Sales Order: Simulate Sales Order

Hi to all.
We are on SAP R3 46C version. I need to simulate SD order creation with deferent Terms of payment key in order lines. In 'BAPI_SALESORDER_SIMULATE' no Terms of payment key in line level. Any other way to do it?
Thanks,
Yuval Kaduri
Cellcom Israel.
Message was edited by: Yuval Kaduri
Message was edited by: Yuval Kaduri

Hi,
Check with the other BAPI, SD_SALES_DOCU_CHANGE_SIMULATE, this might help,
Rgds,

Similar Messages

Purchase order and sales order table name

hi al,
i want to know purchase order and sales order table name in abap.
thanks
varun
Moderator message: please do some own research, this should not take too long.
Edited by: Thomas Zloch on Jan 27, 2012

Hi Sunrag......
If your PO is linked with SO. Then you can fetch customer name easily by FMS in PO.
From there you ca gte the Customer Name into your PLD and it wont hang also.....
Regards,
Rahul

Production Order and Internal Order for each item of the sales order

Hi
   I am developing Make To Order Report where I have to display the MTO Line Items and non MTO Line Items. For non MTO Line Items I have to display Internal order with Planned and Actual Costs and also Production Order with Planned and Actual Costs. Could anybody tell how to get the Internal order no and production order with Planned and Actual costs for each line item for a sales order.
Thanks
Naga

