SALV Class Grand Total With Text

Hi,
I am working on SALV Class. My requirement was to display ALV OUTPUT with Grand Total.
I am able to display the totals by using AGGREGATIONS, Now i want to display the Grand Total Text (i.e : Work Activity Total).
Can anyone know the valuble inputs and possibilites.
Thanks & Regards,
Srinivas Bhavanam.

Hi Martin,
Try to change *" minDigits="1" maxDigits="1"* values from 1 to 2.
It may help you.
Thanks,
Suresh.

Similar Messages

Grand Total with few NULL values in column.

Hi All,
In my requirement, I have few null values in the column and I have to show those null values as it is( can't use IfNull function).
Can I able to grand total in such scenerio..?
I am using OBIEE 11.1.1.3
Thanks,
Archie

HI Archie,
Are you using the "Grand Total" option that comes with the view?.I don't think there will be any issue , it will ignore the null values while calculating the total.
Rgds,
Dpka

Incorrect GRAND TOTAL (with COUNT DISTINCT)

Hi,
I'm getting wrong results in the GRAND TOTAL of a COUNT DISTINCT measure column.
I have 5 distinct customers in Paris and 10 distinct customers in NYC, I want the grand total to retrieve the sum of both, that's 15.
But OBIEE is calculating the distinct customers for all cities, so if there are customers in both Paris and NYC the result is wrong.
This is the result I'm getting:
City Number_Distinct_Customers
Paris 5
NYC 10
GRAND TOTAL 12
12 is the number of all the distinct customers.
The correct GRANT TOTAL should be 5+10=15
Thanks
Regards

So just as a weird question...from a business standpoint, what does the "15" mean?
It's not a count of distinct customers, which is what this measure is supposed to be.
If I were to come up with a business description for what's being described, it's "a count of distinct customers by city....summed up so that it is no longer a count of distinct customers". What and/or how exactly would anyone use such a number?
Not trying to be a pain, just trying to figure out how this would be used.
Thanks,
Scott

How to display subtotal and grand total with a top 10 condistion ?

Hello,
I would like to display a Top 10 list with subtotal for Top 10 and grand total for all the lines.
I succeed to display top 10 subtotal with "calculations/total" parameter but my question is How to display also the grand total for all the lines ?
Thank you in advance.
Best regards
Nicolas

Calculate Results/not defined gives grand total and calculation / total gives top 10 sum. As far as I know, you can't display both at the same time.

How to format the Grand Total with condition?

Dear All,
I found the XML for Total as below:
<saw:edgeLayer type="column" columnID="c523314f1e2a401c3">
<saw:levels>
<saw:level>
<saw:displaySubTotal id="t1" subTotalPosition="before">
<saw:memberFormat>
<saw:displayFormat>
<saw:formatSpec wrapText="true" borderColor="#999999" borderPosition="18"/></saw:displayFormat>
<saw:caption>
<saw:text>Total</saw:text></saw:caption></saw:memberFormat>
<saw:dataBodyFormat>
<saw:displayFormat>
<saw:formatSpec borderColor="#999999" wrapText="true"/></saw:displayFormat></saw:dataBodyFormat></saw:displaySubTotal></saw:level></saw:levels>
<saw:memberFormat>
<saw:displayFormat>
<saw:formatSpec height="25" wrapText="true" hAlign="center" vAlign="middle"/></saw:displayFormat></saw:memberFormat></saw:edgeLayer>
And I tried to use some conditional format since I want the Total for Ratio can be shown as 0.0 not 0. Thus, I tried to alter the XML by adding the condition to it.
<saw:edgeLayer type="column" columnID="c523314f1e2a401c3">
<saw:levels>
<saw:level>
<saw:displaySubTotal id="t1" subTotalPosition="before">
<saw:memberFormat>
<saw:displayFormat>
<saw:formatSpec borderColor="#999999" borderPosition="18" wrapText="true"/></saw:displayFormat></saw:memberFormat>
<saw:dataBodyFormat>
<saw:displayFormat>
<saw:formatSpec borderColor="#999999" wrapText="true">
<saw:dataFormat xsi:type="saw:number" minDigits="0" maxDigits="0" commas="true" negativeType="redParen"/></saw:formatSpec>
<saw:conditionalDisplayFormats>
<saw:conditionalDisplayFormat>
<saw:formatRule>
<saw:condition>
<sawx:expr xsi:type="sawx:comparison" op="equal">
<sawx:expr xsi:type="sawx:columnRefExpr" columnID="c881e0b4d32235233"/>
<sawx:expr xsi:type="xsd:string">Ratio</sawx:expr></sawx:expr></saw:condition>
<saw:formatSpec wrapText="true">
<saw:dataFormat xsi:type="saw:number" commas="false" negativeType="redParen" minDigits="1" maxDigits="1"/></saw:formatSpec></saw:formatRule></saw:conditionalDisplayFormat></saw:conditionalDisplayFormats></saw:displayFormat></saw:dataBodyFormat></saw:displaySubTotal></saw:level></saw:levels>
<saw:memberFormat>
<saw:displayFormat>
<saw:formatSpec height="25" wrapText="true" hAlign="center" vAlign="middle"/></saw:displayFormat></saw:memberFormat></saw:edgeLayer>
It shows some Error Message as "DXE compiler error. No table 'GTGT' found in DXE. Source name: DxeAPI. XML: None". It it possible to add some condition for Grand Total? If so, how I alter my XML??
Thanks a lot!!!
Best Regards,
Martin

