Sale tax to edge up?

My phone is eligible to edge up. Will they still charge me sales tax on the full amount of the new phone?

Ljordan285 wrote:
They charged me sales tax on full price of four phones. That hurt!
Why would it hurt?
example
iPhone 6 full price $650 sales tax in my area 9.75% total sales tax=$63.38
iPhone 6 o upgrade $200 plus $30 upgrade fee=$230 sales tax=$22.43 + $30 upgrade fee=$52.43
So about $11 difference.

Similar Messages

Sales tax when edging up

When I bought my first phone on Edge I paid full price sales tax. When I want to Edge up, I have to pay 50% of the cost of the phone. At that point I'm charged first month (fine) and then sales tax again for the full price of the phone. Something doesn't seem right about that. Hoping someone can explain this to me.

When you buy a new car on credit you pay the full sales tax on the car, because the assumption is you expect you will keep the car. However, you do have the option at any point to trade in your car (whether paid in full or not), but the car dealership/state does not prorate the sales tax based on how much of the car you actually paid off. When you lease a car the assumption is that you do not wish to purchase the car, rather you only want to use it for a short period of time (ie a long term rental), though in most cases you have the option to buy the car if you want. Verizon Edge assumes you seek to purchase your phone rather than lease the phone.
Edge is simply a way for you to buy your phone on credit at 0% interest, you are not leasing your phone with the option to buy. In fact you are purchasing your phone with the option to trade it in later if you want new tech as soon as it is available. Verizon and all other carriers that have this type of program are trying to get us accustomed to purchasing our phones at full price. This way over time they can do away with most if not all phone subsidies.
If you were in fact leasing your phone, then Verizon would have placed a set of restrictions on your use of the phone that helped Verizon ensure that your phone when returned would be in like new condition and operational. In addition, if you were leasing the phone Verizon would likely require you to purchase insurance for the phone to further protect their interests regarding the leased equipment.
For those already in enrolled in the Edge Program be aware, in the fine print of the Edge Terms and conditions it states
What are the eligibility requirements to Edge Up with Verizon Edge?To be eligible to Edge Up, you must:
Back to top
Have had your Edge phone for at least 30 days
Have paid at least 50% of the full retail price of the phone
Return the Edge phone in good working condition with no significant damage, as determined by Verizon Wireless
What types of replacement phones will be accepted when I seek to Edge Up?When you Edge Up to a new Edge device, you must provide to Verizon Wireless one of the following in good working condition and without significant damage, as determined by Verizon Wireless:
The original phone purchased under your Verizon Edge Agreement
An authorized replacement from a valid Verizon Wireless channel (e.g., Certified Like-New Replacement, AppleCare® or a Verizon Wireless authorized insurance replacement phone)
All that means is that Verizon does not have to grant you the option to Edge up even if your phone is 50% paid off, if your phone is not in an acceptable trade-in condition. A person in that situation would still have to continue to pay the phone off but would not be eligible to purchase another phone on Edge until that contract is paid off in full. Just like if you trashed your car (only 50% paid) and when you went to trade it in the dealer determines it is not in a suitable condition to accept for trade in. You will be stuck with your car (or phone) and still be required to pay it off. In this case the dealer will (with acceptable credit check) let you finance a new car just like Verizon will allow you to add another line to you account and get a new phone on a separate Edge contract paying tax on the full retail cost of the phone.

Calculation of sales tax for free item

Dear SAP B1 Experts
I have query regarding sales tax calculation for free item .
For EG. I have two item for sales (A = 1000, B = 100)   Sales tax is VAT4%
But when i am doing sales, i am selling B for free of cost with A for Rs 1000/-
here my tax calculation is (1000 *4%) = 1040/-
but as per the govt sales tax rule, we are liable to pay the tax for free item as well
So I this case, In SAP B1 how we will calculate the tax 4% for free item .
Please help me.
Thanks

i have checked, its working okay, but
in Invoice print out unit price and line total is showing for free item. How i make the unite price 0 .
Tax only calculation is based on the Line total and the line total is based on the unit price.
in that case when i give the invoice to the customer.
It should show like this
Item A       100   * 10         1000
"    B           0   * 1              00
                                         1000
4% tax                               44
Doc Total             =           1044
thanks
Regards

