Sales Order Release using TCode V.23

I AM CREATING A SERVICE CONTRACT...WITH REFERENCE TO THE CONTRACT A SALES ORDER IS CREATED...THERE IS NO DELIVERY AS THE ITEM BILLABLE IS SERVICE ( MANHOURS )...BILLING WITH BILLING PLAN TYPE ( PERIODIC ) IS CONFIGURED...
NOW WE WANT TO CREATE A HOLD AT THE SALES ORDER AND RELEASE USING TCODE V.23...can you please let me know how this hold and relase is to be configured.
Regards,
Tommy.

YOu do not have to do any specific customization for this.
Your sales order is on a billing block. So it cant be processed further.
Transaction v.23 is used to collectively process such documents to release the billing blocks.
YOU have to give your criteria in the initial screen and check delete billing blocks.
Then as per your selction criteria a list of documents will be presented to you. You select those and say delete blocks..All the billing blocks of these docs get dleted and are free to be billed now.
You set the billing blocks for the respective sales doc types in transaction VOV8.
Thanks
Vishal

Similar Messages

Sales order released from Credit block, but Purchase Requistion not created

Hi,
In third party sales scenario based on Scheduline Line category configuration purchase requistion creates when the order is created. If order is blocked for credit check then purchase requistion will not be created until order released from credit.
Here my scenario is
I have two users like A and B. When A releases the order from credit block by using transaction VKM1, Sales order releasing from credit and creating Purchase requistion. But, if the order is released by B, Sales order is getting released from credit but purchase requstion is not getting created.
There is no issue from security side, we activated trace and analysed everything it is not security issue.
Thanks and Regards
Alokam Chandra Sekhar

Hi Lakshmi,
Thanks for reply. I followed your instructions, pls find my observations below.
1. Can you check the below settings:
What is the Credit status in the header status tab page of the sales order for the B's sales order?
Is it "Not approved or releasedu201D If it is not approved, you might have released the sales order in VKM3, but you might not have saved it.
Reply: We are releasing order through VKM1 and after releasing the order the status is showing as "Released".
2. Did you use the same material for B's Sales order? If it a different material check the Item category and Schedule line category whether these are same with A's sales order.
Reply: Both the orders has same information, like material Item category and scheduline category
3. Check in the Schedule line tab page --> Procurement button whether you have maintain vendor, Source determination and Info record.
Source list has been verified through ME03 transaction and vendor data maintained correctly.
I really appreciate your time and efforts on this.. looking forward some more suggestions...
Thanks and Regards
Alokam Chandra Sekhar

Mass sales order release.

hi guru's,
Can you tell me that what to do Mass sales order release?any Tcode for tht?

U wanted the sales orders to be released(release status) . the scenario is the end user creates sales orders and saves them. and Sales manager after going thru them will release them(say after approving the order) for delivery- without which the end user will not be able to create delivery.
U need to assign status profile to OR (tcode bs02) in the back ground of OR. then the sales orders created will be released by sales manager . The sales manager can go for change mode of OR and then change the status .to released .
path- spro-sd-sales - sales docs-define n assign status profile(BS02)

Sales Order Releasing strategy

Dear All
Our SAP implimentation is going on.
I want Sales order releasing stratety. pl help
Eknath

back ground of sales docs, there is a field status profile. Go to spro-img-s&d-sales - soles documents - Define and assign Status profile -
tcode-BS02

Error in creation of sales order bu using BAPI_SALESORDER_CREATEFROMDAT2

Hi ,
I am trying to create sales order by using bapi.
after passing all the parameters to bapi iam getting message as shown below.
SALES_HEADER_IN has been processed successfully
SALES_ITEM_IN has been processed successfully
Order receipt/delivery not possible, credit customer blocked
I had passed scedule line data ,and BAPI_TRANSACTION_COMMIT
also still iam getting this message.
please help me out of this problem.
Thanks,
Shuja.

