RV220W Critical error

I was trying to adjust some parameters on the administrative interface on the Rv220w when I got the message 'A critical error encountered while loading web page'.  At this point the admin web page was 'locked', and I had to close the page and log back in again.  I was trying to adjust the remote logging parameters when this happened.  I checked in the logs, but there was no information about this problem. 
I there something that I should do to avoid this problem?

tekliu wrote:This is a known iss and a workaround is provided in the firmware release note. A critical error is encountered when attempting to configure settings for remote logging to a syslog server.Work Around: Enable email logging on the Administration > Logging >Remote Logging Configuration page.
Hmmm, I would indeed hardly call this a workaround, To keep the mails readable most people would probably need to send a mail every half hour, which would fill up a mailbox quite easily...
When will a fix for this be ready?

Similar Messages

  • A critical error has occured. Processing of the service had to be terminate

    When manager wants to approve the employee leave request its giving following error.
    Critical Error
    A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
    Please contact your system administrator.
    Critical Error
    A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
    Please contact your system administrator.
      Access via NULL object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE   
      Access via NULL object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE:com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Access via NULL object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE
         at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
         at com.sap.xss.hr.lea.form.FcForm.getCustomizing(FcForm.java:1020)
         at com.sap.xss.hr.lea.form.FcForm.onInit(FcForm.java:417)
         at com.sap.xss.hr.lea.form.wdp.InternalFcForm.onInit(InternalFcForm.java:2053)
         at com.sap.xss.hr.lea.form.FcFormInterface.onInit(FcFormInterface.java:184)
         at com.sap.xss.hr.lea.form.wdp.InternalFcFormInterface.onInit(InternalFcFormInterface.java:1911)
         at com.sap.xss.hr.lea.form.wdp.InternalFcFormInterface$External.onInit(InternalFcFormInterface.java:2007)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1084)
         at com.sap.xss.hr.lea.worklist.VcWorkList.onInit(VcWorkList.java:267)
         at com.sap.xss.hr.lea.worklist.wdp.InternalVcWorkList.onInit(InternalVcWorkList.java:363)
         at com.sap.xss.hr.lea.worklist.VcWorkListInterface.onInit(VcWorkListInterface.java:164)
         at com.sap.xss.hr.lea.worklist.wdp.InternalVcWorkListInterface.onInit(InternalVcWorkListInterface.java:144)
         at com.sap.xss.hr.lea.worklist.wdp.InternalVcWorkListInterface$External.onInit(InternalVcWorkListInterface.java:220)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
         at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:713)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:666)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(AccessController.java:219)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
    Caused by: com.sap.aii.proxy.framework.core.BaseProxyException: Access via 'NULL' object reference not possible., error key: RFC_ERROR_SYSTEM_FAILURE
         at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
         at com.sap.xss.hr.lea.model.LeaveRequestAdaptiveModel.pt_Arq_Customizing_Get(LeaveRequestAdaptiveModel.java:392)
         at com.sap.xss.hr.lea.model.Pt_Arq_Customizing_Get_Input.doExecute(Pt_Arq_Customizing_Get_Input.java:137)
         at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
         ... 47 more
       kindly help ASAP,

    Hi,
    Did you give enough authorizations to the user at the beack end.
    Just Try giving SAP_ALL authorizations and check.
    Regards,
    Santhosh

  • Safe mode did not start successfully. This page has encountered a critical error. Contact your system administrator if this problem persists.

    Hi
    I just now updated dec 2013 c.u to sharepoint server 2010 sp2
     I get this error in event viewer when I browse  web applications  , they not open even
    Load control template file /_controltemplates/TaxonomyPicker.ascx failed: Could not load type 'Microsoft.SharePoint.Portal.WebControls.TaxonomyPicker' from assembly 'Microsoft.SharePoint.Portal, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'.
    SharePoint Web Services Round Robin Service Load Balancer Event: EndpointFailure
    Process Name: OWSTIMER
    Process ID: 3836
    AppDomain Name: DefaultDomain
    AppDomain ID: 1
    Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:548f72e6a39f401e95e92711aea13c45#authority=urn:uuid:9aebe976322541d280e4bd3799fa283f&authority=https://spfwf01:32844/Topology/topology.svc
    Active Endpoints: 2
    Failed Endpoints:1
    Safe mode did not start successfully. This page has encountered a critical error. Contact your system administrator if this problem persists.
    adil

