Sales Area synchronization between CRM and ECC is not working

Dear Experts,
In CRM Customer master record we are maintaining Sales organization, Distribution Channel and Division (Sales Area) under Sales Area tab.
The Same Sales Area is downloaded from back-end ECC system.
when I create new customer in CRM, Sales Area data is not downloading to ECC system. I have maintained all settings but could not find why the problem is coming.
I request you to help me in resolving this issue.
Your suggestions will be highly appreciated.
Regards
Raghu ram

Hi Krishna,
Thnaks for response, Division Setting are maintained. Header Division Activated Checkbox selected.
We are not using service orgnisation
Still problem persist
Please help us in resolving the issue.
Regards
Raghu ram

Similar Messages

ITunes sharing between Mac and PC is not working

iTunes sharing between Mac and PC is not working. No shared music appears.
PC = Win XP SP3; 192.168.1.101
iTunes for Windows 6.0.4.2
Sharing enabled / Look for shared music enabled / Share entire library
Open and running on PC
Windows firewall has exceptions set to allow traffic on TCP 3689, UDP 5353
MAC = OS X 10.4.6; 192.168.1.100
iTunes for OS X 6.0.4(3)
Sharing enabled / Look for shared music enabled / Share entire library
Open and running on Mac
System Preferences | Sharing | Services
Personal file sharing - ON
Windows file sharing - ON
Printer sharing - ON
System Preferences | Sharing | Firewall
Personal file sharing - ON
Windows file sharing - ON
Printer sharing - ON
iTunes Music Sharing - ON (i.e., TCP 3689 open)
iPhoto Bonjour Sharing - ON
Network Time - ON
ROUTER = Linksys BEFSR41v4; Firmware 1.04.01; 192.168.1.1
Functioning as DHCP server
File sharing between Mac & PC works OK
BUT iTUNES MUSIC SHARING DOES NOT WORK IN EITHER DIRECTION
Shared music is not visible
Tried turning both firewalls OFF -- still nothing
Tried installing Bonjour for Windows -- still nothing
ANY suggestions? Please help. Thanks.
1.8 GHz PowerPC G5 Mac OS X (10.4.6)

Hi cbafiero,
It seems that the problem lies in your router. I'm not sure exactly what the issue is (I've just now discovered it myself), but after switching from a Linksys WRT54GX2 to a thrift store Netgear, my shared libraries appeared instantly. My gut is telling me that the Linksys routers are blocking the multicast traffic, which is stupid on Linksys's part, to filter traffic internally. I'll look more into the Netgear and see what it has that the Linksys doesn't (or vice versa).

What is the difference of customer master data between CRM and ECC

Dear all,
We are helping customer to evaluate using CRM or ECC to manage there customer master data, focusing on the benefit of using CRM system.
Can any one help to compare the difference between these two system?
some tips in my mind are:
1. CRM has a friendly user interface for user to adjust the layout, hide/display favourite information according to actuall req.
2. In CRM, user can change the field/assignment block description easilly
3. in CRM7.0, user can add new customzing field easilly via AET
4. CRM has a good any analysis platform to provide pie chart analytic
5. CRM store more customer infor. than ECC, such as Marketing attribute, account classfication...anything else?
any other benefit to use CRM for customer master data? Pls help!!!
Thanks very much!!
BR,
Hedy

I would agree with most of the topics you mentioned. Just one remark to topic number 5. Business partner doesn't have more data than erp. It has some more marketing oriented data, but on other hand doesn't have all finincial and credit data that are relevant for erp financial transactions.
In our company we have the following scenario: all business partners are created in crm (because there the sales activities are started and because we don' clasify at the begining all partners as customers but as prospects. and of course it has nicer user interface). but when we are closing the deals (ordreds are transfered to erp), we fill some additional (financial) data of that partner on erp side and clasify partners as customers.
Regards.

