Sales & Order report performance is too slow!

Hi All,
Sales report is prety slow.It took 90% in OLAP time. I tried RSRT all the possible ways & also created OLAP fill query level also but No result. Please help me.
Thanks
Vasu.

Hi Vasu,
CAN You please refer below link
http://wiki.sdn.sap.com/wiki/display/BI/HowtoImproveQueryPerformance-A+Checklist
it tells explains how you can improve your query performace.
Also as i told since you are FETCHING DATA direct from MASTER data report will be bit slow so try to get data directly from cube and may be u can use filters also.
Hope this may help you.
Regards
Nilesh

Similar Messages

Crystal Reports performance is too slow

Dear SDNers,
I have designed a crystal report which is fetching data from a Z developed function module. From crystal report side, used filters.But while executing report, it is calling the function module multiple times.
due to this performance is very bad. Why report is calling mutiple times of the function module. Do need to modify from crystal report side or from function module side. Please clarify.
Regards,
Venkat

A similar issue was seen a year ago It was regarding a function module call being executed multiple times from CR4Ent tool. It involved the usage of sub reports inside that report and the issue was generic for any function module used for testing.
At that time, the issue was resolved by upgrading to the latest available patch of CR4Ent and also by applying the latest patch at SAP R3 end.
If you are able to post the exact support package and patch level of CR4Ent and also for the SAP R3 system, then someone can tell whether its the latest or not.
-Prathamesh

Open sales orders report

Hi,
Does anyone know of any open sales orders report ? VA05 ? Table join between VBAP-VBAK ?
Thanks

Hello,
Does anyone know of any open sales orders report ? VA05 ? Table join between VBAP-VBAK ?
If your basic requirement is find out the open Sales Order then you can look out for the below standard report:
VA05/VA05N
If your requirement involves some values to be included then kindly urge you to go for SQVI technique involving tables like VBAK,VBAP,VBUK and other Sales table based on requirement.
Regards,
Sarthak

Open Sales Order Report

Hello..
my client wants to have the open sales Order report in following format :
======================================================================================================
Customer Name | Item 1 code | Item 2 code | Item 3 code | Item 4 code | Item 5 code | Item 6 code | Item 7 code |
=======================================================================================================
Jack Inc.......................987.................865.....................654.................543.......................739..................543...................987
Colt Inc.......................237.................213.....................799..................321.......................875...................187...................122
IOUU LLC...................127.................535.....................654..................777.......................211...................345...................777
=====================================================================================================
.................................1351..............1613...................2107.................1641.....................1825.................1075..................1886
=====================================================================================================
pls help me to create sql query for the above
rekha
Edited by: Rekhatiwari on Dec 16, 2010 10:46 AM
Edited by: Rekhatiwari on Dec 16, 2010 10:47 AM

Hi,
Try this:
SELECT T0.CardName,
(Select SUM(isnull(T1.quantity,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '[%2\]') Item1,
(Select SUM(isnull(T1.quantity,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '[%3\]') Item2,
(Select SUM(isnull(T1.quantity,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '[%4\]') Item3,
(Select SUM(isnull(T1.quantity,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '[%5\]') Item4,
(Select SUM(isnull(T1.quantity,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '[%6\]') Item5,
(Select SUM(isnull(T1.quantity,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '[%7\]') Item6,
(Select SUM(isnull(T1.quantity,0)) from RDR1 T1 WHERE T1.DocEntry = T0.DocEntry AND T1.ItemCode = '[%8\]') Item7
FROM ORDR T0
WHERE T0.docdate between [%0\] and [%1\]
That might be the only way close to your requirement.
Thanks,
Gordon

