Same node names for 2 nodes

Assuming the two nodes have different parent nodes, can they have the same node name?

No no, I want the technical name to be identical. My question is, is it possible to have the same node under 2 different parent nodes?
For example:
East1 -
             NY
             ATL
             MIA
East2 -
            ORL
            PHI
            MIA
Miami is both in East1 and East2. Is this possbile technically?

Similar Messages

  • Import tables using same file name for all tables

    hi,
    We are using oracle 11.2.0.3.0, we have taken export of multiple tables in schema, unfortunately in exp command we have mention same file name for all the tables, now it has created one file for all export but the size of that file shows that all the tables included in it , when we try to import the tables only last table mention in export command is imported for other tables it hangs, example of code show below.
    Is there any way to import the remaining tables.
    exp system file =exp05042013.dmp tables=gr.table1
    exp system file =exp05042013.dmp tables=gr.table2
    exp system file =exp05042013.dmp tables=gr.table3

    Hi,
    You can use as :
    exp username@database tables=table1,table2 file=tabledata.dmpDid you have any RMAN full backup?
    Why you are not recover crash database?
    Mahir

  • Could take the same JNDI-names for both tags: jndi-name and local-jndi-name

    Hello!
    I try to design the weblogic-ejb-jar.xml descriptor and I ask myself, if I could
    take the same JNDI-names for both tags:
    <jndi-name> and <local-jndi-name> ?
    Could you give me and advice if this is ok?
    Thanks

    if you have two separate interfaces, you cant bind them to the same jndi
    name. you will have a local home that extends EJBLocalHome and a remote
    home called EJBHome. also you need to know which one you are looking up
    so you can cast it properly, and use it property (remote interfaces need
    PortableRemoteObject, remote parameters are passed by value, ...)
    joern kirch wrote:
    Hello!
    I try to design the weblogic-ejb-jar.xml descriptor and I ask myself, if I could
    take the same JNDI-names for both tags:
    <jndi-name> and <local-jndi-name> ?
    Could you give me and advice if this is ok?
    Thanks

  • GET XML NODE NAME FOR LOOPING

    Hi,
    i hv a procedure to get the xml data's(values of the xml) from a clob. in a table.it works fine the parent tags but if the same tag is there for two times then i am not able to loop it because i dont know the tag name for which the loop should be run.
    to be clear.
    <root>
    <tag1>value1
    </tag1>
    <tag1>value2
    </tag1>
    </root>
    i need to run some fns for each node value so i need to loop for each node having same value pls help me to get the node name.

    You can simply alter get xml node name in loop to return a count on just the node you are looking for. Not sure why you need to know the count when you can have the logic iterate through the nodes for you, either as an XMLType or a DOMDocument (see nodelist).

  • How to create Same file names for source and target.

    hi
    Can any body send Procedure for below requirement.
    how to create the dynamic file names for a source and save the file with same name in the Target, because it has to identify that which sender had sent the file and the target file should be again sent back to the customer as a link.
    Please help me.
    Thanks

    Hi,
    See the below link
    /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - sender file name as receiver file name
    Regards
    Chilla

  • How to set same domain name for Azure Storage and Hosted Service

    I have a web application running on azure and using azure storage with blob. My application allows to edit html files that are in the azure storage to save with another name and publish them later. I am using javascript to edit the html content that
    I display in an Iframe but as the domain of my web application and the html that I try to edit are not the same, I got and this error "Unsafe JavaScript
    attempt to access frame with URL "URL1" from frame with URL "URL2". Domains, protocols and ports must match".
    I have been doing some research about it and the only way to make it work is to have the web application and the html that I want to access using javascript under the same domain. 
    So my question is: is it possible to have the same domain name in azure for the hosted service and the storage.
    Like this:
    hosted service: example.com
    storage: example.com
    By the way I already customize the domain names so they looks like this:
    hosted service <mydomainname>.com
    storage <blob.mydomainname>.com
    Actually I have my application running in another hosting and I have no problem there since I have a folder where I am storing the files that I am editing so they are in the same domain as the application. I have been thinking in to do the same with Azure,
    at least to have a folder where I can store the html file meanwhile I am editing it but I am not sure how much space I have in the hosted service to store temporary files.
    let me know if you have a good tip or idea about how to solve this issue.

