SalesForce BizTalk 2013 Integration

Hi there,
I'm playing with BizTalk and SalesForce, trying to figure out what would be the best approach to the problem of integration of these two systems.
Up to this moment I have figured out that there is a Windows Azure Service Bus approach, with Service Bus acting as a relay between SF and on premises BT2013 as well as the MSMQ approach.
Could anyone recommend any of these solution as better ?
What makes me concerned about MSMQ is - I've read somewhere that it becomes outdated. For example the MSMQT transport is deprecated in BT2010 and higher.
However the Azure Service Bus approach makes me worried about the long term costs of the solution. Is the data transfer going through that Service Bus ? And what would the cost of that be in a long run inc case we need to trasfer 1GB of data every year/moth/week?
Thanks in advance.

HI,
can you help me to get the data from saleforce to Biztalk with out using Windows Azure. I got the code snippet from MSDN to fetch the data when workflow action is triggered in Salesforce oubound message is sent to Biztalk, but using windows azure account
I need the same but with out windows azure.
My requirement is same but I dont want to use the WindowsAzure account
Here is the MSDN code
http://code.msdn.microsoft.com/Integrating-BizTalk-Server-f31e4286

Similar Messages

Biztalk 2013 integration with CRM 2015

Hi,
I am working on a BizTalk 2013 integration with CRM 2015 on premise server and currently developing a POC to see how it works. There are quite a few good articles on BizTalk-CRM integration and I am referring them while building this POC. However I thought
of taking expet’s advice for this. Here are my requirements as of now.
Search CRM contacts by Fname, Lname etc.. And definitely not by Contact ID which is GUID. In this case BizTalk can expect responses like Single contact, Multiple contacts, Contact Not found or soap fault.
Create a single contact record in CRM from BizTalk.
Update Contact details in CRM like multiple addresses for a single contact.
So we have 2 approaches to integrate CRM, using untyped soap endpoint or CRM SDK.
I did an orchestration today with soap endpoint for “Retrieve” operation bypassing a GUID and can see the response returned. But how to pass the fname, lname etc. instead of GUID as there are no fields to populate in the soap Retrieve schema?
Is it wise decision to use untyped soap UI instead of CRM SDK proxy by keeping the above 3 requirements in mind?
Using SOAP endpoint, how can achieve the requirement 1 that returns multiple contacts?
I have seen articles using Query and Fetch to get multiple contacts and I really don’t understand it. Is it the only way to get multiple contacts?
Thanks!
JB

Hi Abhishek,
While exploring the CRM REST capabilities i found the below content on MSDN that says the REST endpoint works only for getting the contact by uniqueID and not by firstname and lastname etc...
https://msdn.microsoft.com/en-us/library/gg328090.aspx#BKMK_RetrievingRecords
Retrieving records
HTTP GET is used when you are retrieving records. When a unique identifier for
a specific record is provided, only that record will be retrieved. Otherwise, any system query options that are defined will be applied and up to 50 records will be retrieved that match any system query option filters.
We can't use a GUID as it is name search from customer website and GUID available at that stage.
So if it works only with GUID then we have to use either CRM SDK or SOAP enpoint right?
Cheers
JB

BizTalk 2013 Integration with JDE EnterpriseOne 9.1

Hi Guys,
I want to connect to JDE EnterpriseOne 9.1 using the out of box Enterprise JDE adapter provided by BizTalk.
I have done standalone installation of JDE EO on my machine.
I have gone through the tutorial and found that I would need Connector.jar, Kernel.jar and JDEDynAccess.jar.
However, I have found Connector.jar and JDEDynAccess.jar but somehow I don't see Kernel.jar in the installation folders of JDE EO.
Where should I get the specified file?
Thanks in advance...
Dhiraj Bhavsar

I hope I am not the only person on the planet who is trying to implement this solution (Integrating JDE using Adapter). :-(
Does BizTalk 2013/R2 support with JD Edwards EnterpriseOne 9.1?
Thanks & regards,
Dhiraj Bhavsar

SFTP Adapter Receive location does not work on BizTalk 2013

I am using SFTP 32 bit Adapter on BizTalk 2013 , I have provided proper credentials like user name and password, server name, port #......but the file is being not picked.
Iam dropping just 1 file at a time, but why doesn't it work ?
Please suggest
MBH

