Sales Order - pull conditions for an item

Hi all,
I have a Sales order with one item in it. When I go to this item in VA03 I see several tabs like SalesA, SalesB,.....Conditions,..... Now when I click the 'Conditions' tab I see all the Conditions for this Item. I want to pull this conditions information. I have the KNUMV value for this sales order so I can go to the table KONV where all the conditions are stored and with help of KNUMV and item number can I get all the conditions. BUT...
My question is there are some Conitions which have more lines below them(in blue color) like Gross Value, Net value,..... This information is not stored in the KONV table. For example in Conditons I have a condition Z7UP like
<b>Z7UP</b>    Unit Price    0.000   Eur   ....
           Gross value   1.5     Eur   ....
           Net value     0.0     Eur   ....
The lines Gross value and Net value are not stored in the table KONV. Does anyone know which tables maintain this information. I need to get that information too.... Waiting for your replies..........
Message was edited by: Raju Boda

HI Rich,
I looked to KONP and KOND but of no use. I dont have any entries in KOND and for KONP the key is KNUMH which I dont have. But I looked at all the entries in KONP but it seems this table doesnt have the information I am looking for.
I debugged VA03 for one sales order to look from where exactly it is pulling this data. I found that when I came across the function modules
PRICING_SUBSCREEN_PBO
PRICING_SUBSCREEN_SET_DATA
the required data is obtained automatically into structure XKOMV the movement I enter into these function modules in debugging mode.
I'm still unable to understand from where the system is pulling this data.
Any ideas please help. Thanks

Similar Messages

  • Sales order is blocked for single-item planning

    MD50 results in below
    Sales order  000010 is blocked for single-item planning
    Message no. 61211
    what are some possible causes?

    Hi Friend,
    Please check the status of the concerned sales order and validate it.

  • Sale Order MRP Run for All Order Line Items

    Greetings...
                     I have One Sales Order , in which i have ten different Line Items .
    Now I have to Run the MRP on basis of Created sales Order so that all Line items wi get consider insingle MRP Run on sales order base MRP Run.
    How to take MRP Run of One Sale Order for all Line Items.???
    In MD50 , we can have sales Order with Item..

    In MD50 you can give only one item at a time.
    Its a standard transaction meant to accomodate changes relevant for MRP after plant level MRP run  related to specific sales order Item.
    so either you need to do it multipal times by changing material or you need to go for MD02.
    Please explain bussiness case in detail why you want to restrict your MRP run for items in a specific sales order.
    Regards

  • Create ecatt script for one sales order creation with multiple line items

    Hi ,
    I want to create a ecatt script for one sales order creation with multiple line items. Preferably SAP GUI.
    This selection of data will be from an external file/ variants which will have only one row of data in it.
    Firstly: I have to sort the external file having same PO Numbers in an order.Group them together.
    Second: I have to create sales order for those many line items having same PO Number.
    Best Regard
    Taranum

    Hi Micky
    Firstl you should upload the Line items for a particular sales Order in an Internal table
    and then pass that internal table to your BAPI during your coding corresponding to a particu;lar sales order
    In case of any issues pls revert back
    Reward points if helpful
    Regards
    Hitesh

  • User exit to modify sales order pricing condition

    Hi Experts,
    I need ot modify Sales Order Header Condition (ZFRH), Condition Value (KWERT) for Transaction VA01 & VA02
    I agree there are many user exits which will modify XKOMV-KWERT structure and can populate what ever value we insert.
    But the value we insert is inserting into line item condition and the total of all line items is populating in Header .
    I need to modify only Header condition without populating Line items
    Thanks ,
    Basheer .

    Hi:
    Program : MV45AFZZ
    search for USEREXIT_NUMBER_RANGE.
    BR,
    Manthana

  • Sales Order-Shipping Conditions from Sold-to-Party

    Hi Guys
    When sales order created, shipping conditions copied from Sold-to-Party.  At that time, in SP, shipping conditions maintained wrongly. 
    After creating Sales Order, shipping conditions modified in SP, but system not allowing to modify shipping conditions in sales order.  Because of this, shipping point has not been determined.  Could not change manually also.
    Please suggest on this.
    Regards
    Uma

    Dear Uma
    On your comments
    "Because of this, shipping point has not been determined",
      I dont think, it could be bcoz of shipping condition.
    If Shipping Point is not flowing in sale order, then you need to check in OVL2 where you have to maintain the shipping point for the combination of Shipping Condition from Customer Master, Loading Group from Material Master and Plant.  So check whether you maintained this. 
    Meanwhile, with regard to the field Shipping Condition which you could not make change, please note that even if subsequent documents are generated, this field will be in editable mode only and if you try to change, system will give you a message
    -  Shipping Conditions were changed, Redetermine Routes and shipping of all items
    and if you click "Redetermine", the new shipping condition will take place.
    So, can you please let me know whether your sale document type is copied from standard OR where the screen controls are there.
    thanks
    G. Lakshmipathi

  • Mapping between Sales Order-Schedule-Line and Delivery-item

    Hi together,
    I want to extend the Datasource 2LIS_12_VCITM (Delivery-number, -item, Order-number,-item is available) by Sales Order Schedule Line.
    Could not find any ERP table (VBEP and LIPS allow a mapping only on item level) for the mapping between Sales Order Schedule Line and Delivery item yet. The use of the extractor 2LIS_12_VCSCL for the extention (e.g. infoset) afterwards is no option.
    Thanks for your help in advance!!
    Assign full points!!
    Sven

    Hi Reddy,
    thanks for your answer.
    I know that I have to add this field.. but the problem is, how to fill this field. I don't know how to map the delivery-item with the schedule line-item.

