Safari not working with new airport express

i just hooked up my airport express and safari does not seem to be working on 2 iPhone 4Gs and on 1 macbook pro.
seems fine on 1 original iPad and 1 hardwired iMac.
any suggestions?

Where did you get the firmware, and what specifically was it for? You need to know this before downloading or installing anything.
Mulder

Similar Messages

Slingbox Solo no longer working with new Airport Express router

Help! I'm at the end of my tether trying to get my Slingbox to communicate with the new Airport Express I've just bought. Here's the deal...Obviously, as AEXP only has one Ethernet Port (under advisement) I had to go and buy a 5 port Ethernet switch. Cable modem connects to 1 port of the switch. AEXP connects to another port. Slingbox connects to 3rd port. Network light on Slingbox flashes incessantly and Slingplayer software tells me to makes sure the "Network Router the Slingbox is connected to has the correct Port Forwarding settings."
I have tried (via google) but cannot make sense of this. There should be no firewall obstacles as i am using MAC filtering and have added the MAC address of the slingbox to the AEXP settings. I know that Slingbox does work as it worked fine before with my Belkin router. Please can anyone help? I have called slingbox for ages and they are unable to help. Here's hoping someone here has brains and the patience i don't have! Kind Regards.

identitytheft, Welcome to the discussion area!
Sorry but you need to replace the Ethernet switch with a router which has more than one Ethernet port.
Since the AirPort Express (AX) only has a single Ethernet port it can not properly share an IP address to Ethernet clients.

New Air Port Time Capsule Not Working With Old Airport Express

I have been running a home network comprised of a Air Port Time Capsule (A1254) and 5 ea Air Port Express (A1264) for several years with no problem.
The Air Port Time Capsule (A1254) died and I replaced it with an Air Port Time (A1470). Now none of the Air Port Express (A1264) work, all flashing yellow. All other network functions seem to work okay, Time Capsule Backup, Apple TV, Internet …
I am using AirPortUtility 6.3.1 for setup but do not see any way to setup the Air Port Express.

Reset the Express to factory and start over.. they should work.. are you using all 5 in extend wireless mode?
When you reset the Express click on the wifi icon in the top menu area.. and the newly reset AEx will appear in the list.. click it and Airport utility will open and attempt to automagically connect it to the TC.

Safari not working with new firmware

Safari doesn't seem to be working now that I installed new firmware on Macbook Pro

Where did you get the firmware, and what specifically was it for? You need to know this before downloading or installing anything.
Mulder

I am unable to join my existing wireless network with new AirPort Express

I am unable to join my existing wireless network with new AirPort Express.
I am using a DLink DI-524 Router, Windows 7 (64), and the AirPort Express.
AirPort Utility will not recognize the AEX wirelessly, it will only recognize it when it is connected by Ethernet. I can then configure the AEX and verify that the settings stick once disconnected and then reconnected. However, even after that, it will not recognize the AEX once disconnected from the Ethernet cable.
I followed the suggestions of several other threads on these forums. But I am unable to get the AEX to work.
Any suggestions? Thanks in advance.

Welcome to the discussion area!
It's almost always a security setting that causes problems when the Airport Express (AX) tries to join a third party wireless network. The AX usually does not "join" correctly and that's why you can't see it on your wireless network using AirPort Utility.
Using an ethernet cable is still the more reliable way to configure and adjust the AX, but if you are want to try to configure it using wireless, you must return the AX back to factory defaults as follows:
Power down the AX
Hold in the reset button +and keep holding it in+ as you plug the AX back in to power
Release the reset button after 10 seconds
When it is set to factory defaults, the AX broadcasts a wireless signal with a network name like "apple network xxxxxx" where the "x's" are either letters or numbers. You must look for this network by clicking on the fan shaped Airport icon at the top of the screen. If you don't see this network, then click Join Other Network to search that way. Unless you connect to this network, you will not be able to configure the AX using wireless.
Do you know the exact security type that your D-Link router is using? That is the key element in the process.
Open AirPort utility, click Manual Setup
Click the Base Station tab to establish a name for the AX, device password and adjust time zone settings
Click the Wireless tab
Wireless Mode....Join a wireless network
Wireless Network Name...must exactly match your D-Link wireless network name
Enable ethernet clients if you want the port to be active (your D-Link must be compatible with ProxySTA for this to work)
Wireless Security...exact setting of the D-Link network. WEP security causes a lot of issues. Try to use WPA/WPA2 Personal, which is far more secure.
Wireless Password...must match the D-Link network
Click the Music icon to enable AirTunes
Click Update to save settings
Any luck?

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed?

Flash player does not work with new ICS Android 4.0.4 OS. Has this problem been addressed? I am using Firefox Beta for android and I also tried just Firefox.

Please check the Play Store app for any Flash updates and install them if present.