The Messaging Engine failed to add a receive location "corp.Integration.RP.SeTwoAxis_rcvPayad" with URL "sftp://dcla.sftp.xxxxcorp.com:22/users/mnopt_user/sereng/IN/*.txt" to the adapter "SFTP". Reason: "Microsoft.BizTalk.Adapter.SftpInvoker.SftpException:
List remote directory error.
   at Microsoft.BizTalk.Adapter.SftpInvoker.SftpInvoker.ListRemoteDirectory(String dirname)
   at Microsoft.BizTalk.Adapter.Sftp.SftpRLConfig.ValidateConfiguration(SftpReceivePropertyBag receivePropertyBag)
   at Microsoft.BizTalk.Adapter.Sftp.SftpRLConfig.CreateBinding(RHConfig rhConfig)
   at Microsoft.BizTalk.Adapter.Wcf.Runtime.BtsServiceHostBase.InitializeRuntime()
   at System.ServiceModel.ServiceHostBase.OnBeginOpen()
   at System.ServiceModel.ServiceHostBase.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfReceiveEndpoint.Enable()
   at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfReceiveEndpoint..ctor(BizTalkEndpointContext endpointContext, IBTTransportProxy transportProxy, ControlledTermination control)
   at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfReceiver`2.AddReceiveEndpoint(String url, IPropertyBag adapterConfig, IPropertyBag bizTalkConfig)".
MBH

How to configure Send Handler for BizTalk 2013 Dynamic Send Port on deployment?

Hi,
I do know how to manually configure a send handler for a dynamic send port in BizTalk 2013 Administration console. Though, once you export your application's configuration to a binding file, the dynamic send port's configuration does not
contain any information regarding the send handler. When you try to use this binding file when deploying your application your dynamic port's send handler falls back to the default host instance.
So my question is, how could we automate this process to avoid manual step in a dynamic port configuration during deployment?
Thank you,
--Vlad

Hey vlad,
As discussed at work in the office.. I woudl take the powershelll approach for now as a workaround. Here's a trivial script for my local dev box (all in one biztalk & SQL) (must be run in an x86 powershell session):
param
[string] $bizTalkDbServer = ".",
[string] $bizTalkDbName = "BizTalkMgmtDb",
[string] $fileHostInstance = "SendingHost",
[string] $sendPortName = "sm_dynamic_sp_test"
[System.reflection.Assembly]::LoadWithPartialName("Microsoft.BizTalk.ExplorerOM") | Out-Null
$catalog = New-Object Microsoft.BizTalk.ExplorerOM.BtsCatalogExplorer
$catalog.ConnectionString = "SERVER=$bizTalkDbServer;DATABASE=$bizTalkDbName;Integrated Security=SSPI"
foreach($sp in $catalog.SendPorts)
if($sp.Name -eq $sendPortName)
  "Found send port $($sp.Name), analyzing send handler"
  foreach($sh in $sp.DynamicSendHandlers)
   if($sh.SendHandler.TransportType.Name -eq "FILE")
    if($sh.SendHandler.Host.Name -ne $fileHostInstance)
     "Changing $($sh.Name) send handler to '$fileHostInstance' from '$($sh.SendHandler.Host.Name)'"
     $sp.SetSendHandler("FILE", $fileHostInstance)
    else
     "Send handler for $($sp.Name) is already '$fileHostInstance' ignorning .. "
$catalog.SaveChanges()

WCF-Custom Biztalk 2013 - Access to SQL Server 2014 Database

Hi,
i don't see nowhere of capability from the Biztalk adapter to access differente version of Sql server.
I want to send ou receive information with a WCF-Custom from SQL Server 2014, i'm in Biztalk 2013 (not R2 ) it's possible ?
Do you have a link or a list of version autorized to accessed by the wcf-custom Sql binging ?
Thanks a lot

Hi, I can suppose that the main problem for Joao is not if it works in general or not.
The real problem is that he is not sure if this configuration is officially supported by Microsoft.
If you are developing an integration project for a client you need to have this guarantee. If not, you can have an unsupported scenario, and if something fails you could have a big problem with your client.
If I were you, I would talk with the client account manager about this.
Regards.

