Sales order minimum value issue

Hello,
Could you please provide some inforamtion regarding the sales order minimum value infoarmtion like where we can maintain that value?
Regards|ksr

hi
You can specify a minimum order value for sales order processing. The following example illustrates how this function is used:
You specify a minimum order value of USD 200.
During sales order processing, the net value (after discounts and freight, before taxes) of an incoming order is USD 190.08.
During pricing, the system determines that the net value falls below the minimum order value and calculates a minimum-order-value surcharge. In this example, the surcharge equals USD 9.92.
The minimum order value and the surcharge appear as separate lines in the pricing screen. The minimum value is for information purposes only, and does not affect pricing. The system automatically adjusts the net value of the order (before taxes) to the minimum value allowed.
If you use minimum-order-value requirements, you must create condition records for condition type AMIW. In these condition records, you specify customers and the corresponding minimum order values. During pricing, the system automatically uses these condition records as a reference for determining the relevant minimum order surcharges (condition type AMIZ). In the standard version, condition type AMIZ refers to AMIW. This means that the system automatically calculates values for AMIZ conditions; you do not need to create separate condition records.
You may want to specify minimum order values by sales organization or division instead of by customer. In order to do this, your system administrator must define a new condition table with the appropriate fields in the table key. The condition table can then be included in the access sequence for condition type AMIW.

Similar Messages

  • How to summarize Open sales order credit value

    Hi, friends.
    I am designing Add-on report about credit exposure.
    I found the relevant tables of Credit Limit in FD32
    KNKK
    S066
    S067
    Then, I would like to show the document details of open sales order credit value in the report.
    I tried to summarize the open sales order amount from VBAK, VAUK, VBAP, VBUP.
    However, it doest match to the amount in S066 table.
    Can anyone tell us how to summarize Open sales order credit value from SD documents?
    Regards,
    Yu

    Sudheer,
    You need to check the update rule given in the definition of the Credit control Area which you are using for credit management. If you want only the open deliveries then you need to have update rule 15 in the credit control area.
    In the credit controal settings, you need to have settings for the credit check at the delivery level.
    Hope this will solve your issue.
    Regards,
    Chetan
    Edited by: Chetan Gupte on Jul 15, 2010 8:56 PM

  • Open Sales Order quantity & value

    Hi,
    We have a requirement here of report to show open sales order quantity & value for any month (monthend). There is a datasource 2LIS_11_V_ITM which gives Open order quantity. I have created an ODS with 2LIS_11_VAITM & 2LIS_11_V_ITM which can give me desired qty & value, but only for date of last data upload and not for date in the past.(and to get that, I have to sumup all open orders quantity without using any date filter)
    I am thinking of creating a Infocube over this ODS to update the Open Order qty & value at the monthend (Snapshot scenario). But to update this, I am not able to get the logic for date to be used in time dimension.
    If anyone can think of the solution or any alternate way to develop this kind of report, your help/suggestions are most welcome.
    Thanks,
    Vikram.

    Hi Vikram,
    Find the link, which solves u r requirement
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/bi/arobustdesignofopensalesorderdataflow
    Thanks & Regards
    Ramakrishna Kamurthy

  • Open sales order credit value (S066-OEIKW)

    Hello experts,
    I need to update the table S066 with the Open sales order credit value when an item has no confirmed quantity (VBEP-BMENG). So I have created the new rountine under
    VOFM -> Requirements -> Credit checks -> new include RVKMP901. But I don't know how to update this table.
    From the note 377165, the same is explained. But I am niot able to achieve my requirement.
    So please help me in this regard.
    Waiting for your reply.
    Any Suggestion...
    With regards,
    Vasanth M
    Edited by: Vasanth M on Feb 15, 2010 8:21 PM

    Hello Jack,
    Thanks fo your answer. But I have to update the credit amount to the table S066.
    This credit limit could be viewed in the TC FD33. So please suggest me what to do.
    Thanks in Advance
    Best Regards,
    Vasanth M

  • BOM not exploding in Sales order & Net Value error

    Hello Dear all,
    I have created a product "A" with BOM items 10, 20 & 30.
    Item cat. Gr for "A" is ERLA & for 10, 20 & 30 is LUMF.
    I have also created BOM with these 3 matls. (ie 10, 20 & 30).
    When processing Sales Order Item cat. appeared in SO for "A" is TAP & for other 3 is TAN. "A" shows the price maintained for it, but not showing Net Value at Header level data in SO.
    Also document is incomplete because of Net value for Items 10, 20 & 30.
    I don?t want price of 10, 20 & 30 should display in SO at Item level
    Can anyone suggest the required setting?
    Thanks
    Shan

    hi,
    For BOM mainly two material groups are used.
    LUMF and ERLA.
    If you used ERLA in the main material which consists of different materials then the pricing would be carried out only for the main item, while the other sub items pricing would not be displayed.
    while if you use LUMF then the main material would not be priced but only the sub items would be relevant for pricing the the total of all the sub items forms the basis of the sales order net value.
    regarding the net value error you can just check the pricing configuration for the steps and sub total.
    regards,
    Siddharth.
    Edited by: SD on Mar 11, 2008 7:51 AM