Interconnection between HP and Cisco is not working

Dear all,
I support some old colleagues by connecting a Cisco 2960x with an HP Switch. Both sides are UP/UP, stp is fine, channel also. The Cisco switch is also fine. But not data traffic is working.
I see that we are sending but not receicing any packet. the same on the other side. We checked the cabeling use different fibers, etc. everything is fine. when we connect a copper port, its also fine. Online on the LWL side we have this problem. But interface and line protocol is UP.
Is there any command I may not know to check the LWL. UDLD is not working because we have just on cisco on one end. test tdr works only on copper. I guess there is something wrong with the compatibility between the both Gbics, but i can't exaclty say what it is. We use monomode and LX Gbic.
On another Core Switch HP/Cisco is working finde with SX.
I don't have live access, so sorry for any delay in my answer.
regards,
Sebastian

Hi cbafiero,
It seems that the problem lies in your router. I'm not sure exactly what the issue is (I've just now discovered it myself), but after switching from a Linksys WRT54GX2 to a thrift store Netgear, my shared libraries appeared instantly. My gut is telling me that the Linksys routers are blocking the multicast traffic, which is stupid on Linksys's part, to filter traffic internally. I'll look more into the Netgear and see what it has that the Linksys doesn't (or vice versa).

Flowcontrol between 3560 and 2950 does not work?

Configuration:
==============
C3560 Software (C3560-IPBASEK9-M), Version 12.2(25)SEB1, RELEASE SOFTWARE (fc1)
interface GigabitEthernet0/3
description R14 Trunk 50,[100],102,105,199
switchport mode trunk
switchport nonegotiate
flowcontrol receive on
end
connected to
============
C2950 Software (C2950-I6K2L2Q4-M), Version 12.1(22)EA6, RELEASE SOFTWARE (fc1)
interface GigabitEthernet0/1
description R01 Trunk 50,[100],102,105,199
switchport mode trunk
switchport nonegotiate
flowcontrol receive on
flowcontrol send on
end
Port Gi0/1 on 2950 has sometimes no buffer and drops packets:
============================================================
GigabitEthernet0/1 is up, line protocol is up (connected)
Full-duplex, 1000Mb/s, media type is RJ45
input flow-control is on, output flow-control is on
193421146 packets input, 2844802437 bytes, 2637 no buffer
0 input errors, 0 CRC, 0 frame, 0 overrun, 2637 ignored
but it never sends a pause packet:
==================================
cs-a2p5#sh flowcontrol
Port Send FlowControl Receive FlowControl RxPause TxPause
admin oper admin oper
Gi0/1 on on on on 0 0
What am I doing wrong? I have realized that this data overload is caused by
server with 1Gbs interface pushing data to server with 100 Mbs interface.
I vould expect it should not affect a trunk with flowcontrol on.
Tomas

By wild guess, is the flowcontrol also enabled at the interface to / at both servers ? If there is only flowcontrol between switches but no flowcontrol at servers then it may create the problem. Please advise more.
Moreover, if you transmit 10 times of traffic to a receiver that it can handle, there may be packet drop and flowcontrol to ask for retransmittion.

HDMI CABLE BETWEEN LAPTOP AND TV WILL NOT WORK HELPPLEASE!!

I wanted to watch hockey from my laptop on the tv but i get nothing when i hook the cable. Is there something that has to be set or turned on??
I bought the computer about a year ago so it is not old. The computer is a; Dell Inspiron 1525 and the TV is a; Visio 42 inch
Any help will make me happy, Thank you, Mike {Removed per Forum Guidelines}

Majority of laptops are going to have a default setting of outputting video just to the display. You actually have to tell the laptop to display images out of the HDMI rather than it's screen. This is usually done by holding the "Function Key" down and cycling thru the video output options. The "function" or "fn" key can be located in the lower left hand portion of your keyboard next to the "ctrl" button your video options are typically worked in with your F1 - F12 bottons at the top of your keyboard. Your "FN" key will most likely be a different color than the rest of the keyboard hold this down while searching for your video output key (once again in you F1 - F12 keys) it will have a monitor logo that should be the same color as the "FN" key. Keep holding the "FN" key down and tap the video output key to cycle thru all the options until you find the right one.
.-**Click the star under my name if this information helped! TY!**-.
.-**Click the Solved button if this answered your question!**-.

Airdrop between Mac and iOS does not work

I am using a MBP (early 2011) OS X 10.10 and a iPhone 5s iOS 8.0.2 and I cant get a airdrop connection between them. Same WiFi and Bluetooth is on.
I bet my MBP is too old and does not support some kind of Bluetooth standard....correct? Thanks in advance for your help.

