RV042 TLS Security Scan Failure
Hi,
As part of my business' PCI compliance regime, we are regularly scanned for vulnerabilities. Today we started getting notifications of failure on all of the QuickVPN ports (443, 60443) for the following:
Details: Multiple Vendor TLS Protocol Session Renegotiation Security Vulnerability
06/11/12
CVE 2009-3555
Multiple vendors TLS protocol implementations are prone to a security vulnerability related to the session-renegotiation process which allows man-in-the-middle attackers to insert data into HTTPS sessions,
and possibly other types of sessions protected by TLS or SSL, by sending an unauthenticated request that is processed retroactively by a server in a post-renegotiation context.
Cisco, will you be issuing a firmware update to address this anytime in the near future? Presumably it effects all the other RV routers as well.
Hi Mike,
I did a scan against the RV042G looking for which methods it can negotiate at for the SSL/TLS connections and some of them are below 256bits. At this time I am not aware of any plans to change this. However, if you were to open a case with Cisco Small Business by calling 1-866-606-1866 we could open a service request based on the PCI issues you are seeing and request development to look further into SSL/TLS negotiation process. Be sure to let the engineer you speak know about this forum post.
Thanks,
Jason Nickle
Similar Messages
-
Hello,
We are facing an issue when triggering a new build using TFS 2013 Update 4, VS2013 Update 4 using TFVCTemplate.12.XAML template. All our other older build definitions just work fine but not the TFVCTemplate.12.XAML. It seems to me that some certificate
might be invalidated. Can anyone please point me in the right direction?
Thanks,
Mitul
TF215097: An error occurred while initializing a build for build definition :
Exception Message: One or more errors occurred. (type AggregateException)
Exception Stack Trace: at System.Threading.Tasks.Task`1.GetResultCore(Boolean waitCompletionNotification)
at Microsoft.TeamFoundation.Build.Client.FileContainerHelper.GetFile(TfsTeamProjectCollection projectCollection, String itemPath, Stream outputStream)
at Microsoft.TeamFoundation.Build.Client.FileContainerHelper.GetFileAsString(TfsTeamProjectCollection projectCollection, String itemPath)
at Microsoft.TeamFoundation.Build.Client.ProcessTemplate.Download(String sourceGetVersion)
at Microsoft.TeamFoundation.Build.Hosting.BuildControllerWorkflowManager.PrepareRequestForBuild(WorkflowManagerActivity activity, IBuildDetail build, WorkflowRequest request, IDictionary`2 dataContext)
at Microsoft.TeamFoundation.Build.Hosting.BuildWorkflowManager.TryStartWorkflow(WorkflowRequest request, WorkflowManagerActivity activity, BuildWorkflowInstance& workflowInstance, Exception& error, Boolean& syncLockTaken)
Inner Exception Details:
Exception Message: An error occurred while sending the request. (type HttpRequestException)
Exception Stack Trace: at Microsoft.VisualStudio.Services.WebApi.VssHttpRetryMessageHandler.<SendAsync>d__1.MoveNext()
--- End of stack trace from previous location where exception was thrown ---
at System.Runtime.CompilerServices.TaskAwaiter.ThrowForNonSuccess(Task task)
at System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task task)
at System.Runtime.CompilerServices.ConfiguredTaskAwaitable`1.ConfiguredTaskAwaiter.GetResult()
at Microsoft.VisualStudio.Services.WebApi.HttpClientExtensions.<DownloadFileFromTfsAsync>d__2.MoveNext()
Inner Exception Details:
Exception Message: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. (type WebException)Exception Stack Trace: at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.Http.HttpClientHandler.GetResponseCallback(IAsyncResult ar)
Inner Exception Details:
Exception Message: The remote certificate is invalid according to the validation procedure. (type AuthenticationException)
Exception Stack Trace: at System.Net.TlsStream.EndWrite(IAsyncResult asyncResult)
at System.Net.ConnectStream.WriteHeadersCallback(IAsyncResult ar)Hi Mitul,
Thanks for your reply.
It’s strange, if your old build definitions can work using the same TFS Build Server, that indicate your TFS Server configuration is correct and can works. But only new build definition with default TfvcTemplate.12.xaml template cannot build successful.
