Safari Vulnerability - Test for script running

Hi everyone,
Just wondering if anyone out there knows how to test if someone has a script running on your computer, in relation to the vulnerability from safari.
The last few days I have not been able to load the Apple.com/au website or log into "My eBay" page. It seems as though someone is blocking it. It gets to a certain stage and will just not load anymore. Other sites load just fine.
I upgraded to 10.4.5 and was able to load these pages for a brief period of time and then it reverted to not being able to load again.
Is someone controlling my computer and can they get access to sensitive info??
Cheers.
iMac 20" G5 Mac OS X (10.4.5)

Thanks for the suggestion, however I am using alternate credentials when using Add-Computer. I had taken that out of the script as shown, as I've been simplifying the code down to isolate my issue. That probably wasn't clear from my initial post.
Just to clarify, The script itself runs as Local System since it's getting launched by the local computer GPO. Even with providing alternate credentials to the Add-Computer cmdlet, the script doesn't execute the command correctly and the script never actually
completes. I know that it is stuck at the Add-Computer cmdlet as I had put some debugging logging to a text file, and that's the last message that appears in the text file.
In the simplifiction of my code, I was attempting to use Invoke-Command in a different user context to execute the Add-Computer cmdlet. Again, the Add-Computer was removed to simplify for debugging, but I have again run into the same issue where the script
running as Local System now hangs at the following line of the script:
$localSession = New-PSSession -Credential $LocalCred
Again, I'm able to confirm that from the logging I've put in, and that's the last message that's written
to the logfile, and I can see the process still running in Task Manager and I end up having to terminate.
Hopefully that makes some sense and someone has come across this issue.

Similar Messages

Failed to run syspref "Test for CloneTag in registry to verify Sysprep completed"

Hi All
After install windows 7 and some application i try to capture and sysypref from running script
cscript \\server\DeploymentShare\Scripts\LiteTouch.wsf
i get below error
<![LOG[FAILURE (Err): -2147024894 0x80070002: Test for CloneTag in registry to verify Sysprep completed. - Unable to open registry key "HKEY_LOCAL_MACHINE\System\Setup\CloneTag" for reading.]LOG]!><time="12:47:30.000+000" date="01-31-2010" component="LTISysprep" context="" type="2" thread="" file="LTISysprep">
<![LOG[FAILURE ( 6191 ): Test for CloneTag in registry to verify Sysprep completed. - Unable to open registry key "HKEY_LOCAL_MACHINE\System\Setup\CloneTag" for reading.]LOG]!><time="12:47:30.000+000" date="01-31-2010" component="LTISysprep" context="" type="3" thread="" file="LTISysprep">
<![LOG[Litetouch deployment failed, Return Code = -2147467259 0x80004005]LOG]!><time="12:47:31.000+000" date="01-31-2010" component="LiteTouch" context="" type="3" thread="" file="LiteTouch">
<![LOG[For more information, consult the task sequencer log ...\SMSTS.LOG.]LOG]!><time="12:47:31.000+000" date="01-31-2010" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
<![LOG[Property RetVal is now = -2147467259]LOG]!><time="12:47:31.000+000" date="01-31-2010" component="LiteTouch" context="" type="1" thread="" file="LiteTouch">
Thanks ,
Davide

Hello
Just thought I would add my fix for this issue for anyone who is still getting it:
Go into Services.msc and stop and disable the following service: "Windows Media Player Network Sharing Service"
Then sysprep continues on past the stage where it gives the warning about the CloneTag key and successfully completes (hopefully!).
In this instance if you instead manually re-add the CloneTag key the image will give a BSOD on restart if you try to deploy it (mine did anyway).
It appears the error occurs and the sysprep stage fails so the CloneTag is not set to stop the deployment going any further.
If the task sequence is failing then it may be better to run a local sysprep and generalize from c:\windows\system32\sysprep\sysprep.exe as this gives better error messages.
It's also good to build the reference computer image in a virtual machine which you can snapshot before you start so can quickly revert back and try again if it messes up (as mine did a few times until I worked out the cause).
Your issue may not be the same as mine though but hope it helps someone.
Robin
P.S. Looking online it looks like the bug with the windows media sharing service goes back as far as pre RTM builds.
Robin Wilson
Thanks, this worked for me trying to sysprep Windows 7 x64 Home Premium.

Parameters for Shell Script running through DBMS_SCHEDULER as Executable

Hi,
I'm using Oracle 10.2.0.1 on Solaris.
I have a shell script to run through DBMS_SCHEDULER.
DBMS_SCHEDULER.CREATE_PROGRAM (
program_name => 'PROGRAM_NAME',
program_type => 'EXECUTABLE',
program_action => '/home/oracle/test.sh',
enabled => TRUE,
comments => 'Test Shell Script'
But how do I define the parameters for the shell script?
Lets say if I run the shell script from the Unix promt I will enter as below:
/home/oracle/test.sh PITS aed5 XYZ
How do I define it in the DBMS_SCHEDULER.define_program_argument?
Thanks,
Shail

When you create the program you define the number of parameters it will accept:
DBMS_SCHEDULER.CREATE_PROGRAM (
program_name => 'PROGRAM_NAME',
program_type => 'EXECUTABLE',
program_action => '/home/oracle/test.sh',
enabled => TRUE,
comments => 'Test Shell Script',
number_of_arguments     => 3
);then you define your job arguments and set default values. This is optional - but if you don't then you will have to define the values using the set_job_argument_value:
-- defines the first argument
DBMS_SCHEDULER.DEFINE_PROGRAM_ARGUMENT(
   program_name   => 'PROGRAM_NAME',
   argument_position   => 1,
   argument_name           => 'arg1',
   argument_type           'CHAR',
   default_value          => 'PITS',
);You can set the argument vaues using:
DBMS_SCHEDULER.SET_JOB_ARGUMENT_VALUE (
   job_name => 'JOB1',
   argument_position => 1,
   argument_value => 'PITS');or using the argument name defined using the define_program argument
DBMS_SCHEDULER.SET_JOB_ARGUMENT_VALUE (
   job_name => 'JOB1',
   argument_name => 'arg1',
   argument_value => 'PITS');where JOB1 is a job for program PROGRAM_NAME created using the dbms_scheduler.create_job procedure
see docmentation: http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_sched.htm for more details...

