Running WebLogic10.3 Server with Maximum Memory

Hi
My application is being run on Weblogic 10.3. I am bringing up the weblogic with 7 GB(Xms). I want to make my application to utilize maximun amonut of memory.
Say for example i am starting the WebLogic with 7gb, i should make sure that the application is using 6GB of the memory. Showing 1 GB as free.
Any hints for optimal memory utilization ........ please
Regards
Pavan

Assuming you're running WebLogic on a system with a JVM that can actually use 7 g of RAM, just set the "-Xmx" parameter to "7g" (I'm not sure of the syntax for that). If you want to verify the JVM can actually use that much, then you could also set the "-Xms" parameter to the same value. Then, use either the WebLogic console "Performance" tab (in the "Server" definition) to verify memory usage, or use VisualVM, or some other tool that can monitor the memory state of a JVM.

Similar Messages

SAP Business One 8.8 running on a server with Peer to Peer

Can SAP Business One 8.8 be install and run in a server with a Peer to Peer Operative system?

You have more than one Oracle Release on the Server. hence more than one ORACLE_HOME.
Check which is your default ORACLE_HOME on the server and check which of the homes PERL5LIB environment variable is pointing from both command prompt and in Windows.
That could explain the funny bahaviour. If you change ORACLE_HOME, that could help.

Integrating java application running on OC4J server with EP Iview

Hi,
I Want to Integrate Java Application running on OC4J server with my Enterprise portal
Can any one please help me out in this??
Regards
Padma N

Hi Padma
Its possible to integrate a java application running in the other server with enterprise portal.In portal i think there is a IView template call Java application template.Using this generally we can do this.But in you case what type of a java application is it?Just a class or webapplication or a server side application.This you can also acheive using a webdynpro applications as these are very flexible with integration into EP.In webdynpro you can use suspend and resume plugs to navigate from one application to other application.I have given my ideas how to implement.But integration mainly depends upon your landscape and version compatibilities and type of the application you need to integrate.
Hope this answer helps you in implementation.
Regards
Kalyan

JSK not starting application server with heap memory changes

Hi All,
I'm trying to configure the JSK 11gR1 on 64 bit windows 7 professional personal machine with 8 GB of RAM.
I have no trouble running JSK with default memory settings.
However, when i modified CATALINA_OPTS in Catalina.bat to maximum 1024 , application server is not starting .
Before
CATALINA_OPTS=%CATALINA_OPTS% -Xms384m -Xmx768m
After
CATALINA_OPTS=%CATALINA_OPTS% -Xms384m -Xmx1024m
This is the only change , however JSK is failing with error "Jump Start kit application server failed to start"
Any help would be appreciated.
Other options tried
1. CATALAINA_OPTS with -d64 option
2.Modified windows registry \System\CurrentControlSet\Control\Session Manager\SubSystems

Hi Sarath,
Is there a reason you would like to increase the memory size? JSK is intent not to be used for production but more for demo purposes.
I would suggest to do a full installation.
Cheers,
Rodney

Directory Server with huge memory - performance issue

Hi.
We're using Sun Java System Directory Server 5.2Patch6 on Sun T5240
(UltraSPARC T2) with 64GB memory. Setting DBCache + EntryCache > 20G,
some performance degradation occurred.
(A) Sometimes, ping(ICMP echo/reply) reply time was delayed
(from same network segments, it occasionally becomes response time > 100ms
though time is almost response time < 1ms usually).
(B) Small freeze (OS? SDS?) occrred. LDAP search(from other clients)
response time was delayed(access log's etime was <1, but in my experience,
it was delayed).
I've read follwing article.
http://wikis.sun.com/display/SunJavaSystem/Directory+Server+Cache+Sizing
In this article, suggested pagesize tuning. But using pmap command,
ns-slapd was already using 4M page, and using "ppgsz -o heap=256M",
ns-slapd still using 4M page.
So, I have 2 questions.
(1) How to change pagesize using ns-slapd? I want to use 256M pagesize
(supported by Solaris10 / T5240)
(2) Is the above-mentioned problems, due to pagesize?
Regards,
Nokamoto

Setting DBCache + EntryCache > 20G, some performance degradation occurred.Based on real-world observations, memory consumption of directory server can be upto thrice the configured entry cache size plus db cache size. So we can expect your process size to be inching toward your physical memory limit.This would in turn most likely cause a performance degradation as other processes also need RAM and the OS would start paging to disk.
Do you need to increase cache to 20GB?

