Safari 4.0.3 update will not install

On my PPC G5 2.1 Ghz I tried to install and receive message: The update "Safari" can't be saved. A networking error has occurred: Cannot open file (-3001). make sure you can connect to the internet and try again. I use a Verizon Fios router that uses wireless to a macbook. This is the first problem I have experience with any updates. At this point I cannot connect to itunes store with current version of safari. Help!

Hi there!
Yes, same problem too; I've already sent an email to apple support and just received a very vague and unpractical response with "call apple support in your country" as main advice. I've obviously emailed back stating that I need a clearer response and I don not have any intention to spend money calling for support when updates is a free tool. I do also believe this is a probem generated on Apple's end, I just wish they learned to say "sorry, it's us;  working on it!"
Message was edited by: MacLuc

Similar Messages

  • Runing windows 7, iTunes update will not install auto or manually.  Have deleted old backup.

    Runing windows 7, iTunes update will not install auto or manually.  Have deleted old backupand tried reinstalling iTunes.  Ideals?

    I have the same issues. Any one out there with any good thoughts here.

  • The iTunes update will not install either manually or automatically.  I have Windows XP

    The iTunes update will not install either manually or automatically.  I have Windows XP pro

    Follow the directions of tt2 in https://discussions.apple.com/thread/5822086 to get the install to work.

  • Camera Raw 5.7 Update will not install

    I have a MacBook Air with Bridge 4. The Camera Raw 5.7 Update will not install. I've tried it both through Help/Updates and Software Update. Any ideas?

    The Camera Raw 5.7 Update will not install. I've tried it both through Help/Updates and Software Update. Any ideas?
    You can also install it manually.
    Be sure to have the latest download, then open the DMG file (should do so automatic) and grab the plug in file to drag it in the correct place.
    This is the path:
    Library (That is on root level, not your user account library!) / Application Support/ Adobe? Plug-ins / CS4 / File Formats.
    In this folder should only be one version present and it is called "Camera Raw.plugin" Under info it should say version 5.7.

  • HT5242 I keep getting an error, and the Java Update will not install. What can I do?

    I keep getting an error, and the Java Update will not install. What can I do?

    Never mind. I kept trying, and finally when I opened "About This Mac" and clicked the software update from there (as opposed to the "Software Update" just below), the Java update finally worked.

  • OSX software updates will not install

    Softward updates will not install on my MacBook Air (OSX 10.7.4).  The updates download, but then during the installation process a message pops up saying that an error occurred and that nothing was installed.  I've tried it 5 times with the same result each time. 
    Any suggestions (for a non-technical person)?

    Hello, macrmj. 
    Thank you for visiting Apple Support Communities.
    Here are a couple troubleshooting articles I would recommend going through that may help resolve this issue.
    Using Disk Utility to verify or repair disks
    http://support.apple.com/kb/ht1782
    About Disk Utility's Repair Disk Permissions feature
    http://support.apple.com/kb/ht1452
    Cheers,
    Jason H.

  • Updates will not install using App Store on 10.7.5

    Updates will not install using the App Store.  I am using a MacBook Pro on 10.7.5.  When I click the button labeled "update" in App Store, the little wheel in the upper left-hand corner continues to spin forever (I waited 12 hours one time) but nothing happens.  No updates will install.  My Macbook Pro has always operated without issues since I bought it new in 2009, and I have a reliable, fast internet connection.

    Let's try a test here.
    Make a new User Account, and try to update from there.
    OS X Mountain Lion: Create a new user account
              http://support.apple.com/kb/PH11468

  • HT5654 Latest update will not install on my iPad

    Latest update will not install on my iPad

    That is unfortunate.
    If help is actually desired, provide some details of the issue such as any errors that are occurring.
    We are not mind readers.

  • Updates will not install error 1

    updates will not install error 1

    Error Code 1: "Failed to install" | Creative Cloud Desktop : https://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html

  • After upgrading to 3.6.8 none of the plugins load even though there are updates available. The updates will not install and even though the error states to look at the console error log there are no errors listed in the log.

    After upgrading to 3.6.8 none of the extensions load even though there are updates available. The updates will not install and even though the error states to look at the console error log there are no errors listed in the log. All extensions are listed in Addons>Extensions.
    == This happened ==
    Every time Firefox opened
    == Upgrading to newer Firefox version (3.6.8)

    I have been having the same issue for the last two weeks. No real indication as to why it ever began other than I had turned off my router and Airport Extreme Base Station off for a weekend while I was away from my place.
    iPad, iPhone, iPod Touch, all have no issues at all with my Airport Extreme Base Station. Can stay connected throughout my living room, bathroom, bedroom, no issues whatsoever.
    My 5 month old MacBook Pro 2.66 GHz Core i7 Airport is sometimes perfect, able to connect, DHCP, and browse without issue. Then, for no reason, I won't be able to join my wireless network, or when I can join, I can't pick up an IP address. And then it will connect, pick up and IP, and then it won't browse. No real rhyme or reason to when this will happen, or when it works.
    I thought that it was an issue with my MacBook Pro, but then my sister visited with her brand new MacBook Pro 2.26 Intel Core 2 Duo, and while a month ago she was able to connect, DHCP, and browse without issue, this weekend she had all of the same issues I was having.
    My XBOX 360 and MacBook Pro have absolutely no issues with the wired connection. Only my WAN seems to have this issue.
    Did you ever find anything more to this?

