Runtime.exe() is not working from within a jar file.
Hi All,
I have a jar file which have classes and a package in it.
One of these classes is calling another class which is present in the package.
The code i am using it is as follows:
Runtime r=Runtime.getRuntime();
Process p=null;
p=r.exec("java deep.slideshow.PlayShow");It is working fine when i am executing it without making jar file.
But when i make a jar file of all these things , this exec() is not working.
I have tried a lot.
If any body has any idea suggest me.
Thanks
thanks a lot for your reply friend.
I tried the same you tell me to do by using the cmd;
java -cp my.jar package.class And then tried to make the jar file with the help of eclipse,
after adding my jar file into classpath of my project in eclipse.
Its working fine on my local system.
But when i put this jar file on some other system it does not call my jar file(obviously bcz it will not the find the jar file according to the classpath set on my local system. )
Is there any way that i can keep this jar into my project and then can give the classpath dynamically
so that it can pick the file from my project automatically.?
Later on i will pack this whole thing into a full jar file and it will work on a single click.
Is it possible or not ?
Please suggest me.
Thanks
Similar Messages
-
Swipe up to control screen not working from within an app?
Hi everyone,
Iphone 4, ios 7.0.6 user. From the home screen, I can "swipe up" on my iphone to get to a control screen where I can control the music player, turn on/off the flashlight, etc. I used to be able to swipe up while within an app (for example, while looking at a website on safari) and get to this same screen, however currently it doesn't work when an app is open, only from the home screen.
Any suggestions to get this working from within an app as well?
thanks,Settings > Control Center > Access Within Apps > Turn switch ON (green side showing)
-
Saving/Printing work from within a .swf file
Okay so here's the deal. I have to create a flash game in
which users will be creating artwork. When users are done with
their artwork we want them to be able to SAVE their work, EMAIL it
to a friend, and PRINT it out all within the .swf file.
HOW IN THE WORLD DO YOU DO THIS?????? I have been searching a
researching and going through many forums and tutorials trying to
see if anyone out there can help but I have come up with nothing.
Although I did come a across a website that was able to achieve
what we are looking to do in this flash game.
Click here to view
Snowflake Website
On this website users can make snowflake art the old fashion
way but this time on the web within a flash site. When users are
satisfied with their snowflake they can save it and the snowflake
is added to an ever growing database of user created snowflakes
that also can be viewed by others at anytime. Users are also given
the option of emailing their snowflake design to friends and
downloading their design as a JPEG or and EPS file. You can also do
the same to any of other numerous snowflake designs with the
snowflake design database.
HOW IN THE WORLD DO YOU DO THIS??? I have contacted the
agency that was responsible for creating this site for their help
as well but any assistance I can get from you guys would be greatly
appreciated as well.
Still quite confused but eagerly awaiting your
responses.Printing object:
on (release) {
//creates the object of the class printjob
var pj:PrintJob = new PrintJob();
//starts the procedure
//opens the windows printing window
pj.start();
//sets the printing area (i may be made outside the stage,
so using the A4 area and adding any other information that should
not appear on screen)
area = {xMin:0, yMin:28, xMax:465, yMax:296};
//printing options - true=bitmap / false-=vetor... bitmap
generates a bigger file, but results in better quality for images,
vector is smaller and a good option if you work just with text
options = {printAsBitmap:true};
//adds the page the the printing queue
pj.addPage(_root, area, options, null);
//sends the page to the printer
pj.send();
//deletes the object to clear memory (very important)
delete pj; -
Acrobat 8.1.4 not working from within Outlook
I am using Acrobat 8.1.4 and Outlook 2007 SP1.
Acrobat working fine from other apps but the "Convert to PDF" button in Outlook isn't working.