Free Goods -Sales tax

Hi,
I am working on Free Goods determination.
The ultimate aim is to capture excise duty and sales tax for materials which is sold as free to customer.
I could able to capture excise duties,whereas it is not charged on customer.
I could able to sales tax,whereas it is t charged on customer.
Only problem i face is for item category TANN ,tax value should be zero (o) means at the time revenue account determination it should not post to customer account .How can i configure it.
I tried with various options but i could not make it.
I thought of generating report keeping in the mind that where ever the condition type R100 >0.01,system should find out the value for sales tax VAT /CST.
Based on that value credit note have to raised for customer.
Here in our case Rs 2.93/- should be issued as credit note.Is there any other alternative option available.
Thanks,
Pradeep M

We are using the below one.
IF komp-PSTYV = 'TANN' OR komp-PSTYV = 'RENN' .
     IF XKOMV-KSCHL = 'JIVP' OR XKOMV-KSCHL = 'ZCES' OR XKOMV-KSCHL = 'JIVC'.
       XKWERT = 0.
     ENDIF.
     IF XKOMV-KSCHL = 'ZBPF' OR XKOMV-KSCHL = 'R100'.
       XKOMV-KSTAT = 'X'.
     ENDIF.
ENDIF.
ZBPF is our basic price
Regards
Jobi

A/R Installment Payments with Sales Taxes and Freight in 1st payment

Our sales dept. wants to offer our customers Installment Payment plans (6, 12, 24 mths) for product sales which is easy enough to set up using Payment Terms and the Installment Payment flag.
But our Accounting Dept wants to collect the Sales Taxes and Freight "up front" in the first payment.
We do not want to use Milestone billing since Accounting wants to recognize the revenue of the sale during the month of the sale ... so a single Invoice to the customer with the Payment Plan printed on the invoice is the option they want done.
I have not been able to find any way to set up the Installment Plan configuration to do such a thing. The Terms of Payment refer to the total Invoice amount.
Has anyone here be able to accomplish such configuration (without doing custom coding in a User Exit)?
Example: $60,000 item, %5,000 tax, $100 frieght = $65,100 total invoice. (6 month payment plan)
   Payment #1 = $15,100
   Payment #2 = $10,000
   Payment #3 = $10,000
   Payment #4 = $10,000
   Payment #5 = $10,000
   Payment #6 = $10,000

I have already set up the installment plan in OBB9 with 6 entries (1 - 6) for my IP Payment Term of IPM1. I have the percentages setup as 16.67 for each of the installments and the last set at 16.65 (equaling 100%).
The problem with Sales Tax and Freight is that you can not simply assign an arbitrary percentage to the 1st installment (for example make the 1st installment 25% and break up the remaining 5 installments fromt he other 75%).
We need to make sure that the first Installment from the customer is for the Sales Tax, the Freight, and exactly 1/6 of the material cost (if it is a 6 month payment plan).
I have activated User Exit EXIT_SAPLV60B_007 to intercept table generation of the installment plan that is sent to Accounting to fix this problem. Now the Accounting document connected with the customer invoice is correct. My next step is to fix the SmartForm print of the Installment Plan on the customer's Invoice.

Conditions in Purchase Order - No scroll bar/Sales Tax value not in mmr

Hello,
I am stuck in a weird problem where I have created a Condition Calculation Schema, assigned it to Schema group and assigned that schema to vendor, but when i open my condition in the PO, it does not give me scroll bar i.e. I have calculation Schema with around 10+ conditions, but when I try to put all the conditions in PO at one time, the scroll bar doesnot come up and without it, I cannot view all my conditions in the PO. Its saving the conditions though as seen in report, but cannot display it in PO without the scroll bar. Any ideas?
Another assignment is that sales tax value and % should not increase the mmr value at time of GR, but when I do GR its adding the sales tax value to mmr value, my requirement is just Gross price be added to mmr, not sales tax value/%. I tried the Statistical checks in Calculation Schema, but to no vail, at GR the sales tax value is being added to the mmr record. Any ideas?
Lots of points awarded for answer/answers.
Any clue will help
Thank you/Afshad
Edited by: Afshad Irani on Jan 14, 2009 10:27 AM
Edited by: Afshad Irani on Jan 14, 2009 2:32 PM
Edited by: Afshad Irani on Jan 15, 2009 6:19 AM