Please share your TFS Server detailed environment information here. And share your
Build Service Properties dialog screenshot here.
Try to clean the Cache for TFS 2013 manually(delete the content of the folder only, not the cache folder itself):
Clean the Cache folder on Server machine. The folder path is:
C:\Program Files\Microsoft Team Foundation Server 12.0\Application Tier\Web Services\_tfs_data.
After cleaned, on Server machine, click Start and select
Run… to open the dialog box, then input iisreset.exe and click OK, wait it run completely.
Additionally, you can run the TFS 2013 Power Tools BPA to scan the installation of your TFS Server.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Hi, experts
I'm trying to configure a lab environment according tutorial http://www.msexchange.org/articles-tutorials/exchange-server-2010/compliance-policies-archiving/rights-management-server-exchange-2010-part3.html
After completing configuration, I execute cmdlet Set-IRMConfiguration -InternalLicensingEnabled $true, but get error
The remote certificate is invalid according to the validation procedure. ---> The underlying connection was closed: Cou
ld not establish trust relationship for the SSL/TLS secure channel. ---> Failed to get Server Info from https://exhv-65
94/_wmcs/certification/server.asmx.
+ CategoryInfo : InvalidOperation: (:) [Set-IRMConfiguration], Exception
+ FullyQualifiedErrorId : C810E449,Microsoft.Exchange.Management.RightsManagement.SetIRMConfiguration
Then I run cmdlet Test-IRMConfiguration -Sender [email protected] and get error
Results : Checking Exchange Server ...
- PASS: Exchange Server is running in Enterprise.
Loading IRM configuration ...
- PASS: IRM configuration loaded successfully.
Retrieving RMS Certification Uri ...
- PASS: RMS Certification Uri: https://server1/_wmcs/certification.
Verifying RMS version for https://server1/_wmcs/certification ...
- WARNING: Failed to verify RMS version. IRM features require AD RMS on Windows Server 2008 SP2 with the
hotfixes specified in Knowledge Base article 973247 (http://go.microsoft.com/fwlink/?linkid=3052&kbid=973247)
or AD RMS on Windows Server 2008 R2.
Microsoft.Exchange.Security.RightsManagement.RightsManagementException: Failed to get Server Info from https:
//server1/_wmcs/certification/server.asmx. ---> System.Net.WebException: The underlying connection was clos
ed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authenticatio
n.AuthenticationException: The remote certificate is invalid according to the validation procedure.
at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest async
Request, Exception exception)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest async
Request)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest async
Request)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest async
Request)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequ
est asyncRequest)
at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Obje
ct state)
at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
at System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size)
at System.Net.ConnectStream.WriteHeaders(Boolean async)
--- End of inner exception stack trace ---
at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request)
at System.Web.Services.Protocols.HttpWebClientProtocol.GetWebResponse(WebRequest request)
at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
at Microsoft.Exchange.Security.RightsManagement.SOAP.Server.ServerWS.GetServerInfo(ServerInfoRequest[] req
uests)
at Microsoft.Exchange.Security.RightsManagement.ServerWSManager.ValidateServiceVersion(String featureXPath
--- End of inner exception stack trace ---
at Microsoft.Exchange.Security.RightsManagement.ServerWSManager.ValidateServiceVersion(String featureXPath
at Microsoft.Exchange.Management.RightsManagement.IRMConfigurationValidator.ValidateRmsVersion(Uri uri, Se
rviceType serviceType)
at Microsoft.Exchange.Management.RightsManagement.IRMConfigurationValidator.TryGetRacAndClc()
OVERALL RESULT: PASS with warnings on disabled features
From the error message, this issue seem to related with SSL/TLS connection. So I go back to check configuration and find out a difference to tutorial. Current SCP url is https://server1/_wmcs/certification, but in tutorial it is https://server1:433/_wmcs/certification.
On my opinion, I don't think it is the real reason.
So, how can I resolve this error? Could you give me some suggestion? Thanks in advance.