Outlook showing "nothing disabled"
I get the following useless message:
===================================================
Requested: 1,
Converted to PDF: 0,
Skipped [Already in PDF]: 0,
Skipped [PDFMaker failed to convert]: 1
Details of Email to PDF conversion:
Failed to Convert:
From: Doe, James, Subject: RE: Self Assessment, Date: 5/19/2009, Status: Item failed to convertI've had extremely patchy success in getting Acrobat and Office to play together, as have plenty of others, take a look at this thread: http://forums.adobe.com/message/1168097#1168097
When you say nothing disabled are you aware that there are several places that addins are shown? When you go Tools>Trust Center>Addins there is a box down the bottom with several choices, it would pay to check all of these too. -
Reading a text-file from within a Jar-file...
I've made a program, that reads from a text-file. And it works great. But when I try to put the program into a jarfile, I get a fileNotFoundException... I have the textfile both inside and outside the jarfile... with the same result.
Does anyone know what I might be doing wrong?
Thanx in advance!
MartinDepends on the path you enter for the text file. If you simply put "filename.txt" then you should try to have the file in the same directory as the class which accesses the file.
Cheers,
H�vard -
Disp+work.exe is not working
Hi Gurus.........i have system ecc6.0 installed , unfortunatly the disp+work.exe is not working (gray in color) .Please help me out.
below is the dev_dsp file details :
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid EC6
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 75
intno 20050900
make: multithreaded, Unicode, optimized
pid 2196
Fri Sep 19 21:26:44 2008
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 2196) [dpxxdisp.c 1237]
shared lib "dw_xml.dll" version 75 successfully loaded
shared lib "dw_xtc.dll" version 75 successfully loaded
shared lib "dw_stl.dll" version 75 successfully loaded
shared lib "dw_gui.dll" version 75 successfully loaded
shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri Sep 19 21:26:49 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >gcecc6_EC6_00 <
DpShMCreate: sizeof(wp_adm) 18304 (1408)
DpShMCreate: sizeof(tm_adm) 3994272 (19872)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1440)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 05EF0040, size: 4653368)
DpShMCreate: allocated sys_adm at 05EF0040
DpShMCreate: allocated wp_adm at 05EF1E40
DpShMCreate: allocated tm_adm_list at 05EF65C0
DpShMCreate: allocated tm_adm at 05EF65F0
DpShMCreate: allocated wp_ca_adm at 062C5890
DpShMCreate: allocated appc_ca_adm at 062CB650
DpShMCreate: allocated comm_adm at 062CD590
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0634E450
DpShMCreate: allocated gw_adm at 0634E490
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0634E4C0
DpShMCreate: allocated wall_adm at 0634E4C8
MBUF state OFF
DpCommInitTable: init table for 500 entries
Fri Sep 19 21:26:50 2008
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
Fri Sep 19 21:26:52 2008
J2EE server info
start = TRUE
state = STARTED
pid = 2628
argv[0] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[1] = C:\usr\sap\EC6\DVEBMGS00\exe\jcontrol.EXE
argv[2] = pf=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1044
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=EC6
argv[7] = -DSAPMYNAME=gcecc6_EC6_00
argv[8] = -DSAPPROFILE=C:\usr\sap\EC6\SYS\profile\EC6_DVEBMGS00_gcecc6
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
Fri Sep 19 21:26:55 2008
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1623]
Fri Sep 19 21:27:06 2008
***LOG Q0K=> DpMsAttach, mscon ( gcecc6) [dpxxdisp.c 11586]
Fri Sep 19 21:27:12 2008
DpStartStopMsg: send start message (myname is >gcecc6_EC6_00 <)
DpStartStopMsg: start msg sent
Fri Sep 19 21:27:20 2008
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
Fri Sep 19 21:28:30 2008
CCMS: start to initalize 3.X shared alert area (first segment).
Fri Sep 19 21:28:33 2008
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 75
Release check o.K.