Hi Martin,
Try to change *" minDigits="1" maxDigits="1"* values from 1 to 2.
It may help you.
Thanks,
Suresh.

Grand Total with Count Distinct

Hi,
I want to use grand total to count distinct my data,
I had physical map ActivityId into my fact and set count distinct to its aggregation rules.
then when i create my report the anwser is OK.(count distinct ActivityID). But in grandtotal is sum.
The aggregation Rules in BI Awnser is set it Default.
[Pic >> http://image.ohozaa.com/i/866/tablecountdisctinct.jpg ]
i don't know why , i try to set many thing but it isn't work
Thank ,Regard.
And sorry about my English Language.

couple of things required here..
how did you build this measure in rpd?
Is that physical mapped or logical mapped column(derived column)?
Map it as physically and apply aggregation rule on top of it to: CountDistinct
Now, pull the column in front-end it has to give you proper sub-total/total..
Or, Try putting the formula in front-end in fx of the column and try..

% is not getting correctly for the Grand Total Row in OBI10g

Hi,We have a report in table view with the following structure.
Name     Target     Act     %Ach
ABC     100     50     50
XYZ     200     10     5
Total     300     60     27.5
The value for the %Ach Total row should be 20% but in the report it is showing as 27.5.
any one observed this ,how to correct this??
Thanks

Hi,
To get grand total correctly..configure instanceconfig.xml and put..
<ReportAggregateEnabled>true</ReportAggregateEnabled> between <serverinstace>..
refer..
http://obiee101.blogspot.com/2009/09/obiee-grand-totals-with-calculated.html
Hope it solves ur problem

How to show Grand total values in Chart view....

Hi,
I have a crazy req. like i need to show grand totals values also on the chart view along with the normal metrics.
column Metric1 Metric2
AAA 10 20
BBB 30 15
CCC 20 15
TOTAL 60 50
so here i need the values 60 and 50 also also to be displayed in a line graph
cheers

Pretty simple to achieve :)
In your Pivot view, under Rows section where you have column dimensions like AAA,BBB etc...create a new calculated item say Grand Total with function as 'formula' and formula as sum(*). This will give you a new row with totals. Now Chart Pivoted Results and you are done.
Hope answered

Grand Total problem

I have grand total problem. This is my pivot table.
A B A/B
1 10 0,1
2 4 0,5
8 3 2,67
{color:#ff0000}11 17 _3,27_ GRAND TOTAL{color} (0,1+0,5+2,67)
A - AVG type
B - SUM type
How to make obi calculate grand total like this:
A B A/B
1 10 0,1
2 4 0,5
8 3 2,67
{color:#0000ff}11 17 _0,647_ GRAND TOTAL{color} (11/17)
Is that posssible?
Would it help to add *<ReportAggregateEnabled>true</ReportAggregateEnabled>*
in instanceconfig.xml?
Edited by: Micek on 2009.02.09 12:53

Conceptually Report Aggregate Enabled should work. Look into this blog article which refers same.
http://oraclebi.soundvoid.net/2008/10/grand-totals-with-calculated-columns-2/

Abap-alv grand totals

hi friends,
how to find alv grand totals with out subtotals.
for ex for subtotals we use do_sum,
like that what we use for grand totals with out subtotals.

