Samba 3.0.14 on Solaris 10 issues

Hello All,
I am facing a wierd problem with the Samba 3.0.14a on Solaris 10 and CUPS (1.1.12) printing.
First of all am not sure if this combination works well. If someone could throw some light, it would be of great help.
Samba is setup with security=server, and it is currently a member of the NT4.0 Domain.
When I use the smbstatus command, I get the following error message, even though the clients are connected.
sessionid.tdb not initialised
/var/log/samba/lock/connections.tdb not initialised
This is normal if an SMB client has never connected to your server.
Failed to open byte range locking database
ERROR: Failed to initialise locking database
Can't initialise locking module - exiting
The permissions on the lock directory seems fine.
Looks like something is broken. The files sessionid.tdb and connections.tdb, don't seem to be exisiting on the server at all.
Has anyone come accross this problem. Any help is most appreciated.
Thanks in advance!

Hi Vasanth
Can you share how you resolved the problem.

Similar Messages

Ciscoworks/Sun Solaris issues command

Our Ciscoworks on Solaris always issues commands rusersd to other servers, here is an example to server02, which should not happend. the server itself has nothing to do with ciscoworks.
Can you please tell me why it is issuing this? and how to stop it?
10.Y.Y.101 is the Ciscoworks server,
thanks, Han
Here is one of them: X.X.100.117 Server02
Here are a couple log entries from :
May 6 12:08:29 Server02 portmap[8173]: connect from 10.Y.Y.101 to getport(rusersd): request from unauthorized host
May 6 16:36:20 Server02 portmap[8479]: connect from 10.Y.Y.101 to getport(rusersd): request from unauthorized host

Not sure about solaris. Various strings of netstat on sof appliance (Linux) work for me. Here showing first connections to my remote workstation IP (192.168.150.137) and then identifying the responsible process (CSCO.Apache server) as what is listening on that port:
[SecLab-LMS/root-ade ~]# netstat -anp | grep 150.137tcp 0 0 192.168.100.121:443 192.168.150.137:22015 TIME_WAIT - [SecLab-LMS/root-ade ~]# netstat -lntp | grep CSCO | grep 443tcp 0 0 0.0.0.0:443 0.0.0.0:* LISTEN 1160/CSCO.Apache tcp 0 0 :::44300 :::* LISTEN 30305/CSCO.UPMProcetcp 0 0 :::44301 :::* LISTEN 30305/CSCO.UPMProce[SecLab-LMS/root-ade ~]#

Samba Active Directory, Kerberos on Solaris 10

I have fresh installs of Solaris 10 on Sparc and Intel boxes, with the
Software Companion.
I have downloaded krb5-1.4 from MIT. My LD_LIBRARY_PATH=/opt/sfw/bin:/usr/sfw/bin:/usr/local/ssl/lib
./configure works OK..
Make generates this error:
making all in lib/gssapi/krb5...
+ gawk -f ./../../../util/et/et_c.awk outfile=ettmp27001.c ettmp27001.et
mksh: Fatal error in reader Loop detected when expanding macro value '\#include <stdint.h>
...

Did you finally get it compiled?
I also got compilation error, but a little bit different-- the compilation stopped at making gssapi. It is an Fatal error with Makefile script.

Samba 3.3.3-1 i686 issue

i just upgraded samba on my 2 boxes and ran into this problem when restarting the service
[root@$$$ hasan]# /etc/rc.d/samba start
:: Starting Samba Server [BUSY]
/usr/sbin/smbd: error while loading shared libraries: libavahi-client.so.3: cannot open shared object file: No such file or directory [FAIL]

Hi all, I run into the same problem. I tried to `pacman -S --asdep avahi`, but that listed almost 30MB in dependencies:
dbus-core xcb-proto xproto libxdmcp libxau libxcb kbproto libx11 libice libsm dbus libdaemon glib2
While on my desktop Arch Linux this is ok, on another Arch (mini and GUIless, used with CoLinux) this is a no-no.
Is this dependency really necessary? Or it just "slipped" out of control? I'm curious, since I see many GUI-related libraries among these new unchecked deps, and I've never configured Samba in any other way than `nano /etc/samba/smb.conf`, so I suspect this avahi has to do with some leaked requisites from a Samba GUI config tool?
Last edited by ColdShine (2009-04-14 15:19:13)

Samba 4.x in Solaris 10 1/13 SPARC

Hi,
Can I get samba version 4.x in Solaris 10 1/13 SPARC?
I need to work Windows Server 2012 shares with encryption and SMB version 3
I have smbclient 3.6.20
thanks
fabian

As we don't provide this version, the only ways to obtain it is to compile directly the code source or find a package in Internet that works with Solaris 10.

Samba errors & how to resolve them on Solaris 10?