System Info:
Windows Server 2008 R2 + Exchange Server 2010 SP3 RTMHi
Please have a try with the solution on this KB article
“Error message when you try to test access from the Microsoft Dynamics CRM E-mail Router: "Incoming Status: Failure - The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel"”
http://support.microsoft.com/kb/954584/en-us
Cheers
Zi Feng
TechNet Community Support -
My PC fails security scan when downloading Adobe reader
My PC fails security scan when installing Adobe Reader
I have Windows 7. When I try to download anything like a PDF, Adobe reader or any external file, the process includes a security scan. It could be before the download or after it is complete, but at a point before download or before it can be opened, the the message says that it failed or failed the security scan.
I tried to troubleshoot Windows 7 and get as error message: 0x800B010E. It could it be related to the software download problem where I get message other than security failure or it won't load.
I have Windows 7 Enterprise, Version 6.1( Build 7601: Service Pack 1)
Ted McCarthy -
I received an email that I now know to be malicious and inadvertently opened up the attachment on my IPad that I've been informed will download malware or a virus. Can my IPad be infected this way or does anyone know if there is a way of running a security scan to check if there is a problem? I do have the most up to date IOS software installed.
There is no anti-malware for iOS, at least none that actually does anything useful. The odds of getting any malware infection via an email attachment on an iOS device is quite low - practically non-existent. Unless you are seeing any issues, there isn't much to do, other than deleting the email and being more cautious in the future.
-
Yoga 2 Kernel Security Check Failure
I have this Yoga 2 13' for almost two months. A few days after my purchase, the computer suddenly gave a blue screen and restarted. Then this BSODs became more frequent. The strange thing is that, I was in France for almost a month, and no BSODs happened. Now that I am in Turkey for a few days, the PC started to give out kernel security check failures.
Any suggestions for the resolution of the problem. Cause it's quite annoying to wait for the PC to crush before doing anything?
Here are the details for dump files:
computer name: BAHADIR
windows version: Windows 8.1 , 6.2, build: 9200
windows dir: C:\windows
Hardware: 20344, LENOVO, INVALID
CPU: GenuineIntel Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz Intel586, level: 6
4 logical processors, active mask: 15
RAM: 4212088832 total
Crash Dump Analysis
Crash dump directory: C:\windows\Minidump
Crash dumps are enabled on your computer.
On Mon 8.12.2014 12:26:19 GMT your computer crashed
crash dump file: C:\windows\Minidump\120814-13828-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14F1A0)
Bugcheck code: 0x139 (0x2, 0xFFFFD0012EB1D5E0, 0xFFFFD0012EB1D538, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Mon 8.12.2014 12:26:19 GMT your computer crashed
crash dump file: C:\windows\memory.dmp
This was probably caused by the following module: netwbw02.sys (Netwbw02+0xD945)
Bugcheck code: 0x139 (0x2, 0xFFFFD0012EB1D5E0, 0xFFFFD0012EB1D538, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\drivers\netwbw02.sys
product: Intel® Wireless WiFi Link Adapter
company: Intel Corporation
description: Intel® Wireless WiFi Link Driver
Bug check description: The kernel has detected the corruption of a critical data structure.
A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: netwbw02.sys (Intel® Wireless WiFi Link Driver, Intel Corporation).
Google query: Intel Corporation KERNEL_SECURITY_CHECK_FAILURE
On Mon 8.12.2014 11:25:34 GMT your computer crashed
crash dump file: C:\windows\Minidump\120814-20953-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14F1A0)
Bugcheck code: 0x139 (0x2, 0xFFFFD001829955E0, 0xFFFFD00182995538, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Mon 8.12.2014 10:22:55 GMT your computer crashed
crash dump file: C:\windows\Minidump\120814-7203-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14F1A0)
Bugcheck code: 0x139 (0x2, 0xFFFFD00174FC5180, 0xFFFFD00174FC50D8, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Mon 8.12.2014 09:48:13 GMT your computer crashed
crash dump file: C:\windows\Minidump\120814-12515-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14F1A0)
Bugcheck code: 0x139 (0x2, 0xFFFFD000C3F70180, 0xFFFFD000C3F700D8, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Mon 8.12.2014 08:26:09 GMT your computer crashed
crash dump file: C:\windows\Minidump\120814-12703-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14F1A0)
Bugcheck code: 0x139 (0x2, 0xFFFFD000210D55E0, 0xFFFFD000210D5538, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Sat 6.12.2014 19:57:40 GMT your computer crashed
crash dump file: C:\windows\Minidump\120614-13812-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14F1A0)
Bugcheck code: 0x139 (0x2, 0xFFFFD00025F335E0, 0xFFFFD00025F33538, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Sat 6.12.2014 17:03:33 GMT your computer crashed
crash dump file: C:\windows\Minidump\120614-21828-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14F1A0)
Bugcheck code: 0x139 (0x2, 0xFFFFD001CA954180, 0xFFFFD001CA9540D8, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Sat 6.12.2014 16:58:13 GMT your computer crashed
crash dump file: C:\windows\Minidump\120614-17812-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14F1A0)
Bugcheck code: 0x139 (0x2, 0xFFFFD0002BFC5180, 0xFFFFD0002BFC50D8, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Sat 6.12.2014 14:38:37 GMT your computer crashed
crash dump file: C:\windows\Minidump\120614-14515-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14F1A0)
Bugcheck code: 0x139 (0x2, 0xFFFFD00023BD05E0, 0xFFFFD00023BD0538, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.I have this Yoga 2 13' for almost two months. A few days after my purchase, the computer suddenly gave a blue screen and restarted. Then this BSODs became more frequent. The strange thing is that, I was in France for almost a month, and no BSODs happened. Now that I am in Turkey for a few days, the PC started to give out kernel security check failures.