Hi,
You can get the Production orders, Planned orders, Internal orders generated for Sales order item from AFPO table (use fields KDAUF-Sales order number & KDPOS-Sales order item). Then to identify the order type use order category (AUTYP) from table AUFK.
Once you have the Production/internal order, you can ge the cost from COSS and COSP table. Use the object number from AUFK to get the cost entries from COSS & COSP.
You can use the following sample code as reference.
Hope this is helps.. (Don't forget to mark it... )
Form GET_COSTS                                                       *
Get the material cost, labour hours and the labour cost for the      *
sales order material.                                                *
There are no interface parameters to be passed to this subroutine.   *
FORM GET_COSTS.
DATA V_OBJNR LIKE AUFK-OBJNR.
DATA v_menge LIKE vbap-kwmeng.
SELECT SINGLE OBJNR
    INTO V_OBJNR
    FROM AUFK
   WHERE AUFNR EQ AFPO-AUFNR.
SELECT * FROM COSS
   WHERE OBJNR EQ V_OBJNR
     AND WRTTP IN ('01', '04'). " p_wrttp. "Labour Cost ( Plan, Actual)
    PERFORM GET_VALUES_FROM_COSS.
ENDSELECT.
SELECT * FROM COSP
   WHERE OBJNR EQ V_OBJNR
     AND WRTTP IN ('01', '04')         " p_wrttp
     AND KSTAR NE '0000510033'. " EQ p_kstar2.      "Material Cost
    PERFORM GET_VALUE_FROM_COSP.
ENDSELECT.
Get the unit cost of the production order by dividing the production
cost by the order quantity. The result will be multiplied by the
GL posting qunatity (Delivery quantity) to get the production cost
for the quantity being deluivered.
IF NOT AFPO-PSMNG IS INITIAL.
    OUT_REC-LABOUR_HOURS_ACT = OUT_REC-LABOUR_HOURS_ACT / AFPO-PSMNG.
    OUT_REC-ADDNL_LABOUR_HOURS_ACT =
                      OUT_REC-ADDNL_LABOUR_HOURS_ACT / AFPO-PSMNG.
    OUT_REC-LABOUR_HOURS_PLN = OUT_REC-LABOUR_HOURS_PLN / AFPO-PSMNG.
    OUT_REC-ADDNL_LABOUR_HOURS_PLN =
                     OUT_REC-ADDNL_LABOUR_HOURS_PLN / AFPO-PSMNG.
    OUT_REC-LABOUR_COST_ACT = OUT_REC-LABOUR_COST_ACT / AFPO-PSMNG.
    OUT_REC-ADDNL_LABOUR_COST_ACT =
                     OUT_REC-ADDNL_LABOUR_COST_ACT / AFPO-PSMNG.
    OUT_REC-LABOUR_COST_PLN = OUT_REC-LABOUR_COST_PLN / AFPO-PSMNG.
    OUT_REC-ADDNL_LABOUR_COST_PLN =
                     OUT_REC-ADDNL_LABOUR_COST_PLN / AFPO-PSMNG.
    OUT_REC-MATERIAL_COST_ACT = OUT_REC-MATERIAL_COST_ACT / AFPO-PSMNG.
    OUT_REC-ADDNL_MATERIAL_COST_ACT =
                     OUT_REC-ADDNL_MATERIAL_COST_ACT / AFPO-PSMNG.
    OUT_REC-MATERIAL_COST_PLN = OUT_REC-MATERIAL_COST_PLN / AFPO-PSMNG.
    OUT_REC-ADDNL_MATERIAL_COST_PLN =
                     OUT_REC-ADDNL_MATERIAL_COST_PLN / AFPO-PSMNG.
ENDIF.
Multiply the calculated Unit Production costs with the GL quantity to
get the actual production cost of the quantity delivered.
Calculation for Labour Hours
OUT_REC-LABOUR_HOURS_ACT = OUT_REC-LABOUR_HOURS_ACT *
                             OUT_REC-QUANTITY.
OUT_REC-ADDNL_LABOUR_HOURS_ACT = OUT_REC-ADDNL_LABOUR_HOURS_ACT *
                             OUT_REC-QUANTITY.
OUT_REC-LABOUR_HOURS_PLN = OUT_REC-LABOUR_HOURS_PLN *
                             OUT_REC-QUANTITY.
OUT_REC-ADDNL_LABOUR_HOURS_PLN = OUT_REC-ADDNL_LABOUR_HOURS_PLN *
                             OUT_REC-QUANTITY.
Calculation for Material Cost
OUT_REC-MATERIAL_COST_ACT = OUT_REC-MATERIAL_COST_ACT *
                              OUT_REC-QUANTITY.
OUT_REC-ADDNL_MATERIAL_COST_ACT =
      OUT_REC-ADDNL_MATERIAL_COST_ACT * OUT_REC-QUANTITY.
OUT_REC-MATERIAL_COST_PLN = OUT_REC-MATERIAL_COST_PLN *
                              OUT_REC-QUANTITY.
OUT_REC-ADDNL_MATERIAL_COST_PLN =
      OUT_REC-ADDNL_MATERIAL_COST_PLN * OUT_REC-QUANTITY.
Calculation for Labour cost
OUT_REC-LABOUR_COST_ACT   = OUT_REC-LABOUR_COST_ACT *
                               OUT_REC-QUANTITY.
OUT_REC-ADDNL_LABOUR_COST_ACT = OUT_REC-ADDNL_LABOUR_COST_ACT *
                              OUT_REC-QUANTITY.
OUT_REC-LABOUR_COST_PLN   = OUT_REC-LABOUR_COST_PLN *
                              OUT_REC-QUANTITY.
OUT_REC-ADDNL_LABOUR_COST_PLN = OUT_REC-ADDNL_LABOUR_COST_PLN *
                              OUT_REC-QUANTITY.
Get the planned material cost from the total of the planned cost of
the component materials in the production order confirmations.
SELECT BWART MENGE MATNR SHKZG FROM AUFM