Hi,
Do not pass the Sort table to ALV...pass X for the DO_SUM in the fieldcatalog for the field you want to have total.
g_fieldcat-tabname   = 'I_INA2011'.
g_fieldcat-fieldname = 'HRTOT'.
g_fieldcat-coltext   = 'Total Hours Work'(006).
g_fieldcat-do_sum    = 'X'.          " Pass this
APPEND g_fieldcat TO i_fieldcat.
CLEAR g_fieldcat.
* Calling method to display data.
    CALL METHOD g_alv_grid->set_table_for_first_display
      EXPORTING
        is_layout       = g_layout
        i_save          = 'A'
      CHANGING
        it_fieldcatalog = i_fieldcat
        it_outtab       = i_ina2011.

Grand Totals issue

Hi Gurus,
In My RPD we are using "Count Distinct" Aggregate rule for Facts and in Reports I am using Table level "Grand Total" Enable with "Report Based Total(When applicable)"option also checked...It is working fine for some days..but suddenly it is showing Different Grand totals..and as work around for this I changed Aggregation rule at report level to "Sum"...now it is showing correct values..so my question is Is my work around is correct or not because we used "Count Distinct" as aggregation Rule in RPD and in report level we changed it as "sum"...and also I observed Physical sql when using Grand totals it is summing the values like...sum(Count(distinct fact1))....and when i changed aggregation to "sum" at report level also it is summing the values like..sum(count(distinct fact1)..so please suggest, Is my work around is correct or am I doing any mistake like changing aggregation at report level to get grand total correct?
I am using 10.1.3.4.1...
I also studied in Release notes as it is a bug in this version for this they suggested work around to use<ReportAggregateEnabled>true</ReportAggregateEnabled> in <serverInstance>tag of instanceconfig file this also not working in my environment...

Hi,
I dont' think this is possible for the same measure in a pivot table. Maybe you can use this workaround:
- create an extra column for the measure with a calculation like:
CASE WHEN "Base Facts"."1- Revenue" = MAX("Base Facts"."1- Revenue" BY "Products"."P3 LOB") THEN MAX("Base Facts"."1- Revenue" BY "Products"."P3 LOB") ELSE 0 END
In this example I use the Revenue as the measure. I use the MAX BY function to calculate the MAX value per Product Lob (subtotals per Product Lob in my example). If the max value per product lob is equal to the revenue then the Max value is displayed and otherwise o.
Add this extra measure to the pivot table and add the grand total with aggregate rule = SUM. If you don't want to see the grand total for the original measure select None instead.
Hope this helps. I have a screenshot as well but then I need your emailadress.
Kind regards,
Quinten

Grand Total Text is not printing in ALV

Hi all,
I am not able to print Grand Total text in my report
I am not doing subtotal, i am using only grand totals.
So i have used in the following way
WA_FIELDCAT-DO_SUM        = GC_X.
GS_LAYOUT-TOTALS_ONLY       = GC_X.
GS_LAYOUT-TOTALS_TEXT       = 'Totals'(049).
i am using using ALV GRID DISPLAY FM...its displaying the total amount, buts text is missing...
Can any one tell me what else i have to pass in the layout or fieldcatlog or FM