Hi Shuja
I guess the message is just a warning eventhough the order is created. The warning message states that Auto-Delivery can not be created.
Please check below to understand how the customer is blocked:
1. Manual Block -> Transaction XD03
-->Menupath: Extras->Blocking Data
2. Credit Block -> Transaction FD33
--> In the overview screen check the difference of value between Credit Limit & Credit Exposure
I guess in the case whereby Credit Limit value is less than Credit Exposure also this can happen.
Please try using a different Customer. Also simulate via transaction VA01.
Hope this helps.
Kind Regards
Eswar

Sales order creation using LSMW

Hi All,
I am creating open sales order (VA01) using LSMW where I am using BAPI: BUS2032 and Method CREATEFROMDAT2.
I need to pass multiple line items for the same Header data, but the LSMW is creating multiple sales orders with a single line item every time.
I tried giving "on_change_transfer_record" after Header record but that doesn't work.
Can anyone suggest any suitable solution for this using BAPI only other than BDC, report program etc.
Thanks in Advance
Asif Ali Khan

Hi Asif Khan,
Please check this link
BAPI_SALESORDER_CREATEFROMDAT2 - Sales Order Create
http://sap-img.com/abap/bapi-salesorder-createfromdat2.htm
Best regards,
raam

WMS : How to Process Sales Order Released before Turning on WMS

Hello Gurus,
How to process sales orders released before WMS enable flag is turned on in the new WMS enviournment in Oracle 11.5.10 ?

Helios,
Thanks for the document.
I m looking for how to perform Pick confirm transactions for already printed Pick slips before WMS enabled flag is turn on for the org.
One option is to close all the deliveries but if there is no on hand at that point the they will remain option.
Other option is to Back order those deliveries and re release them post wms enable flag is turned on... The only issue i see here is that if there are more new orders for one of the items and the orders are released then which orders will get allocated/reserved if there is limited on hand quantity to statisfy the SO need.
Let me know if you can think off some alternative solution.
Apprecite help !!
Thanks,
Sam

Change only material qunatity in sales order by using BAPI

Hi All,
How to change only the material quantity in existing sales order by using BAPI.
Please help me in this regards.
Regards
Deekshitha.