Hi All,
I found the following errors in a number of /var/samba/logs Samba 3.0.37 on our Solaris servers even though they are working fine:
log.smbd
[2011/03/11 14:25:56, 0] auth/auth_util.c:(844)
create_builtin_administrators: Failed to create Administrators
[2011/03/11 14:28:44, 0] lib/util_sock.c:(1224)
getpeername failed. Error was Transport endpoint is not connected
[2011/03/11 14:28:44, 0] lib/util_sock.c:(261)
Failed to set socket option SO_KEEPALIVE (Error Invalid argument)
[2011/03/11 14:28:44, 0] lib/util_sock.c:(261)
Failed to set socket option TCP_NODELAY (Error Invalid argument)
[2011/03/11 14:28:44, 0] lib/util_sock.c:(1224)
getpeername failed. Error was Transport endpoint is not connected
[2011/03/11 14:28:44, 1] lib/util_sock.c:(1183)
Gethostbyaddr failed for 0.0.0.0
[2011/03/11 14:28:44, 0] lib/util_sock.c:(1224)
log.wb-testSERVER
[2011/05/10 10:31:21, 0] nsswitch/winbindd_passdb.c:(126)
Possible deadlock: Trying to lookup SID S-1-1-0 with passdb backend
log.einbindd-idmap
[2011/05/10 10:03:21, 0] nsswitch/idmap.c:(820)
ERROR: Initialization failed for alloc backend, deferred!
[2011/05/10 10:03:21, 1] nsswitch/idmap_tdb.c:(397)
idmap uid range missing or invalid
idmap will be unable to map foreign SIDs
[2011/05/10 12:07:45, 0] nsswitch/idmap.c:(820)
ERROR: Initialization failed for alloc backend, deferred!
Any ideas on what is causing these and suggestion on resolving them?
Also like to find out where to get the latest version of Samba that is packaged for Solaris 10 environment.
Thanks a million,
Crystal

Hi 799713,
The ideal solution would be to apply patches 119757-19 & 146363-01 to update Samba to 3.5.5 as advised by bobthesungeek76036. Unfortunately, this is not an option for us since one require a software contract with Oracle to get patches these days. As a result, below are some of the steps that I have attempted but still needing further advice to complete:
( i ) Neither do Windows XP / 2008 clients can connect after excluding port 445 with 139. Keeping port 445 would end up with “transport endpoint” errors but I will try to live with it for now.
( ii ) Downloaded Samba 3.4.2 (samba-3.4.2-sol10-sparc-local.gz) from Sunfreeware but having trouble installing it with “pkgadd –d /tmp/samba-3.4.2-sol10-sparc-local with the following output:
# showrev
Hostname: venus
Hostid: 85wt6521
Release: 5.10
Kernel architecture: sun4v
Application architecture: sparc
Hardware provider: Sun_Microsystems
Domain:
Kernel version: SunOS 5.10 Generic_141444-09
# ls -lt samba-3.4.2-sol10-sparc-local
-rwxr-xr-x 1 root bin 269462528 Mar 3 17:09 samba-3.4.2-sol10-sparc-local
# pkgadd -d /tmp/samba-3.4.2-sol10-sparc-local
ld.so.1: pkgadd: fatal: libdlpi.so.1: open failed: No such file or directory
Killed
# /tmp/samba-3.4.2-sol10-sparc-local
/tmp/samba-3.4.2-sol10-sparc-local[2]: SMCsamba: not found
/tmp/samba-3.4.2-sol10-sparc-local[4]: 07070100024738000081a40000000a0000000a000000
014aceecfa000000af000000200000000000000000000000000000001100000000SMCsamba/pkgin
foPKG=SMCsamba: not found
/tmp/samba-3.4.2-sol10-sparc-local[9]: Samba: not found
/tmp/samba-3.4.2-sol10-sparc-local[11]: Christensen: not found
/tmp/samba-3.4.2-sol10-sparc-local[14]: 07070100024737000081a40000000a0000000a00000
0014aceecfa0003a34d000000200000000000000000000000000000001000000000SMCsamba/pkgm
ap:: not found
/tmp/samba-3.4.2-sol10-sparc-local[15]: 1: not found
/tmp/samba-3.4.2-sol10-sparc-local[16]: 1: not found
/tmp/samba-3.4.2-sol10-sparc-local[17]: 1: not found
……..( iii ) Is it still necessary to install all these dependencies as stated on Sunfreeware even though samba-3.4.2-sol10-sparc-local.gz is already 257MB:
popt,
libiconv,
libintl,
readline,
ncurses,
kerberos,
openssl-1.0.0d,
openldap,
sasl2,
zlib,
and either the libgcc-3.4.6 or the gcc-3.4.6 packages.
( iv ) How to turn off existing version 3.0.37 before replacing it with 3.4.2 once it is successfully installed? ? The current version install samba files in /usr/sfw, /etc/sfw and /var/samba. Where will the new installation files go to?
( v ) Couldn’t find anything on samba from Blastwave. Do you have an URL that I could try?
It would be simpler to do a single bundled install as opposed to adding dependency libraries individually where possible.
Many thanks again,
Crystal

Issues with jbdc logging on solaris and windows enviroment

Hi All,
I tried to enable JDBC logging on my app server (tried on Solaris and Windows)and
i am facing issues. It would be great if someone can share their experiences.
SOLARIS ISSUE:
<Mar 12, 2003 8:09:36 PM PST> <Notice> <Management>
<Mar 12, 2003 8:09:52 PM PST> <Notice> <WebLogicServer> <Starting WebLogic Admin
Server "xyz" for domain "abc">
<Mar 12, 2003 8:09:57 PM PST> <Emergency> <Server> <Unable to initialize the server:
'Fatal initialization exception
Throwable: java.lang.NullPointerException
java.lang.NullPointerException
at weblogic.jdbc.common.JDBCService.initLog(JDBCService.java:231)
at weblogic.jdbc.common.JDBCService.initialize(JDBCService.java:57)
at weblogic.t3.srvr.ServerServiceList.initialize(ServerServiceList.java:48)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:492)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:206)
at weblogic.Server.main(Server.java:35)
WINDOWS:
DriverManager.initialize: jdbc.drivers = null
JDBC DriverManager initialized
registerDriver: driver[className=oracle.jdbc.driver.OracleDriver,oracle.jdbc.driver.OracleDriver@1bfaff]
DriverManager.getDriver("jdbc:oracle:thin:@172.16.10.150:1521:vtpsr")
trying driver[className=oracle.jdbc.driver.OracleDriver,oracle.jdbc.driver.OracleDriver@1bfaff]
getDriver returning driver[className=oracle.jdbc.driver.OracleDriver,oracle.jdbc.driver.OracleDriver@1bfaff]
SQLException: SQLState(null) vendor code(17055)
java.sql.SQLException: Invalid character encountered in: failAL32UTF8Conv
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
     at oracle.jdbc.dbaccess.DBError.check_error(DBError.java:1130)
     at oracle.jdbc.dbaccess.DBConversion.failAL32UTF8Conv(DBConversion.java:2762)
     at oracle.jdbc.dbaccess.DBConversion.javaCharsToAL32UTF8Bytes(DBConversion.java:2678)
     at oracle.jdbc.dbaccess.DBConversion.stringToAL32UTF8Bytes(DBConversion.java:2624)
     at oracle.jdbc.dbaccess.DBConversion.stringToAccessCharBytes(DBConversion.java:391)
     at oracle.jdbc.dbaccess.DBConversion.StringToCharBytes(DBConversion.java:456)
     at oracle.jdbc.ttc7.O3log.setSessionFields(O3log.java:796)
Thanks,
Suresh