Parameters for Shell Script running DBMS_SCHEDULER as Executable

Hi,
I have a shell script to run through DBMS_SCHEDULER.
DBMS_SCHEDULER.CREATE_PROGRAM (
program_name => 'PROGRAM_NAME',
program_type => 'EXECUTABLE',
program_action => '/home/oracle/test.sh',
enabled => TRUE,
comments => 'Test Shell Script'
But how do I define the parameters for the shell script?
Lets say if I run the shell script from the Unix promt I will enter as below:
/home/oracle/test.sh -d aed5 -p "XYZ"
How do I define it in the DBMS_SCHEDULER.define_program_argument?
Thanks in advance,
Samujjwal Basu

Re: Excute Unix command Using PL SQL might help.

[svn] 4637: Update config testsuite on blazeds/ trunk to run mxunit tests for a configuration if there are any mxunit tests found in the configuration test directory .

Revision: 4637
Author: [email protected]
Date: 2009-01-23 04:40:16 -0800 (Fri, 23 Jan 2009)
Log Message:
Update config testsuite on blazeds/trunk to run mxunit tests for a configuration if there are any mxunit tests found in the configuration test directory. Change some things around in the mxunit build.xml to make this possible, mainly allow things like test directory, reports directory etc. to be passed in as ant properties.
Add browserServer.jar to the qa-regress-sdk.zip file used for regression runs.
Update blazeds/trunk to use the latest qa-frameworks.zip.
Checkintests: passed
Modified Paths:
blazeds/trunk/qa/apps/qa-regress/build.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/config/build.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/mxunit/build.xml
blazeds/trunk/qa/resources/frameworks/qa-frameworks.zip

Just checked but could only find this thread Unable to run ADFBC JUNIT Test Classes with JDEV11G 11.1.1.6
As it's also dealing with junit and 11.1.1.6.0 you might want to read it.
Timo

How to run Flexunit tests for FlexModule

Hello,
I have a module for which I have wrriten flexunit testcases.
In my test case, event is dispatched, but is not able to be listening by the associated command (parsley framework). In the browser, it says Errors: 1
In FlexUnitApplication,
testRunner.runWithFlexUnit4Runner(currentRunTestSuite(),
"moduleName");
What exactly should be mentioned in project name(2nd argument of above method)?
Please help in troubleshooting why my test wont be running.
Thanks,
Tanu

I started to use JFXtras' testing framework to test the model, not the UI... Works nicely.
For testing the GUI, I saw the article [Testing JavaFX UIs: Part 2 of ?|http://java.dzone.com/news/testing-javafx-uis-part-2] (and the previous one), but haven't tried yet.

How can i get or download the apple hardware test for a macbook pro made in 2012 running Mavericks 10.9.3

Does anyone know how can i get or download the apple hardware test for a macbook pro made in 2012 running Mavericks 10.9.3. Thanks.

Sean and Andy -
I have to agree with Andy here. I am having the same problem on a mid 2010 MBP (6,2). I have already read the AHT info provided by Sean's link, and they are less than helpful. I'm sure they will be helpful to those who find that they work, but they are confusing if this is not the case. For example, my MBP(6,2) came with ONE (not two) installation disks, so the instructions don't work for me. Another issue is the instructions confound the descriptions related to the MBP, the original (delivered) software (OS X version), and the current installed OS X upgrade software.
So here's what does NOT work for me...
     (A) I cannot install 'Disk 2', since I never received this with my original (new) purchase in mid 2010.
     (B) I have checked my firmware versions and they are all up to date, as per Apple's information.
     (C) As suggested in another thread, I looked for /Library/Core Services/.diagnostics and it was NOT present. I followed his instructions, downloaded the correct (I believe) dmg, and installed it. It is in the correct place, and I can see all the invisible files using Pathfinder.
     (D) When I re-start holding down the D key (immediately), it just goes through the normal boot routine; no evidence of AHT.
     (E.1) When I re-start holding down OPT-D, I get a spinning globe, and then it prompts me for a network (wi-fi) connection.
     (E.2) For some unknown reason, the prompt identifies between 2 and 5 of my --neighbors'-- routers, but does not show mine. (??!!)
     (E.3) The routers are listed alphabetically; however, my router SHOULD be at the top of the list by this criterion, but it is nowhere to be seen.
     (E.4) The 'internet recovery' process then allows me to enter a network name AND password. I do this, for my current wi-fi router, and the process rejects it as an incorrect login ID. It is NOT an incorrect login ID!
So, now asking Sean and Andy (or anyone else) for further suggestions... ??? As Andy suggested, many people ask questions here because they have -already- worked through the 'official' recommendations, and have found them to be inadequate.
Any advice would be appreciated! TIA.
Ed

[svn:bz-trunk] 18814: Add manual test for BLZ-594 with instructions on how to run the test.