Hi AMR,
If you use REUSE_ALV_GRID_DISPLAY function module, i think Total text does not come .but if u use REUSE_ALV_LIST_DISPLAY function module Total text comes .
Check this sample program it let u know ..
"Types
TYPES:
      BEGIN OF t_pa0008,
        pernr TYPE pa0008-pernr,
        lga01 TYPE pa0008-lga01,
        bet01 TYPE pa0008-bet01,
      END OF t_pa0008.
"Work areas
DATA:
      w_pa0008 TYPE t_pa0008.
"Internal tables
DATA:
      i_pa0008 TYPE STANDARD TABLE OF t_pa0008.
PARAMETERS:
           list TYPE c RADIOBUTTON GROUP gr1,
           grid TYPE c RADIOBUTTON GROUP gr1.
" ALV Declarations
" Types Pools
TYPE-POOLS:
   slis.
" Types
TYPES:
   t_fieldcat         TYPE slis_fieldcat_alv,
   t_events           TYPE slis_alv_event,
   t_layout           TYPE slis_layout_alv,
   t_sort             TYPE slis_sortinfo_alv,
   t_keyinfo          TYPE slis_keyinfo_alv.
" Workareas
DATA:
   w_fieldcat         TYPE t_fieldcat,
   w_events           TYPE t_events,
   w_sort             TYPE t_sort,
   w_layout           TYPE t_layout,
   w_keyinfo          TYPE t_keyinfo.
" Internal Tables
DATA:
   i_fieldcat         TYPE STANDARD TABLE OF t_fieldcat,
   i_events           TYPE STANDARD TABLE OF t_events,
   i_sort             TYPE STANDARD TABLE OF t_sort.
START-OF-SELECTION.
PERFORM get_data.
END-OF-SELECTION.
PERFORM build_fieldcatalog.        "Fieldcatalog
PERFORM build_events.              "Events table
PERFORM buid_layout.               "Layout structure.
PERFORM build_sort_tab.            "To sort table and get subtotal
PERFORM display_data.
*&      Form get_data
FORM get_data.
DATA:l_0008 TYPE pa0008 OCCURS 0 WITH HEADER LINE.
SELECT pernr lga01 bet01
    FROM pa0008
    INTO CORRESPONDING FIELDS OF l_0008
    WHERE begda LE sy-datum
      AND endda GE sy-datum.
    w_pa0008-pernr = l_0008-pernr.
    w_pa0008-lga01 = l_0008-lga01.
    w_pa0008-bet01 = l_0008-bet01.
    APPEND w_pa0008 TO i_pa0008.
    CLEAR w_pa0008.
    w_pa0008-pernr = l_0008-pernr.
    w_pa0008-lga01 = l_0008-lga02.
    w_pa0008-bet01 = l_0008-bet02.
    APPEND w_pa0008 TO i_pa0008.
    CLEAR w_pa0008.
    w_pa0008-pernr = l_0008-pernr.
    w_pa0008-lga01 = l_0008-lga03.
    w_pa0008-bet01 = l_0008-bet03.
    APPEND w_pa0008 TO i_pa0008.
    CLEAR w_pa0008.
    w_pa0008-pernr = l_0008-pernr.
    w_pa0008-lga01 = l_0008-lga04.
    w_pa0008-bet01 = l_0008-bet04.
    APPEND w_pa0008 TO i_pa0008.
    CLEAR w_pa0008.
ENDSELECT.
ENDFORM.                    "get_data
*&      Form build_fieldcatalog
FORM build_fieldcatalog.
PERFORM build_fcat USING:
                "Field    Int.Table    Text
                 'PERNR' 'I_PA0008'   'PERNR', "Remove this if u dont want in the item table as well as it is there in the header table
                 'LGA01' 'I_PA0008'   'LGA01',
                 'BET01' 'I_PA0008'   'BET01'.
ENDFORM.                    "build_fieldcatalog
*&      Form build_events
*       text
FORM build_events.
CLEAR:
        w_events, i_events[].
w_events-name = 'TOP_OF_PAGE'.
w_events-form = 'TOP_OF_PAGE'.
APPEND w_events TO i_events.
CLEAR w_events.
ENDFORM.                    "build_events
*&      Form display_data
*       text
FORM display_data.
DATA:
        l_program TYPE sy-repid VALUE sy-repid,
        l_fm      TYPE RS38L_FNAM.
IF list = 'X'.
    l_fm = 'REUSE_ALV_LIST_DISPLAY'.
ELSEIF grid ='X'.
    l_fm = 'REUSE_ALV_GRID_DISPLAY'.
ENDIF.
CALL FUNCTION l_fm
    EXPORTING
      i_callback_program = l_program
      is_layout          = w_layout
      it_fieldcat        = i_fieldcat
      it_events          = i_events
      it_sort            = i_sort
    TABLES
      t_outtab           = i_pa0008.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    "display_data
*&      Form build_fcat
FORM build_fcat USING l_field l_tab l_text.
w_fieldcat-fieldname = l_field.
w_fieldcat-tabname   = l_tab.
w_fieldcat-seltext_m = l_text.
IF l_field = 'BET01'.
    w_fieldcat-do_sum = 'X'.
ENDIF.
APPEND w_fieldcat TO i_fieldcat.
CLEAR w_fieldcat.
ENDFORM.                    " build_fcat
*&      Form top_of_page
*       text
FORM top_of_page.
DATA :
i_header TYPE slis_t_listheader,
w_header LIKE LINE OF i_header.
DATA:l_date1 TYPE datum,
       l_date2 TYPE datum.
w_header-typ = 'S'.
w_header-info = sy-title.
APPEND w_header TO i_header.
CLEAR w_header.
w_header-typ = 'H'.
w_header-info = sy-repid.
APPEND w_header TO i_header.
CLEAR w_header.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = i_header
      i_logo             = 'ENJOYSAP_LOGO'.
ENDFORM.                    "top_of_page
*&      Form BUILD_sort_tab
FORM build_sort_tab .
CLEAR :i_sort[],w_sort.
w_sort-spos      = 1.
w_sort-fieldname = 'PERNR'.
w_sort-tabname   = 'I_PA0008'. "header table
w_sort-up        = 'X'.
w_sort-subtot    = 'X'.
APPEND w_sort TO i_sort.
CLEAR w_sort.
ENDFORM.                    " BUILD_sort_tab
*&      Form buid_layout
FORM buid_layout .
w_layout-totals_text = 'Total'.
w_layout-subtotals_text = 'S.Total'.
ENDFORM.                    " buid_layout
Regards,
Venkat.O