BizTalk 2013 - BAMAlerts service crash

Hi,
I am deploying BizTalk into a new clean Production environment. My topology is the following:
- 2 SQL Server machines (clustered)
- 2 BizTalk application servers (with BTS runtime)
- 1 BAM server
I have everything deployed and working well except for the BAMAlerts service crashing a minute after it starts on the BAM server.
The software installed on the BAM server is:
Windows 2008 R2 x64
SQL Server 2012 SP1 x64 with the following features:
Reporting Services (Native)
SQL Server Data Tools
Client Tools Connectivity
Integration Services
Management Tools – Basic
Management Tools – Complete
SQL Server 2012 SP1 Cumulative Update 9
BizTalk Server 2013 x64 with the following features:
Portal Components
Business Activity Monitoring
Administrative Tools and Monitoring
Additional Software
Enterprise Single Sign-On Administration Module
Enterprise Single Sign-On Master Secret Server
BAM Alert Provider for SQL Notification Services
BAM Client
BAM-Eventing
Office Excel 2013 (x86)
Once the BizTalk binaries are installed I installed Windows Update suggested patches including the update for BizTalk Server 2013 (KB2830546).
I then went on and configured the relevant features. Configuration worked well but the BAMAlerts service crashes 1 minute after starting with the following error:
Microsoft.BizTalk.Bam.Management.BamManagerException: Encountered error while executing command on SQL Server "". ---> System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection
to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
I verified the following:
A database mail profile was created on the SQL Server instance and it works (I can use it to send emails)
Using the BAMAlerts service account I am able to connect to the SQL Server instance using Named Pipes or TCP/IP, call BizTalkMgmtDb.dbo.adm_Group_GetBAMServerAndDBName or query tables
I installed SQL Server 2005 Notification Services x64 in order to see if it helps but no success.
I installed BizTalk 2013 Cumulative Update 2 but it did no help either.
The worse part is that I hit the same issue when setting up our UAT environment, tried a number of things and ended up with a setup that works but I am not able to reproduce that success in Prod...
Following is the full error message:
Microsoft.BizTalk.Bam.Management.BamManagerException: Encountered error while executing command on SQL Server "". ---> System.Data.SqlClient.SqlException:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.BizTalk.Bam.Management.SqlHelper.ExecuteQuery(String cmdText, CommandType cmdType, Transaction transaction)
--- End of inner exception stack trace ---
at Microsoft.BizTalk.Bam.Management.SqlHelper.ExecuteQuery(String cmdText, CommandType cmdType, Transaction transaction)
at Microsoft.BizTalk.Bam.AlertHost.AlertHost.Run()
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Threading.ThreadHelper.ThreadStart()
Thanks
Emmanuel

Known issue, you need BizTalk Server 2013 CU1:
http://support.microsoft.com/kb/2838133/en-us
(See hotfix 2832137)
Morten la Cour

Microsoft BizTalk Adapters for Host Systems Missing with BizTalk 2013

Hi All,
I am using BizTalk 2013 and looking for Microsoft BizTalk Adapters for Host Systems but cannot find it on Installation disk.
Do any one has idea how to go ahead with this .
Thanks
Abhishek

Hi Abhishek,
As far as what we can experience, there is not standalone download for
BizTalk 2013 Adapters for Host Systems 2013. Its part of the
Host Integration Server 2013 installtion.
HIS 2013 installation
document’s official
“Existing Product Upgrade
This release supports an in-place upgrade of earlier versions of HIS. The Host Integration Server 2013 setup automatically
upgrades your existing configuration. The following releases are supported for automatic upgrade.
Host Integration Server 2009
BizTalk Adapters for Host Systems 2.0
When you run the installation setup for
Host Integration Server 2013, we will get the information like the following. In my server I already have
BizTalk Adapters for Host Systems 2.0 (as per the requirement),
hence this installation wizard tries to upgrade it to make it compactable with 2013.
When you proceed with the installation, this will install/upgrade the BizTalk adapter to 2013.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

BizTalk 2013 connectivity to CRM Dynamics 2013 Online

Hi,
For one of the upcoming integrations, out client is going for CRM Dynamics 2013 Online. We need to integrate legacy systems with CRM Dynamics 2013 Online. Since we do not have any adapter connectivity as of now from BizTalk 2013 to CRM Dynamics
2013 Online, when can we expect a new adapter for CRM Dynamics 2013 Online from Microsoft.
Thanks and Regards,
Ujjwal
-Ujjwal

Hi,
Please refer the information which maybe is helpfull:
#Dynamics CRM BizTalk Adapter
https://www.rssbus.com/biztalk/mscrm/
#Dynamics CRM Guide
http://www.dynamicscrmguide.com/biztalk-2013-to-crm-2011-integration/
Hope it can help you.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to connect to SAP DB2 server in Biztalk 2013

I have Biztalk 2013 server installed.I have installed all the adapters installed during the instllation wizard.
But I am not able to find the Db2 adapter in consume adapter metadata option.
Can someone suggest what i am missing ot how to consume it ?