    Hi Rodrigo,
    Though both Azure Blob and Azure applications support custom domain, one domain could have only one DNS record (in this case is CNAME record) at one time. For Steve's case, he has 3 domains, blog.smarx.com, files.blog.smarx.com and cdn.blog.smarx.com.
    > I would like to find a way to storage my html page that I need to edit under the same domain.
    For this case, a workaround will be adding a http handler in your Azure application to serve file requests. That means we do not use the actual blob url to access blob content but send the request to a http handler then the http handler gets the content
    from blob storage and returns it.
    Please check
    Accessing blobs in private container without Shared Access Secret key for a code sample.
    Thanks.
    Wengchao Zeng
    Please mark the replies as answers if they help or unmark if not.
    If you have any feedback about my replies, please contact
    [email protected]
    Microsoft One Code Framework

  • Same index name for different tables in different schema

    Just a quick query
    Can two tables present in different schema of same database has same index name ?
    Will there be any problem?
    Thanks

    And just a quick answer:
    859486 wrote:
    Just a quick query
    Can two tables present in different schema of same database has same index name ?Yes.
    >
    Will there be any problem?No.
    >
    Thanks

  • Disable Case Sensitivity for Node Names

    Hello everyone,
    is it possible to dissable the case sensitivity for node names?
    I have an import of ca. 40k records. The source system differs between small and capital letters.
    DRM seems to not differ between small and capital letters.
    Is there a workaround without usind different technical names for nodes.
    Kind regards,
    Pascal

    There is nothing to do with in DRM, can you check with your DBA on what's the NLS_SORT and NLS_COMP settings are,ask them to check the below values.
    NLS_COMP=LINGUISTIC and NLS_SORT=BINARY_CI
    If nothing works out submit an SR:-)

  • Modifying Hierarchy Node name in Query or during download from ECC

    We have some hierarchies that we download from ECC into BI and use them in query to display as report for Income statement or Balance Sheet statements. The issue we want to resolve is when we download the hierarchy from ECC into the intermediate download process tags hierarchy name as prefix for the node name. So for example if the hierarchy in ECC is as below
    ABC (name)
      1000 (node name)
      2000 (node name)
    When its downloaded in BW it looks as below
    ABC
      ABC1000
      ABC2000
    We want to see hierarchy in BW same as ECC. I tried removing the prefix in the query with no success.
    Since the table RSTHIERNODE has the prefixed also as node name so that's how it will be displayed.
    I thought I will modify the download process (datasource) to remove the prefix but the delivered user exit EXIT_SAPLRSAP_004 get executed prior to select of the data.
    Has anyone got any other suggestions?
    Thanks for your time.
    Edited by: SK on Oct 28, 2008 2:19 PM

    Ravi,
    Just checking. Did you create a authorization variable and added it in the query for that characteristic?
    Gova

  • Wrong node name passing to HPM via SCOM to HPOM SCinterop connector

    Hello,
    We are experience an intermittant issue with our SCOM to HPOM SCInterOP connector. We are having an issue where the SCOM RMS server  name  is being passed to HPOM as the node name for alerts when in SCOM the node name is a completely diferent
    server.
    An example would be an IIS appplication pool error that is generated. The path for the alert will specificy a SCOM Agent node, such as "server1.acme.com", however when the event is generated in HPOM the node name will come up with our SCOM RMS server
    name eg: "scomsrv1.acme.com".
    We have an automated ticketing system which then generates a ticket in our service desk application however when this situation occurs it is very difficult for a non SCOM people to acurately determine what server is actually generating the error.
    We are are running SCOM 2007 R2 CU6 and our HP OM server is 8.10 with the latest patches applied.
    Any asistance would be much appreciated.
    Regards
    Tony

    Tony,
    There are 2 issues that can cause this.
    1 - The node name of the IIS server 'server1.acme.com' fails DNS lookup and the connector reverts to the the RMS server name to guarantee the alert is delivered to HPOM.
    2 - The connector uses the PrincipleName of the alert generated from SCOM. If the name does not resolve in DNS the connector will revert to the RMS server and use that to guarantee delivery to HPOM. There are a few MPs out there that do not set the PrincipleName
    correctly in the alert which causes this issue and it is really an MP issues and not a connector issues.
    There's an internal doc that addresses this and provides a workaround. If you'd like a copy you can send and email to [email protected] and replace the something with xplatext.
    Regards,
    -Steve

  • Node ID - Node Name

    Hi to all,
    has anybody an idea how I (ok - my SO) can get the node name or node id
    of a 'calling' client ?
    Thanks for any suggestion.
    /Ulf
    (diploma student)
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    While creating hierarchies, you could either select the char. (based on the external char. that you have specified) or make them as text nodes.
    The text nodes are not converted into char. automatically !!!!!!!
    Hope this helps.
    Cheers,
    Sumit

  • Virtual Host Name for CM

    Hi ,
    R12.1.3 & 11gR2 DB
    I have a qucik question . When We have Virtual Host Name for setting , What Should be the node name for ICM in Concurrent Manager Admin form.
    In One of our Instance : For ICM & Other Manager , its Virtual Host Name
    For Other : ICM : Physical Host Name & Other Manager Virtual Host Name .
    Which is good. We having a issue with ICM on both Nodes , in every minutes is going down and come up automatically.
    Regards
    Sourabh Gupta