Home sharing does not work with new mountain lion update.

home sharing does not work with new mountain lion update. Does anyone else have the same issue. Updated all computers in my home, deauthorized and reauthorized each computer. turn off home sharing and turned it back on. don't know what else to do..please help...

Our Apple TVs continue to lose connection ever since installing Mountain Lion on the host computer. The only thing that fixes them is to quit and relaunch iTunes, which only works unti the ATV goes to sleep. If a movie is paused for more than a few minutes and the ATV goes to sleep, pressing play again on the remote is greeted with "There are no movies on this computer" or "Turn on Home Sharing."
If we stop a video on one ATV and attempt to resume it in another room, the error begins again. The other ATV can't connect until iTunes is relaunched.
My guess is that it has something to do with the new [annoying] security settings. But I still haven't found a fix other than restarting iTunes everytime we want to watch something from our downloads. Fail.

Line-in not working with new driv

Has anyone else had issues with the line-in jack not working with new drivers? Is there a way to get it to work??Very frustrated. Is there a link to the beta drivers, they worked better for me then the new one.

The line input on the mini requires a 'line-level' signal, so the only microphones that work are ones that have an amplified output. Standard mics don't generate enough voltage to drive the mini's amplifiers.
That's the reason the mics work with the Griffin device (it has an amplifier) but not the mini directly.

Zen Micro Photo not working with new XP SP2 install

Okay so my Zen Micro Photo stopped being recognised on my computer about ten months ago when I upgraded to WMP (for BBC iPlayer - it's compulsory to have it). Anyway I li'ved with this and have now got thoroughly sick of the same songs and nothing new so I have done a fresh install (on a brand new hard dri've) of Windows XP SP2 WMP9 with the sole intention of using this install/hard dri've?for the player. I used the original installation disk and it prompted me to upgrade to WMP0 as I installed everything. There were no errors during the install and I rebooted when prompted to.
When I attach the player it is recognised by the machine (task bar icon and correctly labelled in System > Hardware > Device Manager which reports it to be?working okay) but the Creative media software says "player not attached" when it is. It is not visible on My Computer as a dri've so I STILL have no access to the player. Player screen reports "docked" with a logo and is flashes a charging icon. Driver v5.2.0.0. The player plays fine but hasn't had new music on in almost a year
There is nothing else on the XP install (IE6 and everything - argh!) I did the registry permission tweak thing mentioned?here:?http://support.creative.com/kb/showa....aspx?sid=9287?but it didn't do anything.
Any help greatfully received!

Re: Zen Micro Photo not working with new XP SP2 install. Have you installed this plug-in?
Creative PlaysForSure Devices Plugin 5.00.36 for Creative MediaSource 5 Player/Organizer
Filesize : 27.9 MBDownload

Can older Airport Express work with new Airport Extreme?

I had an older airport base station (dome shaped) and I was extending it with an Airport Express. I didn't need extra range, it was so I could play my iTunes from my laptop through my home speakers (or use my iPhone to do the same). Now I bought one of the newer flat Base Stations but I can't seem to get it to hook up to the old Express so I can still play my music. Do the old Express's not work with the new base stations?
And if not, is there any other way for me to be able to play music wirelessly to my home stereo from my mac and iPhone/iPods, like I was able to do before?

Im thinking my Airport Express has failed. I tried hard resetting it several times and I can see it through Airport utility, nor my iPhone. The iPhone sees it, but it cannot set it up.
Looks like I need to get a new Airport Express no matter what. Ive had it for a Looooong time. So I guess its number was finally up.
Thanks for the response seancobrien.

Newer mac mini airport utility can't work with older airport express

Hi anyone who can help me out.
I have a relatively new mac mini (2012), and a much older airport express. I can accesss the internet no problem, but I cannot use the airport utility to chane the password on the airport expres. when I try, I get this message "This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information." I have the latest version of Airport utility (6.3.1), which is supposed to work with all generaions of airport express. I need to change the password, but I do not have any of the original set-up disks for the airport. How do I fix this?
Thanks for your help.
liametmanu

Unfortunately, AirPort Utility in Lion and Mountain Lion no longer supports the older wireless "b/g" versions of the AirPort Express. This would include model numbers A1084 and A1088.
Please locate the model number on the side of your AirPort Express devices to verify the version that you have.
If you have another Mac running the Leopard or Snow Leopard operating system, you can use AirPort Utilty on that Mac to administer the older Express. A PC could be used as well.
If you cannot use another Mac or PC, then you might want to consider trying an unsupported method to install an older version of AirPort Utility on your Mountain Lion Mac. No guarantees can be offered that this will be successful since Apple does not officially support this method, but it does seem to work for most users.
See this thread for more details:
https://discussions.apple.com/message/22940547#22940547
If nothing seems to work, the final option....likely the one that Apple wants you to use.....would be to buy a new AirPort Express.