Oracle report is not running on application server with more than 700 recod

Hi,
I have developed oracle report using dev suite report builder. When I am running using report builder then its running fine. Whenever I am deploying on application server and trying to run then its not executing. Then I have deployed same report with less than 700 records then its run fine.
Please advice me if you have any solution
thanks in advance
umesh

Hi Pavan,
Thanks for reply.
I have resolved this issue. This issue happen because of report server not able to handle large data. To resolve this issue I have made report server traces service off. Because of making traces off the report server fully utilized for report generation.
Thanks,
Umesh

A thread running in the server

Hey ho, didn't know where else to post this...
I'm running Orion web server with mySQL. What I need is a thread, that would perform certain tasks hourly.
Any tips how to do this ? I don't have any clue.

After some research, I finally found a solution. For those interested, here's the code:
import java.lang.*;
import java.util.*;
import java.sql.*;
import java.text.*;
public class UpdaterThread extends Thread {
      long sleepTime = 1000 * 60 * 60;
      long lastUpdate;
      boolean running = true;
      public UpdaterThread() {
      public void run() {
         while(running) {
               // Do the stuff
            synchronized(this) {
               lastUpdate = System.currentTimeMillis();
                  try {
                     this.wait(sleepTime);
               } catch (Exception e) {
                     e.printStackTrace();
      public String getTimeRemaining() {
            long theTime = System.currentTimeMillis() - lastUpdate;
         theTime = sleepTime - theTime;
         return DateFormat.getInstance().format(new Timestamp(theTime));
      public void stopThread() {
            running = false;
}If someone thinks there is a bug in my code, please tell me asap ! I haven't put this to use yet.

Running Windows Server with Hyper-V on Toshiba Laptop

I will soon be in charge of a Windows server that my company is purchasing to run SQL Server off of. In order to further prepare myself, I want to get some extra practice outside of work with it. However, I'm thinking that my computer's requirements may
not be up to par - and I can't really afford to buy a new computer at the moment.
I have a Toshiba Satellite laptop running Windows 8.1 with an AMD A6-5200, 4 GB RAM and a 600 GB hard drive (HDD, not SSD). I have the book Training Guide: Administering Windows Server 2012 - and it suggests a computer with at least 8GB RAM. Also - the books
examples and exercises use Hyper-V for virtualization.
If my computer couldn't handle doing the exercises and examples - would Windows Server 2008 be a better idea? If so - could you point me in the right direction of guides/books/tutorials for Windows Server 2008 system administration?
Thanks,
-Chris

You can try running the VM with only 2GB of Memory. Also, make sure that no other program is running in the same time other than your hypervisor. You might see some slowness on the VM that way but it should be good to do some practices.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Your backup is from a different version of Microsoft SharePoint Foundation and cannot be restored to a server running The backup file should be restored to a server with version '12.0.0.6318' or later.

am trying to restore the bak file into a new site collection in my sp 2010 standalone env.
am getting error
PS C:\Windows\system32> stsadm -o restore -url http://srvr1-01:123/sites/Repository -filename "C:\mBKUPCOPY\Sharepoint_bankup.bak"
STSADM.EXE : Your backup is from a different version of Microsoft SharePoint Foundation and cannot be restored to a server running
the current version. The backup file should be restored to a server with version '12.0.0.6318' or later.
At line:1 char:1
+ stsadm -o restore -url http://srvr1-01:123/sites/Repository -filename "C: ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (Your backup is ...6318' or later.:String) [], RemoteException
+ FullyQualifiedErrorId : NativeCommandError

As stated in the other thread on this topic you can't restore a 2007 backup to 2010, it needs to be upgraded.
https://social.technet.microsoft.com/Forums/en-US/31c70f0a-5d89-4308-895b-af0c2b249114/restore-the-site-collection-from-moss-2007-to-sp-2010-site-collec?forum=sharepointadminprevious

Issue with opening a site in SharePoint Designer 2010 -The version of SharePoint foundation running on the server is more recent than the version of SPD you are using, you need a more recent version of SPD.