Fri Sep 19 21:28:52 2008
ERROR => W0 (pid 2636) died [dpxxdisp.c 14241]
ERROR => W1 (pid 2644) died [dpxxdisp.c 14241]
ERROR => W2 (pid 2652) died [dpxxdisp.c 14241]
ERROR => W3 (pid 1632) died [dpxxdisp.c 14241]
ERROR => W4 (pid 908) died [dpxxdisp.c 14241]
ERROR => W5 (pid 2660) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W6 (pid 2668) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W7 (pid 2676) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W8 (pid 2684) died [dpxxdisp.c 14241]
ERROR => W9 (pid 640) died [dpxxdisp.c 14241]
ERROR => W10 (pid 2692) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W11 (pid 2700) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W12 (pid 732) died [dpxxdisp.c 14241]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 19 21:29:02 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri Sep 19 15:59:02 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 2636 Ended no 1 0 0
1 DIA 2644 Ended no 1 0 0
2 DIA 2652 Ended no 1 0 0
3 DIA 1632 Ended no 1 0 0
4 DIA 908 Ended no 1 0 0
5 DIA 2660 Ended no 1 0 0
6 UPD 2668 Ended no 1 0 0
7 ENQ 2676 Ended no 1 0 0
8 BTC 2684 Ended no 1 0 0
9 BTC 640 Ended no 1 0 0
10 BTC 2692 Ended no 1 0 0
11 SPO 2700 Ended no 1 0 0
12 UP2 732 Ended no 1 0 0
Dispatcher Queue Statistics Fri Sep 19 15:59:02 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
1
2000
1
1
--------++++--
+
DIA
5
5
2000
5
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
1
1
2000
1
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 10
wake_evt_udp_now 0
wake events total 6, udp 2 ( 33%), shm 4 ( 66%)
since last update total 6, udp 2 ( 33%), shm 4 ( 66%)
Dump of tm_adm structure: Fri Sep 19 15:59:02 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Sep 19 15:59:02 2008
=============================
Slots: 300, Used: 1, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1637
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Sep 19 21:29:07 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >gcecc6_EC6_00 < (normal)
DpJ2eeDisableRestart
MsIDelService: delete service J2EE for myself
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=161,pac=1,MESG_IO)
MsINiWrite: sent 161 bytes
send msg (len 110+51) to name MSG_SERVER, type 0, key -
MsSndName: MS_DEL_PROPERTY ok
Send 51 bytes to MSG_SERVER
MS_DEL_PROPERTY : asynchronous call
send MsDelService(J2EE) to msgserver
DpIJ2eeShutdown: send SIGINT to SAP J2EE startup framework (pid=2628)
killing process (2628) (SOFT_KILL)
DpIJ2eeShutdown: j2ee state = SHUTDOWN
NiBufISelUpdate: new MODE -- (r-) for hdl 4 in set0
SiSelNSet: set events of sock 1508 to: ---
NiBufISelRemove: remove hdl 4 from set0
SiSelNRemove: removed sock 1508 (pos=2)
SiSelNRemove: removed sock 1508
NiSelIRemove: removed hdl 4
DpDelSocketInfo: del info for socket 4 (type=8)
NiICloseHandle: shutdown and close hdl 4 / sock 1508
NiBufIClose: clear extension for hdl 4
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: hdl 3 sent data (wrt=110,pac=1,MESG_IO)
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiBufISelUpdate: new MODE -- (r-) for hdl 3 in set0
SiSelNSet: set events of sock 1536 to: ---
NiBufISelRemove: remove hdl 3 from set0
SiSelNRemove: removed sock 1536 (pos=3)
SiSelNRemove: removed sock 1536
NiSelIRemove: removed hdl 3
MBUF state OFF
AdGetSelfIdentRecord: > <
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 1/300/13
LOCK WP ca_blk 1
make DISP owner of wp_ca_blk 1
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 16)
MBUF component DOWN
NiICloseHandle: shutdown and close hdl 3 / sock 1536
NiBufIClose: clear extension for hdl 3
MsIDetach: detach MS-system
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 2196) [dpxxdisp.c 10259]
Good Bye .....The work process are dying
ERROR => W1 (pid 2644) died [dpxxdisp.c 14241] *** ERROR => W2 (pid 2652) died [dpxxdisp.c 14241
This lead the dispatcher to emergency shutdow:
DISPATCHER EMERGENCY SHUTDOWN ***
if the dispatcher cannot start the work process it force the shutdown.So, you need to check
at the work process trace (dev_w*) files to find out the reason the they are dying.