Q Another assignment is that sales tax value and % should not increase the mmr value at time of GR.
Ans:
Dear Afshad,
Reference to your question, you need to do few settings in your Condition Type and Pricing Schema, if you need Sales Tax value & % not to include in your Material value.
1 - In SPRO, Check that in your condition type, Control data 2 tab, Accruals check box should not be selected.
2 - In your Calculation Schema, against your condition types for Sales Tax % and Sales Tax Value, select the check box for Manual & Statistics.
3 - Also in your Calculation Schema, you should not select any account key in AccKey (Account Key) and in Accruals colomns.
If any one of these setting is not defined, the valuation price for your material will be increased due to the fact that your settings for Condition type and Calculation Schema is allowing the same to hit the value of your material directly.
Hope it works for you.
Regards
Jibran

Need to change sales tax from point of sale to point of delivery

Hi all,
Recently the tax laws were changed such that sales tax is to be collected based on where the product will be delivered to (rather then where the product was sold from).
Briefly we are an agency with mulitiple divisions, and within those divisions several sales offices. Previously, a sales would be made from the sales office, and based on the tax rate for that division and sales office (county/city) the sales tax would be calculated.
Now we need to shift that so that a sales can still be made from a division/sales office, but the collected tax is based on where the product will be delivered to.
I'm sure there is a way to set this up, but I'm at a loss as to where to start.
One of teh options the customer suggested was to have a sales area set up with all the cities and tax codes in it. Then assign that sales area to each of the sales offices. Is this possible? Or do you have to have a separate sales area for each sales office?
I'm open to any suggestions you may have as I'm not very familiar with this side of SAP (sales distription and taxes).
Thanks in advance for your thoughts!
Laurie

Thanks Bill. As it turns out, we are in the US where jurisdiction is an option I guess so this procedure may not be needed. As I dig further it appears we are currently setup to use TAXUS procedure which utilizes tax codes - a limited number. But since the recent change, we may need to switch to TAXUSJ.
Does this ring a bell for anyone? If it is what we need to do, what need I be aware of that will change in the rest of the system?
Thanks for your answers so far!
Laurie

Excise invoice and sale tax applicable in consignment process

Hi,
How excise invoice and sale tax applicable in consignment process in below stages--
in consignment fill up,consignment issue,Return andpickup
Regards
Ishikesh

Hi,
You have to pass JV for 50 picked up items through J1IS. For this you have to create new subtransaction type type and accordingly maintain the G/L in the tax on goods movement settings for acoount determination node.
Regards,
Sagar Wairagade

Excise and Sales Tax/VAT related notes.

Hi,,
Can anyone provide me notes on Excise and Sales Tax/ VAT related issues(Pricing Proc/Condition Types/Sceanrios etc) at my mail id [email protected]
Regrds,
Binayak

Hi Pratap,
For free goods you have to pay excise duty, that is why i recommend you to follow a new pricing procedure, where the Price Condition type is statistical(to calculate excise) and give payer as self if the excise duty you would not get from customer,\
1.Create invoice and excise invoice.
2. If you don't want to to hit self(given in document header partner) create proforma and excise invoice
revert if you require any clarrification.
regards.