I have a SharePoint site which I am trying to open in SPD 2010, I am getting the following error(some of my team members are able to open)
The version of SharePoint foundation running on the server is more recent than the version of SPD you are using, you need a more recent version of SPD.
These are the ways I tried
1) Earlier I have MS office 32 bit and SPD 32 bit, I uninstalled them and installed both 64 bit versions
2) I uninstalled restarted my machine and installed it again still no use.
3) I installed SPD 2010 Service Pack 2 of 64 bit
4) I uninstalled the SPD 2010 and opened the site—site actions—edit page in SPD , then it asked me to install SPD 2010, then I installed and tried to open the same site, again same error.
How to solve this issue?
I checked permissions also at that site level – I have full control like others. I don’t have access to Central Admin so where else I can check the permission settings?

Please update us SharePoint version
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful.

Msi Big Bang Xpower II can only run with 3 memory modules?

Hello there! I've just got my new system up and running. But it cant boot with 4 memory modules when there is a module in slot 7? I have a 4x8gb kit from corsair (CMP32GX3M4X1600C10), and a Msi Big Bang Xpower II..
When i start it, it just shows me the debug code "67" which is "Late Cpu Initialization" according to the "User Guide".. It stays there, for about 15 seconds, then it shuts down, and does the same, over and over..
Atm, i'm running with 3 modules, and there's no problems at all! I've testet ALL memory blocks, in another computer, and they run just fine..
What should i do?

Quote from: xmad on 25-September-12, 21:09:52
Also, what cpu, bios version , memory type etc
Make sure the mem mods are in the proper slots for tri channel operation.
>>Posting Guide<<
If everything comes up clean, update to the most recent bios. Only do this if your computer is stable in bios. IE You are only having crashes in windows etc.
>>Use the MSI HQ Forum USB flasher<<
http://www.msi.com/product/mb/Big-Bang-XPower-II.html#/?div=BIOS
**Merged
Core i7 3930K, V1.2 Bios, 32GB Corsair Dominator Quad channel 1600Mhz Kit.. The memory are installed as the manual says..

I am having difficulty: we are running a windows server 2003 - mail and outlook support 2007 and upwards, how do I get the brand new apple machines to work with the 2003 version of server

I am having difficulty: we are running a windows server 2003 - mail and outlook support 2007 and upwards, how do I get the brand new apple machines to work with the 2003 version of server

I may be way out, but do you know about this product, would it help integrate the Macs for you.
https://www.thursby.com/sites/default/files/images/ADmitMacv8_SPD.pdf

How can you run a command with elevated rights on a remote server with invoke-command ?

I am trying to run a script on a remote server with invoke-command. The script is starting and is running fine, but the problem is that it should be running with elevated rights on the remote server. On the server where I start the invoke-command, my account has the necessary rights.
The server were I launch the invoke-command is a W2K8 R2. The remote box is a W2K3 with powershell v2.0 installed.
When I launch the script on the remote-box from the command line, I don't get the access denied's.
Is there a way to do this ?
Thanks in advance