Hey guys,
Just wanted to put my 2 cents in and say that using my iPhone 5S and MacbookPro Early 2011 I was able to use both the SMS relay feature and the Phone call receive feature. So I'm not sure where the line is drawn for certain continuity features. I haven't had any handoff features work yet which I don't expect to happen since seamlessly moving something like a Pages files to different devices to continue working on would suggest the need for efficient Bluetooth 4.0 capabilities.
I'm really surprised that they limited the Airdrop from iOS to OS X to the 2012 or older mac models. I mean the bluetooth hardware in the iPhone should be backwards compatible so I see no reason why it couldn't be done between older macs that supported the mac-to-mac feature but didn't have Bluetooth 4.0. just means ill be using the instashare app to take its place... hopefully hey update with some iOS 8 extensibility features, that would make it a perfect solution.

Raw images are rendering dark green, and Raw FT not working

Upon loading Raw files from a Canon T5i into Aperture, the previews, when re-rendered by Aperture, turn a dark greenish hue. I've verified that the Digital Camera Raw software is up to date and my Camera is supported.
The second issue is that when I select "Raw Fine Tuning" from the "add adjustment" menu, nothing happens. The dialogue does not appear, and the RFT line does not get a bullet in the drop-down list.
I've recently installed Aperture 3.5.1 on a new machine, and haven't had this problem on the previous one.
Any help will be very much appreciated! Thanks.

As one test, please select one of these photos, in Adjustments click on Effects, then White Balance, and choose Auto. What happens?
Ernie

CRM and ECC 6.0

Hi Gurus,
Can any one tell me the difference in functionalities between crm and ecc 6.0?
Or ecc6.0 is integrated with crm?
What all functionalities of crm can be configured through ecc 6.0?
Whether we require a seperate crm system like the R/3 4.7 and connect it through the middleware
Please suggest at the earliest
Thanks in advance
Ajay

Hi Ajay,
This question could have saved us all this efforts
Btw, opportunity management is used to capture the potential customers info. It helps to capture the buying pattern, the source from which this opportunity is captured, the probability of winning the order. Also we can maintain the various stages of Oppoprtunity and the activities that need to be performed in each phase. You can also maintain the competitor info in opportunity.
Also if you are using PCUI, the opportunity created in CRM5.0 using PCUI can be created as Sales Quotation in ECC.
The opportunity is not replicated in ECC otherwise.
The opportunity can be then followed up by sales order which can then be replicated into ECC.
More info is available on http://help.sap.com/saphelp_crm50/helpdata/en/5b/60c565c63d5a4d8200472b6008eb92/frameset.htm
Hope this will help
Regards,
Rekha Dadwal
<b>
You gain a point for every point that you reward. So reward helpful answers generously</b>

Steps involved in setting up communication between CRM and R3 / ECC

Hi all,
Can you please tell what are the steps involved in setting up communication between CRM and R3 or ECC.
I know that initially logical systems, RFC connections and other technical settings need to be done by Basis consultants.
From a functional consultants viewpoint, what all config settings need to be done so that data transfer between the systems can take place?
Thanks in advance.

Hi,
There are a series of steps that are to be done...
These include creating sites and subscription in CRM, setting up filters, and number ranges....
All these are in the connectivity guide C71 and replication guide B09.
Refer C71 first and then B09. These would suffice.
You can get these both in the follwoing reference:
http://help.sap.com/bp_crmv340/CRM_DE/index.htm
If you dont get, then gimme your email id, i shall forward these docs to you.
Kindly reward with points in case helpful
Sharif.

Sales Office, Sales group and Sales Area table of CRM BP

Hello Experts
Please give me the table name where i will get the sales office, sales group and sales area of the CRM Business Partner.
Any pointers.
Regards
DJ

Hi Jamal,
You may use table CRMD_ORGMAN
Regards,
Shaili
Edited by: shailip on Aug 26, 2009 7:44 AM