@deeptss
if you are talking about the WARNING
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0)took 5 seconds ***
this is a normal situation if the reverse name resolution is not working.
I have found this error when the DNS server has without the reverse zone configured.
However this is not a problem to the dispatcher operation.
Cheers
Clebio -
I am having issues with Sidebar files not appearing from within InDesign CS5.5. They show up fine from other Adobe applications. Using OS10.6.8.
I would first of all trash the preference file for InDesign, make sure the application is closed then find the prefs in
/Users/USER NAME/Library/Preferences/Adobe InDesign and just throw the entire folder away, it will generate a new one after you launch InDesign again.
Now launch InDesign and see if the problems are resolved.
If not I would repair your permissions on your hard drive wih disk utility, and if that fails then di-install InDesign and re-install that single application.
Let me know if any of these suggestions work for you
I will be checking my email although you might have to wait for a response as I will be taking a microlight flight over the Victoria Falls tomorrow. Yay can hardly wait. -
File- Print not working from SQL Developer 1.2.1 Build MAIN-32.13
File->Print not working from SQL Developer 1.2.1 Build MAIN-32.13.
I downloaded sqldeveloper-1.2.1.3213.ZIP and extract to a local directory. From the extracted directory I ran ..\sqldeveloper\sqldeveloper.exe from Windows XP sp2. The program itself seems to run just fine but File-Print doesn't do anything. In Help-About, Java Platform is reported as 1.5.0_06 and Oracle IDE is 1.2.1.3213. I'm not sure where to look for what is causing the problem.
ThanksI hadn't tried CTRL-P before but I did today. On the first attempt, I saw a small jump in the memory usage for sqldeveloper.exe as reported in Windows Task Manager. Otherwise, there was no change. A second CTRL-P in the same session produced a further bump but subsequent attempts in the same session produced no further change in CPU or Memory Usage.
Using Task Manager to monitor this further, I tried File->Print again and saw that sqldeveloper would periodically climb to 1 or 2 percent CPU and consume a little more memory. After a minute or so, though, all activity stops again.
I do not get a print dialog box from SQLDeveloper using either CTRL-P or File->Print -
Hi all , I have an exchange 2010 SP 2 environment with 2 sites , the remote site FL free busy has NEVER worked and I get this error on the remote site , is this related ?
thanks
Log Name: Application
Source: System.ServiceModel 3.0.0.0
Date: :
Event ID: 3
Task Category: WebHost
Level: Error
Keywords: Classic
User: SYSTEM
Computer: FL-CAS1.WOMBAT.LOCAL
free bust works from WITHIN the remote (FL ) site , but NEVER to the main (WASH) site , it has Never worked ,I am thing that this error is related
thanks I have no idea how to fix
Description:
WebHost failed to process a request.
Sender Information: System.ServiceModel.ServiceHostingEnvironment+HostingManager/17256489
Exception: System.ServiceModel.ServiceActivationException:
The service '/EWS/exchange.asmx' cannot be activated due to an exception during compilation. The exception message is: Could not find a base address that matches scheme http for the endpoint with binding CustomBinding. Registered base address schemes
are [https].. ---> System.InvalidOperationException:
Could not find a base address that matches scheme http for the endpoint with binding
++++Hi
This issue could be with corruption in Autodiscover and web services virtual directory
Replace Web.config file for Autodiscover and web services virtual directory from the other working site
Delete and Recreate Autodiscover and web services virtual directory
Do this only on the affected site
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com Thanks Sathish
(MVP) -
External Task not working from job
Hi,
I am trying to call a batch file which copied fdr files from one folder to another and runs sarmanalyzer to generate csv files in the edq landing area.