Any suggestions for the resolution of the problem. Cause it's quite annoying to wait for the PC to crush before doing anything?
Here are the details for dump files:
computer name: BAHADIR
windows version: Windows 8.1 , 6.2, build: 9200
windows dir: C:\windows
Hardware: 20344, LENOVO, INVALID
CPU: GenuineIntel Intel(R) Core(TM) i5-4210U CPU @ 1.70GHz Intel586, level: 6
4 logical processors, active mask: 15
RAM: 4212088832 total
Crash Dump Analysis
Crash dump directory: C:\windows\Minidump
Crash dumps are enabled on your computer.
On Mon 8.12.2014 12:26:19 GMT your computer crashed
crash dump file: C:\windows\Minidump\120814-13828-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14F1A0)
Bugcheck code: 0x139 (0x2, 0xFFFFD0012EB1D5E0, 0xFFFFD0012EB1D538, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Mon 8.12.2014 12:26:19 GMT your computer crashed
crash dump file: C:\windows\memory.dmp
This was probably caused by the following module: netwbw02.sys (Netwbw02+0xD945)
Bugcheck code: 0x139 (0x2, 0xFFFFD0012EB1D5E0, 0xFFFFD0012EB1D538, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\drivers\netwbw02.sys
product: Intel® Wireless WiFi Link Adapter
company: Intel Corporation
description: Intel® Wireless WiFi Link Driver
Bug check description: The kernel has detected the corruption of a critical data structure.
A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: netwbw02.sys (Intel® Wireless WiFi Link Driver, Intel Corporation).
Google query: Intel Corporation KERNEL_SECURITY_CHECK_FAILURE
On Mon 8.12.2014 11:25:34 GMT your computer crashed
crash dump file: C:\windows\Minidump\120814-20953-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14F1A0)
Bugcheck code: 0x139 (0x2, 0xFFFFD001829955E0, 0xFFFFD00182995538, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Mon 8.12.2014 10:22:55 GMT your computer crashed
crash dump file: C:\windows\Minidump\120814-7203-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14F1A0)
Bugcheck code: 0x139 (0x2, 0xFFFFD00174FC5180, 0xFFFFD00174FC50D8, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Mon 8.12.2014 09:48:13 GMT your computer crashed
crash dump file: C:\windows\Minidump\120814-12515-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14F1A0)
Bugcheck code: 0x139 (0x2, 0xFFFFD000C3F70180, 0xFFFFD000C3F700D8, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Mon 8.12.2014 08:26:09 GMT your computer crashed
crash dump file: C:\windows\Minidump\120814-12703-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14F1A0)
Bugcheck code: 0x139 (0x2, 0xFFFFD000210D55E0, 0xFFFFD000210D5538, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Sat 6.12.2014 19:57:40 GMT your computer crashed
crash dump file: C:\windows\Minidump\120614-13812-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14F1A0)
Bugcheck code: 0x139 (0x2, 0xFFFFD00025F335E0, 0xFFFFD00025F33538, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Sat 6.12.2014 17:03:33 GMT your computer crashed
crash dump file: C:\windows\Minidump\120614-21828-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14F1A0)
Bugcheck code: 0x139 (0x2, 0xFFFFD001CA954180, 0xFFFFD001CA9540D8, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Sat 6.12.2014 16:58:13 GMT your computer crashed
crash dump file: C:\windows\Minidump\120614-17812-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14F1A0)
Bugcheck code: 0x139 (0x2, 0xFFFFD0002BFC5180, 0xFFFFD0002BFC50D8, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
On Sat 6.12.2014 14:38:37 GMT your computer crashed
crash dump file: C:\windows\Minidump\120614-14515-01.dmp
This was probably caused by the following module: ntoskrnl.exe (nt+0x14F1A0)
Bugcheck code: 0x139 (0x2, 0xFFFFD00023BD05E0, 0xFFFFD00023BD0538, 0x0)
Error: KERNEL_SECURITY_CHECK_FAILURE
file path: C:\windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: The kernel has detected the corruption of a critical data structure.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time. -
How do I reconnect using SSL/TLS security in Dreamweaver using Windows 7?