Infact it is same issue for both environments...
It is
java.sql.SQLException: Invalid character encountered in: failAL32UTF8Conv
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
     at oracle.jdbc.dbaccess.DBError.check_error(DBError.java:1130)
     at oracle.jdbc.dbaccess.DBConversion.failAL32UTF8Conv(DBConversion.java:2762)
     at oracle.jdbc.dbaccess.DBConversion.javaCharsToAL32UTF8Bytes(DBConversion.java:2678)
     at oracle.jdbc.dbaccess.DBConversion.stringToAL32UTF8Bytes(DBConversion.java:2624)
     at oracle.jdbc.dbaccess.DBConversion.stringToAccessCharBytes(DBConversion.java:391)
     at oracle.jdbc.dbaccess.DBConversion.StringToCharBytes(DBConversion.java:456)
     at oracle.jdbc.ttc7.O3log.setSessionFields(O3log.java:796)for both enviroments..
Please let me know if any of u guys came across this before.
Thanks,
Suresh
"suresh maram" <[email protected]> wrote:
>
Hi All,
I tried to enable JDBC logging on my app server (tried on Solaris and
Windows)and
i am facing issues. It would be great if someone can share their experiences.
SOLARIS ISSUE:
<Mar 12, 2003 8:09:36 PM PST> <Notice> <Management>
<Mar 12, 2003 8:09:52 PM PST> <Notice> <WebLogicServer> <Starting WebLogic
Admin
Server "xyz" for domain "abc">
<Mar 12, 2003 8:09:57 PM PST> <Emergency> <Server> <Unable to initialize
the server:
'Fatal initialization exception
Throwable: java.lang.NullPointerException
java.lang.NullPointerException
at weblogic.jdbc.common.JDBCService.initLog(JDBCService.java:231)
at weblogic.jdbc.common.JDBCService.initialize(JDBCService.java:57)
at weblogic.t3.srvr.ServerServiceList.initialize(ServerServiceList.java:48)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:492)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:206)
at weblogic.Server.main(Server.java:35)
WINDOWS:
DriverManager.initialize: jdbc.drivers = null
JDBC DriverManager initialized
registerDriver: driver[className=oracle.jdbc.driver.OracleDriver,oracle.jdbc.driver.OracleDriver@1bfaff]
DriverManager.getDriver("jdbc:oracle:thin:@172.16.10.150:1521:vtpsr")
trying driver[className=oracle.jdbc.driver.OracleDriver,oracle.jdbc.driver.OracleDriver@1bfaff]
getDriver returning driver[className=oracle.jdbc.driver.OracleDriver,oracle.jdbc.driver.OracleDriver@1bfaff]
SQLException: SQLState(null) vendor code(17055)
java.sql.SQLException: Invalid character encountered in: failAL32UTF8Conv
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
     at oracle.jdbc.dbaccess.DBError.check_error(DBError.java:1130)
     at oracle.jdbc.dbaccess.DBConversion.failAL32UTF8Conv(DBConversion.java:2762)
     at oracle.jdbc.dbaccess.DBConversion.javaCharsToAL32UTF8Bytes(DBConversion.java:2678)
     at oracle.jdbc.dbaccess.DBConversion.stringToAL32UTF8Bytes(DBConversion.java:2624)
     at oracle.jdbc.dbaccess.DBConversion.stringToAccessCharBytes(DBConversion.java:391)
     at oracle.jdbc.dbaccess.DBConversion.StringToCharBytes(DBConversion.java:456)
     at oracle.jdbc.ttc7.O3log.setSessionFields(O3log.java:796)
Thanks,
Suresh