Printing Grand Totals in Footer along with page total

Hi
I have a report which prints PO Header and PO Lines. For each page while iterating thru PO Lines I print page total in the footer.
Once all PO Lines are printed with page totals in the footer of each page, I want to print Grand total in the last page in the footer along with last page total. Currently my XML data has pre-computed grand total in the PO Header block.
The problem
I have wrapped header and lines inside <?start:body?> and <?end:body?> which allows me to print page totals outside the <?end:body?> tag.
I print page totals and "Continue" next to it in the footer. But
Finally when grand total comes into picture in the outer loop I want to replace "Continue" text with grand total value in the last page and print it as footer.
I tried to use xdoxlt:set_variable() function to flag a variable value to 1 when iteration happens in HEADER block and set it to 2 in inner loop of lines block. But the scope of the variable is confined between <?start:body?> and < ?end:body? and is not visible outside the <?end:body?> tag.
The logic I want to accomplish is
if var = 1 then
print page total and "Continue"
elsif var = 2 then
print page total and Grand Total.
end if
This logic doest work as the value of var is not visible outside the body tag.
I want to use this variable value to print footer which lies outside <?end:body?> tag with grand totalor page total
Please suggest if there is any other way I can accomplish this functionality. Can we use parameter and update it. Syntax for update parameter value is not clear in user guide.
Any help would be appreciated.
thanks
sukarna

thanks for the info, i was trying to avoid this but had already reached the same conclusion.
everything else seems to be very time consuming and may not work correctly in the end.
we're on Oracle Applications : 11.5.10.2 which has just been converted to utf-8 and is an Oracle On-Demand installation.
do you know if 5.6.3 of the publisher is supported and any ideas on how difficult it is to get it installed?
cheers
ellen

How to get Grand Total Text in ALV GRID

Hi Folks,
I am able to get the SUBTOTAL TEXT .....But i need...
How to get Grand Total Text in ALV GRID Display...
Can any one give a Solution for this...