    This messge I get initially I get two times (1)
    SharePoint Web Services Round Robin Service Load Balancer Event: EndpointFailure
    Process Name: w3wp
    Process ID: 4600
    AppDomain Name: /LM/W3SVC/2141356646/ROOT-1-130405218187772398
    AppDomain ID: 2
    Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:548f72e6a39f401e95e92711aea13c45#authority=urn:uuid:9aebe976322541d280e4bd3799fa283f&authority=https://spfwf01:32844/Topology/topology.svc
    Active Endpoints: 2
    Failed Endpoints:1
    Affected Endpoint: http://spfapp02:32843/548f72e6a39f401e95e92711aea13c45/MetadataWebService.svc
    aftert this message three times  (2)
    The Managed Metadata Service 'Managed Metadata Service' is inaccessible.
    and after (3)
    The health service has removed some items from the send queue for management group "MOJOmanagement" since it exceeded the maximum allowed size of 15 megabytes.
    after (4)
    Safe mode did not start successfully. This page has encountered a critical error. Contact your system administrator if this problem persists.
    and this time   I seen I am unable to browse web applications
    and
    Load control template file /_controltemplates/TaxonomyPicker.ascx failed: Could not load type 'Microsoft.SharePoint.Portal.WebControls.TaxonomyPicker' from assembly 'Microsoft.SharePoint.Portal, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'.
    adil

  • This page has encountered a critical error. Contact your system administrator if this problem persists.

    I am getting this error while opening SharePoint site pages. I am getting this error if i edit Web.config file. If i Restore the old version of Web.Config i am getting this error.. Please help me

    Hi UjwalaIDC,
    Also can try enabling the stack trace (and ULS) for more information to solve issue.
    http://blogs.msdn.com/b/souravd/archive/2009/06/23/sharepoint-2007-moss-2007-enable-stack-trace-for-better-logging-information.aspx
    http://www.sharepointdiary.com/2012/01/fix-for-this-page-has-encountered-critical-error.html
    Thanks
    Daniel Yang
    TechNet Community Support

  • Web Part Error: This page has encountered a critical error. Contact your system administrator if this problem persists

    Hi there,
    I am getting the following error in SharePoint 2007 site.
    Web Part Error: This page has encountered a critical error. Contact your system administrator if this problem persists.
    Show Error Details
    Hide Error Details
    [WebPartPageUserException: This page has encountered a critical error. Contact your system administrator if this problem persists.]
      at Microsoft.SharePoint.ApplicationRuntime.SafeControls.RethrowExceptionIfNeeded()
      at Microsoft.SharePoint.ApplicationRuntime.SafeControls.GetTypeFromGuid(Guid guid)
      at Microsoft.SharePoint.WebPartPages.SPWebPartManager.CreateWebPartsFromRowSetData(Boolean onlyInitializeClosedWebParts)
    There is no event logged related to this error. I have checked ULS log and nothing much I can find over there.
    Any help would be highly appreciated.
    Thanks,
    Puli
    Puli Bala

    It is not only because of unsafe controls. Please refer the articles below.
    http://www.dotnetmafia.com/blogs/dotnettipoftheday/archive/2008/09/24/safe-mode-did-not-start-successfully-request-failed.aspx
    http://blogs.edwardwilde.com/2009/12/22/safe-mode-did-not-start-successfully-could-not-load-file-or-assembly/
    https://social.technet.microsoft.com/Forums/sharepoint/en-US/6d81f7b0-33c5-482b-b7aa-9f639c784dea/what-reason-can-cause-the-errorerror-failure-in-loading-assembly-microsoftsharepoint?forum=sharepointadminlegacy
    https://paulsiu.wordpress.com/2008/07/24/sharepoint-loading-assembly-error-in-the-event-log/
    Puli Bala

  • How Do I Repair My MacBook Pro 15 Inch after critical error partitioning the hardrive?