Samba timeout when trying to connect to a computer in a workgroup

Hello, seems like the best section to post this in...
Right after I installed my Archlinux setup, I spent a bunch of time trying to get samba running perfectly, mainly, it was just so that other (window$) computers could access mine. Upon getting it working perfectly, both ways, I didn't use it for a while (which is typically the case).
So today, I need to transfer lots and lots of data, but via Dolphin, browsing the workgroup (which I clicked), lists all the computers that are there, including my own (this).
That's good so far, but after I browse to one of those computers (even my own!!), shortly thereafter, I receive a timeout error.
I have tried restarting the samba daemon, netfs, I also tried stopping network manager, and starting the network daemon myself, hoping it was network manager's brokenness that was the problem. Nope.
Still left in this situation...and nothing that I can remember, has changed since the last time, I didn't screw with config files or anything. Although, I do think I changed routers between this time, I also remember seeing some updates for samba-related packages.
All out of ideas, I posted here.
I can post my smb.conf file..or anything else for that matter, if you want. I just want this problem to be solved, and currently am forced to boot into window$ to transfer lots of data. Naturally, I can't do anything during this time, when not in linux....and it kills me a little bit more each time I have to see it
EDIT: Also note that, I tried using the default config, but I still get timeouts(and restarting samba daemon of course). With 'smbtree', it lists all of the shares available on the workgroup also. I also use the gamin program, as opposed to FAM. Originally, I followed the wiki, and that was how I get it working in the first place, but no longer does it work correctly. The logs in /var/log/samba/ do not show anything interesting, and in fact, only show about 1-2 lines, just saying that it started..
I also had it say about a firewall possibly being in use, but on a reload/retry, it returns to a timeout error. I do not have any firewalls that I am aware of, on.
Update: Well I figured out if I run the following command: smbclient '\\NAS\Data' that I will then be taken to a prompt where I can do ls, cd, etc, and browse that share perfectly. What's going on here? Dolphin still times out on it and I would prefer to use a GUI for this..
Last edited by sreich (2009-06-26 17:00:14)

Well I decided to try to use 'smb4k', which I just recently found, it also sees all of the computers on my network, but it also sees their shares after I browse into it. Unfortunately, it fails to mount any of them...
"mount error: could not resolve address for NAS: Name or service not known
No ip address specified and hostname not found"
That is the message I receive after clicking (mounting) on one of the shares of the 'NAS' computer, the one on my network.
Perhaps this error will make things a bit more clear?
I've been even looking at the docs at samba.org, trying to debug this issue...
UPDATE: Seem to have limited the problem down, at least now I can mount a share on a computer but *only* if I specify the IP address manually.
So it appears that it cannot resolve the name of said computer/share, to an IP... what could be causing this, and how can I fix it?
Last edited by sreich (2009-06-26 19:17:12)

Samba configuration on solarisintel 8

hai i heve downloaded and installed samba server on my intel solaris 8 .. can any one help me to configure the server so that i can login from a widows desktop.
help.. appriciated.
konkani

Modify the configuration file that resided in /usr/local/samba/lib/smb.conf
For example:
[global]
     workgroup =WORKGROUP
     netbios name = yourhostname
     default = global
     security = share
     encrypt passwords = yes
     server string = Samba V2.2.2
[Shared_Folder]
     read list = guest,@guest
     writable = yes
     valid users = root,@root
     hide dot files = no
     path = /usr/local/src
     public = yes
Of course, if you are want to join in Windows Domain, addional configure is necessary.

Using Solaris 10 on VMWARE WORKSTATION 5.5BETA

HI .
Can anyone help me?
I have got the Solaris CD's and need to install all of them in VMWARE but after the booting of Solaris 10(Experimental) it give s an error of the CD ROM.
I wanna install Solaris on my laptop SONY VGN-A195HP with WINDOWS XP PRO.
Best Regards.

Sounds more like a VMWare than a Solaris issue, I suggest contacting VMWare support. At best you could try using the ISO images directly.