    INTO (AUFM-BWART, AUFM-MENGE, AUFM-MATNR, AUFM-SHKZG)
   WHERE AUFNR EQ AFPO-AUFNR.
    CHECK AUFM-BWART NE '101'.
    READ TABLE I_MBEW WITH KEY MATNR = AUFM-MATNR
                               BWKEY = AFPO-DWERK.
    IF SY-SUBRC NE 0.
      SELECT MATNR BWKEY ZPLPR LPLPR PEINH
        FROM MBEW
        INTO I_MBEW
       WHERE MATNR EQ AUFM-MATNR
         AND BWKEY EQ AFPO-DWERK.
        APPEND I_MBEW.
      ENDSELECT.
    ENDIF.
    IF SY-SUBRC EQ 0.
      IF I_MBEW-ZPLPR NE 0.
        IF AUFM-SHKZG EQ 'H'.
          OUT_REC-PLANNED_MATERIAL_COST =
          OUT_REC-PLANNED_MATERIAL_COST +
                       ( I_MBEW-ZPLPR * AUFM-MENGE / I_MBEW-PEINH ).
        ELSE.
          OUT_REC-PLANNED_MATERIAL_COST =
          OUT_REC-PLANNED_MATERIAL_COST -
                       ( I_MBEW-ZPLPR * AUFM-MENGE / I_MBEW-PEINH ).
        ENDIF.
      ELSEIF I_MBEW-LPLPR NE 0.
        IF AUFM-SHKZG EQ 'H'.
          OUT_REC-CURRENT_MATERIAL_COST =
          OUT_REC-CURRENT_MATERIAL_COST +
                       ( I_MBEW-LPLPR * AUFM-MENGE / I_MBEW-PEINH ).
        ELSE.
          OUT_REC-CURRENT_MATERIAL_COST =
          OUT_REC-CURRENT_MATERIAL_COST -
                       ( I_MBEW-LPLPR * AUFM-MENGE / I_MBEW-PEINH ).
        ENDIF.
      ENDIF.
    ENDIF.
ENDSELECT.
Get the Future material cost per Unit by deviding the calculated
Future material cost above with the goods reciept quantity to, then
multiply the unit cost with the GL quantity to get the Future material
Cost for the Quantity delivered. (Quantity in the entery from GLPCA
Table).
IF NOT AFPO-WEMNG IS INITIAL.
    OUT_REC-PLANNED_MATERIAL_COST =
       OUT_REC-PLANNED_MATERIAL_COST / AFPO-WEMNG * OUT_REC-QUANTITY.
    OUT_REC-CURRENT_MATERIAL_COST =
       OUT_REC-CURRENT_MATERIAL_COST / AFPO-WEMNG * OUT_REC-QUANTITY.
ENDIF.
ENDFORM.                               " GET_COSTS
Form GET_VALUE_FROM_COSP                                             *
Get the Material cost from COSP table.                               *
There are no interface parameters to be passed to this subroutine.   *
FORM GET_VALUE_FROM_COSP.
FIELD-SYMBOLS: <FS> TYPE ANY.
DATA: V_COMPONENT TYPE I.
Cummulate the posting values of all the 16 period buckets as to get
total production order cost. This is to handle the aprtial posting of
prodction order values in diffrent periods.
V_COMPONENT = 15.
DO 16 TIMES.
    ADD 1 TO V_COMPONENT.
    ASSIGN COMPONENT V_COMPONENT OF STRUCTURE COSP TO <FS>.
    IF COSP-WRTTP EQ '04' AND COSP-KSTAR EQ P_KSTAR2.
      ADD <FS> TO OUT_REC-MATERIAL_COST_ACT.
    ELSEIF COSP-WRTTP EQ '04'.
      ADD <FS> TO OUT_REC-ADDNL_MATERIAL_COST_ACT.
    ELSEIF COSP-WRTTP EQ '01' AND COSP-KSTAR EQ P_KSTAR2.
      ADD <FS> TO OUT_REC-MATERIAL_COST_PLN.
    ELSEIF COSP-WRTTP EQ '01'.
      ADD <FS> TO OUT_REC-ADDNL_MATERIAL_COST_PLN.
    ENDIF.
ENDDO.
ENDFORM.                               " GET_VALUE_FROM_COSP
Form GET_VALUES_FROM_COSS                                            *
Get the Labour cost and Labour hours from the COSS table.            *
There are no interface parameters to be passed to this subroutine.   *
FORM GET_VALUES_FROM_COSS.
FIELD-SYMBOLS: <FS1> TYPE ANY,
                 <FS2> TYPE ANY.
DATA: V_COMPONENT1 TYPE I,
        V_COMPONENT2 TYPE I.
Cummulate the posting values of all the 16 period buckets as to get
total production order cost. This is to handle the aprtial posting of
prodction order values in diffrent periods.
V_COMPONENT1 = 15.
V_COMPONENT2 = 111.
DO 16 TIMES.
    ADD 1 TO: V_COMPONENT1, V_COMPONENT2.
    ASSIGN COMPONENT V_COMPONENT1 OF STRUCTURE COSS TO <FS1>.
    ASSIGN COMPONENT V_COMPONENT2 OF STRUCTURE COSS TO <FS2>.
    IF COSS-WRTTP EQ '04' AND COSS-KSTAR EQ P_KSTAR1.
      ADD <FS1> TO OUT_REC-LABOUR_COST_ACT.
      ADD <FS2> TO OUT_REC-LABOUR_HOURS_ACT.
    ELSEIF COSS-WRTTP EQ '04'.
      ADD <FS1> TO OUT_REC-ADDNL_LABOUR_COST_ACT.
      ADD <FS2> TO OUT_REC-ADDNL_LABOUR_HOURS_ACT.
    ELSEIF COSS-WRTTP EQ '01' AND COSS-KSTAR EQ P_KSTAR1.
      ADD <FS1> TO OUT_REC-LABOUR_COST_PLN.
      ADD <FS2> TO OUT_REC-LABOUR_HOURS_PLN.
    ELSEIF COSS-WRTTP EQ '01'.
      ADD <FS1> TO OUT_REC-ADDNL_LABOUR_COST_PLN.
      ADD <FS2> TO OUT_REC-ADDNL_LABOUR_HOURS_PLN.
    ENDIF.
ENDDO.
ENDFORM.                               " GET_VALUES_FROM_COSS