    Hey guys I have just recently turned into a MAC OS X 10.6 user and i needed to have windows on my New MacBook Pro 15", I used the BootCamp Installer within the utilities section of applications and it partitioned my hardrive it then told me the partition needed to be formatted in NTSF format and shutdown, now when i power it up i get the black screen of death and the white stroke in the top left of the screen where the macbook is looking for windows files which are not there as it did not install them thanks to the format being incorrect, is there a way to go back to the original mac section of my hardrive using keyboard shortcuts? Also if i did not recieve a install disc with my macbook should i just take it back to the shop and have a genius look at it?

    First of all. don't listen to 'The hatter' - he is being no help here.
    There is no critical error.
    Also, you don't really need a backup.
    To boot into Mac OS X hold down 'alt' whilst pressing the power button and keep pressing alt until a menu pops up, choose Macintosh HD and then it will boot Mac OS X.
    Make sure your Windows install disk is in the drive when rebooting.

  • The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error.

    got event ID 4015 and source DNS-Server-Service. please suggest how to fix this issue
    The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error.
    Raj

    Hi
     first run "ipconfig /flushdns" and then "ipconfig /registerdns" finally restart dns service and check the situation,also you can check dns logs computer management ->Event viewer->Custom Views->Server roles->DNS.

  • In ESS-Leave Request -A critical error has occured.

    In ESS when tried to enter the Leave which is under Leave request the below error occured:
    Critical Error
    A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
    Please contact your system administrator.
    CREATE OBJECT: The class  was not found., error key: RFC_ERROR_SYSTEM_FAILURE  
    com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: CREATE OBJECT: The class  was not found., error key: RFC_ERROR_SYSTEM_FAILURE
         at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
         at com.sap.xss.hr.lea.blockcale.FcBlockCale.getBcData(FcBlockCale.java:232)
         at com.sap.xss.hr.lea.blockcale.wdp.InternalFcBlockCale.getBcData(InternalFcBlockCale.java:250)
         at com.sap.xss.hr.lea.blockcale.FcBlockCaleInterface.getBcData(FcBlockCaleInterface.java:135)
         at com.sap.xss.hr.lea.blockcale.wdp.InternalFcBlockCaleInterface.getBcData(InternalFcBlockCaleInterface.java:224)
         at com.sap.xss.hr.lea.blockcale.wdp.InternalFcBlockCaleInterface$External.getBcData(InternalFcBlockCaleInterface.java:276)
         at com.sap.xss.hr.lea.blockcale.VcBlockCale.onInit(VcBlockCale.java:261)
         at com.sap.xss.hr.lea.blockcale.wdp.InternalVcBlockCale.onInit(InternalVcBlockCale.java:275)
         at com.sap.xss.hr.lea.blockcale.VcBlockCaleInterface.onInit(VcBlockCaleInterface.java:163)
         at com.sap.xss.hr.lea.blockcale.wdp.InternalVcBlockCaleInterface.onInit(InternalVcBlockCaleInterface.java:144)
         at com.sap.xss.hr.lea.blockcale.wdp.InternalVcBlockCaleInterface$External.onInit(InternalVcBlockCaleInterface.java:220)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
         at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
         at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
         at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
         at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
         at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:756)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:291)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:733)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:668)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:150)
         at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:860)
         at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:220)
         at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1246)
         at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:354)
         at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:547)
         at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:591)
         at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:822)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:321)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:684)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:250)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:150)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(AccessController.java:219)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Caused by: com.sap.aii.proxy.framework.core.BaseProxyException: CREATE OBJECT: The class  was not found., error key: RFC_ERROR_SYSTEM_FAILURE
         at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
         at com.sap.xss.hr.lea.model.LeaveRequestAdaptiveModel.pt_Arq_Eecale_Get(LeaveRequestAdaptiveModel.java:434)
         at com.sap.xss.hr.lea.model.Pt_Arq_Eecale_Get_Input.doExecute(Pt_Arq_Eecale_Get_Input.java:137)
         at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
         ... 60 more

    I found out the solution and solved this issue.
    Deleted the leave request which was created with error i.e: from the custom table zxx_vacr noted down the id initiater ( which had error) and in the Test Environment for Leave request (PTARQ) gave the PERNR and deleted the documents ( gave the id iniater in the document status ).
    To check the error work flow go to SWIA and check for that Workflow (Leave) raised by the PERNR at that duration ( check in IT2001 for the duration) and give it here.
    After deleting it check in the portal for the leave request.