I am using an old version of Dreamweaver on Windows 7. When I try to upload a file, I get a message saying that I need to reconnect using SSL/TLS security mechanisms. Is this a setting in Dreamweaver or Windows 7? Thanks for any help or suggestions.
It sounds like it is a requirement of the server, not Dreamweaver or Windows7
Dreamweaver, even older versions, can connect using both FTP and SFTP. But SSL/TLS are on the HTTP protocol, not FTP, so I don't understand why you would get such an error using DW file upload. -
I know there are loads of posts with same issue and most of them were related to proxy and connectivity .
This was case for me as well (few months back). Now the same error is back. But I've confirmed that FW ports and proxy are fine this time around.
server is configured on http port 80
ERROR
Sync failed: UssCommunicationError: WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid
according to the validation procedure.~~at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request). Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WSyncAction.WSyncAction.SyncWSUS
I've checked proxy server connectivity. I'm able browse following site from WSUS server
http://catalog.update.microsoft.com/v7/site/Home.aspx?sku=wsus&version=3.2.7600.226&protocol=1.8
I did telnet proxy server on the particular port (8080) and that is also fine.
I've doubt on certificates, any idea which are the certificates which we need to look? And if certificate is expired then (my guess) we won't be able open the above mentioned windows update catalog site?
Any tips appreciated !
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCMHi Lawrence ! - Many thanks for looking into this thread and replying. Appreciate your help.
Your reply ("SSL is enabled/configured, and the certificate being used is invalid
(or the cert does not exist or cannot be obtained), or the SSL connection could not be established.") is very helpful.
I've already tested CONTENT DOWNLOAD and it's working fine. WSUS Sync was also working fine for years with proxy server configured on port (8080) and WSUS server on port 80.
My Guess (this is my best guess ;)) is this something to do with Firewall or Proxy side configuration rather than WSUS. However, I'm not finding a way to prove this to proxy/firewall team. From their perspective all the required port communication open and
proxy server is also reachable. More over we're able to access internet (Microsoft Update Catalog site) over same port (8080).
Any other hints where I can prove them it's a sure shot problem from their side.
Thanks again !!
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM -
How do I run a security scan on my macbook pro?
How do I run a security scan on my macbook pro?
If you have only Mac OSX running you don't need to run any security scan.
If any major security risk exists Apple offers Security Updates.
Just don't install any applications not needed,
If you run Windows that is a different story. -
I have no experience with sharepoint at all. but this is what I observed.
I intermittently getting this error message on my sharepoint. could not establish trust relationship for the ssl/tls secure channel. Remote Certificate is invalid according to the validation procedure.
Screnshot of the error
This is how the sharepoint page layout.
I have report.aspx. and below is the content of the aspx file.
The url is http://sharepoint.COMPANY.com/Pages/Report.aspx.
The URL is intranet only.
The sharepoint is hosted in SERVER1 and the SSRS is hosted in SERVER.