    Hi Hussein,
    Thanks a lot. I have already review these document.
    Is Auto Failover With Virtual Hostnames For Concurrent Processing Servers Supported In 11i Or R12? (Doc ID 456540.1)
    Adding an Alias Hostname with Oracle E-Business Suite Release 12 (Doc ID 603883.1)
    Concurrent Processing - CONC-SM TNS FAIL In Internal Concurrent Manager (ICM) Log File With Virtual Hosts Configuration [ID 961216.1]
    ICM Not Starting: Node Name not Registered [ID 602942.1]
    I am curious what should be the node name in concurrent manager Administrator form.
    W ether is should be the virtual host name or physical host name.
    I have just checked with few people , Some Says ICM node name should be Physical server name & Other CM name can be Virtual name. I am not sure on what basis people are saying.
    Few says node name should be the physical host for every CM.
    Note Sure what is correct & best configuration.
    Regards
    Sourabh GUpta

  • Multiple MovieClips with same instance name

    I'm following a tower defence tutorial and part of the code is set up so I can build towers on the "grass" movie clip. I wanted to add more patches of "grass" and gave them all the same instance name so I can be able to place towers on them, but I have the problem that I can only place towers on the first item I placed and has the instance name of "grass". I can't seem to place towers on the other patches of grass.
    I removed the instance name of the first patch of grass and it let me build towers on the second patch, but the second patch only.
    I was following this tutorial: http://www.goofballgames.com/2010/01/31/how-to-build-a-tower-defense-f lash-game-part-2-placing-towers/
    Here is the code for it I believe:
    onClipEvent (load)
        active = 0;
    onClipEvent (enterFrame)
        if (active == 1)
            setProperty("", _x, int((_root._xmouse - 10) / 20) * 20 + 20);
            setProperty("", _y, int((_root._ymouse - 10) / 20) * 20 + 20);
      hitTestOnGrassMovieClip = _root.grass.hitTest(_x, _y, 1);
            if (hitTestOnGrassMovieClip) {
                gotoAndStop(1);
       _root.ranger.gotoAndStop(1);
            else {
                gotoAndStop(2);
       _root.ranger.gotoAndStop(2);
            _root.ranger._x = _x;
            _root.ranger._y = _y;
            _root.ranger._width = _root["tower_" + tower].range * 2;
            _root.ranger._height = _root["tower_" + tower].range * 2;
    on (press)
    hitTestOnGrassMovieClip = _root.grass.hitTest(_x, _y, 1);
    hitTestOnDeSelectMovieClip = _root.deselect.hitTest(_x, _y, 1);
        if (hitTestOnGrassMovieClip || hitTestOnDeSelectMovieClip) {
            if (hitTestOnGrassMovieClip) {
       ++_root.towerCount;
       _root["tower_" + tower].duplicateMovieClip("t" + _root.towerCount, 500 + _root.towerCount);
       a = _root["t" + _root.towerCount];
       a._x = _x;
       a._y = _y;
       a.active = 1;
      active = 0;
      setProperty("", _x, 1000);
      _root.selectedTower = "";
      _root.ranger._x = 1000;
      _root.ranger._width = 10;
      _root.ranger._height = 10; 
    }

    1.  You cannot use the same instance names for different objects and expect more than one to be targeted.  You need to assign unique names, or you can store references to them in an array and use the array to target them.
    2. You are posting AS2 code in the AS3 forum.  You should repost in the AS2 forum.  http://forums.adobe.com/community/flash/flash_actionscript

  • How to use same Bonjour Names on two Airport devices?

    Is there a way to set and keep using the same Bonjour names for all devices on a network with an Airport Time Capsule Base Station as the main WiFi router and an Airport Express Base Station as a backup WiFi router? 
    (e.g. to save the config file of ATCBS and restore to AEBS.)

    Use a service which lets you sync contacts between devices e.g. Apple iCloud, Gmail with Contacts etc.

  • SAM Account Name atribute

    Hi all,
    have an issue in Orchestrator which I am trying to debug but after reading some posts on TechNET I am not sure anymore it can be done. To the point. I am creating new mailbox via orchestrator, it's creating user, mailbox... everything is fine. Creating
    name of the mailbox, but when creating ACL for the mailbox, and SAM account name for it, it always croppes the name to 20 characters lenght, because of that somethimes I tend to get an error, that such SAM account name already exisits and mailbox cannot be
    created to the end by orchestrator. On the other hand, creating such mailbox, and giving it some account name manually allows to put there more characters than only 20. I know 20-characters limit comes form desire to be compatible with pre WIN2000 systems,
    hovewer is there a way to change it in Orchestrator or this is pre-defined and it's just the way it is.
    In my company we don't need to keep this 20-characters limitation, neccesarly...
    Thanks for all imput on that,

    Hi Friends
    In Lync 2010/Outlook 2010 clients can show the field "Alias" while the same field is not visible in 2013.My question is, whether we have any option to make this also visible on Lync/Outlook.
    In our company if Sam account name is A12345 then “Alias” will be the same .Also his internal phone number will be 12345 and his DID number will be Tel:+xxxxxxxxxxx;Ext:12345. Hence it is very
    important for us to display ”Alias”  it in the user property page in Outlook /Lync.
    -Sachin

Maybe you are looking for