  • A critical error has occured. Processing of the service was terminated. Unsaved data has been lost.

    Dear Team,
    I am facing one issue in ESS, in that only one service(Employee Search) showing critical error.
    Please check attachment once
    Thanks,
    Srinivas

    Hi Srivas,
    And also ask your portal consultant to check the RFC destinations was created or not and also check the ping test for RFC.
    Regards,
    Anil

  • A Critical error encountered while loading webpage.

    Was running 2.1.51  and when browsing to the status link while logged in to the web gui I got a blank web page with the following text:
    A Critical error encountered while loading webpage.
    Reboot router - log back in - can go anywhere except the status page -- get same error page
    made the mistake of downloading and upgrading firmware to 2.1.71   = upgrade completed successfully = presented with the new login screen confirming that the box is running the new code -- now when I log in - I don't get in rather the previous error page - and cant get anywhere.
    A Critical error encountered while loading webpage.
    the url is https://192.168.75.1/scgi-bin/platform.cgi   but it doesn't load only displays the error.
    could someone share another valid management url for the box so I can at least try to get in somewhere before attempting to factory reset this POS ;-(
    thanks.

    Thanks for the response.   Based on the number of crickets that I heard after asking the question, I did indeed factory reset the box.  Luckily I had a backup of the config so it wasn't too painful to restore.
    I beleive the root cause co-incided with the expiration of the trend micro web protection gateway service.
    For whatever reason, I did not receive any notification that the service was to expire but the error experienced was noticed just two days after the subscription expired...  I had successfully logged in without issue and was able to view the status tab only a week earlier.
    be sure to pay the cisco tax on time or they'll lock you out of your box was the lesson learned...

  • Critical Error while upgrading workbook

    Dear All,
    I receive a critical error while I open a workbook in Bex 7.0 analyzer.
    After I see the dialog - "Workbook open for upgrade", I received this error.
    It says check the trace and I don't have a clue how to check the trace.
    Can somebody help me?
    Thanks,
    Praveen.

    Hi Arun,
    Thanks for your reply.
    Yes my GUI is latest with all 710 latest patches for:
    1. SAP GUI Patch 13
    2. BW 7.0 Add-on Patch 901
    3. BW 3.5 Add-on Patch 6
    Thanks and regards,
      Pratik

  • Critical error while approving leave

    Hi
    In portal while approving leave i am getting the follwoing error .
    Critical Error
    A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.
    Please contact your system administrator.
       The running application consciously caused an abort with short dump., error key: RFC_ERROR_SYSTEM_FAILURE   
    This error is comming only for few employees not for every one.
    Can anybody please let me know the solution for this .
    Thanks and Regards.

    Hi,
    First of all, check the short dump in transaction ST22, you probably find there much more details of the problem.
    secondly, make sure that these users have enough authorisations (do a trace) in backend. They might be missing some RFC call related authoritsation.
    Regards,
    Karri

  • Critical error while opening the personal data in portal

    Dear friends
    In the portal after  clicking on the  personal data tab i am getting the following error .
    A critical error has occured processing of the service has to be terminated .Unsaved data has been lost.
    Please contact your system administrator .
    Screen output without connection to user., error key :RFC_ERROR_SYSTEM_FAILURE.
    Here please note that when i am accessing the same personal data tab in the development it is working fine but this problem is with production only.
    Can anybody please let me know the solution for this error.
    Best Regards.

    Dear krishna,
    Hope you are doing good.
    As suggested, there is a backend dump generated; you need to heck it and fix in the backend. /nst22 , /nstad and /n sm21 will give you more info.
    Also do double check all the JCo's for ESS.
    Thank you and have a nice day :).
    Kind Regards,
    Hemanth
    SAP AGS

  • Critical error, blue screen stop error

    after installing installation CD today, my laptop keeps going to a blue screen reporting a STOP error.... a critical error, but can't reslove. Have now removed the iTunes and it hasn't happened yet.
    Maybe a conflict, I don't know.
    Dell Inspirion Laptop   Windows XP  