Hi
See the sample code and do accordingly
REPORT Z_SALES_ORDER_CHANGE
NO STANDARD PAGE HEADING
LINE-SIZE 132
LINE-COUNT 65(0)
MESSAGE-ID ZZ.
TABLES: VBAP.
DATA:
V_FILEIN(90) TYPE C,
V_RECIN TYPE I,
V_RECVBAP TYPE I,
V_RECORDER TYPE I,
V_VBELN LIKE VBAP-VBELN,
ORDERHEADERINX LIKE BAPISDH1X.
DATA: BEGIN OF I_ORDERS OCCURS 0,
VBELN LIKE VBAK-VBELN,
POSNR LIKE VBAP-POSNR,
BRGEW(18) TYPE C,
VOLUM(18) TYPE C,
END OF I_ORDERS.
DATA: BEGIN OF I_OUTPUT OCCURS 0,
VBELN LIKE VBAK-VBELN,
POSNR LIKE VBAP-POSNR,
GEWEI LIKE VBAP-GEWEI,
BRGEW LIKE VBAP-BRGEW,
VOLUM LIKE VBAP-VOLUM,
CKWGT TYPE C,
CKVOL TYPE C,
END OF I_OUTPUT.
DATA: BEGIN OF ORDERITEMIN OCCURS 0.
INCLUDE STRUCTURE BAPISDITM.
DATA: END OF ORDERITEMIN.
DATA: BEGIN OF ORDERITEMINX OCCURS 0.
INCLUDE STRUCTURE BAPISDITMX.
DATA: END OF ORDERITEMINX.
DATA: BEGIN OF RETURN OCCURS 0.
INCLUDE STRUCTURE BAPIRET2.
DATA: END OF RETURN.
DATA: BEGIN OF BAPIRETURN OCCURS 0.
INCLUDE STRUCTURE BAPIRET2.
DATA: END OF BAPIRETURN.
PARAMETERS:
P_PATH(45) TYPE C DEFAULT '/usr/users/ftpsapom/' LOWER CASE,
P_FNAME(32) TYPE C DEFAULT '/sweetjo.txt' LOWER CASE.
START-OF-SELECTION.
CONCATENATE PATH AND FILE NAME INTO ONE VARIABLE
CONCATENATE P_PATH P_FNAME INTO V_FILEIN.
OPEN DATASET
IF V_FILEIN IS INITIAL.
MESSAGE E002 WITH 'FILE' V_FILEIN 'DOES NOT CONTAIN ANY DATA!'.
ELSE.
OPEN DATASET V_FILEIN
FOR INPUT
IN TEXT MODE.
IF SY-SUBRC = 0.
READ DATASET
DO.
READ DATASET V_FILEIN INTO I_ORDERS.
IF SY-SUBRC = 0.
APPEND I_ORDERS.
ELSE.
EXIT.
ENDIF.
ENDDO.
CLOSE DATASET
CLOSE DATASET V_FILEIN.
IF SY-SUBRC <> 0.
MESSAGE E002 WITH 'ERROR - CLOSING' V_FILEIN.
ENDIF.
ELSE.
MESSAGE E002 WITH 'ERROR - COULD NOT OPEN' V_FILEIN.
ENDIF.
ENDIF.
SORT AND REMOVE DUPLICATES FROM I_ORDERS
SORT I_ORDERS BY VBELN POSNR.
DELETE ADJACENT DUPLICATES FROM I_ORDERS.
POPULATE I_OUTPUT
LOOP AT I_ORDERS.
SHIFT I_ORDERS-POSNR LEFT DELETING LEADING SPACE.
CONCATENATE '0' I_ORDERS-POSNR INTO I_ORDERS-POSNR.
SELECT SINGLE BRGEW VOLUM
FROM VBAP
INTO (VBAP-BRGEW, VBAP-VOLUM)
WHERE VBELN = I_ORDERS-VBELN
AND POSNR = I_ORDERS-POSNR.
IF SY-SUBRC = 0.
IF VBAP-BRGEW = 0.
I_OUTPUT-CKWGT = 'X'.
ENDIF.
IF VBAP-VOLUM = 0.
I_OUTPUT-CKVOL = 'X'.
ENDIF.
I_OUTPUT-VBELN = I_ORDERS-VBELN.
I_OUTPUT-POSNR = I_ORDERS-POSNR.
I_OUTPUT-GEWEI = 'ST'.
I_OUTPUT-BRGEW = I_ORDERS-BRGEW.
I_OUTPUT-VOLUM = I_ORDERS-VOLUM.
APPEND I_OUTPUT.
CLEAR: I_OUTPUT.
ENDIF.
V_RECIN = V_RECIN + 1.
ENDLOOP.
POPULATE BAPI DATA AND RUN BAPI
CLEAR: ORDERHEADERINX, ORDERITEMIN, ORDERITEMINX,
RETURN, BAPIRETURN.
REFRESH: ORDERITEMIN, ORDERITEMINX, RETURN, BAPIRETURN.
ORDERHEADERINX-UPDATEFLAG = 'U'.
LOOP AT I_OUTPUT WHERE CKWGT = 'X' OR CKVOL = 'X'.
V_RECVBAP = V_RECVBAP + 1.
IF I_OUTPUT-VBELN <> V_VBELN AND SY-TABIX <> 1.
V_RECORDER = V_RECORDER + 1.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
SALESDOCUMENT = V_VBELN
ORDER_HEADER_INX = ORDERHEADERINX
TABLES
RETURN = RETURN
ORDER_ITEM_IN = ORDERITEMIN
ORDER_ITEM_INX = ORDERITEMINX.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = 'X'
IMPORTING
RETURN = BAPIRETURN.
WRITE OUT RETURN
LOOP AT RETURN.
WRITE: / RETURN.
ENDLOOP.
WRITE: / BAPIRETURN.
SKIP.
CLEAR: ORDERITEMIN, ORDERITEMINX,
RETURN, BAPIRETURN.
REFRESH: ORDERITEMIN, ORDERITEMINX, RETURN, BAPIRETURN.
ENDIF.
ORDERITEMIN-ITM_NUMBER = I_OUTPUT-POSNR.
ORDERITEMIN-UNTOF_WGHT = I_OUTPUT-GEWEI.
IF NOT I_OUTPUT-CKWGT IS INITIAL.
ORDERITEMIN-GROSS_WGHT = I_OUTPUT-BRGEW.
ORDERITEMINX-GROSS_WGHT = 'X'.
ENDIF.
IF NOT I_OUTPUT-CKVOL IS INITIAL.
ORDERITEMIN-VOLUME = I_OUTPUT-VOLUM.
ORDERITEMINX-VOLUME = 'X'.
ENDIF.
APPEND ORDERITEMIN.
ORDERITEMINX-ITM_NUMBER = I_OUTPUT-POSNR.
ORDERITEMINX-UNTOF_WGHT = 'X'.
ORDERITEMINX-UPDATEFLAG = 'U'.
APPEND ORDERITEMINX.
V_VBELN = I_OUTPUT-VBELN.
ENDLOOP.
RUN BAPI ON LAST ORDER
IF NOT ORDERITEMIN IS INITIAL.
V_RECORDER = V_RECORDER + 1.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
SALESDOCUMENT = V_VBELN
ORDER_HEADER_INX = ORDERHEADERINX
TABLES
RETURN = RETURN
ORDER_ITEM_IN = ORDERITEMIN
ORDER_ITEM_INX = ORDERITEMINX.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = 'X'
IMPORTING
RETURN = BAPIRETURN.
WRITE OUT RETURN
LOOP AT RETURN.
WRITE: / RETURN.
ENDLOOP.
WRITE: / BAPIRETURN.
SKIP.
ENDIF.
WRITE OUT RECORD COUNT FROM FILE
WRITE: / 'RECORD COUNT FROM FILE ', V_RECIN.
SKIP.
WRITE OUT RECORD COUNT FROM FILE
WRITE: / 'RECORD COUNT OF LINES TO CHANGE ', V_RECVBAP.
SKIP.
WRITE OUT RECORD COUNT FROM FILE
WRITE: / 'RECORD COUNT OF ORDERS TO CHANGE ', V_RECORDER.
SKIP.
TOP OF PAGE
TOP-OF-PAGE.
WRITE:/1(5) TEXT-H01, 6(8) SY-DATUM MM/DD/YY,
100(8) TEXT-H02, 126(8) SY-PAGNO.
WRITE:/1(5) TEXT-H03, 6(8) SY-UZEIT USING EDIT MASK '__:__:__',
20(77) TEXT-H04,
100(8) TEXT-H05, 108(25) SY-REPID.
WRITE:/1(6) TEXT-H06, 8(12) SY-UNAME,
20(4) TEXT-H07, 25(32) SY-HOST,
100(13) TEXT-H08, 121(8) SY-SYSID,
129 '/', 130(3) SY-MANDT.
ULINE.
SKIP.
Reward points if useful
Regards
Anji