XML Pub: Purchase Order Report (Portrait) running too long

Hi:
"XML Pub: Purchase Order Report (Portrait)" running too long. It should be 1min. but now over 20min. This is 11.5.10.2 on unix.
The log file is like the following. It stops there. I checked another one ran before, there are more data...
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_report_type='R'
P_po_num_from='6640015'
P_po_num_to='6640015'
P_test_flag='N'
P_user_id='14955'
P_QTY_PRECISION='4'
P_fax_ind='N'
P_EMAIL_IND='N'
P_REQUEST_SOURCE='MANUAL'
Environment will now switch to UTF-8 code-set.
Parts of this log file may not display correctly
as a result. This is an expected behavior.
XML_REPORTS_XENVIRONMENT is :
/oracle/product/8.0.6finshdw/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /oracle/product/8.0.6finshdw/guicommon6/tk60/admin/Tk2M
otif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
===============================================
From the internal Manager log:
Process monitor session started : 29-APR-2011 12:35:56
Internal Concurrent Manager found node APPSNOTE2 to be down. Adding it to the l
ist of unavailable nodes.
Process monitor session ended : 29-APR-2011 12:36:00
Process monitor session started : 29-APR-2011 12:38:00
Process monitor session ended : 29-APR-2011 12:38:04
Process monitor session started : 29-APR-2011 12:40:04
Process monitor session ended : 29-APR-2011 12:40:09
Process monitor session started : 29-APR-2011 12:42:09
Internal Concurrent Manager found node APPSNOTE1 to be down. Adding it to the l
ist of unavailable nodes.
Process monitor session ended : 29-APR-2011 12:42:15
======================
please advise.

last lines of FNDCPGSC29793.tx
)]:BEGIN :[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.Processor.sleep()]:Waiting 10 seconds (10000 ms)
[ 1:STATEMENT:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.Processor.run()]:Running loop from the top.
-1:-1:PROCEDURE:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.Processor.processControlEvent(String)]:BEGIN (noEvent)
:-1:-1:STATEMENT:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.Processor.processControlEvent(String)]:Did not receive any control events.
-1:PROCEDURE:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsm.GSMQueueProcessor.process()]:BEGIN
:-1:PROCEDURE:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsm.GSMQueueProcessor.read()]:BEGIN
:-1:STATEMENT:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.Processor.run()]:Running loop from the top.
-1:-1:PROCEDURE:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.Processor.processControlEvent(String)]:BEGIN (noEvent)
:-1:STATEMENT:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.Processor.processControlEvent(String)]:Did not receive any control events.
:-1:PROCEDURE:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.SvcComponentMonitor.process()]:BEGIN
-1:-1:PROCEDURE:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.SvcComponentMonitor.startAutomaticComponents()]:BEGIN
-1:STATEMENT:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.SvcComponentMonitor.process()]:On-Demand monitoring will not occur this round; the count is 3 out of 5
[Apr 29, 2011 1:19:5 :-1:-1:STATEMENT:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.Processor.run()]:Resetting Error Count
[Apr 29, 2011 1:19:51 1:-1:PROCEDURE:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.Processor.sleep()]:BEGIN :1304097591452:Thread[ComponentMonitor,5,main]:0:-1:
-1:STATEMENT:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.Processor.sleep()]:Waiting 60 seconds (60000 ms)
[Apr 29, 2011 1:20:00 PM EDT] 1:-1:PROCEDURE:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.Processor.sleep()]:BEGIN
[Apr 29, 2011 1:20:00 PM EDT]: 4:-1:-1:STATEMENT:[SVC-GSM-WFALSNRSVC-262965 : oracle.apps.fnd.cp.gsc.Processor.sleep()]:Waiting 10 seconds (10000 ms)
Edited by: user9231603 on Apr 29, 2011 10:22 AM
Edited by: user9231603 on Apr 29, 2011 10:25 AM

How To Add a new column for ZPR0 price in open sales order report ??