Need to transfer field KLABC (ABC Classification) between CRM and R/3

Hello Group,
We plan to make the R/3 field KLABC (ABC Classification) of a customer (R/3 Table KNVV, Attribute KLABC) available in SAP CRM under Customer's sales area data. It should also be maintainable in SAP CRM.
After some analysis we found out, that this field also exists in SAP CRM (Table SMOKNVV, Attribute KLABC) but it is not replicated between CRM and R/3 (and vice versa). Also this field is not displayed in SAP GUI as well as not in the PCUI.
Now we are analyzing the two options:
1) Make KLABC from table SMOKNVV available in SAP CRM (and PCUI) for maintenance and extend the Middleware to enable the replication of KLABC between CRM and R/3
2) Extend the customers sales area data in CRM (PCUI) by a new attribute ZKLABC and extend the Middleware to enable replication between R/3 KLABC and the newly created ABC attribute in CRM
We have the following questions:
- What would be the better & easier approach ? Any recommendation or comment is highly appreciated.
- If we choose option 2, to what extend would the SAP CRM Easy Enhancement Workbench (EEWB) support this development (Is it possible to extend the business partners sales area data with EEWB ? Does the EEWB also extend BDocs if you add new fields to Business Partner tables ?)
Background Information:
We have SAP CRM 4.0 SP8, R/3 4.7 and SAP Enterprise Portal 6.0
Thanks a lot for help,
Erik

Hello Frédéric,
no, I do not have the middleware enhancement guide. Do you have it electronically and could send it to me erikmueller (at) gmx.de ?
In CRM would make the field KLABC from table SMOKNVV available in PCUI? Or would you use the Easy Enhancement Workbench to introduce a new field?
Either way I the middleware would need to be enhanced, but I would like to understand what is easier in CRM to have the field available in PCUI.
Thanks for the info.
Regards,
Erik

How does the integration between CRM and SD occur

How does the integration between CRM and SD occur? Is only via ALE and are there config steps in CRM to ensure the correct data mapping between CRM and SD?
So, if I create an order or quote in CRM how is it then created in SD? Or do they share the same data store.
thanks

Hi John,
Here is good documentation regarding Data Exchange for Sales Transactions: the CRM Enterprise and the ERP System are two different repositories, If you create the Sales Order in CRM then they will be replicated into SD (using CRM Middleware, BDoc's)
http://help.sap.com/saphelp_crm60/helpdata/en/52/2d0c38941e5666e10000009b38f8cf/frameset.htm
Also you can check the best practice guide for CRM 2007 there you have plenty of information
http://help.sap.com/bp_crmv12007/CRM_DE/HTML/index.htm
Hope this help,
Regards,
Ramon

Any SAP Note for RFC Error between BI and ECC 5.0

Hi..
the RFC Destination between BI and ECC 5.0 is giving errors.
Plz let me know if there is any Support pack or any solution to fix this error.
thanks..