Solaris 11 responds to IPSEC VPN traffic ONLY one direction

I have established a IPSEC VPN tunnel between my remote solaris 11 and office Sonicwall router using Site to Site. Everything works fine if the traffic initiates from the Solaris side. However when I try to ping or any network services like nfs,ssh, samb, etc. on the remote solaris box from our office. The server does NOT respond to the incoming packets but packets are going through the tunnel and appears on the remote end when I do snoop –d tun0 and snoop –I vnic0. What I do notice is that snoop –d vnic0 shows no packets and it doesn’t seem to get any traffic at all (see netstat –rn). Could it be my routing table? Ip zones? Any ideas? I followed the Oracle Documents very carefully and with extra help from other extern Solaris 11 admin sites. I know people would suggest using OpenSwan or OpenVPN but this setup should work.
Here is the network info on my IPSEC VPN setup. Tunnel is configured in Transport Mode and IPSEC/IKE is working fine.
Solaris 11 vnic0/10.4.0.1/24, external Internet Nic is nge0/209.xxx.xxx.194/25
# dladm show-link
LINK CLASS MTU STATE OVER
nge0 phys 1500 up --
tun0 iptun 1402 up --
vnic0 vnic 1500 up nge0
# dladm show-iptun
LINK TYPE FLAGS LOCAL REMOTE
tun0 ipv4 s- 209.xxx.xxx.194 64.xxx.xxx.34
# ipadm show-if
IFNAME CLASS STATE ACTIVE OVER
lo0 loopback ok yes --
nge0 ip ok yes --
vnic0 ip ok yes --
tun0 ip ok yes --
# ipadm show-addr
ADDROBJ TYPE STATE ADDR
lo0/v4 static ok 127.0.0.1/8
nge0/v4 static ok 209.xxx.xxx.194/25
vnic0/inside static ok 10.4.0.1/24
tun0/v4 static ok 10.4.0.1->172.20.0.1
lo0/v6 static ok ::1/128
# netstat -rn
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
default 209.xxx.xxx.129 UG 6 16874898 nge0
10.4.0.0 10.4.0.1 U 2 0 vnic0
10.181.0.0 172.20.0.1 UGS 3 16862235 tun0
127.0.0.1 127.0.0.1 UH 2 1786 lo0
172.20.0.1 10.4.0.1 UH 3 16862235 tun0
Routing Table: IPv6
Destination/Mask Gateway Flags Ref Use If
::1 ::1 UH 2 42 lo0
# routeadm
Configuration Current Current
Option Configuration System State
IPv4 routing disabled disabled
IPv6 routing disabled disabled
IPv4 forwarding disabled disabled
IPv6 forwarding disabled disabled
Routing services "route:default ripng:default"
Routing daemons:
STATE FMRI
disabled svc:/network/routing/ripng:default
disabled svc:/network/routing/rdisc:default
disabled svc:/network/routing/route:default
disabled svc:/network/routing/legacy-routing:ipv4
disabled svc:/network/routing/legacy-routing:ipv6
online svc:/network/routing/ndp:default
Solaris># ping 10.181.1.218
10.181.1.218 is alive
C:\>ping 10.4.0.1
Pinging 10.4.0.1 with 32 bytes of data:
Request timed out.
Request timed out.
# snoop -d tun0 10.181.1.218
Using device tun0 (promiscuous mode)
10.181.1.218-> 10.4.0.1 ICMP Echo request (ID: 1 Sequence number: 33) (1 encap)
10.181.1.218-> 10.4.0.1 ICMP Echo request (ID: 1 Sequence number: 34) (1 encap)
# snoop -I vnic0 10.181.1.218
Using device ipnet/vnic0 (promiscuous mode)
10.181.1.218-> 10.4.0.1 ICMP Echo request (ID: 1 Sequence number: 36)
10.181.1.218-> 10.4.0.1 -i ICMP Echo request (ID: 1 Sequence number: 37)
# ipadm show-prop
PROTO PROPERTY PERM CURRENT PERSISTENT DEFAULT POSSIBLE
ipv4 forwarding rw off off off on,off
ipv4 ttl rw 255 -- 255 1-255
ipv6 forwarding rw off -- off on,off
ipv6 hoplimit rw 255 -- 255 1-255
ipv6 hostmodel rw weak -- weak strong,
src-priority,
weak
ipv4 hostmodel rw strong strong weak strong,
src-priority,
weak
icmp max_buf rw 262144 -- 262144 65536-1073741824
icmp recv_buf rw 8192 -- 8192 4096-262144
icmp send_buf rw 8192 -- 8192 4096-262144
tcp cong_default rw newreno -- newreno newreno,cubic,
highspeed,vegas
tcp cong_enabled rw newreno,cubic, newreno,cubic, newreno newreno,cubic,
highspeed, highspeed, highspeed,vegas