Will older Airport Express Base Station A-1084 work with new AirPort Extreme? I want to use it as an access point for my ps3 for watching movies and just connectin to Internet.

I am lookin to plug in an older model a-1084 next to my playstation for a dedicated access point to avoid dropping so many connections since I am at the furthest point of my wifi coverage. Will it work or not? It would be connecting through a AirPort Extreme bought in 2011 -2012.

This will work if you plan to connect the AirPort Express using a wired Ethernet connection back to the AirPort Extreme.
But, it won't work if you plan to connect the Express using wireless only. That's because your older version of the Expess does not have a setting to "extend a wireless network", so it's not possible to "extend" the wireless signal using wireless only.
If you added a "new" AirPort Express, that version does have the capability to "extend a wireless network" from the AirPort Extreme using wireless only.
Keep in mind that to "extend" using wireless, the Express will need to be located where it can receive a strong signal from the AirPort Extreme, since the Express can only "extend" the quality of signal that it receives. In other words, the Express can make the signal go further, but it cannot make the signal go faster.

Issues Connecting to internet with new Airport Express

Running a Macbook pro 15" - 10.4.11
I just bought a brand new Airport Express a few days ago. I just recently got my internet service through Comcast restored and am eager to get a wireless network up so I can play Xbox Live again.
So issue is this: I plug the ethernet cable from the Cable modem into the airport, the light goes green. The computer is registering a strong signal, Network preferences says Airport is connected to my network. However, Safari keeps saying its not connected to the internet. When i run system diagnostics, I get a green light on Airport, Network settings, system settings, and ISP. But the light on Internet and Server stay red, and Diagnostics says it can't fix the problem and I need to contact my ISP. Comcast said they couldn't help, my connection was fine and they even refreshed it to no avail. When I plug my Ethernet cable directly into my Macbook pro, I get on the 'net no problem. I'm dumbfounded.
I'd appreciate any sage wisdom offered. Thanks!
p.s: Also, when I run a connection test on Xbox 360, it picks up my network, connects quickly, ISP confirms, but ultimately fails at DNS Server. Hmm.

bl4ckr4bbit, Welcome to the discussion area!
Most cable modems require that you power them off when you switch the Ethernet connection from one device to another. Until you reset the modem it will not communicate with the new device. When the modem is powered on it detects the new device and starts talking to it.
Some cable modems have a reset button on the back for this reset.
Some cable modems have a small internal battery which must be removed for this reset to occur.
Sometimes the cable modems must be unplugged several hours or even overnight to allow equipment back at the ISP to reset.
Did you power off the cable modem when switching the Ethernet connection?

Playstation 3 can't get on wifi with new Airport Express

Hi guys. I got the new Airport Express that was released a few days ago. My Mac and other iDevices all connect fine but for whatever reason my PS3 has issues resolving an IP address or whatever. At first I thought I'd solved it by turning off the only DHCP Reservation I had on (for my iMac) but the next day it's not connecting again.
Unfortunately I'm not much of a networking whiz.
I have it set to DHCP (not Static or PPoE) And I'm not sure what else to share but I'd really like to solve this.
It connected once or twice in attempts so I know neither the Airport Express Base Station nor the Ps3 is broken.
Just totally stumped here. :(

As an update, I noticed that the brief moments when my PS3 would attempt to connect, I would see another IP on my Airport Express Base Station. 10.0.1.3
So, wanting to try something out, I went into DHCP reservations on my AEBS and added a DHCP reservation for 10.0.1.3 and assigned my PS3's MAC address to it. I was able to connect instantly.
However, I've been connected briefly before, so only time will tell if it sticks. At this point I don't consider my situation resolved. Clearly my inability to connect has something to do with IP addresses and maybe the 'dynamic' one the PS3 sometimes gets assigned by the AEBS is something one of my other devices is already blocking or using?
I'm not a whiz at this stuff, so if anyone has any insights as to a good way to set up DHCP reservations so that everything works, I'm all ears.
Would it be wise to take the iMac, AppleTV, 2 iPads, and 2 iPhones and assign them ALL different DHCP reservations so that no one steps on anyone else's toes, so to speak?

Help with new airport express on older MAC

How can I use a new airport express on an older MAC? I am not able to install the new airport utility software because the MAC software is too old. Can I install the airport software on my newer PC. Will the older MAC be able to fist it and use it with AirPlay?

You can run Airport Express on v10.4 or later.
http://store.apple.com/us/product/MB321LL/A/AirPort-Express-AirTunes?mco=MTY3ODQ 5OTY
I use mine with two older laptops, one running Tiger, one running Leopard, as well as newer Macs running Snow Leopard.
Try installing the software from the CD. If there's a problem, you should see a dialog box.
http://manuals.info.apple.com/en_US/AirPort_Express_Setup_Guide.pdf

Safari not working with new airport express

Similar Messages

Maybe you are looking for