I observed this error happens on both HTTP and HTTPS http sharepoint COMPANY com/Pages/Report.aspx OR https sharepoint COMPANY com/Pages/Report.aspx
So far, the step I did was to follow this blog http://krishnasangani.blogspot.ca/2013/06/the-remote-certificate-is-invalid.html Restarted
IIS in SERVER1 AND SERVER2. but the problem persist. Another I have done is to click the certificate in internet explorer and everything looks ok on that side to (certificate is valid)
It seems to only happen earlier during the morning, then it fixes itself around 9 Oclock. It has been on going for about 2 weeks. Please help troubleshooting this.
<%@ Page Inherits="Microsoft.SharePoint.Publishing.TemplateRedirectionPage,Microsoft.SharePoint.Publishing,Version=14.0.0.0,Culture=neutral,PublicKeyToken=71e9bsasdasdasd9c" %> <%@ Reference VirtualPath="~TemplatePageUrl" %> <%@ Reference VirtualPath="~masterurl/custom.master" %><%@ Register Tagprefix="SharePoint" Namespace="Microsoft.SharePoint.WebControls" Assembly="Microsoft.SharePoint, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bsasdasdasd9c" %>
<html xmlns:mso="urn:schemas-microsoft-com:office:office" xmlns:msdt="uuid:547SF010-65B3-11d1-A29F-00457845FFSW"><head>
<!--[if gte mso 9]><SharePoint:CTFieldRefs runat=server Prefix="mso:" FieldList="FileLeafRef,Comments,PublishingStartDate,PublishingExpirationDate,PublishingContactEmail,PublishingContactName,PublishingContactPicture,PublishingPageLayout,PublishingVariationGroupID,PublishingVariationRelationshipLinkFieldID,PublishingRollupImage,Audience,PublishingPageImage,PublishingPageContent,SummaryLinks,ArticleByLine,ArticleStartDate,PublishingImageCaption,HeaderStyleDefinitions"><xml>
<mso:CustomDocumentProperties>
<mso:PublishingContact msdt:dt="string">8</mso:PublishingContact>
<mso:HeaderStyleDefinitions msdt:dt="string"></mso:HeaderStyleDefinitions>
<mso:display_urn_x003a_schemas-microsoft-com_x003a_office_x003a_office_x0023_PublishingContact msdt:dt="string">First Last Name</mso:display_urn_x003a_schemas-microsoft-com_x003a_office_x003a_office_x0023_PublishingContact>
<mso:PublishingContactPicture msdt:dt="string"></mso:PublishingContactPicture>
<mso:PublishingContactName msdt:dt="string"></mso:PublishingContactName>
<mso:ContentTypeId msdt:dt="string">0x010100C568DB5SDH48375LKNSDFG8340JKRG8034U6NEGK8TNGE8U34NIOGE8355H3358TRNG38G43JIOEG0T3JIGE9034340R8J05T4I54T4J8903HH5640K9445G54HH6564H65665</mso:ContentTypeId>
<mso:Comments msdt:dt="string"></mso:Comments>
<mso:PublishingContactEmail msdt:dt="string"></mso:PublishingContactEmail>
<mso:PublishingPageLayout msdt:dt="string">https://sharepoint.COMPANY.com/_catalogs/masterpage/PageFromDocLayout.aspx, Body only</mso:PublishingPageLayout>
<mso:PublishingPageContent msdt:dt="string"><div class="ms-rtestate-read ms-rte-wpbox"><div class="ms-rtestate-notify ms-rtestate-read a74e0591-4ee6-4837-935a-3c932a967fac" id="div_a74e0591-4ee6-4837-935a-3c932a967fac"></div>
<div id="vid_a74e0591-4ee6-4837-935a-3c932a967fac" style="display:none"></div></div>
<div class="ms-rtestate-read ms-rte-wpbox"><div class="ms-rtestate-notify ms-rtestate-read e97fce7c-b702-4530-ae50-16ea77475fd5" id="div_e97fce7c-b702-4530-ae50-16ea77475fd5"></div>
<div id="vid_e97fce7c-b702-4530-ae50-16ea77475fd5" style="display:none"></div></div>
</mso:PublishingPageContent>
<mso:PublishingRollupImage msdt:dt="string"></mso:PublishingRollupImage>
<mso:RequiresRouting msdt:dt="string">False</mso:RequiresRouting>
</mso:CustomDocumentProperties>
</xml></SharePoint:CTFieldRefs><![endif]-->
<title>Report</title></head>
A few questions I have in mind is Any pointer to troubleshoot this problem AND By looking at the ASPX file, Would you be able to determine what method is my Sharepoint page calling the SSRS report , integrated mode, native mode? IEFrame? The reason I am asking
this is that maybe IF I google using the right terminology I can get to the similar problem and solution.