    I found the answer !  Turns out it is/was not a Win7 problem, but a drive problem.
    I was following some links on another Win7 forum and happened upon mention of SSD drives causing a BSOD.  The one in particular mentioned was a Crucial M4 SSD. It sounded familiar . . . I have one as my C: drive.  Turns out I needed a firmware
    update. The update corrects a condition where an incorrect response to a SMART power-on counter will cause the m4 drive to become unresponsive after 5184 hours of Power-on time. The drive will recover after a power cycle, however, this failure will repeat
    once per hour after reaching this point. 5184 hours is about 7.2 months. Just a bit under how long I've had this system.
    I applied the update . . . . . computer has been running seven hours now.
    Thanks to all who helped me here.
    Joe
    Wanted to add for reference:
    The original post from Crucial acknowledging the issue.
    BSOD Crucial M4
    The fix is as simple as updating the firmware, but the hoops to jump through for the firmware update to take place is a bit frustrating.
    With my board, z68-v pro, it was necessary for me to go into the bios and change my controller mode to IDE. In addition I needed to remove the drive connected to the Marvell port and plug it into the Intel port as well as put my two ssd's on the first and
    second Intel ports. Once this was done I was able to get past the 'finding drives' screen and update the firmware for both ssd's. Once the update finished I went back into the bios and changed the controller mode back to AHCI. As i said, a frustrating experience
    but I commend Crucial for owning up to the issue rather than lead people to think their ssd's needed replacing or something was wrong with windows and subsequent unnecessary re-installs.

  • Critical Error in the Enterprise Server

    I am having a critical error in my process in the Enterprise Server.. It works fine inside Studio.. The following is the error:-
    Error while persisting the transaction data: 'An error occurred while accesing the database. Detail:SQL statement: 'unknown' ' Details: An error occurred while accesing the database. Detail:SQL statement: 'unknown' Caused by: Unexpected exception while enlisting XAConnection java.sql.SQLException: Transaction rolled back: Transaction timed out after 32 seconds BEA1-058A537B20F95C8E0272 at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1418) at weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1330) at weblogic.jdbc.wrapper.JTAConnection.getXAConn(JTAConnection.java:189) at weblogic.jdbc.wrapper.JTAConnection.checkConnection(JTAConnection.java:64) at weblogic.jdbc.wrapper.Connection.preInvocationHandler(Connection.java:92)
    It also complains the following :-
    Process '/TestProcess#Default-1.0@Test' was not found in the Directory Service: 'oracle'
    Detail:Verify that the Directory Service is working properly and that the process is correctly deployed.
    Consider that Oracle J2EE Engines require referral configuration to communicate.
    But the process has been completely deployed..
    What could be the possible problem?
    Any answer anybody?
    This is urgent..

    It seems that some execution is taking longer than 30 seconds (default JTA timeout)
    You should increase the WLS JTA Timeout.
    Hope this helps,
    Ariel

Maybe you are looking for

  • Macbook pro 15-inch, Mid 2010 crashing very bad after mavericks update

    Hello Community, I updated my 15-inch, Mid 2010 macbook pro from snow leopard to mavericks with the gratis update that appeared one day in march i believe. Since then its been crashing sporadically with the simplest of actions like creating a new fol

  • Pressing F1 does not expand the TOC in MS HTML Help

    I'm using version 6 of RoboHelp. When my users click F1 in my software application, I want the TOC to expand on the left-hand side of the Microsoft HTML Help window so they can see the page that is displayed to them. I've checked the "Always Show Sel

  • HT5621 my apple id  said  to be disbled, how can i make it  enabled?

    when i  updated my new applications on my i phone 5s, it said  my apple id is disabled,  how can i  change disabled  to enabled position. i want my applications  updated.

  • Battery overheating

    Hi everybody! I don't know if it happen to somebody else, but since a couple of days by battery started to be the reason of my MBP overheating... well, until a week ago my laptop was always between 49 and 54 degrees, but since a couple of days it goe

  • Help!  I lost all the places data in iPhoto.

    I tried a restore from time capsule , but it didn't help. All my pics show the same place on the map. Yesterday everything was fine. I was trying to assign the same location to a group of pics today, and somehow I assigned it to the whole library!  E