Hi,
pls find the RFC connection details
1 Prerequisites
1.1 User Roles
Use
With the Building Block Connectivity a configuration role for each component is provided to access all transactions relevant for the installation. The following roles are available:
Technical name Description File name for upload
B02_01C B02 - Connectivity Configuration Role (SAP R/3) B02_01C.SAP
B02_03C B02 - Connectivity Configuration Role (SAP BW) B02_03C.SAP
C71_04C B02 - Connectivity Configuration Role (SAP CRM) C71_04C.SAP
B02_04C_SRM B02 - Connectivity Configuration Role (SAP SRM) B02_04C_SRM.SAP
Procedure
Please upload the necessary roles and add them to your user, using transactions PFCG (Role Maintenance).
2 Local Settings
This chapter describes all local settings that are necessary for each component like SAP R/3, SAP SCM, SAP BW, SAP CRM or SAP SRM.
2.1 SAP R/3
2.1.1 Define Client Administration (SAP R/3)
Use
This activity allows you to change Customizing settings.
Prerequisites
You have logged on to the system in English in order to start with the installation of the Best Practices Scenario.
Procedure
Run the following activity:
SAP R/3 Role Menu Define Client Administration (SAP R/3)
Transaction Code SCC4
SAP R/3 Menu Tools  Administration  Administration  Client Administration  Client Maintenance
Then carry out the following steps:
1. Choose Display  Change.
2. Confirm the warning message Caution: The table is cross client.
3. Select your SAP R/3 client and choose Details.
4. In the Change View Clients: Details screen, activate the following settings:
u2022 Automatic recording of changes
u2022 Changes to Repository and cross-client Customizing allowed
u2022 eCATT and CATT allowed.
5. Save.
6. Go back to the SAP Easy Access menu.
2.1.2 Defining a Logical System for SAP R/3 (SAP R/3)
Use
The purpose of this activity is to create a logical system for your SAP R/3 System. To enable communication between systems within your system landscape, you must
1. Define the systems as logical systems.
2. Assign the logical system for the SAP R/3 System to a client.
This enables the systems to recognize the target system as an RFC destination. If the logical system has already been created, skip this activity.
Logical systems are defined cross-client.
Procedure
Carry out the following steps:
1. Access the transaction using:
SAP R/3 Role Menu Defining a Logical System for SAP R/3 (SAP R/3)
Transaction Code SPRO
SAP R/3
IMG Menu Basis Components (for R/3 Enterprisse: SAP Web Application Server)  Application Link Enabling (ALE)  Sending and Receiving Systems  Logical systems  Define Logical System
2. Choose New entries.
3. In the column Log System, enter a name for the logical system that you want to create.
4. In the column Name, enter a description of the logical system.
Log. System Name
where XXX is the system name
and NNN is the client.
5. Save your entries.
A transport request for Workbench appears.
6. Select an existing request or create a new request, if necessary.
A transport request for Customizing appears.
7. Select an existing request or create a new request, if necessary.
2.1.3 Assigning Logical System to Client
Use
The purpose of this activity is to make an assignment for the logical system. Skip this activity if a logical system is already assigned to your client.
Procedure
Carry out the following steps:
1. Access the transaction using:
SAP R/3 Role Menu Assign Logical System to Client
Transaction Code SCC4
SAP R/3 Menu Tools  Administration  Administration  Client Administration  Client Maintenance
2. Choose Display ® Change.
3. Confirm the warning message The table is cross client.
4. Select your R/3 client and choose Details.
5. Enter the name of the logical system of your SAP R/3 client.
6. Save and confirm the warning message Be careful when changing the logical system.
7. Choose Back twice.
2.1.4 Creating an RFC User (SAP R/3)
Use
To enable communication between the SAP R/3 back-end system and the SAP SCM System, you have to create an RFC user in the SAP R/3 System.
The RFC user in the application client enables multiple RFC connections. Skip this activity if an RFC User has already been created.
Procedure
Carry out the following steps:
1. Access the transaction using:
SAP R/3 Role Menu Creating an RFC User (SAP R/3)
Transaction Code SU01
SAP R/3 Menu Tools  Administration  User Maintenance  Users
2. In the User field, enter RFCUSER.
3. Choose Create.
4. On the Maintain User screen, enter the following data on the Tab entry screens:
Address
Last Name
Function
Logon data
User type System
Password LOGIN
Profile
Profiles SAP_ALL
SAP_NEW
S_BI-WX_RFC
Defaults
Logon Language EN
5. Save your entries.
2.3 SAP BW
2.3.1 Define Client Administration
Use
This activity defines changes and transports of the client-dependent and client-independent objects.
Procedure
1. To perform this activity, choose one of the following navigation options:
SAP BW Role Menu Local Settings ® Define Client Administration
Transaction Code SCC4
SAP BW Menu Tools  Administration  Administration  Client Administration  Client Maintenance
2. Switch to change mode.
3. Select your client.
4. Choose details.
5. In field Currency enter the ISO-code of the local currency, e.g. USD or EUR.
6. In field Client Role enter Customizing