The script that I want to run is to install the windows updates. I get an access denied on the download of the updates.
When I execute the script on an W2K8 box, (not remotely) and I run it with non-elevated rights, I get the same error.
The script is running fine when it is launched on W2K3 box locally with a domain account that has local admin rights, or on a W2K8 R2 server with a domain account that has local admin rights, but with elevated rights.
Thanks in advance for your help.
#=== start script ====
param($installOption="TESTINSTALL",$rebootOption="NOREBOOT")
Function Show-Help
Write-Host ""
Write-Host "SCRIPT: $scriptName <installOption> <RebootOption>"
Write-Host ""
Write-Host "DESCRIPTION: Installatie van WSUS updates op de lokale server"
Write-Host ""
Write-Host "PARAMETERS"
Write-Host " -installOption <[INSTALL|TESTINSTALL]>"
Write-Host " -rebootOption <[REBOOT|NOREBOOT|REBOOT_IF_UPDATED]>"
Write-Host ""
Write-Host "EXAMPLE:"
Write-Host "$ScriptName -installOption INSTALL -rebootOption REBOOT_IF_UPDATED"
Write-Host "$ScriptNAme INSTALL NOREBOOT"
Write-Host ""
Write-Host "Indien beide parameter weggelaten worden zijn de defaultwaarden :"
Write-Host " installOption=TESTINSTALL "
Write-Host " RebootOption=NOREBOOT"
Write-Host ""
Exit
#Include alle globale variablen
$CEIF_WIN_PATH = (get-content env:CEIF_WIN_PATH)
$includeFile=$CEIF_WIN_PATH + "\Scripts\include_win.ps1"
. $includeFile
#initialiseer error count
$errcnt=0
$scriptName=$MyInvocation.MyCommand.Name
#argumenten controleren
$arrInstallOption= "TESTINSTALL", "INSTALL" # Mandatory variable with predefined values
If (!($arrInstallOption –contains $installOption)){ Show-Help }
$arrRebootOption = "REBOOT", "NOREBOOT","REBOOT_IF_UPDATED" # Mandatory variable with predefined values
If (!($arrRebootOption –contains $rebootOption)){ Show-Help }
#Logfile opbouwen
$logfile = get-logfileName($MyInvocation.MyCommand.Name)
Log-scriptStart $MyInvocation.MyCommand.Name $logfile
function Get-WIAStatusValue($value)
switch -exact ($value)
0 {"NotStarted"}
1 {"InProgress"}
2 {"Succeeded"}
3 {"SucceededWithErrors"}
4 {"Failed"}
5 {"Aborted"}
function boot-server()
if ($installOption -eq "TESTINSTALL")
logger "TESTINSTALL : - Reboot local Server" $logfile
else
logger " - Reboot local Server" $logfile
$thisServer = gwmi win32_operatingsystem
$thisServer.psbase.Scope.Options.EnablePrivileges = $true
$thisServer.Reboot()
$logmsg="Install option = " + $installOption + ", RebootOption = $rebootOption"
logger "$logmsg" $logfile
logger "" $logfile
logger " - Creating WU COM object" $logfile
$UpdateSession = New-Object -ComObject Microsoft.Update.Session
$UpdateSearcher = $UpdateSession.CreateUpdateSearcher()
logger " - Searching for Updates" $logfile
$SearchResult = $UpdateSearcher.Search("IsAssigned=1 and IsHidden=0 and IsInstalled=0")
logger " - Found [$($SearchResult.Updates.count)] Updates to Download and install" $logfile
$Updates=$($SearchResult.Updates.count)
logger "" $logfile
foreach($Update in $SearchResult.Updates)
if ($Update.EulaAccepted -eq 0)
$Update.AcceptEula()
# Add Update to Collection
$UpdatesCollection = New-Object -ComObject Microsoft.Update.UpdateColl
$UpdatesCollection.Add($Update) | out-null
if ($installOption -eq "TESTINSTALL")
else
# Download
logger " + Downloading Update $($Update.Title)" $logfile
$UpdatesDownloader = $UpdateSession.CreateUpdateDownloader()
$UpdatesDownloader.Updates = $UpdatesCollection
$DownloadResult = $UpdatesDownloader.Download()
$Message = " - Download {0}" -f (Get-WIAStatusValue $DownloadResult.ResultCode)
if ($DownloadResult.ResultCode -eq 4 )
{ $errcnt = 1 }
logger $message $logfile
# Install
logger " - Installing Update" $logfile
$UpdatesInstaller = $UpdateSession.CreateUpdateInstaller()
$UpdatesInstaller.Updates = $UpdatesCollection
$InstallResult = $UpdatesInstaller.Install()
$Message = " - Install {0}" -f (Get-WIAStatusValue $InstallResult.ResultCode)
if ($InstallResult.ResultCode -eq 4 )
{ $errcnt = 1 }
logger $message $logfile
logger "" $logfile
#Indien er een fout gebeurde tijdens download/installatie -> stuur mail naar windowsteam
if ( $errcnt -gt 0 )
logger " - Fout tijdens de uitvoering van script -> send mail" $logfile
$mailSubject=$MyInvocation.MyCommand.Name
$msg = new-object Net.Mail.MailMessage
$att = new-object Net.Mail.Attachment($logfile)
$smtp = new-object Net.Mail.SmtpClient($smtpServer)
$msg.From = $mailFrom
$msg.To.Add($mailTo)
$msg.Subject = $mailSubject
$msg.Body = “Meer details in attachement”
$msg.Attachments.Add($att)
$smtp.Send($msg)
#Moet de server herstart worden ?
if ($rebootOption -eq "REBOOT_IF_UPDATED" )
if ($Updates -gt 0)
#Reboot the server when updates are installed
boot-server
elseif ($rebootOption -eq "REBOOT")
#reboot the server always
boot-server
else
#Do not reboot the server
logger "Do not reboot the server" $logfile
Log-scriptEnd $MyInvocation.MyCommand.Name $logfile
exit 0