Planned Order creation for Sales Order and Purchase Order

Hi
We have a following requirement.
In normal scenario when we have demand for material which was created by MD61 and in addition to that if there is Sales Order the 1st planned order gets revised.To better expalin this consider possible scenario
You create plan via MD61 for 200 qty .The system creates Planned Order for 200.
Now there is Sales Order for 150 peices.Then what happens is original Planed Order of 200 is changed to 50 and another planned order is created for 150 peices.The requirement is not summed.
Now in new scenario instead of Sales Order there is Intercompany Purchase Order of 150 peices.
Now the system is not changing original Planned Order of 200,but it created another planned order of 150.So now there are 2 Planned Orders of 150 and 200.
What I want to know is there any way wherein the system will reduce the original planned order (similar to Sales Order scenario)
Regards

Hi,
Use Strategy 52 in urs case.
PIR witll be created .
None convertable planned order will be created.
Once you get sales order for that material.
New planned order will be created which will consume PIR( planned order ).
Eg.
PIR 10.
Planned order 10 qty.
Sales oder 6
Planned order for SO 6 qty
Planned order through pir will become 4 qty.
Regards,
Vishal

Fields required for linking production order with sales order

I need to link production order and sales order to get the part no#. need to see in md04.

The link between production order and sales order can be made by using the KDAUF KDPOS fields of AUFK or AFPO and linking them to VBELN and POSNR of VBAP.
Regards,
Rich Heilman

Open Sales Balance on Sales order

Hi SAP Group -
I have a couple questions about the settlement of manufacturing variance to COPA.
When our settlement process is complete (production order and sales order both settled to COPA), there is a balance remaining on the sales order cost report which is equal to the manufacturing variance on the production order.
It seems that the manufacturing variance is posting from the production order to the sales order, but is not being assigned to the PSEG and flowing to COPA.
I am looking for advice in two areas:
First, how do we "clear" these balances on old orders that are already settled?
Second, how do we prevent this from happening on future orders?

Refer to OSS 183250 and note 186485.
If you dont specify in the settlement profile for the production order that the variances are not transferred from the production order into CO-PA, you will settle the variances to <b>CO-PA twice</b>: once from the production order (broken down into variance categories), and once from the sales order item. The settlement rule still references the material and not the sales order item.
Special Features of Product Cost by Sales Order with Valuated Sales Order Stock
<a href="http://help.sap.com/erp2005_ehp_02/helpdata/en/90/ba66cc446711d189420000e829fbbd/content.htm">Read the topic on 'Special Features of Product Cost by Sales Order with Valuated Sales Order Stock'</a>
You may want to check the period of the variance settlement from mfg order to sales order and ensure the settlement of sales order is also done the same period, if the type is PER.

Open sales order and back orders

hi ,
what is the difference between open sales order and back orders?
thanks
ganesh

Hi Ram,
A open sales order is the one which is not yet delivered that means u have only created a sales order and saved it( create a sales order, save it and see the document flow, the order shows as open)
Back order is also an order which is not completely fulfilled. may be because of the target quantity or because of not meeting the requested delivery date.
in this case you will pull back the required quantity from other sales order(open sales orders) this is done using T.Code CO06.
cheers,
anil.

Sales Order / Forecasted Sale Order Report

hi
How to create Sales Order / Forecasted Sale Order Report.

Hi Raju,
Are you talking of normal sales order and in the Forecasted sale order report what are the inputs you are giving.

Settlement of Sale Order to Sale Order

Dear experts
I need help in the following scenario:
At my client place we are doing job work for external material. All the material are supplied by the customer and our client will do the processing and send it back to customer's customer on customers request.
To create Excise Invoice against the Customers Customer we are handling through 2 sale orders.
First One Sale order will be created against the Customer Order and Sale price will be the selling price of Customers to Customer.
Second Sale Order will be created for Job Work Charges for the processing the materials.
On settling the process orders all the cost is settling to Sale Order One, Clients revenue is coming from Sale Order Two.
Here I need to settle the First Sale Order to Second Sale Order. I have given the second sale Order number in first sale order number in Settlement rule.
But when I settle the First sale Order all the amount it going to Price Differance Account.
How to settle the Cost of First Sale Order to Second Sale Order?
Regards
Kiran A

Dear Experts
any advises.
Can I go for Sale Order to Sale Order Settlement ?
Regards
Kiran

WBS element , Production Order and Sales Order Link

HI,
I have to get the name of the customer mentioned in the sales order. In Sales order line item assignment WBS element has been assigned as this is a sales order for customer specific.
Now I am doing MRP run against WBS element and getting the planned order.
After that i am doing Conversion of planned order into production Order with transaction code MD04.
In the production order, Assignment tab WBS element is showing.
My query is that against the WBS element and that particular production order how can i trace sales order as well as the customer name.
Note: The WBS element can be assigned to more than one sales Order line item.