Error while executing sales tax report S_ALR_87012394

Hi,
I am getting the below error while executing the sales tax report S_ALR_87012394.
Infomration: I have maintained the tax jurisdiction code 9 digits initially.after that i have maintained with 10 digits
Tax jurisdiction LA0000000 has defective structure
Message no. FS790
Diagnosis
When calling the GET_JURISDICTION_LEVEL_TTXD function module, a tax jurisdiction code was transferred which does not correspond to the structure specified in the table.
Procedure
Check the calculation procedure for the company code and determine the respective tax jurisdiction length and structure in Customizing. Check that the tax jurisdiction code transferred corresponds to the tax jurisdiction length and structure.
kindly help me
Thanks
Supriya

check is there any notes which you have to apply to correct already posted entries with 9 digits. because of this its generating this error

Sales tax Diferential adjustments in credit/debit memo instead of F-02

Dear All
While creating Sales order we have maintained sales tax percentage instead of 4% we haved maintained 12%. and delivery and billin also been done. after all FI posting to AR we came to know that we have maintained sales tax % wrongly, Now we need to
rectify this sales tax enty only. Is it possible thoruh Creditt memo process and differential amount should be post to subsequest accounts automatically instead of adjusting though FI side manually. Kindly suggest me how we can rectify through SD flow
(both rectification entry for Sales tax and customer value adjustment)
Kindly do the needfull

Just for information, check following SAP Notes, these may assist you in understanding:
- Note 542862 - FAQ: Country Version India (CIN) General MM queries
- Note 952441 - CIN: General Clarifications for CIN - SD
- Note 535616 - FAQ: Country Version India (CIN) General SD queries
Also, refer following thread:
- Credit Memo for Tax
Thanks & Regards
JP

Unable to remove/change sales tax in sales order

Hi Sappers!!
I are unable to remove sales tax from a sales order. I have tried to update the sales order by clicking on Header>Conditions Tab>Update-->Double click on G to redetermine the taxes.
The sales order was entered the same day the Vertex record was input.
Appreciate your pointers and time!!

Hi,
If you want to remove the sales tax from sales order,
first of all goto FTXP, give the country, for which you want to change the tax code percentage, and give the tax code and press enter, there it will show existing the tax percentage for that condition type (say earlier it was 10%). Now you want to make it 0% then remove 10 and put it as 0 and save it.
Next goto condition record VK12 maintaine new tax percentage which you want to change. Like earlier 10% was there but you want to make it as 0%, then maintaine in VK12 tax condition record.
Now goto your sale order in change mode VA02, and update the procedure using G, then the new tax willbe reflected i.e., 0% will come.
Hope this is clear
Reward if helpful
Thanks
Praveen

How to or which table i can find Sales Tax Code in CRM

Hi,
I need to get Sales Tax Code(mwsk1) in BADI 'CRM_COND_COM_BADI'. if i use CRM_ORDER_READ( ET_PRIDOC) or CRM_PRIDOC_READ_OW it is going into endless loop. So i can't use these Function modules in CRM_COND_COM_BADI.
Can you help me table or any other way to get sales tax code of Pricing conditions that appear on the sales order in CRM.
Thanks,
Praveen

Hi,
try by getting header and item guid in et_pridoc->pric_cond.
Regards,
Padma.

Adding New Field Under Sales Tax/Service Tax Tab in XD01

Hi Experts,
I want to Add new Field in CIN Details under Sales Tax/Service Tax Tab.
Is it Possible to Add Field under Standard Tab.
Thanks & Regards,
Sandip Kokate

hello,
yes there are two ways:
1) change standard screen. (that's the bad one).
2) Use GuiXt tool which provides you with a possibility to add your custom objects into standard screens, change layout, visibility and so on.
http://www.****************/Tutorials/Others/GUIXT/Page1.htm
http://www.synactive.com/tutor_e/tutor.html
i had personally used this third party tool without license ( you will be able to use only basic commands. adding input fields is one of them). I think it is the best way to enhance old transactions which don't have appropriate BADi's, user exits and so on.
br,
dez_

Sales tax condition not picking in p.o

Dear gurus,
I am getting problem of sales tax . Its maintained in tax pricing procedure. I haver maintained condition record for the same in FV11. I am getting all other taxes only sales tax condition is not appering? can any 1 tell about this?

u check whether sales tax condition type is assigned in fvll correctly to the same tax code
u assign the conditon type in excise defaults ( spro>log gen> tax on goods mvmts>india> determine excise duty> maintain excise defaults
and also check the validity periods.
If PO date is not falling with in the validtiy periods then system will not pick the valuye
chris

Sale tax to edge up?

Similar Messages

Maybe you are looking for