The batch file is working fine when called from command prompt or double clicked in the edq server, but does not work as expected when called from project or job.
I generated a log file which confirms that the log file is being executed by the job to the last line, but the file copying and sarmanalyzer commands simply do not work.
Any pointers are greatly appreciated.
Thanks,
SidHi Nick,
Thanks for help!
My bat file runs without any errors from external tasks in EDQ.
The account has full control on all the shared folders i am using.
My script:
set ss_temp_dir=D:\Datanomic\dnDirector\config\landingarea\EDQ_Notification
echo s1 > log.txt
set srm_analyzer_path=\\<appsrvr4>\d$\sba81\siebsrvr\BIN
echo s2 >>log.txt
COPY /Y \\<appsrvr1>\d$\sba81\siebsrvr\BIN\*.fdr \\qssdvucmgtw301\siebfile\FDR
COPY /Y \\<appsrvr2>\d$\sba81\siebsrvr\BIN\*.fdr \\qssdvucmgtw301\siebfile\FDR
COPY /Y \\<appsrvr3>\d$\sba81\siebsrvr\BIN\*.fdr \\qssdvucmgtw301\siebfile\FDR
:: The above copy is not working from EDQ - no files copied - running the commands from cmd or double clicking the bat works fine for all commands.
echo s3 >>log.txt
:: log s1-s2-s3 created in commandarea.
setLocal DisableDelayedExpansion
pushd \\<sharedloc>\siebfile\FDR\
setLocal EnableDelayedExpansion
echo s4 >>log.txt
for /f "tokens=* delims= " %%G in ('dir/b/od T*.fdr') do (set newest=%%G)
echo s5 >>log.txt
copy %newest% %ss_temp_dir%
echo s6 >>log.txt
:: log s4-s5-s6 created in \\<sharedloc>\siebfile\FDR\
pushd %ss_temp_dir%
echo s7 >>log.txt
for %%F in (%ss_temp_dir%\*.fdr) do (
::set outfile=%ss_temp_dir%\%%~nF.csv &&
%srm_analyzer_path%\sarmanalyzer.exe -o %ss_temp_dir%\Snapshot_Working_CSV.csv -x -f %%F
:: The above saqrm_analyzer is not working from EDQ - no files copied - running the commands from cmd or double clicking the bat works fine for all commands.
echo s8 >>log.txt
MOVE /Y %ss_temp_dir%\*.fdr %ss_temp_dir%\BU\
echo s9 >>log.txt
:: The above move is not working from EDQ - no files copied - running the commands from cmd or double clicking the bat works fine for all commands.
::Log s7-s8-s9 created in %ss_temp_dir%
Thanks,
Sid -
Dashboard link is not working from BI Publisher
Dashboard link is not working from BI Publisher. Please let me know How to fix this problem.
Please somebody guide me.
Dashboard link is working fine from the Apps Server Machine. But the link is not working from other machines. Do I need to setup machine.domain:<port_number> any where.
Thanks,
Vara -
My mail is not working from my iPod touch. I looked it up and it says it trouble shooting? But they are not giving me anything to fix it. I restored my iPod touch to see if that worked and it didnt. Can anyone help me?
Can you access the account from another device?
Without you telling use the email provider and type of account we can't really help you. -
HP Pavilion dv6-6181TX. System Recovery is not working From HP Recovery Manager.
HP Pavilion dv6-6181TX
Product No. A3U49PA
Genuine Windows 7 Home Premium 64
(but i upgraded it to windows 7 ultimate)
System Recovery is not working From HP Recovery Manager. so i cant restore my laptop to its original factory condition. (Genuine Windows 7 Home Premium).
so when i restart my computer and press Esc and then choose F11 i get this message :
"Windows failed to start. A recent hardware or software change might be the
cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
If you do not have this disc, contact your system administrator or computer
manufacturer for assistance.