How to restrict users working on Windows 7 clients from accessing Windows Explorer and other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2

Dear All,
We are having an infrastructure setup of around 500 client computers managed through group policy.
Recently the domain controllers have been migrated from Windows Server 2003 to Server 2008 R2.
Since this account requires extremely strict environment, we need to figure the solution for restricting the users from access anything locally.
It would be great if you can assist me with the following query.
How to restrict users logged on Windows 7 clients from accessing Windows Explorer and browsing other systems in the network through Group Policy with a domain controller running on Windows Server 2008 r2 ?
Can we disable Network Tab on the left hand pane ?
explorer.exe is blocked already, but users are able to enter the Windows Explorer by clicking on the name which is visible on the Start Menu.

>   * explorer.exe is blocked already, but users are able to enter the
>    Windows Explorer by clicking on the name which is visible on the
>    Start Menu.
You cannot block explorer.exe when you do not replace the shell - the
desktop you see effectively IS explorer.exe...
Your requirement sounds like you need a custom shell:
http://gpsearch.azurewebsites.net/#2812
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Running Windows 2003 Server on Xserve Intel with BootCamp?

Well...
This sounds like awfully bad idea, but one of our clients needs to run Windows 2003 Server for a certain project in their organisation. Fundings for the new hardware is available. Windows-compatible hardware!
The idea here is to get fundings for a new Xserve, run it with Windows 2003 Server in the project and then keep the delicious hardware for free when the project ends. A PC-server would be thrown out of a window in this 100% Mac-centric department.
Windows 2003 Server runs smoothly on a MacPro with Boot Camp and Parallels Desktop. What about the XServe Intel?

Schuckert-
Greetings.
Are you in a position to test the configuration for a while? If so then I vote do it. If not, you could buy a copy of OSX Server and install it on a Mac Pro and try running your software on the XServe platform.
However, depending on your relationship with this client, I would have them sign a release based upon the beta-ness of the software.
A lot of us here are not in a position to give such things a try-just yet. Too busy trying to make things transition smoothly on the accepted configurations.
Although I will say that I suppose a client will eventually pose the question to me (:>)
Luck-
-DaddyPaycheck

Running WebLogic10.3 Server with Maximum Memory

Similar Messages

Maybe you are looking for