would happen with any device?

Which operating system are you running? I have similar problems in a configuration with and iMac and a Macbook, but haven't tried to switch the system around. see this thread:
http://discussions.apple.com/thread.jspa?threadID=2112054&tstart=0
My problem arose when upgrading the iMac to run OS 10.5.8.
I'll try this tomorrow and see if my problem is similar to yours by swopping the system around

Running Totals, formula statement works one way, not the other

Similar Messages

Maybe you are looking for