HI,
my requirement is To Add a new column for ZPR0 price in open sales order report if the order/scheduling agreement is a cross-company code transaction l(company code of order/scheduling agreement <> company code of delivering plant), price = ZPR0 price as at estimated GI date

k

To Add a new column for ZPR0 prce in open sales order report

HI,
my requirement is To Add a new column for ZPR0 prce in open sales order report if the order/scheduling agreement is a cross-company code transaction l(company code of order/scheduling agreement <> company code of delivering plant), price = ZPR0 price as at estimated GI date

HI,
my requirement is To Add a new column for ZPR0 prce in open sales order report if the order/scheduling agreement is a cross-company code transaction l(company code of order/scheduling agreement <> company code of delivering plant), price = ZPR0 price as at estimated GI date

Help on Sales order report

Hi,
I have a code to display Sales order report. But i need to generate Sales order Line item wise Report. Can anyone help me to modify this code to suit my criteria?
DATA: IT_VBAK LIKE VBAK OCCURS 0 WITH HEADER LINE.
DATA: IT_VBAP LIKE VBAP OCCURS 0 WITH HEADER LINE.
PARAMETERS: SORG LIKE VBAK-VKORG,
CCODE LIKE VBAK-BUKRS_VF.
SELECT * FROM VBAK INTO TABLE IT_VBAK UP TO 100 ROWS
WHERE
VKORG = SORG AND
BUKRS_VF = CCODE.
SELECT * FROM VBAP INTO TABLE IT_VBAP UP TO 100 ROWS
FOR ALL ENTRIES IN IT_VBAK
WHERE
VBELN = IT_VBAK-VBELN.
LOOP AT IT_VBAP.
WRITE: / IT_VBAP-VBELN, IT_VBAP-ERNAM, IT_VBAP-POSNR.
ENDLOOP.
Thanks in advance..
Any help will be greatly appritiated