  • Sales order net value and invoice net value differ

    Hi Gurus,
    i placed  sale order 03/08/2009 the net value of the order is 30000 USD, the same day i have done some price modification (manually i entered the header condition with value of 50 USD) after entering the header condition sales order net values is showing 50 USD. then delivered and invoiced. in the invoice net value is showing 30000 USD. my requirement is the invoice also has to show the 50 USD only. why it is not showing the sales order net value? is there any setting need to be done  regarding this problem?
    Thanks in advance

    i changed the pricing type as D
    From your comments, I presume in copy control, a different alpha value would have been maintained and with that settings, sale order, delivery and billing were generated.
    What I would suggest you is that you create a sale order once again for the same customer and 5 materials, make same changes in pricing, do PGI and billing.  See how it works.
    thanks
    G. Lakshmipathi

  • Sales order net value

    How and where the sales order net value will be communicate with credit management as a open order value?

    Hi Gopalal.,
                          The subtotal field A is related with credit managemnt in Pricing,In pricing if we want to caliculate the credit limit on only PR00 you can set subtotal A immediatly after A,If you want to caliculate Credit limit after dicounts then Subtotal A should be placed after discounts,
    So Subtotal A is nothing but the values of the pricing are stored in A field which compares the credit limit in sales order
    IMPORTANT thing is credit limit gets updated with the help Of INfo structure SO66 in OMO1
    REWARD if helpfull
    Thanks & Regards
    Narayana

  • DP91(RRB) Restrict DMR Billing value to Sales Order Net Value

    Hi Experts,
    My Requirement is, while creating a DMR using transaction DP91 (Resource Related Billing), I need to  restrict the DMR value to the sales order Net Value. i.e If there are already billed DMR'S we should check all the billing documents value, sum it up with present DP91 billing value (Say X). Check it against Sales order net value.
    IF Sales order net value is more than already billed value or to be billed value(X), then optimize the DIP items within available billing value (Planning to use bin packing algorithm) and postpone remaining items for next billing cycle.
    If Sales order net value is less than already billed value or to be billed value(X), postpone all DIP items for next billing cycle ie dont allow any billing.
    I found the Enhancement AD010007 Change DI Processing Information (EXIT_SAPLAD15_015). But it triggers for each item and here sales order related data is not available neither all DIP item data. All DIP data is flowing from WBS assigned in Sales Order item into DP91.
    Regards,
    Mahesh

    Hi,
    You can make use of data transfer routines in copy control from billing document to sales document.
    Data transfer routine - 403 (FV45C403) is used for copying billing plan dates from from a reference billing document into the target document.  This routine can be assigned to the FPLA copy rules for the item category from a billing document to a sales document.
    You may enhance this routine to add net value field to be copied into credit memo document. In your case, net amount (100) can be pulled from invoice into credit memo document. 
    Regards,
    Vaibhav

  • Can I use the customer requirement number as sales order in 'Goods issue MB

    Can I use the customer requirement number as sales order in 'Goods issue MB1A'?
    Thanks,
    Tiger

    Why I used the customer requirement in MB1A as the sales order, Update was terminated.
    Thanks,
    Tiger

  • Sales orders with credit issues taking availability stock

    Hi,
    I am doing confirmation using Global ATP in APO. The confirmation is well done, but the confirmed quantity for sales orders with clients that have credit issues is taken the available sotck for other sales orders with ok clients that I want to confirm the quantity they ordered.
    For example:
    Stock: 10 PC
    Client A order 15 PC and 10 are confirmed, but the ordered is retained becuse of credit issues with client A.
    Then client B order 3 PC, but nothing is confirmed because the ordered for client A is reserving the stock (note: this would be ok if client A had not credit issues).
    So, I want that the 3 PC for client B are confirmed and the 10 PC not reserved for the cient A while client A has credit issues.
    How could I configured, so that the orders with credit issues do not reserve stock for the incoming orders?
    Thanks a lot.