vegas vegas
tcp ecn rw passive -- passive never,passive,
active
tcp extra_priv_ports rw 2049,4045 -- 2049,4045 1-65535
tcp largest_anon_port rw 65535 -- 65535 32768-65535
tcp max_buf rw 1048576 -- 1048576 128000-1073741824
tcp recv_buf rw 128000 -- 128000 2048-1048576
tcp sack rw active -- active never,passive,
active
tcp send_buf rw 49152 -- 49152 4096-1048576
tcp smallest_anon_port rw 32768 -- 32768 1024-65535
tcp smallest_nonpriv_port rw 1024 -- 1024 1024-32768
udp extra_priv_ports rw 2049,4045 -- 2049,4045 1-65535
udp largest_anon_port rw 65535 -- 65535 32768-65535
udp max_buf rw 2097152 -- 2097152 65536-1073741824
udp recv_buf rw 57344 -- 57344 128-2097152
udp send_buf rw 57344 -- 57344 1024-2097152
udp smallest_anon_port rw 32768 -- 32768 1024-65535
udp smallest_nonpriv_port rw 1024 -- 1024 1024-32768
sctp cong_default rw newreno -- newreno newreno,cubic,
highspeed,vegas
sctp cong_enabled rw newreno,cubic, newreno,cubic, newreno newreno,cubic,
highspeed, highspeed, highspeed,vegas
vegas vegas
sctp extra_priv_ports rw 2049,4045 -- 2049,4045 1-65535
sctp largest_anon_port rw 65535 -- 65535 32768-65535
sctp max_buf rw 1048576 -- 1048576 102400-1073741824
sctp recv_buf rw 102400 -- 102400 8192-1048576
sctp send_buf rw 102400 -- 102400 8192-1048576
sctp smallest_anon_port rw 32768 -- 32768 1024-65535
sctp smallest_nonpriv_port rw 1024 -- 1024 1024-32768
# ipadm show-addrprop
ADDROBJ PROPERTY PERM CURRENT PERSISTENT DEFAULT POSSIBLE
lo0/v4 broadcast r- -- -- -- --
lo0/v4 deprecated rw off -- off on,off
lo0/v4 prefixlen rw 8 8 8 1-30,32
lo0/v4 private rw off -- off on,off
lo0/v4 reqhost r- -- -- -- --
lo0/v4 transmit rw on -- on on,off
lo0/v4 zone rw global -- global --
nge0/v4 broadcast r- 209.xxx.xxx.255 -- 209.xxx.xxx.255 --
nge0/v4 deprecated rw off -- off on,off
nge0/v4 prefixlen rw 25 25 24 1-30,32
nge0/v4 private rw on on off on,off
nge0/v4 reqhost r- -- -- -- --
nge0/v4 transmit rw on -- on on,off
nge0/v4 zone rw global -- global --
vnic0/inside broadcast r- 10.4.0.255 -- 10.255.255.255 --
vnic0/inside deprecated rw off -- off on,off
vnic0/inside prefixlen rw 24 24 8 1-30,32
vnic0/inside private rw off -- off on,off
vnic0/inside reqhost r- -- -- -- --
vnic0/inside transmit rw on -- on on,off
vnic0/inside zone rw global -- global --
tun0/v4 broadcast r- -- -- -- --
tun0/v4 deprecated rw off -- off on,off
tun0/v4 prefixlen rw -- -- -- --
tun0/v4 private rw off -- off on,off
tun0/v4 reqhost r- -- -- -- --
tun0/v4 transmit rw on -- on on,off
tun0/v4 zone rw global -- global --
ipadm show-ifprop
IFNAME PROPERTY PROTO PERM CURRENT PERSISTENT DEFAULT POSSIBLE
nge0 arp ipv4 rw on -- on on,off
nge0 forwarding ipv4 rw off off off on,off
nge0 metric ipv4 rw 0 -- 0 --
nge0 mtu ipv4 rw 1500 -- 1500 68-1500
nge0 exchange_routes ipv4 rw on -- on on,off
nge0 usesrc ipv4 rw none -- none --
nge0 forwarding ipv6 rw off -- off on,off
nge0 metric ipv6 rw 0 -- 0 --
nge0 mtu ipv6 rw 1500 -- 1500 1280-1500
nge0 nud ipv6 rw on -- on on,off
nge0 exchange_routes ipv6 rw on -- on on,off
nge0 usesrc ipv6 rw none -- none --
nge0 group ip rw -- -- -- --
nge0 standby ip rw off -- off on,off
vnic0 arp ipv4 rw on -- on on,off
vnic0 forwarding ipv4 rw on on off on,off
vnic0 metric ipv4 rw 0 -- 0 --
vnic0 mtu ipv4 rw 1500 -- 1500 68-1500
vnic0 exchange_routes ipv4 rw on -- on on,off
vnic0 usesrc ipv4 rw none -- none --
vnic0 group ip rw -- -- -- --
vnic0 standby ip rw off -- off on,off
tun0 arp ipv4 rw off -- on on,off
tun0 forwarding ipv4 rw on on off on,off
tun0 metric ipv4 rw 0 -- 0 --
tun0 mtu ipv4 rw 1402 -- 1402 68-65515
tun0 exchange_routes ipv4 rw on -- on on,off
tun0 usesrc ipv4 rw none -- none --
tun0 group ip rw -- -- -- --
tun0 standby ip rw off -- off on,off
Edited by: user1233039 on Jun 20, 2012 9:18 AM