Revision: 18814
Revision: 18814
Author:   [email protected]
Date:     2010-11-24 09:31:56 -0800 (Wed, 24 Nov 2010)
Log Message:
Add manual test for BLZ-594 with instructions on how to run the test.
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-594
Modified Paths:
    blazeds/trunk/qa/apps/qa-manual/WEB-INF/flex/remoting-config.mods.xml
Added Paths:
    blazeds/trunk/qa/apps/qa-manual/WEB-INF/src/test/
    blazeds/trunk/qa/apps/qa-manual/WEB-INF/src/test/RpcTest.java
    blazeds/trunk/qa/apps/qa-manual/bugs/BLZ-594/
    blazeds/trunk/qa/apps/qa-manual/bugs/BLZ-594/BLZ-594.mxml
    blazeds/trunk/qa/apps/qa-manual/bugs/BLZ-594/readme.txt

You do have a very complex looking site and may need several tables in mysql to handle all that data. If you knew to phpmysql I would suggest taking a look at this tutorial it will help get you started in understanding how to $_GET info from a database and also how to $_POST data to a database. I am no expert just learning myself and I found this very helpful. This is the link http://www.adobe.com/devnet/dreamweaver/articles/first_dynamic_site_pt1.html
There are also many tutorials on Youtube to help build a CMS Content Management Site I would suggest the following: -
http://www.youtube.com/user/phpacademy
http://www.youtube.com/user/betterphp
http://www.youtube.com/user/flashbuilding
And many more on my channel here
http://www.youtube.com/user/Whisperingonthewind
CMS's are easier to maintain, add edit and delete content.
I have also recently bought a Book by David Powers Training from the Source very helpful.
Anyway hope you get it sorted.

How to test for existence of AcroXFA test objects?

Hi -
I'm writing scripts to test an XFA form with dynamic subforms. For example, at the end of Part 4, the user hits a Validate button, and if their data is correct, then the Validate button disappears and a Part 5 subform appears.
So my script looks something like this:
Function GetButtonPart4Validate()
   Set GetButtonPart4Validate = PDFDoc("TestForm").AcroXFAForm("form").AcroXFAForm("form1")
.AcroXFAForm("sfPart4").AcroXFAButton("sfValidate")
End Function
Function GetPart5()
   Set GetPart5 = PDFDoc("TestForm").AcroXFAForm("form").AcroXFAForm("form1").AcroXFAForm("sfPart5")
End Function
GetButtonPart4Validate().Click
PDFDoc( "TestForm" ).WaitProperty "ready", true, 60000 ' Wait for event processing complete
If DataTable("boolValidates", dtLocalSheet) = "TRUE" Then
     If( GetPart5().Exist ) Then
          ' A: Checkpoint Succeeds: Validation was successful
     Else
          ' B: Checkpoint fails: Validation failed
     Endif
Else
     If( GetPart5().Exist ) Then
          ' C: Checkpoint Fails: Validation was unexpected
     Else
           ' D: Checkpoint Succeeds: Validation failed as expected
     Endif
Endif
Unfortunately it appears that XfaSubForm.Exist always returns TRUE. In other QTP testing domains (eg "Exist Property (WinObject)" in QTP Help), the documented behaviour of the Exist property is to be true if the desired test object can be found in the application-under-test. Typically this means that when the script tries to access an XFA widget which doesn't exist (even something like GetPart5().getROProperty("visible") ), the script stops and thinks for a minute or so, and eventually produces a test error that the object doesn't exist then muddles onward. It is the "stops and thinks for a minute or so" which frustrates me, since these are delays which I am trying to avoid.
Another possible angle I looked into was counting the subforms under Part 5's parent.
PDFDoc("TestForm").AcroXFAForm("form").AcroXFAForm("form1").RefreshObject
PDFDoc("TestForm").AcroXFAForm("form").AcroXFAForm("form1").AcroXFAForm("sfPart5").Refresh Object
' check to see if there is a 'sfPart5'
Dim MyChildren, i
Set MyChildren = PDFDoc("TestForm").AcroXFAForm("form").AcroXFAForm("form1").ChildObjects
For i=0 to MyChildren.Count - 1
    print i & " name=" & MyChildren(i).GetROProperty("name")
Next
This also seems to fail: Part5 doesn't appear among its parent's children (at least before QTP actually tries to use it).
The PDF Test Toolkit User Guide doesn't specifically mention that Exist or RefreshObject or ChildObjects are implemented, so I can't say AcroQTP isn't working as designed, but if you're looking for suggestions for improvement, I'll vote for fulfilling these parts to the QTP. Please confirm my conclusions that these are not properly implemented, or whether I'm missing something.
In the meantime, do you have any recommendation on how to proceed? My present workaround is to look for a "validation error" windows dialog that indicates Part 5 won't exist, but this won't work in future test scripts.
Cheers,
Brent