Error in sales order creation using bapi

Hi,
Iam trying to create sales order by using BAPI_SALESORDER_CREATEFROMDAT1 and when iam trying to execute
the function module by passing all th eparameters and iam getting the error as
inspite of entering sold_to_party and ship_to_party details in table ORDER_PARTNERS
"enter the sold_to_party or ship to party details"
please help me out in this isue its an urgent.
Thanks.
sayed.

Can you share the codes ?
Thanks.
Ashish

Reena Prabhakar - Sales order creation Using BAPI

Hi Reena,
This is Dinesh,i also face problem in Sales order creation using BAPI if you can send me the code it would be great help to me.
Regards,
Dinesh

Anyhow, here is the code that I am using currently which works perfectly well. Not sure if it will be of any help to you, since the values to the BAPI come from the Webdynpro application. I have values stored in my "Test data directory" which I use for testing from the backend.
FUNCTION ztest.
Call the BAPI to create Sales Order
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
    EXPORTING
      order_header_in     = l_order_header
    IMPORTING
      salesdocument       = l_salesdocument
    TABLES
      return              = it_return
      order_items_in      = it_order_items
      order_partners      = it_order_partners
      order_schedules_in = it_order_schdl
      order_conditions_in = it_order_conditions
      order_text          = it_order_text.
READ TABLE it_return WITH KEY type = 'E'.
IF sy-subrc = 0.
*-- error occured
    CALL FUNCTION 'BAPI_TRANSACTION_ROLLBACK'.
ELSE.
*-- no error
    CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ENDIF.
ENDFUNCTION.