I have established a IPSEC VPN tunnel between my remote solaris 11 and office Sonicwall router using Site to Site. Everything works fine if the traffic initiates from the Solaris side. However when I try to ping or any network services like nfs,ssh, samb, etc. on the remote solaris box from our office. The server does NOT respond to the incoming packets but packets are going through the tunnel and appears on the remote end when I do snoop –d tun0 and snoop –I vnic0. What I do notice is that snoop –d vnic0 shows no packets and it doesn’t seem to get any traffic at all (see netstat –rn). Could it be my routing table? Ip zones? Any ideas? I followed the Oracle Documents very carefully and with extra help from other extern Solaris 11 admin sites. I know people would suggest using OpenSwan or OpenVPN but this setup should work.
Here is the network info on my IPSEC VPN setup. Tunnel is configured in Transport Mode and IPSEC/IKE is working fine.
Solaris 11 vnic0/10.4.0.1/24, external Internet Nic is nge0/209.xxx.xxx.194/25
# dladm show-link
LINK CLASS MTU STATE OVER
nge0 phys 1500 up --
tun0 iptun 1402 up --
vnic0 vnic 1500 up nge0
# dladm show-iptun
LINK TYPE FLAGS LOCAL REMOTE
tun0 ipv4 s- 209.xxx.xxx.194 64.xxx.xxx.34
# ipadm show-if
IFNAME CLASS STATE ACTIVE OVER
lo0 loopback ok yes --
nge0 ip ok yes --
vnic0 ip ok yes --
tun0 ip ok yes --
# ipadm show-addr
ADDROBJ TYPE STATE ADDR
lo0/v4 static ok 127.0.0.1/8
nge0/v4 static ok 209.xxx.xxx.194/25
vnic0/inside static ok 10.4.0.1/24
tun0/v4 static ok 10.4.0.1->172.20.0.1
lo0/v6 static ok ::1/128
# netstat -rn
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
default 209.xxx.xxx.129 UG 6 16874898 nge0
10.4.0.0 10.4.0.1 U 2 0 vnic0
10.181.0.0 172.20.0.1 UGS 3 16862235 tun0
127.0.0.1 127.0.0.1 UH 2 1786 lo0
172.20.0.1 10.4.0.1 UH 3 16862235 tun0
Routing Table: IPv6
Destination/Mask Gateway Flags Ref Use If
::1 ::1 UH 2 42 lo0
# routeadm
Configuration Current Current
Option Configuration System State
IPv4 routing disabled disabled
IPv6 routing disabled disabled
IPv4 forwarding disabled disabled
IPv6 forwarding disabled disabled
Routing services "route:default ripng:default"
Routing daemons:
STATE FMRI
disabled svc:/network/routing/ripng:default
disabled svc:/network/routing/rdisc:default
disabled svc:/network/routing/route:default
disabled svc:/network/routing/legacy-routing:ipv4
disabled svc:/network/routing/legacy-routing:ipv6
online svc:/network/routing/ndp:default
Solaris># ping 10.181.1.218
10.181.1.218 is alive
C:\>ping 10.4.0.1
Pinging 10.4.0.1 with 32 bytes of data:
Request timed out.
Request timed out.
# snoop -d tun0 10.181.1.218
Using device tun0 (promiscuous mode)
10.181.1.218-> 10.4.0.1 ICMP Echo request (ID: 1 Sequence number: 33) (1 encap)
10.181.1.218-> 10.4.0.1 ICMP Echo request (ID: 1 Sequence number: 34) (1 encap)
# snoop -I vnic0 10.181.1.218
Using device ipnet/vnic0 (promiscuous mode)
10.181.1.218-> 10.4.0.1 ICMP Echo request (ID: 1 Sequence number: 36)
10.181.1.218-> 10.4.0.1 -i ICMP Echo request (ID: 1 Sequence number: 37)
# ipadm show-prop
PROTO PROPERTY PERM CURRENT PERSISTENT DEFAULT POSSIBLE
ipv4 forwarding rw off off off on,off
ipv4 ttl rw 255 -- 255 1-255
ipv6 forwarding rw off -- off on,off
ipv6 hoplimit rw 255 -- 255 1-255
ipv6 hostmodel rw weak -- weak strong,
src-priority,
weak
ipv4 hostmodel rw strong strong weak strong,
src-priority,
weak
icmp max_buf rw 262144 -- 262144 65536-1073741824
icmp recv_buf rw 8192 -- 8192 4096-262144
icmp send_buf rw 8192 -- 8192 4096-262144
tcp cong_default rw newreno -- newreno newreno,cubic,
highspeed,vegas
tcp cong_enabled rw newreno,cubic, newreno,cubic, newreno newreno,cubic,
highspeed, highspeed, highspeed,vegas
vegas vegas
tcp ecn rw passive -- passive never,passive,
active
tcp extra_priv_ports rw 2049,4045 -- 2049,4045 1-65535
tcp largest_anon_port rw 65535 -- 65535 32768-65535
tcp max_buf rw 1048576 -- 1048576 128000-1073741824
tcp recv_buf rw 128000 -- 128000 2048-1048576
tcp sack rw active -- active never,passive,
active
tcp send_buf rw 49152 -- 49152 4096-1048576
tcp smallest_anon_port rw 32768 -- 32768 1024-65535
tcp smallest_nonpriv_port rw 1024 -- 1024 1024-32768
udp extra_priv_ports rw 2049,4045 -- 2049,4045 1-65535
udp largest_anon_port rw 65535 -- 65535 32768-65535
udp max_buf rw 2097152 -- 2097152 65536-1073741824
udp recv_buf rw 57344 -- 57344 128-2097152
udp send_buf rw 57344 -- 57344 1024-2097152
udp smallest_anon_port rw 32768 -- 32768 1024-65535
udp smallest_nonpriv_port rw 1024 -- 1024 1024-32768
sctp cong_default rw newreno -- newreno newreno,cubic,
highspeed,vegas
sctp cong_enabled rw newreno,cubic, newreno,cubic, newreno newreno,cubic,
highspeed, highspeed, highspeed,vegas
vegas vegas
sctp extra_priv_ports rw 2049,4045 -- 2049,4045 1-65535
sctp largest_anon_port rw 65535 -- 65535 32768-65535
sctp max_buf rw 1048576 -- 1048576 102400-1073741824
sctp recv_buf rw 102400 -- 102400 8192-1048576
sctp send_buf rw 102400 -- 102400 8192-1048576
sctp smallest_anon_port rw 32768 -- 32768 1024-65535
sctp smallest_nonpriv_port rw 1024 -- 1024 1024-32768
# ipadm show-addrprop
ADDROBJ PROPERTY PERM CURRENT PERSISTENT DEFAULT POSSIBLE
lo0/v4 broadcast r- -- -- -- --
lo0/v4 deprecated rw off -- off on,off
lo0/v4 prefixlen rw 8 8 8 1-30,32
lo0/v4 private rw off -- off on,off
lo0/v4 reqhost r- -- -- -- --
lo0/v4 transmit rw on -- on on,off
lo0/v4 zone rw global -- global --
nge0/v4 broadcast r- 209.xxx.xxx.255 -- 209.xxx.xxx.255 --
nge0/v4 deprecated rw off -- off on,off
nge0/v4 prefixlen rw 25 25 24 1-30,32
nge0/v4 private rw on on off on,off
nge0/v4 reqhost r- -- -- -- --
nge0/v4 transmit rw on -- on on,off
nge0/v4 zone rw global -- global --
vnic0/inside broadcast r- 10.4.0.255 -- 10.255.255.255 --
vnic0/inside deprecated rw off -- off on,off
vnic0/inside prefixlen rw 24 24 8 1-30,32
vnic0/inside private rw off -- off on,off
vnic0/inside reqhost r- -- -- -- --
vnic0/inside transmit rw on -- on on,off
vnic0/inside zone rw global -- global --
tun0/v4 broadcast r- -- -- -- --
tun0/v4 deprecated rw off -- off on,off
tun0/v4 prefixlen rw -- -- -- --
tun0/v4 private rw off -- off on,off
tun0/v4 reqhost r- -- -- -- --
tun0/v4 transmit rw on -- on on,off
tun0/v4 zone rw global -- global --
ipadm show-ifprop
IFNAME PROPERTY PROTO PERM CURRENT PERSISTENT DEFAULT POSSIBLE
nge0 arp ipv4 rw on -- on on,off
nge0 forwarding ipv4 rw off off off on,off
nge0 metric ipv4 rw 0 -- 0 --
nge0 mtu ipv4 rw 1500 -- 1500 68-1500
nge0 exchange_routes ipv4 rw on -- on on,off
nge0 usesrc ipv4 rw none -- none --
nge0 forwarding ipv6 rw off -- off on,off
nge0 metric ipv6 rw 0 -- 0 --
nge0 mtu ipv6 rw 1500 -- 1500 1280-1500
nge0 nud ipv6 rw on -- on on,off
nge0 exchange_routes ipv6 rw on -- on on,off
nge0 usesrc ipv6 rw none -- none --
nge0 group ip rw -- -- -- --
nge0 standby ip rw off -- off on,off
vnic0 arp ipv4 rw on -- on on,off
vnic0 forwarding ipv4 rw on on off on,off
vnic0 metric ipv4 rw 0 -- 0 --
vnic0 mtu ipv4 rw 1500 -- 1500 68-1500
vnic0 exchange_routes ipv4 rw on -- on on,off
vnic0 usesrc ipv4 rw none -- none --
vnic0 group ip rw -- -- -- --
vnic0 standby ip rw off -- off on,off
tun0 arp ipv4 rw off -- on on,off
tun0 forwarding ipv4 rw on on off on,off
tun0 metric ipv4 rw 0 -- 0 --
tun0 mtu ipv4 rw 1402 -- 1402 68-65515
tun0 exchange_routes ipv4 rw on -- on on,off
tun0 usesrc ipv4 rw none -- none --
tun0 group ip rw -- -- -- --
tun0 standby ip rw off -- off on,off
Edited by: user1233039 on Jun 20, 2012 9:18 AM