ThanksPlease let us know if you are using
SharePoint communicates to an external service via HTTPS
Please try perform following steps:
Fix is to setup a trust between SharePoint and the server requiring certificate validation.
In SharePoint Central Administration site, go to “Security” and then “Manage Trust”. Upload the certificates to SharePoint. The key is to get both the root and subordinate certificates on to SharePoint.
The steps to get the certificates from the remote server hosting the WCF service are as follows:
1. Browse from IE to the WCF service (e.g., https://remotehost/service.svc?wsdl)
2. Right click on the browser body and choose “Properties” and then “Certificates” and then “Certificate Path”.
This tells you the certificate chain that’s required by the other server in order to communicate with it properly. You can double-click on each level in the certificate chain to go to that particular certificate, then click on “Details” tab, “Copy to
File” to save the certificate with the default settings.
As an example, get both VeriSign & VeriSign Class 3 Extended Validation SSL CA.
reference : http://blogs.technet.com/b/sharepointdevelopersupport/archive/2013/06/13/could-not-establish-trust-relationship-for-ssl-tls-secure-channel.aspx
If my contribution helps you, please click Mark As Answer on that post and
Vote as Helpful
Thanks, ShankarSingh(MCP) -
Hi everyone,
A somewhat similar question has been asked before by others but none of the answers given has helped me.I am attempting a DPM 2012 installation, which is failing at the "deploying reports" stage.My analysis of logs seems to point me in the direction of an SSL
error, which does not make sense since the configuration files say SSL is disabled (or at least, should be).
Here are the symptoms:
1.I am able to browse http://FQDN/Reports_MSDPM2012 folder from internet explorer
2.I am also able to browse http://FQDN/ReportServer_MSDPM2012 from internet explorer
3.The information given in the logs and relevant config files is shown below:
<<RSREPORTSERVER.CONFIG>>
<ConnectionType>Default</ConnectionType>
<LogonUser></LogonUser>
<LogonDomain></LogonDomain>
<LogonCred></LogonCred>
<InstanceId>MSRS10_50.MSDPM2012</InstanceId>
<InstallationID>{d9b1c335-5842-4a81-9148-79184c38bf09}</InstallationID>
<Add Key="SecureConnectionLevel" Value="0"/>
<Add Key="CleanupCycleMinutes" Value="10"/>
<Add Key="MaxActiveReqForOneUser" Value="20"/>
<Add Key="DatabaseQueryTimeout" Value="120"/>
<Add Key="RunningRequestsScavengerCycle" Value="60"/>
<Add Key="RunningRequestsDbCycle" Value="60"/>
<Add Key="RunningRequestsAge" Value="30"/>
<Add Key="MaxScheduleWait" Value="5"/>
<Add Key="DisplayErrorLink" Value="true"/>
<Add Key="WebServiceUseFileShareStorage" Value="false"/>
<!-- <Add Key="ProcessTimeout" Value="150" /> -->
<!-- <Add Key="ProcessTimeoutGcExtension" Value="30" /> -->
<!-- <Add Key="WatsonFlags" Value="0x0430" /> full dump-->
<!-- <Add Key="WatsonFlags" Value="0x0428" /> minidump -->
<!-- <Add Key="WatsonFlags" Value="0x0002" /> no dump-->
<Add Key="WatsonFlags" Value="0x0428"/>
<Add Key="WatsonDumpOnExceptions"
4.The DPM log file still appears to be using SSL even though i used reporting services configuration to remove SSL bindings:
running.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException: exception ---> Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ReportDeploymentException:
exception ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Net.WebException: The underlying connection was closed: Could
not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException:
The remote certificate is invalid according to the validation procedure.
at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest,
Exception exception)
5:I do have an SCCM site on the default web site used by SMS clients but on different ports
I am stumped.Somebody please give some advice
Thank youHi
This is an old post but did you come right? -
I Have a mid 2011 iMac with windows 8.1 on it and constantly get system thread exception not handled and kernel security check failur
I Have a mid 2011 iMac with windows 8.1 on it and constantly get system thread exception not handled and kernel security check failur
-
How to do a security scan on my iPad
i would like to know how to do a security scan just incase I've downloaded a suspicious app or something. Does anyone know how
There is no virus or malware in the wild that can affect an iPad, unless it has
been jailbroken. If that is the case in your situation, Terms of Use for the forum prohibit
discussion of jailbroken devices. -
Hi
Had to un-install and then re-install MS SQL Server 2012 with SSRS.