Hi,
816387 wrote:
... QUERY:- Find all customers who have at most one account at the Perryridge branch.
SOLUTION *1* :-
select customer_name
from depositor,account
where account.account_number=depositor.account_number and
branch_name='Perryridge'
group by customer_name
having count(account.account_number) <=1
ok running correctly
That finds customers who have exactly one account at Perryridge.
The assignment is to find customers who have at most one account at Perryridge. You need to include customers with 0 accounts at Perryridge, as well. You could use an outer join, or MINUS, or a NOT IN subquery, or a NOT EXISTS sub-query (as mentioned above) to do that.
Can there be customers who have no accounts at all, at any branch? If so, you'll need to use the customer table in this problem, as well as depositor and account.
>
SOLUTION *2* :-
select D1.customer_name
from depositor D1
where unique
(select customer_name
     from depositor D2,account A1
     where D1.customer_name=D2.customer_name
          D2.account_number=A1.account_number and
          branch_name='Perryridge'
gives error:-
where unique
..........*^*
ERROR at line 3:
ORA-00936: missing expression
Logic of both solution are correct . But Solution 2 gives error in oracle. I want unique construct to work.Sorry, it doesn't in Oracle. I don't know of anything like that in Oracle.
Does "WHERE UNIQUE (SELECT ...)" work in some other database system? Which?
How to do it. Or How can i test for the absence of duplicate tuples ??????
Your Solution 1 is the best way to find customers with exatly 1 account (rather than 0 or 1 accounts) at Perryridge. Is there any reason why you wouldn't want to use it, if you ever needed to find customers with exactly one account there?

How do I test for the presence of an active open document in Photoshop?

I’m new to Adobe scripting, and one of my first scripts deals with the activeDocument in Photoshop.
If there is no activeDocument, I want to display a message and terminate the script. My efforts
so far have been met with frustration. While developing the script in ExtendScript Toolkit,
I used the test expression "activeDocument in app", and everything worked as expected. And when I installed the script
in the Photoshop scripts folder and ran it from Photoshop with a document open, it also worked.
But when I ran the script from Photoshop with no document open, it failed.
Moreover, after that,the script failed when I tried to run it in ESTK.
I did some testing and found that my test expression, "activeDocument in app"
was returning true, even though no document was open.
Still in ESTK, I replaced the “app” with ”Application” in the test expression. That worked when
I stepped through the script. But when I tried to run it without stopping, it stopped at the
test expression, and displayed the error message, “Application is undefined.”
So how do I test for the presence of an open document in Photoshop ??

After posting this, I discovered the Photoshop Scripting Forum, and I found my answer there.—
I should have used “app.Documents.length” as my test expression.

What actions should I take after seeing this script running @ startup today? "ARDAgent\" to do shell script \"say quack\"'"