  • Firefox's newest update will not install; STOP SENDING THIS UPDATE!!!

    Your Firefox support has been downloading the newest update to my desktop business PC. Your update will not install on our PC.
    John Schultz

    Try doing a disk repair or run OnyX and clear your caches.
    OnyX for Mac
    http://www.macupdate.com/app/mac/11582/onyx
    http://helpdesk.hsc.unt.edu/wp-content/uploads/2010/02/Mac-OS-X-10.6-run-OnyX.pd f

  • HT4623 my IOS7 update will not install.  It is telling me it is unavailable.

    my IOS7 update will not install.  It is telling me it is unavailable after it tries to install.

    Too many people trying across ITunes now.  Backup device, then disconnect it back update directly from the device.  I have complete two iPhones and two iPads.  Plan on about 15-30 minutes depending on your download speed.
    Good luck!

  • 2014-005 Security Update will not install

    2014-005 Security Update will not install "encountered unexpected error" message at end of install routine

    Thanks for the quick response.
    I had already done that when it didn't load install completely from the app store notice.  It goes all the way to the final part of the installation including moving things in place etc, but a the very last moment it says "Installation failure - An unexpected error has occurred. Contact your software vendor."
    I've never had any kind of situation like this with any installs, updates, or anything.  Everything else is completely up to date.  Steve.

  • I tunes update will not install latest version on my laptop

    Itunes update will not install latest version on my laptop?!  Pops up as an error has occured whilst trying to install!

    Hello ellieb7,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Best of luck,
    Mario

  • Update will not install

    Hi,
    My computer had to be put into storage. As I expected, when I took it out there was a few updates. Most loaded without a problem but the new update for Leopard will not install.
    The blue line only goes a small way then stops. I left my computer on all night thinking it just needed time but it still didn't go past where it stopped.
    I can't access iTunes until this update updates.
    What do I need to do?
    Thanks,
    D

    Some general advice on updating:
    It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
    So before you do anything else:
    If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
    Turn off sleep mode for both screen and hard disk.
    Disconnect all peripherals except your keyboard and mouse.
    1. Repair Permissions (in Disk Utility)
    2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
    At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
    3. Download the correct version of the COMBO update from the Apple download site.
    The Combo updater of Leopard 10.5.8 can be found here:
    http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
    If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
    Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
    More information on using Software Updater here:
    http://support.apple.com/kb/TA24901?viewlocale=en_US
    Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
    Now proceed as follows:
    4. Close all applications.
    5. Unplug all peripherals except your keyboard and mouse.
    6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
    7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
    8. Once your Mac is awake, repair permissions again, and you should be good to go!
    If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
    9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 4.
    N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
    Lastly, Apple's own article on the subject of Software Update may also be useful reading:
    http://docs.info.apple.com/article.html?artnum=106695
    If you are updating Safari (or just have):
    Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
    So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
    Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
    Additional tips on software installation here:
    http://docs.info.apple.com/article.html?artnum=106692
    To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
    Again, the advice is to remove all Input Managers from the following directories:
    • /Library/InputManagers
    • ~/Library/InputManagers
    especially prior to system updates (they can always be added back one-by-one later).

Maybe you are looking for

  • How to create a space on the volume for user in eDirectory ?

    hello, can I create and associate a limit on the volume of data with a Java API ?. I would like to do at the time that the user is created in eDirectory. What would my options?. I need to create a space on the volume and create a folder with the user

  • Can't display PDF file larger than 2Mb

    Would like to ask if someone knows that any setting that would allow the PDF file larger than 2Mb be displayed within web browser IE 7, for some strange reasons, the PDF file will stop download at arround 800 some Kb, and I waited for almost 15 minut

  • Include a dialog screen in tabstrip of selection-screen

    Hi All, Could anyone please tell me how to include a dialog screen into selection-screen? We have a normal selection screen for a report but now we need to add some more function and this requires to key in material number in first column and quantit

  • Programmatically change screen orientation and/or resolution using VBA?

    We don't have VB.NET available and I was wondering if it is possible to create VBA code that would change: 1) screen orientation (and maybe resolution) 2) on a specific monitor (in a multiple monitor setup; we have two)  The idea would be to put it i

  • Declare @p1 variable error when creating multiple search form to show database info

    Hi, all help is incredibly appreciated, i have been trying to make a multiple filtered search form for a database in asp / vbscript. I want to be able to select from THIS database table, all info on the rows which id is BETWEEN x and x AND date is BE