Asutosh Mahapatra,
Since each production order is created for 1 unique Sale order number you should see the sale order number on the header screen in production order ( General data tab). Also customer number & name will appear there.
Hope this helps. Else please come back.
Thanks,
Ram

Quantity and Price Totals on Sale Order and Delivery Order

Dear ABAP Gurus,
I want to add totals of line items (Quantity and Price) in sale order and delivery order screens. Can you please guide me how to do this. The price can be any from pricing procedure ie exclusive or inclusive price of sales tax.
regards,
RSA
Moderator message : Requirements dumping not allowed, show the work you have already done, thread locked.
Edited by: Vinod Kumar on Jan 28, 2012 9:23 PM

Hi,
Try this :
IF @transaction_type in ('A','U') AND (@OBJECT_TYPE='22')
BEGIN
If exists (SELECT t3.docentry FROM OWOR T0 INNER JOIN WOR1 T1 ON T0.DocEntry = T1.DocEntry left join POR1 T2 on T2.[U_JONum] = T0.[OriginNum] and T0.[ItemCode] = t2.U_SubConItem] INNER JOIN OPOR T3 ON T2.DocEntry = T3.DocEntry WHERE T1.[PlannedQty] <> T2.[Quantity] and T1.[ItemCode] = 'subcon' and T3.DocEntry = @list_of_cols_val_tab_del )
Begin
SET @error = 10
SET @error_message = 'Not allowed to add more than planned'
End
End
Thanks & Regards,
Nagarajan

Convert Sale order to Planned order in PPDS

I have nearly 400 Open sale orders to be uploaded in R/3 with some 6000-7000 line items,which needs to be converted to Planned order and subsequently to Production order in APO-PPDS .
I tried using tcode RRP3 at all stages(Multi Level ), which is manual and time taking job.Is there any way to automate RRP3??
I also tried via RRP2 by Sale order which is again a manual job.
Can anybody suggest the correct method with FM/BAPI sequence.I also tried CDPSB0 and then RRP7, BUT because there is no field for quantity, the planned orders are created based on PDS, which does not match my requirement.
Awaiting for the reply...

Nawal,
Sales orders are not 'converted' to planned or production orders. Sales orders are demand, planned orders are supply. They are different objects with different purposes.
You mention that your PDS is not suitable. Creating large numbers of orders using non-PDS compliant master data can cause future consistency problems for these orders.
Exactly what do you wish to do, that cannot be done with the standard tools /SAPAPO/CDPS80 and /SAPAPO/RRP7?
Best Regards,
DB49

Sales Order processing - Sale from stock

Dear Gurus,
What are the configuration steps involved in Sales Order Processing- Sales from Stock.
Kindly let me know.
Regards
Prashant Ranalkar

Go with Make To Stock scenario. For configuration details, make a search in this forum.
thanks
G. Lakshmipathi

SAP Tables for Open Customer Orders and Sales History

Dear Experts.
I am looking to get SAP SD related tables for the following,
1) SAP tables for Open Customer Orders
From SAP, I need to get all tables that Contain all open customer orders for products.
2) Sales History
From SAP, I need to get all tables that contain the previous month's sales history (shipped customer orders).
Please Help!!

hi
check the following link
http://www.erpgenie.com/abap/tables_sd.htm
hope it will help you
regards,
sreelatha gullapalli

Purchase orders and Sale Orders in DEV and PRD

Hi SAP Experts,
We have a facing some different problem. Unfortunately our clint do some transactions in Development Server. Like Purchase orders and Sales Orders.
After one month we delivery to clinet exact Production server. But he is asking , What ever the purchase orders and Sales Orders Created in Development with same numbers and Same dates, that data will be present in Production server also. Is it possible to do that. IF possible how to do that...
Thanks and Regards
Siri....
Edited by: Alvaro Tejada Galindo on Apr 14, 2008 5:56 PM

I think it is possible,as per my knowlwdge our perious client regularly( means every 3-4 months) copied the data from Production server to quality server. by the help of basic person...
So in your case you want to copied the data from devlopment server to production server....please touch with your basic guy, i think he will help out reagrding this...

Sales Order: Simulate Sales Order

Similar Messages

Maybe you are looking for