File: \Boot\BCD
Status: 0xc0000225
Info: An error occured while attempting to read the boot configuration data."
i saw this from the forum
http://h30434.www3.hp.com/t5/Notebook-Recovery/Hp-recovery-manager-problems/m-p/2395473/highlight/tr...
Had the C partition been split/shrunk to form a new partition previously?
Does disk management show the HDD as basic or dynamic? (Start>Right-click Computer>Manage>disk management on the left).
If it has been switched to dynamic (Windows does this automatically when more than 4 partitions are present on the disk), then the F11 recovery partition won't function until it is restored to basic, but I would like to confirm that is the scenario before providing those steps.
The Disk management shows that my HDD as Dynamic, what should i do then if this is the case and the possible solution to my problem?
please help me & Thank you for your time,
This question was solved.
View Solution.If you have more than 4 partitions you will need to delete the extra partition/partitions, then convert the hdd back to Basic.
Older versions of Partiton Wizard Free work:
http://www.sevenforums.com/tutorials/26829-convert-dynamic-disk-basic-disk.html
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
The file to download the app for Android is not working from my phone--it says that the file isn't there. However it does see the one for the Iphone (even though it can't use it). I've tried it multiple times and continue to get the same message: "NOT FOUND The requested item could not be found". I also tried through the Market application on the phone but ended-up with the same result.
I'm very computer literate and am pretty sure the problem is on your end. If this is the case then no one can download the app. I considered that perhaps because it's still in Beta that it was removed due to some other type of software issue. I would really like to use Firefox on my new Droid (2.0); when with this be available?Firefox will not appear in the Market for most phones with incompatible hardware. You can check if your phone is supported here:
https://wiki.mozilla.org/Mobile/Platforms/Android
Even on some supported devices, a bug in the Market software prevents Firefox from showing up. This may be related to the fairly recent Android Market app update. If you go to Settings/Applications/Market and choose "Uninstall" you can uninstall the update, and then search for and install Firefox from the marketplace.
Or, if you have a supported phone, you can download the app directly by typing this address into your phone's browser: http://bit.ly/fxbeta3
(Note: To download the app directly for an AT&T phone, you will have to search for instructions on "sideloading" the APK file, since AT&T disables the option to install from non-Market sources.) -
In 5s, personal hot spot does not work from time to time. Not detected
In 5s, personal hot spot does not work from time to time. Iphone does not get detected on Wi-fi or bluetooth. Restarting or rebooting does not help.
Settings, general, reset and reset network settings. Clear out your network settings and set personal hotspot again.
also avoid special characters making a password. hashtags or open brackets for example doesn't work too good.
Maybe you are looking for
-
Open a QueryView from Portal in SAP Analyzer
Hey guys, I have a Query Q1 and a view V_Q1 which was created in SAP Analyzer 7.0. I know how to publish V_Q1 to Portal, see http://help.sap.com/saphelp_nw70/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/content.htm But using the tecnique above, V_Q
-
Hey everybody, I'm looking for an iPhone 5 case, preferably dual layer and even a little thick (I like thicker cases for some reason ). I've tried the OtterBox Commuter but I don't like how the Apple logo is exposed. I have the Defender, but obviousl
-
Doubts over the Performance in Developing a Chat application
We are developing a chat application which needs to update the chat content in the database for the duration of the chat (ie.,For the duration of a session).At the same time the page should refresh and show the current content on both ends.In additio
-
Dynamic Table Input Field - Disabled in runtime
Hi, I have dynamically created a node. The node as a string attribute X. Then dynamically created a IWDTable to bind to the node. In the table I have a column, then a tablecelleditor of inputfield. The inputfield 'value' is binded to node->X attribut
-
Hi All, i have a doubt. Error DTP is used to to edit the error records then to load tha data And error DTP is always full load. If a have 100 records in my error DTP with same kind of problem eg:Special char problem do i need to edit all the 100 reco