STEPS TAKEN:
Logged into Mac for first time today.
Noticed a new individual file in Directory Library ".a.text". (Settings disply hidden system file/folders)
File contained only the text "--purge".
Meta data on file directed source to bash process run @ startup.
Attached History command output.
Disabled ARD for now.
SETTINGS:
All Sharing was Off.
Firewall was set to Block All Incoming Connections.
Home network with no other active users at time.
Upgraded to Mavs 10.9.2 last night.
Do not use any file sharing or remote access into Mac.
The SSH host attempts were my old Amazon EC2 instances.
Appears to start bitcoin app and few databases.
Worth noting I've been having tons of various issues last few months.
Thanks.
<POB> My CommandLine prompts. XXXX on locals.
XXXXXX:~ Administrator$ export HISTTIMEFORMAT='%F %T '
XXXXXX:~ Administrator$ history
<POB> OUTPUT
    1 2014-02-27 17:23:35 rm -rf ~/.Trash/*
    2 2014-02-27 17:23:35 cd
    3 2014-02-27 17:23:35 .
    4 2014-02-27 17:23:35 ./
    5 2014-02-27 17:23:35 cd
    6 2014-02-27 17:23:35 lib
    7 2014-02-27 17:23:35 cd/
    8 2014-02-27 17:23:35
    9 2014-02-27 17:23:35 ls
   10 2014-02-27 17:23:35 cd downloads
   11 2014-02-27 17:23:35 ls downloads
   12 2014-02-27 17:23:35 ls Downloads
   13 2014-02-27 17:23:35 find / -nouser -ls
   14 2014-02-27 17:23:35 find /~nouser -ls
   15 2014-02-27 17:23:35 ls
   16 2014-02-27 17:23:35 ls /library
   17 2014-02-27 17:23:35 /LaunchAgents
   18 2014-02-27 17:23:35 ls /LaunchAgents
   19 2014-02-27 17:23:35 ls /Automator
   20 2014-02-27 17:23:35 ls /KeyChains
   21 2014-02-27 17:23:35 sha
   22 2014-02-27 17:23:35 toop
   23 2014-02-27 17:23:35 top
   24 2014-02-27 17:23:35 dscl . -list /Users UniqueID
   25 2014-02-27 17:23:35 $ dscl -plist . readall /users
   26 2014-02-27 17:23:35 $ dscl . readall /users
   27 2014-02-27 17:23:35 $ dscl . readall /503
   28 2014-02-27 17:23:35 ls/Users
   29 2014-02-27 17:23:35 - dscacheutil -q group
   30 2014-02-27 17:23:35 cd
   31 2014-02-27 17:23:35 cd.
   32 2014-02-27 17:23:35 cd .
   33 2014-02-27 17:23:35 ls
   34 2014-02-27 17:23:35 ifconfig
   35 2014-02-27 17:23:35 ifconfig
   36 2014-02-27 17:23:35 ifconfig
   37 2014-02-27 17:23:35 config helper
   38 2014-02-27 17:23:35 config
   39 2014-02-27 17:23:35 ls
   40 2014-02-27 17:23:35 ssh awsXXXX
   41 2014-02-27 17:23:35 defaults write com.google.Keystone.Agent checkInterval 0
   42 2014-02-27 17:23:35 exit
   43 2014-02-27 17:23:35 exit
   44 2014-02-27 17:23:35 /var/log/secure.log
   45 2014-02-27 17:23:35 ssh awsXXXXXX
   46 2014-02-27 17:23:35 exit
   47 2014-02-27 17:23:35 kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
   48 2014-02-27 17:23:35 sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfi x|x)/{print $3}'
   49 2014-02-27 17:23:35 launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
   50 2014-02-27 17:23:35 ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta} * L*/Fonts 2> /dev/null
   51 2014-02-27 17:23:35 osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
   52 2014-02-27 17:23:35 top
   53 2014-02-27 17:23:35 ps
   54 2014-02-27 17:23:35 top
   55 2014-02-27 17:23:35 top
   56 2014-02-27 17:23:35 top
   57 2014-02-27 17:23:35 sudo /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/Resources/k ickstart -agent -stop
   58 2014-02-27 17:23:35 man who
   59 2014-02-27 17:23:35 who
   60 2014-02-27 17:23:35 whoami
   61 2014-02-27 17:23:35 ps -aux
   62 2014-02-27 17:23:35 ps
   63 2014-02-27 17:23:35 top
   64 2014-02-27 17:23:35 ps -eo pid,etime
   65 2014-02-27 17:23:35 top
   66 ??ps aux | less
   67 2014-02-27 17:23:35 pstree
   68 2014-02-27 17:23:35 ps -eo euser,ruser,suser,fuser,f,comm,label
   69 2014-02-27 17:23:35 pgrep
   70 2014-02-27 17:23:35 pgrep remote
   71 2014-02-27 17:23:35 apt-get install htop
   72 2014-02-27 17:23:35 htop
   73 2014-02-27 17:23:35 netstat -tulpn | grep :80
   74 2014-02-27 17:23:35 ls -l /proc/635/exe
   75 2014-02-27 17:23:35 swapon -a
   76 2014-02-27 17:23:35 ma ps
   77 2014-02-27 17:23:35 man ps
   78 2014-02-27 17:23:35 man ps
   79 2014-02-27 17:23:35 ps -a
   80 2014-02-27 17:23:35 ps -A
   81 2014-02-27 17:23:35 whoami
   82 2014-02-27 17:23:35 ps -f
   83 2014-02-27 17:23:35 ps -G
   84 2014-02-27 17:23:35 ps -g
   85 2014-02-27 17:23:35 ps -T
   86 2014-02-27 17:23:35 ps-t
   87 2014-02-27 17:23:35 ps -v
   88 2014-02-27 17:23:35 ps start
   89 2014-02-27 17:23:35 top
   90 2014-02-27 17:23:35 ps
   91 2014-02-27 17:23:35 users
   92 2014-02-27 17:23:35 last
   93 2014-02-27 17:23:35 ls /var/log/wtmp*
   94 2014-02-27 17:23:35 last -f /var/log/wtmp.1
   95 2014-02-27 17:23:35 last -f /var/log/wtmp.0
   96 2014-02-27 17:23:35 ~/.bash_history
   97 2014-02-27 17:23:35 cat ~/.bash_history
   98 2014-02-27 17:23:35 ls /Automator
   99 2014-02-27 17:23:35 cat Automator
100 2014-02-27 17:23:35 open ~/.bash_history
101 2014-02-27 17:23:35 dscl . readall /users
102 2014-02-27 17:23:35 ls/library
103 2014-02-27 17:23:35 cd/library
104 2014-02-27 17:23:35 cd..
105 2014-02-27 17:23:35 cd
106 2014-02-27 17:23:35 ls
107 2014-02-27 17:23:35 cd Library
108 2014-02-27 17:23:35 cd/Library
109 2014-02-27 17:23:35 ls/Automator
110 2014-02-27 17:23:35 toop
111 2014-02-27 17:23:35 top
112 2014-02-27 17:23:35 ifconfig
113 2014-02-27 17:23:35 config helper
114 2014-02-27 17:23:35 config
115 2014-02-27 17:23:35 top
116 2014-02-27 17:23:35 ps -a
117 2014-02-27 17:23:35 ps -A
118 2014-02-27 17:23:35 ps -aux
119 2014-02-27 17:23:35 ps
120 2014-02-27 17:23:35 getprocessforpid(677)
121 2014-02-27 17:23:35 man ps