Hi
Hope it will help you..
Reward if help.
REPORT ZVRDOC0 no standard page heading
line-size 300
line-count 50(5).
TABLES : vbak, "Sales Document Header Level
vbap, "Sales Document Header Level
kna1. "General Data in customer Master
*INTERNAL TABLE T_VBAP
DATA : Begin of t_vbap occurs 0,
       vbeln like vbap-vbeln,
       matnr like vbap-matnr,
       posnr like vbap-posnr,
       arktx like vbap-arktx,
       kwmeng like vbap-kwmeng,
       cmkua like vbap-cmkua,
       end of t_vbap.
*INTERNAL TABLE T_TAB.
DATA : Begin of t_tab occurs 0,
        vbeln like vbak-vbeln,
        kunnr like vbak-kunnr,
        audat like vbak-audat,
        netwr like vbak-netwr,
        vkorg like vbak-vkorg,
        name1 like kna1-name1,
        land1 like kna1-land1,
        end of t_tab.
*INTERNAL TABLE T_FINAL.
DATA : Begin of t_final occurs 0,
        vbeln like vbap-vbeln,
        kunnr like vbak-kunnr,
        matnr like vbap-matnr,
        posnr like vbap-posnr,
        arktx like vbap-arktx,
        kwmeng like vbap-kwmeng,
        cmkua like vbap-cmkua,
        audat like vbak-audat,
        netwr like vbak-netwr,
        vkorg like vbak-vkorg,
        name1 like kna1-name1,
        land1 like kna1-land1,
        end of t_final.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE text-bO3.
parameters : P_kunnr like vbak-kunnr.
select-options : S_vbeln for vbak-vbeln,
                 S_audat for vbak-audat.
SELECTION-SCREEN END OF BLOCK B1.
start-of-selection.
select vbeln matnr posnr arktx kwmeng cmkua from vbap
into corresponding fields of table t_vbap where vbeln in S_vbeln .
IF sy-subrc EQ 0.
select vbakkunnr vbakvbeln vbakaudat vbaknetwr vbak~vkorg
        kna1name1 kna1land1 into table   t_Tab   from
        vbak   join kna1   on kna1kunnr = vbakkunnr
        FOR ALL ENTRIES IN t_vbap
        where vbak~vbeln = t_vbap-Vbeln and
        vbak~kunnr = p_kunnr and
        vbak~audat in S_audat .
ENDIF.
*end-of-selection.
loop at t_vbap.
read table t_tab with key vbeln = t_vbap-vbeln.
move :
t_vbap-vbeln to t_final-vbeln,
t_vbap-matnr to t_final-matnr,
t_vbap-posnr to t_final-posnr,
t_vbap-arktx to t_final-arktx,
t_vbap-kwmeng to t_final-kwmeng,
t_vbap-cmkua to t_final-cmkua,
t_tab-kunnr to t_final-kunnr,
t_tab-audat to t_final-audat,
t_tab-netwr to t_final-netwr,
t_tab-vkorg to t_final-vkorg,
t_tab-name1 to t_final-name1,
t_tab-land1 to t_final-land1.
append t_final.
clear t_Final.
endloop.
sort t_Final by vbeln   Kunnr    matnr posnr .
loop at t_final.
at new vbeln.
write : /1 SY-VLINE, 2 t_final-vbeln color 5 inverse.
ULINE /1(250).
endat.
write : /1 SY-VLINE, 2 t_final-vbeln color 5 inverse,
20 SY-VLINE, 21 t_final-posnr color 5 inverse,
40 SY-VLINE, 41 t_final-matnr color 5 inverse,
60 SY-VLINE, 61 t_final-arktx color 4 inverse,
80 SY-VLINE, 81 t_final-kwmeng color 4 inverse,
100 SY-VLINE, 101 t_final-cmkua color 4 inverse,
120 SY-VLINE, 121 t_final-kunnr color 3 inverse,
140 SY-VLINE, 141 t_final-audat color 3 inverse,
160 SY-VLINE, 161 t_final-netwr color 2 inverse,
180 SY-VLINE, 181 t_final-vkorg color 2 inverse,
210 SY-VLINE, 211 t_final-name1 color 1 inverse,
230 SY-VLINE, 231 t_final-land1 color 1 inverse,
250 SY-VLINE.
at end of vbeln.
sum.
ULINE /1(250).
write: /60 SY-VLINE, 'Total' ,
81 t_final-kwmeng color 4 inverse ,100 SY-VLINE,
101 t_final-cmkua color 4 inverse,120 SY-VLINE.
ULINE /1(250).
endat.
at last.
SKIP 2.
sum.
ULINE /1(250).
write: /1 SY-VLINE, 60 SY-VLINE, 'Grand Total' ,
81 t_final-kwmeng color 4 inverse , 100 SY-VLINE ,
101 t_final-cmkua color 4 inverse,120 SY-VLINE.
ULINE /1(250).
endat.
endloop.
TOP-OF-PAGE.
ULINE /50(24).
WRITE : /50 SY-VLINE , 52 'SALES ORDER DETAILS' COLOR 5,
73 SY-VLINE.
ULINE /50(24).
ULINE .
WRITE: /10 'CURRENT DATE :', 25 SY-DATUM COLOR 1 INVERSE,
100 'CURRENT TIME :', 115 SY-UZEIT color 5 INVERSE.
WRITE: /10 'USERNAME :', 25 SY-UNAME COLOR 1 INVERSE,
100 'PAGE NO :', 113 SY-PAGNO COLOR 5 INVERSE.
WRITE: /10 'LOGON CLIENT :', 25 SY-MANDT COLOR 1 INVERSE,
100 'COLON N0 :', 114 SY-COLNO COLOR 5 INVERSE.
WRITE: /10 'CURRENT REPROT:', 25 SY-REPID COLOR 1 INVERSE,
100 'LANGUAGE :', 116 SY-LANGU COLOR 5 INVERSE.
ULINE.
ULINE /1(250).
write : /1 SY-VLINE, 2 'SALES DOC NO' color 6 inverse,
20 SY-VLINE, 21 'SALES DOC ITEM' color 6 inverse,
40 SY-VLINE,41 'MATERIAL NO' color 6 inverse,
60 SY-VLINE, 61 'SHORT SALES TEXT' color 6 inverse,
80 SY-VLINE, 81 'CUMM ORDER SALES' color 6 inverse,
100 SY-VLINE, 101 'CREDIT DATA' color 6 inverse,
120 SY-VLINE, 121 'CUSTOMER NO' color 6 inverse,
140 SY-VLINE, 141 'DOC DATE' color 6 inverse,
160 SY-VLINE, 161 'NET VALUE SALES' color 6 inverse,
180 SY-VLINE, 181 'SALES ORG' color 6 inverse,
210 SY-VLINE, 211 'CUSTOMER NAME' color 6 inverse,
230 SY-VLINE, 231 'CUSTOMER CONTY' color 6 inverse,
250 SY-VLINE.
ULINE /1(250).
END-OF-PAGE.
ULINE.
WRITE: /45 ' THIS IS END OF PAGE FOR SALES DOCUMENT DETAILS'
COLOR 6 .