  • Error in sales order when selecting a warranty item in configurator 'Please enter required information - Service Reference Type Code'

    Error in sales order when selecting a warranty item in configurator 'Please enter required information - Service Reference Type Code'
    Not able to book the sales order because of this issue

    Order Management does not support the inclusion of optional service items in a configured Model BOM (see Support article #1296751.1 for more detail).  Allowing for such would therefore require customization.
    As you've found, there's no modeling restriction that prevents you from creating a Model BOM that includes optional service items, nor is there any problem with creating a Configurator Model for it.  And required service items (such as a warranty item that is a required child of an optional BOM component) do not present a problem; they have nothing to do with Configurator, and would never appear as sub-lines in OM.  The problem arises in OM, which requires that any service item be "associated" to the item it's "servicing".  OM does not automatically make such an association with service sub-lines, even though it might be argued that an association may be inferred by the BOM structure (i.e., OM does not assume that an optional service sub-line is necessarily associated, from a service standpoint, with its BOM parent).  OM customization is therefore required in order to hook any service item up to its corresponding product item.  Many customers who configure service along with product have implemented such a customization.
    (Another gap in such a solution that may be relevant to you is that for an included optional service item requiring recurring billing, Order Management does not create the requisite Service Contract.  Customers have likewise developed customizations to address this, as well.)
    As this is not specifically a Configurator matter (you could have created your order without using Configurator at all, and you would have experienced the exact same behavior), please do not take my explanation as being either authoritative or comprehensive (I am a Configurator expert, and only knowledgeable enough about Order Management to be dangerous).  It would be advisable for you to seek more detailed information/recommendations from the Order Management forum.
    Eogan

  • Particular sales order of the same line item hv created multiple production

    sir,
    I am having a problem in MD04. A particular sales order of the same line item hv created multiple production order.and continously planning is going on... I didn't get why it happens.
    Will u please suggest me what should i do in this case?
    Regards
    Meenu

    Hello sir,
    yes, ofcourse, for the finished material have the BOM with some semifinished productes which are to be produced .
    In co02 , we can go through the collective production order.
    One more thing is that, in the multiple production order date(scheduling date) shows in forward(future dates).
    For ex:09-05-2010.
    Regards
    Meenu

  • Sales order pricing conditions

    Can any one let me know what are the tables that are updated while working with sales order pricing conditions .......      r sales order conditions

    Hi Ali,
    VBRK     Billing document :header data
    VBRP     Billing document :Item data
    KONH      Conditions header
    KONP     Conditions items
    KONV     Procedure ( billing doc or sales order)
    KOND     Conditions (data)
    These tables will give sufficient information on Sales order pricing and its billing conditions etc.
    best regards
    Ramakrishna

  • User Exists In Sales Order Creation Program for adding "Reason For Reject"

    Hi gurus
    I have following requriement
    As New Sales Order created (VA01) by default or at the time of saving the sale order, perticular "Reason for Rejection" should be set to each line item.
    This is then can be removed in change (VA02) with Mass change.
    We need this to review the sales order / block sales order from MRP run.
    Please let me know how to manage this or is there any user exist for the same.
    Thanks
    Sunil K

    Hi,
    As per my knowledge the automatic creation of rejection order is not possible, still will check out and know.
    but for urgent use you will have to follow the manual way of changing the line items from OK to blocked for apporoval so you can achieve their not passing on to MRP.
    manual way is what is described below:
    You can either reject the whole sales document or individual items.
    Reject all items:
    If you want to reject all the items, choose Reject document in the change modus for the sales document.
    The system automatically selects all the items and you can enter a reason for rejection in the following dialog box.
    Enter the appropriate reason for rejection and choose Copy.
    The system assigns the same reason for rejection to all the selected items.
    Reject individual items:
    If you only want to reject some of the items, select those items in the item overview screen and choose Edit - Fast change of... - Reason for rejection.
    A dialog box appears in which you can enter the appropriate reason for rejection.
    Enter the appropriate reason for rejection and choose Copy.
    The system assigns the same reason for rejection to all the selected items.
    Reject individual items with different reasons of rejection:
    If you want to enter different reasons for rejection for the items, choose the Reason for rejection tab page from the overview screen when changing the sales document.
    You can enter a different reason for rejection for each item in the Reason for rejection field.
    regards,
    Siddharth.
    Edited by: SD on Mar 15, 2008 10:22 AM