Solaris 10 NFS client with FreeBSD server

Hello,
I have an issue about Solaris 10 and a FreeBSD server (currently running 5.4-STABLE). This server exports several NFS shares (3TB each) to various machines including Linux (which works fine) and Solaris (which worked fine on 9 but not 10).
The last progress was that if you link .sunw in the /home/$USER
directory to /tmp on Solaris 10, you can then use applications and ssh out from the server. It looks to me like a pure Solaris issue but i still have failed to find a way to fix it.
The mount options i currently have on solaris are :
rw,bg,nosuid,nfsver=3,tcp,intr,-w=32768,-r=32768
Also modified /etc/default/nfs to force NFS3 thinking it might have been the issue : NFS_CLIENT_VERSMAX=3
I have searched forums and search engines hoping to find an answer but have failed to see anything yet. As far as i can tell, it is a Solaris 10 issue but have no idea how to fix it.
Thanks for any help,
Steph

I also have this problem with FreeBSD 6.2 and Solaris 10 (was OK with Solaris 7 and 9).
The file system shared is about 30GB, and is FreeBSD on Sparc64.

Application Migration from HP-UNIX to SUN Solaris

Hi Gurus,
Need help on the application migration from HP-UNIX to Sun Solaris . Copied the filesystems APPL_TOP, OA_HTML, OA_JAVA, COMMON_TOP/util and COMMON_TOP/_pages from SOURCE( HP) to TARGET SUN-solaris as per 238276.1
Now trying to clone Autoconfig XML context file on the TARGET System
perl adclonectx.pl migrate java=\opt\java1.4 \
contextfile=\ul01\app\applmgr\lasrx\admin\LASRX_fiapd4.xml
Error: source context file ul01appapplmgrlasrxadminLASRX_fiapd4.xml does not exist.
Questions:
======
1. we still need to install jdk in the TARGET or copy the file system from source(HP) to target( Solaris) bring the JDK and how to check jdk on Solaris?
2. In clone autoconfig XML, contextfile=? Is the location of SOURCE or TARGER?
3. I think running above with root permission.
Please help somebody on this issue.
Thank You.

Hi Hussein,
I need your help on the Application migration from HP-UNIX to SUN Solaris. As per the note 238276.1 we dont copy $806_ORACLE_HOME for cross platform migration, Copied all the filesystem from SOURCE to TARGET but rename it because it suppose to create while installing Middle tier.
Issue:1
=====
When i start to set environment like below, i get the error and
. /ul01/app/applmgr/lasrx/APPSORA.env
ksh: /ul02/app/oracle/lasrx/8.0.6_new/LASRX_fiapd4.env: not found
I am trying to install Middle Tier Technology Stack on SUN server ( Migrating from HP-UNIX to SUN solaris)
Issue 2: ( Display error) while install Tech Stack
=====
./rapidwiz -techstack
Rapid Install Wizard is validating your file system......
>> Wizard requires the DISPLAY variable to be set.
>> Please set your DISPLAY variable and restart Rapid Install Wizard.
even i can not see
echo $DISPLAY because not set the environment.
Need your help and suggetions on this.
Thank You.

SolMan 4.0 Solaris / Oracle install: Unable to create account user

Hi!
Am I getting this error during step 2 (Create users for SAP System) of the Solution Manager 4.0 installation. This error occurs when SAPinst is trying to create account "orasol" for system "SOL".
INFO[E] 2007-02-14 13:12:51
FSH-00006 Return value of function getpwnam(orasol) is NULL
ERROR 2007-02-14 13:12:51
FSL-01002 Unable to create account user="soladm". UX: /usr/sbin/useradd: ERROR: Unable to create the home directory: No such file or directory. (return code 12)
ERROR 2007-02-14 13:12:51
MUT-03025 Caught ESyException in Modulecall: ESAPinstException: error text undefined.
Please let me know how I can fix this error!
Regards,
Thomas

Hello Thomas,
It looks like a Solaris issue. Check if the home directory
/home is reserved in the Solaris configuration.
Check if this fix the problem please perform the following steps:
1. modify /etc/auto_master file to change the entry for '/home' to say
'/autohome' instead
2. reboot
3. rmdir /home
4. ln -s /export/home /home (make sure /export/home exists)
Also you could create soladm manually in advance.
Hope this helps,
Dolores

Don't know if Solaris is installed

Hello,
I am total new comer to Solaris so please bare with me. I know that the Sunfire V100 comes with Soalris 8 pre-installed. However I want to be 100% sure.
How can I tell if Solaris installed?. I can do basic commands on it like cd and ls.
Ok I know this going to sound fancy however where do I get Samba to install onto the Solaris please?.

If you can boot the thing and are able to do basic commands, you obviously have some flavor of Unix.
Try the uname command and it will tell you what version you are running. Do a man uname to see what the switch setting will show you.
For Samba try:
www.sunfreeware.com
or
www.samba.org

Samba 3.0.14 on Solaris 10 issues

Similar Messages

Maybe you are looking for