Performance is too slow on SQL Azure box

Hi,
Performance is too slow on SQL Azure box (Located in Europe)
Below query returns 500,000 rows in 18 Min. on SQL Azure box (connected via SSMS, located in India)
SELECT * FROM TABLE_1
Whereas, on local server it returns 500,000 rows in (30 sec.)
SQL Azure configuration:
Service Tier/Performance Level : Premium/P1
DTU       : 100
MAX DB Size : 500GB
Max Worker Threads : 200
Max Sessions     : 2400
Benchmark Transaction Rate      : 105 transactions per second
Predictability : Best
Any suggestion would be highly appreciated.
Thanks,

Hello,
Can you please explain in a little more detail the scenario you testing? Are you comparing a SQL Database in Europe against a SQL Database in India? Or a SQL Database with a local, on-premise SQL Server installation?
In case of the first scenario, the roundtrip latency for the connection to the datacenter might play a role.
If you are comparing to a local installation, please note that you might be running against completely different hardware specifications and without network delay, resulting in very different results.
In both cases you can use the below blog post to assess the resource utilization of the SQL Database during the operation:
http://azure.microsoft.com/blog/2014/09/11/azure-sql-database-introduces-new-near-real-time-performance-metrics/
If the DB utilizes up to 100% you might have to consider to upgrade to a higher performance level to achieve the throughput you are looking for.
Thanks,
Jan

Sales Order / Forecasted Sale Order Report

hi
How to create Sales Order / Forecasted Sale Order Report.

Hi Raju,
Are you talking of normal sales order and in the Forecasted sale order report what are the inputs you are giving.

Sales order report

Hi,
What are the tables I should use for the following reports.
1. I want to create sales order status report for given sales office, sales group and creation date.
2. Open sales order report which covers all organizational levels, delivery status, invoice status shipping details and partner function details.
thanks in advance
with regards,
VC

For 2nd Q, you can find the open sales orders in the same VBUK table.
Delivery status field is LFSTK.
Invoice status field is RELIK
The partner information is available in Sales Document: Partner table VBPA.

Credit Block released Sales order report

Hi Experts,
My client is given few sales orders (around 4)no and requesting us, to prepare the credit block released sales orders report (include released person user ID).
*.No change logs is existing for all sales order and deliveries.
For above requirement I am using CDHDR table data but I am not getting credit block released sales order report.
Below fields I am using in CDHDR Table.
Change doc.Object (objectclas) : VERKBELEG
Document No (CHANGENR): Sales order no XXXXXXX
Transaction no (TCODE) : VKM1,VKM2,VKM3
Date(UDATE) : 25.09.2011 to 09.11.2011
Experts, Can you please help me out for this.
Thanking you!!!!
Regards,
Vijaykumar Kola
*.I'm already aware of this is a new development.