  • While we create Sales order in CRM for Madhya Pradesh State JIVP (VAT Payable) showing twice in order

    Dear SAP,
    While we create Sales order in CRM for Madhya Pradesh State JIVP (VAT Payable) showing twice in order, but calculation has taken one time i.e. 14%, only JIVP displaying twice (Attached Screen shot S3.JPG) in CRM order, when comes to ECC side it is showing correct entry (Attached Screen shot S4.JPG) .
    Due to duplicate condition records exist in CRM table CNCCRMPRCUS956 (Attached Screen shot S1 & S2.JPG).
    This happens for MP state, as duplicate entry exist with MP state only,
    Please guide us to resolve the same.
    Regards,
    JK

    Hi JK,
    There is two thing. first is that when you create a sales order very same time pricing conditions added in the transaction as per the pricing procedure add for transaction type. these pricing procedures are transaction type specific not state or country specific so it will work. check here you are getting duplicate condition ?
    When ever you add material in the transaction that very time one the basis of the pricing condition added in the transaction IPC method do pricing. check after adding material in transaction duplicate condition is coming ?
    Secondly whenever the document replicates in ERP re-pricing again happening on conditions so theses conditions get corrected in ERP. Here if document is re-priced then system will consider it as change so again there suppose to be Bdocs get created from ERP to CRM again overwrite document so condition will be synchronized in CRM . I would request check the same too and revert.
    Thanks,
    Prem,

  • Sales order is blocked for Delivery-ZH Cost estimate Req

    Hi experts,
    When I am saving the sales order I am getting the informative message standard cost estimate for material xxxx is missing. when i am creating delivery with reference to sales order  it is not allowing me to do delivery it is showing that Sales order is blocked for Delivery-ZH Cost estimate Req( in  a log). Can you pls let me know what configuration I have to check.
    Regards,
    Sunina Agarwal

    hello, friend.
    it looks like product costing has been activated in your environment.  if such is the case, you would have to coordinate with your FICO consultant, and they have to make the necessary standard cost estimates.
    please also check if the cost estimates are part of the incompletion procedures.  if it is, you would not be able to bill the transaction even if this is taken out of the incompleteness procedure.
    regards.

  • Sales Order contract reference for IDOC

    Dear Guru's,
    Good Day,
    We are implementing a Sales order IDOC process for our client with Message type ORDERS (Inbound). Normally in a standard sales order process when u enter a Sold to party, Ship to party and material number system will automatically refere a OPEN CONTRACT available for the sold to party, Ship to party and material.
    In my case client has used a customized DATA-T type for Contract to sales order copy control, because of which system is not refering open contract when i run the IDOC.
    We can change the COPY CONTROL but client is using this process for more then 2 yrs. we dont know what will be the implecations or effect it will show on my client other SAP process.
    Can any one suggest me who i can refere a contract thru IDOC. May by thru BAPI or BADI.
    Your suggestions will be more appreciated.
    With best regards,
    M. Rajendran.

    Hi Dude,
    I tried checking it with E1EDK41 segment and i gave the open contract number in the field XBELNR. Still Sales order is not refering the contract.
    Any other option available.
    With Best Regards,
    M. Rajendran.

  • Sales Order - Availability check for components

    Hi All,
    I have 2 parts to my qns.
    1. When a sales order is created for a component, with a req date, the system checks & informs if the mtl can be provided on the req date & if not proposes a new date - May i know which checking rule is used & also what all does the system check for?
    2. A component say 'ABC' is used internally for production purpose & also sold as a spare part. A sales order for this component is created with a req dt. say 1.3.2008. The system commits the stock to the sales order. A production order is created later with a req. dt for 'ABC' say 1.2.2008. So when i carry out a collective availability check for the plant with ATP checking rule & with availability check reset indicator ticked, i believe the system should reset the commitments made to the sales order & assign the stock to the production order, but it is not happening so. Once the commitment is made to the sales order, it is not resetting, how can i change this behaviour?
    Await inputs.
    Anyone to help on this?
    Edited by: Vivek on Jan 15, 2008 10:56 AM

    As we know, availability check is controlled by the combination of checking rule and the checking grp.
    U can see this at OVZ9 Screen. checking grp is proposed from material master Sales org 2 view or MRP2 views.
    In the OVZ9 screen itself, we are setting what are all the stocks the system has to include when doing availability check.
    The checking rule specifies the scope of the availability check for the respective transactions in sales and distribution by specifying precisely which stocks, receipt and issue elements should be taken into account during the availability check.
    Every checking rule is allocated to a checking group: together these two elements determine the final inspection requirements. In addition, the checking rule includes a specification whether or not an availability check should take into account the replenishment lead time.
    Currently, the checking rule is predefined in SD.
    while answering to the second question, i think the system carries out the availability check again at the time of delivery, provided u need to maintain the availabililty check indicator at req. class level.
    Hope i answers.
    Reward points if it is useful.

Maybe you are looking for