After we re-installed we are able to get to the Web Services page but not the Report Server page and get the above error message. We need to use SSL and when we bind the cert in RS Configuration Manager it says it does this successfully on the WebServices
tab. We also do a similar exercise on the ReportServer page.
Any help warmly welcomed :D
ThanksHi Rich Whight,
According to your description, after you re-installed SQL Server 2012 with SSRS, you are able to access Web Service URL, but when you tried to access Report Manager URL, the error occurred: The underlying connection was closed. Could not establish trust
relationship for the SSL/TLS Secure channel.
The issue may be caused when the certificate isn't installed correctly in the trusted root for the local computer. To verify and install the certificate, Please refer to the steps blow:
In RsReportServer.config file(default location: C:\Program Files\Microsoft SQL Server\MSRS11.MSSQLSERVER\Reporting Services\ReportServer), change the “SecureConnectionLevel” element value from 0 to 3.
Add correct value to <UrlRoot> element.
Add the same value to the <ReportServerUrl> element as step2.
Go to Microsoft management Console, add the certificate which you use to access the report server under “Trusted Root Certification Authorities”.
For more information about SSL configuration and Managing Trusted Root Certificates, please refer to the following documents:
http://blogs.msdn.com/b/mariae/archive/2007/12/12/ssl-configuration-and-reporting-services.aspx
http://technet.microsoft.com/en-us/library/cc754841.aspx
If you have any more questions, please feel free to ask.
Best Regards,
Wendy Fu -
Kernell security check failure issue
Hi.
I installed a webcam with mic integrated (external device) to my lenovo T61 computer, running 8.1 windows. When trying to use the webcam, the kernel security check failure appears, crashes my computer and restarts it. What can I do?
ThanksHi,
Any update here?
For the error message about KERNEL_SECURITY_CHECK_FAILURE, here is an MSDN article for reference:
Bug Check 0x139 KERNEL_SECURITY_CHECK_FAILURE
This bug check indicates that the kernel has detected the corruption of a critical data structure.
For information about how to recover from this error, see
Resolving Blue Screen errors in Windows.
As ZigZag and Brandon Records mentioned, we need the dump file to offer a better suggestion.
Some more reference:
Use OneDrive (SkyDrive) to
upload collected files and post screen shot/picture. (Updated: 1/16/2012)
How to read the small memory dump file that is created by Windows if a crash occurs
Best regards
Michael Shao
TechNet Community Support
Maybe you are looking for
-
How to set up time machine so it can view old backup after renewal of user rights ?
I am newbie in the mac world but I am very happy to use the devices I have. I just both and setup time capsule and did firt initial backup with time machine into account I have setup on the TC. But after while I was not able to view my user folder, s
-
Connecting with mysql database
in order to place the component in the JFrame. we need to take the location (cooridinates values) of the component from the available mysql database. how to connect the database field values with our java program??? give me some suggestion pls.....
-
Hughes net vs Wildblue which is better.
I am considering Satellite internet service. I live in a rural location where this is the only thing other than dial-up. Which is better Hughes net or Wildblue? Second, I need to be able to monitor my dog (live) from a remote location. What camer
-
Hi Gurus while raising bill to customers we enter tax code 4 service tax n it gets calculated automatically on the whole amt. Now when we receive partial payment how will service tax be calculated proportionately on the amt recd? Same query in case o
-
Font book keeps enabling ALL of my fonts - Overloading my system
When I restart my computer or just Font Book, Font Book enables ALL of my fonts. I have over 1100 fonts. It eats up all of my RAM (3GB) and the computer grinds to a slow crawl. I have deselected "automatic font activation" in preferences. I have crea