Hi,
You can use Microsoft Host Integration Server 2010 or 2013 together with BizTalk 2013. I recommend you to use the latest version of Host Integration Server 2013 (HIS) because it also supports DB2 V10 and V11. As Host Integration Server is part of BizTalk,
you don't need an additional license if you run it on the same server.
Best Regards,
Steve Melan - BCEE My Blog : http://stevemelan.wordpress.com

Migration from Sybase EB to Biztalk 2013

One of our clients has a requirement to move from Sybase EB to Biztalk 2013. If anybody has performed such a migration in the past, can you please enlighten on the complexity and steps involved? Further, do share any knowledge articles around the scenario.
Thanks

I'm not familiar with Sybase EB but, it doesn't really matter.
It's very simple, there is no migration path from any integration platform to any other integration so what you're looking at is buildign a new BizTalk app. Which is actually a better since you can design for the current situation rather than any past
implementations.
If the app is using any standards based formats, ebXml, ACORD, cXml, those schemas would be reuable, but any mapping or business process would all be new. This isn't BizTalk specific in any way, you'd be in the same situation migrating to WebSphere
or mule.

Azure image - Biztalk 2013 R2 Enterprise

Hi
Can anybody explain why Biztalk 2013 R2 Enterprise isn't an available Azure image?
Thanks
Paul

The R2 developer edition has just been released couple of weeks. So I guess people at Microsoft are still working on getting those images sorted out.
Do you require specific features of the R2 edition? Otherwise you could go ahead with the 2013 Enterprise Image.
Glenn Colpaert - Microsoft Integration MVP - Blog : http://blog.codit.eu

BizTalk 2013 R2 - Oracle client connectivity

In integration of BizTalk 2013 R2 with Oracle database
1) is there only any particular version client that BTS 2013 R2 supports.
2) Do I need to know what version of Oracle db client is using before I install oracle client - (should support BTS2013 r2)
3) For example, client has older version of Oracle Db say 8g and if I install Oracle client 11g will that work with my BTS2013 R2 ?
4) Is it mandatory to always install both 32 bit and 64 bit client ?
MBH

Please follow the below steps (worked for me):
1-
You can install it by running setup available in
ODAC1110720.zip which can be downloaded from oracle site.
2-
Install ODAC1110720 on the new OracleClient home.
3-
Click
Next on Welcome screen
4-
Keep selecting
Oracle Client 11.1.0.7.20 version to install
5-
Keep selecting
Oracle Client 11.1.0.7.20 version to install
6-
Select
D:\app as Oracle Base where Oracle Client is installed on your system and click
Next:
7-
Keep the default port and click
Next to proceed:
8-
Click
Exit on successful installation
If this answers your question please mark as answer. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Migrate biztalk 2006R2/SQL server 2005 projects to Biztalk 2013/SQL server 2012

We have Biztalk application projects deployed on Biztalk 2006R2/SQL server 2005 environment on a single server
Now we have installed and configured Biztalk 2013/SQL server 2012 in a multicomputer environment where Biztalk server is on one computer while SQL server is on the other.
Now it's time to migrate the projects 2006R2 to 2013.. Is it a smooth process? I found a lot of posts about migration from 2006R2 to Biztalk 2010... Just wondering if it is similar or more complex?? Appreciate any help/suggestions.. thanks!!

Hi Annee,
Following article should answer your question:
BizTalk Application Migration Guide
Also have a look at following forum post:
http://social.msdn.microsoft.com/Forums/en-US/f9ac6b6c-3dbe-487b-85c5-448d257d62f4/migration-from-biztalk-server-2006-to-2013?forum=biztalkgeneral
Maheshkumar S. Tiwari|http://tech-findings.blogspot.in/

XSLT Debugger is disabled in Visual Studio 2013 Integrated Shell

According to this link, the Visual Studio 2013 Integrated Shell contains an XSLT Debugger:
https://msdn.microsoft.com/en-us/library/bb129445.aspx?f=255&MSPPError=-2147217396
I installed this version clean on a machine that has no prior Visual Studio installs.
When I launch this version of Visual Studio, and open an xsl file for debugging, the 'Start XSLT Debugging' option is grayed out / disabled.
How do I enable XSLT Debugging?
Thanks,
--gar

Hi,
You issue can be reproduce in my Visual Studio 2013 Integrated Shell as well. I think you can submit one feedback about this issue on Microsoft connect site:https://connect.microsoft.com/
Thanks.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

SalesForce BizTalk 2013 Integration

Similar Messages

Maybe you are looking for