122 2014-02-27 17:23:35 ps -U
123 2014-02-27 17:23:35 ps -u
124 2014-02-27 17:23:35 GetProcessPID(494)
125 2014-02-27 17:23:35 GetProcessPID() q
126 2014-02-27 17:23:35 GetProcessPID494
127 2014-02-27 17:23:35 GetProcessPID 494
128 2014-02-27 17:23:35 netstat -b
129 2014-02-27 17:23:35 top
130 2014-02-27 17:23:35 top
131 2014-02-27 17:23:35 top
132 2014-02-27 17:23:35 netstat -a
133 2014-02-27 17:23:35 netstat -a | grep vnc | grep ESTABLISHED
134 2014-02-27 17:23:35 top
135 2014-02-27 17:23:35 netstat -a
136 2014-02-27 17:23:35 top
137 2014-02-27 17:23:35 top
138 2014-02-27 17:23:35 netstat -a
139 2014-02-27 17:23:35 ps -aux
140 2014-02-27 17:23:35 netstat -a | grep vnc | grep ESTABLISHED
141 2014-02-27 17:23:35 ps -aux
142 2014-02-27 17:23:35 ps -A
143 2014-02-27 17:23:35 ps -A
144 2014-02-27 17:23:35 netstat -a | grep vnc | grep ESTABLISHED
145 2014-02-27 17:23:35 netstat -a
146 2014-02-27 17:23:35 top
147 2014-02-27 17:23:35 top
148 2014-02-27 17:23:35 netstat -a
149 2014-02-27 17:23:35 netstat -a
150 2014-02-27 17:23:35 netstat -a
151 2014-02-27 17:23:35 q
152 2014-02-27 17:23:35 top
153 2014-02-27 17:23:35 top
154 2014-02-27 17:23:35 sudo tmutil disablelocal
155 2014-02-27 17:23:35 exit
156 2014-02-27 17:23:35 top
157 2014-02-27 17:23:35 top
158 2014-02-27 17:23:35 top
159 2014-02-27 17:23:35 top
160 2014-02-27 17:23:35 top
161 2014-02-27 17:23:35 top
162 2014-02-27 17:23:35 neststat -n
163 2014-02-27 17:23:35 netstat -n
164 2014-02-27 17:23:35 netstat -n
165 2014-02-27 17:23:35 ls
166 2014-02-27 17:23:35 lsaf
167 2014-02-27 17:23:35 cd ..
168 2014-02-27 17:23:35 cd ..
169 2014-02-27 17:23:35 cd ..
170 2014-02-27 17:23:35 cd ..
171 2014-02-27 17:23:35 ls
172 2014-02-27 17:23:35 top
173 2014-02-27 17:23:35 netstat
174 2014-02-27 17:23:35 dscl . list/users
175 2014-02-27 17:23:35 cd ~
176 2014-02-27 17:23:35 dscl . list/users
177 2014-02-27 17:23:35 dscl . list /users
178 2014-02-27 17:23:35 dscl . list /groups
179 2014-02-27 17:23:35 dscl . readall /users
180 2014-02-27 17:23:35 netstat
181 2014-02-27 17:23:35 netstat
182 2014-02-27 17:23:35 whoami
183 2014-02-27 17:23:35 ls
184 2014-02-27 17:23:35 cd ..
185 2014-02-27 17:23:35 cd ..
186 2014-02-27 17:23:35 cd .
187 2014-02-27 17:23:35 cd ..
188 2014-02-27 17:23:35 ls
189 2014-02-27 17:23:35 tree
190 2014-02-27 17:23:35 cd Users
191 2014-02-27 17:23:35 ls
192 2014-02-27 17:23:35 cd Administrator
193 2014-02-27 17:23:35 ls
194 2014-02-27 17:23:35 cd ..
195 2014-02-27 17:23:35 cd ..
196 2014-02-27 17:23:35 cd ..
197 2014-02-27 17:23:35 ls
198 2014-02-27 17:23:35 cd Users
199 2014-02-27 17:23:35 ls
200 2014-02-27 17:23:35 cd Adminstrator
201 2014-02-27 17:23:35 cd Administrator
202 2014-02-27 17:23:35 ls
203 2014-02-27 17:23:35 cd Downloads
204 2014-02-27 17:23:35 ls
205 2014-02-27 17:23:35 exit
206 2014-02-27 17:23:35 whoami
207 2014-02-27 17:23:35 ls
208 2014-02-27 17:23:35 ls
209 2014-02-27 17:23:35 cd Library
210 2014-02-27 17:23:35 ls
211 2014-02-27 17:23:35 cd Application Support
212 2014-02-27 17:23:35 ls
213 2014-02-27 17:23:35 cd ..
214 2014-02-27 17:23:35 ls
215 2014-02-27 17:23:35 cd ..
216 2014-02-27 17:23:35 ls
217 2014-02-27 17:23:35 cd pXXXXXXXX
218 2014-02-27 17:23:35 ls
219 2014-02-27 17:23:35 cd Library
220 2014-02-27 17:23:35 whoami
221 2014-02-27 17:23:35 sudo - Adminsitrator
222 2014-02-27 17:23:35 ls
223 2014-02-27 17:23:35 ls
224 2014-02-27 17:23:35 sudo -
225 2014-02-27 17:23:35 more /etc/hosts
226 2014-02-27 17:23:35 scc ver
227 2014-02-27 17:23:35 scc numprofiles
228 2014-02-27 17:23:35 netstat -an |find /i "listening"
229 2014-02-27 17:23:35 netstat
230 2014-02-27 17:23:35 top
231 2014-02-27 17:23:35 kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
232 2014-02-27 17:23:35 sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfi x|x)/{print $3}'
233 2014-02-27 17:23:35 launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
234 2014-02-27 17:23:35 ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta} * L*/Fonts 2> /dev/null
235 2014-02-27 17:23:35 osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
236 2014-02-27 17:23:35 osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
237 2014-02-27 17:23:35 top
238 2014-02-27 17:23:35 dscacheutil -flushcache
239 2014-02-27 17:23:35 sudo killall -HUP mDNSResponder
240 2014-02-27 17:23:35 top
241 2014-02-27 17:23:35 ./bitcoin-qt
242 2014-02-27 17:23:35 cd $home
243 2014-02-27 17:23:35 ls
244 2014-02-27 17:23:35 cd ..
245 2014-02-27 17:23:35 cd ..
246 2014-02-27 17:23:35 cd ..
247 2014-02-27 17:23:35 ls
248 2014-02-27 17:23:35 cd Applications
249 2014-02-27 17:23:35 ls
250 2014-02-27 17:23:35 ./bitcoin-qt.app
251 2014-02-27 17:23:35 top
252 2014-02-27 17:23:35 ps -420
253 2014-02-27 17:23:35 ps -9541
254 2014-02-27 17:23:35 top
255 2014-02-27 17:23:35 /Applications/Postgres93.app/Contents/MacOS/bin/psql ; exit;
256 2014-02-27 17:23:35 /Applications/Postgres93.app/Contents/MacOS/bin/psql ; exit;
257 2014-02-27 17:23:35 top
258 2014-02-27 17:23:35 ps -a (2077)
259 2014-02-27 17:23:35 ps -a2077
260 2014-02-27 17:23:35 sudo launchctl unload -w /System/Library/LaunchDaemons/com.apple.metadata.mds.plist
261 2014-02-27 17:23:35 top
262 2014-02-27 17:23:35 on run
263 2014-02-27 17:23:35 do shell script "osascript -e 'tell app \"ARDAgent\" to do shell script \"say quack\"'"
264 2014-02-27 17:23:35 end run
265 2014-02-27 17:23:35 ls -ls /System/Library/Filesystems/AppleShare/check_afp.app/Contents/MacOS/check_afp 2
266 2014-02-27 17:23:35 sudo launchctl load -w /System/Library/LaunchDaemons/com.apple.metadata.mds.plist
<POB> END