Need sales order creation using bapi in oops

need code for sales order creation using bapi in oops

hi rocky,
could you pls give a bit explanation on what you are expecting.
regards,
Pavan

Mass sales order creation using BAPI

Dear All,
Can anyone help in mass sales order creation using Bapi BAPI_SALESORDER_CREATEFROMDAT2.
For example if i want to create 3 sales order with three item per order . i am populating
HEADER = 3 Records
Item = 9 records
schedule = 9 records
partner = 1 record.
Then after populating the records I am calling Bapi BAPI_SALESORDER_CREATEFROMDAT2
to create order. It should have created three order but unfortunately it creates
only one sales order. I debugged and found that records are correct both in header,
item, scheudle and partners.
Could you please guide me what I am missing for creation of mass orders.
I appreciate your time and many thanks in advance.
cheers
chandra

Hi Chandra,
Do like this.
Loop at Header table into wa_header.
*-- Move BAPI Header data
Loop at item table into wa_item where condition.
*-- in this move all Item and Schedule line item to the BAPI.
At end of item .
Use the below function modules.
BAPI_SALESORDER_CREATEFROMDAT2
BAPI_TRANSACTION_COMMIT.
Endloop.
Endloop.
Regards,
Balavardhan.K

Sales Order Upload using IDOC : Batch Input error

Hi all
When I am uploading sales order data using idoc method it was giving the below error when the Items are more than 10,if the items are less than 10 it was creating the sales order successfully.
Screen 0000 is too large for internal batch input area
for upload I am using the standard Meassege type and Basic idoc type
Message type : ORDERS
Basic idoc type : ORDERS05
Function Module : idoc_input_orders(ORDE)
Please help if there is any Idea
Thanks in Advance
Warm regards
Rajasekhar

Hi Madhu,
This error might be due to screen resolution. Try to reduce screen resolution and run your program.
Cheers
Manohar

How to know the sales order closed using right click menu -Close ???

I have an sales order with ten item, I have copied the same to delivery and before adding the Delivery I have deleted some items. After adding the Delivery, I manually closed the sales order by using the "right click menu close".
The Open Quantity of those lines are already closed while i Close it manually.
Now i need a report regarding the sales orders which i have closed manually. Any Options??

Check the below result
DocNum     DocDate     CardCode     CardName     Row#     ItemCode     Dscription     Price     Quantity     LineTotal
2     2012-02-04 00:00:00.000     ED-C-102     AI HUDHA BOOK STALL     2     1010          150.000000     10.000000     1500.000000
3     2012-02-04 00:00:00.000     ED-C-103     AL AMEEN ENGLISH SCHOOL-MANKADA     2     1011     ZINC ROD HIGH GRADE PURE ZINC 140 X 9 MM     59.790000     10.000000     597.900000
this is the result i get while i execute your query
but look at the db result
DocEntry     LineNum     TargetType     TrgetEntry     LineStatus     ItemCode     Quantity     OpenQty
1     0     15     2     C     1010     10.000000     0.000000
2     0     15     3     C     1010     10.000000     0.000000
2     1     -1     NULL     C     1010     10.000000     0.000000
3     0     15     4     C     1010     1.000000     0.000000
3     1     -1     NULL     C     1011     10.000000     0.000000
3     2     15     4     C     1012     15.000000     0.000000
3     3     15     4     C     1013     20.000000     0.000000
4     0     15     5     O     1010     10.000000     5.000000
See the last line data...it have open quantity of 5 and it also have the target type 15, If I close the sales order with docentry 4 manually using right click, the open quantity will be Zero..
I need that last line result also as my output..
Hope you understand my problem.
Thank You

Sales order creation using webdynpro in ABAP

Plz give the process how to create sales order creation using webdynpro in ABAP. if not possible plz let me know how to create in JAVA.
It is very urgent. I hope i will get it very soon.
Thanks all
Sai

In your WDA application, all you need to do is call the BAPI BAPI_SALESORDER_CREATEFROMDAT2 when the user clicks some button. Most likely, you can put the code for this BAPI call in the onAction method for your button.
Regards,
Rich Heilman

Sales Order Release using TCode V.23

Similar Messages

Maybe you are looking for