Try this, simple report... Here we check the new value of credit status field VBUK-CMGST and if it is 'D' we know that someone used VKM* transaction to release the document. Also you need to format the sales order number with leading zeros so it occupies all 10 digits and pass it to CDHDR-OBJECTID field (and not CHANGENR field). In the below code I am using select option for sales order number, so I know it will be formatted with leading zeros and so select on CDHDR will be successful.
*& Report ZTV_TEST
REPORT ztv_test.
TABLES: vbak, cdhdr.
SELECT-OPTIONS: s_saldoc FOR vbak-vbeln OBLIGATORY,
                s_udate FOR cdhdr-udate.
RANGES: r_objid FOR cdhdr-objectclas.
DATA: ls_cdhdr TYPE cdhdr,
      ls_cdpos TYPE cdpos.
IF NOT s_saldoc IS INITIAL.
LOOP AT s_saldoc.
    MOVE-CORRESPONDING s_saldoc TO r_objid.
    CONDENSE: r_objid-high, r_objid-low.
    APPEND r_objid.
ENDLOOP.
ENDIF.
CHECK NOT r_objid[] IS INITIAL.
SELECT *
INTO ls_cdhdr
FROM cdhdr
        WHERE objectclas = 'VERKBELEG' AND
              objectid IN r_objid AND
              udate IN s_udate AND
              tcode LIKE 'VKM%'.
SELECT SINGLE *
    INTO ls_cdpos
    FROM cdpos
      WHERE objectclas = ls_cdhdr-objectclas AND
            objectid = ls_cdhdr-objectid AND
            changenr = ls_cdhdr-changenr AND
            tabname = 'VBUK' AND
            fname = 'CMGST' AND
            value_new = 'D'.
IF sy-subrc = 0.
    WRITE:/ ls_cdhdr-objectid(10), ls_cdhdr-username,
            ls_cdhdr-udate, ls_cdhdr-utime.
ENDIF.
ENDSELECT.

Sales order report with order attachments

Hi All
I am writing a program for a 2 part report that gives a list of sales orders with attachment flags and a list of invoices that do not have the output processed due to the presence of attachment flag.
Firstly i need help regarding few queries in the process of writing this program.
1. How can i distinguish between a sales order with attachement and one without an attachment.
2. What is the related field for attachment in sales header/sales item table(s) or any other sales related table which will contain information of the attachment in the sales order.
3. If I have an attachment in sales order, will it have an effect in the output being processed for the invoice for that order.
Thanks in Advance
--Mike

Hello Erik,
is there a sales order report with the complete line-item pricing
breakdown. For example, In VA05 I'm only able to get the Net
Price and Net Value as an output. I would also like to view the
breakdown of the conditions (e.g. disounts, tax, etc.)
Is there another report in SAP that will show this? Or a backend
table I can pull this information from to create a query?
The best way to handle your requirement is to create a Custom report using the standard table for Sales Order i.e. VBAK and you can pick up the Document Condition Number. You can pass this number to table KONV and pull up all the values for the active contion type which was responsible for Sales Order price calculation. Please reach out to a ABAPer to develop this sort of a custom report.
Just FYI, if you want to check out all the value for a specific condition type, then you can use the standard report i.e. V/LD.
Please update your post after carrying out this exercise.
Regards,
Sarthak

Sales Order Report with Pricing Breakdown

HI, is there a sales order report with the complete line-item pricing breakdown. For example, In VA05 I'm only able to get the Net Price and Net Value as an output. I would also like to view the breakdown of the conditions (e.g. disounts, tax, etc.)
Is there another report in SAP that will show this? Or a backend table I can pull this information from to create a query?
Thanks, Erik

Hello Erik,
is there a sales order report with the complete line-item pricing
breakdown. For example, In VA05 I'm only able to get the Net
Price and Net Value as an output. I would also like to view the
breakdown of the conditions (e.g. disounts, tax, etc.)
Is there another report in SAP that will show this? Or a backend
table I can pull this information from to create a query?
The best way to handle your requirement is to create a Custom report using the standard table for Sales Order i.e. VBAK and you can pick up the Document Condition Number. You can pass this number to table KONV and pull up all the values for the active contion type which was responsible for Sales Order price calculation. Please reach out to a ABAPer to develop this sort of a custom report.
Just FYI, if you want to check out all the value for a specific condition type, then you can use the standard report i.e. V/LD.
Please update your post after carrying out this exercise.
Regards,
Sarthak

How to bring in the Open Sales Orders while performing Sales Order Conv

Hi,
Could you give some suggestions on the below:
How to bring in the Open Sales Orders while performing Sales Order Conversion in R12.
Thanks
Pravin

See http://ramugvs.wordpress.com/2011/08/27/how-to-stage-and-import-an-order-using-order-import-api-apps-wms-ebiz-11i-r12/
Sandeep Gandhi

Sales & Order report performance is too slow!

Similar Messages

Maybe you are looking for