I'm extremely unclear on exactly what's happening. You mention something about a script running at startup in your subject, but then never mention that again. What's going on there? Where are you finding that script?
That script would suggest someone playing a joke on you, by making your computer say "quack" every time you start up. That's not indicative of malware.
On the other hand, a hidden file as you describe is a common malware trick, though I'm not sure why it would only contain "--purge" - that isn't a complete command, as far as I know, and the purge command isn't likely to be used for malicious purposes anyway.
Still, you do have some indication that you're using Bitcoin-related apps, and there has been some Bitcoin malware that has appeared recently. See:
New CoinThief malware discovered
Note that the post on MacRumors that you refer to in your second post is almost six years old, and references a vulnerability that was closed later in 2008. It's completely irrelevant to any modern system.

Oracle Streams ORA-23616: Failure in executing block 167 for script

oracle : Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production
os : linux i686 i686 i386 GNU/Linux
application : testing streams for schema ROOT
1. Both the databases INDCTRAK, INDDTRAK are in archive.
2. DB link created
CREATE DATABASE LINK dbl_INDDTRAK CONNECT TO strmadmin IDENTIFIED BY strmadmin USING 'INDDTRAK';
3. tbs created
CREATE TABLESPACE streams_tbs datafile '/u02/oradata/INDDTRAK/streams01.dbf' size 100m;
4 user created
CREATE USER strmadmin IDENTIFIED BY strmadmin DEFAULT TABLESPACE streams_tbs TEMPORARY TABLESPACE temp
QUOTA UNLIMITED ON streams_tbs;
5. All req. grants
GRANT CONNECT, RESOURCE, DBA ,Select_CATALOG_ROLE,
SELECT ANY DICTIONARY TO strmadmin;
6. grants
BEGIN
DBMS_STREAMS_AUTH.GRANT_ADMIN_PRIVILEGE (Grantee => 'strmadmin',Grant_privileges => true);
END;
PL/SQL procedure successfully completed.
7. Created directory
CREATE OR REPLACE DIRECTORY ADMIN AS '/u02/oradata/INDDTRAK/streams';
step 2-7 executed without errors
8.run with perform_actions as false
SQL> BEGIN
2 DBMS_STREAMS_ADM.MAINTAIN_SCHEMAS(
3 schema_names =>'ROOT',
4 source_directory_object =>'ADMIN',
5 destination_directory_object =>'ADMIN',
6 source_database => 'INDCTRAK',
7 destination_database => 'INDDTRAK',
8 perform_actions => false,
9 script_name => 'schema_replication.sql',
10 script_directory_object => 'admin',
11 dump_file_name => 'ROOT.DMP',
12 capture_name => 'capture_ROOT',
13 capture_queue_table => 'rep_capture_queue_table',
14 capture_queue_name => 'rep_capture_queue',
15 capture_queue_user => null,
16 propagation_name => 'prop_ROOT',
17 apply_name => 'apply_ROOT',
18 apply_queue_table => 'rep_dest_queue_table',
19 apply_queue_name => 'rep_dest_queue',
20 apply_queue_user => null,
21 log_file => 'exp.log',
22 bi_directional => false,
23 include_ddl => true,
24 instantiation => dbms_streams_adm.instantiation_schema_network);
25 END;
26 /
9. when running perform_actions true getting error
SQL> BEGIN
2 DBMS_STREAMS_ADM.MAINTAIN_SCHEMAS(
3 schema_names =>'ROOT',
4 source_directory_object =>'ADMIN',
5 destination_directory_object =>'ADMIN',
6 source_database => 'INDCTRAK',
7 destination_database => 'INDDTRAK',
8 perform_actions => TRUE,
9 script_name => 'schema_replication.sql',
10 script_directory_object => 'admin',
11 dump_file_name => 'ROOT.DMP',
12 capture_name => 'capture_ROOT',
13 capture_queue_table => 'rep_capture_queue_table',
14 capture_queue_name => 'rep_capture_queue',
15 capture_queue_user => null,
16 propagation_name => 'prop_ROOT',
17 apply_name => 'apply_ROOT',
18 apply_queue_table => 'rep_dest_queue_table',
19 apply_queue_name => 'rep_dest_queue',
20 apply_queue_user => null,
21 log_file => 'exp.log',
22 bi_directional => false,
23 include_ddl => true,
24 instantiation => dbms_streams_adm.instantiation_schema_network);
25 END;
26 /
BEGIN
ERROR at line 1:
ORA-23616: Failure in executing block 167 for script
4D2E52386C84C1CAE040A8C0FC015222
ORA-06512: at "SYS.DBMS_RECOVERABLE_SCRIPT", line 560
ORA-06512: at "SYS.DBMS_RECOVERABLE_SCRIPT", line 583
ORA-06512: at "SYS.DBMS_STREAMS_MT", line 7673
ORA-06512: at "SYS.DBMS_STREAMS_ADM", line 2606
ORA-06512: at "SYS.DBMS_STREAMS_ADM", line 2667
ORA-06512: at line 2
10 errors
SQL> select * from dba_recoverable_script_errors;
SCRIPT_ID BLOCK_NUM ERROR_NUMBER
ERROR_MESSAGE
ERROR_CRE
4D2E52386C84C1CAE040A8C0FC015222 167 -39001
ORA-39001: invalid argument value
ORA-06512: at "SYS.DBMS_RECO_SCRIPT_INVOK", line 130
ORA-06512: at "SYS.DBMS_STREAMS_RPC", line 447
14-MAY-08
I could not find much explanation on net.
pl. help in case it is already solved.