Hi Surendar,
Check out this code.. this is showing Total Text in Toal line in the very first column.
REPORT zsales_ord_det_1                        .
TABLES: ztable_10.
TYPE-POOLS: slis.
DATA: BEGIN OF it OCCURS 0,
srno(6) type c,
name LIKE ztable_10-name,
age LIKE ztable_10-age,
END OF it.
DATA : BEGIN OF it_temp OCCURS 0,
name LIKE ztable_10-name,
age LIKE ztable_10-age,
END OF it_temp.
DATA: i_fieldcat TYPE slis_t_fieldcat_alv,
      wa_fieldcat TYPE slis_fieldcat_alv.
DATA: v_repid LIKE sy-repid,
       i_index TYPE STANDARD TABLE OF i WITH HEADER LINE,
       gs_layout TYPE slis_layout_alv,
       gd_layout TYPE slis_layout_alv,
       i_sort TYPE STANDARD TABLE OF slis_sortinfo_alv,
       wa_sort TYPE slis_sortinfo_alv.
START-OF-SELECTION.
v_repid = sy-repid.
SELECT * FROM ztable_10 INTO TABLE it_temp.
LOOP AT it_temp .
    it-srno = 'Total'.
    it-name = it_temp-name.
    it-age = it_temp-age.
    APPEND it.
ENDLOOP.
END-OF-SELECTION.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
   EXPORTING
     i_program_name               = v_repid
     i_internal_tabname           = 'IT'
I_STRUCTURE_NAME             =
I_CLIENT_NEVER_DISPLAY       = 'X'
     i_inclname                   = v_repid
I_BYPASSING_BUFFER           =
I_BUFFER_ACTIVE              =
    CHANGING
      ct_fieldcat                  = i_fieldcat[]
   EXCEPTIONS
     inconsistent_interface       = 1
     program_error                = 2
     OTHERS                       = 3
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
wa_fieldcat-row_pos = 1.
wa_fieldcat-col_pos = 1.
wa_fieldcat-fieldname = 'SRNO'.
wa_fieldcat-tabname = it.
append wa_fieldcat to i_fieldcat.
LOOP AT i_fieldcat INTO wa_fieldcat.
    IF wa_fieldcat-fieldname = 'AGE'.
      wa_fieldcat-do_sum = 'X'.
      MODIFY i_fieldcat FROM wa_fieldcat.
    ENDIF.
   IF wa_fieldcat-fieldname = 'SRNO'.
     Hide this field so that it can display it's content i.e.
        Total text in Subtotal level
    wa_fieldcat-tech = 'X'.
      wa_fieldcat-no_out = 'X'.
      MODIFY i_fieldcat FROM wa_fieldcat TRANSPORTING tech no_out.
   ENDIF.
ENDLOOP.
wa_sort-spos = 1.
wa_sort-fieldname = 'SRNO'.
wa_sort-up = 'X'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO i_sort.
gd_layout-no_totalline = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
   EXPORTING
I_INTERFACE_CHECK                 = ' '
I_BYPASSING_BUFFER                = ' '
I_BUFFER_ACTIVE                       = ' '
     i_callback_program                        = v_repid
I_CALLBACK_PF_STATUS_SET     = ' '
i_callback_user_command                = 'USER_COMMAND'
I_CALLBACK_TOP_OF_PAGE         = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST    = ' '
I_STRUCTURE_NAME                       =
I_BACKGROUND_ID                        = ' '
I_GRID_TITLE                                  =
I_GRID_SETTINGS                          =
     is_layout                                      = gd_layout
     it_fieldcat                                      = i_fieldcat[]
IT_EXCLUDING                      =
IT_SPECIAL_GROUPS                 =
     it_sort                           = i_sort
IT_FILTER                         =
IS_SEL_HIDE                       =
I_DEFAULT                         = 'X'
I_SAVE                            = ' '
IS_VARIANT                        =
IT_EVENTS                         =
IT_EVENT_EXIT                     =
IS_PRINT                          =
IS_REPREP_ID                      =
I_SCREEN_START_COLUMN             = 0
I_SCREEN_START_LINE               = 0
I_SCREEN_END_COLUMN               = 0
I_SCREEN_END_LINE                 = 0
IT_ALV_GRAPHICS                   =
IT_HYPERLINK                      =
IT_ADD_FIELDCAT                   =
IT_EXCEPT_QINFO                   =
I_HTML_HEIGHT_TOP                 =
I_HTML_HEIGHT_END                 =
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
    TABLES
      t_outtab                          = it
   EXCEPTIONS
     program_error                     = 1
     OTHERS                            = 2
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
Regards,
Seema

ALV GRID TEXT in grand Total

Hi friends,
In ALV GRID I need to display text in total like grand Total not in subtotal.
Please let me know the solution .
Thanks in advance
Rajendran

Hi,
R U using FM or Class.
If you are using FM, Grand total cannot be produced. Only using classes we can display Grand Totals.
Its my own experience.
thanks

SALV Class Grand Total With Text

Similar Messages

Maybe you are looking for