7. Check the settings for changes and transport of client-specific objects and client-independent object changes
If you want to use the settings made by BC-Sets or manually in other systems (other than BW), u201CAutomatic recording of changesu201D and u201CChanges to Repository object and cross-client Customizing allowedu201D is required.
Result
Client administration has been defined to support the installation using Best Practices.
2.3.2 Defining a Logical System for SAP BW (SAP BW)
Use
In this step, you define the logical systems in your distributed system.
Prerequisites
Logical systems are defined cross-client. Therefore cross-client customizing must be allowed in your client (this can be checked in transaction SCC4).
Procedure
To carry out the activity, choose one of the following navigation options:
SAP BW Role Menu Defining a Logical System for SAP BW (SAP BW)
Transaction Code SPRO
IMG Menu SAP Reference IMG  SAP Customizing Implementation Guide  SAP NetWeaver  Business Information Warehouse  Links to other Systems  General Connection Settings  Define Logical System
1. A dialog box informs you that the table is cross-client. Choose Continue.
2. On the Change View u201CLogical Systemsu201D: Overview screen, choose New entries.
3. On the New Entries: Overview of Added Entries screen enter the following data:
Field name Description R/O/C User action and values Note
Log. System Technical Name of the Logical System Enter a name for the logical BW system that you want to create
Name Textual Description of the Logical System Enter a clear description for the logical BW system
4. Choose Save.
If a transport request for workbench and customizing is displayed choose existing requests or create new requests.
If you want to continue with the next activity, do not leave the transaction.
Result
You have created a Logical System Name for your SAP BW client.
2.3.3 Assigning Logical System to Client (SAP BW)
Procedure
To carry out the activity, choose one of the following navigation options:
SAP BW
Role Menu Assigning Logical System to Client (SAP BW)
Transaction Code SCC4
SAP BW Menu Tools  Administration  Administration  Client Administration  Client Maintenance
1. In the view Display View "Clients": Overview, choose Display.  Change
2. Confirm the message.
3. Select your BW client.
4. Choose Details.
5. In the view Change View "Clients": Details, insert your BW system in the Logical system field, for example, BS7CLNT100.
6. Save the entries and go back.
2.3.4 Opening Administrator Workbench
Procedure
To carry out the activity, choose one of the following navigation options
SAP BW Modeling  Administrator Workbench: Modeling
Transaction Code RSA1
1. In the Replicate Metadata dialog box, choose Only Activate.
2. If a message appears that you are only authorized to work in client ... (Brain 009) refer to SAP Note 316923 (do not import the support package, but use the description under section Workaround).
2.3.5 Creating an RFC-User (SAP BW)
Procedure
To carry out the activity, choose one of the following navigation options:
SAP BW Role Menu Creating RFC User
Transaction Code SU01
SAP BW Menu Tools  Administration  User Maintenance  Users
Then carry out the following steps:
1. On the User Maintenance: Initial Screen screen:
a. Enter the following data:
Field Entry
User RFCUSER
b. Choose Create.
2. On the Maintain User screen:
a. Choose the Address tab.
b. Enter the following data:
Field Entry
Last Name RFCUSER
Function Default-User for RFC connection
c. Choose the Logon data tab.
d. Enter the following data:
Field Entry
Password LOGIN
User type System
e. Choose the Profiles tab.
f. Enter the following data:
Field Entry
Profiles SAP_ALL , SAP_NEW and S_BI-WHM_RFC
g. Choose Save.
Do not change the password of this user as it is used in RFC connections.
2.3.6 Define RFC-USER as default (SAP BW)
Procedure
To carry out the activity, choose one of the following navigation options
SAP BW Role Menu Define RFC-USER as default (SAP BW)
Transaction Code RSA1
SAP BW Menu Modeling  Administrator Workbench: Modeling
1. On the Administrator Workbench: Modeling screen choose Settings  Global Settings.
2. In the Global Settings/Customizing dialog box choose Glob. Settings.
3. On the Display View u201CRSADMINA Maintenance Viewu201D: Details screen:
a. Choose Display  Change.
b. Enter RFCUSER in the BW User ALE field.
c. Choose Save.
Hope this helps in solving u r problem
Regards
Ramakrishna Kamurthy

Maintain Structured Product in CRM and ECC

Dear expert,
For structured product, i have folowing questiones. Could you pls kindly help on it:
1) Structured product can be maintained in both CRM and ECC, right?
2) If i matain in CRM, how can i download it to ECC?
3)how to maintain it in ECC?
4)if i maintain it in ECC, how to download it to CRM?
Thanks!!
Hedy

Arun,
In CRM the sales organization is an organizational unit object that has an attribute that corresponds to the 4 digit sales organization code in ERP. This is also true for purchasing organizations which are organizational units that have ERP purchase org code as an attribute.
So to do this you need to translate the organizational unit number based on the attributes of that organizational unit(sales or purchasing).
Take care,
Stephen

Sales Area synchronization between CRM and ECC is not working

Similar Messages

Maybe you are looking for