Hi,
we are implementing datavault on an existing 11g DB.The database is up and running fine , but DBCA shows this error when I am trying to configure datavault using DBCA.
I have created a spfile from the same pfile, and Db does not show any error while coming up or shutting down. The issue comes only while using DBCA. I shall try minimizing the parameters and try again.
Thanks
Pankaj

How to disable "This Connection is Untrusted" warning in firefox using shell or perl script running on Linux Platform

We have QA automation jobs that invoke user interface tests in Firefox running on a virtual Linux host.
My tests perform regression, but I'm held up because of the Firefox This Connection is Untrusted warning.
My current requirement is to ignore this connection untrusted warning, which comes up when accessing an HTTPS website and i want this to be disabled through either a shell or a Perl script.
I can do this manually using the steps below, but this will not work for my current problem since the virtual Linux hosts are created dynamically on submission of automation jobs.
Go to Tools > Options > Advanced "Tab"(?) > Encryption Tab Click the "Validation" button, and uncheck the checkbox for checking validity.
Is there any Perl or shell script that disables this certificate warning?

There might be an add on to accomplish this:
*[https://addons.mozilla.org/en-US/firefox/addon/skip-cert-error/ Skip Cert Error]
However if we cannot find a solution there might be another place for support:
*[https://support.mozilla.org/en-US/kb/where-go-developer-support Where to go for developer support]

DBA scripts run by cron job

We've got a development database on which we're working every day. We intend to set up a cron job to run about once a week to help in the maintainance & performance of the database.... analyzing tables, stuff like that. Does anybody have any suggestions as to what scripts it's useful to run to help keep things running smoothly?
We're using 9.0.1
Cheers
RT

We've got a development database on which we're working every day. We intend to set up a cron job to run about once a week to help in the maintainance & performance of the database.... analyzing tables, stuff like that. Does anybody have any suggestions as to what scripts it's useful to run to help keep things running smoothly?
We're using 9.0.1
Cheers
RT i'd suggest you try out oracle enterprise manager and look at the list of events you can test for. You can use this list to implement in cron or let OEM do it for you. You'll find test like, is the listener up, is the db up, is the server up, what tablespaces will not be able to extend, if a disk is getting fulletc and stuff like that . Those items should help you frame your scripts for cron if you like.

CS3 script runs slow with CS4 and CS5

I have written a table transformation script for InDesign CS3, which formats an imported Excel table.
With InDesign CS3 the script runs well. Now I tried the same script with InDesign CS4 and CS5 and it runs very slow. It's about 10 times slower than with CS3.
I tried to turn off redrawing, but this didn't help. It even got slower again!
Does someone has made similar experiences? Could you solve the performance issue?
Do scripts in CS4/CS5 generally run slower than in CS3?
Does CS4 differ so much to CS3 that the script runs 10 times slower?
What can I do to improve the execution performance?
Thanks for any tips / advices etc.

I now have made some tests with profile / timing. Here are the results.
you find the code snipped below. It iterates first over all rows and then over all cells inside of the row. In the cell iteration, the function hasGapInLineBelow(...) does more iterations.
The example is with a table of 42 rows and 9 cells.
I have compared CS3 and CS5
there are 3 test cases:
for 1/1 means: first for-loop is in iteration 1 and second for loop is in iteration 1 (statements for first row and first cell done)
for 1/9 means: first for-loop is in iteration 1 and second for loop is in iteration 9 (statements for first row and all 9 cells of the row done)
for 2/9 means: first for-loop is in iteration 2 and second for loop is in iteration 2 (statements for second row and all 9 cells of the row done)
it's strange that normal variable assignments take lot of time (like the statement startPos = indexLeftNeightbourOfCurrentCell;) -> I don't understand why this can be so time consuming!?!
it's also strange why in "for 1/9" and "for 2/9" variable assignments take much longer than in "for 1/1"...
could I use another data type than array for the variable isMergedRow? Which one?
do you know any performance optimizations?
in which time unit ExtendScript Toolkit shows the measured periods?
how are the times calculated in loops? Are these the times sumed up over all iterations or is it just the time for a single statement?

Safari Vulnerability - Test for script running

Similar Messages

Maybe you are looking for