    Hi DB49,
    thanks for the quick answer.
    I checked the configuration in the R3 and seems to be fine. To prove it, I disconnect APO and did the availability check in the R3 system and it is working fine; the orders quantities that are blocked because of credit issues, do not reserve stock for incoming orders.........son new incoming orders are well confirmed.
    But after connecting APO the problem continues. I checked the next points.
    In R3 transaction CO09: takes to the APO screen and you see the ATP available quantity OK (do not consider the quantities of the credit issues orders). But at the moment that you make the order (VA01) it does not confirm any stock and if you select the line and go to the ATP screen (the same you get from the CO09) the quantities of credit issues orders are taken into account..the ATP availability quantity changes from the first going directly from the CO09.
    What could it be?
    Note: it was working fine with APO, I started to have the issue after implementing note 1262475 in APO. This note was becuase the BAPI_APOATP_CHECK was not brigning any value for the ATPQTY_***.
    Thanks a lot!!!

  • Sales Order stock upload issue

    Hello all,
    during cutvoer we have uploaded sales order stock with 561E and then performed a revaluation with MR21 in order for the stock to have value. In 80% of the items that worked fine except some cases that when MR21 is performed the value doesnt change. When attempt to perform MR21 the current proposed value is correct but the total stock value is shown as zero.
    Any ideas why this occured and any way to resolve the issue.
    Any help is greatly appreciated

    HI
    Do you have sales order stock for the 20 percent items that failed....MR21 changes the price of a material and Sales order stock is generally updated with the values influenced by the sales order prices
    Regards
    Virender Singh

  • Sale Order Excise Value should not be zero

    Dear Friends
    With the User Exit MV45AFZZ     Form:: Userexit_Save_Document_Prepare,
    we have written a condition that while saving the sale order, if the excise condition value JEX2 is zero, order could not be saved and this is working fine for normal process.
    But in some cases, we need to explode the BOM in sale order.  In this case, the above user exit is checking for components excise value which should not be the case. In fact, we tried to distinguish with item category for the above exit but the item category structures are not flowing in a particular area of user exit.
    My requirement is that for BOM exploded items, the above condition should not trigger for excise value in sale order.  It should trigger ONLY for Header Material.  How this should be achieved??
    thanks
    G. Lakshmipathi

    The problem is solved.
    Actually in the above user exit, we had looped thru' xvbap for the item category type NOT equal to 'Order Type'.
    Then, we read the xkomv table with two keys  JEX2 and POSNV ( referring to vbap-posnr) and checked if condition value is null, if so trigger the error message.
    In this way, though the xvbap is not dynamic in that form of userexit, the reading of xkomv helped to achieve
    our purpose of triggering the error for header materials.
    thanks
    G. Lakshmipathi

  • IN which table stores the Value of sales orders Net Value

    IN which table stores the Value of sales orders Net Value

    Hi Lakshmi,
    Check Following Tables:
    CRMD_PRICING_I
    CRMM_PR_SALESA
    CNCCRMPRSAP00090
    Reward Points if Helpful.
    Srini.

  • Freight to be calculated based on sales order net value

    Hello Experts,
    We have got a scenario,
    The net value of the sales order is 1194, 13 Euro, the customer has to pay
    6,40 Euro freight costs one time for this order. If we donu2019t deliver all items based on backorder or something else, the customer has not to pay for the additional delivery.
    These are the general terms and conditions.
    The system charges for the additional delivery the freight costs once again
    dependent on the net value of the 2. Delivery and so on
    In the example :
    According to the general terms and condition the customer has to pay for the
    order  one time with the first invoice -> 6,40 Euro freight cost.
    But the system had invoiced for the additional delivery with the invoice ->20, 60 Euro independent of the net value of the additional delivery.
    And we have to create a credit note for the customer.
    If we have several shipments of one order the system charges the freight costs of each shipment concerning to the net value.
    Thanks & Regards,

    If we donu2019t deliver all items based on backorder or something else,
       the customer has not to pay for the additional delivery.
    For this, you can have one header condition type and input manually the value if need be.  If you want to automate, then you have to go with adding the required codings to your routine which I feel, will complicate the system.
    G. Lakshmipathi

  • Referring Sales order no while issue stock to subcontractor

    Hi All,
    My client want to refer sales order while issuing stock to sub contractor.
    Scenario is like this, he procure all the materials based on the Sales order only.
    Now in sub contracting po he want to use Account assignment category C and item category L. And once the po is completed he want to provide stock to subcontractor using this sales order only.
    Please go thru the issue once and let me know the possiblities.
    Revert back in case not understand the issue.
    Reg,
    Ashok

    hi
    u can do this scenario
    u have to maintain combination of C& L
    then go to omjjj and in 541 movement in field selection (201),
    in additional acct assignment make sales order field mandatory ,so system will ask u for sales order in MB1A
    also in field selection enjoy add field KDAUF which is for sales order  ,so system will ask u for sales order in MIGO
    steps
    create po with C&L
    issue goods to sc (system will ask u for sales order ref
    and further normal subcon cycle
    just try it , i haven`t try it
    reward if helpful
    regrds
    kunal

Maybe you are looking for